| SIMH/HP 21XX DIAGNOSTICS PERFORMANCE | |
| ==================================== | |
| Last update: 2005-03-22 | |
| The HP 24396 diagnostic suite has been run against the SIMH HP 21xx simulation. | |
| Diagnostic programs were obtained from magnetic tape, HP 24396-13601 Rev. 2040. | |
| For each diagnostic, the recommended standard tests were selected, plus any | |
| available optional tests that broadened the test coverage. | |
| The test system configuration is the default SIMH configuration with these | |
| alterations (except where noted in the individual diagnostic reports): | |
| * All I/O devices are enabled. | |
| * The CPU is configured as a 21MX-E with 128KW of memory. | |
| Detailed diagnostic configuration, operation, and results are given after the | |
| summary table. These may be used to duplicate the diagnostic results. | |
| The results of the diagnostic runs are summarized below: | |
| Date SIMH | |
| DSN Diagnostic Name Code Vers. Result | |
| ------ --------------------------------------- ---- ----- ------------- | |
| 000200 Diagnostic Configurator Pretest 1627 3.2-3 Passed | |
| 101100 Memory Reference Instruction Group 1624 3.2-3 Passed | |
| 101001 Alter-Skip Instruction Group 1431 3.2-3 Passed | |
| 101002 Shift-Rotate Instruction Group 1431 3.2-3 Passed | |
| 102200 Core Memory (2100/16/15/14) 1624 3.3-0 Passed | |
| 102104 Semiconductor Memory (21MX) 1644 3.2-3 Passed | |
| 101004 EAU Instruction Group 1431 3.2-3 Passed | |
| 101207 Floating Point Instruction Group 1551 3.2-3 Passed | |
| 102305 Memory Protect/Parity Error 1705 3.3-0 Partial | |
| 101206 Power Fail/Auto Restart 1635 - No simulation | |
| 141103 I/O Instruction Group 1810 3.2-3 Passed | |
| 143300 General Purpose Register 1813 3.2-3 Passed | |
| 101220 Direct Memory Access 1705 3.2-3 Passed | |
| 101011 Extended Instruction Group (Index) 1432 3.2-3 Passed | |
| 101112 Extended Instruction Group (Word, Byte) 1728 3.2-3 Passed | |
| 101110 2100 Fast FORTRAN Package 1632 3.4-0 Partial | |
| 101213 M/E-Series Fast FORTRAN Package 1 1822 3.4-0 Passed | |
| 101114 M/E-Series Fast FORTRAN Package 2 1632 3.4-0 Passed | |
| 101121 F-Series FPP/SIS/FFP 1926 - No simulation | |
| 102103 Memory Expansion Unit 1830 3.2-3 Passed | |
| 102103 Semiconductor Memory Microcoded 21MX 1644 - No simulation | |
| 103301 Time Base Generator 1830 3.2-3 Passed | |
| 103115 12936 Privileged Interrupt 1643 - No simulation | |
| 103105 12908/12978 WCS 256 Word 1502 - No simulation | |
| 103023 13197 WCS 1024 Word 1640 - No simulation | |
| 103207 12889 Hardwired Serial Interface 1717 - No simulation | |
| 103122 59310 Interface Bus Interface 1728 - No simulation | |
| 103003 12587 Asynchronous Data Set Interface 1553 - No simulation | |
| 103110 12920 Asynchronous Multiplexer (Data) 1805 - Not tested | |
| 103011 12920 Asynchronous Multiplexer (Cntl) 1444 - Not tested | |
| 103012 12621 Synchronous Data Set (Receive) 1532 - No simulation | |
| 103013 12621 Synchronous Data Set (Send) 1532 - No simulation | |
| 103116 12967 Synchronous Interface 1438 - No simulation | |
| 103017 12966 Asynchronous Data Set 1519 - No simulation | |
| 103121 12968 Asynchronous Comm. Interface 1602 - No simulation | |
| 103024 12821 ICD Disc Interface 1928 - No simulation | |
| 105102 2607 Line Printer 1446 3.3-0 Passed | |
| 145103 2613/17/18 Line Printer 1633 - No simulation | |
| 105106 2631 Printer 1913 - No simulation | |
| 105107 2635 Printing Terminal 1913 - No simulation | |
| 105105 2608 Line Printer 2026 - No simulation | |
| 105104 9866 Line Printer 1541 - No simulation | |
| 111104 12732 Flexible Disc Subsystem 1708 - No simulation | |
| 151302 7900/01 Cartridge Disc 1805 3.2-3 Partial | |
| 151403 7905/06/20/25 Disc 1805 3.3-1 Partial | |
| 104117 92900 Terminal Subsystem 1814 - No simulation | |
| 112200 9-Track Magnetic Tape (7970, 13181/3) 2040 3.2-3 Partial | |
| 112102 7/9-Track Magnetic Tape (13184 Interf.) 1629 - No simulation | |
| 010000 Diagnostic Cross Link 1627 - No simulation | |
| 011000 7900/05/20 Disc Initialization 1627 - No simulation | |
| 146200 Paper Tape Reader/Punch 1725 3.2-3 Passed | |
| 107000 Digital Plotter Interface (CALCOMP) 1540 - No simulation | |
| 113100 2892 Card Reader 1537 - No simulation | |
| 113001 2894 Card Reader Punch 1728 - No simulation | |
| 104003 Teleprinter 1509 3.2-3 Partial | |
| 104007 2615 Video Terminal 1347 - No simulation | |
| 103006 12909B PROM Writer 1420 - No simulation | |
| In addition, the following stand-alone diagnostics were run for older devices | |
| not supported by the 24396 suite: | |
| Paper Tape Date SIMH | |
| Part Number DSN Diagnostic Name Code Vers. Result | |
| ----------- ------ --------------------------------------- ---- ----- ---------- | |
| 12984-16001 105101 2767 Diagnostic 1611 3.3-0 Passed | |
| 24203-60001 -- HP2100A Cartridge Disc Memory (2871) A 3.3-0 Partial | |
| 12965-16001 111001 HP2100A Disc File (2883) 1451 3.3-0 Partial | |
| 22682-16017 177777 HP 2100 Fixed Head Disc/Drum (277x) 1612 3.3-0 Passed | |
| 13206-16001 101016 2100 2000/Access Comm. Proc. Firmware 1526 3.2-3 Partial | |
| 13207-16001 101217 21MX 2000/Access Comm. Proc. Firmware 1728 3.2-3 Passed | |
| 20433-????? -- HP 3030 Magnetic Tape Subsystem -- - Not tested | |
| The "SIMH Version" is the version number of the earliest SIMH system that was | |
| tested with the given diagnostic. Earlier versions may or may not work | |
| properly. | |
| The "Result" column indicates the level of success in passing the given | |
| diagnostic: | |
| Term Meaning | |
| ------------- --------------------------------------------------------------- | |
| Passed All of the standard tests relevant to the hardware model passed | |
| without error. Optional "utility" tests, where present, were | |
| not run unless they broadened the test coverage. | |
| Partial One or more of the standard tests relevant to the hardware | |
| model were either excluded or failed as expected, due to known | |
| limitations in the simulation, e.g., the lack of "defective | |
| cylinder" flags in a disc simulation. | |
| Failed One or more of the standard tests relevant to the hardware | |
| model failed unexpectedly. | |
| Not tested The diagnostic has not been run with the device simulation. | |
| No simulation A simulation of the given device does not exist. | |
| See the "Test Notes" associated with each diagnostic report below for details on | |
| subsets, limitations, or errors encountered. | |
| 24396 DIAGNOSTIC SUITE DETAILED EXECUTION AND RESULTS | |
| ===================================================== | |
| Each execution note below presumes that the target diagnostic has been loaded. | |
| For all runs other than the diagnostic configurator pretest, the configurator | |
| was used in automatic mode to load the target diagnostic via its Diagnostic | |
| Serial Number (DSN), as follows: | |
| sim> attach -r MSC0 24396-13601-REV-2040.tape | |
| sim> deposit S 000000 | |
| sim> boot MSC0 | |
| HALT instruction 102077 | |
| sim> deposit A [DSN] | |
| sim> deposit B 000000 | |
| sim> deposit S 113011 | |
| sim> reset | |
| sim> go 100 | |
| For the pretest, only the first three commands above were used to load the | |
| diagnostic configurator. | |
| -------------------------------------------- | |
| DSN 000200 - Diagnostic Configurator Pretest | |
| -------------------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu.c) | |
| CONFIGURATION: sim> deposit S 000011 | |
| sim> reset | |
| sim> go 2 | |
| TEST REPORT: HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| ----------------------------------------------- | |
| DSN 101100 - Memory Reference Instruction Group | |
| ----------------------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu.c) | |
| CONFIGURATION: sim> deposit S 000000 | |
| sim> reset | |
| sim> go 100 | |
| TEST REPORT: HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| ------------------------------------ | |
| DSN 101001 - Alter-Skip Instructions | |
| ------------------------------------ | |
| TESTED DEVICE: CPU (hp2100_cpu.c) | |
| CONFIGURATION: sim> deposit S 000000 | |
| sim> reset | |
| sim> go 100 | |
| TEST REPORT: HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| -------------------------------------- | |
