blob: 7a51df0d91db5721958b4a99828178b47d718a99 [file] [log] [blame] [raw]
/* pdp8_rx.c: RX8E/RX01, RX28/RX02 floppy disk simulator
Copyright (c) 1993-2011, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
rx RX8E/RX01, RX28/RX02 floppy disk
15-May-06 RMS Fixed bug in autosize attach (Dave Gesswein)
04-Jan-04 RMS Changed sim_fsize calling sequence
05-Nov-03 RMS Fixed bug in RX28 read status (Charles Dickman)
26-Oct-03 RMS Cleaned up buffer copy code, fixed double density write
25-Apr-03 RMS Revised for extended file support
14-Mar-03 RMS Fixed variable size interaction with save/restore
03-Mar-03 RMS Fixed autosizing
08-Oct-02 RMS Added DIB, device number support
Fixed reset to work with disabled device
15-Sep-02 RMS Added RX28/RX02 support
06-Jan-02 RMS Changed enable/disable support
30-Nov-01 RMS Added read only unit, extended SET/SHOW support
24-Nov-01 RMS Converted FLG to array
17-Jul-01 RMS Fixed warning from VC++ 6
26-Apr-01 RMS Added device enable/disable support
13-Apr-01 RMS Revised for register arrays
14-Apr-99 RMS Changed t_addr to unsigned
15-Aug-96 RMS Fixed bug in LCD
An RX01 diskette consists of 77 tracks, each with 26 sectors of 128B.
An RX02 diskette consists of 77 tracks, each with 26 sectors of 128B
(single density) or 256B (double density). Tracks are numbered 0-76,
sectors 1-26. The RX8E (RX28) can store data in 8b mode or 12b mode.
In 8b mode, the controller reads or writes 128 bytes (128B or 256B)
per sector. In 12b mode, it reads or writes 64 (64 or 128) 12b words
per sector. The 12b words are bit packed into the first 96 (192) bytes
of the sector; the last 32 (64) bytes are zeroed on writes.
*/
#include "pdp8_defs.h"
#define RX_NUMTR 77 /* tracks/disk */
#define RX_M_TRACK 0377
#define RX_NUMSC 26 /* sectors/track */
#define RX_M_SECTOR 0177 /* cf Jones!! */
#define RX_NUMBY 128 /* bytes/sector */
#define RX2_NUMBY 256
#define RX_NUMWD (RX_NUMBY / 2) /* words/sector */
#define RX2_NUMWD (RX2_NUMBY / 2)
#define RX_SIZE (RX_NUMTR * RX_NUMSC * RX_NUMBY) /* bytes/disk */
#define RX2_SIZE (RX_NUMTR * RX_NUMSC * RX2_NUMBY)
#define RX_NUMDR 2 /* drives/controller */
#define RX_M_NUMDR 01
#define UNIT_V_WLK (UNIT_V_UF + 0) /* write locked */
#define UNIT_V_DEN (UNIT_V_UF + 1) /* double density */
#define UNIT_V_AUTO (UNIT_V_UF + 2) /* autosize */
#define UNIT_WLK (1u << UNIT_V_WLK)
#define UNIT_DEN (1u << UNIT_V_DEN)
#define UNIT_AUTO (1u << UNIT_V_AUTO)
#define UNIT_WPRT (UNIT_WLK | UNIT_RO) /* write protect */
#define IDLE 0 /* idle state */
#define CMD8 1 /* 8b cmd, ho next */
#define RWDS 2 /* rw, sect next */
#define RWDT 3 /* rw, track next */
#define RWXFR 4 /* rw, transfer */
#define FILL 5 /* fill buffer */
