Rivoreo Source Code Repositories
src.rivoreo.one / grub4dos-solaris / 28f2016a13d753763e7fd4f920bdbb943a16a733 / . / ChangeLog
blob: a11f3fb63e25606ca959aa37e56ecc77e491d4ea [file] [log] [blame] [raw]
1999-10-19 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* docs/Makefile.am (UNFINISHED_MANUALS): New variable.
(EXTRA_DIST): Added $(UNFINISHED_MANUALS).
* docs/new-grub.texi: New file.
1999-10-19 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* docs/Makefile.am (man_MANS): Added mbchk.1.
[MAINTAINER_MODE] (mbchk.1): New target.
* docs/mbchk.1: New file. Generated by help2man.
1999-10-18 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* Makefile.am (SUBDIRS): Added util.
* configure.in: Output util/Makefile.
* util/Makefile.am: New file.
* util/mbchk.c: Likewise.
* util/Makefile.in: Likewise. Generated by automake.
1999-10-17 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* docs/Makefile.am (.texi): Canceled because the dependecies can
be circulated.
* stage2/builtins.c (embed_func): Set BUF_TRACK to -1 before
writing the Stage 1.5 to the disk to clear the cache.
1999-10-17 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/boot.c (load_initrd): Change types of *RAMDISK and
MOVETO to unsigned long.
Apply the macro RAW_ADDR to MOVETO.
1999-10-16 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* docs/multiboot.texi: Include the example source files of a
Multiboot kernel.
* docs/src2texi: New file.
* docs/boot.S: Likewise.
* docs/multiboot.h: Likewise.
* docs/kernel.c: Likewise.
* docs/boot.S.texi: Likewise.
* docs/multiboot.h.texi: Likewise.
* docs/kernel.c.texi: Likewise.
* docs/Makefile.am (EXAMPLES): New varilable.
(multiboot_TEXINFOS): Likewise.
(SRC2TEXI): Likewise.
(noinst_SCRIPTS): Added $(SRC2TEXI).
(EXTRA_DIST): Added $(EXAMPLES) and $(multiboot_TEXINFOS).
(%.c.texi): New target.
(%.h.texi): Likewise.
(%.S.texi): Likewise.
1999-09-22 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* multiboot.texi (BIOS device mapping techniques): New section.
Stolen from bios_mapping.txt in grub-0.5.
(Data comparison technique): New subsection.
(I/O restriction technique): Likewise.
(Example OS code): Rewrited from scratch.
1999-09-21 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* multiboot.texi: Rename Multiboot Standard to Multiboot
Specification and upgrade the version to 0.7. Many cleanups
are done.
1999-10-15 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/builtins.c (setup_func): Save CURRENT_DRIVE and
CURRENT_PARTITION into IMAGE_DRIVE and IMAGE_PARTITION
respectively, and restore them before running install_func.
Use DEVICE instead of BUFFER to store the device name.
Change each type of STAGE1, STAGE2 and CONFIG_FILE to an array
of char.
If installing the Stage 1 into a MBR, embed the Stage 1.5 in the
sectors right after it.
Return the result of install_func instead of zero.
1999-10-14 Pavel Roskin <pavel_roskin@geocities.com>
* configure.in: Check for opendisk in libutil.
* grub/asmstub.c [__FreeBSD__ || __NetBSD__]: Include
<sys/ioctl.h>.
[HAVE_OPENDISK]: Include <util.h>.
[__NetBSD__] (get_floppy_disk_name): Added support for NetBSD.
[__NetBSD__ && HAVE_OPENDISK] (get_ide_disk_name): Likewise.
[__NetBSD__ && HAVE_OPENDISK] (get_scsi_disk_name): Likewise.
(get_drive_geometry) [__NetBSD__]: Use for NetBSD the same ioctl
as for FreeBSD.
1999-10-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/asmstub.c (assign_device_name): If DEVICE is NULL, set
DEVICE_MAP[DRIVE] to NULL.
(get_diskinfo): If open or read fails, call assign_device_name
to disable accessing the drive DRIVE.
(grub_stage2): The device mapping routine is moved to ...
(init_device_map): ... here. This new function also reads/writes
a device map file. If DEVICE_MAP_FILE already exists, then use
the data in it instead of probing devices. Otherwise, guess the
map between BIOS drives and OS devices, and write it to the file
DEVICE_MAP_FILE if it can be opened.
* grub/main.c (device_map_file): New variable.
(default_device_map_file): Likewise.
(OPT_DEVICE_MAP): New macro.
(longopts): Added an entry for "device-map".
(usage): Print the usage about --device-map as well.
(main): Set DEFAULT_DEVICE_MAP_FILE to DEVICE_MAP_FILE. If
OPT_DEVICE_MAP is found, set DEVICE_MAP_FILE to a duplicated
string of OPTARG.
* stage2/shared.h [GRUB_UTIL] (device_map_file): Declared.
* docs/grub.8: Regenerated.
1999-10-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/builtins.c (color_func): Do not set NORMAL_COLOR or
HIGHLIGHT_COLOR directly, but use NEW_NORMAL_COLOR and
NEW_HIGHLIGHT_COLOR as temporary storages instead.
New internal function `color_number' is used to convert a
symbolic color representation into a color number.
Try color_number at first, and if fails, then try
safe_parse_maxint for each of NORMAL and HIGHLIGHT.
(builtin_color): The long doc does not describe the raw number
syntax but the symbolic color name syntax.
* docs/grub.texi (Commands): Adjusted to the long doc of
BUILTIN_COLOR.
* docs/menu.lst: Add examples of "fallback" and "color".
1999-10-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/char_io.c [!STAGE1_5] (get_cmdline): If C is a newline
or a return, then set LPOS to LLEN and call the function
cl_setcpos.
[!STAGE1_5] (grub_strncat): New function.
* stage2/builtins.c (embed_func): New function.
(builtin_embed): New varilable.
(setup_func): New function.
(builtin_setup): New varilable.
(builtin_table): Added a pointer to BUILTIN_EMBED and a pointer
to BUILTIN_SETUP.
* stage2/shared.h (grub_strncat): Declared.
* stage2/Makefile.am (stage2_size.h): ../stage2/stage2 ->
pre_stage2. Reported by Pavel Roskin.
1999-10-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From Pavel Roskin:
* acinclude.m4 (grub_PROG_OBJCOPY_ABSOLUTE): main -> cmain.
* stage2/boot.c (load_image): Only CUR_ADDR, not ENTRY_ADDR
should be 1M-aligned for NetBSD. Don't align symbol table on 4k
boundaries if the kernel doesn't require it.
1999-10-10 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/asm.S [!STAGE1_5] (start): New label to force ld quiet.
[!STAGE1_5] (_start): Likewise.
* stage2/builtins.c (install_func): Rewritten heavily almost
from scratch. As the blocklist was moved to the first sector of
Stage 2, always write sectors of Stage 2 to the disk.
* stage1/stage1.h (STAGE1_STAGE2_SECTOR): 0x40 -> 0x41.
(STAGE1_STAGE2_ADDRESS): 0x44 -> 0x45.
(STAGE1_STAGE2_SEGMENT): 0x46 -> 0x47.
(STAGE1_BOOT_DRIVE): 0x3f -> 0x40.
1999-10-09 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
Stage1 supports both the CHS mode and the LBA mode.
* stage1/Makefile.am (nodist_pkgdata_DATA): Removed stage1_lba.
(BUILT_SOURCES): Deleted.
(CLEANFILES): Likewise.
(noinst_PROGRAMS): Removed stage1_lba.exec.
(stage1_exec_SOURCES): Removed stage2_size.h.
(stage2_size.h): Deleted.
(stage1_lba_exec_SOURCES): Likewise.
* stage1/stage1.S: Rewritten from scratch.
* stage1/stage1_lba.S: Deleted.
* stage1/stage1.h (COMPAT_VERSION_MAJOR): Set to 3.
(COMPAT_VERSION_MINOR): Set to 0.
(STAGE1_VER_MAJ_OFFS): Set to 0x3e.
(STAGE1_FIRSTLIST): Deleted.
(STAGE1_INSTALLSEG): Likewise.
(STAGE1_INSTALLADDR): Likewise.
(STAGE1_MINPARAMSIZE): Likewise.
(STAGE1_LISTSIZE): Likewise.
(STAGE1_ID_OFFSET): Likewise.
(STAGE1_ID_CHS): Likewise.
(STAGE1_ID_LBA): Likewise.
(STAGE1_STAGE2_SECTOR): New macro.
(STAGE1_STAGE2_ADDRESS): Likewise.
(STAGE1_STAGE2_SEGMENT): Likewise.
(STAGE1_BOOT_DRIVE): Likewise.
* stage2/start.S: New file.
* stage2/Makefile.am (noinst_DATA): New variable.
(CLEANFILES): Set to "$(nodist_pkgdata_DATA) $(noinst_DATA)
$(BUILT_SOURCES)".
(noinst_PROGRAMS): Removed stage2.exec, and added start.exec and
pre_stage2.exec.
(STAGE2_LINK): Deleted.
(PRE_STAGE2_LINK): New variable.
(START_LINK): Likewise.
(stage2_exec_SOURCES): Deleted.
(stage2_exec_CFLAGS): Likewise.
(stage2_exec_LDFLAGS): Likewise.
[NETBOOT_SUPPORT] (stage2_exec_LDADD): Likewise.
(pre_stage2_exec_SOURCES): New variable.
(pre_stage2_exec_CFLAGS): Likewise.
(pre_stage2_exec_LDFLAGS): Likewise.
[NETBOOT_SUPPORT] (pre_stage2_exec_LDADD): Likewise.
(BUILT_SOURCES): Likewise.
(start_exec_SOURCES): Likewise.
(start_exec_CFLAGS): Likewise.
(start_exec_LDFLAGS): Likewise.
(start_exec_DEPENDENCIES): Likewise.
(stage2_size.h): New rule.
(stage2): Likewise.
(e2fs_stage1_5_exec_SOURCES): Added start.S.
(fat_stage1_5_exec_SOURCES): Likewise.
(ffs_stage1_5_exec_SOURCES): Likewise.
(minix_stage1_5_exec_SOURCES): Likewise.
* stage2/asm.S (start): Renamed to ...
(main): ... this.
[STAGE1_5] (main): Jump to (codestart - EXT_C(main) + 0x2200)
instead of (codestart - EXT_C(start) + 0x2000).
[!STAGE1_5] (main): Jump to (codestart - EXT_C(main) + 0x8200)
instead of (codestart - EXT_C(start) + 0x8000).
[STAGE1_5] (chain_stage2): Use main instead of start.
* stage2/shared.h (BOOTSEC_LISTSIZE): New macro.
* stage2/stage1_5.c: Change the second argument for chain_stage2
to 0x8200.
1999-10-08 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* configure.in (--with-binutils): New option to specify a
directory to find binutils.
(CFLAGS): If WITH_BINUTILS is not empty, added the option `-B'.
(LD): Do not check for this. We don't use ld directly anyway.
(RANLIB): If WITH_BINUTILS is not empty, search the directory
WITH_BINUTILS first.
(OBJCOPY): Likewise.
* acinclude.m4 (grub_ASM_USCORE): Add CFLAGS into
AC_TRY_COMMAND.
(grub_ASM_ADDR32): Likewise.
(grub_ASM_PREFIX_REQUIREMENT): Likewise.
(grub_PROG_OBJCOPY_ABSOLUTE): Use CC instead of LD.
1999-10-04 Pavel Roskin <pavel_roskin@geocities.com>
* stage2/freebsd.h (struct bootinfo): New member, bi_bios_dev.
* stage2/boot.c (bsd_boot): Set BI.BI_BIOS_DEV to SAVED_DRIVE.
1999-10-04 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From Pavel Roskin:
* docs/grub.texi: Fix typos.
* stage2/builtins.c (install_func): Reformat the warning message
about the option `d'.
1999-10-03 Gordon Matzigkeit <gord@fig.org>
* stage2/builtins.c (install_func): Fix check for the Stage 2 id.
From Pavel Roskin.
* debian/Makefile.am (EXTRA_DIST): Add postinst and prerm.
1999-10-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/builtins.c (boot_func): Pass MBI.CMDLINE instead of ARG
to bsd_boot.
1999-10-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/gunzip.c (gunzip_test_header): Check if CURRENT_DRIVE
is 0x20 instead of if the fs type is TFTP, because GRUB does not
mount CURRENT_DRIVE when using a block file. Reported by Pavel
Roskin.
1999-10-02 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/builtins.c (cat_func): Do not read the whole of a file
at one time. Instead, repeat reading one byte and print it on
the screen.
* docs/grub.texi (Command line): List the available key
bindings.
(Commands): Added descriptions about "geometry", "device" and
"cat".
1999-10-02 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
Now it is possible to build the grub shell with old BSD curses.
* stage2/shared.h [!A_NORMAL] (A_NORMAL): Set to zero.
[!A_REVERSE && A_STANDOUT] (A_REVERSE): Set to A_STANDOUT.
[!A_REVERSE && !A_STANDOUT] (A_REVERSE): Set to zero.
1999-09-30 Pavel Roskin <pavel_roskin@geocities.com>
* stage2/disk_io.c (set_bootdev): Mask 0x7F instead of 0x79 of
the device number.
1999-10-01 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* configure.in (--without-curses): New option. If WITH_CURSES is
no, do not check for curses.
* stage2/disk_io.c (set_device) [STAGE1_5]: Change the type of
DEV to unsigned long.
* stage2/builtins.c (install_func): Always check for the Stage 2
id in FILE.
Reported by Pavel Roskin.
1999-09-30 Gordon Matzigkeit <gord@fig.org>
* debian/postinst: New file to call install-info.
* debian/prerm: Likewise.
* debian/rules (binary-arch): Add postinst and prerm, compress the
info files, and call dpkg-shlibdeps.
* stage2/cmdline.c (skip_to): Restructure, and count tabs as
whitespace.
(find_command): Likewise.
1999-09-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/getopt.c: Moved to ...
* lib/getopt.c: ... here.
* grub/getopt1.c: Moved to ...
* lib/getopt1.c: ... here.
* grub/getopt.h: Moved to ...
* lib/getopt.h: ... here.
* grub/Makefile.am (AM_CFLAGS): Added -I$(top_srcdir)/lib.
(grub_LDADD): Added ../lib/libcommon.a.
* lib/Makefile.am: New file.
* Makefile.am (SUBDIRS): Added lib.
* configure.in: lib/Makefile is added into the arguments for
AC_OUTPUT.
1999-09-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From Pavel Roskin:
* stage2/defs.h (time_t): Renamed to ...
(mach_time_t): ... this.
(daddr_t): Renamed to ...
(mach_daddr_t): ... this.
