blob: bbdcde573535db9c62a61398f323d0affe18c52e [file] [log] [blame] [raw]
/* pdp18b_dt.c: 18b DECtape simulator
Copyright (c) 1993-2017, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
dt (PDP-4, PDP-7) Type 550/555 DECtape
(PDP-9) TC02/TU55 DECtape
(PDP-15) TC15/TU56 DECtape
15-Mar-17 RMS Fixed dt_seterr to clear successor states
09-Mar-17 RMS Fixed dt_seterr to handle nx unit select (COVERITY)
10-Mar-16 RMS Added 3-cycle databreak set/show entries
07-Mar-16 RMS Revised for dynamically allocated memory
13-Mar-15 RMS Added APIVEC register
28-Mar-15 RMS Revised to use sim_printf
23-Jun-06 RMS Fixed switch conflict in ATTACH
Revised Type 550 header based on DECTOG formatter
13-Jun-06 RMS Fixed checksum calculation bug in Type 550
16-Aug-05 RMS Fixed C++ declaration and cast problems
25-Jan-04 RMS Revised for device debug support
14-Jan-04 RMS Revised IO device call interface
Changed sim_fsize calling sequence, added STOP_OFFR
26-Oct-03 RMS Cleaned up buffer copy code
18-Oct-03 RMS Fixed reverse checksum in read all
Added DECtape off reel message
Simplified timing
25-Apr-03 RMS Revised for extended file support
14-Mar-03 RMS Fixed variable size interaction with save/restore
17-Oct-02 RMS Fixed bug in end of reel logic
05-Oct-02 RMS Added DIB, device number support
12-Sep-02 RMS Added 16b format support
13-Aug-02 RMS Corrected Type 550 unit select logic
25-Jul-02 RMS Added PDP-4 support
30-May-02 RMS Widened POS to 32b
10-Feb-02 RMS Added PDP-7 support
06-Jan-02 RMS Revised enable/disable support
29-Nov-01 RMS Added read only unit support
25-Nov-01 RMS Revised interrupt structure
Changed POS, STATT, LASTT, FLG to arrays
29-Aug-01 RMS Added casts to PDP-8 unpack routine
17-Jul-01 RMS Moved function prototype
11-May-01 RMS Fixed bug in reset
26-Apr-01 RMS Added device enable/disable support
15-Mar-01 RMS Added 129th word to PDP-8 format
18b DECtapes are represented in memory by fixed length buffer of 32b words.
Three file formats are supported:
18b/36b 256 words per block [256 x 18b]
16b 256 words per block [256 x 16b]
12b 129 words per block [129 x 12b]
When a 16b or 12b DECtape file is read in, it is converted to 18b/36b format.
DECtape motion is measured in 3b lines. Time between lines is 33.33us.
Tape density is nominally 300 lines per inch. The format of a DECtape (as
taken from the PDP-7 formatter) is:
reverse end zone 7144 reverse end zone codes ~ 12 feet
reverse buffer 200 interblock codes
block 0
:
block n
forward buffer 200 interblock codes
forward end zone 7144 forward end zone codes ~ 12 feet
A block consists of five 18b header words, a tape-specific number of data
words, and five 18b trailer words. All systems except the PDP-8 use a
standard block length of 256 words; the PDP-8 uses a standard block length
of 86 words (x 18b = 129 words x 12b). PDP-4/7 DECtapes came in two
formats. The first 5 controllers used a 4 word header/trailer (missing
word 0/4). All later serial numbers used the standard header. The later,
standard header/trailer is simulated here.
Because a DECtape file only contains data, the simulator cannot support
write timing and mark track and can only do a limited implementation
of read all and write all. Read all assumes that the tape has been
conventionally written forward:
header word 0 0
header word 1 block number (for forward reads)
header words 2,3 0
header word 4 checksum (for reverse reads)
:
trailer word 4 checksum (for forward reads)
trailer words 3,2 0
trailer word 1 block number (for reverse reads)
trailer word 0 0
Write all writes only the data words and dumps the interblock words in the
bit bucket.
The Type 550 controller has a 4b unit select field, for units 1-8; the TC02
has a 3b unit select field, with unit 8 being represented as 0. The code
assumes that the GETUNIT macro returns a unit number in the range of 0-7,
with 8 represented as 0, and an invalid unit as -1.
*/
#include "pdp18b_defs.h"
#define DT_NUMDR 8 /* #drives */
#define UNIT_V_WLK (UNIT_V_UF + 0) /* write locked */
#define UNIT_V_8FMT (UNIT_V_UF + 1) /* 12b format */
#define UNIT_V_11FMT (UNIT_V_UF + 2) /* 16b format */
#define UNIT_WLK (1 << UNIT_V_WLK)
#define UNIT_8FMT (1 << UNIT_V_8FMT)
#define UNIT_11FMT (1 << UNIT_V_11FMT)
#define STATE u3 /* unit state */
#define LASTT u4 /* last time update */
#define WRITTEN u5 /* device buffer is dirty and needs flushing */
#define DT_WC 030 /* word count */
#define DT_CA 031 /* current addr */
#define UNIT_WPRT (UNIT_WLK | UNIT_RO) /* write protect */
/* System independent DECtape constants */
#define DT_LPERMC 6 /* lines per mark track */
#define DT_BLKWD 1 /* blk no word in h/t */
#define DT_CSMWD 4 /* checksum word in h/t */
#define DT_HTWRD 5 /* header/trailer words */
#define DT_EZLIN (8192 * DT_LPERMC) /* end zone length */
#define DT_BFLIN (200 * DT_LPERMC) /* buffer length */
#define DT_BLKLN (DT_BLKWD * DT_LPERMC) /* blk no line in h/t */
#define DT_CSMLN (DT_CSMWD * DT_LPERMC) /* csum line in h/t */
#define DT_HTLIN (DT_HTWRD * DT_LPERMC) /* header/trailer lines */
/* 16b, 18b, 36b DECtape constants */
#define D18_WSIZE 6 /* word size in lines */
#define D18_BSIZE 256 /* block size in 18b */
#define D18_TSIZE 578 /* tape size */
#define D18_LPERB (DT_HTLIN + (D18_BSIZE * DT_WSIZE) + DT_HTLIN)
#define D18_FWDEZ (DT_EZLIN + (D18_LPERB * D18_TSIZE))
#define D18_CAPAC (D18_TSIZE * D18_BSIZE) /* tape capacity */
#define D11_FILSIZ (D18_CAPAC * sizeof (int16))
/* 12b DECtape constants */
#define D8_WSIZE 4 /* word size in lines */
#define D8_BSIZE 86 /* block size in 18b */
#define D8_TSIZE 1474 /* tape size */
#define D8_LPERB (DT_HTLIN + (D8_BSIZE * DT_WSIZE) + DT_HTLIN)
#define D8_FWDEZ (DT_EZLIN + (D8_LPERB * D8_TSIZE))
#define D8_CAPAC (D8_TSIZE * D8_BSIZE) /* tape capacity */
#define D8_NBSIZE ((D8_BSIZE * D18_WSIZE) / D8_WSIZE)
#define D8_FILSIZ (D8_NBSIZE * D8_TSIZE * sizeof (int16))
/* This controller */
#define DT_CAPAC D18_CAPAC /* default */
