stage2/shared.h

/* shared.h - definitions used in all GRUB-specific code */
/*
 *  GRUB  --  GRand Unified Bootloader
 *  Copyright (C) 1996  Erich Boleyn  <erich@uruk.org>
 *  Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

/*
 *  Generic defines to use anywhere
 */

#ifndef GRUB_SHARED_HEADER
#define GRUB_SHARED_HEADER	1

#include <config.h>

/* Add an underscore to a C symbol in assembler code if needed. */
#ifdef HAVE_ASM_USCORE
# define EXT_C(sym) _ ## sym
#else
# define EXT_C(sym) sym
#endif

/* Maybe redirect memory requests through grub_scratch_mem. */
#ifdef GRUB_UTIL
extern char *grub_scratch_mem;
# define RAW_ADDR(x) ((x) + (int) grub_scratch_mem)
# define RAW_SEG(x) (RAW_ADDR ((x) << 4) >> 4)
#else
# define RAW_ADDR(x) (x)
# define RAW_SEG(x) (x)
#endif

/*
 *  Integer sizes
 */

#define MAXINT     0x7FFFFFFF

/* Maximum command line size. Before you blindly increase this value,
   see the comment in char_io.c (get_cmdline).  */
#define MAX_CMDLINE 1600
#define NEW_HEAPSIZE 1500

/* 512-byte scratch area */
#define SCRATCHADDR  RAW_ADDR (0x77e00)
#define SCRATCHSEG   RAW_SEG (0x77e0)

/*
 *  This is the location of the raw device buffer.  It is 31.5K
 *  in size.
 */

#define BUFFERLEN   0x7e00
#define BUFFERADDR  RAW_ADDR (0x70000)
#define BUFFERSEG   RAW_SEG (0x7000)

#define BOOT_PART_TABLE	RAW_ADDR (0x07be)

/*
 *  BIOS disk defines
 */
#define BIOSDISK_READ		    0x0
#define BIOSDISK_WRITE		    0x1
#define BIOSDISK_ERROR_GEOMETRY     0x100
#define BIOSDISK_FLAG_LBA_EXTENSION 0x1

/*
 *  This is the filesystem (not raw device) buffer.
 *  It is 32K in size, do not overrun!
 */

#define FSYS_BUFLEN  0x8000
#define FSYS_BUF RAW_ADDR (0x68000)

/* Command-line buffer for Multiboot kernels and modules. This area
   includes the area into which Stage 1.5 and Stage 1 are loaded, but
   that's no problem.  */
#define MB_CMDLINE_BUF		RAW_ADDR (0x2000)
#define MB_CMDLINE_BUFLEN	0x6000

/* The buffer for the password.  */
#define PASSWORD_BUF		RAW_ADDR (0x78000)
#define PASSWORD_BUFLEN		0x200

/* The buffer for the command-line.  */
#define CMDLINE_BUF		(PASSWORD_BUF + PASSWORD_BUFLEN)
#define CMDLINE_BUFLEN		MAX_CMDLINE

/* The kill buffer for the command-line.  */
#define KILL_BUF		(CMDLINE_BUF + CMDLINE_BUFLEN)
#define KILL_BUFLEN		MAX_CMDLINE

/* The history buffer for the command-line.  */
#define HISTORY_BUF		(KILL_BUF + KILL_BUFLEN)
#define HISTORY_SIZE		5
#define HISTORY_BUFLEN		(MAX_CMDLINE * HISTORY_SIZE)

/* The buffer for the completion.  */
#define COMPLETION_BUF		(HISTORY_BUF + HISTORY_BUFLEN)
#define COMPLETION_BUFLEN	MAX_CMDLINE

/* The buffer for the unique string.  */
#define UNIQUE_BUF		(COMPLETION_BUF + COMPLETION_BUFLEN)
#define UNIQUE_BUFLEN		MAX_CMDLINE

/* The buffer for the menu entries.  */
#define MENU_BUF		(UNIQUE_BUF + UNIQUE_BUFLEN)
#define MENU_BUFLEN		(0x8000 + PASSWORD_BUF - UNIQUE_BUF)