#define EMPTY 6 /* empty buffer */
#define SDCNF 7 /* set dens, conf next */
#define SDXFR 8 /* set dens, transfer */
#define CMD_COMPLETE 9 /* set done next */
#define INIT_COMPLETE 10 /* init compl next */
#define RXCS_V_FUNC 1 /* function */
#define RXCS_M_FUNC 7
#define RXCS_FILL 0 /* fill buffer */
#define RXCS_EMPTY 1 /* empty buffer */
#define RXCS_WRITE 2 /* write sector */
#define RXCS_READ 3 /* read sector */
#define RXCS_SDEN 4 /* set density (RX28) */
#define RXCS_RXES 5 /* read status */
#define RXCS_WRDEL 6 /* write del data */
#define RXCS_ECODE 7 /* read error code */
#define RXCS_DRV 0020 /* drive */
#define RXCS_MODE 0100 /* mode */
#define RXCS_MAINT 0200 /* maintenance */
#define RXCS_DEN 0400 /* density (RX28) */
#define RXCS_GETFNC(x) (((x) >> RXCS_V_FUNC) & RXCS_M_FUNC)
#define RXES_CRC 0001 /* CRC error NI */
#define RXES_ID 0004 /* init done */
#define RXES_RX02 0010 /* RX02 (RX28) */
#define RXES_DERR 0020 /* density err (RX28) */
#define RXES_DEN 0040 /* density (RX28) */
#define RXES_DD 0100 /* deleted data */
#define RXES_DRDY 0200 /* drive ready */
#define TRACK u3 /* current track */
#define READ_RXDBR ((rx_csr & RXCS_MODE)? AC | (rx_dbr & 0377): rx_dbr)
#define CALC_DA(t,s,b) (((t) * RX_NUMSC) + ((s) - 1)) * b
extern int32 int_req, int_enable, dev_done;
int32 rx_28 = 0; /* controller type */
int32 rx_tr = 0; /* xfer ready flag */
int32 rx_err = 0; /* error flag */
int32 rx_csr = 0; /* control/status */
int32 rx_dbr = 0; /* data buffer */
int32 rx_esr = 0; /* error status */
int32 rx_ecode = 0; /* error code */
int32 rx_track = 0; /* desired track */
int32 rx_sector = 0; /* desired sector */
int32 rx_state = IDLE; /* controller state */
int32 rx_cwait = 100; /* command time */
int32 rx_swait = 10; /* seek, per track */
int32 rx_xwait = 1; /* tr set time */
int32 rx_stopioe = 0; /* stop on error */
uint8 rx_buf[RX2_NUMBY] = { 0 }; /* sector buffer */
int32 rx_bptr = 0; /* buffer pointer */
DEVICE rx_dev;
int32 rx (int32 IR, int32 AC);
t_stat rx_svc (UNIT *uptr);
t_stat rx_reset (DEVICE *dptr);
t_stat rx_boot (int32 unitno, DEVICE *dptr);
t_stat rx_set_size (UNIT *uptr, int32 val, char *cptr, void *desc);
t_stat rx_attach (UNIT *uptr, char *cptr);
void rx_cmd (void);
void rx_done (int32 esr_flags, int32 new_ecode);
t_stat rx_settype (UNIT *uptr, int32 val, char *cptr, void *desc);
t_stat rx_showtype (FILE *st, UNIT *uptr, int32 val, void *desc);
/* RX8E data structures
rx_dev RX device descriptor
rx_unit RX unit list
rx_reg RX register list
rx_mod RX modifier list
*/
DIB rx_dib = { DEV_RX, 1, { &rx } };
UNIT rx_unit[] = {
{ UDATA (&rx_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_BUFABLE+UNIT_MUSTBUF+
UNIT_ROABLE, RX_SIZE) },
