| /* shared.h - definitions used in all GRUB-specific code */ |
| /* |
| * GRUB -- GRand Unified Bootloader |
| * Copyright (C) 1999,2000,2001,2002,2003,2004 Free Software Foundation, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* |
| * Generic defines to use anywhere |
| */ |
| |
| #ifndef GRUB_SHARED_HEADER |
| #define GRUB_SHARED_HEADER 1 |
| |
| #include <config.h> |
| |
| /* Add an underscore to a C symbol in assembler code if needed. */ |
| #ifdef HAVE_ASM_USCORE |
| # define EXT_C(sym) _ ## sym |
| #else |
| # define EXT_C(sym) sym |
| #endif |
| |
| /* Maybe redirect memory requests through grub_scratch_mem. */ |
| #ifdef GRUB_UTIL |
| extern char *grub_scratch_mem; |
| # define RAW_ADDR(x) ((x) + (int) grub_scratch_mem) |
| # define RAW_SEG(x) (RAW_ADDR ((x) << 4) >> 4) |
| #else |
| # define RAW_ADDR(x) (x) |
| # define RAW_SEG(x) (x) |
| #endif |
| |
| /* |
| * Integer sizes |
| */ |
| |
| #define MAXINT 0xFFFFFFFF |
| |
| /* Maximum command line size. Before you blindly increase this value, |
| see the comment in char_io.c (get_cmdline). */ |
| #define MAX_CMDLINE 1600 |
| #define NEW_HEAPSIZE 1500 |
| |
| /* 512-byte scratch area */ |
| #define SCRATCHADDR RAW_ADDR (0x77e00) |
| #define SCRATCHSEG RAW_SEG (0x77e0) |
| |
| /* |
| * This is the location of the raw device buffer. It is 31.5K |
| * in size. |
| */ |
| |
| #define BUFFERLEN 0x7e00 |
| #define BUFFERADDR RAW_ADDR (0x70000) |
| #define BUFFERSEG RAW_SEG (0x7000) |
| |
| #define BOOT_PART_TABLE RAW_ADDR (0x07be) |
| |
| /* |
| * BIOS disk defines |
| */ |
| #define BIOSDISK_READ 0x0 |
| #define BIOSDISK_WRITE 0x1 |
| #define BIOSDISK_ERROR_GEOMETRY 0x100 |
| #define BIOSDISK_FLAG_LBA_EXTENSION 0x1 |
| #define BIOSDISK_FLAG_CDROM 0x2 |
| #define BIOSDISK_FLAG_BIFURCATE 0x4 /* accessibility acts differently between chs and lba */ |
| |
| /* |
| * This is the filesystem (not raw device) buffer. |
| * It is 32K in size, do not overrun! |
| */ |
| |
| #define FSYS_BUFLEN 0x8000 |
| #define FSYS_BUF RAW_ADDR (0x68000) |
| |
| /* Command-line buffer for Multiboot kernels and modules. This area |
| includes the area into which Stage 1.5 and Stage 1 are loaded, but |
| that's no problem. */ |
| #ifndef STAGE1_5 |
| #define MB_CMDLINE_BUF RAW_ADDR (0x7000) |
| #define MB_CMDLINE_BUFLEN 0x1000 |
| #else |
| #define MB_CMDLINE_BUF RAW_ADDR (0x2000) |
| #define MB_CMDLINE_BUFLEN 0x6000 |
| #endif |
| |
| /* The buffer for the password. */ |
| #define PASSWORD_BUF RAW_ADDR (0x78000) |
| #define PASSWORD_BUFLEN 0x200 |
| |
| /* THe buffer for the filename of "/boot/grub/default". */ |
| #define DEFAULT_FILE_BUF (PASSWORD_BUF + PASSWORD_BUFLEN) |
| #define DEFAULT_FILE_BUFLEN 0x60 |
| |
| /* The buffer for the command-line. */ |
| #define CMDLINE_BUF (DEFAULT_FILE_BUF + DEFAULT_FILE_BUFLEN) |
| #define CMDLINE_BUFLEN MAX_CMDLINE |
| |
| ///* The kill buffer for the command-line. */ |
| //#define KILL_BUF (CMDLINE_BUF + CMDLINE_BUFLEN) |
| //#define KILL_BUFLEN MAX_CMDLINE |
| |
| /* The history buffer for the command-line. */ |
| //#define HISTORY_BUF (KILL_BUF + KILL_BUFLEN) |
| #define HISTORY_BUF (CMDLINE_BUF + CMDLINE_BUFLEN) |
| #define HISTORY_SIZE 5 |
| #define HISTORY_BUFLEN (MAX_CMDLINE * HISTORY_SIZE) |
| |
| /* The buffer for the completion. */ |
| #define COMPLETION_BUF (HISTORY_BUF + HISTORY_BUFLEN) |
| #define COMPLETION_BUFLEN MAX_CMDLINE |
| |
| /* The buffer for the unique string. */ |
| #define UNIQUE_BUF (COMPLETION_BUF + COMPLETION_BUFLEN) |
| #define UNIQUE_BUFLEN MAX_CMDLINE |
| |
| /* The buffer for the menu entries. */ |
| //#define MENU_BUF (UNIQUE_BUF + UNIQUE_BUFLEN) |
| //#define MENU_BUFLEN (0x8000 + PASSWORD_BUF - MENU_BUF) |
| |
| /* The size of the drive map. */ |
| #define DRIVE_MAP_SIZE 8 |
| |
| /* The size of the drive_map_slot struct. */ |
| #define DRIVE_MAP_SLOT_SIZE 24 |
| |
| /* The size of the key map. */ |
| #define KEY_MAP_SIZE 128 |
| |
| /* |
| * extended chainloader code address for switching to real mode |
| */ |
| |
| #define HMA_ADDR 0x2B0000 |
| |
| /* |
| * Linux setup parameters |
| */ |
| |
| #define LINUX_MAGIC_SIGNATURE 0x53726448 /* "HdrS" */ |
| #define LINUX_DEFAULT_SETUP_SECTS 4 |
| #define LINUX_FLAG_CAN_USE_HEAP 0x80 |
| #define LINUX_INITRD_MAX_ADDRESS 0x38000000 |
| #define LINUX_MAX_SETUP_SECTS 64 |
| #define LINUX_BOOT_LOADER_TYPE 0x71 |
| #define LINUX_HEAP_END_OFFSET (0x9000 - 0x200) |
| |
| #define LINUX_BZIMAGE_ADDR RAW_ADDR (0x100000) |
| #define LINUX_ZIMAGE_ADDR RAW_ADDR (0x10000) |
| #define LINUX_OLD_REAL_MODE_ADDR RAW_ADDR (0x90000) |
| #define LINUX_SETUP_STACK 0x9000 |
| |
| #define LINUX_FLAG_BIG_KERNEL 0x1 |
| |
| /* Linux's video mode selection support. Actually I hate it! */ |
| #define LINUX_VID_MODE_NORMAL 0xFFFF |
| #define LINUX_VID_MODE_EXTENDED 0xFFFE |
| #define LINUX_VID_MODE_ASK 0xFFFD |
| |
| #define LINUX_CL_OFFSET 0x9000 |
| #define LINUX_CL_END_OFFSET 0x93FF |
| #define LINUX_SETUP_MOVE_SIZE 0x9400 |
| #define LINUX_CL_MAGIC 0xA33F |
| |
| /* |
| * General disk stuff |
| */ |
| |
| #define SECTOR_SIZE 0x200 |
| #define SECTOR_BITS 9 |
| #define BIOS_FLAG_FIXED_DISK 0x80 |
| |
| #define BOOTSEC_LOCATION RAW_ADDR (0x7C00) |
| #define BOOTSEC_SIGNATURE 0xAA55 |
| #define BOOTSEC_BPB_OFFSET 0x3 |
| #define BOOTSEC_BPB_LENGTH 0x3B |
| #define BOOTSEC_BPB_SYSTEM_ID 0x3 |
| #define BOOTSEC_BPB_HIDDEN_SECTORS 0x1C |
| #define BOOTSEC_PART_OFFSET 0x1BE |
| #define BOOTSEC_PART_LENGTH 0x40 |
| #define BOOTSEC_SIG_OFFSET 0x1FE |
| #define BOOTSEC_LISTSIZE 8 |
| |
| /* Not bad, perhaps. */ |
| #define NETWORK_DRIVE 0x20 |
| |
| #define PXE_DRIVE 0x21 |
| #define INITRD_DRIVE 0x22 |
| #define FB_DRIVE 0x23 |
| |
| /* |
| * GRUB specific information |
| * (in LSB order) |
| */ |
| |
| #include <stage1.h> |
| |
| #define STAGE2_VER_MAJ_OFFS 0x6 |
| #define STAGE2_INSTALLPART 0x8 |
| #define STAGE2_SAVED_ENTRYNO 0xc |
| #define STAGE2_STAGE2_ID 0x10 |
| #define STAGE2_FORCE_LBA 0x11 |
