util/mkbimage - grub4dos-solaris - Rivoreo Source Code Repositories

 #!/bin/sh
 # MaKe a Bootable IMAGE --- 1.44, 2.88 and El Torito no-emulation mode
 # C) 2001,2002,2003 Thierry Laronde <tlaronde@polynum.org>
 # C) 2001,2002,2003 Robert Millan <robertmh@gnu.org>


 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2, or (at your option)
 # any later version.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, you can either send email to this
 # program's maintainer or write to: The Free Software Foundation,
 # Inc.; 59 Temple Place, Suite 330; Boston, MA 02111-1307, USA.

 # $Id$

 # Global variables
 tarfile=
 dir=
 fs= #file system type
 decompress=
 image_type=
 uname=`uname -s`
 PATH=/sbin:$PATH

 # You can set GRUB_PATH  if you need to use a specially located GRUB.
 # This MUST end by a '/'!


 #----------------------------DON'T CHANGE: INTERNALS

 block_size=512
 cylinders=
 heads=
 sectors=
 cyl_size=
 type_option=
 geo_option=
 image=
 bk_120=$((2 * 15 * 80))
 bk_144=$((2 * 18 * 80))
 bk_288=$((2 * 36 * 80))
 bk_160=$((2 * 20 * 80))
 bk_168=$((2 * 21 * 80))
 bk_174=$((2 * 21 * 83))
 lo_options=
 device_map=
 mkfs_options=
 debug=
 stage2_os_name=

 # Name by which this script was invoked.
 program=`echo "$0" | sed -e 's/[^\/]*\///g'`
 version_number='$Revision$'

 usage="
 Usage: $program [-hVF] [-t TYPE] [-d DIRECTORY] [-s FS_TYPE] -f TAR_FILE
 Make a Bootable IMAGE using GRUB as a bootloader

 Options:
  Actions:
  -d DIRECTORY [default CWD]
 	    Directory where the boot.image and the partition subdirectories
 	    are/will be created
  -f TAR_FILE
 	    Name of the tar file containing the filesystem to install. Can
 	    be a pure tar file [.tar] or a compressed tar file
 	    [.tar.gz|.tar.bz2]
  -s FS_TYPE
 	    Type of the file system to create on the virtual disk. Choices
 	    are:
 		ext2 on GNU [default is ext2]
 		ext2, minix or msdos on GNU/Linux [default is ext2]

  -t TYPE
 	    Type of the image to create. Choices are '1.20', '1.44', '1.60',
 	    '1.68', '1.74', '2.88' or 'hd' [default is hd]
  -F
 	    Force to set the set_dpt flag (unnecessary 99% of the time! Be
 	    careful!
  Informations:
  -D
 	    turn Debugging on [xtrace]
  -h|--help
 	    display this Help and exit
  -V|--version
 	    display Version information and exit

 Copyright (c) 2001,2002,2003 Thierry Laronde <tlaronde@polynum.org>.
 Copyright (c) 2001,2002 Robert Millan <zeratul2@wanadoo.es>.
 GPLed."

 version="mkbimage $version_number

 Written by Thierry Laronde and Robert Millan.

 Copyright (c) 2001,2002,2003 Thierry Laronde <tlaronde@polynum.org>.
 Copyright (c) 2001,2002,2003 Robert Millan <zeratul2@wanadoo.es>.

 This is free software under the GPL version 2 or later; see the source for
 copying conditions.  There is NO warranty, not even for MERCHANTABILITY or
 FITNESS FOR A PARTICULAR PURPOSE."

 # Functions

 error ()
 {
 	case $1 in
 	bug) echo "This is a bug!";
 		echo "$usage";;
 	option) echo "Unknow option"; echo "$usage";;
 	missing_argument) echo "You must give an argument to the option!";
 		echo "$usage";;
 	missing_option) echo "You must indicate at least one option!";
 		echo "$usage";;
 	must_be_root) echo "You must be root! (or install e2tools/mtools)";;
 	unknown_fs)	if [ $uname = Linux ];
 				then echo "The GNU/Linux supported fs are: ext2, minix or msdos!";
 			elif [ $uname = GNU ];
 				then echo "The GNU supported fs is ext2!";
 			fi;;
 	unknown_format) echo "The tar file must be .tar|.tar.gz|.tar.bz2!";;
 	wont_fit) echo "The files won't fit on the selected type of media!";;
 	wrong_directory) echo "Directory inexistant or not given!";
 		echo "$usage";;
 	wrong_file) echo "File inexistant or empty!";
 		echo "$usage";;
 	wrong_type) echo "The type specified is not a valid one!";
 		echo "$usage";;
 	esac
 	exit 1
 }

