blob: c5c9f6bce3a72b0890cf203105abaa8cfa2f5ff9 [file] [log] [blame] [raw]
/* pdp1_stddev.c: PDP-1 standard devices
Copyright (c) 1993-2008, Robert M. Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
ptr paper tape reader
ptp paper tape punch
tti keyboard
tto teleprinter
21-Dec-06 RMS Added 16-channel sequence break support
29-Oct-03 RMS Added PTR FIODEC-to-ASCII translation (from Phil Budne)
07-Sep-03 RMS Changed ioc to ios
30-Aug-03 RMS Revised PTR to conform to Maintenance Manual;
added deadlock prevention on errors
23-Jul-03 RMS Revised to detect I/O wait hang
25-Apr-03 RMS Revised for extended file support
22-Dec-02 RMS Added break support
29-Nov-02 RMS Fixed output flag initialization (found by Derek Peschel)
21-Nov-02 RMS Changed typewriter to half duplex (found by Derek Peschel)
06-Oct-02 RMS Revised for V2.10
30-May-02 RMS Widened POS to 32b
29-Nov-01 RMS Added read only unit support
07-Sep-01 RMS Moved function prototypes
10-Jun-01 RMS Fixed comment
30-Oct-00 RMS Standardized device naming
Note: PTP timeout must be >10X faster that TTY output timeout for Macro
to work correctly!
*/
#include "pdp1_defs.h"
#define FIODEC_STOP 013 /* stop code */
#define FIODEC_UC 074
#define FIODEC_LC 072
#define UC_V 6 /* upper case */
#define UC (1 << UC_V)
#define BOTH (1 << (UC_V + 1)) /* both cases */
#define CW (1 << (UC_V + 2)) /* char waiting */
#define TT_WIDTH 077
#define UNIT_V_ASCII (UNIT_V_UF + 0) /* ASCII/binary mode */
#define UNIT_ASCII (1 << UNIT_V_ASCII)
#define PTR_LEADER 20 /* ASCII leader chars */
int32 ptr_state = 0;
int32 ptr_wait = 0;
int32 ptr_stopioe = 0;
int32 ptr_uc = 0; /* upper/lower case */
int32 ptr_hold = 0; /* holding buffer */
int32 ptr_leader = PTR_LEADER; /* leader count */
int32 ptr_sbs = 0; /* SBS level */
int32 ptp_stopioe = 0;
int32 ptp_sbs = 0; /* SBS level */
int32 tti_hold = 0; /* tti hold buf */
int32 tti_sbs = 0; /* SBS level */
int32 tty_buf = 0; /* tty buffer */
int32 tty_uc = 0; /* tty uc/lc */
int32 tto_sbs = 0;
extern int32 ios, ioh, cpls, iosta;
extern int32 PF, IO, PC, TA;
extern int32 M[];
int ptr_get_ascii (UNIT *uptr);
t_stat ptr_svc (UNIT *uptr);
t_stat ptp_svc (UNIT *uptr);
t_stat tti_svc (UNIT *uptr);
t_stat tto_svc (UNIT *uptr);
t_stat ptr_reset (DEVICE *dptr);
t_stat ptp_reset (DEVICE *dptr);
t_stat tty_reset (DEVICE *dptr);
t_stat ptr_boot (int32 unitno, DEVICE *dptr);
t_stat ptr_attach (UNIT *uptr, char *cptr);
/* Character translation tables */
int32 fiodec_to_ascii[128] = {
' ', '1', '2', '3', '4', '5', '6', '7', /* lower case */
'8', '9', 0, 0, 0, 0, 0, 0,
'0', '/', 's', 't', 'u', 'v', 'w', 'x',