#define DT_WSIZE D18_WSIZE
/* Calculated constants, per unit */
#define DTU_BSIZE(u) (((u)->flags & UNIT_8FMT)? D8_BSIZE: D18_BSIZE)
#define DTU_TSIZE(u) (((u)->flags & UNIT_8FMT)? D8_TSIZE: D18_TSIZE)
#define DTU_LPERB(u) (((u)->flags & UNIT_8FMT)? D8_LPERB: D18_LPERB)
#define DTU_FWDEZ(u) (((u)->flags & UNIT_8FMT)? D8_FWDEZ: D18_FWDEZ)
#define DTU_CAPAC(u) (((u)->flags & UNIT_8FMT)? D8_CAPAC: D18_CAPAC)
#define DT_LIN2BL(p,u) (((p) - DT_EZLIN) / DTU_LPERB (u))
#define DT_LIN2OF(p,u) (((p) - DT_EZLIN) % DTU_LPERB (u))
#define DT_LIN2WD(p,u) ((DT_LIN2OF (p,u) - DT_HTLIN) / DT_WSIZE)
#define DT_BLK2LN(p,u) (((p) * DTU_LPERB (u)) + DT_EZLIN)
#define DT_QREZ(u) (((u)->pos) < DT_EZLIN)
#define DT_QFEZ(u) (((u)->pos) >= ((uint32) DTU_FWDEZ (u)))
#define DT_QEZ(u) (DT_QREZ (u) || DT_QFEZ (u))
/* Status register A */
#if defined (TC02) /* TC02/TC15 */
#define DTA_V_UNIT 15 /* unit select */
#define DTA_M_UNIT 07
#define DTA_UNIT (DTA_M_UNIT << DTA_V_UNIT)
#define DTA_V_MOT 13 /* motion */
#define DTA_M_MOT 03
#define DTA_V_MODE 12 /* mode */
#define DTA_V_FNC 9 /* function */
#define DTA_M_FNC 07
#define FNC_MOVE 00 /* move */
#define FNC_SRCH 01 /* search */
#define FNC_READ 02 /* read */
#define FNC_RALL 03 /* read all */
#define FNC_WRIT 04 /* write */
#define FNC_WALL 05 /* write all */
#define FNC_WMRK 06 /* write timing */
#define DTA_V_ENB 8 /* int enable */
#define DTA_V_CERF 7 /* clr error flag */
#define DTA_V_CDTF 6 /* clr DECtape flag */
#define DTA_FWDRV (1u << (DTA_V_MOT + 1))
#define DTA_STSTP (1u << DTA_V_MOT)
#define DTA_MODE (1u << DTA_V_MODE)
#define DTA_ENB (1u << DTA_V_ENB)
#define DTA_CERF (1u << DTA_V_CERF)
#define DTA_CDTF (1u << DTA_V_CDTF)
#define DTA_RW (0777700 & ~(DTA_CERF | DTA_CDTF))
#define DTA_GETUNIT(x) (((x) >> DTA_V_UNIT) & DTA_M_UNIT)
#define DT_UPDINT if ((dtsa & DTA_ENB) && (dtsb & (DTB_ERF | DTB_DTF))) \
SET_INT (DTA); \
else CLR_INT (DTA);
#else /* Type 550 */
#define DTA_V_UNIT 12 /* unit select */
#define DTA_M_UNIT 017
#define DTA_UNIT (DTA_M_UNIT << DTA_V_UNIT)
#define DTA_V_MOT 4 /* motion */
#define DTA_M_MOT 03
#define DTA_V_FNC 0 /* function */
#define DTA_M_FNC 07
#define FNC_MOVE 00 /* move */
#define FNC_SRCH 01 /* search */
#define FNC_READ 02 /* read */
#define FNC_WRIT 03 /* write */
#define FNC_RALL 05 /* read all */
#define FNC_WALL 06 /* write all */
#define FNC_WMRK 07 /* write timing */
#define DTA_STSTP (1u << (DTA_V_MOT + 1))
#define DTA_FWDRV (1u << DTA_V_MOT)
#define DTA_MODE 0 /* not implemented */
#define DTA_RW 077
#define DTA_GETUNIT(x) map_unit[(((x) >> DTA_V_UNIT) & DTA_M_UNIT)]
#define DT_UPDINT if (dtsb & (DTB_DTF | DTB_BEF | DTB_ERF)) \
SET_INT (DTA); \
else CLR_INT (DTA);
#endif
#define DTA_GETMOT(x) (((x) >> DTA_V_MOT) & DTA_M_MOT)
#define DTA_GETFNC(x) (((x) >> DTA_V_FNC) & DTA_M_FNC)
/* Status register B */
#if defined (TC02) /* TC02/TC15 */
#define DTB_V_ERF 17 /* error flag */
#define DTB_V_MRK 16 /* mark trk err */
#define DTB_V_END 15 /* end zone err */
#define DTB_V_SEL 14 /* select err */
#define DTB_V_PAR 13 /* parity err */
#define DTB_V_TIM 12 /* timing err */
#define DTB_V_DTF 6 /* DECtape flag */
#define DTB_ERF (1u << DTB_V_ERF)
#define DTB_MRK (1u << DTB_V_MRK)
#define DTB_END (1u << DTB_V_END)
#define DTB_SEL (1u << DTB_V_SEL)
#define DTB_PAR (1u << DTB_V_PAR)
#define DTB_TIM (1u << DTB_V_TIM)
#define DTB_DTF (1u << DTB_V_DTF)
#define DTB_ALLERR (DTB_ERF | DTB_MRK | DTB_END | DTB_SEL | \
DTB_PAR | DTB_TIM)
#else /* Type 550 */
#define DTB_V_DTF 17 /* data flag */
#define DTB_V_BEF 16 /* block end flag */
#define DTB_V_ERF 15 /* error flag */
#define DTB_V_END 14 /* end of tape */
#define DTB_V_TIM 13 /* timing err */
#define DTB_V_REV 12 /* reverse */
#define DTB_V_GO 11 /* go */
#define DTB_V_MRK 10 /* mark trk err */
#define DTB_V_SEL 9 /* select err */
#define DTB_DTF (1u << DTB_V_DTF)
#define DTB_BEF (1u << DTB_V_BEF)
#define DTB_ERF (1u << DTB_V_ERF)
#define DTB_END (1u << DTB_V_END)
#define DTB_TIM (1u << DTB_V_TIM)
#define DTB_REV (1u << DTB_V_REV)
#define DTB_GO (1u << DTB_V_GO)
#define DTB_MRK (1u << DTB_V_MRK)
#define DTB_SEL (1u << DTB_V_SEL)
#define DTB_ALLERR (DTB_END | DTB_TIM | DTB_MRK | DTB_SEL)
#endif
/* DECtape state */
#define DTS_V_MOT 3 /* motion */
#define DTS_M_MOT 07
#define DTS_STOP 0 /* stopped */
#define DTS_DECF 2 /* decel, fwd */
#define DTS_DECR 3 /* decel, rev */
#define DTS_ACCF 4 /* accel, fwd */
#define DTS_ACCR 5 /* accel, rev */
#define DTS_ATSF 6 /* @speed, fwd */
#define DTS_ATSR 7 /* @speed, rev */
#define DTS_DIR 01 /* dir mask */
#define DTS_V_FNC 0 /* function */
#define DTS_M_FNC 07
#define DTS_OFR 7 /* "off reel" */
#define DTS_GETMOT(x) (((x) >> DTS_V_MOT) & DTS_M_MOT)
#define DTS_GETFNC(x) (((x) >> DTS_V_FNC) & DTS_M_FNC)
#define DTS_V_2ND 6 /* next state */
#define DTS_V_3RD (DTS_V_2ND + DTS_V_2ND) /* next next */
#define DTS_STA(y,z) (((y) << DTS_V_MOT) | ((z) << DTS_V_FNC))
#define DTS_SETSTA(y,z) uptr->STATE = DTS_STA (y, z)
#define DTS_SET2ND(y,z) uptr->STATE = (uptr->STATE & 077) | \
((DTS_STA (y, z)) << DTS_V_2ND)
#define DTS_SET3RD(y,z) uptr->STATE = (uptr->STATE & 07777) | \
((DTS_STA (y, z)) << DTS_V_3RD)
#define DTS_NXTSTA(x) (x >> DTS_V_2ND)
/* Operation substates */
#define DTO_WCO 1 /* wc overflow */
#define DTO_SOB 2 /* start of block */
/* Logging */
#define LOG_MS 001 /* move, search */
#define LOG_RW 002 /* read, write */
#define LOG_RA 004 /* read all */
#define LOG_BL 010 /* block # lblk */
#define ABS(x) (((x) < 0)? (-(x)): (x))
extern int32 *M;
extern int32 int_hwre[API_HLVL+1];
extern int32 api_vec[API_HLVL][32];
extern UNIT cpu_unit;
int32 dtsa = 0; /* status A */
int32 dtsb = 0; /* status B */
int32 dtdb = 0; /* data buffer */
int32 dt_ltime = 12; /* interline time */
int32 dt_dctime = 40000; /* decel time */
int32 dt_substate = 0;
int32 dt_logblk = 0;
int32 dt_stopoffr = 0; /* stop on off reel */
