| /* b5500_dtc.c: Burrioughs 5500 Data Communications | |
| Copyright (c) 2016, Richard Cornwell | |
| Permission is hereby granted, free of charge, to any person obtaining a | |
| copy of this software and associated documentation files (the "Software"), | |
| to deal in the Software without restriction, including without limitation | |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| and/or sell copies of the Software, and to permit persons to whom the | |
| Software is furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be included in | |
| all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| RICHARD CORNWELL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| */ | |
| #include "b5500_defs.h" | |
| #include "sim_timer.h" | |
| #include "sim_sock.h" | |
| #include "sim_tmxr.h" | |
| #if (NUM_DEVS_DTC > 0) | |
| #define UNIT_DTC UNIT_ATTABLE | UNIT_DISABLE | UNIT_IDLE | |
| #define DTC_MLINES 32 /* mux lines */ | |
| #define DTC_TLINES 8 | |
| #define DTC_BUFSIZ 112 /* max chan transfer */ | |
| #define DTCSTA_READ 000400 /* Read flag */ | |
| #define DTCSTA_BINARY 004000 /* Bypass translation */ | |
| #define DTCSTA_INHIBIT 040000 /* Interrogate or Read/Write */ | |
| /* Flags in WC Field */ | |
| #define DTCSTA_TTU 0740 /* TTU number */ | |
| #define DTCSTA_GM 0020 /* Ignore GM on transfer */ | |
| #define DTCSTA_BUF 0017 /* Buffer Number */ | |
| /* Interrogate | |
| D28 - Busy DEV_ERROR | |
| D27 - Write Ready DEV_EOF | |
| D24 - Read Ready DEV_IORD */ | |
| /* Abnormal flag = DEV_WCFLG */ | |
| /* Buffer full/GM flag = D25 */ | |
| /* Buffer wrong state = DEV_EOF D27 */ | |
| /* Buffer Busy = DEV_ERROR D28 */ | |
| /* DTC not ready or buffer, DEV_NOTRDY D30 */ | |
| /* in u3 is device address */ | |
| /* in u4 is current address */ | |
| /* in u5 Line number */ | |
| #define DTC_CHAN 000003 /* Channel number */ | |
| #define DTC_RD 000004 /* Executing a read command */ | |
| #define DTC_WR 000010 /* Executing a write command */ | |
| #define DTC_INQ 000020 /* Executing an interragte command */ | |
| #define DTC_RDY 000040 /* Device Ready */ | |
| #define DTC_BIN 000100 /* Transfer in Binary mode */ | |
| #define DTC_IGNGM 000200 /* Ignore GM on transfer */ | |
| #define BufNotReady 0 /* Device not connected */ | |
| #define BufIdle 1 /* Buffer in Idle state */ | |
| #define BufInputBusy 2 /* Buffer being filled */ | |
| #define BufReadRdy 3 /* Buffer ready to read */ | |
| #define BufWrite 4 /* Buffer writing */ | |
| #define BufWriteRdy 5 /* Buffer ready for write */ | |
| #define BufOutBusy 6 /* Buffer outputing */ | |
| #define BufRead 7 /* Buffer reading */ | |
| #define BufSMASK 7 /* Buffer state mask */ | |
| #define BufAbnormal 010 /* Abnornmal flag */ | |
| #define BufGM 020 /* Buffer term with GM */ | |
| #define BufIRQ 040 /* Buffer ready */ | |
| /* Not connected line: | |
| BufNotReady. | |
| Write: | |
| BufNotReady -> 0x34 (EOF,ERROR,NR) | |
| BufIdle -> BufWrite (set GM if set.) | |
| BufReadReady -> 0x20 (EOF). | |
| BufInputBusy, BufWrite -> 0x30 | |
| -> 0x34 (EOF,ERROR) | |
| BufWriteRdy -> BufWrite. | |
| Write Done: | |
| BufOutBusy. | |
| Read: | |
| BufNotReady -> 0x34 (EOF,ERROR,NR) | |
| BufIdle -> 0x34 (EOF,ERROR,NR) | |
| BufInputBusy, BufOutBusy -> 0x30 (EOF,ERROR) | |
| BufReadRdy -> return buffer. -> BufIdle | |
| Interogate: | |
| return BufWriteRdy/BufWriteFull | |
| return BufReadRdy. | |
| Recieve Char: | |
| Connect: | |
| State BufWriteRdy. | |
| Output Done: | |
| BufGM -> BufIdle | |
| -> BufWriteRdy | |