| DSN 101002 - Shift-Rotate Instructions | |
| -------------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu.c) | |
| CONFIGURATION: sim> deposit S 000000 | |
| sim> reset | |
| sim> go 100 | |
| TEST REPORT: HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| ---------------------------------------- | |
| DSN 102200 - Core Memory (2100/16/15/14) | |
| ---------------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu.c) | |
| CONFIGURATION: sim> set CPU 2100 | |
| sim> set CPU 32K | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go 100 | |
| TEST REPORT: HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| --------------------------------- | |
| DSN 102104 - Semiconductor Memory | |
| --------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu.c) | |
| CONFIGURATION: sim> deposit S 001000 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102075 | |
| sim> deposit A 054777 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| TEST NOTES: The standard tests 00-10, plus optional tests 13, 14, and 16 are | |
| executed. | |
| ---------------------------------- | |
| DSN 101004 - EAU Instruction Group | |
| ---------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu.c) | |
| CONFIGURATION: sim> deposit S 000000 | |
| sim> reset | |
| sim> go 100 | |
| TEST REPORT: 2100 SERIES EAU DIAGNOSTIC | |
| END OF PASS 1 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| --------------------------------------------- | |
| DSN 101207 - Floating Point Instruction Group | |
| --------------------------------------------- | |
| TESTED DEVICE: CPU (hp2100_fp.c) | |
| CONFIGURATION: sim> deposit S 000000 | |
| sim> reset | |
| sim> go 100 | |
| TEST REPORT: 2100-21MX FLOATING POINT DIAGNOSTIC | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| ---------------------------------------- | |
| DSN 102305 - Memory Protect/Parity Error | |
| ---------------------------------------- | |
| TESTED DEVICE: MP (hp2100_cpu.c) | |
| CONFIGURATION: sim> set LPS diag | |
| sim> deposit S 140014 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 001000 | |
| sim> reset | |
| sim> go | |
| MEMORY PROTECT-PARITY ERROR DIAGNOSTIC | |
| HALT instruction 102075 | |
| sim> deposit A 035777 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: H061 POWER DOWN COMPUTER | |
| INSTALL JUMPERS PER TABLE 3-5 IN MOD | |
| POWER UP COMPUTER | |
| HALT instruction 102061 | |
| sim> set MP jsbin,intin,sel1out | |
| sim> go | |
| H314 PRESS HALT,PRESET AND RUN WITHIN 30 SECONDS | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> reset | |
| sim> go | |
| PASS 000001 | |
| H062 POWER DOWN COMPUTER | |
| SET JUMPERS TO INITIAL SETTINGS | |
| PER TABLE 3-1 IN MOD | |
| POWER UP COMPUTER | |
| HALT instruction 102062 | |
| sim> set MP jsbout,intout,sel1in | |
| sim> go | |
| HALT instruction 102077 | |
| TEST RESULT: Partially passed. | |
| TEST NOTES: Test 10 is not executed. This test verifies parity error | |
| detection. This feature is not simulated. | |
| ---------------------------------- | |
| DSN 141103 - I/O Instruction Group | |
| ---------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu.c) | |
| CONFIGURATION: sim> set LPS diag | |
| sim> deposit S 000014 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: I-O INSTRUCTION GROUP & CHANNEL OR | |
| EXTENDER DIAGNOSTIC DSN 141103 | |
| H033 SET S-REG TO 125252, PRESS RUN | |
| HALT instruction 102033 | |
| sim> deposit S 125252 | |
| sim> go | |
| H033 SET S-REG TO 052525, PRESS RUN | |
| HALT instruction 102033 | |
| sim> deposit S 052525 | |
| sim> go | |
| H024 PRESS PRESET (EXT&INT),RUN | |
| HALT instruction 102024 | |
| sim> reset | |
| sim> go | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| ------------------------------------- | |
| DSN 143300 - General Purpose Register | |
| ------------------------------------- | |
| TESTED DEVICE: LPS (hp2100_lps.c) | |
| CONFIGURATION: sim> set LPS diag | |
| sim> deposit S 000014 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: GENERAL PURPOSE REGISTER DIAGNOSTIC, DSN 143300 | |
| H024 PRESS PRESET (EXT&INT),RUN | |
| HALT instruction 102024 | |
| sim> reset | |
| sim> go | |
| H025 BASIC I-O COMPLETED | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| --------------------------------- | |
| DSN 101220 - Direct Memory Access | |
| --------------------------------- | |
| TESTED DEVICE: DMA0/DMA1 (hp2100_cpu.c) | |
| CONFIGURATION: sim> set LPS diag | |
| sim> deposit S 000014 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: DMA-DCPC DIAGNOSTIC | |
| H324 PRESS PRESET AND RUN | |
| HALT instruction 107024 | |
| sim> reset | |
| sim> go | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| ----------------------------------------------- | |
| DSN 101011 - Extended Instruction Group (Index) | |
| ----------------------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu1.c) | |
| CONFIGURATION: sim> deposit S 000000 | |
| sim> reset | |
| sim> go 100 | |
| TEST REPORT: EIG (INDEX) DIAGNOSTIC | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| --------------------------------------------------------- | |
| DSN 101112 - Extended Instruction Group (Word, Byte, Bit) | |
| --------------------------------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu1.c) | |
| CONFIGURATION: sim> set LPS diag | |
| sim> deposit S 000014 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: EIG (WORD,BYTE,BIT) DIAGNOSTIC DSN 101112 | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| -------------------------------------- | |
| DSN 101110 - 2100 Fast FORTRAN Package | |
| -------------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu1.c) | |
| CONFIGURATION: sim> set CPU 2100 | |
| sim> set CPU 32K | |
| sim> set CPU FFP | |
| sim> deposit S 000013 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: START 2100A-S FFP DIAGNOSTIC | |
| H030 .GOTO TEST | |
| H050 .ENTR TEST | |
| H060 .ENTP TEST | |
| H100 .SETP TEST | |
| H110 ..MAP TEST | |
| H120 SNGL TEST | |
| H130 DBLE TEST | |
| H140 .XADD TEST | |
| TEST 07 | |
| E142 NOT INTERRUPTIBLE | |
| HALT instruction 106042 | |
| sim> go | |
| H150 .XSUB TEST | |
| H160 .XMPY TEST | |
| TEST 11 | |
| E162 NOT INTERRUPTIBLE | |
| HALT instruction 106062 | |
| sim> go | |
| H200 .XDIV TEST | |
| H210 .DFER TEST | |
| H220 .XFER TEST | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Partially passed. | |
| TEST NOTES: Tests 07 and 11 test the interruptibility of the .XADD and .XMPY | |
| instructions. These features are not simulated. | |
| ---------------------------------------------- | |
| DSN 101213 - M/E-Series Fast FORTRAN Package 1 | |
| ---------------------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu1.c) | |
| CONFIGURATION: sim> set CPU FFP | |
| sim> set LPS diag | |
| sim> deposit S 000014 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: START 21MX FFP DIAGNOSTIC 1 | |
| H110 ..MAP TEST | |
| H120 SNGL TEST | |
| H130 DBLE TEST | |
| H210 .DFER TEST | |
| H220 .XFER TEST | |
| H230 PWR2 TEST | |
| H240 .PACK TEST | |
| H250 FLUN TEST | |
| H260 .XPAK TEST | |
| H300 .XCOM TEST | |
| H310 ..DCM TEST | |
| H320 DDINT TEST | |
| H330 .CFER TEST | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| ---------------------------------------------- | |
| DSN 101115 - M/E-Series Fast FORTRAN Package 2 | |
| ---------------------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu1.c) | |
| CONFIGURATION: sim> set CPU FFP | |
| sim> set LPS diag | |
| sim> deposit S 000014 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: START 21MX FFP DIAGNOSTIC 2 | |
| H030 .GOTO TEST | |
| H050 .ENTR TEST | |
| H060 .ENTP TEST | |
| H100 .SETP TEST | |
| H115 XADD TEST | |
| H125 XSUB TEST | |
| H135 XMPY TEST | |
| H140 .XADD TEST | |
| H150 .XSUB TEST | |
| H160 .XMPY TEST | |
| H200 .XDIV TEST | |
| H215 XDIV TEST | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| ---------------------------------- | |
| DSN 102103 - Memory Expansion Unit | |
| ---------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu.c) | |
| CONFIGURATION: sim> set LPS diag | |
| sim> deposit S 000014 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 001000 | |
| sim> reset | |
| sim> go | |
| MEMORY EXPANSION MODULE DIAGNOSTIC, DSN = 102103 | |