static const int32 map_unit[16] = { /* Type 550 unit map */
-1, 1, 2, 3, 4, 5, 6, 7,
0, -1, -1, -1, -1, -1, -1, -1
};
int32 dt75 (int32 dev, int32 pulse, int32 dat);
int32 dt76 (int32 dev, int32 pulse, int32 dat);
int32 dt_iors (void);
t_stat dt_svc (UNIT *uptr);
t_stat dt_reset (DEVICE *dptr);
t_stat dt_attach (UNIT *uptr, CONST char *cptr);
void dt_flush (UNIT *uptr);
t_stat dt_detach (UNIT *uptr);
void dt_deselect (int32 oldf);
void dt_newsa (int32 newf);
void dt_newfnc (UNIT *uptr, int32 newsta);
t_bool dt_setpos (UNIT *uptr);
void dt_schedez (UNIT *uptr, int32 dir);
void dt_seterr (UNIT *uptr, int32 e);
int32 dt_comobv (int32 val);
int32 dt_csum (UNIT *uptr, int32 blk);
int32 dt_gethdr (UNIT *uptr, int32 blk, int32 relpos);
/* DT data structures
dt_dev DT device descriptor
dt_unit DT unit list
dt_reg DT register list
dt_mod DT modifier list
*/
DIB dt_dib = { DEV_DTA, 2, &dt_iors, { &dt75, &dt76 } };
UNIT dt_unit[] = {
{ UDATA (&dt_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
UNIT_ROABLE, DT_CAPAC) },
{ UDATA (&dt_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
UNIT_ROABLE, DT_CAPAC) },
{ UDATA (&dt_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
UNIT_ROABLE, DT_CAPAC) },
{ UDATA (&dt_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
UNIT_ROABLE, DT_CAPAC) },
{ UDATA (&dt_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
UNIT_ROABLE, DT_CAPAC) },
{ UDATA (&dt_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
UNIT_ROABLE, DT_CAPAC) },
{ UDATA (&dt_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
UNIT_ROABLE, DT_CAPAC) },
{ UDATA (&dt_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
UNIT_ROABLE, DT_CAPAC) }
};
REG dt_reg[] = {
{ ORDATAD (DTSA, dtsa, 18, "status register A") },
{ ORDATAD (DTSB, dtsb, 18, "status register B") },
{ ORDATAD (DTDB, dtdb, 18, "data buffer") },
{ FLDATAD (INT, int_hwre[API_DTA], INT_V_DTA, "interrupt pending flag") },
#if defined (DTA_V_ENB)
{ FLDATAD (ENB, dtsa, DTA_V_ENB, "interrupt enable flag") },
#endif
{ FLDATAD (DTF, dtsb, DTB_V_DTF, "DECtape flag") },
#if defined (DTB_V_BEF)
{ FLDATAD (BEF, dtsb, DTB_V_BEF, "block and flag") },
#endif
{ FLDATAD (ERF, dtsb, DTB_V_ERF, "error flag") },
{ DRDATAD (LTIME, dt_ltime, 31, "time between lines"), REG_NZ },
{ DRDATAD (DCTIME, dt_dctime, 31, "time to declarate to a full stop"), REG_NZ },
{ ORDATAD (SUBSTATE, dt_substate, 2, "read/write command substate") },
{ DRDATA (LBLK, dt_logblk, 12), REG_HIDDEN },
{ URDATAD (POS, dt_unit[0].pos, 10, T_ADDR_W, 0,
DT_NUMDR, PV_LEFT | REG_RO, "positions in lines, units 0 to 7") },
{ URDATAD (STATT, dt_unit[0].STATE, 8, 18, 0,
DT_NUMDR, REG_RO, "unit state, units 0 to 7") },
{ URDATA (LASTT, dt_unit[0].LASTT, 10, T_ADDR_W, 0,
DT_NUMDR, REG_HRO) },
{ ORDATA (DEVNO, dt_dib.dev, 6), REG_HRO },
{ FLDATAD (STOP_OFFR, dt_stopoffr, 0, "stop on off-reel error") },
#if defined (TC02)
{ ORDATA (APIVEC, api_vec[API_DTA][INT_V_DTA], 6), REG_HRO },
#endif
{ NULL }
};
MTAB dt_mod[] = {
{ UNIT_WLK, 0, "write enabled", "WRITEENABLED", NULL },
{ UNIT_WLK, UNIT_WLK, "write locked", "LOCKED", NULL },
{ UNIT_8FMT + UNIT_11FMT, 0, "18b", NULL, NULL },
{ UNIT_8FMT + UNIT_11FMT, UNIT_8FMT, "12b", NULL, NULL },
{ UNIT_8FMT + UNIT_11FMT, UNIT_11FMT, "16b", NULL, NULL },
#if defined (TC02)
{ MTAB_XTD|MTAB_VDV|MTAB_NMO, DT_WC, "WC", "WC", &set_3cyc_reg, &show_3cyc_reg, (void *)"WC" },
{ MTAB_XTD|MTAB_VDV|MTAB_NMO, DT_CA, "CA", "CA", &set_3cyc_reg, &show_3cyc_reg, (void *)"CA" },
#endif
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO", &set_devno, &show_devno },
{ 0 }
};
DEBTAB dt_deb[] = {
{ "MOTION", LOG_MS },
{ "DATA", LOG_RW },
{ "READALL", LOG_RA },
{ "BLOCK", LOG_BL },
{ NULL, 0 }
};
DEVICE dt_dev = {
"DT", dt_unit, dt_reg, dt_mod,
DT_NUMDR, 8, 24, 1, 8, 18,
NULL, NULL, &dt_reset,
NULL, &dt_attach, &dt_detach,
&dt_dib, DEV_DISABLE | DEV_DEBUG, 0,
dt_deb, NULL, NULL
};
/* IOT routines */
#if defined (TC02) /* TC02/TC15 */
int32 dt75 (int32 dev, int32 pulse, int32 dat)
{
int32 old_dtsa = dtsa, fnc;
UNIT *uptr;
if (((pulse & 060) == 040) && (pulse & 05)) { /* select */
if (pulse & 01) /* DTCA */
dtsa = 0;
if (pulse & 02) /* DTRA!... */
dat = dtsa;
if (pulse & 04) { /* DTXA */
if ((dat & DTA_CERF) == 0)
dtsb = dtsb & ~DTB_ALLERR;
if ((dat & DTA_CDTF) == 0)
dtsb = dtsb & ~DTB_DTF;
dtsa = dtsa ^ (dat & DTA_RW);
}
if ((old_dtsa ^ dtsa) & DTA_UNIT)
dt_deselect (old_dtsa);
uptr = dt_dev.units + DTA_GETUNIT (dtsa); /* get unit */
fnc = DTA_GETFNC (dtsa); /* get fnc */
if (((uptr->flags) & UNIT_DIS) || /* disabled? */
(fnc >= FNC_WMRK) || /* write mark? */
((fnc == FNC_WRIT) && (uptr->flags & UNIT_WPRT)) ||
((fnc == FNC_WALL) && (uptr->flags & UNIT_WPRT)))
dt_seterr (uptr, DTB_SEL); /* select err */
else dt_newsa (dtsa); /* new func */
DT_UPDINT;
return dat;
}
if ((pulse & 067) == 042) /* DTRA */
return dtsa;
if ((pulse & 067) == 061) /* DTEF */
return ((dtsb & DTB_ERF)? IOT_SKP + dat: dat);
if ((pulse & 067) == 062) /* DTRB */
return dtsb;
if ((pulse & 067) == 063) /* DTEF!DTRB */
return ((dtsb & DTB_ERF)? IOT_SKP + dtsb: dtsb);
return dat;
}
int32 dt76 (int32 dev, int32 pulse, int32 dat)
{
if ((pulse & 01) && (dtsb & DTB_DTF)) /* DTDF */
return IOT_SKP + dat;
return dat;
}
#else /* Type 550 */
int32 dt75 (int32 dev, int32 pulse, int32 dat)
{
if (((pulse & 041) == 001) && (dtsb & DTB_DTF)) /* MMDF */
dat = dat | IOT_SKP;
else if (((pulse & 041) == 041) && (dtsb & DTB_ERF)) /* MMEF */
dat = dat | IOT_SKP;
if (pulse & 002) { /* MMRD */
dat = (dat & ~DMASK) | dtdb;
dtsb = dtsb & ~(DTB_DTF | DTB_BEF);
}
if (pulse & 004) { /* MMWR */
dtdb = dat & DMASK;
dtsb = dtsb & ~(DTB_DTF | DTB_BEF);
}
DT_UPDINT;
return dat;
}
int32 dt76 (int32 dev, int32 pulse, int32 dat)
{
int32 fnc, mot, unum;
UNIT *uptr = NULL;
unum = DTA_GETUNIT (dtsa); /* get unit no */
if (unum >= 0) /* get unit */
uptr = dt_dev.units + unum;
if ((pulse & 001) && (dtsb & DTB_BEF)) /* MMBF */
dat = dat | IOT_SKP;
if (pulse & 002) { /* MMRS */