| #define STAGE2_VER_STR_OFFS 0x12 |
| |
| /* Stage 2 identifiers */ |
| #define STAGE2_ID_STAGE2 0 |
| #define STAGE2_ID_FFS_STAGE1_5 1 |
| #define STAGE2_ID_E2FS_STAGE1_5 2 |
| #define STAGE2_ID_FAT_STAGE1_5 3 |
| #define STAGE2_ID_MINIX_STAGE1_5 4 |
| #define STAGE2_ID_REISERFS_STAGE1_5 5 |
| #define STAGE2_ID_VSTAFS_STAGE1_5 6 |
| #define STAGE2_ID_JFS_STAGE1_5 7 |
| #define STAGE2_ID_XFS_STAGE1_5 8 |
| #define STAGE2_ID_ISO9660_STAGE1_5 9 |
| #define STAGE2_ID_UFS2_STAGE1_5 10 |
| #define STAGE2_ID_NTFS_STAGE1_5 11 |
| |
| #ifndef STAGE1_5 |
| # define STAGE2_ID STAGE2_ID_STAGE2 |
| #else |
| # if defined(FSYS_FFS) |
| # define STAGE2_ID STAGE2_ID_FFS_STAGE1_5 |
| # elif defined(FSYS_EXT2FS) |
| # define STAGE2_ID STAGE2_ID_E2FS_STAGE1_5 |
| # elif defined(FSYS_FAT) |
| # define STAGE2_ID STAGE2_ID_FAT_STAGE1_5 |
| # elif defined(FSYS_NTFS) |
| # define STAGE2_ID STAGE2_ID_NTFS_STAGE1_5 |
| # elif defined(FSYS_MINIX) |
| # define STAGE2_ID STAGE2_ID_MINIX_STAGE1_5 |
| # elif defined(FSYS_REISERFS) |
| # define STAGE2_ID STAGE2_ID_REISERFS_STAGE1_5 |
| # elif defined(FSYS_VSTAFS) |
| # define STAGE2_ID STAGE2_ID_VSTAFS_STAGE1_5 |
| # elif defined(FSYS_JFS) |
| # define STAGE2_ID STAGE2_ID_JFS_STAGE1_5 |
| # elif defined(FSYS_XFS) |
| # define STAGE2_ID STAGE2_ID_XFS_STAGE1_5 |
| # elif defined(FSYS_ISO9660) |
| # define STAGE2_ID STAGE2_ID_ISO9660_STAGE1_5 |
| # elif defined(FSYS_UFS2) |
| # define STAGE2_ID STAGE2_ID_UFS2_STAGE1_5 |
| # else |
| # error "unknown Stage 2" |
| # endif |
| #endif |
| |
| /* |
| * defines for use when switching between real and protected mode |
| */ |
| |
| #define CR0_PE_ON 0x1 |
| #define CR0_PE_OFF 0xfffffffe |
| #define PROT_MODE_CSEG 0x8 |
| #define PROT_MODE_DSEG 0x10 |
| #define PSEUDO_RM_CSEG 0x18 |
| #define PSEUDO_RM_DSEG 0x20 |
| #define STACKOFF MB_CMDLINE_BUF /* (0x2000 - 0x10) */ |
| #define PROTSTACKINIT (FSYS_BUF - 0x10) |
| |
| |
| /* |
| * Assembly code defines |
| * |
| * "EXT_C" is assumed to be defined in the Makefile by the configure |
| * command. |
| */ |
| |
| #define ENTRY(x) .globl EXT_C(x) ; EXT_C(x): |
| #define VARIABLE(x) ENTRY(x) |
| |
| |
| #define K_RDWR 0x60 /* keyboard data & cmds (read/write) */ |
| #define K_STATUS 0x64 /* keyboard status */ |
| #define K_CMD 0x64 /* keybd ctlr command (write-only) */ |
| |
| #define K_OBUF_FUL 0x01 /* output buffer full */ |
| #define K_IBUF_FUL 0x02 /* input buffer full */ |
| |
| #define KC_CMD_WIN 0xd0 /* read output port */ |
| #define KC_CMD_WOUT 0xd1 /* write output port */ |
| #define KB_OUTPUT_MASK 0xdd /* enable output buffer full interrupt |
| enable data line |
| enable clock line */ |
| #define KB_A20_ENABLE 0x02 |
| |
| /* Codes for getchar. */ |
| #define ASCII_CHAR(x) ((x) & 0xFF) |
| #if !defined(GRUB_UTIL) || !defined(HAVE_LIBCURSES) |
| # define KEY_LEFT 0x4B00 |
| # define KEY_RIGHT 0x4D00 |
| # define KEY_UP 0x4800 |
| # define KEY_DOWN 0x5000 |
| # define KEY_IC 0x5200 /* insert char */ |
| # define KEY_DC 0x5300 /* delete char */ |
| # define KEY_BACKSPACE 0x0E08 |
| # define KEY_HOME 0x4700 |
| # define KEY_END 0x4F00 |
| # define KEY_NPAGE 0x5100 |
| # define KEY_PPAGE 0x4900 |
| # define A_NORMAL 0x7 |
| # define A_REVERSE 0x70 |
| #elif defined(HAVE_NCURSES_CURSES_H) |
| # include <ncurses/curses.h> |
| #elif defined(HAVE_NCURSES_H) |
| # include <ncurses.h> |
| #elif defined(HAVE_CURSES_H) |
| # include <curses.h> |
| #endif |
| |
| /* In old BSD curses, A_NORMAL and A_REVERSE are not defined, so we |
| define them here if they are undefined. */ |
| #ifndef A_NORMAL |
| # define A_NORMAL 0 |
| #endif /* ! A_NORMAL */ |
| #ifndef A_REVERSE |
| # ifdef A_STANDOUT |
| # define A_REVERSE A_STANDOUT |
| # else /* ! A_STANDOUT */ |
| # define A_REVERSE 0 |
| # endif /* ! A_STANDOUT */ |
| #endif /* ! A_REVERSE */ |
| |
| /* Define ACS_* ourselves, since the definitions are not consistent among |
| various curses implementations. */ |
| #undef ACS_ULCORNER |
| #undef ACS_URCORNER |
| #undef ACS_LLCORNER |
| #undef ACS_LRCORNER |
| #undef ACS_HLINE |
| #undef ACS_VLINE |
| #undef ACS_LARROW |
| #undef ACS_RARROW |
| #undef ACS_UARROW |
| #undef ACS_DARROW |
| |
| #define ACS_ULCORNER '+' |
| #define ACS_URCORNER '+' |
| #define ACS_LLCORNER '+' |
| #define ACS_LRCORNER '+' |
| #define ACS_HLINE '-' |
| #define ACS_VLINE '|' |
| #define ACS_LARROW '<' |
| #define ACS_RARROW '>' |
| #define ACS_UARROW '^' |
| #define ACS_DARROW 'v' |
| |
| /* Special graphics characters for IBM displays. */ |
| #define DISP_UL 218 |
| #define DISP_UR 191 |
| #define DISP_LL 192 |
| #define DISP_LR 217 |
| #define DISP_HORIZ 196 |
| #define DISP_VERT 179 |
| #define DISP_LEFT 0x1b |
| #define DISP_RIGHT 0x1a |
| #define DISP_UP 0x18 |
| #define DISP_DOWN 0x19 |
| |
| /* Remap some libc-API-compatible function names so that we prevent |
| circularararity. */ |
| #ifndef WITHOUT_LIBC_STUBS |
| #define memmove grub_memmove |
| #define memcpy grub_memmove /* we don't need a separate memcpy */ |
| #define memset grub_memset |
| #define isspace grub_isspace |
| #define printf grub_printf |
| #define sprintf grub_sprintf |
| #undef putchar |
| #define putchar grub_putchar |
| #define strncat grub_strncat |
| #define strstr grub_strstr |
| #define memcmp grub_memcmp |
| #define strcmp grub_strcmp |
| #define tolower grub_tolower |
| #define strlen grub_strlen |
| #define strcpy grub_strcpy |
| #endif /* WITHOUT_LIBC_STUBS */ |
| |
| #define PXE_TFTP_MODE 1 |
| #define PXE_FAST_READ 1 |
| |
| /* see typedef gfx_data_t below */ |
| #define gfx_ofs_v1_ok 0x00 |
| #define gfx_ofs_v1_mem_start 0x04 |
| #define gfx_ofs_v1_mem_cur 0x08 |
| #define gfx_ofs_v1_mem_max 0x0c |
| #define gfx_ofs_v1_code_seg 0x10 |
| #define gfx_ofs_v1_jmp_table 0x14 |
| #define gfx_ofs_v1_sys_cfg 0x44 |
| #define gfx_ofs_v1_cmdline 0x64 |
| #define gfx_ofs_v1_cmdline_len 0x68 |
| #define gfx_ofs_v1_menu_list 0x6c |