 # create a filesystem of type $fs in $image with offset $offset
 mkbimage_mkfs ()
 {
   case $offset in
     0)  lo_options="";;
     *) lo_options="-o $offset";;
   esac

   if [ "$offset" = "0" ] ; then
     mkfs.$fs -F $image
   elif [ `id -u` = "0" ] ; then
     losetup $lo_options /dev/loop1 $image
     mkfs.$fs /dev/loop1
     losetup -d /dev/loop1
   else
     error must_be_root
   fi
 }

 # copy ${image}1/* to ${image}:/, assuming ${image} contains a filesystem
 # of type $fs in offset $offset
 mkbimage_cp ()
 {
   case $offset in
     0)  lo_options="";;
     *)  lo_options="-o $offset";;
   esac
   case $fs in
     ext2)
       cp="e2cp";
       mkdir="e2mkdir";;
     vfat)
       cp="mcopy";
       mkdir="mmd";;
     *)
       cp="";
       mkdir="";;
   esac

   if [ "$offset" = 0 ] && which $cp > /dev/null ; then
     for dir in $(cd ${image}1 && find -type d) ; do
 	$mkdir ${image}:$dir
     done
     for file in $(cd ${image}1 && find -type f) ; do
 	$cp ${image}1/$file ${image}:$file
     done
   elif [ "`id -u`" = "0" ] ; then
     losetup $lo_options /dev/loop1 $image
     mkdir ${image}.mnt
     mount -t $fs /dev/loop1 ${image}.mnt
     cp -a ${image}1/* ${image}.mnt/ && sync
     umount ${image}.mnt
     rmdir ${image}.mnt
     losetup -d /dev/loop1
   else
     error must_be_root
   fi
 }

 #**********************************************************************
 #                          MAIN PROGRAM                               *
 #**********************************************************************

 #---------------------- Getting the options

 [ $# -eq 0 ] && error missing_option;

 while [ $# -gt 0 ]; do
 	case "$1" in
 		-d) shift;
 			dir="$1";
 			[ ! -d "$1" ] && error wrong_directory;;
 		-f) shift;
 			tarfile="$1";
 			[ -z "$tarfile" ] && error missing_argument;;
 		-s) shift;
 			fs="$1";;
 		-t) shift;
 			image_type="$1";;
 		-F) geo_option="-F";;
 		-D) debug="-v";
 		    set -x;;
 		-h|--help) echo "$usage"; exit 0;;
 		-V|--version) echo "$version"; exit 0;;
 	 	*) error option ;;
 	esac
 shift
 done
 #---------------------- Sanity checks
 [ ! "$tarfile" ] && error missing_argument;
 [ ! -s "$tarfile" ] && error wrong_file;

 if [ ! "$image_type" ]; then
 	image_type=hd;
 elif [ "$image_type" != "1.20" ] && [ "$image_type" != "1.44" ] \
   && [ "$image_type" != "1.60" ] && [ "$image_type" != "1.68" ] \
   && [ "$image_type" != "2.88" ] && [ "$image_type" != "1.74" ] \
   && [ "$image_type" != "hd" ] && [ "$image_type" != "1.60" ] ; then
   error wrong_type ;
 fi

 [ ! "$fs" ] && fs=ext2

 # Carlo Contavalli reported that I [TL] have forgotten to specify the
 # partition ID for sfdisk to correctly fill the partition table (ext2 is the
 # default on Linux, so this worked in this case...). This is fixed below.
 case "$fs" in
 	ext2) mkfs_options="-m 0";
 		  part_id="83";; # This is the default
 #	ufs)	if [ $uname = Linux ];
 #		then error unknown_fs;
 #		fi;;
 	minix)	if [ $uname = GNU ];
 		then error unknown_fs;
 		else
 			mkfs_options="-v"; # Minix version 2
 			part_id="81";
 		fi;;
 	msdos)	if [ $uname = GNU ];
 		then error unknown_fs;
 		else
 			mkfs_options="-f 1 -F 12"; # the smallest...
 			part_id="1";
 		fi;;
 	*) error unknown_fs;;
 esac

 # What type of tar file has been given ?

 suffix=`echo "$tarfile" | sed -n 's/^.*\.\([targbz2]\{2,3\}\)$/\1/p'`
 case "$suffix" in
 	tar) decompress="cat";;
 	gz) decompress="gunzip -c";;
 	bz2) decompress="bunzip2 -c";;
 	*) error unknown_format;;
 esac
 #---------------------- Initializations