{ UDATA (&rx_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_BUFABLE+UNIT_MUSTBUF+
UNIT_ROABLE, RX_SIZE) }
};
REG rx_reg[] = {
{ ORDATA (RXCS, rx_csr, 12) },
{ ORDATA (RXDB, rx_dbr, 12) },
{ ORDATA (RXES, rx_esr, 12) },
{ ORDATA (RXERR, rx_ecode, 8) },
{ ORDATA (RXTA, rx_track, 8) },
{ ORDATA (RXSA, rx_sector, 8) },
{ DRDATA (STAPTR, rx_state, 4), REG_RO },
{ DRDATA (BUFPTR, rx_bptr, 8) },
{ FLDATA (TR, rx_tr, 0) },
{ FLDATA (ERR, rx_err, 0) },
{ FLDATA (DONE, dev_done, INT_V_RX) },
{ FLDATA (ENABLE, int_enable, INT_V_RX) },
{ FLDATA (INT, int_req, INT_V_RX) },
{ DRDATA (CTIME, rx_cwait, 24), PV_LEFT },
{ DRDATA (STIME, rx_swait, 24), PV_LEFT },
{ DRDATA (XTIME, rx_xwait, 24), PV_LEFT },
{ FLDATA (STOP_IOE, rx_stopioe, 0) },
{ BRDATA (SBUF, rx_buf, 8, 8, RX2_NUMBY) },
{ FLDATA (RX28, rx_28, 0), REG_HRO },
{ URDATA (CAPAC, rx_unit[0].capac, 10, T_ADDR_W, 0,
RX_NUMDR, REG_HRO | PV_LEFT) },
{ ORDATA (DEVNUM, rx_dib.dev, 6), REG_HRO },
{ NULL }
};
MTAB rx_mod[] = {
{ UNIT_WLK, 0, "write enabled", "WRITEENABLED", NULL },
{ UNIT_WLK, UNIT_WLK, "write locked", "LOCKED", NULL },
{ MTAB_XTD | MTAB_VDV, 1, NULL, "RX28", &rx_settype, NULL, NULL },
{ MTAB_XTD | MTAB_VDV, 0, NULL, "RX8E", &rx_settype, NULL, NULL },
{ MTAB_XTD | MTAB_VDV, 0, "TYPE", NULL, NULL, &rx_showtype, NULL },
{ (UNIT_DEN+UNIT_ATT), UNIT_ATT, "single density", NULL, NULL },
{ (UNIT_DEN+UNIT_ATT), (UNIT_DEN+UNIT_ATT), "double density", NULL, NULL },
{ (UNIT_AUTO+UNIT_DEN+UNIT_ATT), 0, "single density", NULL, NULL },
{ (UNIT_AUTO+UNIT_DEN+UNIT_ATT), UNIT_DEN, "double density", NULL, NULL },
{ (UNIT_AUTO+UNIT_ATT), UNIT_AUTO, "autosize", NULL, NULL },
{ UNIT_AUTO, UNIT_AUTO, NULL, "AUTOSIZE", NULL },
{ (UNIT_AUTO+UNIT_DEN), 0, NULL, "SINGLE", &rx_set_size },
{ (UNIT_AUTO+UNIT_DEN), UNIT_DEN, NULL, "DOUBLE", &rx_set_size },
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO",
&set_dev, &show_dev, NULL },
{ 0 }
};
DEVICE rx_dev = {
"RX", rx_unit, rx_reg, rx_mod,
RX_NUMDR, 8, 20, 1, 8, 8,
NULL, NULL, &rx_reset,
&rx_boot, &rx_attach, NULL,
&rx_dib, DEV_DISABLE
};
/* IOT routine */
int32 rx (int32 IR, int32 AC)
{
int32 drv = ((rx_csr & RXCS_DRV)? 1: 0); /* get drive number */
switch (IR & 07) { /* decode IR<9:11> */
case 0: /* unused */
break;
case 1: /* LCD */
if (rx_state != IDLE) /* ignore if busy */
return AC;
dev_done = dev_done & ~INT_RX; /* clear done, int */
int_req = int_req & ~INT_RX;
rx_tr = rx_err = 0; /* clear flags */
rx_bptr = 0; /* clear buf pointer */
if (rx_28 && (AC & RXCS_MODE)) { /* RX28 8b mode? */
rx_dbr = rx_csr = AC & 0377; /* save 8b */
rx_tr = 1; /* xfer is ready */
rx_state = CMD8; /* wait for part 2 */
}
else {
rx_dbr = rx_csr = AC; /* save new command */