| #define gfx_ofs_v1_menu_default_entry 0x70 |
| #define gfx_ofs_v1_menu_entries 0x74 |
| #define gfx_ofs_v1_menu_entry_len 0x78 |
| #define gfx_ofs_v1_args_list 0x7c |
| #define gfx_ofs_v1_args_entry_len 0x80 |
| #define gfx_ofs_v1_timeout 0x84 |
| #define gfx_ofs_v1_mem_file 0x88 |
| #define gfx_ofs_v1_mem_align 0x8c |
| |
| #define gfx_ofs_v2_ok 0x00 |
| #define gfx_ofs_v2_code_seg 0x04 |
| #define gfx_ofs_v2_jmp_table 0x08 |
| #define gfx_ofs_v2_sys_cfg 0x38 |
| #define gfx_ofs_v2_cmdline 0x6c |
| #define gfx_ofs_v2_cmdline_len 0x70 |
| #define gfx_ofs_v2_menu_list 0x74 |
| #define gfx_ofs_v2_menu_default_entry 0x78 |
| #define gfx_ofs_v2_menu_entries 0x7c |
| #define gfx_ofs_v2_menu_entry_len 0x80 |
| #define gfx_ofs_v2_args_list 0x84 |
| #define gfx_ofs_v2_args_entry_len 0x88 |
| #define gfx_ofs_v2_timeout 0x8c |
| |
| #ifndef ASM_FILE |
| /* |
| * Below this should be ONLY defines and other constructs for C code. |
| */ |
| |
| /* multiboot stuff */ |
| |
| #include "mb_header.h" |
| #include "mb_info.h" |
| |
| /* For the Linux/i386 boot protocol version 2.03. */ |
| struct linux_kernel_header |
| { |
| char code1[0x0020]; |
| unsigned short cl_magic; /* Magic number 0xA33F */ |
| unsigned short cl_offset; /* The offset of command line */ |
| char code2[0x01F1 - 0x0020 - 2 - 2]; |
| unsigned char setup_sects; /* The size of the setup in sectors */ |
| unsigned short root_flags; /* If the root is mounted readonly */ |
| unsigned short syssize; /* obsolete */ |
| unsigned short swap_dev; /* obsolete */ |
| unsigned short ram_size; /* obsolete */ |
| unsigned short vid_mode; /* Video mode control */ |
| unsigned short root_dev; /* Default root device number */ |
| unsigned short boot_flag; /* 0xAA55 magic number */ |
| unsigned short jump; /* Jump instruction */ |
| unsigned long header; /* Magic signature "HdrS" */ |
| unsigned short version; /* Boot protocol version supported */ |
| unsigned long realmode_swtch; /* Boot loader hook */ |
| unsigned long start_sys; /* Points to kernel version string */ |
| unsigned char type_of_loader; /* Boot loader identifier */ |
| unsigned char loadflags; /* Boot protocol option flags */ |
| unsigned short setup_move_size; /* Move to high memory size */ |
| unsigned long code32_start; /* Boot loader hook */ |
| unsigned long ramdisk_image; /* initrd load address */ |
| unsigned long ramdisk_size; /* initrd size */ |
| unsigned long bootsect_kludge; /* obsolete */ |
| unsigned short heap_end_ptr; /* Free memory after setup end */ |
| unsigned short pad1; /* Unused */ |
| char *cmd_line_ptr; /* Points to the kernel command line */ |
| unsigned long initrd_addr_max; /* The highest address of initrd */ |
| } __attribute__ ((packed)); |
| |
| /* Memory map address range descriptor used by GET_MMAP_ENTRY. */ |
| struct mmar_desc |
| { |
| unsigned long desc_len; /* Size of this descriptor. */ |
| unsigned long long addr; /* Base address. */ |
| unsigned long long length; /* Length in bytes. */ |
| unsigned long type; /* Type of address range. */ |
| } __attribute__ ((packed)); |
| |
| /* VBE controller information. */ |
| struct vbe_controller |
| { |
| unsigned char signature[4]; |
| unsigned short version; |
| unsigned long oem_string; |
| unsigned long capabilities; |
| unsigned long video_mode; |
| unsigned short total_memory; |
| unsigned short oem_software_rev; |
| unsigned long oem_vendor_name; |
| unsigned long oem_product_name; |
| unsigned long oem_product_rev; |
| unsigned char reserved[222]; |
| unsigned char oem_data[256]; |
| } __attribute__ ((packed)); |
| |
| /* VBE mode information. */ |
| struct vbe_mode |
| { |
| unsigned short mode_attributes; |
| unsigned char win_a_attributes; |
| unsigned char win_b_attributes; |
| unsigned short win_granularity; |
| unsigned short win_size; |
| unsigned short win_a_segment; |
| unsigned short win_b_segment; |
| unsigned long win_func; |
| unsigned short bytes_per_scanline; |
| |
| /* >=1.2 */ |
| unsigned short x_resolution; |
| unsigned short y_resolution; |
| unsigned char x_char_size; |
| unsigned char y_char_size; |
| unsigned char number_of_planes; |
| unsigned char bits_per_pixel; |
| unsigned char number_of_banks; |
| unsigned char memory_model; |
| unsigned char bank_size; |
| unsigned char number_of_image_pages; |
| unsigned char reserved0; |
| |
| /* direct color */ |
| unsigned char red_mask_size; |
| unsigned char red_field_position; |
| unsigned char green_mask_size; |
| unsigned char green_field_position; |
| unsigned char blue_mask_size; |
| unsigned char blue_field_position; |
| unsigned char reserved_mask_size; |
| unsigned char reserved_field_position; |
| unsigned char direct_color_mode_info; |
| |
| /* >=2.0 */ |
| unsigned long phys_base; |
| unsigned long reserved1; |
| unsigned short reversed2; |
| |
| /* >=3.0 */ |
| unsigned short linear_bytes_per_scanline; |
| unsigned char banked_number_of_image_pages; |
| unsigned char linear_number_of_image_pages; |
| unsigned char linear_red_mask_size; |
| unsigned char linear_red_field_position; |
| unsigned char linear_green_mask_size; |
| unsigned char linear_green_field_position; |
| unsigned char linear_blue_mask_size; |
| unsigned char linear_blue_field_position; |
| unsigned char linear_reserved_mask_size; |
| unsigned char linear_reserved_field_position; |
| unsigned long max_pixel_clock; |
| |
| unsigned char reserved3[189]; |
| } __attribute__ ((packed)); |
| |
| |
| #undef NULL |
| #define NULL ((void *) 0) |
| |
| /* Error codes (descriptions are in common.c) */ |
| typedef enum |
| { |
| ERR_NONE = 0, |
| ERR_BAD_FILENAME, |
| ERR_BAD_FILETYPE, |
| ERR_BAD_GZIP_DATA, |
| ERR_BAD_GZIP_HEADER, |
| ERR_BAD_PART_TABLE, |
| ERR_BAD_VERSION, |
| ERR_BELOW_1MB, |
| ERR_BOOT_COMMAND, |
| ERR_BOOT_FAILURE, |
| ERR_BOOT_FEATURES, |
| ERR_DEV_FORMAT, |
| ERR_DEV_VALUES, |
| ERR_EXEC_FORMAT, |
| ERR_FILELENGTH, |
| ERR_FILE_NOT_FOUND, |
| ERR_FSYS_CORRUPT, |