| HALT instruction 102075 | |
| sim> deposit A 177777 | |
| sim> deposit B 000037 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: H115 PRESS HALT-PRESET-RUN IN LESS THAN 10 SECONDS | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> reset | |
| sim> go | |
| H117 PRESET TEST COMPLETE | |
| H327 00128K OF CONTIGUOUS MEMORY INSTALLED | |
| H024 PRESS PRESET, RUN | |
| HALT instruction 102024 | |
| sim> reset | |
| sim> go | |
| H025 BI-O COMP | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| TEST NOTES: The standard tests 00-22 plus optional tests 23 and 24 are | |
| executed. | |
| Test 25 (Register Crusher Test) is not executed. This test is | |
| designed specifically for the RAM chips present on the hardware | |
| and isn't relevant to simulation. | |
| Test 23 cannot be run with more than 256K of memory, or the | |
| diagnostic will be corrupted. There is a fixed-size table in | |
| revision 1830 that overflows if memory size is greater than | |
| 256K. | |
| -------------------------------- | |
| DSN 103301 - Time Base Generator | |
| -------------------------------- | |
| TESTED DEVICE: CLK (hp2100_stddev.c) | |
| CONFIGURATION: sim> set CLK diag | |
| sim> deposit S 100013 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: TBG DIAGNOSTIC, DSN = 103301 | |
| H024 PRESS PRESET (EXT&INT),RUN | |
| HALT instruction 102024 | |
| sim> reset | |
| sim> go | |
| H025 BI-O COMP | |
| H030 TEST 01 IN PROGRESS | |
| H030 TEST 02 IN PROGRESS | |
| H030 TEST 03 IN PROGRESS | |
| H030 TEST 04 IN PROGRESS | |
| H030 TEST 05 IN PROGRESS | |
| H030 TEST 06 IN PROGRESS | |
| H030 TEST 07 IN PROGRESS | |
| H030 TEST 10 IN PROGRESS | |
| H030 TEST 11 IN PROGRESS | |
| H030 TEST 12 IN PROGRESS | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| -------------------------------------------------- | |
| DSN 103110 - 12920 Asynchronous Multiplexer (Data) | |
| -------------------------------------------------- | |
| TESTED DEVICE: MUX, MUXL (hp2100_mux.c) | |
| CONFIGURATION: | |
| TEST REPORT: | |
| TEST RESULT: Not tested. | |
| -------------------------------------------------- | |
| DSN 103011 - 12920 Asynchronous Multiplexer (Cntl) | |
| -------------------------------------------------- | |
| TESTED DEVICE: MUXM (hp2100_mux.c) | |
| CONFIGURATION: | |
| TEST REPORT: | |
| TEST RESULT: Not tested. | |
| ------------------------------ | |
| DSN 105102 - 2607 Line Printer | |
| ------------------------------ | |
| TESTED DEVICE: LPT (hp2100_lpt.c) | |
| CONFIGURATION: sim> attach LPT scratch.2607.printer | |
| sim> deposit S 100015 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 001000 | |
| sim> reset | |
| sim> go | |
| 2607 LINE PRINTER DIAGNOSTIC | |
| HALT instruction 102075 | |
| sim> deposit A 000377 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: H024 PRESS PRESET (EXT&INT),RUN | |
| HALT instruction 102024 | |
| sim> reset | |
| sim> go | |
| H025 BI-O COMP | |
| H040 PWR OFF LP,PRESS RUN | |
| HALT instruction 102040 | |
| sim> set LPT poweroff | |
| sim> go | |
| H041 PWR ON LP,READY LP,PRESS RUN | |
| HALT instruction 102041 | |
| sim> set LPT poweron | |
| sim> go | |
| H042 PRINT SW OFF,PRESS RUN | |
| HALT instruction 102042 | |
| sim> set LPT offline | |
| sim> go | |
| H043 PRINT SW ON,PRESS RUN | |
| HALT instruction 102043 | |
| sim> set LPT online | |
| sim> go | |
| H044 OPEN PLATEN,PRESS RUN | |
| HALT instruction 102044 | |
| sim> set LPT offline | |
| sim> go | |
| H045 CLOSE PLATEN,PRESS RUN | |
| HALT instruction 102045 | |
| sim> set LPT online | |
| sim> go | |
| H046 REMOVE PAPER FROM LP,PRESS RUN | |
| HALT instruction 102046 | |
| sim> detach LPT | |
| sim> go | |
| H047 RESTORE PAPER IN LP, READY LP,PRESS RUN | |
| HALT instruction 102047 | |
| sim> attach LPT scratch.2607.printer | |
| sim> go | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| TEST NOTES: The standard tests 00-07 are executed. Test 08 (operator | |
| design) is selected as a standard test in this diagnostic only | |
| and so is excluded manually. | |
| ---------------------------------------------------------- | |
| DSN 151302 - 7900/01 Cartridge Disc Memory (multiple unit) | |
| ---------------------------------------------------------- | |
| TESTED DEVICE: DP (hp2100_dp.c) | |
| CONFIGURATION: sim> attach DPC0 scratch.U0.7900.disc | |
| sim> attach DPC1 scratch.U1.7900.disc | |
| sim> attach DPC2 scratch.U2.7900.disc | |
| sim> attach DPC3 scratch.U3.7900.disc | |
| sim> deposit S 000022 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000004 | |
| sim> reset | |
| sim> go | |
| H0 7900/7901 CARTRIDGE DISC MEMORY DIAGNOSTIC | |
| H24 CYLINDER TABLE | |
| 000,001,002,004,008,016,032,064,128,202 | |
| H25 WISH TO CHANGE? | |
| NO | |
| H27 PATTERN TABLE | |
| 000000 177777 125252 052525 007417 | |
| 170360 162745 163346 155555 022222 | |
| H25 WISH TO CHANGE? | |
| NO | |
| H62 TYPE A FOR HEADS 0,1;B FOR 2,3;C FOR ALTERNATELY 0,1 THEN 2,3 | |
| C | |
| H23 00020 ERRORS/PASS ALLOWED | |
| H25 WISH TO CHANGE? | |
| NO | |
| H37 UNIT TABLE/ 01 DRIVE(S); 0 | |
| H25 WISH TO CHANGE? | |
| YES | |
| H34 ENTER UNIT NUMBERS(0-3)SEPARATED BY COMMAS | |
| 0,1,2,3 | |
| H37 UNIT TABLE/ 04 DRIVE(S); 0 1 2 3 | |
| H25 WISH TO CHANGE? | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> deposit S 000000 | |
| sim> go | |
| NO | |
| TEST REPORT: H65 LONG PASS 0001,HEADS 0/1,UNIT 00, 0000 ERRORS | |
| H65 LONG PASS 0002,HEADS 0/1,UNIT 01, 0000 ERRORS | |
| H65 LONG PASS 0003,HEADS 0/1,UNIT 02, 0000 ERRORS | |
| H65 LONG PASS 0004,HEADS 0/1,UNIT 03, 0000 ERRORS,MULTI-DRIVE | |
| H65 LONG PASS 0005,HEADS 2/3,UNIT 00, 0000 ERRORS | |
| H65 LONG PASS 0006,HEADS 2/3,UNIT 01, 0000 ERRORS | |
| H65 LONG PASS 0007,HEADS 2/3,UNIT 02, 0000 ERRORS | |
| H65 LONG PASS 0008,HEADS 2/3,UNIT 03, 0000 ERRORS,MULTI-DRIVE | |
| [CTRL+E] | |
| Simulation stopped | |
| TEST RESULT: Passed. | |
| TEST NOTES: Eight passes are required to test all head/unit combinations. | |
| ------------------------------------------------------------- | |
| DSN 151302 - 7900/01 Cartridge Disc Memory (user interaction) | |
| ------------------------------------------------------------- | |
| TESTED DEVICE: DP (hp2100_dp.c) | |
| CONFIGURATION: sim> attach DPC0 scratch.U0.7900.disc | |
| sim> deposit S 000022 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000160 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: H0 7900/7901 CARTRIDGE DISC MEMORY DIAGNOSTIC | |
| H66 SET OVERRIDE SWITCH,PUSH RUN | |
| HALT instruction 102002 | |
| sim> go | |
| H46 READ IN STEP 04 | |
| E64 STATUS IS 000000 SHOULD BE 000010 | |
| H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H22 CYCLIC CHECK IN STEP 04 | |
| E64 STATUS IS 000000 SHOULD BE 000010 | |
| H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0001 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H67 CLEAR OVERRIDE SWITCH,PUSH RUN | |
| HALT instruction 102002 | |
| sim> go | |
| H46 READ IN STEP 07 | |
| E64 STATUS IS 000000 SHOULD BE 000031 | |
| H51 CYL 0001 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H45 WRITE IN STEP 08 | |
| E64 STATUS IS 000000 SHOULD BE 000011 | |
| H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H36 INITIALIZE DATA IN STEP 09 | |
| E64 STATUS IS 000000 SHOULD BE 000011 | |
| H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 6144 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H66 SET OVERRIDE SWITCH,PUSH RUN | |
| HALT instruction 102002 | |
| sim> go | |
| H67 CLEAR OVERRIDE SWITCH,PUSH RUN | |
| HALT instruction 102002 | |
| sim> go | |
| H70 UNLOAD UNIT 0,PUSH RUN | |
| HALT instruction 102002 | |
| sim> set DPC0 unloaded | |
| sim> go | |
| H40 PROTECT U/D THEN READY UNIT 0 | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> set DPC0 locked | |
| sim> set DPC0 loaded | |
| sim> go | |
| H41 CLEAR U/D PROTECT,LOAD,PUSH RUN | |
| HALT instruction 102002 | |
| sim> set DPC0 writeenabled | |
| sim> go | |
| H71 PRESS PRESET(S) THEN PRESS RUN | |
| HALT instruction 102002 | |
| sim> reset | |
| sim> go | |
| H65 SHORT PASS 0001,HEADS 0/1,UNIT 00, 0005 ERRORS | |
| [CTRL+E] | |
| Simulation stopped | |
| TEST RESULT: Partially passed. | |
| TEST NOTES: Steps 4, 7, 8, and 9 test the defective and protected cylinder | |
