| /* 3b2_iu.h: SCN2681A Dual UART Header | |
| Copyright (c) 2017, Seth J. Morabito | |
| Permission is hereby granted, free of charge, to any person | |
| obtaining a copy of this software and associated documentation | |
| files (the "Software"), to deal in the Software without | |
| restriction, including without limitation the rights to use, copy, | |
| modify, merge, publish, distribute, sublicense, and/or sell copies | |
| of the Software, and to permit persons to whom the Software is | |
| furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be | |
| included in all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
| EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | |
| MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
| NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS | |
| BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN | |
| ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | |
| SOFTWARE. | |
| Except as contained in this notice, the name of the author shall | |
| not be used in advertising or otherwise to promote the sale, use or | |
| other dealings in this Software without prior written authorization | |
| from the author. | |
| */ | |
| #ifndef __3B2_IU_H__ | |
| #define __3B2_IU_H__ | |
| #include "3b2_defs.h" | |
| #include "3b2_sysdev.h" | |
| #define CMD_ERX 0x01 /* Enable receiver */ | |
| #define CMD_DRX 0x02 /* Disable receiver */ | |
| #define CMD_ETX 0x04 /* Enable transmitter */ | |
| #define CMD_DTX 0x08 /* Disable transmitter */ | |
| #define CMD_MISC_SHIFT 4 /* Command */ | |
| #define CMD_MISC_MASK 0x7 | |
| #define IU_SPEED_REGS 2 /* Two speed select registers, */ | |
| #define IU_SPEEDS 16 /* with 16 speeds each */ | |
| #define IU_PARITY_ODD 0 | |
| #define IU_PARITY_EVEN 1 | |
| #define IU_PARITY_NONE 2 | |
| #define STS_RXR 0x01 /* Receiver ready */ | |
| #define STS_FFL 0x02 /* FIFO full */ | |
| #define STS_TXR 0x04 /* Transmitter ready */ | |
| #define STS_TXE 0x08 /* Transmitter empty */ | |
| #define STS_OER 0x10 /* Overrun error */ | |
| #define STS_PER 0x20 /* Parity error */ | |
| #define STS_FER 0x40 /* Framing error */ | |
| #define STS_RXB 0x80 /* Received break */ | |
| #define ISTS_TAI 0x01 /* Transmitter ready A */ | |
| #define ISTS_RAI 0x02 /* Receiver ready A */ | |
| #define ISTS_CBA 0x04 /* Change in break A */ | |
| #define ISTS_CRI 0x08 /* Counter ready */ | |
| #define ISTS_TBI 0x10 /* Transmitter ready B */ | |
| #define ISTS_RBI 0x20 /* Receiver ready B */ | |
| #define ISTS_CBB 0x40 /* Change in break B */ | |
| #define ISTS_IPC 0x80 /* Interrupt port change */ | |
| #define MODE_V_CHM 6 /* Channel mode */ | |
| #define MODE_M_CHM 0x3 | |
| /* Used by the DMAC */ | |
| #define IUA_DATA_REG 3 | |
| #define IUB_DATA_REG 11 | |
| /* Registers - Read */ | |
| #define SRA 1 | |
| #define RHRA 3 | |
| #define IPCR 4 | |
| #define ISR 5 | |
| #define CTU 6 | |
| #define CTL 7 | |
| #define SRB 9 | |
| #define RHRB 11 | |
| #define INPRT 13 /* Input port data */ | |
| #define START_CTR 14 | |
| #define STOP_CTR 15 | |
| /* Registers - Write */ | |
| #define CSRA 1 | |
| #define CRA 2 | |
| #define THRA 3 | |
| #define ACR 4 | |
| #define IMR 5 | |
| #define CTUR 6 | |
| #define CTLR 7 | |
| #define CSRB 9 | |
| #define CRB 10 | |