| ERR_FSYS_MOUNT, |
| ERR_GEOM, |
| ERR_NEED_LX_KERNEL, |
| ERR_NEED_MB_KERNEL, |
| ERR_NO_DISK, |
| ERR_NO_PART, |
| ERR_NUMBER_PARSING, |
| ERR_OUTSIDE_PART, |
| ERR_READ, |
| ERR_SYMLINK_LOOP, |
| ERR_UNRECOGNIZED, |
| ERR_WONT_FIT, |
| ERR_WRITE, |
| ERR_BAD_ARGUMENT, |
| ERR_UNALIGNED, |
| ERR_PRIVILEGED, |
| ERR_DEV_NEED_INIT, |
| ERR_NO_DISK_SPACE, |
| ERR_NUMBER_OVERFLOW, |
| |
| ERR_DEFAULT_FILE, |
| ERR_DEL_MEM_DRIVE, |
| ERR_DISABLE_A20, |
| ERR_DOS_BACKUP, |
| ERR_ENABLE_A20, |
| ERR_EXTENDED_PARTITION, |
| ERR_FILENAME_FORMAT, |
| ERR_HD_VOL_START_0, |
| ERR_INT13_ON_HOOK, |
| ERR_INT13_OFF_HOOK, |
| ERR_INVALID_BOOT_CS, |
| ERR_INVALID_BOOT_IP, |
| ERR_INVALID_FLOPPIES, |
| ERR_INVALID_HARDDRIVES, |
| ERR_INVALID_HEADS, |
| ERR_INVALID_LOAD_LENGTH, |
| ERR_INVALID_LOAD_OFFSET, |
| ERR_INVALID_LOAD_SEGMENT, |
| ERR_INVALID_SECTORS, |
| ERR_INVALID_SKIP_LENGTH, |
| ERR_INVALID_RAM_DRIVE, |
| ERR_IN_SITU_FLOPPY, |
| ERR_IN_SITU_MEM, |
| ERR_MD_BASE, |
| ERR_NON_CONTIGUOUS, |
| ERR_NO_DRIVE_MAPPED, |
| ERR_NO_HEADS, |
| ERR_NO_SECTORS, |
| ERR_PARTITION_TABLE_FULL, |
| ERR_RD_BASE, |
| ERR_SPECIFY_GEOM, |
| ERR_SPECIFY_MEM, |
| ERR_SPECIFY_RESTRICTION, |
| // ERR_INVALID_RD_BASE, |
| // ERR_INVALID_RD_SIZE, |
| ERR_MD5_FORMAT, |
| ERR_WRITE_GZIP_FILE, |
| ERR_FUNC_CALL, |
| // ERR_WRITE_TO_NON_MEM_DRIVE, |
| |
| MAX_ERR_NUM |
| } grub_error_t; |
| |
| extern unsigned long install_partition; |
| extern unsigned long boot_drive; |
| //extern unsigned long install_second_sector; |
| //extern struct apm_info apm_bios_info; |
| extern unsigned long boot_part_addr; |
| extern int saved_entryno; |
| extern unsigned char force_lba; |
| extern char version_string[]; |
| extern char config_file[]; |
| extern unsigned long linux_text_len; |
| extern char *linux_data_tmp_addr; |
| extern char *linux_data_real_addr; |
| extern int quit_print; |
| extern struct linux_kernel_header *linux_header; |
| |
| /* If not using config file, this variable is set to zero, |
| otherwise non-zero. */ |
| extern int use_config_file; |
| #ifdef GRUB_UTIL |
| /* If using the preset menu, this variable is set to non-zero, |
| otherwise zero. */ |
| extern int use_preset_menu; |
| /* If not using curses, this variable is set to zero, otherwise non-zero. */ |
| extern int use_curses; |
| /* The flag for verbose messages. */ |
| extern int verbose; |
| /* The flag for read-only. */ |
| extern int read_only; |
| /* The number of floppies to be probed. */ |
| extern int floppy_disks; |
| /* The map between BIOS drives and UNIX device file names. */ |
| extern char **device_map; |
| /* The filename which stores the information about a device map. */ |
| extern char *device_map_file; |
| /* The array of geometries. */ |
| extern struct geometry *disks; |
| /* Assign DRIVE to a device name DEVICE. */ |
| extern void assign_device_name (int drive, const char *device); |
| #define DEBUG_SLEEP {} |
| #else |
| /* print debug message on startup if the DEBUG_KEY is pressed. */ |
| extern int debug_boot; |
| extern int console_getkey (void); |
| extern unsigned long initrd_start_sector; |
| extern int disable_map_info; |
| extern int map_func (char *arg, int flags); |
| //#define SLEEP {unsigned long i;for (i=0;i<0xFFFFFFFF;i++);} |
| #define DEBUG_SLEEP {if (debug_boot) console_getkey ();} |
| #endif |
| |
| extern void hexdump(unsigned long,char*,int); |
| |
| #ifndef STAGE1_5 |
| /* GUI interface variables. */ |
| # define MAX_FALLBACK_ENTRIES 8 |
| extern int fallback_entries[MAX_FALLBACK_ENTRIES]; |
| extern int fallback_entryno; |
| extern int default_entry; |
| extern int current_entryno; |
| extern const char *preset_menu; |
| |
| |
| /* |
| * graphics menu stuff |
| * |
| * Note: gfx_data and all data referred to in it must lie within a 64k area. |
| */ |
| typedef struct |
| { |
| unsigned ok; /* set while we're in graphics mode */ |
| unsigned mem_start, mem_cur, mem_max; |
| unsigned code_seg; /* code segment of binary graphics code */ |
| unsigned jmp_table[12]; /* link to graphics functions */ |
| unsigned char sys_cfg[32]; /* sys_cfg[0]: identifies boot loader (grub == 2) */ |
| char *cmdline; /* command line returned by gfx_input() */ |
| unsigned cmdline_len; /* length of the above */ |
| char *menu_list; /* list of menu entries, each of fixed length (menu_entry_len) */ |
| char *menu_default_entry; /* the default entry */ |
| unsigned menu_entries; /* number of entries in menu_list */ |
| unsigned menu_entry_len; /* one entry */ |
| char *args_list; /* same structure as menu_list, menu_entries entries */ |
| unsigned args_entry_len; /* one entry */ |
| unsigned timeout; /* in seconds (0: no timeout) */ |
| unsigned mem_file; /* aligned gfx file start */ |
| unsigned mem_align; /* aligned cpio file start */ |
| } __attribute__ ((packed)) gfx_data_v1_t; |
| |
| typedef struct |
| { |
| unsigned ok; /* set while we're in graphics mode */ |
| unsigned code_seg; /* code segment of binary graphics code */ |
| unsigned jmp_table[12]; /* link to graphics functions */ |
| unsigned char sys_cfg[52]; /* sys_cfg[0]: identifies boot loader (grub == 2) */ |
| char *cmdline; /* command line returned by gfx_input() */ |
| unsigned cmdline_len; /* length of the above */ |
| char *menu_list; /* list of menu entries, each of fixed length (menu_entry_len) */ |
| char *menu_default_entry; /* the default entry */ |
| unsigned menu_entries; /* number of entries in menu_list */ |
| unsigned menu_entry_len; /* one entry */ |
| char *args_list; /* same structure as menu_list, menu_entries entries */ |
| unsigned args_entry_len; /* one entry */ |
| unsigned timeout; /* in seconds (0: no timeout) */ |
| } __attribute__ ((packed)) gfx_data_v2_t; |
| |
| #ifdef SUPPORT_GFX |
| /* pointer to graphics image data */ |
| extern char graphics_file[64]; |
| extern unsigned long gfx_drive, gfx_partition; |
| |
| int gfx_init_v1(gfx_data_v1_t *gfx_data); |