dtsb = dtsb & ~(DTB_REV | DTB_GO); /* clr rev, go */
if (uptr) { /* valid unit? */
mot = DTS_GETMOT (uptr->STATE); /* get motion */
if (mot & DTS_DIR) /* rev? set */
dtsb = dtsb | DTB_REV;
if ((mot >= DTS_ACCF) || (uptr->STATE & 0777700))
dtsb = dtsb | DTB_GO; /* accel? go */
}
dat = (dat & ~DMASK) | dtsb;
}
if ((pulse & 044) == 044) { /* MMSE */
if ((dtsa ^ dat) & DTA_UNIT) /* new unit? */
dt_deselect (dtsa);
dtsa = (dtsa & ~DTA_UNIT) | (dat & DTA_UNIT);
dtsb = dtsb & ~(DTB_DTF | DTB_BEF | DTB_ERF | DTB_ALLERR);
}
else if ((pulse & 044) == 004) { /* MMLC */
dtsa = (dtsa & ~DTA_RW) | (dat & DTA_RW); /* load dtsa */
dtsb = dtsb & ~(DTB_DTF | DTB_BEF | DTB_ERF | DTB_ALLERR);
fnc = DTA_GETFNC (dtsa); /* get fnc */
if ((uptr == NULL) || /* invalid? */
((uptr->flags) & UNIT_DIS) || /* disabled? */
(fnc >= FNC_WMRK) || /* write mark? */
((fnc == FNC_WRIT) && (uptr->flags & UNIT_WLK)) ||
((fnc == FNC_WALL) && (uptr->flags & UNIT_WLK)))
dt_seterr (uptr, DTB_SEL); /* select err */
else dt_newsa (dtsa);
}
DT_UPDINT;
return dat;
}
#endif
/* Unit deselect */
void dt_deselect (int32 oldf)
{
int32 old_unit, old_mot;
UNIT *uptr;
old_unit = DTA_GETUNIT (oldf); /* get unit no */
if (old_unit < 0) /* invalid? */
return;
uptr = dt_dev.units + old_unit; /* get unit */
old_mot = DTS_GETMOT (uptr->STATE);
if (old_mot >= DTS_ATSF) /* at speed? */
dt_newfnc (uptr, DTS_STA (old_mot, DTS_OFR));
else if (old_mot >= DTS_ACCF) /* accelerating? */
DTS_SET2ND (DTS_ATSF | (old_mot & DTS_DIR), DTS_OFR);
return;
}
/* Command register change
1. If change in motion, stop to start
- schedule acceleration
- set function as next state
2. If change in motion, start to stop
- if not already decelerating (could be reversing),
schedule deceleration
3. If change in direction,
- if not decelerating, schedule deceleration
- set accelerating (other dir) as next state
- set function as next next state
4. If not accelerating or at speed,
- schedule acceleration
- set function as next state
5. If not yet at speed,
- set function as next state
6. If at speed,
- set function as current state, schedule function
*/
void dt_newsa (int32 newf)
{
int32 new_unit, prev_mot, new_fnc;
int32 prev_mving, new_mving, prev_dir, new_dir;
UNIT *uptr;
new_unit = DTA_GETUNIT (newf); /* new unit */
if (new_unit < 0) /* invalid? */
return;
uptr = dt_dev.units + new_unit;
if ((uptr->flags & UNIT_ATT) == 0) { /* new unit attached? */
dt_seterr (uptr, DTB_SEL); /* no, error */
return;
}
prev_mot = DTS_GETMOT (uptr->STATE); /* previous motion */
prev_mving = prev_mot != DTS_STOP; /* previous moving? */
prev_dir = prev_mot & DTS_DIR; /* previous dir? */
new_mving = (newf & DTA_STSTP) != 0; /* new moving? */
new_dir = (newf & DTA_FWDRV) != 0; /* new dir? */
new_fnc = DTA_GETFNC (newf); /* new function? */
if ((prev_mving | new_mving) == 0) /* stop to stop */
return;
if (new_mving & ~prev_mving) { /* start? */
if (dt_setpos (uptr)) /* update pos */
return;
sim_cancel (uptr); /* stop current */
sim_activate (uptr, dt_dctime - (dt_dctime >> 2)); /* sched accel */
DTS_SETSTA (DTS_ACCF | new_dir, 0); /* state = accel */
DTS_SET2ND (DTS_ATSF | new_dir, new_fnc); /* next = fnc */
return;
}
if (prev_mving & ~new_mving) { /* stop? */
if ((prev_mot & ~DTS_DIR) != DTS_DECF) { /* !already stopping? */
if (dt_setpos (uptr)) /* update pos */
return;
sim_cancel (uptr); /* stop current */
sim_activate (uptr, dt_dctime); /* schedule decel */
}
DTS_SETSTA (DTS_DECF | prev_dir, 0); /* state = decel */
return;
}
if (prev_dir ^ new_dir) { /* dir chg? */
if ((prev_mot & ~DTS_DIR) != DTS_DECF) { /* !already stopping? */
if (dt_setpos (uptr)) /* update pos */
return;
sim_cancel (uptr); /* stop current */
sim_activate (uptr, dt_dctime); /* schedule decel */
}
DTS_SETSTA (DTS_DECF | prev_dir, 0); /* state = decel */
DTS_SET2ND (DTS_ACCF | new_dir, 0); /* next = accel */
DTS_SET3RD (DTS_ATSF | new_dir, new_fnc); /* next next = fnc */
return;
}
if (prev_mot < DTS_ACCF) { /* not accel/at speed? */
if (dt_setpos (uptr)) /* update pos */
return;
sim_cancel (uptr); /* cancel cur */
sim_activate (uptr, dt_dctime - (dt_dctime >> 2)); /* sched accel */
DTS_SETSTA (DTS_ACCF | new_dir, 0); /* state = accel */
DTS_SET2ND (DTS_ATSF | new_dir, new_fnc); /* next = fnc */
return;
}
if (prev_mot < DTS_ATSF) { /* not at speed? */
DTS_SET2ND (DTS_ATSF | new_dir, new_fnc); /* next = fnc */
return;
}
dt_newfnc (uptr, DTS_STA (DTS_ATSF | new_dir, new_fnc));/* state = fnc */
return;
}
/* Schedule new DECtape function
This routine is only called if
- the selected unit is attached
- the selected unit is at speed (forward or backward)
This routine
- updates the selected unit's position
- updates the selected unit's state
- schedules the new operation
*/
void dt_newfnc (UNIT *uptr, int32 newsta)
{
int32 fnc, dir, blk, unum, newpos;
#if defined (TC02)
int32 relpos;
#endif
uint32 oldpos;
oldpos = uptr->pos; /* save old pos */
if (dt_setpos (uptr)) /* update pos */
return;
uptr->STATE = newsta; /* update state */
fnc = DTS_GETFNC (uptr->STATE); /* set variables */
dir = DTS_GETMOT (uptr->STATE) & DTS_DIR;
unum = (int32) (uptr - dt_dev.units);
if (oldpos == uptr->pos) /* bump pos */
uptr->pos = uptr->pos + (dir? -1: 1);
blk = DT_LIN2BL (uptr->pos, uptr);
if (dir? DT_QREZ (uptr): DT_QFEZ (uptr)) { /* wrong ez? */
dt_seterr (uptr, DTB_END); /* set ez flag, stop */
return;
}
sim_cancel (uptr); /* cancel cur op */
dt_substate = DTO_SOB; /* substate = block start */
switch (fnc) { /* case function */
case DTS_OFR: /* off reel */
if (dir) /* rev? < start */
newpos = -1000;
else newpos = DTU_FWDEZ (uptr) + DT_EZLIN + 1000; /* fwd? > end */
break;
case FNC_MOVE: /* move */
dt_schedez (uptr, dir); /* sched end zone */
if (DEBUG_PRI (dt_dev, LOG_MS))
fprintf (sim_deb, ">>DT%d: moving %s\n",
unum, (dir? "backward": "forward"));
return; /* done */
case FNC_SRCH: /* search */
if (dir)
newpos = DT_BLK2LN ((DT_QFEZ (uptr)?