| bits and the FORMAT switch. These features are not simulated. | |
| ----------------------------------------------- | |
| DSN 151403 - 7905/06/20/25 Disc (multiple unit) | |
| ----------------------------------------------- | |
| TESTED DEVICE: DS (hp2100_ds.c) | |
| CONFIGURATION: sim> set DS0 7905 | |
| sim> set DS1 7906 | |
| sim> set DS2 7920 | |
| sim> set DS3 7925 | |
| sim> set DS4 7905 | |
| sim> set DS5 7906 | |
| sim> set DS6 7920 | |
| sim> set DS7 7925 | |
| sim> attach DS0 scratch.U0.7905.disc | |
| sim> attach DS1 scratch.U1.7906.disc | |
| sim> attach DS2 scratch.U2.7920.disc | |
| sim> attach DS3 scratch.U3.7925.disc | |
| sim> attach DS4 scratch.U4.7905.disc | |
| sim> attach DS5 scratch.U5.7906.disc | |
| sim> attach DS6 scratch.U6.7920.disc | |
| sim> attach DS7 scratch.U7.7925.disc | |
| sim> deposit S 000034 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000004 | |
| sim> reset | |
| sim> go | |
| H0 79XX/13037 DISC MEMORY DIAGNOSTIC | |
| H37 UNIT TABLE: 01 DRIVE(S); 0 | |
| H25 WISH TO CHANGE? | |
| YES | |
| H34 ENTER UNIT NUMBERS(0-7)SEPARATED BY COMMAS | |
| 0,1,2,3,4,5,6,7 | |
| H37 UNIT TABLE: 08 DRIVE(S); 0 1 2 3 4 5 6 7 | |
| H25 WISH TO CHANGE? | |
| NO | |
| ENTER:(U)NIT,(?) ERRS,(H)EAD,(O)UTPUT,(P)ATT,(S)OFT,(C)YL,(M)CPU,(E)XIT | |
| H | |
| H62 HEAD TABLE; UNIT 0 7905A , 02 HEAD(S) 0 1 | |
| H62 HEAD TABLE; UNIT 1 7906A , 02 HEAD(S) 0 1 | |
| H62 HEAD TABLE; UNIT 2 7920A , 05 HEAD(S) 0 1 2 3 4 | |
| H62 HEAD TABLE; UNIT 3 7925A , 09 HEAD(S) 0 1 2 3 4 5 6 7 8 | |
| H62 HEAD TABLE; UNIT 4 7905A , 02 HEAD(S) 0 1 | |
| H62 HEAD TABLE; UNIT 5 7906A , 02 HEAD(S) 0 1 | |
| H62 HEAD TABLE; UNIT 6 7920A , 05 HEAD(S) 0 1 2 3 4 | |
| H62 HEAD TABLE; UNIT 7 7925A , 09 HEAD(S) 0 1 2 3 4 5 6 7 8 | |
| H25 WISH TO CHANGE? | |
| YES | |
| H132 TYPE UNITS YOU WISH TO CHANGE SEPERATED BY COMMAS | |
| 0,1,4,5 | |
| H62 HEAD TABLE; UNIT 0 7905A , 02 HEAD(S) 0 1 | |
| H106 ENTER HEADS SEPARATED BY COMMAS | |
| 0,1,2 | |
| H62 HEAD TABLE; UNIT 0 7905A , 03 HEAD(S) 0 1 2 | |
| H25 WISH TO CHANGE? | |
| NO | |
| H62 HEAD TABLE; UNIT 1 7906A , 02 HEAD(S) 0 1 | |
| H106 ENTER HEADS SEPARATED BY COMMAS | |
| 0,1,2,3 | |
| H62 HEAD TABLE; UNIT 1 7906A , 04 HEAD(S) 0 1 2 3 | |
| H25 WISH TO CHANGE? | |
| NO | |
| H62 HEAD TABLE; UNIT 4 7905A , 02 HEAD(S) 0 1 | |
| H106 ENTER HEADS SEPARATED BY COMMAS | |
| 0,1,2 | |
| H62 HEAD TABLE; UNIT 4 7905A , 03 HEAD(S) 0 1 2 | |
| H25 WISH TO CHANGE? | |
| NO | |
| H62 HEAD TABLE; UNIT 5 7906A , 02 HEAD(S) 0 1 | |
| H106 ENTER HEADS SEPARATED BY COMMAS | |
| 0,1,2,3 | |
| H62 HEAD TABLE; UNIT 5 7906A , 04 HEAD(S) 0 1 2 3 | |
| H25 WISH TO CHANGE? | |
| NO | |
| ENTER:(U)NIT,(?) ERRS,(H)EAD,(O)UTPUT,(P)ATT,(S)OFT,(C)YL,(M)CPU,(E)XIT | |
| E | |
| TEST REPORT: H121 WARNING-FORMAT SWITCH OFF | |
| H65 LONG PASS 0001,HEAD 012 ,UNIT 0,0000 ERRORS-0000 SOFT | |
| H65 LONG PASS 0002,HEAD 0123 ,UNIT 1,0000 ERRORS-0000 SOFT | |
| H65 LONG PASS 0003,HEAD 01234 ,UNIT 2,0000 ERRORS-0000 SOFT | |
| H65 LONG PASS 0004,HEAD 012345678,UNIT 3,0000 ERRORS-0000 SOFT | |
| H65 LONG PASS 0005,HEAD 012 ,UNIT 4,0000 ERRORS-0000 SOFT | |
| H65 LONG PASS 0006,HEAD 0123 ,UNIT 5,0000 ERRORS-0000 SOFT | |
| H65 LONG PASS 0007,HEAD 01234 ,UNIT 6,0000 ERRORS-0000 SOFT | |
| H65 LONG PASS 0008,HEAD 012345678,UNIT 7,0000 ERRORS-0000 SOFT,MULTI-UNIT | |
| [CTRL+E] | |
| Simulation stopped | |
| TEST RESULT: Passed. | |
| TEST NOTES: Eight passes are required to test all head/unit combinations. | |
| -------------------------------------------------- | |
| DSN 151403 - 7905/06/20/25 Disc (user interaction) | |
| -------------------------------------------------- | |
| TESTED DEVICE: DS (hp2100_ds.c) | |
| CONFIGURATION: sim> set DS0 7905 | |
| sim> attach DS0 scratch.U0.7905.disc | |
| sim> deposit S 000034 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000120 | |
| sim> reset | |
| sim> go | |
| H0 79XX/13037 DISC MEMORY DIAGNOSTIC | |
| H37 UNIT TABLE: 01 DRIVE(S); 0 | |
| H25 WISH TO CHANGE? | |
| NO | |
| TEST REPORT: H66 SET FORMAT SWITCH ON UNIT 0,PUSH RUN | |
| HALT instruction 102002 | |
| sim> set DS0 format | |
| sim> go | |
| H46 READ IN STEP 04 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 | |
| SHOULD BE 0 1 0 00000 XXXX XXXX / 0 000010 0 0 0 1 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" | |
| START 0000/00/00-LAST 0000/00/01 WORD COUNT 00128,OLD CYL 0000,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H22 VERIFY IN STEP 04 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 | |
| SHOULD BE 0 1 0 00000 XXXX XXXX / 0 000010 0 0 0 1 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" | |
| START 0000/00/00-LAST 0001/00/00 WORD COUNT 00048,OLD CYL 0000,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H67 CLEAR FORMAT SWITCH ON UNIT 0,PUSH RUN | |
| HALT instruction 102002 | |
| sim> set DS0 noformat | |
| sim> go | |
| H46 READ IN STEP 07 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 0 0 0 0 0 0 | |
| SHOULD BE 0 0 1 10001 XXXX XXXX / 0 000010 0 0 0 0 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "DEFECTIVE TRK " | |
| START 0001/00/00-LAST 0001/00/01 WORD COUNT 00128,OLD CYL 0000,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H45 WRITE IN STEP 08 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 0 0 0 0 0 0 | |
| SHOULD BE 0 1 0 10110 XXXX XXXX / 0 000010 0 0 0 0 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "WRT PROTEC TRK" | |
| START 0000/00/00-LAST 0000/00/01 WORD COUNT 00128,OLD CYL 0001,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H66 SET FORMAT SWITCH ON UNIT 0,PUSH RUN | |
| HALT instruction 102002 | |
| sim> set DS0 format | |
| sim> go | |
| H45 WRITE IN STEP 10 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 | |
| SHOULD BE 0 1 0 00000 XXXX XXXX / 0 000010 0 0 0 1 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" | |
| START 0000/00/00-LAST 0000/00/08 WORD COUNT 01024,OLD CYL 0000,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H70 UNLOAD UNIT 0,PUSH RUN | |
| HALT instruction 102002 | |
| sim> set DS0 unloaded | |
| sim> go | |
| H107 READY UNIT 0 | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> set DS0 loaded | |
| sim> go | |
| H142 PROTECT U/D,PUSH RUN | |
| HALT instruction 102002 | |
| sim> set DS0 locked | |
| sim> go | |
| H143 CLEAR U/D PROTECT,PUSH RUN | |
| HALT instruction 102002 | |
| sim> set DS0 writeenabled | |
| sim> go | |
| H110 PRESS PRESET(S),PRESS RUN | |
| HALT instruction 102002 | |
| sim> reset | |
| sim> go | |
| H46 READ IN STEP 38 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 | |
| SHOULD BE 0 0 0 00111 0000 0000 / 0 000010 0 0 0 X 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "CYL CMP ERROR " | |
| START 0000/00/01-LAST 0000/00/03 WORD COUNT 00138,OLD CYL 0000,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H46 READ IN STEP 39 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 | |
| SHOULD BE 0 0 0 01001 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "HD/SEC CMP ERR" | |
| START 0000/00/01-LAST 0000/00/03 WORD COUNT 00138,OLD CYL 0000,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H46 READ IN STEP 40 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 | |
| SHOULD BE 0 0 0 01001 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "HD/SEC CMP ERR" | |
| START 0000/00/01-LAST 0000/00/03 WORD COUNT 00138,OLD CYL 0000,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H46 READ IN STEP 41 | |
| E47 DATA WORD 0065 IS 075126 SHOULD BE 030400 | |
| E47 DATA WORD 0066 IS 000762 SHOULD BE 030400 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 | |
| SHOULD BE 0 0 0 01111 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "POSS CORR DATA" | |
| START 0000/00/00-LAST 0000/00/03 WORD COUNT 00128,OLD CYL 0000,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H46 READ IN STEP 42 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 | |
| SHOULD BE 0 0 0 01000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "UNCOR DATA ERR" | |
| START 0000/00/00-LAST 0000/00/03 WORD COUNT 00276,OLD CYL 0000,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H22 VERIFY IN STEP 43 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 | |
| SHOULD BE 0 0 1 10001 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "DEFECTIVE TRK " | |