'y', 'z', 0, ',', 0, 0, '\t', 0,
'@', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
'q', 'r', 0, 0, '-', ')', '\\', '(',
0, 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', '{', '.', '}', '\b', 0, '\r',
' ', '"', '\'', '~', '#', '!', '&', '<', /* upper case */
'>', '^', 0, 0, 0, 0, 0, 0,
'`', '?', 'S', 'T', 'U', 'V', 'W', 'X',
'Y', 'Z', 0, '=', 0, 0, '\t', 0,
'_', 'J', 'K', 'L', 'M', 'N', 'O', 'P',
'Q', 'R', 0, 0, '+', ']', '|', '[',
0, 'A', 'B', 'C', 'D', 'E', 'F', 'G',
'H', 'I', '{', '*', '}', '\b', 0, '\r'
};
int32 ascii_to_fiodec[128] = {
0, 0, 0, 0, 0, 0, 0, 0,
BOTH+075, BOTH+036, 0, 0, 0, BOTH+077, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
BOTH+0, UC+005, UC+001, UC+004, 0, 0, UC+006, UC+002,
057, 055, UC+073, UC+054, 033, 054, 073, 021,
020, 001, 002, 003, 004, 005, 006, 007,
010, 011, 0, 0, UC+007, UC+033, UC+010, UC+021,
040, UC+061, UC+062, UC+063, UC+064, UC+065, UC+066, UC+067,
UC+070, UC+071, UC+041, UC+042, UC+043, UC+044, UC+045, UC+046,
UC+047, UC+050, UC+051, UC+022, UC+023, UC+024, UC+025, UC+026,
UC+027, UC+030, UC+031, UC+057, 056, UC+055, UC+011, UC+040,
UC+020, 061, 062, 063, 064, 065, 066, 067,
070, 071, 041, 042, 043, 044, 045, 046,
047, 050, 051, 022, 023, 024, 025, 026,
027, 030, 031, 0, UC+056, 0, UC+003, BOTH+075
};
/* PTR data structures
ptr_dev PTR device descriptor
ptr_unit PTR unit
ptr_reg PTR register list
*/
UNIT ptr_unit = {
UDATA (&ptr_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_ROABLE, 0),
SERIAL_IN_WAIT
};
REG ptr_reg[] = {
{ ORDATA (BUF, ptr_unit.buf, 18) },
{ FLDATA (UC, ptr_uc, UC_V) },
{ FLDATA (DONE, iosta, IOS_V_PTR) },
{ FLDATA (RPLS, cpls, CPLS_V_PTR) },
{ ORDATA (HOLD, ptr_hold, 9), REG_HRO },
{ ORDATA (STATE, ptr_state, 5), REG_HRO },
{ FLDATA (WAIT, ptr_wait, 0), REG_HRO },
{ DRDATA (POS, ptr_unit.pos, T_ADDR_W), PV_LEFT },
{ DRDATA (TIME, ptr_unit.wait, 24), PV_LEFT },
{ DRDATA (LEADER, ptr_leader, 6), REG_HRO },
{ FLDATA (STOP_IOE, ptr_stopioe, 0) },
{ DRDATA (SBSLVL, ptr_sbs, 4), REG_HRO },
{ NULL }
};
MTAB ptr_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "SBSLVL", "SBSLVL",
&dev_set_sbs, &dev_show_sbs, (void *) &ptr_sbs },
{ UNIT_ASCII, UNIT_ASCII, "ASCII", "ASCII", NULL },
{ UNIT_ASCII, 0, "FIODEC", "FIODEC", NULL },
{ 0 }
};
DEVICE ptr_dev = {
"PTR", &ptr_unit, ptr_reg, ptr_mod,
1, 10, 31, 1, 8, 8,
NULL, NULL, &ptr_reset,
&ptr_boot, &ptr_attach, NULL,
NULL, 0
};
/* PTP data structures
ptp_dev PTP device descriptor
ptp_unit PTP unit
ptp_reg PTP register list
*/
UNIT ptp_unit = {
UDATA (&ptp_svc, UNIT_SEQ+UNIT_ATTABLE, 0), SERIAL_OUT_WAIT
};