 [ ! "$dir" ] && dir=`pwd`

 image=$dir/$image_type.image
 device_map=$dir/device.map

 # First, find the size of the tar file in block_size.
 file_size=`$decompress $tarfile | wc -c | tr -d ' '`
 file_size=$(($file_size / $block_size + 1))

 # Increase in order to be sure that with a fs there will be enough
 # room (trying 110%)
 file_size=$(($file_size + $file_size / 10))

 case "$image_type" in
   hd) heads=16;
     sectors=63;
     cyl_size=$((16 * 63));
     # Create the minimum number of cylinders. At the moment, we leave
     # some space by rounding everything up by adding 1 cylinder, plus
     # another one for MBR + reserved track.
     cylinders=$(($file_size / $cyl_size + 2));;
   1.20) [ $file_size -ge $bk_120 ] && error wont_fit;
     heads=2;
     sectors=15;
     cyl_size=$((2 * 15));
     cylinders=80;;
   1.44) [ $file_size -ge $bk_144 ] && error wont_fit;
     heads=2;
     sectors=18;
     cyl_size=$((2 * 18));
     cylinders=80;;
   1.60) [ $file_size -ge $bk_160 ] && error wont_fit;
     heads=2;
     sectors=20;
     cyl_size=$((2 * 20));
     cylinders=80;
     geo_option="-F";;
   1.68) [ $file_size -ge $bk_168 ] && error wont_fit;
     heads=2;
     sectors=21;
     cyl_size=$((2 * 21));
     cylinders=80;;
   1.74) [ $file_size -ge $bk_174 ] && error wont_fit;
     heads=2;
     sectors=21;
     cyl_size=$((2 * 21));
     cylinders=83;;
   2.88) [ $file_size -ge $bk_288 ] && error wont_fit;
     heads=2;
     sectors=36;
     cyl_size=$((2 * 36));
     cylinders=80;;
   *) error bug;;
 esac

 type_option="-t $image_type"

 # We start by creating a virtual disk which size is the number of
 # cylinders of $cyl_size mandatory to put the files stocked in the $tarfile
 # Create the empty virtual disk
 dd if=/dev/zero of=$image bs=$block_size count=$(($cyl_size * $cylinders))

 # We then format the virtual disk
 # NOTE: the El Torito specification wants only one partition. So we
 # create the first, and the remaining 3 entries are empty.

 if [ "$image_type" = "hd" ]; then
   sfdisk -C $cylinders -H $heads -S $sectors -D $image<<EOT
 ,,$part_id,*,0,1,1


 EOT
   offset="$(($sectors * $block_size))"
   type_option=
 else
   offset="0"
 fi

 # It's time now to create the filesystem on the first partition.
 mkbimage_mkfs

 # then untar the files
 [ ! -e ${image}1 ] || { echo "${image}1 exists, please remove it first"; exit 1;}
 mkdir -p ${image}1
 $decompress $tarfile | tar -C ${image}1 $debug -xf -

 # copy the untarred files into the filesystem image
 mkbimage_cp

 #We verify that the stage2 exists and we search the name
 stage2_os_name=`find ${image}1 -name stage2 -type f`

 [ -r "$stage2_os_name" ] || { echo "I can't find stage2!"; exit 1;}

 #------------------------- GRUB stuff
 if [ "$image_type" = "hd" ]; then
 	device='(hd0)'
 	root='(hd0,0)'
 else
 	device='(fd0)'
 	root='(fd0)'
 fi

 cat<<EOT >$device_map
 $device	${image}
 EOT

 ${GRUB_PATH}grub --device-map=$device_map --batch<<EOT
 geometry $device $cylinders $heads $sectors
 root $root
 setup $device
 geometry $geo_option -w $type_option $device $cylinders $heads $sectors
 EOT

 echo "-------------------WHAT'S NEXT?-------------------------------------"
 echo

 cat <<EOF
 If you have created an image aimed to a floppy, then something like:

 dd if=<type>.image of=/dev/fd0[u<size>] bs=512

 will be more than enough... if you have formated the floppy correctly
 using \`superformat' to be found in \`fdutils' package.