(uid_t): Renamed to ...
(mach_uid_t): ... this.
(gid_t): Renamed to ...
(mach_gid_t): ... this.
(ino_t): Renamed to ...
(mach_ino_t): ... this.
* stage2/disk_inode.h (FFS_MAX_FASTLINK_SIZE): Use mach_daddr_t
instead of daddr_t.
(struct icommon): Use mach_uid_t, mach_gid_t, mach_time_t and
mach_daddr_t, instead of uid_t, gid_t, time_t and daddr_t.
* stage2/fs.h (BBLOCK): Use mach_daddr_t instead of addr_t.
(SBLOCK): Likewise.
(ROOTINO): Use mach_ino_t instead of ino_t.
(struct fs): Use mach_daddr_t and mach_time_t instead of daddr_t
and time_t.
(struct cg): Use mach_time_t instead of time_t.
(struct ocg): Likewise.
(cgbase): Use mach_daddr_t instead of daddr_t.
(itod): Likewise.
1999-09-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* acinclude.m4 (grub_CHECK_START_SYMBOL): Use AC_TRY_LINK
instead of AC_TRY_COMMAND.
(grub_CHECK_USCORE_START_SYMBOL): Likewise.
(grub_CHECK_END_SYMBOL): Likewise.
(grub_CHECK_USCORE_END_SYMBOL): Likewise.
* stage2/disk_io.c (set_device) [!STAGE1_5]: Use RESULT instead
of RETVAL to check if the analysis succeeds.
1999-09-29 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/builtins.c (install_func): If the Stage 2 id in FILE is
not STAGE2_ID_STAGE2, set IS_STAGE1_5 to 1, otherwise to 0.
Use CONFIG_FILE_LOCATION to point to the location of the name of
a configuration file in Stage 2.
If the option `p' is present and IS_STAGE1_5 is non-zero, reset
the device information in CONFIG_FILE_LOCATION.
(cat_func): New function.
(builtin_cat): New variable.
(builtin_table): Added a pointer to BUILTIN_CAT.
(geometry_func): Call real_open_partition with the argument 1
after printing out the drive information.
* stage2/disk_io.c (real_open_partition): Made global.
[!STAGE1_5] (print_completions): In the command completion and
the filename completion, print a newline at the last if
IS_COMPLETION is zero.
* stage2/shared.h (real_open_partition): Declared.
* stage2/fsys_ext2fs.c (ext2fs_dir): Do not print a newline even
if PRINT_POSSIBILITIES is less than zero.
* stage2/fsys_ffs.c (ffs_dir): Likewise.
* stage2/fsys_fat.c (fat_dir): Likewise.
* stage2/fsys_minix.c (minix_dir): Likewise.
1999-09-29 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage1/stage1.S [!FFS_STAGE1_5] (blocklist_default_len): Do
not divide the size by 512, but shift the size to the right by
9 instead, because of a binutils-2.9.1.0.x bug.
* stage1/stage1_lba.S [!FFS_STAGE1_5] (blocklist_default_len):
Likewise.
* stage2/builtins.c (install_func): When installing Stage 1.5,
if set_device returns NULL, then set CURRENT_DRIVE to 0xFF and
CONFIG_FILE to PTR.
1999-09-26 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/char_io.c [!STAGE1_5] (get_cmdline): In cl_insert, call
cl_setcpos before printing BUF, even if LPOS is equal to LLEN.
In the completion, if RET is zero, do not call cl_init.
* stage2/disk_io.c [!STAGE1_5] (print_completions): In the
filename completion, if UNIQUE is 1, check if UNIQUE_STRING is a
directory or not. If so, append '/' to BUF.
In the partition completion, if IS_COMPLETION is non-zero and
*UNIQUE_STRING is not NUL, copy UNIQUE_STRING to PTR. Do not
append '/'.
(real_open_partition) [!STAGE1_5]: If DO_COMPRESSION is non-zero,
call print_a_completion.
(check_BSD_parts) [!STAGE1_5]: Likewise.
[!STAGE1_5] (print_a_completion): Ignore NAME if it is "." or
"..".
1999-09-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* acinclude.m4 (grub_CHECK_USCORE_END_SYMBOL): Do not call
AC_DEFINE within AC_CACHE_VAL. Call it after AC_CACHE_VAL.
* stage2/Makefile.am (STAGE1_5_COMPILE): Do not define
CONFIG_FILE_ASM.
* stage2/asm.S (config_file) [STAGE1_5]: Set the first 4 bytes
to 0xffffffff and the following to "/boot/grub/stage2".
(config_file) [!STAGE1_5]: Set to "/boot/grub/menu.lst".
* stage2/builtins.c (install_func): Read a Stage 2 before
handling the `p' option.
If the `configfile' option is present and FILE is a Stage 2,
translate the device name to the internal device representation
and copy the result to STR.
* stage2/disk_io.c [STAGE1_5] (sane_partition): Eliminated.
[STAGE1_5] (incomplete): Likewise.
[STAGE1_5] (disk_choice): Likewise.
[STAGE1_5] (part_choice): Likewise.
(set_device) [STAGE1_5]: Assume that the first 4 bytes of DEVICE
is a device number. Set DRIVE to the forth byte of DEV and
PARTITION to the first 3 bytes of DEV. If DRIVE is 0xFF, set
CURRENT_DRIVE and CURRENT_PARTITION to SAVED_DRIVE and
SAVED_PARTITION, respectively. Otherwise set to DRIVE and
PARTITION, respectively.
(setup_part) [STAGE1_5]: Always call set_device.
1999-09-24 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* acinclude.m4 (grub_CHECK_END_SYMBOL): Add a missing
double-quote. Reported by Johannes Kroeger
<hanne@squirrel.owl.de>.
1999-09-14 Gordon Matzigkeit <gord@fig.org>
* stage1/stage1.S (blocklist_default_start): New label for default
blocklist start sector.
(blocklist_default_len): New label for default blocklist length.
(blocklist_default_seg): New label for default blocklist segment.
* stage1/stage1_lba.S (blocklist_default_start): Likewise.
(blocklist_default_len): Likewise.
(blocklist_default_seg): Likewise.
1999-09-23 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* acinclude.m4 (grub_ASM_ADDR32): First, create a template
source file "conftest.s.in", and then, replace @ADDR32@ with
"addr32" if GRUB_CV_ASM_PREFIX_REQUIREMENT is yes, otherwise,
replace it with "addr32;". Reported by John Tobey
<spam@john-edwin-tobey.org>.
1999-09-23 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/builtins.c (debug_fs_print_func): Renamed to ...
(disk_read_print_func): ... this.
(fstest_func): Use DISK_READ_HOOK instead of DEBUG_FS.
(install_func): Rename debug_fs_savesect_func to
disk_read_savesect_func.
Rename debug_fs_blocklist_func to disk_read_blocklist_func.
Use DISK_READ_HOOK instead of DEBUG_FS.
(testload_func): Use DISK_READ_HOOK instead of DEBUG_FS.
* stage2/disk_io.c [!STAGE1_5] (debug_fs): Renamed to ...
[!STAGE1_5] (disk_read_hook): ... this.
[!STAGE1_5] (debug_fs_func): Renamed to ...
[!STAGE1_5] (disk_read_func): ... this.
(rawread) [!STAGE1_5]: Use DISK_READ_HOOK and DISK_READ_FUNC
instead of DEBUG_FS and DEBUG_FS_FUNC.
(grub_read) [!STAGE1_5]: Likewise.
(devread) [!STAGE1_5]: Use DISK_READ_HOOK instead of DEBUG_FS.
* stage2/fsys_ext2fs.c (ext2fs_read) [!STAGE1_5]: Use
DISK_READ_HOOK and DISK_READ_FUNC instead of DEBUG_FS and
DEBUG_FS_FUNC.
* stage2/fsys_ffs.c (ffs_read) [!STAGE1_5]: Likewise.
* stage2/fsys_minix.c (minix_read) [!STAGE1_5]: Likewise.
* stage2/shared.h [!STAGE1_5] (debug_fs): Renamed to ...
[!STAGE1_5] (disk_read_hook): ... this.
[!STAGE1_5] (debug_fs_func): Renamed to ...
[!STAGE1_5] (disk_read_func): ... this.
* docs/grub.texi: Likewise, replace debug_fs and debug_fs_func
with disk_read_hook and disk_read_func, respectively.
1999-09-23 Pavel Roskin <pavel_roskin@geocities.com>
* stage2/builtins.c (install_func): New local function,
debug_fs_savesect_func. Use debug_fs_savesect_func to determine
the first sector of Stage2. Write Stage 1 after patching Stage
2.
1999-09-22 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* acinclude.m4 (grub_ASM_USCORE): Do not define HAVE_ASM_USCORE
within AC_CACHE_VAL. Define it after AC_CACHE_VAL if
GRUB_CV_ASM_USCORE is yes.
1999-09-20 Edmund GRIMLEY EVANS <edmundo@rano.demon.co.uk>
* netboot/3c59x.c: INCLUDE_3c59x is replaced by INCLUDE_3C59X
throughout.
* netboot/config.c: Likewise.
* netboot/io.h (__INS): New macro.
(__OUTS): Likewise.
(outl): Likewise.
(inl): Likewise.
(outl_p): Likewise.
(inl_p): Likewise.
Call __INS with the argument `b', with `w' and with `l' to
define insb, insw and insl, respectively. Likewise, Call __OUTS
with `b', with `w' and with `l' to define outsb, outw and outl,
respectively.
* netboot/pci.h (PCI_VENDOR_ID_VORTEX): New macro.
(PCI_DEVICE_ID_VORTEX_3c595): Likewise. Defined as a random
value.
1999-09-20 Edward Killips <ekillips@triton.net>
* stage2/disk_io.c (set_partition_hidden_flag): Set/clear the
hidden flag, whether the hidden flag is set or not.
1999-09-21 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/builtins.c (install_func): Do not set DEBUG_FS at the
first read. Set it to DEBUG_FS_BLOCKLIST_FUNC when reading the
whole of Stage 2. Set FILEPOS to zero at the same time to read
from the beginning of Stage 2. Reported by Pavel Roskin.
1999-09-20 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
The argument ADDR for the command install is now optional.
* stage2/builtins.c (install_func): If parsing ADDR fails, set
INSTALLADDR to zero and set PTR to ADDR.
If INSTALLADDR is zero after parsing the command-line, check if
the Stage 2 id is STAGE2_ID_STAGE2. If so, set INSTALLADDR to
0x8000, otherwise set it to 0x2000.
Set the install address in the Stage 1 after the automatic
determination is completed.
(builtin_install): Say that ADDR is optional in the help
message.
* docs/grub.texi: Synchronize the description about install to
builtins.c. Remove explicit address arguments from all the
examples. Add a description about help.
* docs/menu.lst: Do not specify the address argument for
install.
1999-09-19 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
The completion code is heavily modified.
* stage2/char_io.c [!STAGE1_5] (get_cmdline): In the completion
code, use COMPLETION_BUFFER to get the completion instead of
writing to BUF directly.
Save the position of a possible equal character after a command
in EQUAL_POS and replace the equal character with a space
temporarily for the code simplicity.
At first, just get completions, and, if there is more than one
completions, then print the list of the completions.
* stage2/disk_io.c [!STAGE1_5] (do_completion): New variable.
[!STAGE1_5] (unique): Moved the definition near the beginning.
[!STAGE1_5] (unique_string): Likewise. And changed the type to
char *.
(check_BSD_parts) [!STAGE1_5]: If DO_COMPLETION is non-zero, do
not print anything.
(real_open_partition) [!STAGE1_5]: Likewise.
[!STAGE1_5] (print_fsys_type): Likewise.
[!STAGE1_5] (print_a_completion): The argument FILENAME is
renamed to NAME.
If DO_COMPLETION is non-zero, get the unique part from NAME and
set UNIQUE_STRING to it.
If DO_COMPLETION is zero, just print NAME.
Do not call printf unconditionally.
[!STAGE1_5] (print_completions): Accept two arguements
IS_FILENAME and IS_COMPLETION instead of FILENAME.
Set UNIQUE_STRING to UNIQUE_BUF.
Set DO_COMPLETION to IS_COMPLETION and set it to zero before
returning.
If IS_FILENAME is zero, then complete builtin commands and
return UNIQUE - 1.
Use BUF instead of FILENAME.
If IS_COMPLETION is non-zero, do not print anything.
Copy UNIQUE_STRING to PTR only if IS_COMPLETION and
*UNIQUE_STRING are non-zero.
* stage2/shared.h (COMPLETION_BUF): New macro.
(COMPLETION_BUFLEN): Likewise.
(UNIQUE_BUF): Likewise.
(UNIQUE_BUFLEN): Likewise.
(MENU_BUF): Set to UNIQUE_BUF + UNIQUE_BUFLEN.
(MENU_BUFLEN): Set to 0x8000 + PASSWORD_BUF - UNIQUE_BUF.
(print_completions): Adjusted to the definition.
1999-09-19 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* acinclude.m4 (grub_ASM_PREFIX_REQUIREMENT): Do not call
AC_DEFINE_UNQUOTEs within AC_CACHE_VAL. Define ADDR32 and DATA32
after it.
(grub_CHECK_START_SYMBOL): Do not call AC_DEFINE within
AC_CACHE_VAL. Define HAVE_START_SYMBOL after it.
(grub_CHECK_USCORE_START_SYMBOL): Do not call AC_DEFINE within
AC_CACHE_VAL. Define HAVE_USCORE_START_SYMBOL after it.
(grub_CHECK_END_SYMBOL): Do not call AC_DEFINE within
AC_CACHE_VAL. Define HAVE_END_SYMBOL after it.
(grub_CHECK_USCORE_END_SYMBOL): Do not call AC_DEFINE within
AC_CACHE_VAL. Define HAVE_USCORE_END_SYMBOL after it.
1999-09-17 Pavel Roskin <pavel_roskin@geocities.com>
* acconfig.h (ADDR32): Removed. This entry is automatically
created by autoheader.
(DATA32): Likewise.
* acinclude.m4 (grub_ASM_ADD32): Use ADDR32 instead of addr32.
Require grub_ASM_PREFIX_REQUIREMENT.
(grub_ASM_PREFIX_REQUIREMENT): Define ADDR32 and DATA32.
* configure.in: Call grub_ASM_PREFIX_REQUIREMENT before
grub_ASM_ADDR32. Do not define ADDR32 and DATA32.
* stage1/stage1.S (after_BPB): Use ABS(firstlist) instead of
firstlist.
(MSG): Use ABS(x) instead of x.
(probe_loop): Use the macro MSG for fd_probe_error_string.
* stage1/stage1_lba.S (after_BPB): Use ABS(firstlist) instead of
firstlist.