/* The size of the drive map.  */
#define DRIVE_MAP_SIZE		8

/* The size of the key map.  */
#define KEY_MAP_SIZE		128

/* The size of the io map.  */
#define IO_MAP_SIZE		128

/*
 *  Linux setup parameters
 */

#define LINUX_MAGIC_SIGNATURE		0x53726448	/* "HdrS" */
#define LINUX_DEFAULT_SETUP_SECTS	4
#define LINUX_FLAG_CAN_USE_HEAP		0x80
#define LINUX_INITRD_MAX_ADDRESS	0x38000000
#define LINUX_MAX_SETUP_SECTS		63
#define LINUX_BOOT_LOADER_TYPE		0x71
#define LINUX_HEAP_END_OFFSET		(0x7F00 - 0x200)

#define LINUX_STAGING_AREA        RAW_ADDR (0x100000)
#define LINUX_SETUP               RAW_ADDR (0x90000)
#define LINUX_KERNEL              RAW_ADDR (0x10000)
#define LINUX_KERNEL_MAXLEN       0x7F000
#define LINUX_SETUP_SEG           0x9020
#define LINUX_INIT_SEG            0x9000
#define LINUX_SETUP_STACK         0x7F00

#define LINUX_FLAG_BIG_KERNEL     0x1

/* Linux's video mode selection support. Actually I hate it!  */
#define LINUX_VID_MODE_NORMAL	0xFFFF
#define LINUX_VID_MODE_EXTENDED	0xFFFE
#define LINUX_VID_MODE_ASK	0xFFFD

#define CL_MY_LOCATION  RAW_ADDR (0x97F00)
#define CL_MY_END_ADDR  RAW_ADDR (0x97FFF)
#define CL_MAGIC        0xA33F
#define CL_BASE_ADDR    RAW_ADDR (0x90000)

/*
 *  General disk stuff
 */

#define SECTOR_SIZE		0x200
#define SECTOR_BITS		9
#define BIOS_FLAG_FIXED_DISK	0x80

#define BOOTSEC_LOCATION		RAW_ADDR (0x7C00)
#define BOOTSEC_SIGNATURE		0xAA55
#define BOOTSEC_BPB_OFFSET		0x3
#define BOOTSEC_BPB_LENGTH		0x3B
#define BOOTSEC_BPB_SYSTEM_ID		0x3
#define BOOTSEC_BPB_HIDDEN_SECTORS	0x1C
#define BOOTSEC_PART_OFFSET		0x1BE
#define BOOTSEC_PART_LENGTH		0x40
#define BOOTSEC_SIG_OFFSET		0x1FE
#define BOOTSEC_LISTSIZE		8

/* Not bad, perhaps.  */
#define NETWORK_DRIVE	0x20

/*
 *  GRUB specific information
 *    (in LSB order)
 */

#include <stage1.h>

#define STAGE2_VER_MAJ_OFFS	0x6
#define STAGE2_INSTALLPART	0x8
#define STAGE2_SAVED_ENTRYNO	0xc
#define STAGE2_STAGE2_ID	0x10
#define STAGE2_FORCE_LBA	0x11
#define STAGE2_VER_STR_OFFS	0x12

/* Stage 2 identifiers */
#define STAGE2_ID_STAGE2		0
#define STAGE2_ID_FFS_STAGE1_5		1
#define STAGE2_ID_E2FS_STAGE1_5		2
#define STAGE2_ID_FAT_STAGE1_5		3
#define STAGE2_ID_MINIX_STAGE1_5	4
#define STAGE2_ID_REISERFS_STAGE1_5	5

#ifndef STAGE1_5
# define STAGE2_ID	STAGE2_ID_STAGE2
#else
# if defined(FSYS_FFS)
#  define STAGE2_ID	STAGE2_ID_FFS_STAGE1_5
# elif defined(FSYS_EXT2FS)
#  define STAGE2_ID	STAGE2_ID_E2FS_STAGE1_5
# elif defined(FSYS_FAT)
#  define STAGE2_ID	STAGE2_ID_FAT_STAGE1_5
# elif defined(FSYS_MINIX)
#  define STAGE2_ID	STAGE2_ID_MINIX_STAGE1_5
# elif defined(FSYS_REISERFS)
#  define STAGE2_ID	STAGE2_ID_REISERFS_STAGE1_5
# else
#  error "unknown Stage 2"
# endif
#endif