| #define THRB 11 | |
| #define OPCR 13 | |
| #define SOPR 14 | |
| #define ROPR 15 | |
| /* Registers - R/W */ | |
| #define MR12A 0 | |
| #define MR12B 8 | |
| /* Port configuration */ | |
| #define TX_EN 1 | |
| #define RX_EN 2 | |
| #define UM_CTR_EXT 0 | |
| #define UM_CTR_TXCA 1 | |
| #define UM_CTR_TXCB 2 | |
| #define UM_CTR_DIV16 3 | |
| #define UM_TMR_EXT 4 | |
| #define UM_TMR_EXT16 5 | |
| #define UM_TMR_XTL 6 | |
| #define UM_TMR_XTL16 7 | |
| #define UM_MASK 0x70 | |
| #define UM_SHIFT 4 | |
| /* IMR bits */ | |
| #define IMR_TXRA 0x01 | |
| #define IMR_RXRA 0x02 | |
| #define IMR_CTR 0x08 | |
| #define IMR_TXRB 0x10 | |
| #define IMR_RXRB 0x20 | |
| /* Power-off bit */ | |
| #define IU_KILLPWR 0x04 | |
| #define PORT_A 0 | |
| #define PORT_B 1 | |
| #define IU_MODE(x) ((x & UM_MASK) >> UM_SHIFT) | |
| extern DEVICE tti_dev; | |
| extern DEVICE tto_dev; | |
| extern DEVICE contty_dev; | |
| extern DEVICE iu_timer_dev; | |
| #define IUBASE 0x49000 | |
| #define IUSIZE 0x100 | |
| #define IU_BUF_SIZE 3 | |
| #define IU_DCDA 0x01 | |
| #define IU_DCDB 0x02 | |
| #define IU_DTRA 0x01 | |
| #define IU_DTRB 0x02 | |
| #define DMA_NONE 0 | |
| #define DMA_VERIFY 1 | |
| #define DMA_WRITE 2 | |
| #define DMA_READ 4 | |
| /* Default baud rate generator (9600 baud) */ | |
| #define BRG_DEFAULT 11 | |
| #define IU_TIMER_RATE 2.114 /* microseconds per step */ | |
| typedef struct iu_port { | |
| uint8 stat; /* Port Status */ | |
| uint8 cmd; /* Command */ | |
| uint8 mode[2]; /* Two mode buffers */ | |
| uint8 modep; /* Point to mode[0] or mode[1] */ | |
| uint8 conf; /* Configuration bits */ | |
| uint8 txbuf; /* Transmit Holding Register */ | |
| uint8 rxbuf[IU_BUF_SIZE]; /* Receive Holding Register (3 bytes) */ | |
| uint8 w_p; /* Buffer Write Pointer */ | |
| uint8 r_p; /* Buffer Read Pointer */ | |
| uint8 dma; /* Currently active DMA mode */ | |
| t_bool drq; /* DMA request enabled */ | |
| } IU_PORT; | |
| typedef struct iu_state { | |
| uint8 istat; /* Interrupt Status */ | |
| uint8 imr; /* Interrupt Mask Register */ | |
| uint8 acr; | |
| uint8 opcr; /* Output Port Configuration */ | |
| uint8 inprt; /* Input Port Data */ | |
| uint8 ipcr; /* Input Port Change Register */ | |
| } IU_STATE; | |
| typedef struct iu_timer_state { | |
| uint16 c_set; | |
| t_bool c_en; | |
| } IU_TIMER_STATE; | |
| extern IU_PORT iu_console; | |
| extern IU_PORT iu_contty; | |
| /* Function prototypes */ | |
| t_stat contty_attach(UNIT *uptr, CONST char *cptr); | |
| t_stat contty_detach(UNIT *uptr); | |
| t_stat tti_reset(DEVICE *dptr); | |
| t_stat contty_reset(DEVICE *dptr); | |
| t_stat iu_timer_reset(DEVICE *dptr); | |
| t_stat iu_svc_tti(UNIT *uptr); | |
| t_stat iu_svc_tto(UNIT *uptr); | |
| t_stat iu_svc_contty_rcv(UNIT *uptr); | |
| t_stat iu_svc_contty_xmt(UNIT *uptr); | |
| t_stat iu_svc_timer(UNIT *uptr); | |
| t_stat iu_tx(uint8 portno, uint8 val); | |
| uint32 iu_read(uint32 pa, size_t size); | |
| void iu_write(uint32 pa, uint32 val, size_t size); | |
| void iua_drq_handled(); | |
| void iub_drq_handled(); | |
| void iu_txrdy_a_irq(); | |
| void iu_txrdy_b_irq(); | |
| void iu_dma_console(uint8 channel, uint32 service_address); | |
| void iu_dma_contty(uint8 channel, uint32 service_address); | |
| #endif |