(MSG): Use ABS(x) instead of x.
* stage2/asm.S (putchar): Renamed to ...
(grub_putchar): ... this.
1999-09-18 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/gunzip.c (reset_linalloc): Use the macro RAW_ADDR
before setting LINALLOC_TOPADDR.
* stage2/shared.h [!GRUB_UTIL] (RAW_ADDR): Added parenthesises
to avoid a gcc warning.
[!GRUB_UTIL] (RAW_SEG): Likewise.
1999-09-18 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* acinclude.m4 (grub_CHECK_START_SYMBOL): New function.
(grub_CHECK_USCORE_START_SYMBOL): Likewise.
(grub_CHECK_END_SYMBOL): Likewise.
(grub_CHECK_USCORE_SYMBOL): Likewise.
* configure.in: Call grub_CHECK_START_SYMBOL and
grub_CHECK_USCORE_START_SYMBOL, and if neither start nor _start
is defined, print an error message and exit.
Likewise, call grub_CHECK_END_SYMBOL and
grub_CHECK_USCORE_END_SYMBOL, and if neither end nor _end is
defined, print an error message and exit.
* acconfig.h (HAVE_START_SYMBOL): Added the "undef" entry.
(HAVE_USCORE_START_SYMBOL): Likewise.
(HAVE_END_SYMBOL): Likewise.
(HAVE_USCORE_END_SYMBOL): Likewise.
* stage2/char_io.c (memcheck): Rename the argument START to
ADDR. Added two missing equal characters.
[GRUB_UTIL]: Define new local functions start_addr and end_addr.
[GRUB_UTIL && HAVE_START_SYMBOL]: The function start_addr
returns START.
[GRUB_UTIL && HAVE_USCORE_START_SYMBOL]: The function start_addr
returns _START.
[GRUB_UTIL && HAVE_END_SYMBOL]: The function end_addr returns
END.
[GRUB_UTIL && HAVE_USCORE_END_SYMBOL]: The function end_addr
returns _END.
[GRUB_UTIL]: If ADDR is equal to or greater than the address
returned by start_addr, and ADDR plus LEN is less than the
address returned by end_addr, return ! ERRNUM.
* stage2/asm.S (get_code_end) [HAVE_END_SYMBOL]: Use $end as the
end of the bss.
[HAVE_USCORE_END_SYMBOL]: Use $_end as the end of the bss.
* stage2/disk_io.c [!STAGE1_5] (cur_part_desc): Made static.
Need not to be global any longer.
1999-09-17 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/char_io.c [!STAGE1_5] (get_cmdline): The argument
COMPLETION is renamed to READLINE.
Do not initialize KILL here.
TAB, C-a, C-e, C-f, C-b, C-u, C-k, C-y, C-p and C-n are handled
only if READLINE is non-zero.
If ECHO_CHAR is not NUL, do not remove the leading spaces in BUF.
Add CMDLINE into the history list only if READLINE is non-zero.
* stage2/stage2.c (cmain): Initialize the kill buffer.
1999-09-17 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
Killing, yanking and manipulating the history are supported.
* stage2/shared.h (cur_cmdline): Removed.
(MAX_CMDLINE): Moved near the beginning of the file.
(NEW_HEAPSIZE): Likewise.
(CMDLINE_BUFLEN): Set to MAX_CMDLINE.
(KILL_BUF): New macro.
(KILL_BUFLEN): Likewise.
(HISTORY_BUF): Likewise.
(HISTORY_SIZE): Likewise.
(HISTORY_BUFLEN): Likewise.
(MENU_BUF): Set to HISTORY_BUF + HISTORY_BUFLEN.
(MENU_BUFLEN): Set to 0x8000 + PASSWORD_BUF - HISTORY_BUF.
(strcpy): New macro.
(grub_strcpy): Delared.
* stage2/boot.c (cur_cmdline): Removed.
* stage2/char_io.c [!STAGE1_5] (grub_strcpy): New function.
[!STAGE1_5] (get_history): Likewise.
[!STAGE1_5] (add_history): Likewise.
[!STAGE1_5] (get_cmdline): Use BUF instead of CMDLINE for the
working buffer for the command-line.
A new function cl_insert is used to insert a string to the
command-line.
In the case where C-u or C-k is pressed, copy the string being
deleted to KILL.
If C-y is pressed, insert KILL to the command-line.
If C-p is pressed, fetch the previous command from the history
list HISTORY, and if C-n is pressed, fetch the next command from
it.
If LPOS is less than LLEN, add CMDLINE into the history list.
If C is equal to KEY_UP, set C to 16, and if C is equal to
KEY_DOWN, set C to 14.
[!STAGE1_5] (num_history): New variable.
1999-09-15 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/size_test: Do not check for the size of Stage 2.
* stage1/Makefile.am (stage2_size.h): Use `set' and `echo'
instead of awk, since we cannot expect awk is present. Remove
stage2_size.h before creating it.
1999-09-15 Pavel Roskin <pavel_roskin@geocities.com>
* Makefile.am (SUBDIRS): Put stage1 after stage2 so that stage2
is built before stage1.
* stage1/Makefile.am (BUILT_SOURCES): New varilable.
(CLEANFILES): Added BUILT_SOURCES.
(stage1_exec_SOURCES): Added stage2_size.h.
(stage1_lba_exec_SOURCES): Likewise.
(stage2_size.h): New rule.
* stage1/stage1.S: Include <stage2_size.h> and use STAGE2_SIZE
to determine how much number of sectors to be read when loading
Stage 2.
* stage1/stage1_lba.S: Likewise.
1999-09-15 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* netboot/config.h: Moved to ...
* netboot/netboot_config.h: ... here.
* netboot/config.c: Include netboot_config.h instead of config.h.
* netboot/fsys_tftp.c: Likewise.
* netboot/ip.c: Likewise.
* netboot/Makefile.am (libdrivers_a_SOURCES): Removed config.h
and added netboot_config.h.
1999-09-14 Pavel Roskin <pavel_roskin@geocities.com>
* grub/asmstub.c [__linux__]: On GLibc 2.0 and newer use lseek,
don't include <linux/fs.h> and define BLKFLSBUF if needed.
1999-09-14 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
Now the grub shell works fine on FreeBSD. A patch by Pavel
Roskin is modified and applied.
* grub/asmstub.c (get_drive_geometry): New function.
(get_diskinfo): Use get_drive_geometry to set the geometry of
DRIVE.
1999-09-14 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* configure.in (--enable-ne): Made the description more clear.
(--enable-nepci): Likewise.
(--enable-wd): Likewise.
(--enable-t503): Likewise.
(--enable-t509): Likewise.
(--enable-3c59x): Likewise.
(--enable-lance): Likewise.
(--enable-cs): Likewise.
(--enable-eepro100): Likewise.
(--enable-wd-default_mem): Renamed to ...
(--enable-wd-default-mem): ... this.
(--enable-cs-scan): Corrected the description.
(NETBOOT_SUPPORT): Defined if NET_CFLAGS is not empty.
* stage2/Makefile.am (stage2_exec_LDADD): Defined only if
NETBOOT_SUPPORT is true.
* netboot/Makefile.am (LIBDRIVERS): New variable. If
NETBOOT_SUPPORT is true, set to libdriver.a, otherwise set to an
empty string.
(noinst_LIBRARIES): Set to LIBDRIVERS.
(DRIVERS): Added 3c509.h, cs89x0.h and ns8390.h.
(libdrivers_a_SOURCES): Added byteorder.h, config.h, if.h, io.h,
ip.h, netboot.h, netdevice.h, nic.h and pic.h.
(libdrivers_a_CFLAGS): Added -fno-builtin and -nostdinc and
removed -O2.
* stage2/char_io.c (grub_sprintf): Added parenthesises to avoid
gcc warnings.
* stage2/gunzip.c (gunzip_test_header): Check if FSYS_TYPE is
TFTP. If so, set IS_TFTP to non-zero, otherwise to zero. And,
use IS_TFTP to check if we have GZIP_CRC instead of the equation
"FILEMAX == 16 * 1024 * 1024".
1999-09-13 Edmund GRIMLEY EVANS <edmundo@rano.demon.co.uk>
The netboot support in the Dresden version of GRUB is integrated.
* Makefile.am (SUBDIRS): Added netboot.
* configure.in (--enable-tftp): New option.
(--enable-ne): Likewise.
(--enable-nepci): Likewise.
(--enable-wd): Likewise.
(--enable-t503): Likewise.
(--enable-t509): Likewise.
(--enable-3c59x): Likewise.
(--enable-lance): Likewise.
(--enable-cs): Likewise.
(--enable-eepro100): Likewise.
(--enable-ne-scan): Likewise.
(--enable-wd-default_mem): Likewise.
(--enable-cs-scan): Likewise.
(NET_CFLAGS): New variable.
(NET_EXTRAFLAGS): Likewise.
Do AC_OUTPUT for netboot/Makefile as well.
* stage1/stage1.S: Set the number of sectors for Stage 2 to 130.
* stage1/stage1_lba.S: Likewise.
* stage2/Makefile.am (stage2_exec_LDADD): Added
../netboot/libdrivers.a.
* stage2/asm.S [!STAGE1_5] (currticks): New function.
* stage2/char_io.c [!STAGE1_5] (grub_sprintf): Likewise.
[!STAGE1_5] (grub_memcmp): Likewise.
* stage2/disk_io.c (fsys_table) [FSYS_TFTP]: Added an entry for
tftp.
(sane_partition) [!STAGE1_5]: If CURRENT_DRIVE is a network
drive, return 1.
(real_open_partition) [!STAGE1_5]: Likewise.
(set_device): If DEVICE contains a network drive, set
CURRENT_DRIVE to 0x20.
* stage2/filesys.h [FSYS_TFTP] (FSYS_TFTP_NUM): Defined as 1.
[!FSYS_TFTP] (FSYS_TFTP_NUM): Defined as 0.
(NUM_FSYS): Added FSYS_TFTP_NUM.
* stage2/gunzip.c (gunzip_test_header): If FILEMAX >= 16MB, do
not try to examine the last 8 bytes of the file. This is
required for compressed files by TFTP.
* stage2/shared.h (sprintf): New macro.
(memcmp): Likewise.
(currticks): Declared.
(grub_sprintf): Likewise.
(grub_memcmp): Likewise.
* stage2/size_test: Set the maximum size of Stage 2 to 66560.
* netboot/3c509.c: New file.
* netboot/3c509.h: Likewise.
* netboot/3c59x.c: Likewise.
* netboot/Makefile.am: Likewise.
* netboot/Makefile.in: Likewise.
* netboot/byteorder.h: Likewise.
* netboot/compile: Likewise.
* netboot/config.c: Likewise.
* netboot/config.h: Likewise.
* netboot/cs89x0.c: Likewise.
* netboot/cs89x0.h: Likewise.
* netboot/eepro100.c: Likewise.
* netboot/fsys_tftp.c: Likewise.
* netboot/if.h: Likewise.
* netboot/io.h: Likewise.
* netboot/ip.c: Likewise.
* netboot/ip.h: Likewise.
* netboot/lance.c: Likewise.
* netboot/netboot.h: Likewise.
* netboot/netdevice.h: Likewise.
* netboot/nic.h: Likewise.
* netboot/ns8390.c: Likewise.
* netboot/ns8390.h: Likewise.
* netboot/pci.c: Likewise.
* netboot/pci.h: Likewise.
1999-09-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* configure.in (--enable-maintainer-mode): Do not use our own
rule, but use AM_MAINTAINER_MODE instead. If the maintainer mode
is enabled, then check for perl, and if it is not found, print
an error message and abort.
* docs/Makefile.am (grub.8): Regenerated if MAINTAINER_MODE is
defined, instead of GRUB_MAINT. Use the variable PERL rather
than running help2man directly.
1999-09-13 Pavel Roskin <pavel_roskin@geocities.com>
* stage2/pc_slice.h (IS_PC_SLICE_TYPE_EXTENDED): New macro.
* stage2/disk_io.c (real_open_partition): Use
IS_PC_SLICE_TYPE_EXTENDED instead of comparing CURRENT_SLICE
with the extended partition types.
1999-09-11 Pavel Roskin <pavel_roskin@geocities.com>
* acconfig.h: New file for autoheader support.
* acinclude.m4 (grub_ASM_EXT_C) Renamed to ...
(grub_ASM_USCORE): ... this. Define HAVE_ASM_USCORE if a C
symbol gets an underscore after compiling to assembler.
* configure.in: Added AM_CONFIG_HEADER. Autoconf 2.13 is now
required. Test for wgetch(), not getch() in -l[n]curses.
* stage2/shared.h (EXT_C): Defined.
Include the best existing header for [n]curses.
1999-09-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/boot.c (load_image): Use CURRENT_DRIVE and
CURRENT_PARTITION instead of SAVED_DRIVE and SAVED_PARTITION for
the boot device in the Multiboot information. Reported by
Stephen Early <steve@greenend.org.uk>.
1999-09-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/disk_io.c (sane_partition) [STAGE1_5]: Defined.
(set_device): Use sane_partition to make sure that CURRENT_DRIVE
has a valid value. Reported by Pavel Roskin.
1999-09-11 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From Pavel Roskin:
* stage2/builtins.c (device_func) [GRUB_UTIL]: Use check_device
in order to make sure that DEVICE exists.
* grub/asmstub.c (check_device): New function.
(grub_stage2): Use check_device to probe a device.
* stage2/builtins.c (geometry_func) [GRUB_UTIL]: Copy the
modified geometry to GEOM and reset BUF_DRIVE. Reported by Pavel
Roskin.
* grub/main.c (no_floppy): New variable.
(probe_second_floppy): Likewise.
(OPT_NO_FLOPPY): New macro.
(OPT_PROBE_SECOND_FLOPPY): Likewise.
(longopts): Added no-floppy and probe-second-floppy.
(usage): Added the descriptions about --no-floppy and
--probe-second-floppy.
(main): Handle OPT_PROBE_SECOND_FLOPPY and OPT_NO_FLOPPY.
* grub/asmstub.c (grub_stage2): Print a message before the probe
routine. If NO_FLOPPY is non-zero, do not probe any floppy drive.
If PROBE_SECOND_FLOPPY is zero, skip the probe of the second
floppy drive.
(get_floppy_disk_name): New function.
(get_ide_disk_name): Likewise.
(get_scsi_disk_name): Likewise.
1999-09-10 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/builtins.c (device_func): New function.
(builtin_device): New variable.
(builtin_table): Added the pointer to BUILTIN_DEVICE.
(builtin_geometry) [GRUB_UTIL]: Accept extra arguments,
CYLINDER, HEAD, SECTOR and TOTAL_SECTOR, and, if they are found,
set the geometry of a drive specified to them.
