/*************************************************************************************** | |
* Nonstandard serial attachment for remote 2741 terminal (IO selectric) used by APL\1130 | |
* This implementation may be incomplete and/or incorrect | |
***************************************************************************************/ | |
#include "ibm1130_defs.h" | |
#include "sim_sock.h" | |
#include "sim_tmxr.h" | |
#define DEBUG_T2741 | |
static TMLN t2741_ldsc = { 0 }; /* line descr for telnet attachment */ | |
static TMXR t2741_tmxr = { 1, 0, 0, &t2741_ldsc }; /* line mux for telnet attachment */ | |
#define T2741_DSW_TRANSMIT_NOT_READY 0x4000 | |
#define T2741_DSW_READ_RESPONSE 0x1000 | |
#define T2741_DSW_READ_OVERRUN 0x0800 | |
#define T2741_DSW_ATTENTION 0x0010 | |
#define IS_ONLINE(u) (((u)->flags & (UNIT_ATT|UNIT_DIS)) == UNIT_ATT) | |
#define UNIT_V_PHYSICAL_TERM (UNIT_V_UF + 0) /* indicates not telnet but attachment to real terminal */ | |
#define UNIT_V_UPCASE (UNIT_V_UF + 1) /* indicates upshift performed */ | |
#define UNIT_V_SENDING (UNIT_V_UF + 2) /* indicates not telnet but attachment to real terminal */ | |
#define UNIT_V_RECEIVING (UNIT_V_UF + 3) /* indicates not telnet but attachment to real terminal */ | |
#define UNIT_PHYSICAL_TERM (1u << UNIT_V_PHYSICAL_TERM) | |
#define UNIT_UPCASE (1u << UNIT_V_UPCASE) | |
#define UNIT_SENDING (1u << UNIT_V_SENDING) | |
#define UNIT_RECEIVING (1u << UNIT_V_RECEIVING) | |
#define CODE_SHIFTUP 0x1C00 | |
#define CODE_SHIFTDOWN 0x7C00 | |
#define CODE_CIRCLEC 0x1F00 | |
#define CODE_CIRCLED 0x1600 | |
#define CODE_RETURN 0x5B00 | |
#define CODE_LINEFEED 0x3B00 | |
#define CODE_ATTENTION 0x0001 /* pseudocode, never really returned as a received character */ | |
#define CODE_UNKNOWN 0x0000 | |
static t_stat t2741_svc (UNIT *uptr); | |
static t_stat t2741_reset (DEVICE *dptr); | |
static t_stat t2741_attach (UNIT *uptr, char *cptr); | |
static t_stat t2741_detach (UNIT *uptr); | |
static uint16 ascii_to_t2741 (int ascii); | |
static char * t2741_to_ascii (uint16 code); | |
static void set_transmit_notready (void); | |
static uint16 t2741_dsw = T2741_DSW_TRANSMIT_NOT_READY; /* device status word */ | |
static uint32 t2741_swait = 200; /* character send wait */ | |
static uint32 t2741_rwait = 2000; /* character receive wait */ | |
static uint16 t2741_char = 0; /* last character received */ | |
static int overrun = FALSE; | |
static uint32 t2741_socket = 1130; | |
UNIT t2741_unit[1] = { | |
{ UDATA (&t2741_svc, UNIT_ATTABLE, 0) }, | |
}; | |
REG t2741_reg[] = { | |
{ HRDATA (DSW, t2741_dsw, 16) }, /* device status word */ | |
{ DRDATA (RTIME, t2741_rwait, 24), PV_LEFT }, /* character receive wait */ | |
{ DRDATA (STIME, t2741_swait, 24), PV_LEFT }, /* character send wait */ | |
{ DRDATA (SOCKET, t2741_socket,16), PV_LEFT }, /* socket number */ | |
{ HRDATA (LASTCHAR, t2741_char, 16), PV_LEFT }, /* last character read */ | |
{ NULL } }; | |