| int gfx_done_v1(gfx_data_v1_t *gfx_data); |
| int gfx_input_v1(gfx_data_v1_t *gfx_data, int *menu_entry); |
| int gfx_setup_menu_v1(gfx_data_v1_t *gfx_data); |
| |
| int gfx_init_v2(gfx_data_v2_t *gfx_data); |
| int gfx_done_v2(gfx_data_v2_t *gfx_data); |
| int gfx_input_v2(gfx_data_v2_t *gfx_data, int *menu_entry); |
| int gfx_setup_menu_v2(gfx_data_v2_t *gfx_data); |
| #endif |
| |
| /* The constants for password types. */ |
| typedef enum |
| { |
| PASSWORD_PLAIN, |
| PASSWORD_MD5, |
| PASSWORD_UNSUPPORTED |
| } |
| password_t; |
| |
| extern char *password; |
| extern password_t password_type; |
| extern int auth; |
| extern char commands[]; |
| |
| /* For `more'-like feature. */ |
| extern int max_lines; |
| extern int count_lines; |
| extern int use_pager; |
| #endif |
| |
| #ifndef NO_DECOMPRESSION |
| extern int no_decompression; |
| extern int compressed_file; |
| #endif |
| |
| /* instrumentation variables */ |
| extern void (*disk_read_hook) (unsigned long, unsigned long, unsigned long); |
| extern void (*disk_read_func) (unsigned long, unsigned long, unsigned long); |
| |
| #ifndef STAGE1_5 |
| /* The flag for debug mode. */ |
| extern int debug; |
| #endif /* STAGE1_5 */ |
| |
| extern unsigned long current_drive; |
| extern unsigned long current_partition; |
| |
| extern int fsys_type; |
| |
| extern inline unsigned long log2_tmp (unsigned long word); |
| extern void unicode_to_utf8 (unsigned short *filename, unsigned char *utf8, unsigned long n); |
| |
| /* The information for a disk geometry. The CHS information is only for |
| DOS/Partition table compatibility, and the real number of sectors is |
| stored in TOTAL_SECTORS. */ |
| struct geometry |
| { |
| /* The number of cylinders */ |
| unsigned long cylinders; |
| /* The number of heads */ |
| unsigned long heads; |
| /* The number of sectors */ |
| unsigned long sectors; |
| /* The total number of sectors */ |
| unsigned long total_sectors; |
| /* Device sector size */ |
| unsigned long sector_size; |
| /* Flags */ |
| unsigned long flags; |
| }; |
| |
| extern unsigned long long part_start; |
| extern unsigned long long part_length; |
| |
| extern unsigned long current_slice; |
| |
| #ifndef GRUB_UTIL |
| extern unsigned long force_geometry_tune; |
| #endif |
| |
| extern int buf_drive; |
| extern int buf_track; |
| extern struct geometry buf_geom; |
| extern struct geometry tmp_geom; |
| extern struct geometry fd_geom[4]; |
| extern struct geometry hd_geom[8]; |
| |
| /* these are the current file position and maximum file position */ |
| extern unsigned long long filepos; |
| extern unsigned long long filemax; |
| extern unsigned long long filesize; |
| |
| extern unsigned long emu_iso_sector_size_2048; |
| |
| /* |
| * Common BIOS/boot data. |
| */ |
| |
| extern struct multiboot_info mbi; |
| extern unsigned long saved_drive; |
| extern unsigned long saved_partition; |
| extern char saved_dir[256]; |
| extern unsigned long memdisk_raw; /* raw mode as in memdisk */ |
| extern unsigned long a20_keep_on; /* keep a20 on after RAM drive sector access */ |
| extern unsigned long lba_cd_boot; /* LBA of no-emulation boot image, in 2048-byte sectors */ |
| extern unsigned long safe_mbr_hook; /* safe mbr hook flags used by Win9x */ |
| extern unsigned long int13_scheme; /* controls disk access methods in emulation */ |
| extern unsigned char atapi_dev_count; /* ATAPI CDROM DRIVE COUNT */ |
| extern unsigned long *reg_base_addr_append; |
| extern unsigned long init_atapi(void); |
| extern unsigned char min_cdrom_id; /* MINIMUM ATAPI CDROM DRIVE NUMBER */ |
| extern unsigned long cdrom_drive; |
| //extern unsigned long cdrom_drives[]; |
| //#ifndef cdrom_drive |
| //#define cdrom_drive (*cdrom_drives) |
| //#endif |
| extern unsigned long force_cdrom_as_boot_device; |
| extern unsigned long ram_drive; |
| extern unsigned long rd_base; |
| extern unsigned long rd_size; |
| extern unsigned long saved_mem_upper; |
| extern unsigned long saved_mem_lower; |
| extern unsigned long saved_mmap_addr; |
| extern unsigned long saved_mmap_length; |
| #ifndef STAGE1_5 |
| extern unsigned long extended_memory; |
| extern unsigned long init_free_mem_start; |
| extern int config_len; |
| #endif |
| |
| /* |
| * Error variables. |
| */ |
| |
| extern grub_error_t errnum; |
| extern char *err_list[]; |
| |
| /* Simplify declaration of entry_addr. */ |
| typedef void (*entry_func) (int, int, int, int, int, int) |
| __attribute__ ((noreturn)); |
| |
| extern entry_func entry_addr; |
| |
| /* Enter the stage1.5/stage2 C code after the stack is set up. */ |
| void cmain (void); |
| |
| /* Halt the processor (called after an unrecoverable error). */ |
| void stop (void) __attribute__ ((noreturn)); |
| |
| /* Reboot the system. */ |
| void grub_reboot (void) __attribute__ ((noreturn)); |
| |
| /* Halt the system, using APM if possible. If NO_APM is true, don't use |
| APM even if it is available. */ |
| void grub_halt (int no_apm) __attribute__ ((noreturn)); |
| |
| struct drive_map_slot |
| { |
| /* Remember to update DRIVE_MAP_SLOT_SIZE once this is modified. |
| * The struct size must be a multiple of 4. |
| */ |
| |
| /* X=max_sector bit 7: read only or fake write */ |
| /* Y=to_sector bit 6: safe boot or fake write */ |
| /* ------------------------------------------- */ |
| /* X Y: meaning of restrictions imposed on map */ |
| /* ------------------------------------------- */ |
| /* 1 1: read only=0, fake write=1, safe boot=0 */ |
| /* 1 0: read only=1, fake write=0, safe boot=0 */ |
| /* 0 1: read only=0, fake write=0, safe boot=1 */ |
| /* 0 0: read only=0, fake write=0, safe boot=0 */ |
| |
| unsigned char from_drive; |
| unsigned char to_drive; /* 0xFF indicates a memdrive */ |
| unsigned char max_head; |
| unsigned char max_sector; /* bit 7: read only */ |
| /* bit 6: disable lba */ |
| |
| unsigned short to_cylinder; /* max cylinder of the TO drive */ |
| /* bit 15: TO drive support LBA */ |