REG ptp_reg[] = {
{ ORDATA (BUF, ptp_unit.buf, 8) },
{ FLDATA (DONE, iosta, IOS_V_PTP) },
{ FLDATA (RPLS, cpls, CPLS_V_PTP) },
{ DRDATA (POS, ptp_unit.pos, T_ADDR_W), PV_LEFT },
{ DRDATA (TIME, ptp_unit.wait, 24), PV_LEFT },
{ FLDATA (STOP_IOE, ptp_stopioe, 0) },
{ DRDATA (SBSLVL, ptp_sbs, 4), REG_HRO },
{ NULL }
};
MTAB ptp_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "SBSLVL", "SBSLVL",
&dev_set_sbs, &dev_show_sbs, (void *) &ptp_sbs },
{ 0 }
};
DEVICE ptp_dev = {
"PTP", &ptp_unit, ptp_reg, ptp_mod,
1, 10, 31, 1, 8, 8,
NULL, NULL, &ptp_reset,
NULL, NULL, NULL,
NULL, 0
};
/* TTI data structures
tti_dev TTI device descriptor
tti_unit TTI unit
tti_reg TTI register list
*/
UNIT tti_unit = { UDATA (&tti_svc, 0, 0), KBD_POLL_WAIT };
REG tti_reg[] = {
{ ORDATA (BUF, tty_buf, 6) },
{ FLDATA (UC, tty_uc, UC_V) },
{ ORDATA (HOLD, tti_hold, 9), REG_HRO },
{ FLDATA (DONE, iosta, IOS_V_TTI) },
{ DRDATA (POS, tti_unit.pos, T_ADDR_W), PV_LEFT },
{ DRDATA (TIME, tti_unit.wait, 24), REG_NZ + PV_LEFT },
{ DRDATA (SBSLVL, tti_sbs, 4), REG_HRO },
{ NULL }
};
MTAB tti_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "SBSLVL", "SBSLVL",
&dev_set_sbs, &dev_show_sbs, (void *) &tti_sbs },
{ 0 }
};
DEVICE tti_dev = {
"TTI", &tti_unit, tti_reg, tti_mod,
1, 10, 31, 1, 8, 8,
NULL, NULL, &tty_reset,
NULL, NULL, NULL,
NULL, 0
};
/* TTO data structures
tto_dev TTO device descriptor
tto_unit TTO unit
tto_reg TTO register list
*/
UNIT tto_unit = { UDATA (&tto_svc, 0, 0), SERIAL_OUT_WAIT * 10 };
REG tto_reg[] = {
{ ORDATA (BUF, tty_buf, 6) },
{ FLDATA (UC, tty_uc, UC_V) },
{ FLDATA (RPLS, cpls, CPLS_V_TTO) },
{ FLDATA (DONE, iosta, IOS_V_TTO) },
{ DRDATA (POS, tto_unit.pos, T_ADDR_W), PV_LEFT },
{ DRDATA (TIME, tto_unit.wait, 24), PV_LEFT },
{ DRDATA (SBSLVL, tto_sbs, 4), REG_HRO },
{ NULL }
};
MTAB tto_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "SBSLVL", "SBSLVL",
&dev_set_sbs, &dev_show_sbs, (void *) &tto_sbs },
{ 0 }
};
DEVICE tto_dev = {
"TTO", &tto_unit, tto_reg, tto_mod,
1, 10, 31, 1, 8, 8,
NULL, NULL, &tty_reset,
NULL, NULL, NULL,
NULL, 0
};
/* Paper tape reader: IOT routine. Points to note:
- RPA (but not RPB) complements the reader clutch control. Thus,
if the reader is running, RPA will stop it.
- The status bit indicates data in the reader buffer that has not
been transfered to IO. It is cleared by any RB->IO operation,
including RRB and the completion pulse.
- A reader error on a wait mode operation could hang the simulator.
IOH is set; any retry (without RESET) will be NOP'd. Accordingly,
the PTR service routine clears IOH on any error during a rpa/rpb i.