* grub/asmstub.c (disks): Made global.
(assign_device_name): New function.
1999-09-09 Gordon Matzigkeit <gord@fig.org>
* docs/grub.texi (Commands): Synchronize descriptions with
builtins.c.
* stage2/builtins.c (hide_func): Use set_partition_hidden_flag.
(unhide_func): Likewise.
Many help message cleanups. From Pavel Roskin.
* stage2/shared.h (set_partition_hidden_flag): Declare.
* stage2/disk_io.c (set_partition_hidden_flag): New function
merged from hide_partition and unhide_partition. Make sure we OR
with the inverse of the flag bit rather than XORing to unhide the
partition.
1999-09-10 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/asmstub.c (_FILE_OFFSET_BITS): Defined.
(biosdisk) [!__linux__]: Pass the offset argument as off_t
instead of int to lseek, and compare the return value with
OFFSET. Reported by Pavel Roskin.
(grub_stage2) [!__linux__ && !__GNU__]: Print a warning message.
1999-09-08 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/stage2.c (run_menu): If run_script is successfully
finished, break the loop. Reported by Pavel Roskin.
Do not wait an input character when FALLBACK_ENTRY is less than
zero.
* stage2/cmdline.c (run_script): If ERRNUM is non-zero, wait an
input character, whether FALLBACK is less than zero or not.
1999-09-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/builtins.c (configfile_func): New function.
(builtin_configfile): New variable.
(builtin_table): Added the pointer to BUILTIN_CONFIGFILE.
1999-09-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From Pavel Roskin:
* stage2/asm.S [!STAGE1_5] (chain_stage2): Deleted.
[STAGE1_5] (get_code_end): Likewise.
* stage2/char_io.c (grub_strncat): Likewise.
* stage2/common.c [STAGE1_5] (saved_mem_upper): Likewise.
* stage2/smp-imps.c (imps_release_cpus): Likewise.
(imps_any_new_apics): Made static.
(imps_enabled): Likewise.
(imps_num_cpus): Likewise.
(imps_lapic_addr): Likewise.
(imps_cpu_apic_map): Likewise.
(imps_apic_cpu_map): Likewise.
1999-09-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/builtins.c (testload_func): Fix the typos: 0x2000000 ->
0x200000 and 0x3000000 -> 0x300000.
1999-09-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From Hisazumi Kenji <nel@soraneko.com>:
* stage2/fsys_ffs.c (mapblock_offset): New variable.
(mapblock_bsize): Likewise.
(MAPBUF): New macro.
(MAPBUF_LEN): Likewise.
(ffs_mount): Set MAPBLOCK_OFFSET to -1.
(block_map): Added partial read support.
1999-09-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/cmdline.c (find_command): If COMMAND is less than
(*BUILTIN)->NAME in dictionary order, break the loop.
* stage2/builtins.c (builtin_chainloader): Capitalize the
variable name in the short doc.
(builtin_color): Likewise.
(builtin_geometry): Likewise.
(builtin_help): Likewise.
(builtin_hide): Likewise.
(builtin_initrd): Likewise.
(builtin_install): Likewise.
(builtin_kernel): Likewise.
(builtin_module): Likewise.
(builtin_modulenounzip): Likewise.
(builtin_pause): Likewise.
(builtin_read): Likewise.
(builtin_root): Likewise.
(builtin_testload): Likewise.
(builtin_unhide): Likewise.
(builtin_uppermem): Likewise.
1999-09-05 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
The internal of the command handling is heavily modified, and
a new command "help" is added.
* stage1/stage1.S: Set the number of sectors for Stage 2 to 110.
* stage1/stage1_lba.S: Likewise.
* stage2/builtins.c: New file.
* stage2/Makefile.am (libgrub_a_SOURCES): Added builtins.c.
(stage2_exec_SOURCES): Likewise.
* stage2/boot.c (load_image): Return kernel_t instead int.
(bsd_boot): Change the type of the first argument to kernel_t.
* stage2/char_io.c (get_cmdline): Do not accept the argument
COMMANDS and accept the argument COMPLETION.
Print completions only if COMPLETION is non-zero.
Print the list of short docs when the command is completed.
* stage2/cmdline.c [GRUB_UTIL]: Do not include apic.h and
smp-imps.h.
(fallback): Deleted.
(password): Likewise.
(debug): Likewise.
(normal_color): Likewise.
(highlight_color): Likewise.
(print_cmdline_message): New function.
(commands): Deleted.
(debug_fs_print_func): Likewise.
(installaddr): Likewise.
(installlist): Likewise.
(installsect): Likewise.
(debug_fs_blocklist_func): Likewise.
(find_command): New function.
(init_cmdline): Initialize the data for the command-line
interface. The function to print the message is moved to
print_cmdline_message.
(enter_cmdline): Rewritten from scratch. Now deal with only the
pure command-line and the function to deal with a menu entry is
moved to run_script.
(run_script): New function.
* stage2/shared.h (PASSWORD_BUF): New macro.
(PASSWORD_BUFLEN): Likewise.
(CMDLINE_BUF): Likewise.
(CMDLINE_BUFLEN): Likewise.
(MENU_BUF): Likewise.
(MENU_BUFLEN): Likewise.
(fallback): Deleted.
(fallback_entry): Declared.
(default_entry): Likewise.
(BUILTIN_CMDLINE): New macro.
(BUILTIN_MENU): Likewise.
(BUILTIN_TITLE): Likewise.
(struct builtin): New tag.
(builtin_table): Declared.
(cmdline_t): Deleted.
(kernel_t): New type.
(kernel_type): Declared.
(grub_timeout): Likewise.
(init_builtins): Likewise.
(init_config): Likewise.
(find_command): Likewise.
(print_cmdline_message): Likewise.
(run_script): Likewise.
[!STAGE1_5] (bsd_boot): Deleted.
[!STAGE1_5] (load_image): Likewise.
[!STAGE1_5] (load_module): Likewise.
[!STAGE1_5] (load_initrd): Likewise.
* stage2/size_test: Set the maximum size of Stage 2 to 56320.
* stage2/stage2.c (grub_timeout): Deleted.
(menu_t): Likewise.
(run_menu): Changed the return type to void.
Use FALLBACK_ENTRY instead of FALLBACK.
Do not check the return value of enter_cmdline.
(run_menu) [GRUB_UTIL]: Call stop instead of returning
MENU_ABORT.
(cmain): Set MENU_ENTRIES to MENU_BUF.
Call init_config instead of clearing the variables directly.
Use CMDLINE_BUF for the command-line buffer instead of the
stack.
Adapted the analysis routine for the configuration file to the
new builtin commands interface.
Run enter_cmdline forever.
If run_menu returns, restart the loop.
1999-09-04 Pavel Roskin <pavel_roskin@geocities.com>
* docs/menu.lst: More meaningful examples. Not using (0x80,0)
notation anymore.
* stage2/stage2.c (run_menu): Erase the entered password before
get_cmdline(). Help on TAB disabled when entering the password.
* stage2/char_io.c (get_cmdline): Restore command-line even if
there is no help string.
* configure.in: --disable-gunzip disables decompression in
stage2.
* stage2/gunzip.c [NO_DECOMPRESSION]: Disable all code if
decompression is disabled.
1999-09-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/boot.c (load_image): Use PHDR->P_PADDR instead of
PHDR->P_VADDR. Reported by Ramon van Handel <vhandel@chem.vu.nl>.
1999-09-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* docs/help2man: Upgraded to 1.013.
* docs/grub.8: Regenerated.
1999-09-02 Pavel Roskin <pavel_roskin@geocities.com>
* stage2/cmdline.c (enter_cmdline) [GRUB_UTIL]: Add a space in
the LBA warning message.
1999-09-02 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
The character `=' after a command is now optional.
* stage2/char_io.c (get_cmdline): Search for a space or a equal
character after the first word in CMDLINE when TAB lists
completions, instead of just searching for a eqaul character.
* stage2/cmdline.c (skip_to): Treat the character `=' as a space
if AFTER_EQUAL is non-zero.
(commands): Delete all the equal characters.
* docs/menu.lst: Likewise.
* docs/grub.texi: Likewise.
1999-09-01 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/asmstub.c (env_for_exit): New variable.
(grub_stage2): Do a setjmp in doit, and when it returns
non-zero, set STATUS to 1 if ERRNUM is non-zero.
(stop): Call longjmp instead of exit.
1999-08-31 Pavel Roskin <pavel_roskin@geocities.com>
* stage2/boot.c [GRUB_UTIL] (bsd_boot_entry): New function.
(bsd_boot) [GRUB_UTIL]: Set ENTRY_ADDR to BSD_BOOT_ENTRY to fake
the *BSD boot.
1999-08-31 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/fsys_fat.c (fat_create_blocklist): Cast FAT_BUF to
unsigned short * instead of unsigned long *. Suggested by Pavel
Roskin.
1999-08-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From Edward Killips <ekillips@triton.net>:
* stage2/cmdline.c (commands): Added hide and unhide.
(enter_cmdline): Likewise.
* stage2/disk_io.c (unhide_partition): New function.
(hide_partition): Likewise.
* stage2/pc_slice.h (PC_SLICE_TYPE_HIDDEN_FLAG): New macro.
1999-08-29 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From Pavel Roskin <pavel_roskin@geocities.com>:
* stage2/fsys_minix.c (namelen): New variable.
(MINIX_NAME_LEN): Deleted.
(minix_mount): Set NAMELEN to 14 if SUPRTBLOCK->S_MAGIC is
MINIX_SUPER_MAGIC, and set NAMELEN to 30 if it is
MINIX_SUPER_MAGIC2.
(minix_dir): Use NAMELEN instead of MINIX_NAME_LEN.
1999-08-29 Pavel Roskin <pavel_roslin@geocities.com>
* grub/Makefile.am, stage1/Makefile.am, stage2/Makefile.am:
Avoid using variables inclosed in '@' because they cannot be
overridden at the make time.
1999-08-29 Pavel Roskin <pavel_roskin@geocities.com>
* stage2/fsys_fat.c (fat_create_blocklist): Return 1 for the
root directory on FAT12 and FAT16.
1999-08-27 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/boot.c (load_image): Accept two arguments, KERNEL and
ARG. And use them instead of CUR_CMDLINE.
(load_module): Accept two arguments, MODULE and ARG. And use
them instead of CUR_CMDLINE.
(load_initrd): Accept one argument, INITRD. And use it instead
of CUR_CMDLINE.
(bsd_boot): Accept one additional argument, ARG. And use it
instead of CUR_CMDLINE.
* stage2/cmdline.c (enter_cmdline): Use MB_CMDLINE instead of
HEAP for the Multiboot command-line buffer.
* stage2/shared.h (MB_CMDLINE_BUF): New macro.
(MB_CMDLINE_BUFLEN): Likewise.
1999-08-26 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* docs/Makefile.am [GRUB_MAINT] (grub.8): The argument for the
option --name is changed to "the grub shell".
* docs/grub.8: Regenerated.
* docs/grub.texi: Do not use the name "the Stage 2 emulator" any
more. Use the name "the grub shell" instead.
1999-08-26 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From Klaus Reichl <klaus.reichl@alcatel.at>:
* stage2/fsys_minix.c: New file.
* stage2/size_test: Added a check for the size of minix_stage1_5.
* stage2/Makefile.am (libgrub_a_SOURCES): Added fsys_minix.c.
(libgrub_a_CFLAGS): Added -DFSYS_MINIX=1.
(nodist_pkgdata_DATA): Added minix_stage1_5.
(noinst_PROGRAMS): Added minix_stage1_5.exec.
(stage2_exec_SOURCES): Added fsys_minix.c.
(minix_stage1_5_exec_SOURCES): New variable.
(minix_stage1_5_exec_CFLAGS): Likewise.
(minix_stage1_5_exec_LDFLAGS): Likewise.
* stage2/pc_slice.h (PC_SLICE_TYPE_MINIX): New macro.
* stage2/disk_io.c (fsys_table) [FSYS_MINIX]: Added minix entry.
* stage2/filesys.h [FSYS_MINIX] (FSYS_MINIX_NUM): Set to 1.
[!FSYS_MINIX] (FSYS_MINIX_NUM): Set to 0.
[!NUM_FSYS] (NUM_FSYS): Added FSYS_MINIX_NUM.
* stage2/shared.h (STAGE2_ID_MINIX_STAGE1_5): New macro.
[STAGE1_5 && FSYS_MINIX] (STAGE2_ID): Set to
STAGE2_ID_MINIX_STAGE1_5.
* grub/Makefile.am (AM_CFLAGS): Added -DFSYS_MINIX=1.
* configure.in (--disable-minix): New option.
1999-08-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From Jochen Hoenicke <jochen@gnu.org>:
* stage2/fat.h (FAT_BPB_FAT_SECTORS_16): New macro.
(FAT_BPB_FAT_SECTORS_32): Likewise.
(FAT_BPB_IS_FAT32): Likewise.
(FAT_BPB_ROOT_DIR_CLUSTER): Likewise.
(FAT_BPB_FAT_SECTORS): If FAT_BPB_FAT_SECTORS_16 returns
a non-zero value, return it. Otherwise return
FAT_BPB_FAT_SECTORS_32.
(FAT_DIRENTRY_FIRST_CLUSTER): Corrected.
* stage2/fsys_fat.c (root_dir): New variable.
(fat_mount): Use the macro IS_PC_SLICE_TYPE_FAT instead of
checking for each fs types directly.
Omit the >64 sectors check.
If the current fs type is FAT32, then set FAT_SIZE to 8 and
get the root from BPB.
(fat_create_blocklist): Use the macro SECTOR_SIZE instead of a
magic number.
(fat_dir): Set MAP to ROOT_DIR instead of -1.
* stage2/pc_slice.h (PC_SLICE_TYPE_FAT32): New macro.
(PC_SLICE_TYPE_FAT32_LBA): Likewise.
(PC_SLICE_TYPE_FAT16_LBA): Likewise.
(IS_PC_SLICE_TYPE_FAT): Likewise.
1999-08-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/fsys_ffs.c (ffs_mount): Do not shift the fs type
FS_BSDFFS. Reported by Takehiro Suzuki
<takehiro@coral.ocn.ne.jp>.
* stage2/fsys_fat.c (fat_mount): Do not shift the fs type
FS_MSDOS.
1999-08-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
Pavel Roskin's patch that adds new options to disable arbitrary
filesystems is heavily modified and applied.
* configure.in (--disable-ext2fs): New option.
(--disable-fat): Likewise.
(--disable-ffs): Likewise.
(FSYS_CFLAGS): New variable. Set to filesystems the user choose.
* grub/Makefile.am (AM_CFLAGS): Added -DFSYS_EXT2FS=1,
-DFSYS_FAT=1 and -DFSYS_FFS=1.