| /* bit 14: TO drive is CDROM(with big 2048-byte sector) */ |
| /* bit 13: FROM drive is CDROM(with big 2048-byte sector) */ |
| |
| unsigned char to_head; /* max head of the TO drive */ |
| unsigned char to_sector; /* max sector of the TO drive */ |
| /* bit 7: in-situ */ |
| /* bit 6: fake-write or safe-boot */ |
| |
| unsigned long start_sector; |
| unsigned long start_sector_hi; /* hi dword of the 64-bit value */ |
| unsigned long sector_count; |
| unsigned long sector_count_hi; /* hi dword of the 64-bit value */ |
| }; |
| |
| extern struct drive_map_slot bios_drive_map[DRIVE_MAP_SIZE + 1]; |
| extern struct drive_map_slot hooked_drive_map[DRIVE_MAP_SIZE + 1]; |
| |
| /* Copy MAP to the drive map and set up int13_handler. */ |
| void set_int13_handler (struct drive_map_slot *map); |
| |
| /* Restore the original int13 handler. */ |
| int unset_int13_handler (int check_status_only); |
| |
| /* Set up int15_handler. */ |
| void set_int15_handler (void); |
| |
| /* Restore the original int15 handler. */ |
| void unset_int15_handler (void); |
| |
| /* Track the int13 handler to probe I/O address space. */ |
| void track_int13 (int drive); |
| |
| /* The key map. */ |
| extern unsigned short bios_key_map[]; |
| extern unsigned short ascii_key_map[]; |
| |
| /* calls for direct boot-loader chaining */ |
| void chain_stage1 (unsigned long segment, unsigned long offset, |
| unsigned long part_table_addr) |
| __attribute__ ((noreturn)); |
| void chain_stage2 (unsigned long segment, unsigned long offset, |
| int second_sector) |
| __attribute__ ((noreturn)); |
| |
| /* do some funky stuff, then boot linux */ |
| void linux_boot (void) __attribute__ ((noreturn)); |
| |
| /* do some funky stuff, then boot bzImage linux */ |
| void big_linux_boot (void) __attribute__ ((noreturn)); |
| |
| /* booting a multiboot executable */ |
| void multi_boot (int start, int mb_info) __attribute__ ((noreturn)); |
| |
| /* If LINEAR is nonzero, then set the Intel processor to linear mode. |
| Otherwise, bit 20 of all memory accesses is always forced to zero, |
| causing a wraparound effect for bugwards compatibility with the |
| 8086 CPU. Return 0 for failure and 1 for success. */ |
| int gateA20 (int linear); |
| |
| /* memory probe routines */ |
| int get_memsize (int type); |
| int get_eisamemsize (void); |
| |
| /* Fetch the next entry in the memory map and return the continuation |
| value. DESC is a pointer to the descriptor buffer, and CONT is the |
| previous continuation value (0 to get the first entry in the |
| map). */ |
| int get_mmap_entry (struct mmar_desc *desc, int cont); |
| |
| /* Get the linear address of a ROM configuration table. Return zero, |
| if fails. */ |
| unsigned long get_rom_config_table (void); |
| |
| /* Get APM BIOS information. */ |
| //void get_apm_info (void); |
| |
| /* Get VBE controller information. */ |
| int get_vbe_controller_info (struct vbe_controller *controller); |
| |
| /* Get VBE mode information. */ |
| int get_vbe_mode_info (int mode_number, struct vbe_mode *mode); |
| |
| /* Set VBE mode. */ |
| int set_vbe_mode (int mode_number); |
| |
| /* Return the data area immediately following our code. */ |
| int get_code_end (void); |
| |
| /* low-level timing info */ |
| int getrtsecs (void); |
| |
| /* Get current date and time */ |
| void get_datetime(unsigned long *date, unsigned long *time); |
| |
| #ifdef GRUB_UTIL |
| int currticks (void); |
| #else |
| #define currticks() (*(unsigned long *)0x46C) |
| #endif |
| |
| /* Clear the screen. */ |
| void cls (void); |
| |
| /* Turn on/off cursor. */ |
| int setcursor (int on); |
| |
| /* Get the current cursor position (where 0,0 is the top left hand |
| corner of the screen). Returns packed values, (RET >> 8) is x, |
| (RET & 0xff) is y. */ |
| int getxy (void); |
| |
| /* Set the cursor position. */ |
| void gotoxy (int x, int y); |
| |
| /* Displays an ASCII character. IBM displays will translate some |
| characters to special graphical ones (see the DISP_* constants). */ |
| void grub_putchar (int c); |
| |
| /* Wait for a keypress, and return its packed BIOS/ASCII key code. |
| Use ASCII_CHAR(ret) to extract the ASCII code. */ |
| int getkey (void); |
| |
| /* Like GETKEY, but doesn't block, and returns -1 if no keystroke is |
| available. */ |
| int checkkey (void); |
| |
| /* Low-level disk I/O */ |
| extern int biosdisk_int13_extensions (int ax, int drive, void *dap); |
| int get_cdinfo (int drive, struct geometry *geometry); |
| int get_diskinfo (int drive, struct geometry *geometry); |
| int biosdisk (int subfunc, int drive, struct geometry *geometry, |
| int sector, int nsec, int segment); |
| void stop_floppy (void); |
| |
| /* Command-line interface functions. */ |
| #ifndef STAGE1_5 |
| |
| /* The flags for the builtins. */ |
| #define BUILTIN_CMDLINE 0x1 /* Run in the command-line. */ |
| #define BUILTIN_MENU 0x2 /* Run in the menu. */ |
| #define BUILTIN_TITLE 0x4 /* Only for the command title. */ |
| #define BUILTIN_SCRIPT 0x8 /* Run in the script. */ |
| #define BUILTIN_NO_ECHO 0x10 /* Don't print command on booting. */ |
| #define BUILTIN_HELP_LIST 0x20 /* Show help in listing. */ |
| #define BUILTIN_BOOTING 0x40 /* The command is boot-sensitive. */ |
| |
| /* The table for a builtin. */ |
| struct builtin |
| { |
| /* The command name. */ |
| char *name; |
| /* The callback function. */ |
| int (*func) (char *, int); |
| /* The combination of the flags defined above. */ |
| int flags; |
| /* The short version of the documentation. */ |
| char *short_doc; |
| /* The long version of the documentation. */ |
| char *long_doc; |
| }; |
| |
| /* All the builtins are registered in this. */ |
| extern struct builtin *builtin_table[]; |
| |
| /* The constants for kernel types. */ |
| typedef enum |
| { |
| KERNEL_TYPE_NONE, /* None is loaded. */ |
| KERNEL_TYPE_MULTIBOOT, /* Multiboot. */ |
| KERNEL_TYPE_LINUX, /* Linux. */ |