*/
int32 ptr (int32 inst, int32 dev, int32 dat)
{
if (dev == 0030) { /* RRB */
iosta = iosta & ~IOS_PTR; /* clear status */
return ptr_unit.buf; /* return data */
}
if (dev == 0002) /* RPB, mode = binary */
ptr_state = 18;
else if (sim_is_active (&ptr_unit)) { /* RPA, running? */
sim_cancel (&ptr_unit); /* stop reader */
return dat;
}
else ptr_state = 0; /* mode = alpha */
ptr_unit.buf = 0; /* clear buffer */
if (inst & IO_WAIT) /* set ptr wait */
ptr_wait = 1;
else ptr_wait = 0; /* from IR<5> */
if (GEN_CPLS (inst)) { /* comp pulse? */
ios = 0;
cpls = cpls | CPLS_PTR;
}
else cpls = cpls & ~CPLS_PTR;
sim_activate (&ptr_unit, ptr_unit.wait); /* start reader */
return dat;
}
/* Unit service */
t_stat ptr_svc (UNIT *uptr)
{
int32 temp;
if ((uptr->flags & UNIT_ATT) == 0) { /* attached? */
if (ptr_wait) /* if wait, clr ioh */
ptr_wait = ioh = 0;
if ((cpls & CPLS_PTR) || ptr_stopioe)
return SCPE_UNATT;
return SCPE_OK;
}
if ((uptr->flags & UNIT_ASCII) && (ptr_state == 0)) /* ASCII mode, alpha read? */
temp = ptr_get_ascii (uptr); /* get processed char */
else if ((temp = getc (uptr->fileref)) != EOF) /* no, get raw char */
uptr->pos = uptr->pos + 1; /* if not eof, count */
if (temp == EOF) { /* end of file? */
if (ptr_wait) /* if wait, clr ioh */
ptr_wait = ioh = 0;
if (feof (uptr->fileref)) {
if ((cpls & CPLS_PTR) || ptr_stopioe)
printf ("PTR end of file\n");
else return SCPE_OK;
}
else perror ("PTR I/O error");
clearerr (uptr->fileref);
return SCPE_IOERR;
}
if (ptr_state == 0) /* alpha */
uptr->buf = temp & 0377;
else if (temp & 0200) { /* binary */
ptr_state = ptr_state - 6;
uptr->buf = uptr->buf | ((temp & 077) << ptr_state);
}
if (ptr_state == 0) { /* done? */
if (cpls & CPLS_PTR) { /* completion pulse? */
iosta = iosta & ~IOS_PTR; /* clear flag */
IO = uptr->buf; /* fill IO */
ios = 1; /* restart */
cpls = cpls & ~CPLS_PTR;
}
else { /* no, interrupt */
iosta = iosta | IOS_PTR; /* set flag */
dev_req_int (ptr_sbs); /* req interrupt */
}
}
else sim_activate (uptr, uptr->wait); /* get next char */
return SCPE_OK;
}
/* Read next ASCII character */
int ptr_get_ascii (UNIT *uptr)
{
int c;
int32 in;
if (ptr_leader > 0) { /* leader? */
ptr_leader = ptr_leader - 1; /* count down */
return 0;
}
if (ptr_hold & CW) { /* char waiting? */
in = ptr_hold & TT_WIDTH; /* return char */
ptr_hold = 0; /* not waiting */
}
else {
for (;;) { /* until valid char */
if ((c = getc (uptr->fileref)) == EOF) /* get next char, EOF? */
return FIODEC_STOP; /* return STOP */
uptr->pos = uptr->pos + 1; /* count char */
c = c & 0177; /* cut to 7b */
if (c == '\n') /* NL -> CR */
c = '\r';
else if (c == '\r') /* ignore CR */
continue;
in = ascii_to_fiodec[c]; /* convert char */