/*
 *  defines for use when switching between real and protected mode
 */

#define CR0_PE_ON	0x1
#define CR0_PE_OFF	0xfffffffe
#define PROT_MODE_CSEG	0x8
#define PROT_MODE_DSEG  0x10
#define PSEUDO_RM_CSEG	0x18
#define PSEUDO_RM_DSEG	0x20
#define STACKOFF	(0x2000 - 0x10)
#define PROTSTACKINIT   (FSYS_BUF - 0x10)


/*
 * Assembly code defines
 *
 * "EXT_C" is assumed to be defined in the Makefile by the configure
 *   command.
 */

#define ENTRY(x) .globl EXT_C(x) ; EXT_C(x) ## :
#define VARIABLE(x) ENTRY(x)


#define K_RDWR  	0x60	/* keyboard data & cmds (read/write) */
#define K_STATUS	0x64	/* keyboard status */
#define K_CMD		0x64	/* keybd ctlr command (write-only) */

#define K_OBUF_FUL 	0x01	/* output buffer full */
#define K_IBUF_FUL 	0x02	/* input buffer full */

#define KC_CMD_WIN	0xd0	/* read  output port */
#define KC_CMD_WOUT	0xd1	/* write output port */
#define KB_OUTPUT_MASK  0xdd	/* enable output buffer full interrupt
				   enable data line
				   enable clock line */
#define KB_A20_ENABLE   0x02

/* Codes for getchar. */
#define ASCII_CHAR(x)   ((x) & 0xFF)
#if !defined(GRUB_UTIL) || !defined(HAVE_LIBCURSES)
# define KEY_LEFT        0x4B00
# define KEY_RIGHT       0x4D00
# define KEY_UP          0x4800
# define KEY_DOWN        0x5000
# define KEY_IC          0x5200	/* insert char */
# define KEY_DC          0x5300	/* delete char */
# define KEY_BACKSPACE   0x0008
# define KEY_HOME        0x4700
# define KEY_END         0x4F00
# define KEY_NPAGE       0x4900
# define KEY_PPAGE       0x5100
# define A_NORMAL        0x7
# define A_REVERSE       0x70
#elif defined(HAVE_NCURSES_CURSES_H)
# include <ncurses/curses.h>
#elif defined(HAVE_NCURSES_H)
# include <ncurses.h>
#elif defined(HAVE_CURSES_H)
# include <curses.h>
#endif

/* In old BSD curses, A_NORMAL and A_REVERSE are not defined, so we
   define them here if they are undefined.  */
#ifndef A_NORMAL
# define A_NORMAL	0
#endif /* ! A_NORMAL */
#ifndef A_REVERSE
# ifdef A_STANDOUT
#  define A_REVERSE	A_STANDOUT
# else /* ! A_STANDOUT */
#  define A_REVERSE	0
# endif /* ! A_STANDOUT */
#endif /* ! A_REVERSE */

/* Define ACS_* ourselves, since the definitions are not consistent among
   various curses implementations.  */
#undef ACS_ULCORNER
#undef ACS_URCORNER
#undef ACS_LLCORNER
#undef ACS_LRCORNER
#undef ACS_HLINE
#undef ACS_VLINE
#undef ACS_LARROW
#undef ACS_RARROW
#undef ACS_UARROW
#undef ACS_DARROW

#define ACS_ULCORNER	'+'
#define ACS_URCORNER	'+'
#define ACS_LLCORNER	'+'
#define ACS_LRCORNER	'+'
#define ACS_HLINE	'-'
#define ACS_VLINE	'|'
#define ACS_LARROW	'<'
#define ACS_RARROW	'>'
#define ACS_UARROW	'^'
#define ACS_DARROW	'v'

/* Special graphics characters for IBM displays. */
#ifdef GRUB_UTIL
# define DISP_UL	ACS_ULCORNER
# define DISP_UR	ACS_URCORNER
# define DISP_LL	ACS_LLCORNER
# define DISP_LR	ACS_LRCORNER
# define DISP_HORIZ	ACS_HLINE
# define DISP_VERT	ACS_VLINE
# define DISP_LEFT	ACS_LARROW
# define DISP_RIGHT	ACS_RARROW
# define DISP_UP	ACS_UARROW
# define DISP_DOWN	ACS_DARROW
#else /* ! GRUB_UTIL */
# define DISP_UL	218
# define DISP_UR	191
# define DISP_LL	192
# define DISP_LR	217
# define DISP_HORIZ	196
# define DISP_VERT	179
# define DISP_LEFT	0x1b
# define DISP_RIGHT	0x1a
# define DISP_UP	0x18
# define DISP_DOWN	0x19
#endif /* ! GRUB_UTIL */