| START 0016/00/00-LAST 0017/00/00 WORD COUNT 00048,OLD CYL 0128,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H22 VERIFY IN STEP 43 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 | |
| SHOULD BE 1 0 0 10000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "SPR TRK ACCESS" | |
| START 0128/01/00-LAST 0129/01/00 WORD COUNT 00048,OLD CYL 0016,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H45 WRITE IN STEP 43 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 | |
| SHOULD BE 1 0 0 00000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" | |
| START 0016/00/33-LAST 0016/00/34 WORD COUNT 00128,OLD CYL 0128,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H46 READ IN STEP 43 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 | |
| SHOULD BE 1 0 0 00000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" | |
| START 0016/00/33-LAST 0016/00/34 WORD COUNT 00128,OLD CYL 0016,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H46 READ IN STEP 43 | |
| E47 DATA WORD 0000 IS 156164 SHOULD BE 144300 | |
| E47 DATA WORD 0001 IS 023302 SHOULD BE 117306 | |
| E47 DATA WORD 0002 IS 114642 SHOULD BE 045322 | |
| H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B | |
| E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 | |
| SHOULD BE 1 0 0 00000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 | |
| H137 TERMINATION STATUS IS "NORMAL COMPLET" | |
| START 0016/00/33-LAST 0016/00/34 WORD COUNT 00128,OLD CYL 0016,UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H65 SHORT PASS 0001,HEAD 01 ,UNIT 0,0015 ERRORS-0015 SOFT | |
| [CTRL+E] | |
| Simulation stopped | |
| TEST RESULT: Partially passed. | |
| TEST NOTES: Steps 4, 8, and 10 test the protected cylinder bit. Step 7 | |
| tests the defective cylinder bit. Steps 38, 39, and 40 test the | |
| Write Full Sector command. Steps 41 and 42 test error | |
| correction. Step 43 tests the spare cylinder bit and track | |
| sparing. These features are not simulated. | |
| ------------------------------------------------- | |
| DSN 112200 - 9-Track Magnetic Tape (7970B, 13181) | |
| ------------------------------------------------- | |
| DEVICE: MS (hp2100_ms.c) | |
| CONFIGURATION: sim> detach MSC0 | |
| sim> set MSC 13181A | |
| sim> set MSC realtime | |
| sim> attach MSC0 scratch.U0.7970.tape | |
| sim> attach MSC1 scratch.U1.7970.tape | |
| sim> attach MSC2 scratch.U2.7970.tape | |
| sim> attach MSC3 scratch.U3.7970.tape | |
| sim> deposit S 102030 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000217 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: 7970-13181 DIAG. | |
| H024 PRESS PRESET (EXT&INT),RUN | |
| HALT instruction 102024 | |
| sim> reset | |
| sim> go | |
| H025 BI-O COMP | |
| H025 FOR DATA CH | |
| H024 PRESS PRESET (EXT&INT),RUN | |
| HALT instruction 102024 | |
| sim> reset | |
| sim> go | |
| H025 BI-O COMP | |
| H025 FOR CMND CH | |
| H154 UNIT 000000 | |
| H034 UNIT ON-LINE | |
| H155 STATUS IS 0 000 000 001 000 000 | |
| H154 UNIT 000001 | |
| H034 UNIT ON-LINE | |
| H155 STATUS IS 0 000 000 001 000 000 | |
| H154 UNIT 000002 | |
| H034 UNIT ON-LINE | |
| H155 STATUS IS 0 000 000 001 000 000 | |
| H154 UNIT 000003 | |
| H034 UNIT ON-LINE | |
| H155 STATUS IS 0 000 000 001 000 000 | |
| H154 UNIT 000000 | |
| H102 RECORD 000117 | |
| H054 COMMAND 000061 | |
| H155 STATUS IS 0 000 000 000 000 000 | |
| H155 AND SHOULD BE 0 000 000 000 000 000 | |
| TEST 23 | |
| E135 LRCC ERROR | |
| HALT instruction 106035 | |
| sim> go | |
| H154 UNIT 000000 | |
| H102 RECORD 000117 | |
| H054 COMMAND 000061 | |
| H155 STATUS IS 0 000 000 000 000 000 | |
| H155 AND SHOULD BE 0 000 000 000 000 000 | |
| E141 CRCC ERROR | |
| HALT instruction 106041 | |
| sim> go | |
| H126 EXCHANGE REELS | |
| HALT instruction 106026 | |
| sim> attach MSC0 scratch.U3.7970.tape | |
| sim> attach MSC1 scratch.U2.7970.tape | |
| sim> attach MSC2 scratch.U1.7970.tape | |
| sim> attach MSC3 scratch.U0.7970.tape | |
| sim> go | |
| H127 SET SW 13 TO LOOP | |
| HALT instruction 106027 | |
| sim> go | |
| H130 REMOVE WRITE RING | |
| HALT instruction 106030 | |
| sim> set MSC0 locked | |
| sim> go | |
| H131 REPLACE WRITE RING | |
| HALT instruction 106031 | |
| sim> set MSC0 writeenabled | |
| sim> go | |
| H137 PUT TAPE UNIT ON-LINE | |
| HALT instruction 106037 | |
| sim> set MSC0 online | |
| sim> go | |
| H137 PUT TAPE UNIT ON-LINE | |
| HALT instruction 106037 | |
| sim> set MSC1 online | |
| sim> go | |
| H137 PUT TAPE UNIT ON-LINE | |
| HALT instruction 106037 | |
| sim> set MSC2 online | |
| sim> go | |
| H137 PUT TAPE UNIT ON-LINE | |
| HALT instruction 106037 | |
| sim> set MSC3 online | |
| sim> go | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Partially passed. | |
| TEST NOTES: Test 23 verifies the LRCC and CRCC values obtained from the | |
| interface. These features are not simulated. (Setting bit 7 of | |
| the S register during configuration eliminates most LRCC/CRCC | |
| checks but does not inhibit test 23.) | |
| If test 34 is selected manually, E065 WRITE ERROR will occur. | |
| This is due to the implementation of the tape simulation | |
| library. Test 34 writes data in a single record until a data | |
| error or EOT occurs (conceivably 20+ megabytes for the largest | |
| reel size at 800 bpi). Because the tape simulation library | |
| writes complete records, the 7970 simulator must use a data | |
| buffer to accumulate the entire record before calling | |
| "sim_tape_wrrecf" to write the record. The simulator uses a | |
| data buffer of 32768 words. When the buffer is full, | |
| parity-error status is returned to the program. | |
| ------------------------------------------------- | |
| DSN 112200 - 9-Track Magnetic Tape (7970E, 13183) | |
| ------------------------------------------------- | |
| DEVICE: MS (hp2100_ms.c) | |
| CONFIGURATION: sim> detach MSC0 | |
| sim> set MSC 13183A | |
| sim> set MSC realtime | |
| sim> attach MSC0 scratch.U0.7970.tape | |
| sim> attach MSC1 scratch.U1.7970.tape | |
| sim> attach MSC2 scratch.U2.7970.tape | |
| sim> attach MSC3 scratch.U3.7970.tape | |
| sim> deposit S 104030 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000017 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: 7970-13183 DIAG. | |
| H024 PRESS PRESET (EXT&INT),RUN | |
| HALT instruction 102024 | |
| sim> reset | |
| sim> go | |
| H025 BI-O COMP | |
| H025 FOR DATA CH | |
| H024 PRESS PRESET (EXT&INT),RUN | |
| HALT instruction 102024 | |
| sim> reset | |
| sim> go | |
| H025 BI-O COMP | |
| H025 FOR CMND CH | |
| H154 UNIT 000000 | |
| H034 UNIT ON-LINE | |
| H155 STATUS IS 1 000 000 001 000 000 | |
| H154 UNIT 000001 | |
| H034 UNIT ON-LINE | |
| H155 STATUS IS 1 010 000 001 000 000 | |
| H154 UNIT 000002 | |
| H034 UNIT ON-LINE | |
| H155 STATUS IS 1 100 000 001 000 000 | |
| H154 UNIT 000003 | |
| H034 UNIT ON-LINE | |
| H155 STATUS IS 1 110 000 001 000 000 | |
| H126 EXCHANGE REELS | |
| HALT instruction 106026 | |
| sim> attach MSC0 scratch.U3.7970.tape | |
| sim> attach MSC1 scratch.U2.7970.tape | |
| sim> attach MSC2 scratch.U1.7970.tape | |
| sim> attach MSC3 scratch.U0.7970.tape | |
| sim> go | |
| H127 SET SW 13 TO LOOP | |
| HALT instruction 106027 | |
| sim> go | |
| H130 REMOVE WRITE RING | |
| HALT instruction 106030 | |
| sim> set MSC0 locked | |
| sim> go | |
| H131 REPLACE WRITE RING | |
| HALT instruction 106031 | |
| sim> set MSC0 writeenabled | |
| sim> go | |
| H137 PUT TAPE UNIT ON-LINE | |
| HALT instruction 106037 | |
| sim> set MSC0 online | |
| sim> go | |
| H137 PUT TAPE UNIT ON-LINE | |
| HALT instruction 106037 | |
| sim> set MSC1 online | |
| sim> go | |
| H137 PUT TAPE UNIT ON-LINE | |
| HALT instruction 106037 | |
| sim> set MSC2 online | |
| sim> go | |
| H137 PUT TAPE UNIT ON-LINE | |
| HALT instruction 106037 | |
| sim> set MSC3 online | |
| sim> go | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| ------------------------------------ | |
| DSN 146200 - Paper Tape Reader/Punch | |
| ------------------------------------ | |
| TESTED DEVICE: PTR and PTP (hp2100_stddev.c) | |
| CONFIGURATION: sim> deposit S 001012 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 001000 | |
| sim> reset | |
| sim> go | |
| PAPER TAPE READER AND PUNCH DIAGNOSTIC DSN 146200 | |
| HALT instruction 102075 | |
| sim> deposit A 000200 | |