 For El Torito floppy emulation :

 mkisofs -b <image> -c boot.catalog -o raw.iso <dir>

 And for El Torito Hard Disk emulation:

 mkisofs -b <image> -hard-disk-boot -c boot.catalog -o raw.iso <dir>

 Enjoy!
 EOF

 rm -rf ${image}1

 exit 0
	#!/bin/sh
	# MaKe a Bootable IMAGE --- 1.44, 2.88 and El Torito no-emulation mode
	# C) 2001,2002,2003 Thierry Laronde <tlaronde@polynum.org>
	# C) 2001,2002,2003 Robert Millan <robertmh@gnu.org>


	# This program is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 2, or (at your option)
	# any later version.
	#
	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License
	# along with this program; if not, you can either send email to this
	# program's maintainer or write to: The Free Software Foundation,
	# Inc.; 59 Temple Place, Suite 330; Boston, MA 02111-1307, USA.

	# $Id$

	# Global variables
	tarfile=
	dir=
	fs= #file system type
	decompress=
	image_type=
	uname=`uname -s`
	PATH=/sbin:$PATH

	# You can set GRUB_PATH if you need to use a specially located GRUB.
	# This MUST end by a '/'!


	#----------------------------DON'T CHANGE: INTERNALS

	block_size=512
	cylinders=
	heads=
	sectors=
	cyl_size=
	type_option=
	geo_option=
	image=
	bk_120=$((2 * 15 * 80))
	bk_144=$((2 * 18 * 80))
	bk_288=$((2 * 36 * 80))
	bk_160=$((2 * 20 * 80))
	bk_168=$((2 * 21 * 80))
	bk_174=$((2 * 21 * 83))
	lo_options=
	device_map=
	mkfs_options=
	debug=
	stage2_os_name=

	# Name by which this script was invoked.
	program=`echo "$0" \| sed -e 's/[^\/]*\///g'`
	version_number='$Revision$'

	usage="
	Usage: $program [-hVF] [-t TYPE] [-d DIRECTORY] [-s FS_TYPE] -f TAR_FILE
	Make a Bootable IMAGE using GRUB as a bootloader

	Options:
	Actions:
	-d DIRECTORY [default CWD]
	Directory where the boot.image and the partition subdirectories
	are/will be created
	-f TAR_FILE
	Name of the tar file containing the filesystem to install. Can
	be a pure tar file [.tar] or a compressed tar file
	[.tar.gz\|.tar.bz2]
	-s FS_TYPE
	Type of the file system to create on the virtual disk. Choices
	are:
	ext2 on GNU [default is ext2]
	ext2, minix or msdos on GNU/Linux [default is ext2]

	-t TYPE
	Type of the image to create. Choices are '1.20', '1.44', '1.60',
	'1.68', '1.74', '2.88' or 'hd' [default is hd]
	-F
	Force to set the set_dpt flag (unnecessary 99% of the time! Be
	careful!
	Informations:
	-D
	turn Debugging on [xtrace]
	-h\|--help
	display this Help and exit
	-V\|--version
	display Version information and exit

	Copyright (c) 2001,2002,2003 Thierry Laronde <tlaronde@polynum.org>.
	Copyright (c) 2001,2002 Robert Millan <zeratul2@wanadoo.es>.
	GPLed."

	version="mkbimage $version_number

	Written by Thierry Laronde and Robert Millan.

	Copyright (c) 2001,2002,2003 Thierry Laronde <tlaronde@polynum.org>.
	Copyright (c) 2001,2002,2003 Robert Millan <zeratul2@wanadoo.es>.

	This is free software under the GPL version 2 or later; see the source for
	copying conditions. There is NO warranty, not even for MERCHANTABILITY or
	FITNESS FOR A PARTICULAR PURPOSE."

	# Functions

	error ()
	{
	case $1 in
	bug) echo "This is a bug!";
	echo "$usage";;
	option) echo "Unknow option"; echo "$usage";;
	missing_argument) echo "You must give an argument to the option!";
	echo "$usage";;
	missing_option) echo "You must indicate at least one option!";
	echo "$usage";;
	must_be_root) echo "You must be root! (or install e2tools/mtools)";;
	unknown_fs) if [ $uname = Linux ];
	then echo "The GNU/Linux supported fs are: ext2, minix or msdos!";
	elif [ $uname = GNU ];
	then echo "The GNU supported fs is ext2!";
	fi;;
	unknown_format) echo "The tar file must be .tar\|.tar.gz\|.tar.bz2!";;
	wont_fit) echo "The files won't fit on the selected type of media!";;
	wrong_directory) echo "Directory inexistant or not given!";
	echo "$usage";;
	wrong_file) echo "File inexistant or empty!";
	echo "$usage";;
	wrong_type) echo "The type specified is not a valid one!";
	echo "$usage";;
	esac
	exit 1
	}