rx_cmd (); /* issue command */
}
return 0; /* clear AC */
case 2: /* XDR */
switch (rx_state & 017) { /* case on state */
case EMPTY: /* emptying buffer */
sim_activate (&rx_unit[drv], rx_xwait); /* sched xfer */
return READ_RXDBR; /* return data reg */
case CMD8: /* waiting for cmd */
rx_dbr = AC & 0377;
rx_csr = (rx_csr & 0377) | ((AC & 017) << 8);
rx_cmd ();
break;
case RWDS:case RWDT:case FILL:case SDCNF: /* waiting for data */
rx_dbr = AC; /* save data */
sim_activate (&rx_unit[drv], rx_xwait); /* schedule */
break;
default: /* default */
return READ_RXDBR; /* return data reg */
}
break;
case 3: /* STR */
if (rx_tr != 0) {
rx_tr = 0;
return IOT_SKP + AC;
}
break;
case 4: /* SER */
if (rx_err != 0) {
rx_err = 0;
return IOT_SKP + AC;
}
break;
case 5: /* SDN */
if ((dev_done & INT_RX) != 0) {
dev_done = dev_done & ~INT_RX;
int_req = int_req & ~INT_RX;
return IOT_SKP + AC;
}
break;
case 6: /* INTR */
if (AC & 1)
int_enable = int_enable | INT_RX;
else int_enable = int_enable & ~INT_RX;
int_req = INT_UPDATE;
break;
case 7: /* INIT */
rx_reset (&rx_dev); /* reset device */
break;
} /* end case pulse */
return AC;
}
void rx_cmd (void)
{
int32 drv = ((rx_csr & RXCS_DRV)? 1: 0); /* get drive number */
switch (RXCS_GETFNC (rx_csr)) { /* decode command */
case RXCS_FILL:
rx_state = FILL; /* state = fill */
rx_tr = 1; /* xfer is ready */
rx_esr = rx_esr & RXES_ID; /* clear errors */
break;
case RXCS_EMPTY:
rx_state = EMPTY; /* state = empty */
rx_esr = rx_esr & RXES_ID; /* clear errors */
sim_activate (&rx_unit[drv], rx_xwait); /* sched xfer */
break;
case RXCS_READ: case RXCS_WRITE: case RXCS_WRDEL:
rx_state = RWDS; /* state = get sector */
rx_tr = 1; /* xfer is ready */
rx_esr = rx_esr & RXES_ID; /* clear errors */
break;
case RXCS_SDEN:
if (rx_28) { /* RX28? */
rx_state = SDCNF; /* state = get conf */
rx_tr = 1; /* xfer is ready */
rx_esr = rx_esr & RXES_ID; /* clear errors */
break;
} /* else fall thru */
default:
rx_state = CMD_COMPLETE; /* state = cmd compl */
sim_activate (&rx_unit[drv], rx_cwait); /* sched done */
break;
} /* end switch func */
return;
}
/* Unit service; the action to be taken depends on the transfer state:
IDLE Should never get here
RWDS Save sector, set TR, set RWDT
RWDT Save track, set RWXFR
RWXFR Read/write buffer
FILL copy dbr to rx_buf[rx_bptr], advance ptr
if rx_bptr > max, finish command, else set tr
EMPTY if rx_bptr > max, finish command, else
copy rx_buf[rx_bptr] to dbr, advance ptr, set tr
CMD_COMPLETE copy requested data to dbr, finish command
INIT_COMPLETE read drive 0, track 1, sector 1 to buffer, finish command
For RWDT and CMD_COMPLETE, the input argument is the selected drive;
otherwise, it is drive 0.