DEVICE t2741_dev = { | |
"T2741", t2741_unit, t2741_reg, NULL, | |
1, 16, 16, 1, 16, 16, | |
NULL, NULL, t2741_reset, | |
NULL, t2741_attach, t2741_detach}; | |
/* xio_t2741_terminal - XIO command interpreter for the terminal adapter */ | |
void xio_t2741_terminal (int32 iocc_addr, int32 iocc_func, int32 iocc_mod) | |
{ | |
char msg[80]; | |
uint16 code; | |
switch (iocc_func) { | |
case XIO_READ: /* read: return last character read */ | |
code = t2741_char & 0xFF00; | |
M[iocc_addr & mem_mask] = code; | |
overrun = FALSE; | |
#ifdef DEBUG_T2741 | |
/* trace_both("T2741 %04x READ %02x %s", prev_IAR, code >> 8, t2741_to_ascii(code)); */ | |
#endif | |
break; | |
case XIO_WRITE: /* write: initiate character send */ | |
code = M[iocc_addr & mem_mask] & 0xFF00; | |
#ifdef DEBUG_T2741 | |
trace_both("T2741 %04x SEND %02x %s", prev_IAR, code >> 8, t2741_to_ascii(code)); | |
#endif | |
SETBIT(t2741_dsw, T2741_DSW_TRANSMIT_NOT_READY); | |
SETBIT(t2741_unit->flags, UNIT_SENDING); | |
if (code == CODE_SHIFTUP) | |
SETBIT(t2741_unit->flags, UNIT_UPCASE); | |
else if (code == CODE_SHIFTDOWN) | |
CLRBIT(t2741_unit->flags, UNIT_UPCASE); | |
sim_activate(t2741_unit, t2741_swait); /* schedule interrupt */ | |
break; | |
case XIO_SENSE_DEV: /* sense device status */ | |
ACC = t2741_dsw; | |
#ifdef DEBUG_T2741 | |
/* trace_both("T2741 %04x SENS %04x%s", prev_IAR, t2741_dsw, (iocc_mod & 0x01) ? " reset" : ""); */ | |
#endif | |
if (iocc_mod & 0x01) { /* reset interrupts */ | |
CLRBIT(t2741_dsw, T2741_DSW_READ_RESPONSE); | |
CLRBIT(ILSW[4], ILSW_4_T2741_TERMINAL); | |
} | |
break; | |
case XIO_CONTROL: /* control: do something to interface */ | |
#ifdef DEBUG_T2741 | |
trace_both("T2741 %04x CTRL %04x", prev_IAR, iocc_mod &0xFF); | |
#endif | |
SETBIT(t2741_unit->flags, UNIT_RECEIVING); /* set mode to receive mode */ | |
if (IS_ONLINE(t2741_unit) && (t2741_char != 0 || ! feof(t2741_unit->fileref))) { | |
sim_activate(t2741_unit, t2741_rwait); | |
t2741_char = (CODE_CIRCLED >> 8); /* first character received after turnaround is circled */ | |
} | |
break; | |
default: | |
sprintf(msg, "Invalid T2741 XIO function %x", iocc_func); | |
xio_error(msg); | |
} | |
} | |
static void set_transmit_notready (void) | |
{ | |
if (IS_ONLINE(t2741_unit) && ! (t2741_unit->flags & UNIT_SENDING)) | |
CLRBIT(t2741_dsw, T2741_DSW_TRANSMIT_NOT_READY); | |
else | |
SETBIT(t2741_dsw, T2741_DSW_TRANSMIT_NOT_READY); | |
} | |
static t_stat t2741_svc (UNIT *uptr) | |
{ | |
int ch = EOF; | |
uint16 code; | |
if (uptr->flags & UNIT_SENDING) { /* xmit: no interrupt, as far as I know. just clr busy bit */ | |
CLRBIT(uptr->flags, UNIT_SENDING); | |
set_transmit_notready(); | |
} | |
if (uptr->flags & UNIT_RECEIVING) { /* rcv: fire interrupt */ | |
t2741_char <<= 8; | |
if (t2741_char == 0) { /* there is no 2nd character from previous ascii input */ | |
if ((ch = getc(t2741_unit->fileref)) == EOF) | |
t2741_char = 0; | |
else { | |
