| /* id_mt.c: Interdata magnetic tape simulator | |
| Copyright (c) 2001-2008, Robert M Supnik | |
| Permission is hereby granted, free of charge, to any person obtaining a | |
| copy of this software and associated documentation files (the "Software"), | |
| to deal in the Software without restriction, including without limitation | |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| and/or sell copies of the Software, and to permit persons to whom the | |
| Software is furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be included in | |
| all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| Except as contained in this notice, the name of Robert M Supnik shall not be | |
| used in advertising or otherwise to promote the sale, use or other dealings | |
| in this Software without prior written authorization from Robert M Supnik. | |
| mt M46-494 dual density 9-track magtape controller | |
| 16-Feb-06 RMS Added tape capacity checking | |
| 18-Mar-05 RMS Added attached test to detach routine | |
| 07-Dec-04 RMS Added read-only file support | |
| 25-Apr-03 RMS Revised for extended file support | |
| 28-Mar-03 RMS Added multiformat support | |
| 28-Feb-03 RMS Revised for magtape library | |
| 20-Feb-03 RMS Fixed read to stop selch on error | |
| Magnetic tapes are represented as a series of variable 8b records | |
| of the form: | |
| 32b record length in bytes - exact number | |
| byte 0 | |
| byte 1 | |
| : | |
| byte n-2 | |
| byte n-1 | |
| 32b record length in bytes - exact number | |
| If the byte count is odd, the record is padded with an extra byte | |
| of junk. File marks are represented by a single record length of 0. | |
| End of tape is two consecutive end of file marks. | |
| */ | |
| #include "id_defs.h" | |
| #include "sim_tape.h" | |
| #define UST u3 /* unit status */ | |
| #define UCMD u4 /* unit command */ | |
| #define MT_MAXFR (1 << 24) /* max transfer */ | |
| /* Command - in UCMD */ | |
| #define MTC_SPCR 0x11 /* backspace */ | |
| #define MTC_SKFR 0x13 /* space file rev */ | |
| #define MTC_CLR 0x20 /* clear */ | |
| #define MTC_RD 0x21 /* read */ | |
| #define MTC_WR 0x22 /* write */ | |
| #define MTC_SKFF 0x23 /* space file fwd */ | |
| #define MTC_WEOF 0x30 /* write eof */ | |
| #define MTC_REW 0x38 /* rewind */ | |
| #define MTC_MASK 0x3F | |
| #define MTC_STOP1 0x40 /* stop, set EOM */ | |
| #define MTC_STOP2 0x80 /* stop, set NMTN */ | |
| /* Status byte, * = in UST */ | |
| #define STA_ERR 0x80 /* error */ | |
| #define STA_EOF 0x40 /* end of file */ | |
| #define STA_EOT 0x20 /* *end of tape */ | |
| #define STA_NMTN 0x10 /* *no motion */ | |
| #define STA_UFLGS (STA_EOT|STA_NMTN) /* unit flags */ | |
| #define STA_MASK (STA_ERR|STA_EOF|STA_BSY|STA_EOM) | |
| #define SET_EX (STA_ERR|STA_EOF|STA_NMTN) | |
| extern uint32 int_req[INTSZ], int_enb[INTSZ]; | |
| uint8 mtxb[MT_MAXFR]; /* xfer buffer */ | |
| uint32 mt_bptr = 0; /* pointer */ | |
| uint32 mt_blnt = 0; /* length */ | |
| uint32 mt_sta = 0; /* status byte */ | |