| sim> reset | |
| sim> go | |
| H060 TO MAKE LOOP, PUNCH ON AND RUN | |
| HALT instruction 102060 | |
| sim> attach PTP loop.2895.punch | |
| sim> go | |
| PASS 000001 | |
| HALT instruction 102077 | |
| sim> detach PTP | |
| sim> deposit S 001000 | |
| sim> reset | |
| sim> go 2000 | |
| PAPER TAPE READER AND PUNCH DIAGNOSTIC DSN 146200 | |
| HALT instruction 102075 | |
| sim> deposit A 003177 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: H050 BI-O ON PUNCH | |
| H024 PRESS PRESET (EXT&INT),RUN | |
| HALT instruction 102024 | |
| sim> reset | |
| sim> go | |
| H025 BI-O COMP | |
| H055 BI-O ON READER | |
| H024 PRESS PRESET (EXT&INT),RUN | |
| HALT instruction 102024 | |
| sim> reset | |
| sim> go | |
| H025 BI-O COMP | |
| H051 ALL CHARTR COMBINATIONS, PUNCH ONLY | |
| TURN PUNCH ON, PRESS RUN | |
| HALT instruction 102051 | |
| sim> attach PTP scratch.2895.punch | |
| sim> go | |
| H052 ALL CHARTR COMBINATIONS, VERIFY | |
| TEAR TAPE AT PUNCH, PLACE IN READER, PRESS RUN | |
| HALT instruction 102052 | |
| sim> detach PTP | |
| sim> attach PTR scratch.2895.punch | |
| sim> go | |
| H054 PLACE LOOP IN READER-PRESS RUN | |
| TO START READ, SET BIT0 TO 1 | |
| TO EXIT TEST, SET BIT0 TO 0 | |
| HALT instruction 102054 | |
| sim> set PTR diag | |
| sim> attach PTR loop.2895.punch | |
| sim> deposit S 000001 | |
| sim> go | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> deposit S 000000 | |
| sim> go | |
| H054 PLACE LOOP IN READER-PRESS RUN | |
| TO START READ, SET BIT0 TO 1 | |
| TO EXIT TEST, SET BIT0 TO 0 | |
| HALT instruction 102054 | |
| sim> deposit S 000001 | |
| sim> go | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> deposit PTR TIME 100 | |
| sim> deposit PTP TIME 200 | |
| sim> deposit S 000000 | |
| sim> go | |
| H056 TURN PUNCH ON, PRESS RUN. PUNCH ROUTINE | |
| WILL START. LOAD THE TAPE BEING PUNCHED | |
| INTO THE READER. | |
| TO START READ, SET BIT0 TO 1 | |
| TO EXIT, SET BIT0 TO 0 | |
| HALT instruction 102056 | |
| sim> set PTR reader | |
| sim> attach PTR scratch.2895.punch | |
| sim> attach PTP scratch.2895.punch | |
| sim> go | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> deposit S 000001 | |
| sim> go | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> deposit S 000000 | |
| sim> go | |
| H057 TO COMPLETE, TEAR TAPE, PRESS RUN | |
| HALT instruction 102057 | |
| sim> go | |
| H063 READER SPEED TEST. PLACE LOOP IN READER | |
| BIT 5=0 FOR 2748-58, BIT 5=1 FOR 2737. PRESS RUN. | |
| HALT instruction 102063 | |
| sim> set PTR diag | |
| sim> attach PTR loop.2895.punch | |
| sim> deposit PTR TIME 3150 | |
| sim> go | |
| H066 TEST 11 COMPLETE | |
| H100 PUNCH SPEED TEST. | |
| BIT 6=0 FOR 2895 OR BIT 6=1 FOR 2753-PRESS RUN | |
| HALT instruction 106000 | |
| sim> deposit PTP TIME 20790 | |
| sim> go | |
| H103 TEST 12 COMPLETE | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| TEST NOTES: Test 07 is executed to punch a tape loop that is used in tests | |
| 04, 05, and 11. Then the default tests 00-06, plus tests 11 and | |
| 12, are executed. | |
| Test 06 punches and reads the same tape concurrently (the tape | |
| coming out of the punch is then fed into the reader). Under | |
| simulation, it is necessary to delay starting the read until the | |
| punch buffer has been flushed to the disc. Also, this test | |
| depends on the reader being at least twice as fast as the punch, | |
| so the PTR/PTP TIME registers are adjusted accordingly. | |
| Test 11 and test 12 are speed tests, so the PTR and PTP TIMEs | |
| are set for realistic timing. | |
| ------------------------ | |
| DSN 104003 - Teleprinter | |
| ------------------------ | |
| TESTED DEVICE: TTY (hp2100_stddev.c) | |
| CONFIGURATION: sim> deposit S 000011 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 001000 | |
| sim> reset | |
| sim> go | |
| START TTY DIAGNOSTIC | |
| HALT instruction 102075 | |
| sim> deposit A 000373 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: H024 PRESS PRESET (EXT&INT),RUN | |
| HALT instruction 102024 | |
| sim> reset | |
| sim> go | |
| H025 BI-O COMP | |
| H030 TURN TTY PUNCH ON | |
| PRESS RUN | |
| HALT instruction 102030 | |
| sim> attach TTY2 scratch.2752.punch | |
| sim> go | |
| H045 TURN TTY PUNCH OFF | |
| PRESS RUN | |
| HALT instruction 102045 | |
| sim> detach TTY2 | |
| sim> deposit S 100000 | |
| sim> go | |
| HALT instruction 102076 | |
| sim> go | |
| !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ | |
| !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ | |
| !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ | |
| !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ | |
| !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ | |
| !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ | |
| !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ | |
| !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ | |
| !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ | |
| !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ | |
| HALT instruction 102076 | |
| sim> set console WRU=003 | |
| sim> go | |
| INPUT THE FOLLOWING: | |
| 1 2 3 4 5 6 7 8 9 0 : - | |
| Q W E R T Y U I O P | |
| A S D F G H J K L ; | |
| Z X C V B N M , . / | |
| SHIFT+ | |
| ! " # $ % & ' ( ) * = | |
| _ @ + ^ < > ? | |
| CNTRL+ | |
| WRU TAPE NTAP XOFF EOT RU BELL TAB VT FORM | |
| RBOT CR LF | |
| HALT instruction 102076 | |
| sim> set console WRU=005 | |
| sim> go | |
| INPUT ANY KEY | |
| T H I S 040 I S 040 A 040 | |
| T E S T | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> deposit S 000002 | |
| sim> go | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> deposit S 000000 | |
| sim> go | |
| H044 INPUT TERMINATED | |
| ECHO MODE ANY INPUT IS ECHOED | |
| THIS IS A TEST | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> deposit S 000002 | |
| sim> go | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> deposit S 100000 | |
| sim> go | |
| H044 INPUT TERMINATED | |
| HALT instruction 102076 | |
| sim> deposit TTY TTIME 158000 | |
| sim> deposit S 000000 | |
| sim> go | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Partially passed. | |
| TEST NOTES: Test 2 is not executed. This test uses the teleprinter paper | |
| tape reader. This feature is not simulated. | |
| Test 7 is the oscillator tolerance test, so the TTY TTIME is set | |
| for realistic timing. | |
| STAND-ALONE DIAGNOSTIC DETAILED EXECUTION AND RESULTS | |
| ===================================================== | |
| Each execution note below presumes that the target diagnostic has been loaded. | |
| For all runs, the diagnostic configurator was used in automatic mode to load the | |
| target diagnostic from a paper tape image, as follows: | |
| sim> attach -r MSC0 24396-13601-REV-2040.tape | |
| sim> deposit S 000000 | |
| sim> boot MSC0 | |
| HALT instruction 102077 | |
| sim> attach PTR [paper-tape-image-file] | |
| sim> deposit S 001011 | |
| sim> reset | |
| sim> go 100 | |
| ------------------------------ | |
| DSN 105101 - 2767 Line Printer | |
| ------------------------------ | |
| TESTED DEVICE: LPS (hp2100_lps.c) | |
| BINARY TAPE: 12984-16001 Rev. 1611 | |
| CONFIGURATION: sim> set LPS realtime | |
| sim> attach LPS scratch.2767.printer | |
| sim> deposit S 000014 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: 2767 L.P. DIAGNOSTIC | |
| H024 PRESS PRESET (EXT&INT),RUN | |
| HALT instruction 102024 | |
| sim> reset | |
| sim> go | |
| H025 BI-O COMP | |
| H035 TURN OFF L.P. POWER | |
| HALT instruction 102035 | |
| sim> set LPS poweroff | |
| sim> go | |
| H036 TURN ON L.P. POWER | |
| HALT instruction 102036 | |
| sim> set LPS poweron | |
| sim> go | |
| H033 PUT L.P. ON-LINE | |
| HALT instruction 102033 | |
| sim> set LPS online | |
| sim> go | |
| H034 MASTER CLEAR L.P. | |
| HALT instruction 102034 | |
| sim> set LPS offline | |
| sim> go | |
| H033 PUT L.P. ON-LINE | |
| HALT instruction 102033 | |
| sim> set LPS online | |
| sim> go | |
| H040 PUT L.P. OFF-LINE. TOGGLE TOP-OF-FORM SWITCH | |
| HALT instruction 102040 | |
| sim> set LPS offline | |
| sim> go | |
| H033 PUT L.P. ON-LINE | |
| HALT instruction 102033 | |
| sim> set LPS online | |
| sim> go | |
| H041 PUT L.P. OFF-LINE. TOGGLE PAPER-STEP 5 TIMES | |
| HALT instruction 102041 | |