if ((in == 0) && (c != ' ')) /* ignore unknowns */
continue;
if ((in & BOTH) || ((in & UC) == ptr_uc)) /* case match? */
in = in & TT_WIDTH; /* cut to 6b */
else { /* no, case shift */
ptr_hold = in | CW; /* set char waiting */
ptr_uc = in & UC; /* set case */
in = ptr_uc? FIODEC_UC: FIODEC_LC; /* return case */
} /* end else */
break;
} /* end for */
} /* end else */
in = in * 010040201; /* even parity from */
in = in | 027555555400; /* HACKMEM 167 */
in = in % (9 << 7);
return in & 0377;
}
/* Reset routine */
t_stat ptr_reset (DEVICE *dptr)
{
ptr_state = 0; /* clear state */
ptr_wait = 0;
ptr_hold = 0;
ptr_uc = 0;
ptr_unit.buf = 0;
cpls = cpls & ~CPLS_PTR;
iosta = iosta & ~IOS_PTR; /* clear flag */
sim_cancel (&ptr_unit); /* deactivate unit */
return SCPE_OK;
}
/* Attach routine */
t_stat ptr_attach (UNIT *uptr, char *cptr)
{
ptr_leader = PTR_LEADER; /* set up leader */
return attach_unit (uptr, cptr);
}
/* Bootstrap routine */
int32 ptr_getw (UNIT *uptr)
{
int32 i, tmp, word;
for (i = word = 0; i < 3;) {
if ((tmp = getc (uptr->fileref)) == EOF)
return -1;
uptr->pos = uptr->pos + 1;
if (tmp & 0200) {
word = (word << 6) | (tmp & 077);
i++;
}
}
return word;
}
t_stat ptr_boot (int32 unitno, DEVICE *dptr)
{
int32 origin, val;
int32 fld = TA & EPCMASK;
for (;;) {
if ((val = ptr_getw (&ptr_unit)) < 0)
return SCPE_FMT;
if (((val & 0760000) == OP_DIO) || /* DIO? */
((val & 0760000) == OP_DAC)) { /* hack - Macro1 err */
origin = val & DAMASK;
if ((val = ptr_getw (&ptr_unit)) < 0)
return SCPE_FMT;
M[fld | origin] = val;
}
else if ((val & 0760000) == OP_JMP) { /* JMP? */
PC = fld | (val & DAMASK);
break;
}
else return SCPE_FMT; /* bad instr */
}
return SCPE_OK; /* done */
}
/* Paper tape punch: IOT routine */
int32 ptp (int32 inst, int32 dev, int32 dat)
{
iosta = iosta & ~IOS_PTP; /* clear flag */
ptp_unit.buf = (dev == 0006)? ((dat >> 12) | 0200): (dat & 0377);
if (GEN_CPLS (inst)) { /* comp pulse? */
ios = 0;
cpls = cpls | CPLS_PTP;
}
else cpls = cpls & ~CPLS_PTP;
sim_activate (&ptp_unit, ptp_unit.wait); /* start unit */
return dat;
}
/* Unit service */
t_stat ptp_svc (UNIT *uptr)
{
if (cpls & CPLS_PTP) { /* completion pulse? */
ios = 1; /* restart */
cpls = cpls & ~CPLS_PTP;
}
iosta = iosta | IOS_PTP; /* set flag */
dev_req_int (ptp_sbs); /* req interrupt */
if ((uptr->flags & UNIT_ATT) == 0) /* not attached? */
return IORETURN (ptp_stopioe, SCPE_UNATT);
if (putc (uptr->buf, uptr->fileref) == EOF) { /* I/O error? */
perror ("PTP I/O error");
clearerr (uptr->fileref);
return SCPE_IOERR;
}
uptr->pos = uptr->pos + 1;
return SCPE_OK;
}
/* Reset routine */
t_stat ptp_reset (DEVICE *dptr)
{
ptp_unit.buf = 0; /* clear state */
cpls = cpls & ~CPLS_PTP;
iosta = iosta & ~IOS_PTP; /* clear flag */