| uint32 mt_db = 0; /* data buffer */ | |
| uint32 mt_xfr = 0; /* data xfr in prog */ | |
| uint32 mt_arm[MT_NUMDR] = { 0 }; /* intr armed */ | |
| int32 mt_wtime = 10; /* byte latency */ | |
| int32 mt_rtime = 1000; /* record latency */ | |
| int32 mt_stopioe = 1; /* stop on error */ | |
| uint8 mt_tplte[] = { 0, o_MT0, o_MT0*2, o_MT0*3, TPL_END }; | |
| static const uint8 bad_cmd[64] = { | |
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | |
| 1, 0, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | |
| 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | |
| 0, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1 | |
| }; | |
| DEVICE mt_dev; | |
| uint32 mt (uint32 dev, uint32 op, uint32 dat); | |
| t_stat mt_svc (UNIT *uptr); | |
| t_stat mt_reset (DEVICE *dptr); | |
| t_stat mt_attach (UNIT *uptr, char *cptr); | |
| t_stat mt_detach (UNIT *uptr); | |
| t_stat mt_boot (int32 unitno, DEVICE *dptr); | |
| t_stat mt_map_err (UNIT *uptr, t_stat st); | |
| /* MT data structures | |
| mt_dev MT device descriptor | |
| mt_unit MT unit list | |
| mt_reg MT register list | |
| mt_mod MT modifier list | |
| */ | |
| DIB mt_dib = { d_MT, 0, v_MT, mt_tplte, &mt, NULL }; | |
| UNIT mt_unit[] = { | |
| { UDATA (&mt_svc, UNIT_ATTABLE + UNIT_ROABLE + UNIT_DISABLE, 0) }, | |
| { UDATA (&mt_svc, UNIT_ATTABLE + UNIT_ROABLE + UNIT_DISABLE, 0) }, | |
| { UDATA (&mt_svc, UNIT_ATTABLE + UNIT_ROABLE + UNIT_DISABLE, 0) }, | |
| { UDATA (&mt_svc, UNIT_ATTABLE + UNIT_ROABLE + UNIT_DISABLE, 0) } | |
| }; | |
| REG mt_reg[] = { | |
| { HRDATA (STA, mt_sta, 8) }, | |
| { HRDATA (BUF, mt_db, 8) }, | |
| { BRDATA (DBUF, mtxb, 16, 8, MT_MAXFR) }, | |
| { HRDATA (DBPTR, mt_bptr, 16) }, | |
| { HRDATA (DBLNT, mt_blnt, 17), REG_RO }, | |
| { FLDATA (XFR, mt_xfr, 0) }, | |
| { GRDATA (IREQ, int_req[l_MT], 16, MT_NUMDR, i_MT) }, | |
| { GRDATA (IENB, int_enb[l_MT], 16, MT_NUMDR, i_MT) }, | |
| { BRDATA (IARM, mt_arm, 16, 1, MT_NUMDR) }, | |
| { FLDATA (STOP_IOE, mt_stopioe, 0) }, | |
| { DRDATA (WTIME, mt_wtime, 24), PV_LEFT + REG_NZ }, | |
| { DRDATA (RTIME, mt_rtime, 24), PV_LEFT + REG_NZ }, | |
| { URDATA (UST, mt_unit[0].UST, 16, 8, 0, MT_NUMDR, 0) }, | |
| { URDATA (CMD, mt_unit[0].UCMD, 16, 8, 0, MT_NUMDR, 0) }, | |
| { URDATA (POS, mt_unit[0].pos, 10, T_ADDR_W, 0, | |
| MT_NUMDR, PV_LEFT | REG_RO) }, | |
| { HRDATA (DEVNO, mt_dib.dno, 8), REG_HRO }, | |
| { HRDATA (SELCH, mt_dib.sch, 1), REG_HRO }, | |
| { NULL } | |
| }; | |
| MTAB mt_mod[] = { | |
| { MTUF_WLK, 0, "write enabled", "WRITEENABLED", NULL }, | |
| { MTUF_WLK, MTUF_WLK, "write locked", "LOCKED", NULL }, | |
| { MTAB_XTD|MTAB_VUN, 0, "FORMAT", "FORMAT", | |
| &sim_tape_set_fmt, &sim_tape_show_fmt, NULL }, | |
| { MTAB_XTD|MTAB_VUN, 0, "CAPACITY", "CAPACITY", | |
| &sim_tape_set_capac, &sim_tape_show_capac, NULL }, | |
| { MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO", | |
| &set_dev, &show_dev, NULL }, | |
| { MTAB_XTD|MTAB_VDV, 0, "SELCH", "SELCH", | |
| &set_sch, &show_sch, NULL }, | |