/* Remap some libc-API-compatible function names so that we prevent
   circularararity. */
#ifndef WITHOUT_LIBC_STUBS
#define memmove grub_memmove
#define memcpy grub_memmove	/* we don't need a separate memcpy */
#define memset grub_memset
#define isspace grub_isspace
#define printf grub_printf
#define sprintf grub_sprintf
#undef putchar
#define putchar grub_putchar
#define strncat grub_strncat
#define strstr grub_strstr
#define memcmp grub_memcmp
#define strcmp grub_strcmp
#define tolower grub_tolower
#define strlen grub_strlen
#define strcpy grub_strcpy
#endif /* WITHOUT_LIBC_STUBS */


#ifndef ASM_FILE
/*
 *  Below this should be ONLY defines and other constructs for C code.
 */

/* multiboot stuff */

#include "mb_header.h"
#include "mb_info.h"

/* For the Linux/i386 boot protocol version 2.02.  */
struct linux_kernel_header
{
  char code1[0x0020];
  unsigned short cl_magic;		/* Magic number 0xA33F */
  unsigned short cl_offset;		/* The offset of command line */
  char code2[0x01F1 - 0x0020 - 2 - 2];
  unsigned char setup_sects;		/* The size of the setup in sectors */
  unsigned short root_flags;		/* If the root is mounted readonly */
  unsigned short syssize;		/* obsolete */
  unsigned short swap_dev;		/* obsolete */
  unsigned short ram_size;		/* obsolete */
  unsigned short vid_mode;		/* Video mode control */
  unsigned short root_dev;		/* Default root device number */
  unsigned short boot_flag;		/* 0xAA55 magic number */
  unsigned short jump;			/* Jump instruction */
  unsigned long header;			/* Magic signature "HdrS" */
  unsigned short version;		/* Boot protocol version supported */
  unsigned long realmode_swtch;		/* Boot loader hook */
  unsigned long start_sys;		/* Points to kernel version string */
  unsigned char type_of_loader;		/* Boot loader identifier */
  unsigned char loadflags;		/* Boot protocol option flags */
  unsigned short setup_move_size;	/* Move to high memory size */
  unsigned long code32_start;		/* Boot loader hook */
  unsigned long ramdisk_image;		/* initrd load address */
  unsigned long ramdisk_size;		/* initrd size */
  unsigned long bootsect_kludge;	/* obsolete */
  unsigned short heap_end_ptr;		/* Free memory after setup end */
  unsigned short pad1;			/* Unused */
  unsigned long cmd_line_ptr;		/* Points to the kernel command line */
} __attribute__ ((packed));

/* Memory map address range descriptor used by GET_MMAP_ENTRY. */
struct mmar_desc
{
  unsigned long desc_len;	/* Size of this descriptor. */
  unsigned long long addr;	/* Base address. */
  unsigned long long length;	/* Length in bytes. */
  unsigned long type;		/* Type of address range. */
};

/* VBE controller information.  */
struct vbe_controller
{
  unsigned char signature[4];
  unsigned short version;
  unsigned long oem_string;
  unsigned long capabilities;
  unsigned long video_mode;
  unsigned short total_memory;
  unsigned short oem_software_rev;
  unsigned long oem_vendor_name;
  unsigned long oem_product_name;
  unsigned long oem_product_rev;
  unsigned char reserved[222];
  unsigned char oem_data[256];
} __attribute__ ((packed));

/* VBE mode information.  */
struct vbe_mode
{
  unsigned short mode_attributes;
  unsigned char win_a_attributes;
  unsigned char win_b_attributes;
  unsigned short win_granularity;
  unsigned short win_size;
  unsigned short win_a_segment;
  unsigned short win_b_segment;
  unsigned long win_func;
  unsigned short bytes_per_scanline;

  /* >=1.2 */
  unsigned short x_resolution;
  unsigned short y_resolution;
  unsigned char x_char_size;
  unsigned char y_char_size;
  unsigned char number_of_planes;
  unsigned char bits_per_pixel;
  unsigned char number_of_banks;
  unsigned char memory_model;
  unsigned char bank_size;
  unsigned char number_of_image_pages;
  unsigned char reserved0;