*/
t_stat rx_svc (UNIT *uptr)
{
int32 i, func, byptr, bps, wps;
int8 *fbuf = uptr->filebuf;
uint32 da;
#define PTR12(x) (((x) + (x) + (x)) >> 1)
if (rx_28 && (uptr->flags & UNIT_DEN)) /* RX28 and double density? */
bps = RX2_NUMBY; /* double bytes/sector */
else bps = RX_NUMBY; /* RX8E, normal count */
wps = bps / 2;
func = RXCS_GETFNC (rx_csr); /* get function */
switch (rx_state) { /* case on state */
case IDLE: /* idle */
return SCPE_IERR;
case EMPTY: /* empty buffer */
if (rx_csr & RXCS_MODE) { /* 8b xfer? */
if (rx_bptr >= bps) { /* done? */
rx_done (0, 0); /* set done */
break; /* and exit */
}
rx_dbr = rx_buf[rx_bptr]; /* else get data */
}
else {
byptr = PTR12 (rx_bptr); /* 12b xfer */
if (rx_bptr >= wps) { /* done? */
rx_done (0, 0); /* set done */
break; /* and exit */
}
rx_dbr = (rx_bptr & 1)? /* get data */
((rx_buf[byptr] & 017) << 8) | rx_buf[byptr + 1]:
(rx_buf[byptr] << 4) | ((rx_buf[byptr + 1] >> 4) & 017);
}
rx_bptr = rx_bptr + 1;
rx_tr = 1;
break;
case FILL: /* fill buffer */
if (rx_csr & RXCS_MODE) { /* 8b xfer? */
rx_buf[rx_bptr] = rx_dbr; /* fill buffer */
rx_bptr = rx_bptr + 1;
if (rx_bptr < bps) /* if more, set xfer */
rx_tr = 1;
else rx_done (0, 0); /* else done */
}
else {
byptr = PTR12 (rx_bptr); /* 12b xfer */
if (rx_bptr & 1) { /* odd or even? */
rx_buf[byptr] = (rx_buf[byptr] & 0360) | ((rx_dbr >> 8) & 017);
rx_buf[byptr + 1] = rx_dbr & 0377;
}
else {
rx_buf[byptr] = (rx_dbr >> 4) & 0377;
rx_buf[byptr + 1] = (rx_dbr & 017) << 4;
}
rx_bptr = rx_bptr + 1;
if (rx_bptr < wps) /* if more, set xfer */
rx_tr = 1;
else {
for (i = PTR12 (wps); i < bps; i++)
rx_buf[i] = 0; /* else fill sector */
rx_done (0, 0); /* set done */
}
}
break;
case RWDS: /* wait for sector */
rx_sector = rx_dbr & RX_M_SECTOR; /* save sector */
rx_tr = 1; /* set xfer ready */
rx_state = RWDT; /* advance state */
return SCPE_OK;
case RWDT: /* wait for track */
rx_track = rx_dbr & RX_M_TRACK; /* save track */
rx_state = RWXFR;
sim_activate (uptr, /* sched done */
rx_swait * abs (rx_track - uptr->TRACK));
return SCPE_OK;
case RWXFR: /* transfer */
if ((uptr->flags & UNIT_BUF) == 0) { /* not buffered? */
rx_done (0, 0110); /* done, error */
return IORETURN (rx_stopioe, SCPE_UNATT);
}
if (rx_track >= RX_NUMTR) { /* bad track? */
rx_done (0, 0040); /* done, error */
break;
}
uptr->TRACK = rx_track; /* now on track */