| { 0 } | |
| }; | |
| DEVICE mt_dev = { | |
| "MT", mt_unit, mt_reg, mt_mod, | |
| MT_NUMDR, 10, 31, 1, 16, 8, | |
| NULL, NULL, &mt_reset, | |
| &mt_boot, &mt_attach, &mt_detach, | |
| &mt_dib, DEV_DISABLE | |
| }; | |
| /* Magtape: IO routine */ | |
| uint32 mt (uint32 dev, uint32 op, uint32 dat) | |
| { | |
| uint32 i, f, t; | |
| uint32 u = (dev - mt_dib.dno) / o_MT0; | |
| UNIT *uptr = mt_dev.units + u; | |
| switch (op) { /* case IO op */ | |
| case IO_ADR: /* select */ | |
| sch_adr (mt_dib.sch, dev); /* inform sel ch */ | |
| return BY; /* byte only */ | |
| case IO_RD: /* read data */ | |
| if (mt_xfr) /* xfr? set busy */ | |
| mt_sta = mt_sta | STA_BSY; | |
| return mt_db; /* return data */ | |
| case IO_WD: /* write data */ | |
| if (mt_xfr) { /* transfer? */ | |
| mt_sta = mt_sta | STA_BSY; /* set busy */ | |
| if ((uptr->UCMD & (MTC_STOP1 | MTC_STOP2)) && | |
| ((uptr->UCMD & MTC_MASK) == MTC_WR)) /* while stopping? */ | |
| mt_sta = mt_sta | STA_ERR; /* write overrun */ | |
| } | |
| mt_db = dat & DMASK8; /* store data */ | |
| break; | |
| case IO_SS: /* status */ | |
| mt_sta = mt_sta & STA_MASK; /* ctrl status */ | |
| if (uptr->flags & UNIT_ATT) /* attached? */ | |
| t = mt_sta | (uptr->UST & STA_UFLGS); /* yes, unit status */ | |
| else t = mt_sta | STA_DU; /* no, dev unavail */ | |
| if (t & SET_EX) /* test for ex */ | |
| t = t | STA_EX; | |
| return t; | |
| case IO_OC: /* command */ | |
| mt_arm[u] = int_chg (v_MT + u, dat, mt_arm[u]); | |
| f = dat & MTC_MASK; /* get cmd */ | |
| if (f == MTC_CLR) { /* clear? */ | |
| mt_reset (&mt_dev); /* reset world */ | |
| break; | |
| } | |
| if (((uptr->flags & UNIT_ATT) == 0) || /* ignore if unatt */ | |
| bad_cmd[f] || /* or bad cmd */ | |
| (((f == MTC_WR) || (f == MTC_WEOF)) && /* or write */ | |
| sim_tape_wrp (uptr))) /* and protected */ | |
| break; | |
| for (i = 0; i < MT_NUMDR; i++) { /* check other drvs */ | |
| if (sim_is_active (&mt_unit[i]) && /* active? */ | |
| (mt_unit[i].UCMD != MTC_REW)) { /* not rewind? */ | |
| sim_cancel (&mt_unit[i]); /* stop */ | |
| mt_unit[i].UCMD = 0; | |
| } | |
| } | |
| if (sim_is_active (uptr) && /* unit active? */ | |
| !(uptr->UCMD & (MTC_STOP1 | MTC_STOP2))) /* not stopping? */ | |
| break; /* ignore */ | |
| if ((f == MTC_WR) || (f == MTC_REW)) /* write, rew: bsy=0 */ | |
| mt_sta = 0; | |
| else mt_sta = STA_BSY; /* bsy=1,nmtn,eom,err=0 */ | |
| mt_bptr = mt_blnt = 0; /* not yet started */ | |
| if ((f == MTC_RD) || (f == MTC_WR)) /* data xfr? */ | |
| mt_xfr = 1; /* set xfr flag */ | |
| else mt_xfr = 0; | |
| uptr->UCMD = f; /* save cmd */ | |
| uptr->UST = 0; /* clr tape stat */ | |
| sim_activate (uptr, mt_rtime); /* start op */ | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* Unit service | |
| A given operation can generate up to three interrupts | |
| - EOF generates an interrupt when set (read, space, wreof) | |
| BUSY will still be set, EOM and NMTN will be clear | |