DTU_TSIZE (uptr): blk), uptr) - DT_BLKLN - DT_WSIZE;
else newpos = DT_BLK2LN ((DT_QREZ (uptr)?
0: blk + 1), uptr) + DT_BLKLN + (DT_WSIZE - 1);
if (DEBUG_PRI (dt_dev, LOG_MS))
fprintf (sim_deb, ">>DT%d: searching %s\n", unum,
(dir? "backward": "forward"));
break;
case FNC_WRIT: /* write */
case FNC_READ: /* read */
#if defined (TC02) /* TC02/TC15 */
if (DT_QEZ (uptr)) { /* in "ok" end zone? */
if (dir)
newpos = DTU_FWDEZ (uptr) - DT_HTLIN - DT_WSIZE;
else newpos = DT_EZLIN + DT_HTLIN + (DT_WSIZE - 1);
break;
}
relpos = DT_LIN2OF (uptr->pos, uptr); /* cur pos in blk */
if ((relpos >= DT_HTLIN) && /* in data zone? */
(relpos < (DTU_LPERB (uptr) - DT_HTLIN))) {
dt_seterr (uptr, DTB_SEL);
return;
}
if (dir)
newpos = DT_BLK2LN (((relpos >= (DTU_LPERB (uptr) - DT_HTLIN))?
blk + 1: blk), uptr) - DT_HTLIN - DT_WSIZE;
else newpos = DT_BLK2LN (((relpos < DT_HTLIN)?
blk: blk + 1), uptr) + DT_HTLIN + (DT_WSIZE - 1);
break;
#endif
case FNC_RALL: /* read all */
case FNC_WALL: /* write all */
if (DT_QEZ (uptr)) { /* in "ok" end zone? */
if (dir)
newpos = DTU_FWDEZ (uptr) - DT_WSIZE;
else newpos = DT_EZLIN + (DT_WSIZE - 1);
}
else {
newpos = ((uptr->pos) / DT_WSIZE) * DT_WSIZE;
if (!dir)
newpos = newpos + (DT_WSIZE - 1);
}
if (DEBUG_PRI (dt_dev, LOG_RA) ||
(DEBUG_PRI (dt_dev, LOG_BL) && (blk == dt_logblk)))
fprintf (sim_deb, ">>DT%d: read all block %d %s%s\n",
unum, blk, (dir? "backward": "forward"),
((dtsa & DTA_MODE)? " continuous]": " "));
break;
default:
dt_seterr (uptr, DTB_SEL); /* bad state */
return;
}
#if defined (TYPE550) /* Type 550 */
if ((fnc == FNC_WRIT) || (fnc == FNC_WALL)) { /* write function? */
dtsb = dtsb | DTB_DTF; /* set data flag */
DT_UPDINT;
}
#endif
sim_activate (uptr, ABS (newpos - ((int32) uptr->pos)) * dt_ltime);
return;
}
/* Update DECtape position
DECtape motion is modeled as a constant velocity, with linear
acceleration and deceleration. The motion equations are as follows:
t = time since operation started
tmax = time for operation (accel, decel only)
v = at speed velocity in lines (= 1/dt_ltime)
Then:
at speed dist = t * v
accel dist = (t^2 * v) / (2 * tmax)
decel dist = (((2 * t * tmax) - t^2) * v) / (2 * tmax)
This routine uses the relative (integer) time, rather than the absolute
(floating point) time, to allow save and restore of the start times.
*/
t_bool dt_setpos (UNIT *uptr)
{
uint32 new_time, ut, ulin, udelt;
int32 mot = DTS_GETMOT (uptr->STATE);
int32 unum, delta;
new_time = sim_grtime (); /* current time */
ut = new_time - uptr->LASTT; /* elapsed time */
if (ut == 0) /* no time gone? exit */
return FALSE;
uptr->LASTT = new_time; /* update last time */
switch (mot & ~DTS_DIR) { /* case on motion */
case DTS_STOP: /* stop */
delta = 0;
break;
case DTS_DECF: /* slowing */
ulin = ut / (uint32) dt_ltime;
udelt = dt_dctime / dt_ltime;
delta = ((ulin * udelt * 2) - (ulin * ulin)) / (2 * udelt);
break;
case DTS_ACCF: /* accelerating */
ulin = ut / (uint32) dt_ltime;
udelt = (dt_dctime - (dt_dctime >> 2)) / dt_ltime;
delta = (ulin * ulin) / (2 * udelt);
break;
case DTS_ATSF: /* at speed */
delta = ut / (uint32) dt_ltime;
break;
}
if (mot & DTS_DIR) /* update pos */
uptr->pos = uptr->pos - delta;
else uptr->pos = uptr->pos + delta;
if (((int32) uptr->pos < 0) ||
((int32) uptr->pos > (DTU_FWDEZ (uptr) + DT_EZLIN))) {
detach_unit (uptr); /* off reel? */
uptr->STATE = uptr->pos = 0;
unum = (int32) (uptr - dt_dev.units);
if (unum == DTA_GETUNIT (dtsa)) /* if selected, */
dt_seterr (uptr, DTB_SEL); /* error */
return TRUE;
}
return FALSE;
}
/* Unit service
Unit must be attached, detach cancels operation
*/
t_stat dt_svc (UNIT *uptr)
{
int32 mot = DTS_GETMOT (uptr->STATE);
int32 dir = mot & DTS_DIR;
int32 fnc = DTS_GETFNC (uptr->STATE);
int32 *fbuf = (int32 *) uptr->filebuf;
int32 unum = uptr - dt_dev.units;
int32 blk, wrd, ma, relpos;
uint32 ba;
/* Motion cases
Decelerating - if next state != stopped, must be accel reverse
Accelerating - next state must be @speed, schedule function
At speed - do functional processing
*/
switch (mot) {
case DTS_DECF: case DTS_DECR: /* decelerating */
if (dt_setpos (uptr)) /* upd pos; off reel? */
return IORETURN (dt_stopoffr, STOP_DTOFF);
uptr->STATE = DTS_NXTSTA (uptr->STATE); /* advance state */
if (uptr->STATE) /* not stopped? */
sim_activate (uptr, dt_dctime - (dt_dctime >> 2)); /* reversing */
return SCPE_OK;
case DTS_ACCF: case DTS_ACCR: /* accelerating */
dt_newfnc (uptr, DTS_NXTSTA (uptr->STATE)); /* adv state, sched */
return SCPE_OK;
case DTS_ATSF: case DTS_ATSR: /* at speed */
break; /* check function */
default: /* other */
dt_seterr (uptr, DTB_SEL); /* state error */
return SCPE_OK;
}
/* Functional cases
Move - must be at end zone
Search - transfer block number, schedule next block
Off reel - detach unit (it must be deselected)
*/
if (dt_setpos (uptr)) /* upd pos; off reel? */
return IORETURN (dt_stopoffr, STOP_DTOFF);
if (DT_QEZ (uptr)) { /* in end zone? */
dt_seterr (uptr, DTB_END); /* end zone error */
return SCPE_OK;
}
blk = DT_LIN2BL (uptr->pos, uptr); /* get block # */
switch (fnc) { /* at speed, check fnc */
case FNC_MOVE: /* move */
dt_seterr (uptr, DTB_END); /* end zone error */
return SCPE_OK;
case DTS_OFR: /* off reel */
detach_unit (uptr); /* must be deselected */
uptr->STATE = uptr->pos = 0; /* no visible action */
break;
/* TC02/TC15 service */
/* Search */
#if defined (TC02) /* TC02/TC15 */
case FNC_SRCH: /* search */
if (dtsb & DTB_DTF) { /* DTF set? */
dt_seterr (uptr, DTB_TIM); /* timing error */
return SCPE_OK;
}
sim_activate (uptr, DTU_LPERB (uptr) * dt_ltime);/* sched next block */
M[DT_WC] = (M[DT_WC] + 1) & DMASK; /* inc WC */
ma = M[DT_CA] & AMASK; /* get mem addr */
if (MEM_ADDR_OK (ma)) /* store block # */
M[ma] = blk;
if (((dtsa & DTA_MODE) == 0) || (M[DT_WC] == 0))