if (ch == '\r') { /* if we get CR, jump to LF */ | |
if ((ch = getc(t2741_unit->fileref)) != '\n') { | |
ungetc(ch, t2741_unit->fileref); | |
ch = '\r'; | |
} | |
} | |
if (ch == '\027') { | |
t2741_char = CODE_LINEFEED; /* attention key sends line feed character */ | |
#ifdef DEBUG_T2741 | |
trace_both("T2741 ---- ATTENTION"); | |
#endif | |
SETBIT(t2741_dsw, T2741_DSW_ATTENTION); /* no character returned ? */ | |
} | |
else { | |
t2741_char = ascii_to_t2741(ch); /* translate to 2741 code(s) */ | |
} | |
} | |
} | |
code = t2741_char & 0xFF00; | |
if (t2741_char != 0) { | |
if (overrun) /* previous character was not picked up! */ | |
SETBIT(t2741_dsw, T2741_DSW_READ_OVERRUN); | |
SETBIT(t2741_dsw, T2741_DSW_READ_RESPONSE); | |
SETBIT(ILSW[4], ILSW_4_T2741_TERMINAL); /* issue interrupt */ | |
calc_ints(); | |
#ifdef DEBUG_T2741 | |
trace_both("T2741 ---- RCVD %02x '%s' RDRESP%s%s", code >> 8, t2741_to_ascii(code), | |
(t2741_dsw & T2741_DSW_READ_OVERRUN) ? "|OVERRUN" : "", | |
(t2741_dsw & T2741_DSW_ATTENTION) ? "|ATTENTION" : ""); | |
#endif | |
overrun = TRUE; /* arm overrun flag */ | |
} | |
if (t2741_char == CODE_CIRCLEC) /* end of line (CIRCLEC after RETURN) auto downshifts */ | |
CLRBIT(t2741_unit->flags, UNIT_UPCASE); | |
if (t2741_char == 0 || code == CODE_CIRCLEC) | |
CLRBIT(uptr->flags, UNIT_RECEIVING); /* on enter or EOF, stop typing */ | |
else | |
sim_activate(t2741_unit, t2741_rwait); /* schedule next character to arrive */ | |
} | |
return SCPE_OK; | |
} | |
static t_stat t2741_attach (UNIT *uptr, char *cptr) | |
{ | |
int rval; | |
if ((rval = attach_unit(uptr, cptr)) == SCPE_OK) { /* use standard attach */ | |
t2741_char = 0; | |
overrun = FALSE; | |
CLRBIT(t2741_unit->flags, UNIT_UPCASE); | |
if ((t2741_unit->flags & UNIT_RECEIVING) && ! feof(t2741_unit->fileref)) | |
sim_activate(t2741_unit, t2741_rwait); /* schedule interrupt */ | |
} | |
set_transmit_notready(); | |
return rval; | |
} | |
static t_stat t2741_detach (UNIT *uptr) | |
{ | |
t_stat rval; | |
if (t2741_unit->flags & UNIT_RECEIVING) /* if receive was pending, cancel interrupt */ | |
sim_cancel(t2741_unit); | |
t2741_char = 0; | |
overrun = FALSE; | |
rval = detach_unit(uptr); /* use standard detach */ | |
set_transmit_notready(); | |
return rval; | |
} | |
static t_stat t2741_reset (DEVICE *dptr) | |
{ | |
sim_cancel(t2741_unit); | |
CLRBIT(t2741_unit->flags, UNIT_SENDING|UNIT_RECEIVING|UNIT_UPCASE); | |
t2741_char = 0; | |
t2741_dsw = 0; | |
overrun = FALSE; | |
set_transmit_notready(); | |
CLRBIT(ILSW[4], ILSW_4_T2741_TERMINAL); | |
calc_ints(); | |
return SCPE_OK; | |
} | |
static struct tag_t2741_map { | |
int code; | |
int lcase, ucase; | |
t_bool shifts; | |
} t2741_map[] = { | |
{0x4F00, 'A', 'a', TRUE}, | |
{0x3700, 'B', 'b', TRUE}, | |
{0x2F00, 'C', 'c', TRUE}, | |
{0x2A00, 'D', 'd', TRUE}, | |
{0x2900, 'E', 'e', TRUE}, | |
{0x6700, 'F', '_', TRUE}, | |
{0x6200, 'G', 'g', TRUE}, | |
{0x3200, 'H', 'h', TRUE}, | |