| - After operation complete + delay, EOM generates an interrupt | |
| BUSY will be clear, EOM will be set, NMTN will be clear | |
| - After a further delay, NMTN generates an interrupt | |
| BUSY will be clear, EOM and NMTN will be set | |
| Rewind generates an interrupt when NMTN sets | |
| */ | |
| t_stat mt_svc (UNIT *uptr) | |
| { | |
| uint32 i; | |
| int32 u = uptr - mt_dev.units; | |
| uint32 dev = mt_dib.dno + (u * o_MT0); | |
| t_mtrlnt tbc; | |
| t_bool passed_eot; | |
| t_stat st, r = SCPE_OK; | |
| if ((uptr->flags & UNIT_ATT) == 0) { /* not attached? */ | |
| uptr->UCMD = 0; /* clr cmd */ | |
| uptr->UST = 0; /* set status */ | |
| mt_xfr = 0; /* clr op flags */ | |
| mt_sta = STA_ERR | STA_EOM; /* set status */ | |
| if (mt_arm[u]) /* interrupt */ | |
| SET_INT (v_MT + u); | |
| return IORETURN (mt_stopioe, SCPE_UNATT); | |
| } | |
| if (uptr->UCMD & MTC_STOP2) { /* stop, gen NMTN? */ | |
| uptr->UCMD = 0; /* clr cmd */ | |
| uptr->UST = uptr->UST | STA_NMTN; /* set nmtn */ | |
| mt_xfr = 0; /* clr xfr */ | |
| if (mt_arm[u]) /* set intr */ | |
| SET_INT (v_MT + u); | |
| return SCPE_OK; | |
| } | |
| if (uptr->UCMD & MTC_STOP1) { /* stop, gen EOM? */ | |
| uptr->UCMD = uptr->UCMD | MTC_STOP2; /* clr cmd */ | |
| mt_sta = (mt_sta & ~STA_BSY) | STA_EOM; /* clr busy, set eom */ | |
| if (mt_arm[u]) /* set intr */ | |
| SET_INT (v_MT + u); | |
| sim_activate (uptr, mt_rtime); /* schedule */ | |
| return SCPE_OK; | |
| } | |
| passed_eot = sim_tape_eot (uptr); /* passed EOT? */ | |
| switch (uptr->UCMD) { /* case on function */ | |
| case MTC_REW: /* rewind */ | |
| sim_tape_rewind (uptr); /* reposition */ | |
| uptr->UCMD = 0; /* clr cmd */ | |
| uptr->UST = STA_NMTN | STA_EOT; /* update status */ | |
| mt_sta = mt_sta & ~STA_BSY; /* don't set EOM */ | |
| if (mt_arm[u]) /* interrupt */ | |
| SET_INT (v_MT + u); | |
| return SCPE_OK; | |
| /* For read, busy = 1 => buffer empty | |
| For write, busy = 1 => buffer full | |
| For read, data transfers continue for the full length of the | |
| record, or the maximum size of the transfer buffer | |
| For write, data transfers continue until a write is attempted | |
| and the buffer is empty | |
| */ | |
| case MTC_RD: /* read */ | |
| if (mt_blnt == 0) { /* first time? */ | |
| st = sim_tape_rdrecf (uptr, mtxb, &tbc, MT_MAXFR); /* read rec */ | |
| if (st == MTSE_RECE) /* rec in err? */ | |
| mt_sta = mt_sta | STA_ERR; | |
| else if (st != SCPE_OK) { /* other error? */ | |
| r = mt_map_err (uptr, st); /* map error */ | |
| if (sch_actv (mt_dib.sch, dev)) /* if sch, stop */ | |
| sch_stop (mt_dib.sch); | |
| break; | |
| } | |
| mt_blnt = tbc; /* set buf lnt */ | |
| } | |
| if (sch_actv (mt_dib.sch, dev)) { /* sch active? */ | |
| i = sch_wrmem (mt_dib.sch, mtxb, mt_blnt); /* store rec in mem */ | |
| if (sch_actv (mt_dib.sch, dev)) /* sch still active? */ | |
| sch_stop (mt_dib.sch); /* stop chan, long rd */ | |
| else if (i < mt_blnt) /* process entire rec? */ | |
| mt_sta = mt_sta | STA_ERR; /* no, overrun error */ | |