	# create a filesystem of type $fs in $image with offset $offset
	mkbimage_mkfs ()
	{
	case $offset in
	0) lo_options="";;
	*) lo_options="-o $offset";;
	esac

	if [ "$offset" = "0" ] ; then
	mkfs.$fs -F $image
	elif [ `id -u` = "0" ] ; then
	losetup $lo_options /dev/loop1 $image
	mkfs.$fs /dev/loop1
	losetup -d /dev/loop1
	else
	error must_be_root
	fi
	}

	# copy ${image}1/* to ${image}:/, assuming ${image} contains a filesystem
	# of type $fs in offset $offset
	mkbimage_cp ()
	{
	case $offset in
	0) lo_options="";;
	*) lo_options="-o $offset";;
	esac
	case $fs in
	ext2)
	cp="e2cp";
	mkdir="e2mkdir";;
	vfat)
	cp="mcopy";
	mkdir="mmd";;
	*)
	cp="";
	mkdir="";;
	esac

	if [ "$offset" = 0 ] && which $cp > /dev/null ; then
	for dir in $(cd ${image}1 && find -type d) ; do
	$mkdir ${image}:$dir
	done
	for file in $(cd ${image}1 && find -type f) ; do
	$cp ${image}1/$file ${image}:$file
	done
	elif [ "`id -u`" = "0" ] ; then
	losetup $lo_options /dev/loop1 $image
	mkdir ${image}.mnt
	mount -t $fs /dev/loop1 ${image}.mnt
	cp -a ${image}1/* ${image}.mnt/ && sync
	umount ${image}.mnt
	rmdir ${image}.mnt
	losetup -d /dev/loop1
	else
	error must_be_root
	fi
	}

	#**********************************************************************
	# MAIN PROGRAM *
	#**********************************************************************

	#---------------------- Getting the options

	[ $# -eq 0 ] && error missing_option;

	while [ $# -gt 0 ]; do
	case "$1" in
	-d) shift;
	dir="$1";
	[ ! -d "$1" ] && error wrong_directory;;
	-f) shift;
	tarfile="$1";
	[ -z "$tarfile" ] && error missing_argument;;
	-s) shift;
	fs="$1";;
	-t) shift;
	image_type="$1";;
	-F) geo_option="-F";;
	-D) debug="-v";
	set -x;;
	-h\|--help) echo "$usage"; exit 0;;
	-V\|--version) echo "$version"; exit 0;;
	*) error option ;;
	esac
	shift
	done
	#---------------------- Sanity checks
	[ ! "$tarfile" ] && error missing_argument;
	[ ! -s "$tarfile" ] && error wrong_file;

	if [ ! "$image_type" ]; then
	image_type=hd;
	elif [ "$image_type" != "1.20" ] && [ "$image_type" != "1.44" ] \
	&& [ "$image_type" != "1.60" ] && [ "$image_type" != "1.68" ] \
	&& [ "$image_type" != "2.88" ] && [ "$image_type" != "1.74" ] \
	&& [ "$image_type" != "hd" ] && [ "$image_type" != "1.60" ] ; then
	error wrong_type ;
	fi

	[ ! "$fs" ] && fs=ext2

	# Carlo Contavalli reported that I [TL] have forgotten to specify the
	# partition ID for sfdisk to correctly fill the partition table (ext2 is the
	# default on Linux, so this worked in this case...). This is fixed below.
	case "$fs" in
	ext2) mkfs_options="-m 0";
	part_id="83";; # This is the default
	# ufs) if [ $uname = Linux ];
	# then error unknown_fs;
	# fi;;
	minix) if [ $uname = GNU ];
	then error unknown_fs;
	else
	mkfs_options="-v"; # Minix version 2
	part_id="81";
	fi;;
	msdos) if [ $uname = GNU ];
	then error unknown_fs;
	else
	mkfs_options="-f 1 -F 12"; # the smallest...
	part_id="1";
	fi;;
	*) error unknown_fs;;
	esac

	# What type of tar file has been given ?

	suffix=`echo "$tarfile" \| sed -n 's/^.*\.\([targbz2]\{2,3\}\)$/\1/p'`
	case "$suffix" in
	tar) decompress="cat";;
	gz) decompress="gunzip -c";;
	bz2) decompress="bunzip2 -c";;
	*) error unknown_format;;
	esac
	#---------------------- Initializations