* stage2/Makefile.am (libgrub_a_CFLAGS): Likewise.
(stage2_exec_CFLAGS): Added @FSYS_CFLAGS@.
* stage2/filesys.h
[!(FSYS_FFS || FSYS_FAT || FSYS_EXT2FS)] (FSYS_FFS): Deleted.
[!(FSYS_FFS || FSYS_FAT || FSYS_EXT2FS)] (FSYS_FAT): Likewise.
[!(FSYS_FFS || FSYS_FAT || FSYS_EXT2FS)] (FSYS_EXT2FS): Likewise.
* stage2/fsys_ext2fs.c [!FSYS_EXT2FS]: Do not define anything.
* stage2/fsys_fat.c [!FSYS_FAT]: Likewise.
* stage2/fsys_ffs.c [!FSYS_FFS]: Likewise.
1999-08-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage1/stage1_lba.S: Use STAGE1_DRP_ADDR for the address of
drive parameters instead of DRIVE_PARAMETER.
(drive_parameter): Deleted.
* stage1/stage1.h (STAGE1_DRP_ADDR): New macro.
(STAGE1_DRP_SIZE): Likewise.
1999-08-11 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/bios.c (get_diskinfo): In LBA mode, set TOTAL_SECTORS
to the low 32bits of DRP.TOTAL_SECTORS instead of the multiple
of CHS.
* stage2/cmdline.c (enter_cmdline) [GRUB_UTIL]: In the command
"geometry", print the device file name instead of CHS/LBA
information.
* stage2/shared.h (device_map): Declared.
* grub/asmstub.c (device_map): Defined as a global variable
instead of a local variable.
1999-08-10 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
Support the NetBSD and OpenBSD partition slices.
* stage2/pc_slice.h (PC_SLICE_TYPE_BSD): Deleted.
(PC_SLICE_TYPE_FREEBSD): New macro.
(PC_SLICE_TYPE_OPENBSD): Likewise.
(PC_SLICE_TYPE_NETBSD): Likewise.
(IS_PC_SLICE_TYPE_BSD_WITH_FS): Likewise.
(IS_PC_SLICE_TYPE_BSD): Likewise.
* stage2/fsys_ffs.c (ffs_mount): Use the macro
IS_PC_SLICE_TYPE_BSD_WITH_FS instead of checking if
CURRECT_SLICE is equal to the BSD partition type directly.
* stage2/fsys_ext2fs.c (ext2fs_mount): Likewise.
* stage2/fsys_fat.c (fat_mount): Likewise.
* stage2/disk_io.c (check_BSD_parts): Set the low bits of
CURRENT_SLICE to PC_SLICE_TYPE_FREEBSD instead of
PC_SLICE_TYPE_BSD.
(real_open_partition): Use the macro IS_PC_SLICE_TYPE_BSD instead
of checking if CURRENT_SLICE is equal to the BSD partition type
directly.
1999-08-09 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/cmdline.c (commands): Added geometry.
(enter_cmdline): If CUR_HEAP has the string "geometry", print
out the information about a drive that the argument represents.
1999-08-09 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/stage2.c (run_menu): Terminate the string PASSWORD
before checking if ENTERED is identical to PASSWORD. Reported
by Mark Lundeberg <aa026@pgfn.bc.ca>.
1999-08-08 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/stage2.c (set_line_normal): New function.
(set_line_highlight): Likewise.
(run_menu): Do not call the function set_line directly any
longer, call set_line_normal and set_line_highlight instead.
From Pavel Roskin:
* stage2/stage2.c (run_menu) [GRUB_UTIL]: Quit when pushing the
key `q'.
1999-08-05 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* acinclude.m4 (grub_ASM_PREFIX_REQUIREMENT): New function.
* configure.in: Call grub_ASM_PREFIX_REQUIREMENT, and define
ADDR32 and DATA32 based on the result.
* stage2/asm.S: Replace addr32 and data32 prefixes with ADDR32
and DATA32 respectively.
1999-08-05 Pavel Roskin <pavel_roskin@geocities.com>
* stage2/boot.c (load_image): Use RAW_ADDR macro when loading
an a.out kernel.
1999-08-04 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/asm.S: Make each of the addr32 and data32 prefixes
appear in the same line as it modifies, as the gas manual in
binutils-2.9.5.0.4 says "it must be in the same line".
1999-08-04 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* boot.c (load_image): Fix a strcmp test. Reported by Pavel
Roskin <pavel_roskin@geocities.com>.
1999-08-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From "Dan J. Walters" <djw@cs.utexas.edu>:
* stage2/i386-elf.h (EI_BRAND): New macro.
* stage2/boot.c (load_image): If the kernel is ELF, check if it
is a FreeBSD kernel as well as a Multiboot kernel, and if it is
a FreeBSD kernel, then mask ENTRY_ADDR since FreeBSD requires
that. Likewise, mask MEMADDR.
(bsd_boot): Set the bi_symtab and the bi_esymtab members of BI
only if MBI.FLAGS has the flag MB_INFO_AOUT_SYMS. Otherwise,
clear them.
1999-07-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From Pavel Roskin <pavel_roskin@geocities.com>:
* grub/getopt.c: New file. Copied from texinfo-3.12n.
* grub/getopt1.c: Likewise.
* grub/getopt.h: Likewise.
* grub/Makefile.am (grub_SOURCES): Added getopt.c, getopt1.c and
getopt.h.
* configure.in: Check for string.h and strings.h.
* grub/asmstub.c (grub_stage2): Fix a misordering in the output
format of the inline assembly.
1999-07-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From Pavel Roskin <pavel_roskin@geocities.com>:
* stage2/asm.S (get_diskinfo_standard): If the number of sectors
returned is zero, then return an error code, even if non-carrier.
1999-07-15 Gordon Matzigkeit <gord@zen.fig.org>
* docs/Makefile.am (grub.info): Use an ugly hack to downgrade
grub.texi so that it works with Debian's version of texinfo.
1999-07-26 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/bios.c (get_diskinfo): When DRIVE is a floppy drive,
try standard probe routine at first. Reported by Peter Astrand
<altic@lysator.liu.se>.
* grub/main.c (main): Call printf instead of grub_printf.
Reported by Klaus Reichl <a8709182@unet.univie.ac.at>.
1999-07-15 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/cmdline.c (skip_to): Don't increase CMDLINE if the
character to which CMDLINE points is NUL.
* stage2/Makefile.am (EXTRA_DIST): Removed smp-imps.c.
(stage2_exec_SOURCES): Added smp-imps.c.
* stage2/cmdline.c [!GRUB_UTIL] (IMPS_DEBUG) (KERNEL_PRINT)
(CMOS_WRITE_BYTE) (CMOS_READ_BYTE) (PHYS_TO_VIRTUAL)
(VIRTUAL_TO_PHYS) (inb) (outb) (cmos_write_byte)
(cmos_read_byte): These are now defined in ...
* stage2/smp-imps.c (IMPS_DEBUG) (KERNEL_PRINT)
(CMOS_WRITE_BYTE) (CMOS_READ_BYTE) (PHYS_TO_VIRTUAL)
(VIRTUAL_TO_PHYS) (inb) (outb) (cmos_write_byte)
(cmos_read_byte): ... here.
* stage2/cmdline.c [!GRUB_UTIL]: Include apic.h and smp-imps.h.
1999-07-14 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
The function ungetch is simulated so that the user can use a
buggy curses.
* grub/asmstub.c [HAVE_LIBCURSES] (save_char): New variable.
(getkey) [HAVE_LIBCURSES]: If SAVE_CHAR is not ERR, return
SAVE_CHAR and clear it.
(checkkey) [HAVE_LIBCURSES]: If SAVE_CHAR is not ERR, return
SAVE_CHAR. If C is not ERR, set SAVE_CHAR to C.
1999-07-14 Pavel Roskin <pavel_roskin@geocities.com>
* stage2/char_io.c (get_cmdline) [GRUB_UTIL]: Recognize
backspace when ncurses fails to do this.
* grub/asmstub.c (grub_stage2) [HAVE_LIBCURSES]: Call wtimeout
instead of nodelay.
(getkey) [HAVE_LIBCURSES]: Likewise.
1999-07-14 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage1/stage1_lba.S (probe_values): New variable. This is not
used actually, but prevents `install' command from failing
bogusly.
1999-07-14 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
All constants in stage1s are moved to stage1.h and renamed
appropriately, and include stage1.h instead.
* grub/Makefile.am (AM_CFLAGS): Added the include path to stage1.
* stage2/Makefile.am (INCLUDES): New variable.
* stage1/Makefile.am (stage1_exec_SOURCES): Added stage1.h
(stage1_lba_exec_SOURCES): Likewise.
* stage1/stage1.h: New file.
* stage1/stage1.S (SIGNATURE): Renamed to ...
* stage1/stage1.h (STAGE1_SIGNATURE): ... this.
* stage1/stage1.S (BPBEND): Renamed to ...
* stage1/stage1.h (STAGE1_BPBEND): ... this.
* stage1/stage1.S (PARTSTART): Renamed to ...
* stage1/stage1.h (STAGE1_PARTSTART): ... this.
* stage1/stage1.S (MINPARMSIZ): Renamed to ...
* stage1/stage1.h (STAGE1_MINPARMSIZE): ... this.
* stage1/stage1.S (LISTSIZ): Renamed to ...
* stage1/stage1.h (STAGE1_LISTSIZE): ... this.
* stage1/stage1.S (REALSTACK): Renamed to ...
* stage1/stage1.h (STAGE1_STACKSEG): ... this.
* stage1/stage1.S (BUFFERSEG): Renamed to ...
* stage1/stage1.h (STAGE1_BUFFERSEG): ... this.
* stage1/stage1.S (BIOS_HD_FLAG): Renamed to ...
* stage1/stage1.h (STAGE1_BIOS_HD_FLAG): ... this.
* stage1/stage1_lba.S (SIGNATURE): Removed.
* stage1/stage1_lba.S (BPBEND): Likewise.
* stage1/stage1_lba.S (PARTSTART): Likewise.
* stage1/stage1_lba.S (MINPARMSIZ): Likewise.
* stage1/stage1_lba.S (LISTSIZ): Likewise.
* stage1/stage1_lba.S (REALSTACK): Likewise.
* stage1/stage1_lba.S (BUFFERSEG): Likewise.
* stage1/stage1_lba.S (BIOS_HD_FLAG): Likewise.
* stage1/stage1.S (stage1_id): New variable.
* stage1/stage1_lba.S (stage1_id): Likewise.
* stage1/stage1.h (COMPAT_VERSION_MINOR): Set to 2.
(STAGE1_ID_OFFSET): New macro.
(STAGE1_ID_CHS): Likewise.
(STAGE1_ID_LBA): Likewise.
* stage2/cmdline.c (enter_cmdline) [!GRUB_UTIL]: When running
the command `install' and STAGE1_FILE is stage1_lba, check if
LBA is supported.
(enter_cmdline) [GRUB_UTIL]: In the same case above, check only
if CURRENT_DRIVE is a hard disk and, if so, print a warning
message, because /sbin/grub cannot detect if LBA is supported or
not.
* stage1/stage1_lba.S: Fix a bug that incorrectly assigns the
segment of buffer address.
1999-07-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/boot.c (load_image): When removing "vga=...", memmove
the length of VGA_END plus one.
1999-07-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/bios.c (get_diskinfo): In LBA mode, compute
TOTAL_SECTORS from DRP instead of GEOMETRY.
Clear GEOMETRY->FLAGS first.
* stage2/boot.c (load_image): Fix inverted lines.
1999-07-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
Support Linux video mode selection.
* stage2/shared.h (LINUX_VID_MODE_OFFSET): New macro.
(LINUX_VID_MODE_NORMAL): Likewise.
(LINUX_VID_MODE_EXTENDED): Likewise.
(LINUX_VID_MODE_ASK): Likewise.
[!WITHOUT_LIBC_STUBS] (strlen): Likewise.
(grub_strlen): Declared.
* stage2/boot.c (load_image): Added Linux video mode selection.
* stage2/char_io.c [!STAGE1_5] (grub_strlen): New function.
1999-07-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/char_io.c (print_error): Print ERRNUM in the format of
%u instead of %d.
(convert_to_ascii) [STAGE1_5]: Eliminate the `x' and `d'
handling code.
(grub_printf): Declare FORMAT as `const char *'.
(grub_printf) [STAGE1_5]: Eliminate the `x' and `d' handling
code.
(get_based_digit): Removed.
(safe_parse_maxint): Remove unnecessary `register' prefixes,
because GCC does better optimization.
Declare DIGIT as `unsigned int' and calculate the value by more
compact instructions.
[!STAGE1_5] (grub_strncat): Declare S2 as `const char *'.
[!STAGE1_5] (grub_strcmp): Declare S1 and S2 as `const char *'.
[!STAGE1_5] (grub_strstr): Likewise.
(grub_memmove): Declare FROM as `const char *'.
The copy code is replaced with inline assembly code stolen from
Linux-2.2.2.
* stage2/shared.h (grub_printf) : Corrected.
(grub_strncat): Likewise.
(grub_memmove): Likewise.
(grub_strstr): Likewise.
(grub_strcmp): Likewise.
1999-07-11 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage1/stage1.S (sectors): Change the size to long.
(heads): Likewise.
(sector_start): New variable.
(head_start): Likewise.
(cylinder_start): Likewise.
(final_init): Set %si to SECTORS first, and use %si for memory
references.
Zero %eax so that the high 16 bits are always zero.
Set %di to FIRSTLIST - LISTSIZ instead of FIRSTLIST.
(bootloop): Omit the complex CHS recomputation, and always
compute them from LBA address instead.
Call 32bits div instructions instead of 16bits div instructions.
Update the position where to load data from at the end of this
loop, instead of the beginning.
* stage1/stage1_lba.S: New file.
* stage1/Makefile.am (nodist_pkgdata_DATA): Added stage1_lba.
(LDFLAGS): New variable.
(noinst_PROGRAMS): Added stage1_lba.exec.
(stage1_lba_exec_SOURCES): New variable.
(%: %.exec): New rule.
1999-06-28 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/main.c (main): The third argument for strtoul is changed
to 0 in the case where an option is OPT_INSTALL_PARTIION.
Reported by Pavel Roskin <pavel_roskin@geocities.com>.
1999-06-27 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/shared.h (STAGE2_STAGE2_ID): New macro.
(STAGE2_VER_STR_OFFS): Set to 0xd.
(STAGE2_ID_STAGE2): New macro.
(STAGE2_ID_FFS_STAGE1_5): Likewise.
(STAGE2_ID_E2FS_STAGE1_5): Likewise.