| KERNEL_TYPE_BIG_LINUX, /* Big Linux. */ |
| KERNEL_TYPE_FREEBSD, /* FreeBSD. */ |
| KERNEL_TYPE_NETBSD, /* NetBSD. */ |
| KERNEL_TYPE_CHAINLOADER, /* Chainloader. */ |
| KERNEL_TYPE_CDROM |
| } |
| kernel_t; |
| |
| extern kernel_t kernel_type; |
| extern int show_menu; |
| extern int silent_hiddenmenu; |
| #if !defined(STAGE1_5) && !defined(GRUB_UTIL) |
| extern char *mbr; |
| #endif |
| extern int grub_timeout; |
| |
| char *skip_to (int after_equal, char *cmdline); |
| struct builtin *find_command (char *command); |
| void print_cmdline_message (int forever); |
| void enter_cmdline (char *heap, int forever); |
| #endif |
| |
| /* C library replacement functions with identical semantics. */ |
| //void grub_printf (const char *format,...); |
| #define grub_printf(...) grub_sprintf(NULL, __VA_ARGS__) |
| int grub_sprintf (char *buffer, const char *format, ...); |
| int grub_tolower (int c); |
| int grub_isspace (int c); |
| int grub_strncat (char *s1, const char *s2, int n); |
| void *grub_memcpy (void *to, const void *from, unsigned int n); |
| void *grub_memmove (void *to, const void *from, int len); |
| void *grub_memset (void *start, int c, int len); |
| int grub_strncat (char *s1, const char *s2, int n); |
| char *grub_strstr (const char *s1, const char *s2); |
| int grub_memcmp (const char *s1, const char *s2, int n); |
| int grub_strcmp (const char *s1, const char *s2); |
| int grub_strlen (const char *str); |
| char *grub_strcpy (char *dest, const char *src); |
| |
| #ifndef GRUB_UTIL |
| typedef unsigned long grub_jmp_buf[6]; |
| #else |
| /* In the grub shell, use the libc jmp_buf instead. */ |
| # include <setjmp.h> |
| # define grub_jmp_buf jmp_buf |
| #endif |
| |
| #ifdef GRUB_UTIL |
| # define grub_setjmp setjmp |
| # define grub_longjmp longjmp |
| #else /* ! GRUB_UTIL */ |
| int grub_setjmp (grub_jmp_buf env); |
| void grub_longjmp (grub_jmp_buf env, int val); |
| extern unsigned long configfile_opened; |
| #endif /* ! GRUB_UTIL */ |
| |
| /* The environment for restarting Stage 2. */ |
| extern grub_jmp_buf restart_env; |
| /* The environment for restarting the command-line interface. */ |
| //extern grub_jmp_buf restart_cmdline_env; |
| |
| /* misc */ |
| void init_page (void); |
| void print_error (void); |
| char *convert_to_ascii (char *buf, int c, ...); |
| extern char *prompt; |
| extern int maxlen; |
| extern int echo_char; |
| extern int readline; |
| int get_cmdline (char *cmdline); |
| int substring (const char *s1, const char *s2, int case_insensitive); |
| int nul_terminate (char *str); |
| int get_based_digit (int c, int base); |
| int safe_parse_maxint (char **str_ptr, int *myint_ptr); |
| int parse_string (char *arg); |
| int memcheck (unsigned long start, unsigned long len); |
| void grub_putstr (const char *str); |
| |
| #ifndef NO_DECOMPRESSION |
| /* Compression support. */ |
| int gunzip_test_header (void); |
| unsigned long gunzip_read (char *buf, unsigned long len); |
| #endif /* NO_DECOMPRESSION */ |
| |
| int rawread (unsigned long drive, unsigned long sector, unsigned long byte_offset, unsigned long byte_len, char *buf, unsigned long write); |
| int devread (unsigned long sector, unsigned long byte_offset, unsigned long byte_len, char *buf, unsigned long write); |
| int rawwrite (unsigned long drive, unsigned long sector, char *buf); |
| int devwrite (unsigned long sector, unsigned long sector_len, char *buf); |
| |
| /* Parse a device string and initialize the global parameters. */ |
| char *set_device (char *device); |
| int open_device (void); |
| //char *setup_part (char *filename); |
| int real_open_partition (int flags); |
| int open_partition (void); |
| int next_partition (void); |
| //int next_partition (unsigned long drive, unsigned long dest, |
| // unsigned long *partition, int *type, |
| // unsigned long *start, unsigned long *len, |
| // unsigned long *offset, int *entry, |
| // unsigned long *ext_offset, char *buf); |
| |
| /* Sets device to the one represented by the SAVED_* parameters. */ |
| //int make_saved_active (int status_only); |
| |
| /* Set or clear the current root partition's hidden flag. */ |
| //int set_partition_hidden_flag (int hidden); |
| |
| /* Open a file or directory on the active device, using GRUB's |
| internal filesystem support. */ |
| int grub_open (char *filename); |
| |
| /* Read LEN bytes into BUF from the file that was opened with |
| GRUB_OPEN. If LEN is -1, read all the remaining data in the file. */ |
| unsigned long grub_read (char *buf, unsigned long len, unsigned long write); |
| |
| /* Reposition a file offset. */ |
| unsigned long grub_seek (unsigned long offset); |
| |
| /* Close a file. */ |
| void grub_close (void); |
| |
| /* List the contents of the directory that was opened with GRUB_OPEN, |
| printing all completions. */ |
| //int dir (char *dirname); |
| |
| int set_bootdev (int hdbias); |
| |
| /* Display statistics on the current active device. */ |
| void print_fsys_type (void); |
| |
| /* Display device and filename completions. */ |
| void print_a_completion (char *filename); |
| int print_completions (int is_filename, int is_completion); |
| |
| /* Copies the current partition data to the desired address. */ |
| void copy_current_part_entry (char *buf); |
| |
| #ifndef STAGE1_5 |
| void bsd_boot (kernel_t type, int bootdev, char *arg) |
| __attribute__ ((noreturn)); |
| |
| /* Define flags for load_image here. */ |
| /* Don't pass a Linux's mem option automatically. */ |
| #define KERNEL_LOAD_NO_MEM_OPTION (1 << 0) |
| |
| kernel_t load_image (char *kernel, char *arg, kernel_t suggested_type, |
| unsigned long load_flags); |
| |
| int load_module (char *module, char *arg); |
| int load_initrd (char *initrd); |
| |
| int check_password(char *entered, char* expected, password_t type); |
| #endif |
| |
| void init_bios_info (void); |
| |
| struct master_and_dos_boot_sector { |