if ((rx_sector == 0) || (rx_sector > RX_NUMSC)) { /* bad sect? */
rx_done (0, 0070); /* done, error */
break;
}
if (rx_28 && /* RX28? */
(((uptr->flags & UNIT_DEN) != 0) ^
((rx_csr & RXCS_DEN) != 0))) { /* densities agree? */
rx_done (RXES_DERR, 0240); /* no, error */
break;
}
da = CALC_DA (rx_track, rx_sector, bps); /* get disk address */
if (func == RXCS_WRDEL) /* del data? */
rx_esr = rx_esr | RXES_DD;
if (func == RXCS_READ) { /* read? */
for (i = 0; i < bps; i++) rx_buf[i] = fbuf[da + i];
}
else { /* write */
if (uptr->flags & UNIT_WPRT) { /* locked? */
rx_done (0, 0100); /* done, error */
break;
}
for (i = 0; i < bps; i++)
fbuf[da + i] = rx_buf[i];
da = da + bps;
if (da > uptr->hwmark)
uptr->hwmark = da;
}
rx_done (0, 0); /* done */
break;
case SDCNF: /* confirm set density */
if ((rx_dbr & 0377) != 0111) { /* confirmed? */
rx_done (0, 0250); /* no, error */
break;
}
rx_state = SDXFR; /* next state */
sim_activate (uptr, rx_cwait * 100); /* schedule operation */
break;
case SDXFR: /* erase disk */
for (i = 0; i < (int32) uptr->capac; i++)
fbuf[i] = 0;
uptr->hwmark = uptr->capac;
if (rx_csr & RXCS_DEN)
uptr->flags = uptr->flags | UNIT_DEN;
else uptr->flags = uptr->flags & ~UNIT_DEN;
rx_done (0, 0);
break;
case CMD_COMPLETE: /* command complete */
if (func == RXCS_ECODE) { /* read ecode? */
rx_dbr = rx_ecode; /* set dbr */
rx_done (0, -1); /* don't update */
}
else if (rx_28) { /* no, read sta; RX28? */
rx_esr = rx_esr & ~RXES_DERR; /* assume dens match */
if (((uptr->flags & UNIT_DEN) != 0) ^ /* densities mismatch? */
((rx_csr & RXCS_DEN) != 0))
rx_done (RXES_DERR, 0240); /* yes, error */
else rx_done (0, 0); /* no, ok */
}
else rx_done (0, 0); /* RX8E status */
break;
case INIT_COMPLETE: /* init complete */
rx_unit[0].TRACK = 1; /* drive 0 to trk 1 */
rx_unit[1].TRACK = 0; /* drive 1 to trk 0 */
if ((rx_unit[0].flags & UNIT_BUF) == 0) { /* not buffered? */
rx_done (RXES_ID, 0010); /* init done, error */
break;
}
da = CALC_DA (1, 1, bps); /* track 1, sector 1 */
for (i = 0; i < bps; i++) /* read sector */
rx_buf[i] = fbuf[da + i];
rx_done (RXES_ID, 0); /* set done */
if ((rx_unit[1].flags & UNIT_ATT) == 0)
rx_ecode = 0020;
break;
} /* end case state */
return SCPE_OK;
}
/* Command complete. Set done and put final value in interface register,
return to IDLE state.