(STAGE2_ID_FAT_STAGE1_5): Likewise.
(STAGE2_ID) [!STAGE1_5]: Defined as STAGE2_ID_STAGE2.
(STAGE2_ID) [STAGE1_5] [FSYS_FFS]: Defined as
STAGE2_ID_FFS_STAGE1_5.
(STAGE2_ID) [STAGE1_5] [FSYS_EXT2FS]: Defined as
STAGE2_ID_STAGE1_5.
(STAGE2_ID) [STAGE1_5] [FSYS_FAT]: Defined as
STAGE2_ID_FAT_STAGE1_5.
(COMPAT_VERSION_MINOR): Set to 1.
* stage2/asm.S (stage2_id): New variable.
* stage1/stage1.S: Change the minor version to 1.
1999-06-27 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* configure.in (CFLAGS): Set to "-g", since only this flag is
always sharable.
(STAGE1_CFLAGS): Set to "-O2", and AC_SUBST this.
(GRUB_CFLAGS): Likewise.
(saved_CFLAGS): New variable for temporarily saving CFLAGS.
(STAGE2_CFLAGS): Set to "-Os" if this option is available,
otherwise set to "-fno-strength-reduce -fno-unroll-loops",
and then AC_SUBST this.
* grub/Makefile.am (AM_CFLAGS): Prepended @GRUB_CFLAGS@.
* stage1/Makefile.am (AM_CFLAGS): Prepended @STAGE1_CFLAGS@.
* stage2/Makefile.am (libgrub_a_CFLAGS): Prepened @GRUB_CFLAGS@.
(STAGE2_COMPILE): Prepended @STAGE2_CFLAGS@.
* stage2/asm.S (chain_stage2): Pass CURRENT_PARTITION and
CURRENT_DRIVE, instead of INSTALL_PARTITION and BOOT_DRIVE.
1999-06-27 Pavel Roskin <pavel_roskin@geocities.com>
* configure.in: set CFLAGS to "-Os -g" for compilers which
understand "-Os" if CFLAGS is not already set. Use
"-O2 -fno-strength-reduce -fno-unroll-loops -g" for older gcc
versions.
1999-06-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage2/disk_io.c (attempt_mount) [STAGE1_5]: Set FSYS_TYPE to
0, and set it to NUM_FSYS if mount fails.
(real_open_partition): Call rawread in Stage 1.5 as well.
1999-06-24 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* Makefile.am (SUBDIRS): Change the order of the directories so
that a directory will be made after the dependent directories
are made. `grub' depends on `stage2', and `docs' depends on
`grub'. Do not make in parallel.
* docs/help2man: Copied from help2man-1.012, which contains my
previous change.
* docs/grub.8: Regenerated.
1999-06-24 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
Build process is cleaned up. Stage 2 and Stage 1.5's are all
built in the directory stage2.
From Pavel Roskin <pavel_roskin@geocities.com>:
* Makefile.am (SUBDIRS): e2fs_stage1_5, ffs_stage1_5,
fat_stage1_5 and shared_src are removed.
(DISTCLEANFILES): Deleted.
* configure.in: Call AC_PROG_RANLIB.
(AC_INIT): Change the argument to stage2/stage2.c.
(LIBS): Renamed to ...
(GRUB_LIBS): ... this, and call AC_SUBST for this.
Our own rules are removed.
(AC_OUTPUT): e2fs_stage1_5/Makefile, ffs_stage1_5/Makefile,
fat_stage1_5/Makefile and shared_src/Makefile are removed.
* docs/Makefile.am (HELP2MAN): The prefix $(srcdir) is removed.
[GRUB_MAINT]: Prepend $(srcdir) to $(HELP2MAN).
* e2fs_stage1_5/Makefile.am: Deleted.
* e2fs_stage1_5/Makefile.in: Likewise.
* fat_stage1_5/Makefile.am: Likewise.
* fat_stage1_5/Makefile.in: Likewise.
* ffs_stage1_5/Makefile.am: Likewise.
* ffs_stage1_5/Makefile.in: Likewise.
* grub/Makefile.am (CLEANFILES): Likewise.
(COMPILE): Likewise.
(INCLUDES): Likewise.
(DEP_FILES): Likewise.
(@SHARED_SRC_RULES@): Likewise.
(AM_CFLAGS): New variable.
(grub_LDADD): Set to the library libgrub.a and @GRUB_LIBS@.
* shared_src/Makefile.am: Deleted.
* shared_src/Makefile.in: Likewise.
* shared_src/apic.h: Moved to ...
* stage2/apic.h: ... here.
* shared_src/asm.S: Moved to ...
* stage2/asm.S: ... here.
* shared_src/bios.c: Moved to ...
* stage2/bios.c: ... here.
* shared_src/boot.c: Moved to ...
* stage2/boot.c: ... here.
* shared_src/char_io.c: Moved to ...
* stage2/char_io.c: ... here.
* shared_src/cmdline.c: Moved to ...
* stage2/cmdline.c: ... here.
* shared_src/common.c: Moved to ...
* stage2/common.c: ... here.
* shared_src/defs.h: Moved to ...
* stage2/defs.h: ... here.
* shared_src/dir.h: Moved to ...
* stage2/dir.h: ... here.
* shared_src/disk_inode.h: Moved to ...
* stage2/disk_inode.h: ... here.
* shared_src/disk_inode_ffs.h: Moved to ...
* stage2/disk_inode_ffs.h: ... here.
* shared_src/disk_io.c: Moved to ...
* stage2/disk_io.c: ... here.
* shared_src/fat.h: Moved to ...
* stage2/fat.h: ... here.
* shared_src/filesys.h: Moved to ...
* stage2/filesys.h: ... here.
* shared_src/freebsd.h: Moved to ...
* stage2/freebsd.h: ... here.
* shared_src/fs.h: Moved to ...
* stage2/fs.h: ... here.
* shared_src/fsys_ext2fs.c: Moved to ...
* stage2/fsys_ext2fs.c: ... here.
* shared_src/fsys_fat.c: Moved to ...
* stage2/fsys_fat.c: ... here.
* shared_src/fsys_ffs.c: Moved to ...
* stage2/fsys_ffs.c: ... here.
* shared_src/gunzip.c: Moved to ...
* stage2/gunzip.c: ... here.
* shared_src/i386-elf.h: Moved to ...
* stage2/i386-elf.h: ... here.
* shared_src/imgact_aout.h: Moved to ...
* stage2/imgact_aout.h: ... here.
* shared_src/mb_header.h: Moved to ...
* stage2/mb_header.h: ... here.
* shared_src/mb_info.h: Moved to ...
* stage2/mb_info.h: ... here.
* shared_src/pc_slice.h: Moved to ...
* stage2/pc_slice.h: ... here.
* shared_src/shared.h: Moved to ...
* stage2/shared.h: ... here.
* shared_src/smp-imps.c: Moved to ...
* stage2/smp-imps.c: ... here.
* shared_src/smp-imps.h: Moved to ...
* stage2/smp-imps.h: ... here.
* shared_src/stage1_5.c: Moved to ...
* stage2/stage1_5.c: ... here.
* shared_src/stage2.c: Moved to ...
* stage2/stage2.c: ... here.
* stage1/Makefile.am (pkgdata_DATA): Renamed to ...
(nodist_pkgdata_DATA): ... this.
(COMPILE): Deleted.
(AM_CFLAGS): New variable.
* stage2/Makefile.am: Completely rewritten from scratch.
(TESTS): New variable.
(noinst_SCRIPTS): Likewise.
(noinst_HEADERS): Likewise.
(EXTRA_DIST): Set to smp-imps.c and $(noinst_SCRIPTS).
(noinst_LIBRARIES): New variable.
(libgrub_a_SOURCES): Likewise.
(libgrub_a_CFLAGS): Likewise.
(pkgdata_DATA): Deleted.
(nodist_pkgdata_DATA): New variable.
(MOSTLYCLEANFILES): Set to $(noinst_PROGRAMS).
(COMPILE): Deleted.
(INCLUDES): Likewise.
(stage2_exec_LDADD): Likewise.
(DEP_FILES): Likewise.
(stage2_exec_SOURCES): Set to the actual source files instead of
dummy.
(DISTFILES): Deleted.
(stage2.exec): Likewise.
(stage2): Likewise.
(@SHARED_SRC_RULES@): Likewise.
(noinst_PROGRAMS): Set to executable formats of Stage 2 and
Stage 1.5's.
(STAGE2_LINK): New variable.
(STAGE2_COMPILE): Likewise.
(STAGE1_5_LINK): Likewise.
(STAGE1_5_COMPILE): Likewise.
(stage2_exec_CFLAGS): Likewise.
(stage2_exec_LDFLAGS): Likewise.
(e2fs_stage1_5_exec_SOURCES): Likewise.
(e2fs_stage1_5_exec_CFLAGS): Likewise.
(e2fs_stage1_5_exec_LDFLAGS): Likewise.
(fat_stage1_5_exec_SOURCES): Likewise.
(fat_stage1_5_exec_CFLAGS): Likewise.
(fat_stage1_5_exec_LDFLAGS): Likewise.
(ffs_stage1_5_exec_SOURCES): Likewise.
(ffs_stage1_5_exec_CFLAGS): Likewise.
(ffs_stage1_5_exec_LDFLAGS): Likewise.
(% : %.exec): New rule.
* stage2/size_test: New file, for checking for the sizes of
Stage 2 and Stage 1.5's.
1999-06-24 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* stage1/stage1.S: Call testb instead of andb when checking if
the drive is a floppy.
1999-06-23 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/asmstub.c [__linux__]: Include linux/fs.h for BLKFLSBUF.
(grub_stage2): Call sync before and after calling doit.
(gurb_stage2) [__linux__]: Invalidate buffer caches by BLKFLSBUF
ioctl.
* grub/main.c (main): Call sync first. Suggested by Pavel Roskin
<pavel_roskin@geocities.com>.
* configure.in: Curses libraries are always checked.
(--enable-sbin-grub): Deleted. Now /sbin/grub is always built.
(--enable-maintainer-mode): New option.
* grub/Makefile.am (EXTRA_PROGRAMS): Deleted.
(sbin_PROGRAMS): Just set to grub.
* docs/Makefile.am (man_MANS): New variable.
(HELP2MAN): Likewise.
(noinst_SCRIPTS): Likewise.
(EXTRA_DIST): Add $(man_MANS) and $(noinst_SCRIPTS).
[GRUB_MAINT]: Define the rule for the /sbin/grub manual.
* docs/help2man: Copied from texinfo-3.12i.
(--section): New option to specify which section a manual
belongs to.
(opt_section): New variable.
(section): Likewise.
* docs/grub.8: Produced by help2man automatically.
1999-06-22 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* shared_src/char_io.c (get_cmdline): Add two missing `break's.
* shared_src/cmdline.c (commands): Add quit.
(enter_cmdline): Change the return type to cmdline_t, and return
CMDLINE_OK if successful, otherwise CMDLINE_ERROR if fail.
(enter_cmdline) [GRUB_UTIL]: Return CMDLINE_ABORT if CUR_HEAP
contains "quit".
[!GRUB_UTIL]: Just print an annotation message.
* shared_src/shared.h (cmdline_t): New enum type.
(enter_cmdline): Change the return type to cmdline_t.
(cmain): Remove ``noreturn'' attribute.
* shared_src/stage2.c (menu_t): New enum type.
(run_menu): Change the return type to menu_t.
If enter_cmdline returns CMDLINE_ABORT, then return MENU_ABORT,
otherwise return MENU_OK.
(cmain): If enter_cmdline aborts, then break the command-line
loop and return. If run_menu aborts, then return.
1999-06-22 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* shared_src/Makefile.am (EXTRA_DIST): Add bios.c. Reported by
Pavel Roskin <pavel_roskin@geocities.com>.
1999-06-21 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* docs/Makefile.am (html): Deleted.
(txt): Likewise.
(EXTRA_DIST): $(txt) and $(html) are removed.
* docs/boot-proposal.html: Removed.
* docs/errors.html: Likewise.
* docs/faq.html: Likewise.
* docs/grub.html: Likewise.
* docs/install.html: Likewise.
* docs/mem64mb.html: Likewise.
* docs/technical.html: Likewise.
* docs/using.html: Likewise.
* docs/PC_partitioning.txt: Likewise.
* docs/bios_mapping.txt: Likewise.
* docs/commands.txt: Likewise.
* docs/embedded_data.txt: Likewise.
* docs/filesystem.txt: Likewise.
1999-06-21 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
From Alexander K. Hudek <alexhudek@home.com>:
* shared_src/disk_io.c (real_open_partition): Check if
CURRENT_SLICE is equal to PC_SLICE_TYPE_WIN95_EXTENDED as well.
* shared_src/pc_slice.c (PC_SLICE_TYPE_WIN95_EXTENDED): New
macro.
* shared_src/bios.c (biosdisk): Clear the reserved member of DAP.
1999-06-08 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
Color-menu support based on Peter Astrand
<altic@lysator.liu.se>'s patch.
* shared_src/asm.S (nocursor): New function.
* shared_src/cmdline.c (normal_color): New variable.
(highlight_color): Likewise.
(commands): Added "color" command.
(enter_cmdline): Handle the color command.
* shared_src/shared.h (normal_color): Declared.
(highlight_color): Likewise.
[!GRUB_UTIL] (nocursor): Likewise.
* shared_src/stage2.c (print_border) [!GRUB_UTIL]: Color the
menu.
(run_menu) [!GRUB_UTIL]: Call nocursor, and call set_line with
the second argument HIGHLIGHT_COLOR when highlighting a line,
and NORMAL_COLOR when drawing a normal line.
(cmain): Initialize normal_color and highlight_color. Handle
the color command in the same way as the command-line
interface.
1999-06-07 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* e2fs_stage1_5/Makefile.am (IMPORTANT_SIZE_LIMIT): Set to 31744.
* fat_stage1_5/Makefile.am (IMPORTANT_SIZE_LIMIT): Likewise.
1999-06-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
The debug version of Stage 2 is removed.
* shared_src/cmdline.c: The imps code is now defined if GRUB_UTIL
is not defined, but not if DEBUG.
(debug): New global variable.
(commands): All commands are always enabled, and added "debug".
(debug_fs_print_func): Defined unconditionally.
(debug_fs_blocklist_func): If DEBUG is true, then call printf.
(enter_cmdline): Handle "testload", "read", "fstest",
"impsprobe" and "displaymem" unconditionally, and added "debug"
handling.
[GRUB_UTIL]: If a command is impsprobe, just fails.
* shared_src/disk_io.c (devread) [!STAGE1_5]: If DEBUG_FS and
DEBUG are true, then call printf.
* shared_src/asm.S (patch_code): Defined unconditionally.