| /* 00 */ char dummy1[0x0b]; /* at offset 0, normally there is a short JMP instuction(opcode is 0xEB) */ |
| /* 0B */ unsigned short bytes_per_sector __attribute__ ((packed));/* seems always to be 512, so we just use 512 */ |
| /* 0D */ unsigned char sectors_per_cluster;/* non-zero, the power of 2, i.e., 2^n */ |
| /* 0E */ unsigned short reserved_sectors __attribute__ ((packed));/* FAT=non-zero, NTFS=0? */ |
| /* 10 */ unsigned char number_of_fats;/* NTFS=0; FAT=1 or 2 */ |
| /* 11 */ unsigned short root_dir_entries __attribute__ ((packed));/* FAT32=0, NTFS=0, FAT12/16=non-zero */ |
| /* 13 */ unsigned short total_sectors_short __attribute__ ((packed));/* FAT32=0, NTFS=0, FAT12/16=any */ |
| /* 15 */ unsigned char media_descriptor;/* range from 0xf0 to 0xff */ |
| /* 16 */ unsigned short sectors_per_fat __attribute__ ((packed));/* FAT32=0, NTFS=0, FAT12/16=non-zero */ |
| /* 18 */ unsigned short sectors_per_track __attribute__ ((packed));/* range from 1 to 63 */ |
| /* 1A */ unsigned short total_heads __attribute__ ((packed));/* range from 1 to 256 */ |
| /* 1C */ unsigned long hidden_sectors __attribute__ ((packed));/* any value */ |
| /* 20 */ unsigned long total_sectors_long __attribute__ ((packed));/* FAT32=non-zero, NTFS=0, FAT12/16=any */ |
| /* 24 */ unsigned long sectors_per_fat32 __attribute__ ((packed));/* FAT32=non-zero, NTFS=any, FAT12/16=any */ |
| /* 28 */ unsigned long long total_sectors_long_long __attribute__ ((packed));/* NTFS=non-zero, FAT12/16/32=any */ |
| /* 30 */ char dummy2[0x18e]; |
| |
| /* Partition Table, starting at offset 0x1BE */ |
| /* 1BE */ struct { |
| /* +00 */ unsigned char boot_indicator; |
| /* +01 */ unsigned char start_head; |
| /* +02 */ unsigned short start_sector_cylinder __attribute__ ((packed)); |
| /* +04 */ unsigned char system_indicator; |
| /* +05 */ unsigned char end_head; |
| /* +06 */ unsigned short end_sector_cylinder __attribute__ ((packed)); |
| /* +08 */ unsigned long start_lba __attribute__ ((packed)); |
| /* +0C */ unsigned long total_sectors __attribute__ ((packed)); |
| /* +10 */ |
| } P[4]; |
| /* 1FE */ unsigned short boot_signature __attribute__ ((packed));/* 0xAA55 */ |
| #if 0 |
| /* This starts at offset 0x200 */ |
| /* 200 */ unsigned long probed_total_sectors __attribute__ ((packed)); |
| /* 204 */ unsigned long probed_heads __attribute__ ((packed)); |
| /* 208 */ unsigned long probed_sectors_per_track __attribute__ ((packed)); |
| /* 20C */ unsigned long probed_cylinders __attribute__ ((packed)); |
| /* 210 */ unsigned long sectors_per_cylinder __attribute__ ((packed)); |
| /* 214 */ char dummy3[0x0c] __attribute__ ((packed)); |
| |
| /* matrix of coefficients of linear equations |
| * |
| * C[n] * (H_count * S_count) + H[n] * S_count = LBA[n] - S[n] + 1 |
| * |
| * where n = 1, 2, 3, 4, 5, 6, 7, 8 |
| */ |
| /* This starts at offset 0x130 */ |
| /* 220 */ long long L[9] __attribute__ ((packed)); /* L[n] == LBA[n] - S[n] + 1 */ |
| /* 268 */ long H[9] __attribute__ ((packed)); |
| /* 28C */ short C[9] __attribute__ ((packed)); |
| /* 29E */ short X __attribute__ ((packed)); |
| /* 2A0 */ short Y __attribute__ ((packed)); |
| /* 2A2 */ short Cmax __attribute__ ((packed)); |
| /* 2A4 */ long Hmax __attribute__ ((packed)); |
| /* 2A8 */ unsigned long Z __attribute__ ((packed)); |
| /* 2AC */ short Smax __attribute__ ((packed)); |
| /* 2AE */ |
| #endif |
| }; |
| |
| extern unsigned long probed_total_sectors; |
| extern unsigned long probed_heads; |
| extern unsigned long probed_sectors_per_track; |
| extern unsigned long probed_cylinders; |
| extern unsigned long sectors_per_cylinder; |
| |
| extern int filesystem_type; |
| extern unsigned long bios_id; /* 1 for bochs, 0 for unknown. */ |
| |
| int probe_bpb (struct master_and_dos_boot_sector *BS); |
| int probe_mbr (struct master_and_dos_boot_sector *BS, unsigned long start_sector1, unsigned long sector_count1, unsigned long part_start1); |
| |
| extern int check_int13_extensions (int drive); |
| |
| struct drive_parameters |
| { |
| unsigned short size; |
| unsigned short flags; |
| unsigned long cylinders; |
| unsigned long heads; |
| unsigned long sectors; |
| unsigned long long total_sectors; |
| unsigned short bytes_per_sector; |
| /* ver 2.0 or higher */ |
| unsigned long EDD_configuration_parameters; |
| /* ver 3.0 or higher */ |
| unsigned short signature_dpi; |
| unsigned char length_dpi; |
| unsigned char reserved[3]; |
| unsigned char name_of_host_bus[4]; |
| unsigned char name_of_interface_type[8]; |
| unsigned char interface_path[8]; |
| unsigned char device_path[8]; |
| unsigned char reserved2; |
| unsigned char checksum; |
| |
| /* XXX: This is necessary, because the BIOS of Thinkpad X20 |
| writes a garbage to the tail of drive parameters, |
| regardless of a size specified in a caller. */ |
| unsigned char dummy[16]; |
| } __attribute__ ((packed)); |
| |
| int check_64bit (void); |
| extern int is64bit; |
| extern int errorcheck; |
| extern unsigned long pxe_restart_config; |
| |
| extern unsigned long saved_pxe_ip; |
| extern unsigned char saved_pxe_mac[6]; |
| |
| #ifdef FSYS_PXE |
| |
| #include "pxe.h" |
| extern UINT8 pxe_mac_len, pxe_mac_type; |
| extern MAC_ADDR pxe_mac; |
| extern IP4 pxe_yip, pxe_sip, pxe_gip; |
| extern unsigned long pxe_keep; |
| extern BOOTPLAYER *discover_reply; |
| extern unsigned short pxe_basemem, pxe_freemem; |
| extern unsigned long pxe_entry; |
| extern unsigned long pxe_inited; |
| extern char* pxe_scan(void); |
| extern int pxe_detect(int, char *); |
| extern void pxe_unload(void); |
| extern int pxe_call(int func,void* data); |
| #if PXE_FAST_READ |
| extern int pxe_fast_read(void* data,int num); |
| #endif |
| int pxe_func(char* arg,int flags); |
| |
| #else /* ! FSYS_PXE */ |
| |
| #define pxe_detect() |
| |
| #endif /* FSYS_PXE */ |
| |
| extern unsigned long fb_status; |
| |
| #endif /* ! ASM_FILE */ |
| |
| #endif /* ! GRUB_SHARED_HEADER */ |