blob: 0f8d56417264d04a9e9fd6a4d1e24c4fa9dbdc0a [file] [log] [blame] [raw]
/* sim_frontpanel.h: simulator frontpanel API definitions
Copyright (c) 2015, Mark Pizzolato
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
MARK PIZZOLATO BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Mark Pizzolato shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Mark Pizzolato.
15-Jan-15 MP Initial implementation
01-Apr-15 MP Added register indirect, mem_examine and mem_deposit
This module defines interface between a front panel application and a simh
simulator. Facilities provide ways to gather information from and to
observe and control the state of a simulator.
Any application which wants to use this API needs to:
1) include this file in the application code
2) compile sim_frontpanel.c and sim_sock.c from the top level directory
of the simh source.
3) link the sim_frontpanel and sim_sock object modules and libpthreads
into the application.
4) Use a simh simulator built from the same version of simh that the
sim_frontpanel and sim_sock modules came from.
*/
#ifndef SIM_FRONTPANEL_H_
#define SIM_FRONTPANEL_H_ 0
#ifdef __cplusplus
extern "C" {
#endif
#include <stdlib.h>
#if !defined(__VAX) /* Supported platform */
#define SIM_FRONTPANEL_VERSION 1
/**
sim_panel_start_simulator A starts a simulator with a particular
configuration
sim_path the path to the simulator binary
sim_config the configuration to run the simulator with
device_panel_count the number of sub panels for connected devices
Note 1: - The path specified must be either a fully specified path or
it could be merey the simulator name if the simulator binary
is located in the current PATH.
- The simulator binary must be built from the same version
simh source code that the frontpanel API was acquired fron
(the API and the simh framework must speak the same language)
Note 2: - Configuration file specified should contain device setup
statements (enable, disable, CPU types and attach commands).
It should not start a simulator running.
*/
typedef struct PANEL PANEL;
PANEL *
sim_panel_start_simulator (const char *sim_path,
const char *sim_config,
size_t device_panel_count);
PANEL *
sim_panel_start_simulator_debug (const char *sim_path,
const char *sim_config,
size_t device_panel_count,
const char *debug_file);
/**
sim_panel_add_device_panel - creates a sub panel associated
with a specific simulator panel
simulator_panel the simulator panel to connect to
device_name the simulator's name for the device
*/
PANEL *
sim_panel_add_device_panel (PANEL *simulator_panel,
const char *device_name);
/**
sim_panel_destroy to shutdown a panel or sub panel.
Note: destroying a simulator panel will also destroy any
related sub panels
*/
int
sim_panel_destroy (PANEL *panel);
/**
The frontpanel API exposes the state of a simulator via access to
simh register variables that the simulator and its devices define.
These registers certainly include any architecturally described
registers (PC, PSL, SP, etc.), but also include anything else
the simulator uses as internal state to implement the running
simulator.
The registers that a particular frontpanel application mught need
access to are described by the application by calling:
sim_panel_add_register
and
sim_panel_add_register_indirect
name the name the simulator knows this register by
device_name the device this register is part of. Defaults to
the device of the panel (in a device panel) or the
default device in the simulator (usually the CPU).
size the size (in local storage) of the buffer which will
receive the data in the simulator's register
addr a pointer to the location of the buffer which will
be loaded with the data in the simulator's register
*/
int
sim_panel_add_register (PANEL *panel,
const char *name,
const char *device_name,
size_t size,
void *addr);
int
sim_panel_add_register_indirect (PANEL *panel,
const char *name,
const char *device_name,
size_t size,
void *addr);
/**
A panel application has a choice of two different methods of getting
the values contained in the set of registers it has declared interest in via
the sim_panel_add_register API.
1) The values can be polled (when ever it is desired) by calling
sim_panel_get_registers().
2) The panel can call sim_panel_set_display_callback() to specify a
callback routine and a periodic rate that the callback routine
should be called. The panel API will make a best effort to deliver
the current register state at the desired rate.
Note 1: The buffers described in a panel's register set will be dynamically
revised as soon as data is available from the simulator. The
callback routine merely serves as a notification that a complete
register set has arrived.