| } | |
| else if (mt_bptr < mt_blnt) { /* no, if !eor */ | |
| if (!(mt_sta & STA_BSY)) /* busy still clr? */ | |
| mt_sta = mt_sta | STA_ERR; /* read overrun */ | |
| mt_db = mtxb[mt_bptr++]; /* get next byte */ | |
| mt_sta = mt_sta & ~STA_BSY; /* !busy = buf full */ | |
| if (mt_arm[u]) /* set intr */ | |
| SET_INT (v_MT + u); | |
| sim_activate (uptr, mt_wtime); /* reschedule */ | |
| return SCPE_OK; | |
| } | |
| break; /* record done */ | |
| case MTC_WR: /* write */ | |
| if (sch_actv (mt_dib.sch, dev)) { /* sch active? */ | |
| mt_bptr = sch_rdmem (mt_dib.sch, mtxb, MT_MAXFR); /* get rec */ | |
| if (sch_actv (mt_dib.sch, dev)) /* not done? */ | |
| sch_stop (mt_dib.sch); /* stop chan */ | |
| } | |
| else if (mt_sta & STA_BSY) { /* no, if !eor */ | |
| if (mt_bptr < MT_MAXFR) /* if room */ | |
| mtxb[mt_bptr++] = mt_db; /* store in buf */ | |
| mt_sta = mt_sta & ~STA_BSY; /* !busy = buf emp */ | |
| if (mt_arm[u]) /* set intr */ | |
| SET_INT (v_MT + u); | |
| sim_activate (uptr, mt_wtime); /* reschedule */ | |
| return SCPE_OK; | |
| } | |
| if (mt_bptr) { /* any chars? */ | |
| if (st = sim_tape_wrrecf (uptr, mtxb, mt_bptr)) /* write, err? */ | |
| r = mt_map_err (uptr, st); /* map error */ | |
| } | |
| break; /* record done */ | |
| case MTC_WEOF: /* write eof */ | |
| if (st = sim_tape_wrtmk (uptr)) /* write tmk, err? */ | |
| r = mt_map_err (uptr, st); /* map error */ | |
| mt_sta = mt_sta | STA_EOF; /* set eof */ | |
| if (mt_arm[u]) /* set intr */ | |
| SET_INT (v_MT + u); | |
| break; | |
| case MTC_SKFF: /* skip file fwd */ | |
| while ((st = sim_tape_sprecf (uptr, &tbc)) == MTSE_OK) ; | |
| if (st == MTSE_TMK) { /* stopped by tmk? */ | |
| mt_sta = mt_sta | STA_EOF; /* set eof */ | |
| if (mt_arm[u]) /* set intr */ | |
| SET_INT (v_MT + u); | |
| } | |
| else r = mt_map_err (uptr, st); /* map error */ | |
| break; | |
| case MTC_SKFR: /* skip file rev */ | |
| while ((st = sim_tape_sprecr (uptr, &tbc)) == MTSE_OK) ; | |
| if (st == MTSE_TMK) { /* stopped by tmk? */ | |
| mt_sta = mt_sta | STA_EOF; /* set eof */ | |
| if (mt_arm[u]) /* set intr */ | |
| SET_INT (v_MT + u); | |
| } | |
| else r = mt_map_err (uptr, st); /* map error */ | |
| break; | |
| case MTC_SPCR: /* backspace */ | |
| if (st = sim_tape_sprecr (uptr, &tbc)) /* skip rec rev, err? */ | |
| r = mt_map_err (uptr, st); /* map error */ | |
| break; | |
| } /* end case */ | |
| if (!passed_eot && sim_tape_eot (uptr)) /* just passed EOT? */ | |
| uptr->UST = uptr->UST | STA_EOT; | |
| uptr->UCMD = uptr->UCMD | MTC_STOP1; /* set stop stage 1 */ | |
| sim_activate (uptr, mt_rtime); /* schedule */ | |
| return r; | |
| } | |
| /* Map tape error status */ | |
| t_stat mt_map_err (UNIT *uptr, t_stat st) | |
| { | |
| int32 u = uptr - mt_dev.units; | |
| switch (st) { | |
| case MTSE_FMT: /* illegal fmt */ | |
| case MTSE_UNATT: /* not attached */ | |
| mt_sta = mt_sta | STA_ERR; | |
| case MTSE_OK: /* no error */ | |
| return SCPE_IERR; | |
| case MTSE_TMK: /* end of file */ | |