sim_cancel (&ptp_unit); /* deactivate unit */
return SCPE_OK;
}
/* Typewriter IOT routines */
int32 tti (int32 inst, int32 dev, int32 dat)
{
iosta = iosta & ~IOS_TTI; /* clear flag */
if (inst & (IO_WAIT | IO_CPLS)) /* wait or sync? */
return (STOP_RSRV << IOT_V_REASON) | (tty_buf & 077);
return tty_buf & 077;
}
int32 tto (int32 inst, int32 dev, int32 dat)
{
iosta = iosta & ~IOS_TTO; /* clear flag */
tty_buf = dat & TT_WIDTH; /* load buffer */
if (GEN_CPLS (inst)) { /* comp pulse? */
ios = 0;
cpls = cpls | CPLS_TTO;
}
else cpls = cpls & ~CPLS_TTO;
sim_activate (&tto_unit, tto_unit.wait); /* activate unit */
return dat;
}
/* Unit service routines */
t_stat tti_svc (UNIT *uptr)
{
int32 in, temp;
sim_activate (uptr, uptr->wait); /* continue poll */
if (tti_hold & CW) { /* char waiting? */
tty_buf = tti_hold & TT_WIDTH; /* return char */
tti_hold = 0; /* not waiting */
}
else {
if ((temp = sim_poll_kbd ()) < SCPE_KFLAG)
return temp;
if (temp & SCPE_BREAK) /* ignore break */
return SCPE_OK;
temp = temp & 0177;
if (temp == 0177) /* rubout? bs */
temp = '\b';
sim_putchar (temp); /* echo */
if (temp == '\r') /* cr? add nl */
sim_putchar ('\n');
in = ascii_to_fiodec[temp]; /* translate char */
if (in == 0) /* no xlation? */
return SCPE_OK;
if ((in & BOTH) || ((in & UC) == (tty_uc & UC)))
tty_buf = in & TT_WIDTH;
else { /* must shift */
tty_uc = in & UC; /* new case */
tty_buf = tty_uc? FIODEC_UC: FIODEC_LC;
tti_hold = in | CW; /* set 2nd waiting */
}
}
iosta = iosta | IOS_TTI; /* set flag */
dev_req_int (tti_sbs); /* req interrupt */
PF = PF | PF_SS_1; /* set prog flag 1 */
uptr->pos = uptr->pos + 1;
return SCPE_OK;
}
t_stat tto_svc (UNIT *uptr)
{
int32 c;
t_stat r;
if (tty_buf == FIODEC_UC) /* upper case? */
tty_uc = UC;
else if (tty_buf == FIODEC_LC) /* lower case? */
tty_uc = 0;
else {
c = fiodec_to_ascii[tty_buf | tty_uc]; /* translate */
if (c && ((r = sim_putchar_s (c)) != SCPE_OK)) { /* output; error? */
sim_activate (uptr, uptr->wait); /* retry */
return ((r == SCPE_STALL)? SCPE_OK: r);
}
}
if (cpls & CPLS_TTO) { /* completion pulse? */
ios = 1; /* restart */
cpls = cpls & ~CPLS_TTO;
}
iosta = iosta | IOS_TTO; /* set flag */
dev_req_int (tto_sbs); /* req interrupt */
uptr->pos = uptr->pos + 1;
if (c == '\r') { /* cr? add lf */
sim_putchar ('\n');
uptr->pos = uptr->pos + 1;
}
return SCPE_OK;
}
/* Reset routine */
t_stat tty_reset (DEVICE *dptr)
{
tty_buf = 0; /* clear buffer */
tty_uc = 0; /* clear case */
tti_hold = 0; /* clear hold buf */
cpls = cpls & ~CPLS_TTO;
iosta = (iosta & ~IOS_TTI) | IOS_TTO; /* clear flag */
sim_activate (&tti_unit, tti_unit.wait); /* activate keyboard */
sim_cancel (&tto_unit); /* stop printer */
return SCPE_OK;
}