dtsb = dtsb | DTB_DTF; /* set DTF */
if (DEBUG_PRI (dt_dev, LOG_MS))
fprintf (sim_deb, ">>DT%d: found block %d\n", unum, blk);
break;
/* Read has four subcases
Start of block, not wc ovf - check that DTF is clear, otherwise normal
Normal - increment MA, WC, copy word from tape to memory
if read dir != write dir, bits must be scrambled
if wc overflow, next state is wc overflow
if end of block, possibly set DTF, next state is start of block
Wc ovf, not start of block -
if end of block, possibly set DTF, next state is start of block
Wc ovf, start of block - if end of block reached, timing error,
otherwise, continue to next word
*/
case FNC_READ: /* read */
wrd = DT_LIN2WD (uptr->pos, uptr); /* get word # */
switch (dt_substate) { /* case on substate */
case DTO_SOB: /* start of block */
if (dtsb & DTB_DTF) { /* DTF set? */
dt_seterr (uptr, DTB_TIM); /* timing error */
return SCPE_OK;
}
if (DEBUG_PRI (dt_dev, LOG_RW) ||
(DEBUG_PRI (dt_dev, LOG_BL) && (blk == dt_logblk)))
fprintf (sim_deb, ">>DT%d: reading block %d %s%s\n",
unum, blk, (dir? "backward": "forward"),
((dtsa & DTA_MODE)? " continuous": " "));
dt_substate = 0;
/* fall through */
case 0: /* normal read */
M[DT_WC] = (M[DT_WC] + 1) & DMASK; /* incr WC, CA */
M[DT_CA] = (M[DT_CA] + 1) & DMASK;
ma = M[DT_CA] & AMASK; /* mem addr */
ba = (blk * DTU_BSIZE (uptr)) + wrd; /* buffer ptr */
dtdb = fbuf[ba]; /* get tape word */
if (dir) /* rev? comp obv */
dtdb = dt_comobv (dtdb);
if (MEM_ADDR_OK (ma)) /* mem addr legal? */
M[ma] = dtdb;
if (M[DT_WC] == 0) /* wc ovf? */
dt_substate = DTO_WCO;
/* fall through */
case DTO_WCO: /* wc ovf, not sob */
if (wrd != (dir? 0: DTU_BSIZE (uptr) - 1)) /* not last? */
sim_activate (uptr, DT_WSIZE * dt_ltime);
else {
dt_substate = dt_substate | DTO_SOB;
sim_activate (uptr, ((2 * DT_HTLIN) + DT_WSIZE) * dt_ltime);
if (((dtsa & DTA_MODE) == 0) || (M[DT_WC] == 0))
dtsb = dtsb | DTB_DTF; /* set DTF */
}
break;
case DTO_WCO | DTO_SOB: /* next block */
if (wrd == (dir? 0: DTU_BSIZE (uptr))) /* end of block? */
dt_seterr (uptr, DTB_TIM); /* timing error */
else sim_activate (uptr, DT_WSIZE * dt_ltime);
break;
} /* end case subst */
break;
/* Write has four subcases
Start of block, not wc ovf - check that DTF is clear, set block direction
Normal - increment MA, WC, copy word from memory to tape
if wc overflow, next state is wc overflow
if end of block, possibly set DTF, next state is start of block
Wc ovf, not start of block -
copy 0 to tape
if end of block, possibly set DTF, next state is start of block
Wc ovf, start of block - schedule end zone
*/
case FNC_WRIT: /* write */
wrd = DT_LIN2WD (uptr->pos, uptr); /* get word # */
switch (dt_substate) { /* case on substate */
case DTO_SOB: /* start block */
if (dtsb & DTB_DTF) { /* DTF set? */
dt_seterr (uptr, DTB_TIM); /* timing error */
return SCPE_OK;
}
if (DEBUG_PRI (dt_dev, LOG_RW) ||
(DEBUG_PRI (dt_dev, LOG_BL) && (blk == dt_logblk)))
fprintf (sim_deb, ">>DT%d: writing block %d %s%s\n", unum, blk,
(dir? "backward": "forward"),
((dtsa & DTA_MODE)? " continuous": " "));
dt_substate = 0;
/* fall through */
case 0: /* normal write */
M[DT_WC] = (M[DT_WC] + 1) & DMASK; /* incr WC, CA */
M[DT_CA] = (M[DT_CA] + 1) & DMASK;
/* fall through */
case DTO_WCO: /* wc ovflo */
ma = M[DT_CA] & AMASK; /* mem addr */
ba = (blk * DTU_BSIZE (uptr)) + wrd; /* buffer ptr */
dtdb = dt_substate? 0: M[ma]; /* get word */
if (dir) /* rev? comp obv */
dtdb = dt_comobv (dtdb);
fbuf[ba] = dtdb; /* write word */
uptr->WRITTEN = TRUE;
if (ba >= uptr->hwmark)
uptr->hwmark = ba + 1;
if (M[DT_WC] == 0)
dt_substate = DTO_WCO;
if (wrd != (dir? 0: DTU_BSIZE (uptr) - 1)) /* not last? */
sim_activate (uptr, DT_WSIZE * dt_ltime);
else {
dt_substate = dt_substate | DTO_SOB;
sim_activate (uptr, ((2 * DT_HTLIN) + DT_WSIZE) * dt_ltime);
if (((dtsa & DTA_MODE) == 0) || (M[DT_WC] == 0))
dtsb = dtsb | DTB_DTF; /* set DTF */
}
break;
case DTO_WCO | DTO_SOB: /* all done */
dt_schedez (uptr, dir); /* sched end zone */
break;
} /* end case subst */
break;
/* Read all has two subcases
Not word count overflow - increment MA, WC, copy word from tape to memory
Word count overflow - schedule end zone
*/
case FNC_RALL: /* read all */
switch (dt_substate) { /* case on substate */
case 0: case DTO_SOB: /* read in progress */
if (dtsb & DTB_DTF) { /* DTF set? */
dt_seterr (uptr, DTB_TIM); /* timing error */
return SCPE_OK;
}
relpos = DT_LIN2OF (uptr->pos, uptr); /* cur pos in blk */
M[DT_WC] = (M[DT_WC] + 1) & DMASK; /* incr WC, CA */
M[DT_CA] = (M[DT_CA] + 1) & DMASK;
ma = M[DT_CA] & AMASK; /* mem addr */
if ((relpos >= DT_HTLIN) && /* in data zone? */
(relpos < (DTU_LPERB (uptr) - DT_HTLIN))) {
wrd = DT_LIN2WD (uptr->pos, uptr);
ba = (blk * DTU_BSIZE (uptr)) + wrd;
dtdb = fbuf[ba]; /* get tape word */
}
else dtdb = dt_gethdr (uptr, blk, relpos); /* get hdr */
if (dir) /* rev? comp obv */
dtdb = dt_comobv (dtdb);
sim_activate (uptr, DT_WSIZE * dt_ltime);
if (MEM_ADDR_OK (ma)) /* mem addr legal? */
M[ma] = dtdb;
if (M[DT_WC] == 0)
dt_substate = DTO_WCO;
if (((dtsa & DTA_MODE) == 0) || (M[DT_WC] == 0))
dtsb = dtsb | DTB_DTF; /* set DTF */
break;
case DTO_WCO: case DTO_WCO | DTO_SOB: /* all done */
dt_schedez (uptr, dir); /* sched end zone */
break;
} /* end case substate */
break;
/* Write all has two subcases
Not word count overflow - increment MA, WC, copy word from memory to tape
Word count overflow - schedule end zone
*/
case FNC_WALL: /* write all */
switch (dt_substate) { /* case on substate */
case 0: case DTO_SOB: /* read in progress */
if (dtsb & DTB_DTF) { /* DTF set? */
dt_seterr (uptr, DTB_TIM); /* timing error */
return SCPE_OK;
}
relpos = DT_LIN2OF (uptr->pos, uptr); /* cur pos in blk */
M[DT_WC] = (M[DT_WC] + 1) & DMASK; /* incr WC, CA */
M[DT_CA] = (M[DT_CA] + 1) & DMASK;
ma = M[DT_CA] & AMASK; /* mem addr */