*/
int
sim_panel_get_registers (PANEL *panel, unsigned long long *simulation_time);
/**
*/
typedef void (*PANEL_DISPLAY_PCALLBACK)(PANEL *panel,
unsigned long long simulation_time,
void *context);
int
sim_panel_set_display_callback (PANEL *panel,
PANEL_DISPLAY_PCALLBACK callback,
void *context,
int callbacks_per_second);
/**
When a front panel application needs to change the running
state of a simulator one of the following routines should
be called:
sim_panel_exec_halt - Stop instruction execution
sim_panel_exec_boot - Boot a simulator from a specific device
sim_panel_exec_run - Start/Resume a simulator running instructions
sim_panel_exec_step - Have a simulator execute a single step
*/
int
sim_panel_exec_halt (PANEL *panel);
int
sim_panel_exec_boot (PANEL *panel, const char *device);
int
sim_panel_exec_run (PANEL *panel);
int
sim_panel_exec_step (PANEL *panel);
/**
When a front panel application needs to change or access
memory or a register one of the following routines should
be called:
sim_panel_gen_examine - Examine register or memory
sim_panel_gen_deposit - Deposit to register or memory
sim_panel_mem_examine - Examine memory location
sim_panel_mem_deposit - Deposit to memory location
sim_panel_set_register_value -
*/
/**
sim_panel_gen_examine
name_or_addr the name the simulator knows this register by
size the size (in local storage) of the buffer which will
receive the data returned when examining the simulator
value a pointer to the buffer which will be loaded with the
data returned when examining the simulator
*/
int
sim_panel_gen_examine (PANEL *panel,
const char *name_or_addr,
size_t size,
void *value);
/**
sim_panel_gen_deposit
name_or_addr the name the simulator knows this register by
size the size (in local storage) of the buffer which
contains the data to be deposited into the simulator
value a pointer to the buffer which contains the data to
be deposited into the simulator
*/
int
sim_panel_gen_deposit (PANEL *panel,
const char *name_or_addr,
size_t size,
const void *value);
/**
sim_panel_mem_examine
addr_size the size (in local storage) of the buffer which
contains the memory address of the data to be examined
in the simulator
addr a pointer to the buffer containing the memory address
of the data to be examined in the simulator
value_size the size (in local storage) of the buffer which will
receive the data returned when examining the simulator
value a pointer to the buffer which will be loaded with the
data returned when examining the simulator
*/
int
sim_panel_mem_examine (PANEL *panel,
size_t addr_size,
const void *addr,
size_t value_size,
void *value);
/**
sim_panel_mem_deposit
addr_size the size (in local storage) of the buffer which
contains the memory address of the data to be deposited
into the simulator
addr a pointer to the buffer containing the memory address
of the data to be deposited into the simulator
value_size the size (in local storage) of the buffer which will
contains the data to be deposited into the simulator
value a pointer to the buffer which contains the data to be
deposited into the simulator
*/
int
sim_panel_mem_deposit (PANEL *panel,
size_t addr_size,
const void *addr,
size_t value_size,
const void *value);
/**
sim_panel_set_register_value
name the name of a simulator register or a memory address
which is to receive a new value
value the new value in character string form. The string
must be in the native/natural radix that the simulator
uses when referencing that register
*/
int
sim_panel_set_register_value (PANEL *panel,
const char *name,
const char *value);
typedef enum {
Halt, /* Simulation is halted (instructions not being executed) */
Run, /* Simulation is executing instructions */
Error /* Panel simulator is in an error state and should be */
/* closed (destroyed). sim_panel_get_error might help */
/* explain why */
} OperationalState;
OperationalState
sim_panel_get_state (PANEL *panel);
/**
All APIs routines which return an int return 0 for
success and -1 for an error.
sim_panel_get_error - the details of the most recent error
sim_panel_clear_error - clears the error buffer
*/
const char *sim_panel_get_error (void);
void sim_panel_clear_error (void);
/**
The panek<->simulator wire protocol can be traced if protocol problems arise.
sim_panel_set_debug_file - Specifies the log file to record debug traffic
sim_panel_set_debug_mode - Specifies the debug detail to be recorded
sim_panel_flush_debug - Flushes debug output to disk
*/
void
sim_panel_set_debug_file (PANEL *panel, const char *debug_file);
#define DBG_XMT 1 /* Transmit Data */
#define DBG_RCV 2 /* Receive Data */
void
sim_panel_set_debug_mode (PANEL *panel, int debug_bits);
void
sim_panel_flush_debug (PANEL *panel);
#endif /* !defined(__VAX) */
#ifdef __cplusplus
}
#endif
#endif /* SIM_FRONTPANEL_H_ */