(patch_code_end): Likewise.
* stage1/stage1.S (firstlist) [!FFS_STAGE1_5]: Increase the
number of sectors to 90, because Stage 2 is larger than 80
sectors.
* configure.in: The option --enable-debug is removed, and do
not output "stage2_debug/Makefile".
* Makefile.am (SUBDIRS): stage2_debug is removed.
* stage2_debug/Makefile.am: Deleted.
* stage2_debug/Makefile.in: Likewise.
1999-06-02 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/main.c (verbose): New variable.
(read_only): Likewise.
(OPT_VERBOSE): New macro.
(OPT_READ_ONLY): Likewise.
(longopts): Add --read-only and --verbose options.
(usage): Add the descriptions about --read-only and --verbose.
(main): Handle OPT_VERBOSE and OPT_READ_ONLY.
If HOLD and VERBOSE are non-zero, then display the message
about how to restart /sbin/grub.
* shared_src/shared.h (verbose) [GRUB_UTIL]: Declared.
(read_only) [GRUB_UTIL]: Likewise.
* grub/asmstub.c (hex_dump): New function.
(biosdisk): In the case where SUBFUNC is
BIOSDISK_WRITE, check for READ_ONLY and call nwrite if
READ_ONLY is zero. If VERBOSE is non-zero, display what GRUB
will try to do.
(get_diskinfo): Open DEVNAME with the mode O_RDWR if READ_ONLY
is zero, and attempt to open DEVNAME with the mode O_RDONLY
regardless of ERRNO if READ_ONLY is non-zero. If VERBOSE is
non-zero, then display the drive DRIVE and the file DEVNAME.
* shared_src/disk_io.c (set_device) [STAGE1_5]: Eliminate
completion code.
1999-06-01 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/asmstub.c: Do not use I_AM_VERY_BRAVE any more.
(grub_stage2): Delete first_scsi_disk and add a variable
num_hd, which is used for counting how many drives are
detected.
Initialize the flags member of each element of disks to -1
instead of 0, and check if it is equal to -1 instead of 0 when
close it.
(get_diskinfo): Treat -1 as non-caching state instead of 0.
1999-06-01 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
Reported from Klaus Reichl <a8709182@unet.univie.ac.at>:
* docs/.cvsignore: New file.
* shared_src/disk_io.c (print_a_completion): New function
which saves what has been printed to UNIQUE_STRING and printf
it.
(unique) [!STAGE1_5]: New variable.
(unique_string): Likewise.
(print_completions): Use print_a_completion, and improve the
completion facility.
* shared_src/fsys_ext2fs.c (ext2fs_dir) [!STAGE1_5]: Use
print_a_completion instead of just printf.
* shared_src/fsys_ffs.c (ffs_dir) [!STAGE1_5]: Likewise.
* shared_src/fsys_fat.c (fat_dir) [!STAGE1_5]: Likewise.
* shared_src/shared.h (print_a_completion): Declared.
* shared_src/cmdline.c (enter_cmdline): Explicitly cast
int to pointer to char for grub_read.
* grub/asmstub.c (grub_stage2) [__linux__]: Don't use /dev/fd1.
Probe 4 IDE drives instead of 2.
(biosdisk) [__linux__]: Add a prototype for _llseek.
* shared_src/char_io.c (get_cmdline): Update LPOS and LLEN_OLD
when the functon print_completion modifies CMDLINE.
* shared_src/stage2.c (get_line_from_config): Fix LITERAL
handling.
1999-05-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/asmstub.c (grub_stage2): Fix a memory leak that FP is
not closed.
1999-05-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/main.c: Replace OPT_DISABLE_CONFIG_FILE and
OPT_DISABLE_CURSES with OPT_NO_CONFIG_FILE and OPT_NO_CURSES
respectively.
(longopts): Rename from "disable-config-file" to
"no-config-file", and from "disable-curses" to "no-curses".
(usage): Use "grub" instead of ARGV[0], read the standards.
Change the help message according to the changes above.
(main): Handle OPT_NO_CONFIG_FILE and OPT_NO_CURSES, instead
of OPT_DISABLE_CONFIG_FILE and OPT_DISABLE_CURSES.
1999-05-21 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* docs/TODO: Moved to ...
* TODO: ... here.
* docs/BUGS: Moved to ...
* BUGS: ... here.
* docs/COPYING: Removed.
* docs/Makefile.am (EXTRA_DIST): Get rid of BUGS.
* Makefile.am (EXTRA_DIST): Set to BUGS.
1999-05-17 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* acinclude.m4 (grub_ASM_EXT_C): Do not overrun the command
shift. Reported by Pavel Roskin <pabel_roskin@geocities.com>.
1999-05-14 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* docs/Makefile.am (info_TEXINFOS): Added multiboot.texi.
* docs/multiboot.texi: New file. From Kunihiro Ishiguro.
1999-05-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/asmstub.c: Include <errno.h>. Reported by Kunihiro
Ishiguro <kunihiro@zebra.org>.
1999-05-11 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
Reported by Brian Brunswick <brian@skarpsey.demon.co.uk>:
* shared_src/asm.S (start) [STAGE1_5]: Jump to 0x0:0x2000.
* shared_src/cmdline.c (enter_cmdline): Doesn't check for the jump
address in stage2. We are not paranoid.
Add a missing RAW_ADDR macro.
* shared_src/diskio.c (grub_open): Call setup_part even in stage1.5.
And, include necessary functions that were eliminated incorrectly.
* shared_src/char_io.c [STAGE1_5]: Eliminate unnecessary functions
for stage1.5.
* grub/asmstub.c (nread): New function. Handle EINTR.
(nwrite): Likewise.
(biosdisk) [I_AM_VERY_BRAVE]: When SUBFUNC is BIOSDISK_WRITE, call
nwrite.
Reported by Pavel Roskin <pavel_roskin@geocities.com>:
* shared_src/fsys_ext2fs.c (off_t): Renamed to ...
(linux_off_t): ... this.
* shared_src/defs.h (off_t): Renamed to ...
(mach_off_t): ... this.
* shared_src/fs.h (BBOFF): Use mach_off_t instead of off_t.
(SBOFF): Likewise.
* e2fs_stage1_5/Makefile.am (IMPORTANT_SIZE_LIMIT): Set to 81920.
* fat_stage1_5/Makefile.am (IMPORTANT_SIZE_LIMIT): Likewise.
* ffs_stage1_5/Makefile.am (IMPORTANT_SIZE_LIMIT): Set to 7168.
1999-05-03 Gordon Matzigkeit <gord@trick.fig.org>
From Pavel Roskin:
* shared_src/shared.h: Redeclare.
* grub/main.c (main): Use strncpy rather than pointer assignment
to set the config file name.
* grub/asmstub.c: Make config_file a static array, not a pointer.
Correct the value of VERSION_STRING.
1999-04-10 Gordon Matzigkeit <gord@trick.fig.org>
* debian/rules (build): Install into /lib instead of /share.
1999-05-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
Preliminary non-interactive use support.
* grub/main.c (use_config_file): New variable.
(use_curses): Likewise.
(OPT_DISABLE_CONFIG_FILE): New constant.
(OPT_DISABLE_CURSES): Likewise.
(OPT_BATCH): Likewise.
(longopts): Add new options, --disable-config-file, --disable-curses,
and --batch.
(usage): Print the help messages about these new options.
(main): Handle them.
* grub/asmstub.c (grub_stage2) [HAVE_LIBCURSES]: If ! USE_CURSES,
fallback non-curses code.
(stop) [HAVE_LIBCURSES]: Likewise.
(cls) [HAVE_LIBCURSES]: Likewise.
(getxy) [HAVE_LIBCURSES]: Likewise.
(gotoxy) [HAVE_LIBCURSES]: Likewise.
(grub_putchar) [HAVE_LIBCURSES]: Likewise.
(getkey) [HAVE_LIBCURSES]: Likewise.
(checkkey) [HAVE_LIBCURSES]: Likewise.
(set_attrib) [HAVE_LIBCURSES]: Likewise.
* shared_src/cmdline.c (enter_cmdline): Do not use getc, but use
getkey.
* shared_src/stage2.c (cmain) [GRUB_UTIL]: Check if USE_CONFIG_FILE
is non-zero or not.
* shared_src/shared.h (getc): Removed.
(use_config_file) [GRUB_UTIL]: Add the declaration.
(use_curses) [GRUB_UTIL]: Likewise.
1999-05-02 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* shared_src/asm.S (biosdisk_standard): Pop %ebp correctly, reported
by Pavel Roskin <pavel_roskin@geocities.com>.
1999-04-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* docs/menu.lst: Rewritten, so that it contains up-to-date
information and FAQish configuration examples.
1999-04-09 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* shared_src/asm.S (get_diskinfo_floppy): Correct the number of heads
and the one of cylinders.
1999-04-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/asmstub.c (get_diskinfo): Compute the total number of sectors
for DRIVE.
* shared_src/asm.S (get_diskinfo_standard): Clear the data segment
after calling int 0x13. Restore the base pointer after returning
to protected mode.
(get_diskinfo_floppy): Likewise.
* shared_src/bios.c (get_diskinfo): Always set the size of DRP to
the max size of DRP, regardless of the major version of extensions.
1999-04-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* shared_src/shared.h (struct geometry): Declare total_sectors as
unsigned long instead of unsigned long long, because GRUB represents
a sector number by 4bytes integer, so it doesn't make sense.
* shared_src/bios.c (biosdisk) [!NO_INT13_FALLBACK]: Recompute
TOTAL_SECTORS according to CHS information.
(get_diskinfo) [DEBUG]: Print the geometry of DRIVE.
* shared_src/disk_io.c (real_open_partition): Set PART_LENGTH to
BUF_GEOM.TOTAL_SECTORS.
1999-04-01 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* docs/texinfo.tex: Copied from automake-1.4a.
* configure.in (SHARED_SRC_RULES): Add bios into shared sources.
* e2fs_stage1_5/Makefile.am (e2fs_stage1_5_exec_LDADD): Added bios.o.
* fat_stage1_5/Makefile.am (fat_stage1_5_exec_LDADD): Likewise.
* ffs_stage1_5/Makefile.am (ffs_stage1_5_exec_LDADD): Likewise.
* stage2/Makefile.am (stage2_exec_LDADD): Likewise.
* stage2_debug/Makefile.am (stage2_debug_exec_LDADD): Likewise.
* shared_src/Makefile.am (EXTRA_DIST): Added bios.c.
* shared_src/asm.S (biosdisk): Deleted. Now defined in bios.c.
(get_diskinfo): Likewise.
(biosdisk_int13_extensions): New function.
(biosdisk_standard): Likewise.
(check_int13_extensions): Likewise.
(get_diskinfo_int13_extensions): Likewise.
(get_diskinfo_standard): Likewise.
(get_diskinfo_floppy): Likewise.
* shared_src/bios.c: New file.
* shared_src/shared.h (struct geometry): Added new member,
total_sectors.
1999-03-28 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* shared_src/stage2.c (print_entries): Correctly assign MENU_ENTRIES
the entries starting from FIRST.
1999-03-27 Gordon Matzigkeit <gord@trick.fig.org>
* Change everything to use memset and memmove instead of bzero and
bcopy. GNB's Not BSD.
* shared_src/shared.h (grub_memset): Adapted from grub_bzero.
(grub_memmove): Adapted from grub_bcopy.
* grub/asmstub.c (checkkey): Fix unterminated comment.
* shared_src/char_io.c (grub_printf): Renamed from printf.
(grub_tolower): Renamed from tolower.
(grub_isspace): Renamed from isspace.
(grub_strncat): Renamed from strncat.
(grub_strstr): Renamed from strstr.
(grub_bcopy): Renamed from bcopy.
(grub_bzero): Renamed from bzero.
From Bradford Hovinen:
* shared_src/char_io.c (get_cmdline): Add new argument to hide
password entry.
(grub_strcmp): New function.
* shared_src/shared.h (get_cmdline): Fix declaration.
(grub_strcmp): Declare.
* shared_src/stage2.c (run_menu): Use get_cmdline with an
ECHO_CHAR of `*'. This protects against both brute-force and
sidelong-glance password cracking attempts.
* grub/main.c (usage): Display defaults for stage2 options.
* grub/asmstub.c [WITHOUT_LIBC_STUBS]: Renamed from
NO_REMAPPING_LIBC_FUNCTIONS.
* grub/main.c: Likewise.
* shared_src/shared.h: Likewise.
1999-03-27 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/asmstub.c (set_attrib): Use inch and addch, instead of
chgat, because chgat doesn't work as expected.
1999-03-26 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* grub/asmstub.c (grub_stage2) [HAVE_LIBCURSES]: Call nodelay.
(checkkey) [HAVE_LIBCURSES]: If getting an input character, then
ungetch it, because checkkey shouldn't modify the input queue.
Use file descriptors instead of file pointers to support
>4GB disks in Linux.
* grub/asmstub.c (grub_stage2): Call close instead of fclose.
(get_diskinfo): Call open instead of fopen.
(biosdisk) [__linux__]: Use _llseek instead of lseek.
(biosdisk): Call read instead of fread.
Add options so that the user can specify the config file.
* grub/Makefile.am (CPPFLAGS): Use -fwritable-strings, because
grub assumes that all strings resides at the data section.
* grub/main.c: Define NO_REMAPPING_LIBC_FUNCTIONS before including
shared.h.
(OPT_CONFIG_FILE): New macro.
(OPT_INSTALL_PARTITION): Likewise.
(OPT_BOOT_DRIVE): Likewise.
(longopts): Add new options, config-file, install-partition and
boot-drive.
(usage): Add the documentation for them.
(main): Add handling code for OPT_CONFIG_FILE, OPT_INSTALL_PARTITION
and OPT_BOOT_DRIVE.
* grub/asmstub.c: Define NO_REMAPPING_LIBC_FUNCTIONS before including
shared.h.
(config_file): Make it char * instead of char [].
(getrtsecs): Return current time instead of 0xff.
* shared_src/shared.h [NO_REMAPPING_LIBC_FUNCTIONS]: Don't define
libc-API-compatible function names.
(config_file): Change the prototype from char [] to char *.
(grub_putchar): Renamed from putchar.
1999-03-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* char_io.c (get_cmdline): Call cl_setcpos even if lpos == llen,
because ncurses won't update the cursor position.
* grub/main.c (OPT_HOLD): New macro.
(longopts): New option --hold.
(usage): Add the documentation about --hold.
(main): Set hold if --hold is specified. Wait until cleared.
1999-03-22 Gordon Matzigkeit <gord@trick.fig.org>
* shared_src/cmdline.c (enter_cmdline): Check the return value of
set_device in the `root' command.
* shared_src/char_io.c (memcheck): Special-case cur_part_desc and
reenable memory checking.