| mt_sta = mt_sta | STA_EOF; /* set eof */ | |
| if (mt_arm[u]) /* set intr */ | |
| SET_INT (v_MT + u); | |
| break; | |
| case MTSE_IOERR: /* IO error */ | |
| mt_sta = mt_sta | STA_ERR; /* set err */ | |
| if (mt_stopioe) | |
| return SCPE_IOERR; | |
| break; | |
| case MTSE_INVRL: /* invalid rec lnt */ | |
| mt_sta = mt_sta | STA_ERR; | |
| return SCPE_MTRLNT; | |
| case MTSE_WRP: /* write protect */ | |
| case MTSE_RECE: /* record in error */ | |
| case MTSE_EOM: /* end of medium */ | |
| mt_sta = mt_sta | STA_ERR; /* set err */ | |
| break; | |
| case MTSE_BOT: /* reverse into BOT */ | |
| uptr->UST = uptr->UST | STA_EOT; /* set err */ | |
| break; | |
| } /* end switch */ | |
| return SCPE_OK; | |
| } | |
| /* Reset routine */ | |
| t_stat mt_reset (DEVICE *dptr) | |
| { | |
| uint32 u; | |
| UNIT *uptr; | |
| mt_bptr = mt_blnt = 0; /* clr buf */ | |
| mt_sta = STA_BSY; /* clr flags */ | |
| mt_xfr = 0; /* clr controls */ | |
| for (u = 0; u < MT_NUMDR; u++) { /* loop thru units */ | |
| CLR_INT (v_MT + u); /* clear int */ | |
| CLR_ENB (v_MT + u); /* disable int */ | |
| mt_arm[u] = 0; /* disarm int */ | |
| uptr = mt_dev.units + u; | |
| sim_tape_reset (uptr); /* clear pos flag */ | |
| sim_cancel (uptr); /* cancel activity */ | |
| uptr->UST = (uptr->UST & STA_UFLGS) | STA_NMTN; /* init status */ | |
| uptr->UCMD = 0; /* init cmd */ | |
| } | |
| return SCPE_OK; | |
| } | |
| /* Attach routine */ | |
| t_stat mt_attach (UNIT *uptr, char *cptr) | |
| { | |
| int32 u = uptr - mt_dev.units; | |
| t_stat r; | |
| r = sim_tape_attach (uptr, cptr); | |
| if (r != SCPE_OK) | |
| return r; | |
| uptr->UST = STA_EOT; | |
| if (mt_arm[u]) | |
| SET_INT (v_MT + u); | |
| return r; | |
| } | |
| /* Detach routine */ | |
| t_stat mt_detach (UNIT* uptr) | |
| { | |
| int32 u = uptr - mt_dev.units; | |
| t_stat r; | |
| if (!(uptr->flags & UNIT_ATT)) | |
| return SCPE_OK; | |
| r = sim_tape_detach (uptr); | |
| if (r != SCPE_OK) | |
| return r; | |
| if (mt_arm[u]) | |
| SET_INT (v_MT + u); | |
| uptr->UST = 0; | |
| return SCPE_OK; | |
| } | |
| /* Bootstrap routine */ | |
| #define BOOT_START 0x50 | |
| #define BOOT_LEN (sizeof (boot_rom) / sizeof (uint8)) | |
| static uint8 boot_rom[] = { | |
| 0xD5, 0x00, 0x00, 0xCF, /* ST: AL CF */ | |
| 0x43, 0x00, 0x00, 0x80 /* BR 80 */ | |
| }; | |
| t_stat mt_boot (int32 unitno, DEVICE *dptr) | |
| { | |
| extern uint32 PC, dec_flgs; | |
| extern uint16 decrom[]; | |
| extern DIB sch_dib; | |
| uint32 sch_dev; | |
| if (decrom[0xD5] & dec_flgs) /* AL defined? */ | |
| return SCPE_NOFNC; | |
| sim_tape_rewind (&mt_unit[unitno]); /* rewind */ | |
| sch_dev = sch_dib.dno + mt_dib.sch; /* sch dev # */ | |
| IOWriteBlk (BOOT_START, BOOT_LEN, boot_rom); /* copy boot */ | |
| IOWriteB (AL_DEV, mt_dib.dno + (unitno * o_MT0)); /* set dev no for unit */ | |
| IOWriteB (AL_IOC, 0xA1); /* set dev cmd */ | |
| IOWriteB (AL_SCH, sch_dev); /* set dev no for chan */ | |
| PC = BOOT_START; | |
| return SCPE_OK; | |
| } |