*/
void rx_done (int32 esr_flags, int32 new_ecode)
{
int32 drv = (rx_csr & RXCS_DRV)? 1: 0;
rx_state = IDLE; /* now idle */
dev_done = dev_done | INT_RX; /* set done */
int_req = INT_UPDATE; /* update ints */
rx_esr = (rx_esr | esr_flags) & ~(RXES_DRDY|RXES_RX02|RXES_DEN);
if (rx_28) /* RX28? */
rx_esr = rx_esr | RXES_RX02;
if (rx_unit[drv].flags & UNIT_ATT) { /* update drv rdy */
rx_esr = rx_esr | RXES_DRDY;
if (rx_unit[drv].flags & UNIT_DEN) /* update density */
rx_esr = rx_esr | RXES_DEN;
}
if (new_ecode > 0) /* test for error */
rx_err = 1;
if (new_ecode < 0) /* don't update? */
return;
rx_ecode = new_ecode; /* update ecode */
rx_dbr = rx_esr; /* update RXDB */
return;
}
/* Reset routine. The RX is one of the few devices that schedules
an I/O transfer as part of its initialization */
t_stat rx_reset (DEVICE *dptr)
{
rx_dbr = rx_csr = 0; /* 12b mode, drive 0 */
rx_esr = rx_ecode = 0; /* clear error */
rx_tr = rx_err = 0; /* clear flags */
rx_track = rx_sector = 0; /* clear address */
rx_state = IDLE; /* ctrl idle */
dev_done = dev_done & ~INT_RX; /* clear done, int */
int_req = int_req & ~INT_RX;
int_enable = int_enable & ~INT_RX;
sim_cancel (&rx_unit[1]); /* cancel drive 1 */
if (dptr->flags & DEV_DIS) /* disabled? */
sim_cancel (&rx_unit[0]);
else if (rx_unit[0].flags & UNIT_BUF) { /* attached? */
rx_state = INIT_COMPLETE; /* yes, sched init */
sim_activate (&rx_unit[0], rx_swait * abs (1 - rx_unit[0].TRACK));
}
else rx_done (rx_esr | RXES_ID, 0010); /* no, error */
return SCPE_OK;
}
/* Attach routine */
t_stat rx_attach (UNIT *uptr, char *cptr)
{
uint32 sz;
if ((uptr->flags & UNIT_AUTO) && (sz = sim_fsize_name (cptr))) {
if (sz > RX_SIZE)
uptr->flags = uptr->flags | UNIT_DEN;
else uptr->flags = uptr->flags & ~UNIT_DEN;
}
uptr->capac = (uptr->flags & UNIT_DEN)? RX2_SIZE: RX_SIZE;
return attach_unit (uptr, cptr);
}
/* Set size routine */
t_stat rx_set_size (UNIT *uptr, int32 val, char *cptr, void *desc)
{
if (uptr->flags & UNIT_ATT)
return SCPE_ALATT;
if ((rx_28 == 0) && val) /* not on RX8E */
return SCPE_NOFNC;
uptr->capac = val? RX2_SIZE: RX_SIZE;
return SCPE_OK;
}
/* Set controller type */
t_stat rx_settype (UNIT *uptr, int32 val, char *cptr, void *desc)
{
int32 i;
if ((val < 0) || (val > 1) || (cptr != NULL))
return SCPE_ARG;
if (val == rx_28)
return SCPE_OK;
for (i = 0; i < RX_NUMDR; i++) {
if (rx_unit[i].flags & UNIT_ATT)
return SCPE_ALATT;
}
for (i = 0; i < RX_NUMDR; i++) {
if (val)
rx_unit[i].flags = rx_unit[i].flags | UNIT_DEN | UNIT_AUTO;
else rx_unit[i].flags = rx_unit[i].flags & ~(UNIT_DEN | UNIT_AUTO);
rx_unit[i].capac = val? RX2_SIZE: RX_SIZE;
}
rx_28 = val;
return SCPE_OK;
}
/* Show controller type */
t_stat rx_showtype (FILE *st, UNIT *uptr, int32 val, void *desc)
{
if (rx_28) fprintf (st, "RX28");
else fprintf (st, "RX8E");
return SCPE_OK;
}
/* Bootstrap routine */
#define BOOT_START 022