1999-03-21 Gordon Matzigkeit <gord@trick.fig.org>
* shared_src/boot.c (load_image): Make sure we use the mapped
address before actually writing data to memaddr.
* shared_src/char_io.c (get_cmdline): Only zero-terminate if there
were leading blanks. This prevents accidental truncation of
commands.
* grub/asmstub.c (get_diskinfo): Cache device geometries as well
as file handles.
Use the Linux HDIO_GETGEO ioctl to make a better guess at hard
disk geometries.
1999-03-16 Gordon Matzigkeit <gord@trick.fig.org>
* shared_src/shared.h (geometry_t): Delete typedef, until we
actually use it.
1999-03-16 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* shared_src/asm.S (biosdisk): Use a structure for geometry
instead of a integer.
(get_diskinfo): Take a pointer to a geometry structure as the
second argument, and fill a geometry in it. Return 1 if an error
occurs, otherwise return 0.
* shared_src/boot.c (bsd_boot): Compute BIOS geometries for BSD.
* shared_src/cmdline.c (enter_cmdline): Declare dest_geom as
struct geometry.
* shared_src/disk_io.c (buf_geom): Declare as struct geometry.
* shared_src/filesys.h (SECTORS): Deleted.
(HEADS): Likewise.
(CYLINDERS): Likewise.
* shared_src/shared.h (BIOSDISK_FLAG_LBA_EXTENSION): New macro.
(struct geometry): New structure.
(buf_geom): Correct the prototype.
(get_diskinfo): Likewise.
(biosdisk): Likewise.
1999-03-15 Gordon Matzigkeit <gord@trick.fig.org>
* grub/asmstub.c (doit): Nested function to get a clean stack
frame while in grub_stage2.
Use different assembler magic. From OKUJI Yoshinori.
1999-03-14 Gordon Matzigkeit <gord@trick.fig.org>
* shared_src/stage2.c (run_menu): Use A_REVERSE and A_NORMAL
constants instead of magic numbers.
* shared_src/shared.h (A_REVERSE): Renamed from ATTR_INVERSE for
compatibility with curses.
(A_NORMAL): Renamed from ATTR_NORMAL.
* shared_src/cmdline.c (enter_cmdline): Change prompt to "grub> ".
(enter_cmdline): Only abort the boot if we are in a script.
* shared_src/stage2.c (run_menu): Change prompts to "grub edit> ".
* shared_src/char_io.c (memcheck): Use RAW_ADDR to compute memory
locations.
(get_cmdline): Change the `goto next line' code to account for
newlines deleting to end of line under curses.
* Innumerable cleanups to fix warnings. There are still too many
typecasts in the wrong places (int variables used to hold
pointers, then casted to a pointer type), but things look better.
* configure.in (CPPFLAGS): Bump up GCC warnings to -Wall
-Wmissing-prototypes -Wunused.
* shared_src/shared.h: Delete stupid declarations, and totally
rearrange for clarity.
(inb, outb): Move to cmdline.c, since it's only used there.
(print_possibilities, fsmax, fsys_table): Move definitions to
disk_io.c.
* grub/asmstub.c: Fill in more stubs.
1999-03-13 Gordon Matzigkeit <gord@trick.fig.org>
* shared_src/gunzip.c (border): Rename to bitorder, to resolve
clash with curses.
* shared_src/stage2.c (timeout): Rename to grub_timeout.
* configure.in: Check for curses libraries for use with
/sbin/grub.
* shared_src/shared.h (KEY_DELETE): Rename to KEY_DC, for
compatibility with curses.
(KEY_INSERT): Rename to KEY_IC.
(KEY_PGDN): Rename to KEY_NPAGE.
(KEY_PGUP): Rename to KEY_PPAGE.
* shared_src/asm.S (asm_getkey): Renamed to getkey.
* shared_src/char_io.c (getkey): Delete, because it's useless.
* shared_src/shared.h: Resolve name clashes with libc by renaming
overlapping functions to have grub_ prefixes, then defining
macros.
* grub/asmstub.c (start_stage2): Make some assertions about our
scratch memory area.
* shared_src/shared.h (end): Delete declaration.
(RAW_ADDR, RAW_SEG): Macros to redirect /sbin/grub memory requests
through grub_scratch_mem.
* grub/asmstub.c (get_mem_map): Implement, simulating 4MB
contiguous memory.
(get_code_end): Implement, simulating with a malloced area.
grub/asmstub.c (start_stage2): Initialize grub_scratch_mem.
* shared_src/asm.S (get_mem_map): Some BIOSes expect the high word
of %eax to be zero.
(get_code_end): Move this from common.c so that we can stub it out
in the simulator.
* debian/rules: Make sure info files end up in /usr/info, not
/info.
1999-03-10 Gordon Matzigkeit <gord@trick.fig.org>
* shared_src/asm.S (biosdisk): Make LBA mode work correctly. From
OKUJI Yoshinori.
Unconditionally define NO_INT13_FALLBACK until we release GRUB
0.6. This will help debug any problems with the LBA support until
then.
1999-03-09 Gordon Matzigkeit <gord@trick.fig.org>
* shared_src/asm.S (biosdisk): Compute location of
disk_address_packet correctly. From OKUJI Yoshinori.
1999-03-08 Gordon Matzigkeit <gord@trick.fig.org>
* docs/grub.texi: New Texinfo documentation.
* shared_src/disk_io.c (set_device): First stab at interpreting
Mach-style partition naming.
* shared_src/stage2.c (run_menu): Don't say it was a failure if
enter_cmdline returns nonzero... just wait for a key.
* shared_src/cmdline.c (enter_cmdline): Return nonzero, and avoid
the fallback command if we did an install.
* shared_src/asm.S (_start): New explicit symbol to supress
warnings.
* e2fs_stage1_5/Makefile.am (NO_FANCY_STUFF): Renamed to STAGE1_5,
since that describes this conditional more accurately.
* fat_stage1_5/Makefile.am: Likewise.
* ffs_stage1_5/Makefile.am: Likewise.
* shared_src/asm.S: Likewise.
* shared_src/char_io.c: Likewise.
* shared_src/common.c: Likewise.
* shared_src/disk_io.c: Likewise.
* shared_src/fsys_ext2fs.c: Likewise.
* shared_src/fsys_ffs.c: Likewise.
* shared_src/shared.h: Likewise.
1999-03-07 Gordon Matzigkeit <gord@trick.fig.org>
* configure.in (SHARED_SRC_RULES): Automatically generate
Makefile dependencies for files in shared_src.
e2fs_stage1_5/Makefile.am: Use them.
fat_stage1_5/Makefile.am: Likewise.
ffs_stage1_5/Makefile.am: Likewise.
grub/Makefile.am: Likewise.
stage2/Makefile.am: Likewise.
stage2_debug/Makefile.am: Likewise.
* shared_src/disk_inode.h: Fix typo: i_ic shouldn't be defined.
* shared_src/fsys_ffs.c (block_map): Make static, since this
function isn't used outside of its defining file.
* shared_src/disk_io.c [NO_FANCY_STUFF]: Eliminate a whole bunch
more functions from the stage1.5. From OKUJI Yoshinori.
* shared_src/fsys_ffs.c: Likewise.
* shared_src/char_io.c: Likewise.
1999-03-05 Gordon Matzigkeit <gord@trick.fig.org>
* shared_src/char_io.c (getkey): Don't set BUF_DRIVE to -1.
BUF_DRIVE has nothing at all to do with getkey.
* shared_src/common.c (err_list): Change description of ERR_GEOM
to be more informative.
* Makefile.am (configure): Depend on debian/changelog.
* configure.in (host_cpu): Make all fully i386-compatible CPUs be
identified as i386.
(AM_INIT_AUTOMAKE): Fetch values for PACKAGE and VERSION from
debian/changelog, so that we only have one file to update.
* shared_src/asm.S (get_diskinfo): Fix a few bit-twiddling bugs in
the BIOS extension detection code.
(biosdisk) [AWARD_INT13_EXTENSIONS]: Preliminary implementation
of Award's encoding of cylinder bits 10 and 11.
(biosdisk) [NO_INT13_FALLBACK]: If defined, don't use the standard
disk interface if the extended interface fails.
* configure.in: Make sure $(host_cpu) and $(host_vendor) are
substituted into the Makefile.
* e2fs_stage1_5/Makefile.am (pkgdatadir): Install files in
$(datadir)/grub/$(host_cpu)-$(host_vendor).
* fat_stage1_5/Makefile.am: Likewise.
* ffs_stage1_5/Makefile.am: Likewise.
* stage1/Makefile.am: Likewise.
* stage2/Makefile.am: Likewise.
* stage2_debug/Makefile.am: Likewise.
1999-03-03 Gordon Matzigkeit <gord@trick.fig.org>
* shared_src/asm.S (biosdisk): Use LBA mode if high nibble of
GEOMETRY is nonzero.
(get_diskinfo): Set high nibble of GEOMETRY (0xf0000000) to 1 if
LBA mode is detected.
1999-03-02 Gordon Matzigkeit <gord@trick.fig.org>
* shared_src/disk_io.c (make_saved_active): Use BIOSDISK_READ and
BIOSDISK_WRITE.
* shared_src/cmdline.c (enter_cmdline): Use BIOSDISK_WRITE.
* shared_src/shared.h (BIOSDISK_SUBFUNC_READ,
BIOSDISK_SUBFUNC_WRITE): Delete constants.
* shared_src/asm.S (biosdisk): Change subfunc argument to be
read=0, write=1.
* configure.in: Drop redundant AC_PROG_INSTALL. From OKUJI
Yoshinori.
1999-03-01 Gordon Matzigkeit <gord@trick.fig.org>
* debian/rules (binary-arch): Properly install README.debian.
* acinclude.m4 (grub_OBJCOPY_ABSOLUTE): Don't forget to move the
old binary out of the way before reentering the loop.
(grub_ASM_ADDR32): Delete conftest files after running the test.
* debian/rules (binary-arch): Remove empty /sbin directory until
/sbin/grub is installed. Use $(DESTDIR) instead of $(prefix) to
install files.
* shared_src/asm.S (version_string): Set the version string from
the VERSION specified in configure.in.
* Change all Makefiles into Makefile.ams. Many major build
environment changes to get Automake/Autoconf working nicely.
1999-02-28 Gordon Matzigkeit <gord@trick.fig.org>
* NEWS: Moved from docs/NEWS.
* configure.in, acinclude.m4: New files for Autoconf. From OKUJI
Yoshinori.
* AUTHORS, INSTALL: New files.
1999-02-24 Gordon Matzigkeit <gord@trick.fig.org>
* stage1/stage1.S (after_BPB): Do a hard disk probe first, so that
we can work with IDE floppies (like the LS-120).
* Run GNU Indent on */*.[ch].
1999-02-21 Gordon Matzigkeit <gord@trick.fig.org>
* debian: Add to the distribution, since we maintain the GRUB
Debian package ourselves.
* grub/asmstub.c: New file to implement stubbed assembly functions
under Unix.
* stage1/Makefile: Delete spurious dependencies on Makefile.
* stage2/Makefile: Likewise.
* stage2_debug/Makefile: Likewise.
* grub/Makefile: Likewise.
* shared_src/fsys_ext2fs.c (ext2fs_dir): Follow symbolic links
rather than giving an error.
* shared_src/common.c (err_list): Use labeled elements to
associate messages with error codes.
* shared_src/shared.h: Make error codes into an enumerated type.
* shared_src/common.c (err_list): Add ERR_SYMLINK_LOOP.
* shared_src/shared.h: Likewise.
* shared_src/char_io.c (bcopy): Don't make any assumptions about
the length of an unsigned long.
* grub/Makefile: Treat CFLAGS, CPPFLAGS, LDFLAGS according to
GNU standards.
* stage2/Makefile: Likewise.
* e2fs_stage1_5/Makefile: Likewise.
* fat_stage1_5/Makefile: Likewise.
* ffs_stage1_5/Makefile: Likewise.
1999-02-20 Gordon Matzigkeit <gord@trick.fig.org>
* docs/index.html: Rename to grub.html, so that we don't hide
files in this directory from a web browser.
1999-02-15 Gordon Matzigkeit <gord@trick.fig.org>
* Makefile.end (PROGS): Add grub.
* grub/main.c: New file.
* grub/Makefile: New directory to contain the stage2 Unix program.
* shared_src/cmdline.c: Use substring.
* shared_src/fsys_ext2fs.c: Likewise.
* shared_src/fsys_fat.c: Likewise.
* shared_src/fsys_ffs.c: Likewise.
* shared_src/stage2.c: Likewise.
* shared_src/shared.h: Delete strcmp, declare substring.
* shared_src/char_io.c (strcmp): Rename to `substring', because
this function doesn't behave the same as libc's strcmp.
1999-02-14 Gordon Matzigkeit <gord@trick.fig.org>
* shared_src/shared.h: (addr32, data32): Delete definitions.
* stage1/stage1.S: Modify to use GAS's new .code16 semantics.
shared_src/asm.S: Likewise.
* configure: Test to see if the `addr32' instruction is supported.
Ian Lance Taylor says that GAS's interpretation of `.code16' has
changed. Older versions always generated 32-bit code, but
implicitly inserted addr32 and data32 when .code16 was given.
Newer versions generate 16-bit code, and require manual addr32 and
data32 overrides.
* shared_src/shared.h: Add some assertions to check that buffer
addresses are properly defined.
1999-02-12 Gordon Matzigkeit <gord@trick.fig.org>
* shared_src/stage2.c (run_menu): Pause if we failed to boot both
the default and fallback entries.
* configure: Check to make sure that GAS actually honors .code16
directives.
1999-02-02 Gordon Matzigkeit <gord@trick.fig.org>
* shared_src/asm.S: Fix typo that called interrupt 0xd (decimal
13) instead of 0x13.
1999-01-31 Gordon Matzigkeit <gord@trick.fig.org>
* e2fs_stage1_5/Makefile: Avoid gratuitous dependencies on
Makefile.
* fat_stage1_5/Makefile: Likewise.
* ffs_stage1_5/Makefile: Likewise.
* Makefile.end (PROGS): Add e2fs_stage1_5, fat_stage1_5, and
grubinst.
(distclean): New GNU standard rule.
1998-10-23 Gordon Matzigkeit <gord@trick.fig.org>
* configure: Accept `--host' as a synonym for `--target', and
accept a non-optional argument as the target name. Join the
prefix to the tool name with a hyphen.
* shared_src/disk_io.c (print_fsys_type): Always print the
partition type.
* shared_src/stage2.c (run_menu): Check to make sure that the
fallback entry is nonnegative.
(run_menu): For consistency, use `e' rather than enter to edit the
command entry.