	[ ! "$dir" ] && dir=`pwd`

	image=$dir/$image_type.image
	device_map=$dir/device.map

	# First, find the size of the tar file in block_size.
	file_size=`$decompress $tarfile \| wc -c \| tr -d ' '`
	file_size=$(($file_size / $block_size + 1))

	# Increase in order to be sure that with a fs there will be enough
	# room (trying 110%)
	file_size=$(($file_size + $file_size / 10))

	case "$image_type" in
	hd) heads=16;
	sectors=63;
	cyl_size=$((16 * 63));
	# Create the minimum number of cylinders. At the moment, we leave
	# some space by rounding everything up by adding 1 cylinder, plus
	# another one for MBR + reserved track.
	cylinders=$(($file_size / $cyl_size + 2));;
	1.20) [ $file_size -ge $bk_120 ] && error wont_fit;
	heads=2;
	sectors=15;
	cyl_size=$((2 * 15));
	cylinders=80;;
	1.44) [ $file_size -ge $bk_144 ] && error wont_fit;
	heads=2;
	sectors=18;
	cyl_size=$((2 * 18));
	cylinders=80;;
	1.60) [ $file_size -ge $bk_160 ] && error wont_fit;
	heads=2;
	sectors=20;
	cyl_size=$((2 * 20));
	cylinders=80;
	geo_option="-F";;
	1.68) [ $file_size -ge $bk_168 ] && error wont_fit;
	heads=2;
	sectors=21;
	cyl_size=$((2 * 21));
	cylinders=80;;
	1.74) [ $file_size -ge $bk_174 ] && error wont_fit;
	heads=2;
	sectors=21;
	cyl_size=$((2 * 21));
	cylinders=83;;
	2.88) [ $file_size -ge $bk_288 ] && error wont_fit;
	heads=2;
	sectors=36;
	cyl_size=$((2 * 36));
	cylinders=80;;
	*) error bug;;
	esac

	type_option="-t $image_type"

	# We start by creating a virtual disk which size is the number of
	# cylinders of $cyl_size mandatory to put the files stocked in the $tarfile
	# Create the empty virtual disk
	dd if=/dev/zero of=$image bs=$block_size count=$(($cyl_size * $cylinders))

	# We then format the virtual disk
	# NOTE: the El Torito specification wants only one partition. So we
	# create the first, and the remaining 3 entries are empty.

	if [ "$image_type" = "hd" ]; then
	sfdisk -C $cylinders -H $heads -S $sectors -D $image<<EOT
	,,$part_id,*,0,1,1


	EOT
	offset="$(($sectors * $block_size))"
	type_option=
	else
	offset="0"
	fi

	# It's time now to create the filesystem on the first partition.
	mkbimage_mkfs

	# then untar the files
	[ ! -e ${image}1 ] \|\| { echo "${image}1 exists, please remove it first"; exit 1;}
	mkdir -p ${image}1
	$decompress $tarfile \| tar -C ${image}1 $debug -xf -

	# copy the untarred files into the filesystem image
	mkbimage_cp

	#We verify that the stage2 exists and we search the name
	stage2_os_name=`find ${image}1 -name stage2 -type f`

	[ -r "$stage2_os_name" ] \|\| { echo "I can't find stage2!"; exit 1;}

	#------------------------- GRUB stuff
	if [ "$image_type" = "hd" ]; then
	device='(hd0)'
	root='(hd0,0)'
	else
	device='(fd0)'
	root='(fd0)'
	fi

	cat<<EOT >$device_map
	$device ${image}
	EOT

	${GRUB_PATH}grub --device-map=$device_map --batch<<EOT
	geometry $device $cylinders $heads $sectors
	root $root
	setup $device
	geometry $geo_option -w $type_option $device $cylinders $heads $sectors
	EOT

	echo "-------------------WHAT'S NEXT?-------------------------------------"
	echo

	cat <<EOF
	If you have created an image aimed to a floppy, then something like:

	dd if=<type>.image of=/dev/fd0[u<size>] bs=512

	will be more than enough... if you have formated the floppy correctly
	using \`superformat' to be found in \`fdutils' package.

	For El Torito floppy emulation :

	mkisofs -b <image> -c boot.catalog -o raw.iso <dir>

	And for El Torito Hard Disk emulation:

	mkisofs -b <image> -hard-disk-boot -c boot.catalog -o raw.iso <dir>

	Enjoy!
	EOF

	rm -rf ${image}1

	exit 0