#define BOOT_ENTRY 022
#define BOOT_INST 060
#define BOOT_LEN (sizeof (boot_rom) / sizeof (int16))
#define BOOT2_START 020
#define BOOT2_ENTRY 033
#define BOOT2_LEN (sizeof (boot2_rom) / sizeof (int16))
static const uint16 boot_rom[] = {
06755, /* 22, SDN */
05022, /* 23, JMP .-1 */
07126, /* 24, CLL CML RTL ; read command + */
01060, /* 25, TAD UNIT ; unit no */
06751, /* 26, LCD ; load read+unit */
07201, /* 27, CLA IAC ; AC = 1 */
04053, /* 30, JMS LOAD ; load sector */
04053, /* 31, JMS LOAD ; load track */
07104, /* 32, CLL RAL ; AC = 2 */
06755, /* 33, SDN */
05054, /* 34, JMP LOAD+1 */
06754, /* 35, SER */
07450, /* 36, SNA ; more to do? */
07610, /* 37, CLA SKP ; error */
05046, /* 40, JMP 46 ; go empty */
07402, /* 41-45, HALT ; error */
07402,
07402,
07402,
07402,
06751, /* 46, LCD ; load empty */
04053, /* 47, JMS LOAD ; get data */
03002, /* 50, DCA 2 ; store */
02050, /* 51, ISZ 50 ; incr store */
05047, /* 52, JMP 47 ; loop until done */
00000, /* LOAD, 0 */
06753, /* 54, STR */
05033, /* 55, JMP 33 */
06752, /* 56, XDR */
05453, /* 57, JMP I LOAD */
07024, /* UNIT, CML RAL ; for unit 1 */
06030 /* 61, KCC */
};
static const uint16 boot2_rom[] = {
01061, /* READ, TAD UNIT ; next unit+den */
01046, /* 21, TAD CON360 ; add in 360 */
00060, /* 22, AND CON420 ; mask to 420 */
03061, /* 23, DCA UNIT ; 400,420,0,20... */
07327, /* 24, STL CLA IAC RTL ; AC = 6 = read */
01061, /* 25, TAD UNIT ; +unit+den */
06751, /* 26, LCD ; load cmd */
07201, /* 27, CLA IAC; ; AC = 1 = trksec */
04053, /* 30, JMS LOAD ; load trk */
04053, /* 31, JMS LOAD ; load sec */
07004, /* CN7004, RAL ; AC = 2 = empty */
06755, /* START, SDN ; done? */
05054, /* 34, JMP LOAD+1 ; check xfr */
06754, /* 35, SER ; error? */
07450, /* 36, SNA ; AC=0 on start */
05020, /* 37, JMP RD ; try next den,un */
01061, /* 40, TAD UNIT ; +unit+den */
06751, /* 41, LCD ; load cmd */
01061, /* 42, TAD UNIT ; set 60 for sec boot */
00046, /* 43, AND CON360 ; only density */
01032, /* 44, TAD CN7004 ; magic */
03060, /* 45, DCA 60 */
00360, /* CON360, 360 ; NOP */
04053, /* 47, JMS LOAD ; get data */
03002, /* 50, DCA 2 ; store */
02050, /* 51, ISZ .-1 ; incr store */
05047, /* 52, JMP .-3 ; loop until done */
00000, /* LOAD, 0 */
06753, /* 54, STR ; xfr ready? */
05033, /* 55, JMP 33 ; no, chk done */
06752, /* 56, XDR ; get word */
05453, /* 57, JMP I 53 ; return */
00420, /* CON420, 420 ; toggle */
00020 /* UNIT, 20 ; unit+density */
};
t_stat rx_boot (int32 unitno, DEVICE *dptr)
{
int32 i;
extern int32 saved_PC;
extern uint16 M[];
if (rx_dib.dev != DEV_RX) /* only std devno */
return STOP_NOTSTD;
if (rx_28) {
for (i = 0; i < BOOT2_LEN; i++)
M[BOOT2_START + i] = boot2_rom[i];
saved_PC = BOOT2_ENTRY;
}
else {
for (i = 0; i < BOOT_LEN; i++)
M[BOOT_START + i] = boot_rom[i];
M[BOOT_INST] = unitno? 07024: 07004;
saved_PC = BOOT_ENTRY;
}
return SCPE_OK;
}