{0x4C00, 'I', 'i', TRUE}, | |
{0x6100, 'J', 'j', TRUE}, | |
{0x2C00, 'K', '\'', TRUE}, | |
{0x3100, 'L', 'l', TRUE}, | |
{0x4300, 'M', '|', TRUE}, | |
{0x2500, 'N', 'n', TRUE}, | |
{0x5100, 'O', 'o', TRUE}, | |
{0x6800, 'P', '*', TRUE}, | |
{0x6D00, 'Q', '?', TRUE}, | |
{0x4A00, 'R', 'r', TRUE}, | |
{0x5200, 'S', 's', TRUE}, | |
{0x2000, 'T', '~', TRUE}, | |
{0x2600, 'U', 'u', TRUE}, | |
{0x4600, 'V', 'v', TRUE}, | |
{0x5700, 'W', 'w', TRUE}, | |
{0x2300, 'X', 'x', TRUE}, | |
{0x7300, 'Y', 'y', TRUE}, | |
{0x1500, 'Z', 'z', TRUE}, | |
{0x1300, '0', '&', TRUE}, | |
{0x0200, '1', '?', TRUE}, | |
{0x0400, '2', '?', TRUE}, | |
{0x0700, '3', '<', TRUE}, | |
{0x1000, '4', '?', TRUE}, | |
{0x0800, '5', '=', TRUE}, | |
{0x0D00, '6', '?', TRUE}, | |
{0x0B00, '7', '>', TRUE}, | |
{0x0E00, '8', '?', TRUE}, | |
{0x1600, '9', '|', TRUE}, | |
{0x7000, '/', '\\', TRUE}, | |
{0x7600, '+', '-', TRUE}, | |
{0x6400, '?', '?', TRUE}, | |
{0x4000, '<', '>', TRUE}, | |
{0x6B00, '[', '(', TRUE}, | |
{0x4900, ']', ')', TRUE}, | |
{0x6E00, ',', ';', TRUE}, | |
{0x4500, '.', ':', TRUE}, | |
{0x0100, ' ', 0, FALSE}, | |
{0x5B00, '\r', 0, FALSE}, | |
{0x3B00, '\n', 0, FALSE}, | |
{0x5D00, '\b', 0, FALSE}, | |
{0x5E00, '\t', 0, FALSE}, | |
{0x0001, '\027', 0, FALSE}, | |
}; | |
static uint16 ascii_to_t2741 (int ascii) | |
{ | |
int i; | |
uint16 rval = 0; | |
ascii &= 0xFF; | |
if (ascii == '\n') /* turn newlines into returns + CIRCLED? */ | |
return CODE_RETURN | (CODE_CIRCLEC >> 8); | |
for (i = sizeof(t2741_map)/sizeof(t2741_map[0]); --i >= 0; ) { | |
if (t2741_map[i].shifts) { | |
if (t2741_map[i].lcase == ascii) { | |
rval = t2741_map[i].code; | |
if (t2741_unit->flags & UNIT_UPCASE) { | |
CLRBIT(t2741_unit->flags, UNIT_UPCASE); | |
rval = CODE_SHIFTDOWN | (rval >> 8); | |
} | |
return rval; | |
} | |
if (t2741_map[i].ucase == ascii) { | |
rval = t2741_map[i].code; | |
if (! (t2741_unit->flags & UNIT_UPCASE)) { | |
SETBIT(t2741_unit->flags, UNIT_UPCASE); | |
rval = CODE_SHIFTUP | (rval >> 8); | |
} | |
return rval; | |
} | |
} | |
else if (t2741_map[i].lcase == ascii) | |
return t2741_map[i].code; | |
} | |
return CODE_UNKNOWN; | |
} | |
static char * t2741_to_ascii (uint16 code) | |
{ | |
int i; | |
static char string[2] = {'?', '\0'}; | |
switch (code) { | |
case CODE_SHIFTUP: return "SHIFTUP"; | |
case CODE_SHIFTDOWN: return "SHIFTDN"; | |
case CODE_CIRCLEC: return "CIRCLEC"; | |
case CODE_CIRCLED: return "CIRCLED"; | |
} | |
for (i = sizeof(t2741_map)/sizeof(t2741_map[0]); --i >= 0; ) { | |
if (t2741_map[i].code == code) { | |
if (t2741_map[i].shifts) { | |
string[0] = (t2741_unit->flags & UNIT_UPCASE) ? t2741_map[i].ucase : t2741_map[i].lcase; | |
return string; | |
} | |
switch (t2741_map[i].lcase) { | |
case ' ': return " "; | |
case '\r': return "RETURN"; | |
case '\n': return "LINEFEED"; | |
case '\b': return "BS"; | |
case '\t': return "IDLE"; | |
} | |
break; | |
} | |
} | |
return "?"; | |
} |