  /* direct color */
  unsigned char red_mask_size;
  unsigned char red_field_position;
  unsigned char green_mask_size;
  unsigned char green_field_position;
  unsigned char blue_mask_size;
  unsigned char blue_field_position;
  unsigned char reserved_mask_size;
  unsigned char reserved_field_position;
  unsigned char direct_color_mode_info;

  /* >=2.0 */
  unsigned long phys_base;
  unsigned long reserved1;
  unsigned short reversed2;

  /* >=3.0 */
  unsigned short linear_bytes_per_scanline;
  unsigned char banked_number_of_image_pages;
  unsigned char linear_number_of_image_pages;
  unsigned char linear_red_mask_size;
  unsigned char linear_red_field_position;
  unsigned char linear_green_mask_size;
  unsigned char linear_green_field_position;
  unsigned char linear_blue_mask_size;
  unsigned char linear_blue_field_position;
  unsigned char linear_reserved_mask_size;
  unsigned char linear_reserved_field_position;
  unsigned long max_pixel_clock;

  unsigned char reserved3[189];
} __attribute__ ((packed));


#undef NULL
#define NULL         ((void *) 0)

/* Error codes (descriptions are in common.c) */
typedef enum
{
  ERR_NONE = 0,
  ERR_BAD_FILENAME,
  ERR_BAD_FILETYPE,
  ERR_BAD_GZIP_DATA,
  ERR_BAD_GZIP_HEADER,
  ERR_BAD_PART_TABLE,
  ERR_BAD_VERSION,
  ERR_BELOW_1MB,
  ERR_BOOT_COMMAND,
  ERR_BOOT_FAILURE,
  ERR_BOOT_FEATURES,
  ERR_DEV_FORMAT,
  ERR_DEV_VALUES,
  ERR_EXEC_FORMAT,
  ERR_FILELENGTH,
  ERR_FILE_NOT_FOUND,
  ERR_FSYS_CORRUPT,
  ERR_FSYS_MOUNT,
  ERR_GEOM,
  ERR_NEED_LX_KERNEL,
  ERR_NEED_MB_KERNEL,
  ERR_NO_DISK,
  ERR_NO_PART,
  ERR_NUMBER_PARSING,
  ERR_OUTSIDE_PART,
  ERR_READ,
  ERR_SYMLINK_LOOP,
  ERR_UNRECOGNIZED,
  ERR_WONT_FIT,
  ERR_WRITE,
  ERR_BAD_ARGUMENT,
  ERR_UNALIGNED,
  ERR_PRIVILEGED,

  MAX_ERR_NUM
} grub_error_t;

extern unsigned long install_partition;
extern unsigned long boot_drive;
extern unsigned long install_second_sector;
extern struct apm_info apm_bios_info;
extern unsigned long boot_part_addr;
extern unsigned long boot_part_offset;
extern int saved_entryno;
extern unsigned char force_lba;
extern char version_string[];
extern char config_file[];
extern unsigned long linux_text_len;

#ifdef GRUB_UTIL
/* If not using config file, this variable is set to zero,
   otherwise non-zero.  */
extern int use_config_file;
/* If not using curses, this variable is set to zero, otherwise non-zero.  */
extern int use_curses;
/* The flag for verbose messages.  */
extern int verbose;
/* The flag for read-only.  */
extern int read_only;
/* The number of floppies to be probed.  */
extern int floppy_disks;
/* The map between BIOS drives and UNIX device file names.  */
extern char **device_map;
/* The filename which stores the information about a device map.  */
extern char *device_map_file;
/* The array of geometries.  */
extern struct geometry *disks;
/* Assign DRIVE to a device name DEVICE.  */
extern void assign_device_name (int drive, const char *device);
#endif

#ifndef STAGE1_5
/* GUI interface variables. */
extern int fallback_entry;
extern int default_entry;
extern int current_entryno;

/* The constants for password types.  */
typedef enum
{
  PASSWORD_PLAIN,
  PASSWORD_MD5,
  PASSWORD_UNSUPPORTED
}
password_t;

extern char *password;
extern password_t password_type;
extern int auth;
extern char commands[];
#endif