if ((relpos >= DT_HTLIN) && /* in data zone? */
(relpos < (DTU_LPERB (uptr) - DT_HTLIN))) {
dtdb = M[ma]; /* get mem word */
if (dir)
dtdb = dt_comobv (dtdb);
wrd = DT_LIN2WD (uptr->pos, uptr);
ba = (blk * DTU_BSIZE (uptr)) + wrd;
fbuf[ba] = dtdb; /* write word */
if (ba >= uptr->hwmark)
uptr->hwmark = ba + 1;
}
/* ignore hdr */
sim_activate (uptr, DT_WSIZE * dt_ltime);
if (M[DT_WC] == 0)
dt_substate = DTO_WCO;
if (((dtsa & DTA_MODE) == 0) || (M[DT_WC] == 0))
dtsb = dtsb | DTB_DTF; /* set DTF */
break;
case DTO_WCO: case DTO_WCO | DTO_SOB: /* all done */
dt_schedez (uptr, dir); /* sched end zone */
break;
} /* end case substate */
break;
/* Type 550 service */
/* Search */
#else /* Type 550 */
case FNC_SRCH: /* search */
if (dtsb & DTB_DTF) { /* DTF set? */
dt_seterr (uptr, DTB_TIM); /* timing error */
return SCPE_OK;
}
sim_activate (uptr, DTU_LPERB (uptr) * dt_ltime);/* sched next block */
dtdb = blk; /* store block # */
dtsb = dtsb | DTB_DTF; /* set DTF */
if (DEBUG_PRI (dt_dev, LOG_MS))
fprintf (sim_deb, ">>DT%d: search found block %d\n", unum, blk);
break;
/* Read and read all */
case FNC_READ: case FNC_RALL:
if (dtsb & DTB_DTF) { /* DTF set? */
dt_seterr (uptr, DTB_TIM); /* timing error */
return SCPE_OK;
}
sim_activate (uptr, DT_WSIZE * dt_ltime); /* sched next word */
relpos = DT_LIN2OF (uptr->pos, uptr); /* cur pos in blk */
if ((relpos >= DT_HTLIN) && /* in data zone? */
(relpos < (DTU_LPERB (uptr) - DT_HTLIN))) {
wrd = DT_LIN2WD (uptr->pos, uptr);
ba = (blk * DTU_BSIZE (uptr)) + wrd;
dtdb = fbuf[ba]; /* get tape word */
dtsb = dtsb | DTB_DTF; /* set flag */
}
else {
ma = (2 * DT_HTWRD) + DTU_BSIZE (uptr) - DT_CSMWD - 1;
wrd = relpos / DT_WSIZE; /* hdr start = wd 0 */
#if defined (OLD_TYPE550)
if ((wrd == 0) || /* skip 1st, last */
(wrd == ((2 * DT_HTWRD) + DTU_BSIZE (uptr) - 1))) break;
#endif
if ((fnc == FNC_READ) && /* read, skip if not */
(wrd != DT_CSMWD) && /* fwd, rev cksum */
(wrd != ma))
break;
dtdb = dt_gethdr (uptr, blk, relpos);
if (wrd == (dir? DT_CSMWD: ma)) /* at end csum? */
dtsb = dtsb | DTB_BEF; /* end block */
else dtsb = dtsb | DTB_DTF; /* else next word */
}
if (dir)
dtdb = dt_comobv (dtdb);
break;
/* Write and write all */
case FNC_WRIT: case FNC_WALL:
if (dtsb & DTB_DTF) { /* DTF set? */
dt_seterr (uptr, DTB_TIM); /* timing error */
return SCPE_OK;
}
sim_activate (uptr, DT_WSIZE * dt_ltime); /* sched next word */
relpos = DT_LIN2OF (uptr->pos, uptr); /* cur pos in blk */
if ((relpos >= DT_HTLIN) && /* in data zone? */
(relpos < (DTU_LPERB (uptr) - DT_HTLIN))) {
wrd = DT_LIN2WD (uptr->pos, uptr);
ba = (blk * DTU_BSIZE (uptr)) + wrd;
if (dir) /* get data word */
fbuf[ba] = dt_comobv (dtdb);
else fbuf[ba] = dtdb;
if (ba >= uptr->hwmark)
uptr->hwmark = ba + 1;
if (wrd == (dir? 0: DTU_BSIZE (uptr) - 1))
dtsb = dtsb | DTB_BEF; /* end block */
else dtsb = dtsb | DTB_DTF; /* else next word */
}
else {
wrd = relpos / DT_WSIZE; /* hdr start = wd 0 */
#if defined (OLD_TYPE550)
if ((wrd == 0) || /* skip 1st, last */
(wrd == ((2 * DT_HTWRD) + DTU_BSIZE (uptr) - 1))) break;
#endif
if ((fnc == FNC_WRIT) && /* wr, skip if !csm */
(wrd != ((2 * DT_HTWRD) + DTU_BSIZE (uptr) - DT_CSMWD - 1)))
break;
dtsb = dtsb | DTB_DTF; /* set flag */
}
break;
#endif
default:
dt_seterr (uptr, DTB_SEL); /* impossible state */
break;
} /* end case function */
DT_UPDINT; /* update interrupts */
return SCPE_OK;
}
/* Utility routines */
/* Set error flag */
void dt_seterr (UNIT *uptr, int32 e)
{
dtsa = dtsa & ~DTA_STSTP; /* clear go */
dtsb = dtsb | DTB_ERF | e; /* set error flag */
if (uptr != NULL) { /* valid select? */
int32 mot = DTS_GETMOT (uptr->STATE); /* get motion */
if (mot >= DTS_ACCF) { /* ~stopped or stopping? */
sim_cancel (uptr); /* cancel activity */
if (dt_setpos (uptr)) /* update position */
return;
sim_activate (uptr, dt_dctime); /* sched decel */
DTS_SETSTA (DTS_DECF | (mot & DTS_DIR), 0); /* state = decel */
}
else DTS_SETSTA (mot, 0); /* clear 2nd, 3rd */
}
DT_UPDINT;
return;
}
/* Schedule end zone */
void dt_schedez (UNIT *uptr, int32 dir)
{
int32 newpos;
if (dir) /* rev? rev ez */
newpos = DT_EZLIN - DT_WSIZE;
else newpos = DTU_FWDEZ (uptr) + DT_WSIZE; /* fwd? fwd ez */
sim_activate (uptr, ABS (newpos - ((int32) uptr->pos)) * dt_ltime);
return;
}
/* Complement obverse routine */
int32 dt_comobv (int32 dat)
{
dat = dat ^ DMASK; /* compl obverse */
dat = ((dat >> 15) & 07) | ((dat >> 9) & 070) |
((dat >> 3) & 0700) | ((dat & 0700) << 3) |
((dat & 070) << 9) | ((dat & 07) << 15);
return dat;
}
/* Checksum routine */
int32 dt_csum (UNIT *uptr, int32 blk)
{
int32 *fbuf = (int32 *) uptr->filebuf;
int32 ba = blk * DTU_BSIZE (uptr);
int32 i, csum, wrd;
#if defined (TC02) /* TC02/TC15 */
csum = 077; /* init csum */
for (i = 0; i < DTU_BSIZE (uptr); i++) { /* loop thru buf */
wrd = fbuf[ba + i] ^ DMASK; /* get ~word */
csum = csum ^ (wrd >> 12) ^ (wrd >> 6) ^ wrd;
}
return (csum & 077);
#else /* Type 550 */
csum = 0777777;
for (i = 0; i < DTU_BSIZE (uptr); i++) { /* loop thru buf */
wrd = fbuf[ba + i]; /* get word */
csum = csum + wrd; /* 1's comp add */
if (csum > DMASK)
csum = (csum + 1) & DMASK;
}
return (csum ^ DMASK); /* 1's comp res */
#endif
}
/* Get header word */
int32 dt_gethdr (UNIT *uptr, int32 blk, int32 relpos)
{
int32 wrd = relpos / DT_WSIZE;
if (wrd == DT_BLKWD) /* fwd blknum */
return blk;
#if defined (TC02) /* TC02/TC15 */
if (wrd == DT_CSMWD) /* rev csum */
return 077;
if (wrd == ((2 * DT_HTWRD) + DTU_BSIZE (uptr) - DT_CSMWD - 1)) /* fwd csum */
return (dt_csum (uptr, blk) << 12);
#else /* Type 550 */
if (wrd == DT_CSMWD) /* rev csum */
return 0777777;
if (wrd == ((2 * DT_HTWRD) + DTU_BSIZE (uptr) - DT_CSMWD - 1)) /* fwd csum */
return (dt_csum (uptr, blk));
#endif
if (wrd == ((2 * DT_HTWRD) + DTU_BSIZE (uptr) - DT_BLKWD - 1)) /* rev blkno */
