util/grub-install.in

#! /bin/sh

# Install GRUB on your drive.
#   Copyright (C) 1999 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

# Initialize some variables.
prefix=@prefix@
exec_prefix=@exec_prefix@
sbindir=@sbindir@
datadir=@datadir@
PACKAGE=@PACKAGE@
VERSION=@VERSION@
host_cpu=@host_cpu@
host_os=@host_os@
host_vendor=@host_vendor@
pkgdatadir=${datadir}/${PACKAGE}/${host_cpu}-${host_vendor}

grub_shell=${sbindir}/grub
log_file=/tmp/grub-install.log.$$
rootdir=

install_device=
debug=no

# Usage: usage
# Print the usage.
usage () {
    cat <<EOF
Usage: grub-install [OPTION] install_device
Install GRUB on your drive.

  -h, --help              print this message and exit
  -v, --version           print the version information and exit
  --root-directory=DIR    install GRUB images under the directory DIR
                          instead of the root directory.
  --grub-shell=FILE       use FILE as the grub shell.

Reports bugs to <bug-grub@gnu.org>.
EOF
}

# Usage: convert os_device
# Convert an OS device to the corresponding GRUB drive.
# This part is OS-specific.
convert () {
    # First, check if the device file exists.
    if test ! -e $1; then
	echo "$1: Not found." 1>&2
	exit 1
    fi

    # Break the device name into the disk part and the partition part.
    case $host_os in
    linux*)
	tmp_disk=`echo $1 | sed 's%[0-9]*$%%'`
	tmp_part=`echo $1 | sed "s%$tmp_disk%%"` ;;
    gnu*)
	tmp_disk=`echo $1 | sed 's%s[0-9]*[a-g]?%%'`
	tmp_part=`echo $1 | sed "s%$tmp_disk%%"` ;;
    *)
	echo "grub-install does not support your OS yet." 1>&2
	exit 1 ;;
    esac

    # Get the drive name.
    tmp_drive=`grep -v '^#' $device_map | grep $tmp_disk \
	| sed 's%.*\(([hf]d[0-9][a-g0-9,]*)\).*%\1%'`

    # If not found, print an error message and exit.
    if test "x$tmp_drive" = x; then
	echo "$1 does not have any corresponding BIOS drive." 1>&2
	exit 1
    fi

    if test "x$tmp_part" != x; then
	# If a partition is specified, we need to translate it into the
	# GRUB's syntax.
	case $host_os in
	linux*)
	    echo $tmp_drive | sed "s%)$%,`expr $tmp_part - 1`)%" ;;
	gnu*)
	    tmp_pc_slice=`echo $tmp_part | sed "s%s\([0-9]*\)[a-g]?%\1%"`
	    tmp_bsd_partition=`echo $tmp | sed "s%s[0-9]*\([a-g]?\)%\1%"`
	    tmp_drive=`echo $tmp_drive \
		| sed "s%)%,\`expr $tmp_pc_slice - 1\`)%"`
	    if test "x$tmp_bsd_partition" != x; then
		tmp_drive=`echo $tmp_drive \
		    | sed "s%)%,\`sed y%abcdefg%0123456%\`)%"`
	    fi
	    echo $tmp_drive ;;
	esac
    else
	# If no partition is specified, just print the drive name.
	echo $tmp_drive
    fi
}

# Check the arguments.
for option; do
    case "$option" in
    -h | --help)
	usage
	exit 0 ;;
    -v | --version)
	echo "grub-install (GNU GRUB ${VERSION})"
	exit 0 ;;
    --root-directory=*)
	rootdir=`echo $option | sed 's/--root-directory=//'` ;;
    --grub-shell=*)
	grub_shell=`echo $option | sed 's/--grub-shell=//'` ;;
    # This is an undocumented feature...
    --debug)
	debug=yes ;;
    *)
	if test "x$install_device" != x; then
	    usage
	    exit 1
	fi
	install_device="${option}" ;;
    esac
done

# If the debugging feature is enabled, print commands.
if test $debug = yes; then
    set -x
fi

# Initialize these directories here, since ROOTDIR was initialized.
bootdir=${rootdir}/boot
grubdir=${bootdir}/grub
device_map=${grubdir}/device.map

# Check if GRUB is installed
if test ! -f $grub_shell; then
    echo "${grub_shell}: Not found." 1>&2
    exit 1
fi

if test ! -f $pkgdatadir/stage1; then
    echo "${pkgdatadir}/stage1: Not found." 1>&2
    exit 1
fi

if test ! -f $pkgdatadir/stage2; then
    echo "${pkgdatadir}/stage2: Not found." 1>&2
    exit 1
fi

# Don't check for *stage1_5, because it is not fatal even if any
# Stage 1.5 does not exist.

# Create the GRUB directory if it is not present.
test -d $bootdir || mkdir $bootdir
test -d $grubdir || mkdir $grubdir

# Create the device map file if it is not present.
if test ! -f $device_map; then
    # Create a safe temporary file.
    test -x /bin/tempfile && log_file=`tempfile --prefix=grub`

    $grub_shell --batch --device-map=$device_map <<EOF >$log_file
quit
EOF
    if grep "Error: " $log_file >/dev/null; then
	cat $log_file 1>&2
	exit 1
    fi

    rm -f $log_file
fi

# Check for INSTALL_DEVICE.
if test "x$install_device" = x; then
    usage
    exit 1
else
    case "$install_device" in
    /dev/*)
	install_drive=`convert $install_device`
	# I don't know why, but some shells wouldn't die if exit is
	# called in a function.
	if test "x$install_drive" = x; then
	    exit 1
	fi ;;
    \([hf]d[0-9]*\))
	install_drive="$install_device" ;;
    *)
	usage
	exit 1 ;;
    esac
fi

# Get the root drive.
# For now, this uses the program `df' to get the device name, but is
# this really portable?
root_device=`df ${rootdir} | grep /dev/ | sed 's%.*\(/dev/[a-z0-9]*\).*%\1%'`
root_drive=`convert $root_device`
if test "x$root_drive" = x; then
    exit 1
fi

# Check if the root directory exists in the same device as the grub
# directory.
grubdir_device=`df ${grubdir} | grep /dev/ | sed 's%.*\(/dev/[a-z0-9]*\).*%\1%'`
if test $grubdir_device != $root_device; then
    # For now, cannot deal with this situation.
    cat <<EOF 1&>2
You must set the root directory by the option --root-directory, because
$grubdir does not exist in the root device $root_device.
EOF
    exit 1
fi

# Copy the GRUB images to the GRUB directory.
rm -f ${grubdir}/stage1 ${grubdir}/stage2 ${grubdir}/*stage1_5
cp ${pkgdatadir}/stage1 ${pkgdatadir}/stage2 ${pkgdatadir}/*stage1_5 ${grubdir}

# Create a safe temporary file.
test -x /bin/tempfile && log_file=`tempfile --prefix=grub`

# Now perform the installation.
$grub_shell --batch --device-map=$device_map <<EOF >$log_file
root $root_drive
setup $install_drive
quit
EOF

if grep "Error: " $log_file >/dev/null; then
    cat $log_file 1>&2
    exit 1
fi

rm -f $log_file

# Prompt the user to check if the device map is correct.
echo "This is the contents of the device map $device_map."
echo "Check if this is correct or not. If any of the lines is incorrect,"
echo "fix it and re-run the script \`grub-install\'."
echo

cat $device_map

# Bye.
exit 0