| */ | |
| /* Translate chars | |
| output: | |
| ! -> LF. | |
| < -> RO. | |
| > -> X-OFF | |
| } -> Disconnect line | |
| ~ -> End of message. | |
| input: | |
| ~/_/CR -> End of message. | |
| BufReadRdy, IRQ. | |
| </BS -> Back up one char. | |
| !/ -> Disconnect insert } | |
| BufReadRdy, IRQ. | |
| ^B -> Clear input. | |
| BufIdle | |
| ^E -> set abnormal, buffer to BufWriteRdy. | |
| ^L -> Clear input. | |
| BufIdle | |
| ? -> Set abnormal | |
| Char: Buf to BufInputBsy. Insert char. | |
| if Fullbuff, BufReadRdy, IRQ, | |
| */ | |
| t_stat dtc_srv(UNIT *); | |
| t_stat dtco_srv(UNIT *); | |
| t_stat dtc_attach(UNIT *, CONST char *); | |
| t_stat dtc_detach(UNIT *); | |
| t_stat dtc_reset(DEVICE *); | |
| t_stat dtc_setnl (UNIT *, int32, CONST char *, void *); | |
| t_stat dtc_set_log (UNIT *, int32, CONST char *, void *); | |
| t_stat dtc_set_nolog (UNIT *, int32, CONST char *, void *); | |
| t_stat dtc_show_log (FILE *, UNIT *, int32, CONST void *); | |
| t_stat dtc_set_buf (UNIT *, int32, CONST char *, void *); | |
| t_stat dtc_show_buf (FILE *, UNIT *, int32, CONST void *); | |
| t_stat dtc_help(FILE *, DEVICE *, UNIT *, int32, const char *); | |
| t_stat dtc_help_attach (FILE *, DEVICE *, UNIT *, int32, const char *); | |
| const char *dtc_description(DEVICE *); | |
| int32 tmxr_poll; | |
| uint8 dtc_buf[DTC_MLINES][DTC_BUFSIZ]; | |
| TMLN dtc_ldsc[DTC_MLINES]; /* line descriptors */ | |
| TMXR dtc_desc = { DTC_TLINES, 0, 0, dtc_ldsc }; /* mux descriptor */ | |
| uint8 dtc_lstatus[DTC_MLINES]; /* Line status */ | |
| uint16 dtc_bufptr[DTC_MLINES]; /* Buffer pointer */ | |
| uint16 dtc_bsize[DTC_MLINES]; /* Buffer size */ | |
| uint16 dtc_blimit[DTC_MLINES]; /* Buffer size */ | |
| int dtc_bufsize = DTC_BUFSIZ; | |
| MTAB dtc_mod[] = { | |
| { MTAB_XTD|MTAB_VDV|MTAB_VALR, 1, NULL, "DISCONNECT", | |
| &tmxr_dscln, NULL, &dtc_desc, "Disconnect a specific line" }, | |
| { UNIT_ATT, UNIT_ATT, "SUMMARY", NULL, | |
| NULL, &tmxr_show_summ, (void *) &dtc_desc, "Display a summary of line states" }, | |
| { MTAB_XTD|MTAB_VDV|MTAB_NMO, 1, "CONNECTIONS", NULL, | |
| NULL, &tmxr_show_cstat, (void *) &dtc_desc, "Display current connections" }, | |
| { MTAB_XTD|MTAB_VDV|MTAB_NMO, 0, "STATISTICS", NULL, | |
| NULL, &tmxr_show_cstat, (void *) &dtc_desc, "Display multiplexer statistics" }, | |
| { MTAB_XTD|MTAB_VDV|MTAB_VALR, 0, "LINES", "LINES=n", | |
| &dtc_setnl, &tmxr_show_lines, (void *) &dtc_desc, "Display number of lines" }, | |
| { MTAB_XTD|MTAB_VDV|MTAB_VALR, 0, "BUFSIZE", "BUFSIZE=n", | |
| &dtc_set_buf, &dtc_show_buf, (void *)&dtc_bufsize, "Set buffer size" }, | |
| { MTAB_XTD|MTAB_VDV|MTAB_NC, 0, NULL, "LOG=n=file", | |
| &dtc_set_log, NULL, (void *)&dtc_desc }, | |
| { MTAB_XTD|MTAB_VDV|MTAB_VALR, 0, NULL, "NOLOG", | |
| &dtc_set_nolog, NULL, (void *)&dtc_desc, "Disable logging on designated line" }, | |
| { MTAB_XTD|MTAB_VDV|MTAB_NMO, 0, "LOG", NULL, | |
| NULL, &dtc_show_log, (void *)&dtc_desc, "Display logging for all lines" }, | |
| {0} | |
| }; | |
| UNIT dtc_unit[] = { | |
| {UDATA(&dtc_srv, UNIT_DTC, 0)}, /* DTC */ | |
| {UDATA(&dtco_srv, UNIT_DIS, 0)}, /* DTC server process */ | |
| }; | |
| DEVICE dtc_dev = { | |
| "DTC", dtc_unit, NULL, dtc_mod, | |
| 2, 8, 15, 1, 8, 64, | |
| NULL, NULL, &dtc_reset, NULL, &dtc_attach, &dtc_detach, | |
| NULL, DEV_DISABLE | DEV_DEBUG | DEV_MUX, 0, dev_debug, | |
| NULL, NULL, &dtc_help, &dtc_help_attach, (void *)&dtc_desc, | |
| &dtc_description | |
| }; | |
| /* Start off a terminal controller command */ | |