| sim> set LPS offline | |
| sim> go | |
| H033 PUT L.P. ON-LINE | |
| HALT instruction 102033 | |
| sim> set LPS online | |
| sim> go | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| TEST NOTES: The simulation provides no manual Master Clear, Top of Form, or | |
| Paper Step functions, so these are merely presumed above. | |
| ----------------------------------------------------------------- | |
| DSN (none) - HP2100A Cartridge Disc Memory (2871) (multiple unit) | |
| ----------------------------------------------------------------- | |
| TESTED DEVICE: DP (hp2100_dp.c) | |
| BINARY TAPE: 24203-60001 Rev. A | |
| CONFIGURATION: sim> set DPC 12557A | |
| sim> attach DPC0 scratch.U0.2871.disc | |
| sim> attach DPC1 scratch.U1.2871.disc | |
| sim> attach DPC2 scratch.U2.2871.disc | |
| sim> attach DPC3 scratch.U3.2871.disc | |
| sim> deposit S 002211 | |
| sim> reset | |
| sim> go 2 | |
| HALT instruction 107077 | |
| sim> deposit S 000400 | |
| sim> reset | |
| sim> go 100 | |
| H0 HP2100A CARTRIDGE DISC MEMORY DIAGNOSTIC | |
| H34 ENTER UNIT NUMBERS(0-3)SEPARATED BY COMMAS | |
| 0,1,2,3 | |
| H33 RESET SWITCH 8 | |
| HALT instruction 102002 | |
| sim> deposit S 000004 | |
| sim> go | |
| H24 CYLINDER TABLE | |
| 000,001,002,004,008,016,032,064,128,202 | |
| H25 WISH TO ALTER TABLE? | |
| NO | |
| H27 PATTERN TABLE | |
| 000000 177777 125252 052525 007417 | |
| 170360 162745 163346 155555 022222 | |
| H25 WISH TO ALTER TABLE? | |
| NO | |
| H62 TYPE A FOR HEADS 0,1;B FOR 2,3;C FOR ALTERNATELY 0,1 THEN 2,3 | |
| C | |
| H32 RESET SWITCH 2 | |
| HALT instruction 102002 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go 100 | |
| TEST REPORT: H0 HP2100A CARTRIDGE DISC MEMORY DIAGNOSTIC | |
| H65 PASS 0001 | |
| H65 PASS 0002 | |
| H65 PASS 0003 | |
| H65 PASS 0004 | |
| [CTRL+E] | |
| Simulation stopped | |
| TEST RESULT: Passed. | |
| TEST NOTES: Four passes are required to test all head/unit combinations. | |
| -------------------------------------------------------------------- | |
| DSN (none) - HP2100A Cartridge Disc Memory (2871) (user interaction) | |
| -------------------------------------------------------------------- | |
| TESTED DEVICE: DP (hp2100_dp.c) | |
| BINARY TAPE: 24203-60001 Rev. A | |
| CONFIGURATION: sim> set DPC 12557A | |
| sim> attach DPC0 scratch.U0.2871.disc | |
| sim> deposit S 002211 | |
| sim> reset | |
| sim> go 2 | |
| HALT instruction 107077 | |
| sim> deposit S 010020 | |
| sim> reset | |
| sim> go 100 | |
| TEST REPORT: H0 HP2100A CARTRIDGE DISC MEMORY DIAGNOSTIC | |
| H66 SET OVERRIDE SWITCH,PUSH RUN | |
| HALT instruction 102002 | |
| sim> go | |
| H37 READ AFTER WRITE ADDRESS IN S0 | |
| E64 STATUS IS 000000 SHOULD BE 000010 | |
| H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H22 CYCLIC CHECK IN S0 | |
| E64 STATUS IS 000000 SHOULD BE 000010 | |
| H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H67 CLEAR OVERRIDE SWITCH,PUSH RUN | |
| HALT instruction 102002 | |
| sim> go | |
| H41 READ DEFECTIVE TRACK IN S0 | |
| E64 STATUS IS 000000 SHOULD BE 000031 | |
| H51 CYL 0001 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H42 WRITE PROTECTED TRACK IN S0 | |
| E64 STATUS IS 000000 SHOULD BE 000011 | |
| H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H36 WRITE ADDRESS IN S0 | |
| E64 STATUS IS 000000 SHOULD BE 000011 | |
| H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 3072 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H66 SET OVERRIDE SWITCH,PUSH RUN | |
| HALT instruction 102002 | |
| sim> go | |
| H67 CLEAR OVERRIDE SWITCH,PUSH RUN | |
| HALT instruction 102002 | |
| sim> go | |
| H70 UNLOCK UNIT 0,PUSH RUN | |
| HALT instruction 102002 | |
| sim> set DPC0 unloaded | |
| sim> go | |
| H40 READY UNIT 0 | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> set DPC0 loaded | |
| sim> go | |
| H71 PRESS PRESET THEN PRESS RUN | |
| HALT instruction 102002 | |
| sim> deposit S 000140 | |
| sim> reset | |
| sim> go | |
| H65 PASS 0001 | |
| TEST RESULT: Partially passed. | |
| TEST NOTES: Step 0 tests the the defective and protected cylinder bits and | |
| the FORMAT OVERRIDE switch. These features are not simulated. | |
| ----------------------------------------------------- | |
| DSN 111001 - HP2100A Disc File (2883) (multiple unit) | |
| ----------------------------------------------------- | |
| TESTED DEVICE: DQ (hp2100_dq.c) | |
| BINARY TAPE: 12965-16001 Rev. 1451 | |
| CONFIGURATION: sim> attach DQC0 scratch.U0.2883.disc | |
| sim> attach DQC1 scratch.U1.2883.disc | |
| sim> reset | |
| sim> go 100 | |
| H0 HP 2100 SERIES DISC FILE(2883) DIAGNOSTIC | |
| H72 ENTER SELECT CODES,DMA CHANNEL IN SWITCH REGISTER,PRESS RUN | |
| HALT instruction 107001 | |
| sim> deposit S 002411 | |
| sim> go | |
| H1 ENTER PROGRAM OPTIONS IN SWITCH REGISTER,PRESS RUN | |
| HALT instruction 107077 | |
| sim> deposit S 000400 | |
| sim> go | |
| TEST REPORT: H65 PASS 0001 | |
| H65 PASS 0002 | |
| [CTRL+E] | |
| Simulation stopped | |
| TEST RESULT: Passed. | |
| TEST NOTES: Two passes are required to test all head/unit combinations. | |
| -------------------------------------------------------- | |
| DSN 111001 - HP2100A Disc File (2883) (user interaction) | |
| -------------------------------------------------------- | |
| TESTED DEVICE: DQ (hp2100_dq.c) | |
| BINARY TAPE: 12965-16001 Rev. 1451 | |
| CONFIGURATION: sim> attach DQC0 scratch.U0.2883.disc | |
| sim> reset | |
| sim> go 100 | |
| H0 HP 2100 SERIES DISC FILE(2883) DIAGNOSTIC | |
| H72 ENTER SELECT CODES,DMA CHANNEL IN SWITCH REGISTER,PRESS RUN | |
| HALT instruction 107001 | |
| sim> deposit S 002411 | |
| sim> go | |
| H1 ENTER PROGRAM OPTIONS IN SWITCH REGISTER,PRESS RUN | |
| HALT instruction 107077 | |
| sim> deposit S 000142 | |
| sim> go | |
| TEST REPORT: H66 SET FORMAT SWITCH ON UNIT 0,PUSH RUN | |
| HALT instruction 102002 | |
| sim> go | |
| H37 READ ADDRESS IN S0 | |
| E47 DATA WORD 0000 IS 000000 SHOULD BE 100000 | |
| H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0002 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H37 READ ADDRESS IN S0 | |
| E47 DATA WORD 0000 IS 000000 SHOULD BE 100001 | |
| H51 CYL 0001 HEAD 01 SECTOR 00 WORD COUNT 0002 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H33 WRITE DEFECTIVE TRACK IN S0 | |
| E64 STATUS IS 000000 SHOULD BE 000031 | |
| H51 CYL 0000 HEAD 01 SECTOR 00 WORD COUNT 0128 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H41 READ DEFECTIVE TRACK IN S0 | |
| E64 STATUS IS 000000 SHOULD BE 000031 | |
| H51 CYL 0000 HEAD 01 SECTOR 00 WORD COUNT 0128 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H67 CLEAR FORMAT SWITCH ON UNIT 0,PUSH RUN | |
| HALT instruction 102002 | |
| sim> go | |
| H33 WRITE DEFECTIVE TRACK IN S0 | |
| E64 STATUS IS 000000 SHOULD BE 000031 | |
| H51 CYL 0000 HEAD 01 SECTOR 00 WORD COUNT 0128 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H41 READ DEFECTIVE TRACK IN S0 | |
| E64 STATUS IS 000000 SHOULD BE 000031 | |
| H51 CYL 0000 HEAD 01 SECTOR 00 WORD COUNT 0128 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H42 WRITE PROTECTED TRACK IN S0 | |
| E64 STATUS IS 000000 SHOULD BE 000011 | |
| H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H36 WRITE ADDRESS IN S0 | |
| E64 STATUS IS 000000 SHOULD BE 000011 | |
| H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0046 UNIT 00 | |
| HALT instruction 102001 | |
| sim> go | |
| H66 SET FORMAT SWITCH ON UNIT 0,PUSH RUN | |
| HALT instruction 102002 | |
| sim> go | |
| H67 CLEAR FORMAT SWITCH ON UNIT 0,PUSH RUN | |
| HALT instruction 102002 | |
| sim> go | |
| H70 DISABLE UNIT 0,PUSH RUN | |
| HALT instruction 102002 | |
| sim> set DQC0 unloaded | |
| sim> go | |
| H40 ENABLE UNIT 0 | |
| [CTRL+E] | |
| Simulation stopped | |
| sim> set DQC0 loaded | |
| sim> go | |
| H71 PRESS PRESET THEN PRESS RUN | |
| HALT instruction 102002 | |
| sim> deposit S 010140 | |
| sim> reset | |
| sim> go | |
| H74 SHORT PASS | |
| H65 PASS 0001 | |
| HALT instruction 102077 | |
| TEST RESULT: Partially passed. | |
| TEST NOTES: Step 0 tests the FORMAT OVERRIDE switch, the use of the flagged | |
| track bit to indicate a protected or defective track, and the | |
| ability to write a sector address field that differs from the | |
| sector location to indicate track sparing. These features are | |