#ifndef NO_DECOMPRESSION
extern int no_decompression;
extern int compressed_file;
#endif

/* instrumentation variables */
extern void (*disk_read_hook) (int, int, int);
extern void (*disk_read_func) (int, int, int);

#ifndef STAGE1_5
/* The flag for debug mode.  */
extern int debug;
/* Color settings */
extern int normal_color, highlight_color;
#endif /* STAGE1_5 */

extern unsigned long current_drive;
extern unsigned long current_partition;

extern int fsys_type;

/* The information for a disk geometry. The CHS information is only for
   DOS/Partition table compatibility, and the real number of sectors is
   stored in TOTAL_SECTORS.  */
struct geometry
{
  /* The number of cylinders */
  unsigned long cylinders;
  /* The number of heads */
  unsigned long heads;
  /* The number of sectors */
  unsigned long sectors;
  /* The total number of sectors */
  unsigned long total_sectors;
  /* Flags */
  unsigned long flags;
};

extern long part_start;
extern long part_length;

extern int current_slice;

extern int buf_drive;
extern int buf_track;
extern struct geometry buf_geom;

/* these are the current file position and maximum file position */
extern int filepos;
extern int filemax;

/*
 *  Common BIOS/boot data.
 */

extern struct multiboot_info mbi;
extern unsigned long saved_drive;
extern unsigned long saved_partition;
#ifndef STAGE1_5
extern unsigned long saved_mem_upper;
extern unsigned long extended_memory;
#endif

/*
 *  Error variables.
 */

extern grub_error_t errnum;
extern char *err_list[];

/* Simplify declaration of entry_addr. */
typedef void (*entry_func) (int, int, int, int, int, int)
     __attribute__ ((noreturn));

extern entry_func entry_addr;

/* Enter the stage1.5/stage2 C code after the stack is set up. */
void cmain (void);

/* Halt the processor (called after an unrecoverable error). */
void stop (void) __attribute__ ((noreturn));

/* Reboot the system.  */
void grub_reboot (void) __attribute__ ((noreturn));

/* Halt the system, using APM if possible. If NO_APM is true, don't use
   APM even if it is available.  */
void grub_halt (int no_apm) __attribute__ ((noreturn));

/* Copy MAP to the drive map and set up int13_handler.  */
void set_int13_handler (unsigned short *map);

/* Set up int15_handler.  */
void set_int15_handler (void);

/* Restore the original int15 handler.  */
void unset_int15_handler (void);

/* Track the int13 handler to probe I/O address space.  */
void track_int13 (int drive);

/* The key map.  */
extern unsigned short bios_key_map[];
extern unsigned short ascii_key_map[];
extern unsigned short io_map[];

/* calls for direct boot-loader chaining */
void chain_stage1 (unsigned long segment, unsigned long offset,
		   unsigned long part_table_addr)
     __attribute__ ((noreturn));
void chain_stage2 (unsigned long segment, unsigned long offset,
		   int second_sector)
     __attribute__ ((noreturn));

/* do some funky stuff, then boot linux */
void linux_boot (void) __attribute__ ((noreturn));

/* do some funky stuff, then boot bzImage linux */
void big_linux_boot (void) __attribute__ ((noreturn));

/* booting a multiboot executable */
void multi_boot (int start, int mb_info) __attribute__ ((noreturn));

/* If LINEAR is nonzero, then set the Intel processor to linear mode.
   Otherwise, bit 20 of all memory accesses is always forced to zero,
   causing a wraparound effect for bugwards compatibility with the
   8086 CPU. */
void gateA20 (int linear);

/* memory probe routines */
int get_memsize (int type);
int get_eisamemsize (void);

/* Fetch the next entry in the memory map and return the continuation
   value.  DESC is a pointer to the descriptor buffer, and CONT is the
   previous continuation value (0 to get the first entry in the
   map). */
int get_mmap_entry (struct mmar_desc *desc, int cont);

/* Get the linear address of a ROM configuration table. Return zero,
   if fails.  */
unsigned long get_rom_config_table (void);

/* Get APM BIOS information.  */
void get_apm_info (void);

/* Get VBE controller information.  */
int get_vbe_controller_info (struct vbe_controller *controller);

/* Get VBE mode information.  */
int get_vbe_mode_info (int mode_number, struct vbe_mode *mode);