| t_stat dtc_cmd(uint16 cmd, uint16 dev, uint8 chan, uint16 *wc) | |
| { | |
| UNIT *uptr; | |
| int ttu; | |
| int buf; | |
| uptr = &dtc_unit[0]; | |
| /* If unit disabled return error */ | |
| if (uptr->flags & UNIT_DIS) | |
| return SCPE_NODEV; | |
| if ((uptr->flags & UNIT_ATT) == 0) | |
| return SCPE_UNATT; | |
| /* Check if drive is ready to recieve a command */ | |
| if ((uptr->u5 & DTC_RDY) == 0) | |
| return SCPE_BUSY; | |
| uptr->u5 = chan; | |
| ttu = (*wc & DTCSTA_TTU) >> 5; | |
| buf = (*wc & DTCSTA_BUF); | |
| /* Set the Terminal unit. */ | |
| if (ttu == 0) | |
| uptr->u4 = -1; | |
| else { | |
| uptr->u4 = buf + ((ttu-1) * 15); | |
| } | |
| if (*wc & DTCSTA_GM) | |
| uptr->u5 |= DTC_IGNGM; | |
| if (cmd & DTCSTA_READ) | |
| uptr->u5 |= DTC_RD; | |
| else if (cmd & DTCSTA_INHIBIT) | |
| uptr->u5 |= DTC_INQ; | |
| else | |
| uptr->u5 |= DTC_WR; | |
| if (cmd & DTCSTA_BINARY) | |
| uptr->u5 |= DTC_BIN; | |
| sim_debug(DEBUG_CMD, &dtc_dev, "Datacomm access %s %06o %d %04o\n", | |
| (uptr->u5 & DTC_RD) ? "read" : ((uptr->u5 & DTC_INQ) ? "inq" : | |
| ((uptr->u5 & DTC_WR) ? "write" : "unknown")), | |
| uptr->u5, uptr->u4, *wc); | |
| sim_activate(uptr, 5000); | |
| return SCPE_OK; | |
| } | |
| /* Handle processing terminal controller commands */ | |
| t_stat dtc_srv(UNIT * uptr) | |
| { | |
| int chan = uptr->u5 & DTC_CHAN; | |
| uint8 ch; | |
| int ttu; | |
| int buf; | |
| int i; | |
| int line = uptr->u4; | |
| /* Process interrage command */ | |
| if (uptr->u5 & DTC_INQ) { | |
| if (line == -1) { | |
| buf = -1; | |
| for(i = 0; i < DTC_MLINES; i++) { | |
| if (dtc_lstatus[i]& BufIRQ) { | |
| if ((dtc_lstatus[i] & BufSMASK) == BufReadRdy) | |
| buf = i; | |
| if ((dtc_lstatus[i] & BufSMASK) == BufWriteRdy || | |
| (dtc_lstatus[i] & BufSMASK) == BufIdle) { | |
| line = i; | |
| break; | |
| } | |
| } | |
| } | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "Datacomm inqury found %d %d ", | |
| line, buf); | |
| if (line != -1) { | |
| if ((dtc_lstatus[line] & BufSMASK) == BufWriteRdy) { | |
| chan_set_eof(chan); | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, " writerdy "); | |
| } else { | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, " idle "); | |
| } | |
| } else if (buf != -1) { | |
| chan_set_read(chan); | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, " readrdy "); | |
| line = buf; | |
| } | |
| if (line != -1) { | |
| if (dtc_lstatus[line] & BufAbnormal) { | |
| chan_set_wcflg(chan); | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, " abnormal "); | |
| } | |
| dtc_lstatus[line] &= ~BufIRQ; | |
| } | |
| } else { | |
| if (line > dtc_desc.lines) { | |
| chan_set_notrdy(chan); | |
| } else { | |
| switch(dtc_lstatus[line] & BufSMASK) { | |
| case BufReadRdy: | |
| chan_set_read(chan); | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, " readrdy "); | |
| break; | |
| case BufWriteRdy: | |
| chan_set_eof(chan); | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, " writerdy "); | |
| break; | |
| case BufIdle: | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, " idle "); | |
| break; | |
| default: | |
| chan_set_error(chan); | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, " busy "); | |
| break; | |
| } | |
| } | |
| if (dtc_lstatus[line] & BufAbnormal) { | |
| chan_set_wcflg(chan); | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, " abnormal "); | |
| } | |
| dtc_lstatus[line] &= ~BufIRQ; | |
| chan_set_wc(uptr->u4, 0); | |
| chan_set_end(chan); | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, " %03o ", dtc_lstatus[line]); | |