| not simulated. | |
| ----------------------------------------------------------- | |
| DSN 177777 - HP 2100 Fixed Head Disc/Drum Diagnostic (2770) | |
| ----------------------------------------------------------- | |
| TESTED DEVICE: DR (hp2100_dr.c) | |
| BINARY TAPE: 22682-16017 Rev. 1612 | |
| CONFIGURATION: sim> reset | |
| sim> go 100 | |
| H0 2100 SERIES FIXED HEAD DISC/DRUM DIAGNOSTIC | |
| ENTER SELECT CODES, CHANNELS IN SWITCH REGISTER,PUSH RUN | |
| HALT instruction 107001 | |
| sim> set DRC 180K | |
| sim> set DRC trackprot=8 | |
| sim> attach DRC0 scratch.U0.2770.disc | |
| sim> deposit S 002611 | |
| sim> go | |
| H1 CONFIGURATION COMPLETE | |
| H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, | |
| H70 ENTER PROGRAM OPTIONS IN SWITCH REGISTER, PUSH RUN | |
| HALT instruction 107077 | |
| sim> deposit S 010000 | |
| sim> go | |
| TEST REPORT: H12 DEVICE HAS 90 SECTORS | |
| H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN | |
| HALT instruction 102002 | |
| sim> set DRC unprotected | |
| sim> go | |
| H10 SET TRACK PROTECT SWITCH TO PROTECTED,PRESS RUN | |
| HALT instruction 102002 | |
| sim> set DRC protected | |
| sim> go | |
| H14 DEVICE HAS 0032 TRACKS,THE FOLLOWING ARE PROTECTED: | |
| H63 0000 TO 0007 | |
| H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN | |
| HALT instruction 102002 | |
| sim> set DRC unprotected | |
| sim> go | |
| H36 PASS 0001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| --------------------------------------------------------------- | |
| DSN 177777 - HP 2100 Fixed Head Disc/Drum Diagnostic (2771-001) | |
| --------------------------------------------------------------- | |
| TESTED DEVICE: DR (hp2100_dr.c) | |
| BINARY TAPE: 22682-16017 Rev. 1612 | |
| CONFIGURATION: sim> reset | |
| sim> go 100 | |
| H0 2100 SERIES FIXED HEAD DISC/DRUM DIAGNOSTIC | |
| ENTER SELECT CODES, CHANNELS IN SWITCH REGISTER,PUSH RUN | |
| HALT instruction 107001 | |
| sim> set DRC 720K | |
| sim> set DRC trackprot=32 | |
| sim> attach DRC0 scratch.U0.2771.disc | |
| sim> deposit S 002611 | |
| sim> go | |
| H1 CONFIGURATION COMPLETE | |
| H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, | |
| H70 ENTER PROGRAM OPTIONS IN SWITCH REGISTER, PUSH RUN | |
| HALT instruction 107077 | |
| sim> deposit S 010000 | |
| sim> go | |
| TEST REPORT: H12 DEVICE HAS 90 SECTORS | |
| H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN | |
| HALT instruction 102002 | |
| sim> set DRC unprotected | |
| sim> go | |
| H10 SET TRACK PROTECT SWITCH TO PROTECTED,PRESS RUN | |
| HALT instruction 102002 | |
| sim> set DRC protected | |
| sim> go | |
| H14 DEVICE HAS 0128 TRACKS,THE FOLLOWING ARE PROTECTED: | |
| H63 0000 TO 0031 | |
| H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN | |
| HALT instruction 102002 | |
| sim> set DRC unprotected | |
| sim> go | |
| H36 PASS 0001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| ----------------------------------------------------------- | |
| DSN 177777 - HP 2100 Fixed Head Disc/Drum Diagnostic (2773) | |
| ----------------------------------------------------------- | |
| TESTED DEVICE: DR (hp2100_dr.c) | |
| BINARY TAPE: 22682-16017 Rev. 1612 | |
| CONFIGURATION: sim> reset | |
| sim> go 100 | |
| H0 2100 SERIES FIXED HEAD DISC/DRUM DIAGNOSTIC | |
| ENTER SELECT CODES, CHANNELS IN SWITCH REGISTER,PUSH RUN | |
| HALT instruction 107001 | |
| sim> set DRC 384K | |
| sim> set DRC trackprot=16 | |
| sim> attach DRC0 scratch.U0.2773.disc | |
| sim> deposit S 002611 | |
| sim> go | |
| H1 CONFIGURATION COMPLETE | |
| H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, | |
| H70 ENTER PROGRAM OPTIONS IN SWITCH REGISTER, PUSH RUN | |
| HALT instruction 107077 | |
| sim> deposit S 010000 | |
| sim> go | |
| TEST REPORT: H12 DEVICE HAS 32 SECTORS | |
| H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN | |
| HALT instruction 102002 | |
| sim> set DRC unprotected | |
| sim> go | |
| H10 SET TRACK PROTECT SWITCH TO PROTECTED,PRESS RUN | |
| HALT instruction 102002 | |
| sim> set DRC protected | |
| sim> go | |
| H14 DEVICE HAS 0192 TRACKS,THE FOLLOWING ARE PROTECTED: | |
| H63 0000 TO 0015 | |
| H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN | |
| HALT instruction 102002 | |
| sim> set DRC unprotected | |
| sim> go | |
| H36 PASS 0001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| ----------------------------------------------------------- | |
| DSN 177777 - HP 2100 Fixed Head Disc/Drum Diagnostic (2775) | |
| ----------------------------------------------------------- | |
| TESTED DEVICE: DR (hp2100_dr.c) | |
| BINARY TAPE: 22682-16017 Rev. 1612 | |
| CONFIGURATION: sim> reset | |
| sim> go 100 | |
| H0 2100 SERIES FIXED HEAD DISC/DRUM DIAGNOSTIC | |
| ENTER SELECT CODES, CHANNELS IN SWITCH REGISTER,PUSH RUN | |
| HALT instruction 107001 | |
| sim> set DRC 1536K | |
| sim> set DRC trackprot=64 | |
| sim> attach DRC0 scratch.U0.2775.disc | |
| sim> deposit S 002611 | |
| sim> go | |
| H1 CONFIGURATION COMPLETE | |
| H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, | |
| H70 ENTER PROGRAM OPTIONS IN SWITCH REGISTER, PUSH RUN | |
| HALT instruction 107077 | |
| sim> deposit S 010000 | |
| sim> go | |
| TEST REPORT: H12 DEVICE HAS 32 SECTORS | |
| H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN | |
| HALT instruction 102002 | |
| sim> set DRC unprotected | |
| sim> go | |
| H10 SET TRACK PROTECT SWITCH TO PROTECTED,PRESS RUN | |
| HALT instruction 102002 | |
| sim> set DRC protected | |
| sim> go | |
| H14 DEVICE HAS 0768 TRACKS,THE FOLLOWING ARE PROTECTED: | |
| H63 0000 TO 0063 | |
| H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN | |
| HALT instruction 102002 | |
| sim> set DRC unprotected | |
| sim> go | |
| H36 PASS 0001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| ------------------------------------------------- | |
| DSN 101016 - 2000/Access Comm. Processor Firmware | |
| ------------------------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu.c) | |
| BINARY TAPE: 13206-16001 Rev. 1526 | |
| CONFIGURATION: sim> set CPU 2100 | |
| sim> set CPU 32K | |
| sim> set CPU IOP | |
| sim> deposit S 000013 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: 2100 2000-ACCESS COMM. PROC. FIRMWARE DIAGNOSTIC | |
| H030 CRC TEST | |
| H040 ENQ, DEQ AND PENQ TESTS | |
| H060 IAL TEST | |
| H110 READF, SAVE AND RESTR TESTS | |
| H120 LAI AND SAI TESTS | |
| H130 PFREX TEST | |
| H140 PFREI TEST | |
| H150 PFRIO TEST | |
| H160 STORE-LOAD BYTE, TRSLT | |
| AND BYTE MOVE TEST | |
| TEST 10 | |
| E165 TRSLT NOT INTERRUPTIBLE | |
| HALT instruction 106065 | |
| sim> go | |
| H230 WORD MOVE TEST | |
| TEST 11 | |
| E234 WORD MOVE NOT INTERRUPTIBLE | |
| HALT instruction 103034 | |
| sim> go | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Partially passed. | |
| TEST NOTES: Tests 10 and 11 test the interruptibility of the TRSLT and MWORD | |
| instructions. These features are not simulated. | |
| ------------------------------------------------- | |
| DSN 101217 - 2000/Access Comm. Processor Firmware | |
| ------------------------------------------------- | |
| TESTED DEVICE: CPU (hp2100_cpu.c) | |
| BINARY TAPE: 13207-16001 Rev. 1728 | |
| CONFIGURATION: sim> set CPU IOP | |
| sim> deposit S 000013 | |
| sim> reset | |
| sim> go 100 | |
| HALT instruction 102074 | |
| sim> deposit S 000000 | |
| sim> reset | |
| sim> go | |
| TEST REPORT: 21MX 2000 COMPUTER SYSTEM COMM. PROC. FIRMWARE DIAGNOSTIC | |
| H030 CRC TEST | |
| H040 ENQ, DEQ AND PENQ TESTS | |
| H060 IAL TEST | |
| H110 INS,READF, SAVE AND RESTR TESTS | |
| H120 LAI AND SAI TESTS | |
| H130 PFREX TEST | |
| H140 PFREI TEST | |
| H150 PFRIO TEST | |
| PASS 000001 | |
| HALT instruction 102077 | |
| TEST RESULT: Passed. | |
| -------------------------------------------- | |
| DSN (none) - HP 3030 Magnetic Tape Subsystem | |
| -------------------------------------------- | |
| TESTED DEVICE: MT (hp2100_mt.c) | |
| BINARY TAPE: None available. | |
| CONFIGURATION: (none) | |
| TEST REPORT: (none) | |
| TEST RESULT: Not tested. | |
| TEST NOTES: The limited documentation available for this unit suggests that | |
| the diagnostic is HP product number 20433, but no copy of this | |
| diagnostic has been found. |