/* Set VBE mode.  */
int set_vbe_mode (int mode_number);

/* Return the data area immediately following our code. */
int get_code_end (void);

/* low-level timing info */
int getrtsecs (void);
int currticks (void);

/* Clear the screen. */
void cls (void);

/* The console part of cls.  */
void console_cls (void);

#ifndef GRUB_UTIL
/* Turn off cursor. */
void nocursor (void);
#endif

/* Get the current cursor position (where 0,0 is the top left hand
   corner of the screen).  Returns packed values, (RET >> 8) is x,
   (RET & 0xff) is y. */
int getxy (void);

/* The console part of getxy.  */
int console_getxy (void);

/* Set the cursor position. */
void gotoxy (int x, int y);

/* The console part of gotoxy.  */
void console_gotoxy (int x, int y);

/* Displays an ASCII character.  IBM displays will translate some
   characters to special graphical ones (see the DISP_* constants). */
void grub_putchar (int c);

/* The console part of grub_putchar.  */
void console_putchar (int c);

/* Wait for a keypress, and return its packed BIOS/ASCII key code.
   Use ASCII_CHAR(ret) to extract the ASCII code. */
int getkey (void);

/* The console part of getkey.  */
int console_getkey (void);

/* Like GETKEY, but doesn't block, and returns -1 if no keystroke is
   available. */
int checkkey (void);

/* The console part of checkkey.  */
int console_checkkey (void);

/* Sets text mode character attribute at the cursor position.  See A_*
   constants defined above. */
void set_attrib (int attr);

/* The console part of set_attrib.  */
void console_set_attrib (int attr);

/* Low-level disk I/O */
int get_diskinfo (int drive, struct geometry *geometry);
int biosdisk (int subfunc, int drive, struct geometry *geometry,
	      int sector, int nsec, int segment);
void stop_floppy (void);

/* Command-line interface functions. */
#ifndef STAGE1_5

/* The flags for the builtins.  */
#define BUILTIN_CMDLINE		0x1	/* Run in the command-line.  */
#define BUILTIN_MENU		0x2	/* Run in the menu.  */
#define BUILTIN_TITLE		0x4	/* Only for the command title.  */
#define BUILTIN_SCRIPT		0x8	/* Run in the script.  */
#define BUILTIN_HIDDEN		0x10	/* Don't print command on booting. */

/* The table for a builtin.  */
struct builtin
{
  /* The command name.  */
  char *name;
  /* The callback function.  */
  int (*func) (char *, int);
  /* The combination of the flags defined above.  */
  int flags;
  /* The short version of the documentation.  */
  char *short_doc;
  /* The long version of the documentation.  */
  char *long_doc;
};

/* All the builtins are registered in this.  */
extern struct builtin *builtin_table[];

/* The constants for kernel types.  */
typedef enum
{
  KERNEL_TYPE_NONE,		/* None is loaded.  */
  KERNEL_TYPE_MULTIBOOT,	/* Multiboot.  */
  KERNEL_TYPE_LINUX,		/* Linux.  */
  KERNEL_TYPE_BIG_LINUX,	/* Big Linux.  */
  KERNEL_TYPE_FREEBSD,		/* FreeBSD.  */
  KERNEL_TYPE_NETBSD,		/* NetBSD.  */
  KERNEL_TYPE_CHAINLOADER	/* Chainloader.  */
}
kernel_t;

extern kernel_t kernel_type;
extern int show_menu;
extern int grub_timeout;

/* Control the auto fill mode.  */
extern int auto_fill;

/* This variable specifies which console should be used.  */
extern int terminal;

#define TERMINAL_CONSOLE	(1 << 0)	/* keyboard and screen */
#define TERMINAL_SERIAL		(1 << 1)	/* serial console */
#define TERMINAL_HERCULES	(1 << 2)	/* hercules */

#define TERMINAL_DUMB		(1 << 16)	/* dumb terminal */

void init_builtins (void);
void init_config (void);
char *skip_to (int after_equal, char *cmdline);
struct builtin *find_command (char *command);
void print_cmdline_message (int forever);
void enter_cmdline (char *heap, int forever);
int run_script (char *script, char *heap);
#endif