return dt_comobv (blk);
return 0; /* all others */
}
/* Reset routine */
t_stat dt_reset (DEVICE *dptr)
{
int32 i, prev_mot;
UNIT *uptr;
for (i = 0; i < DT_NUMDR; i++) { /* stop all drives */
uptr = dt_dev.units + i;
if (sim_is_running) { /* CAF? */
prev_mot = DTS_GETMOT (uptr->STATE); /* get motion */
if ((prev_mot & ~DTS_DIR) > DTS_DECF) { /* accel or spd? */
if (dt_setpos (uptr)) /* update pos */
continue;
sim_cancel (uptr);
sim_activate (uptr, dt_dctime); /* sched decel */
DTS_SETSTA (DTS_DECF | (prev_mot & DTS_DIR), 0);
}
}
else {
sim_cancel (uptr); /* sim reset */
uptr->STATE = 0;
uptr->LASTT = sim_grtime ();
}
}
dtsa = dtsb = 0; /* clear status */
DT_UPDINT; /* reset interrupt */
return SCPE_OK;
}
/* IORS routine */
int32 dt_iors (void)
{
#if defined IOS_DTA
return ((dtsb & (DTB_ERF | DTB_DTF))? IOS_DTA: 0);
#else
return 0;
#endif
}
/* Attach routine
Determine 12b, 16b, or 18b/36b format
Allocate buffer
If 12b, read 12b format and convert to 18b in buffer
If 16b, read 16b format and convert to 18b in buffer
If 18b/36b, read data into buffer
*/
t_stat dt_attach (UNIT *uptr, CONST char *cptr)
{
uint16 pdp8b[D8_NBSIZE];
uint16 pdp11b[D18_BSIZE];
uint32 ba, sz, k, *fbuf;
int32 u = uptr - dt_dev.units;
t_stat r;
r = attach_unit (uptr, cptr); /* attach */
if (r != SCPE_OK) /* error? */
return r;
if ((sim_switches & SIM_SW_REST) == 0) { /* not from rest? */
uptr->flags = uptr->flags & ~(UNIT_8FMT | UNIT_11FMT); /* default 18b */
if (sim_switches & SWMASK ('T')) /* att 12b? */
uptr->flags = uptr->flags | UNIT_8FMT;
else if (sim_switches & SWMASK ('S')) /* att 16b? */
uptr->flags = uptr->flags | UNIT_11FMT;
else if (!(sim_switches & SWMASK ('A')) && /* autosize? */
(sz = sim_fsize (uptr->fileref))) {
if (sz == D8_FILSIZ)
uptr->flags = uptr->flags | UNIT_8FMT;
else if (sz == D11_FILSIZ)
uptr->flags = uptr->flags | UNIT_11FMT;
}
}
uptr->capac = DTU_CAPAC (uptr); /* set capacity */
uptr->filebuf = calloc (uptr->capac, sizeof (uint32));
if (uptr->filebuf == NULL) { /* can't alloc? */
detach_unit (uptr);
return SCPE_MEM;
}
fbuf = (uint32 *) uptr->filebuf; /* file buffer */
sim_printf ("%s%d: ", sim_dname (&dt_dev), u);
if (uptr->flags & UNIT_8FMT)
sim_printf ("12b format");
else if (uptr->flags & UNIT_11FMT)
sim_printf ("16b format");
else sim_printf ("18b/36b format");
sim_printf (", buffering file in memory\n");
uptr->io_flush = dt_flush;
if (uptr->flags & UNIT_8FMT) { /* 12b? */
for (ba = 0; ba < uptr->capac; ) { /* loop thru file */
k = fxread (pdp8b, sizeof (uint16), D8_NBSIZE, uptr->fileref);
if (k == 0)
break;
for ( ; k < D8_NBSIZE; k++)
pdp8b[k] = 0;
for (k = 0; k < D8_NBSIZE; k = k + 3) { /* loop thru blk */
fbuf[ba] = ((uint32) (pdp8b[k] & 07777) << 6) |
((uint32) (pdp8b[k + 1] >> 6) & 077);
fbuf[ba + 1] = ((uint32) (pdp8b[k + 1] & 077) << 12) |
((uint32) pdp8b[k + 2] & 07777);
ba = ba + 2; /* end blk loop */
}
} /* end file loop */
uptr->hwmark = ba;
} /* end if */
else if (uptr->flags & UNIT_11FMT) { /* 16b? */
for (ba = 0; ba < uptr->capac; ) { /* loop thru file */
k = fxread (pdp11b, sizeof (uint16), D18_BSIZE, uptr->fileref);
if (k == 0)
break;
for ( ; k < D18_BSIZE; k++)
pdp11b[k] = 0;
for (k = 0; k < D18_BSIZE; k++)
fbuf[ba++] = pdp11b[k];
}
uptr->hwmark = ba;
} /* end elif */
else uptr->hwmark = fxread (uptr->filebuf, sizeof (uint32),
uptr->capac, uptr->fileref);
uptr->flags = uptr->flags | UNIT_BUF; /* set buf flag */
uptr->pos = DT_EZLIN; /* beyond leader */
uptr->LASTT = sim_grtime (); /* last pos update */
return SCPE_OK;
}
/* Detach routine
Cancel in progress operation
If 12b, convert 18b buffer to 12b and write to file
If 16b, convert 18b buffer to 16b and write to file
If 18b/36b, write buffer to file
Deallocate buffer
*/
void dt_flush (UNIT* uptr)
{
uint16 pdp8b[D8_NBSIZE];
uint16 pdp11b[D18_BSIZE];
int32 k;
uint32 ba, *fbuf;
if (uptr->WRITTEN && uptr->hwmark && ((uptr->flags & UNIT_RO)== 0)) { /* any data? */
rewind (uptr->fileref); /* start of file */
fbuf = (uint32 *) uptr->filebuf; /* file buffer */
if (uptr->flags & UNIT_8FMT) { /* 12b? */
for (ba = 0; ba < uptr->hwmark; ) { /* loop thru file */
for (k = 0; k < D8_NBSIZE; k = k + 3) { /* loop blk */
pdp8b[k] = (fbuf[ba] >> 6) & 07777;
pdp8b[k + 1] = ((fbuf[ba] & 077) << 6) |
((fbuf[ba + 1] >> 12) & 077);
pdp8b[k + 2] = fbuf[ba + 1] & 07777;
ba = ba + 2;
} /* end loop blk */
fxwrite (pdp8b, sizeof (uint16), D8_NBSIZE, uptr->fileref);
if (ferror (uptr->fileref))
break;
} /* end loop file */
} /* end if 12b */
else
if (uptr->flags & UNIT_11FMT) { /* 16b? */
for (ba = 0; ba < uptr->hwmark; ) { /* loop thru file */
for (k = 0; k < D18_BSIZE; k++) /* loop blk */
pdp11b[k] = fbuf[ba++] & 0177777;
fxwrite (pdp11b, sizeof (uint16), D18_BSIZE, uptr->fileref);
if (ferror (uptr->fileref))
break;
} /* end loop file */
} /* end if 16b */
else
fxwrite (uptr->filebuf, sizeof (uint32), /* write file */
uptr->hwmark, uptr->fileref);
if (ferror (uptr->fileref))
sim_perror ("I/O error");
}
uptr->WRITTEN = FALSE; /* no longer dirty */
}
t_stat dt_detach (UNIT* uptr)
{
int32 u = uptr - dt_dev.units;
if (!(uptr->flags & UNIT_ATT))
return SCPE_OK;
if (sim_is_active (uptr)) {
sim_cancel (uptr);
if ((u == DTA_GETUNIT (dtsa)) && (dtsa & DTA_STSTP)) {
dtsb = dtsb | DTB_ERF | DTB_SEL | DTB_DTF;
DT_UPDINT;
}
uptr->STATE = uptr->pos = 0;
}
if (uptr->hwmark && ((uptr->flags & UNIT_RO) == 0)) { /* any data? */
sim_printf ("%s%d: writing buffer to file\n", sim_dname (&dt_dev), u);
dt_flush (uptr);
} /* end if hwmark */
free (uptr->filebuf); /* release buf */
uptr->flags = uptr->flags & ~UNIT_BUF; /* clear buf flag */
uptr->filebuf = NULL; /* clear buf ptr */
uptr->flags = uptr->flags & ~(UNIT_8FMT | UNIT_11FMT); /* default fmt */
uptr->capac = DT_CAPAC; /* default size */
return detach_unit (uptr);
}