/* C library replacement functions with identical semantics. */
void grub_printf (const char *format,...);
int grub_sprintf (char *buffer, const char *format, ...);
int grub_tolower (int c);
int grub_isspace (int c);
int grub_strncat (char *s1, const char *s2, int n);
void *grub_memmove (void *to, const void *from, int len);
void *grub_memset (void *start, int c, int len);
int grub_strncat (char *s1, const char *s2, int n);
char *grub_strstr (const char *s1, const char *s2);
int grub_memcmp (const char *s1, const char *s2, int n);
int grub_strcmp (const char *s1, const char *s2);
int grub_strlen (const char *str);
char *grub_strcpy (char *dest, const char *src);

#ifndef GRUB_UTIL
typedef unsigned long grub_jmp_buf[6];
#else
/* In the grub shell, use the libc jmp_buf instead.  */
# include <setjmp.h>
# define grub_jmp_buf jmp_buf
#endif

#ifdef GRUB_UTIL
# define grub_setjmp	setjmp
# define grub_longjmp	longjmp
#else /* ! GRUB_UTIL */
int grub_setjmp (grub_jmp_buf env);
void grub_longjmp (grub_jmp_buf env, int val);
#endif /* ! GRUB_UTIL */

/* The environment for restarting Stage 2.  */
extern grub_jmp_buf restart_env;
/* The environment for restarting the command-line interface.  */
extern grub_jmp_buf restart_cmdline_env;

/* misc */
void init_page (void);
void print_error (void);
char *convert_to_ascii (char *buf, int c, ...);
int get_cmdline (char *prompt, char *cmdline, int maxlen,
		 int echo_char, int history);
int substring (char *s1, char *s2);
int nul_terminate (char *str);
int get_based_digit (int c, int base);
int safe_parse_maxint (char **str_ptr, int *myint_ptr);
int memcheck (int start, int len);
int translate_keycode (int c);

#ifndef NO_DECOMPRESSION
/* Compression support. */
int gunzip_test_header (void);
int gunzip_read (char *buf, int len);
#endif /* NO_DECOMPRESSION */

int rawread (int drive, int sector, int byte_offset, int byte_len, char *buf);
int devread (int sector, int byte_offset, int byte_len, char *buf);
int rawwrite (int drive, int sector, char *buf);
int devwrite (int sector, int sector_len, char *buf);

/* Parse a device string and initialize the global parameters. */
char *set_device (char *device);
int open_device (void);
int real_open_partition (int flags);
int open_partition (void);
int next_partition (unsigned long drive, unsigned long dest,
		    unsigned long *partition, int *type,
		    unsigned long *start, unsigned long *len,
		    unsigned long *offset, int *entry,
		    unsigned long *ext_offset, char *buf);

/* Sets device to the one represented by the SAVED_* parameters. */
int make_saved_active (void);

/* Set or clear the current root partition's hidden flag.  */
int set_partition_hidden_flag (int hidden);

/* Open a file or directory on the active device, using GRUB's
   internal filesystem support. */
int grub_open (char *filename);

/* Read LEN bytes into BUF from the file that was opened with
   GRUB_OPEN.  If LEN is -1, read all the remaining data in the file.  */
int grub_read (char *buf, int len);

/* Reposition a file offset.  */
int grub_seek (int offset);

/* Close a file.  */
void grub_close (void);

/* List the contents of the directory that was opened with GRUB_OPEN,
   printing all completions. */
int dir (char *dirname);

int set_bootdev (int hdbias);

/* Display statistics on the current active device. */
void print_fsys_type (void);

/* Display device and filename completions. */
void print_a_completion (char *filename);
int print_completions (int is_filename, int is_completion);

/* Copies the current partition data to the desired address. */
void copy_current_part_entry (char *buf);

#ifndef STAGE1_5
void bsd_boot (kernel_t type, int bootdev, char *arg)
     __attribute__ ((noreturn));

/* Define flags for load_image here.  */
/* Don't pass a Linux's mem option automatically.  */
#define KERNEL_LOAD_NO_MEM_OPTION	(1 << 0)

kernel_t load_image (char *kernel, char *arg, kernel_t suggested_type,
		     unsigned long load_flags);

int load_module (char *module, char *arg);
int load_initrd (char *initrd);

int check_password(char *entered, char* expected, password_t type);
#endif

void init_bios_info (void);

#endif /* ASM_FILE */

#endif /* ! GRUB_SHARED_HEADER */