| } | |
| if (line != -1) { | |
| for (ttu = 1; line > 15; ttu++) | |
| line -= 15; | |
| } else { | |
| ttu = line = 0; | |
| } | |
| chan_set_wc(chan, (ttu << 5) | line); | |
| chan_set_end(chan); | |
| uptr->u5 = DTC_RDY; | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "Datacomm inqury %d %d\n", | |
| ttu, line); | |
| } | |
| /* Process for each unit */ | |
| if (uptr->u5 & DTC_WR) { | |
| if (line > dtc_desc.lines || line == -1) { | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "Datacomm write invalid %d\n", | |
| line); | |
| chan_set_notrdy(chan); | |
| chan_set_end(chan); | |
| uptr->u5 = DTC_RDY; | |
| return SCPE_OK; | |
| } | |
| /* Validate that we can send data to buffer */ | |
| i = dtc_lstatus[line] & BufSMASK; | |
| switch(i) { | |
| case BufNotReady: | |
| chan_set_notrdy(chan); | |
| case BufInputBusy: | |
| case BufRead: | |
| case BufReadRdy: | |
| chan_set_error(chan); | |
| case BufOutBusy: | |
| chan_set_eof(chan); | |
| chan_set_end(chan); | |
| uptr->u5 = DTC_RDY; | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "Datacomm write busy %d %d\n", | |
| line, i); | |
| return SCPE_OK; | |
| /* Ok to start filling */ | |
| case BufIdle: | |
| case BufWriteRdy: | |
| dtc_bufptr[line] = 0; | |
| dtc_bsize[line] = 0; | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "Datacomm write start %d\n", | |
| line); | |
| break; | |
| /* Continue filling */ | |
| case BufWrite: | |
| break; | |
| } | |
| if (chan_read_char(chan, &ch, dtc_bufptr[line] >= dtc_blimit[line])) { | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "Datacomm write done %d %d ", | |
| line, dtc_bufptr[line]); | |
| dtc_bsize[line] = dtc_bufptr[line]; | |
| dtc_bufptr[line] = 0; | |
| if (dtc_lstatus[line] & BufAbnormal) { | |
| chan_set_wcflg(chan); | |
| } | |
| /* Empty write, clears flags */ | |
| if (dtc_bsize[line] == 0) { | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "empty\n"); | |
| if ((dtc_lstatus[line] & BufSMASK) != BufIdle) { | |
| dtc_lstatus[line] = BufIRQ|BufIdle; | |
| IAR |= IRQ_12; | |
| } | |
| /* Check if we filled up buffer */ | |
| } else if (dtc_bsize[line] >= dtc_blimit[line]) { | |
| dtc_lstatus[line] = BufOutBusy; | |
| chan_set_gm(chan); | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "full "); | |
| } else { | |
| dtc_lstatus[line] = BufOutBusy|BufGM; | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "gm "); | |
| } | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "\n"); | |
| for (ttu = 1; line > 15; ttu++) | |
| line -= 15; | |
| chan_set_wc(chan, (ttu << 5) | line); | |
| chan_set_end(chan); | |
| uptr->u5 = DTC_RDY; | |
| return SCPE_OK; | |
| } else { | |
| dtc_lstatus[line] = BufWrite; | |
| dtc_buf[line][dtc_bufptr[line]++] = ch & 077; | |
| sim_debug(DEBUG_DATA, &dtc_dev, "Datacomm write data %d %02o %d\n", | |
| line, ch&077, dtc_bufptr[line]); | |
| } | |
| sim_activate(uptr, 5000); | |
| } | |
| if (uptr->u5 & DTC_RD) { | |
| if (line > dtc_desc.lines || line == -1) { | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "Datacomm read nothing %d\n", | |
| line); | |
| chan_set_notrdy(chan); | |
| chan_set_end(chan); | |
| uptr->u5 = DTC_RDY; | |
| return SCPE_OK; | |
| } | |
| /* Validate that we can send data to buffer */ | |
| i = dtc_lstatus[line] & BufSMASK; | |
| switch(i) { | |
| case BufNotReady: | |
| chan_set_notrdy(chan); | |
| /* Fall through */ | |
| case BufInputBusy: | |
| chan_set_error(chan); | |
| /* Fall through */ | |
| case BufWriteRdy: | |
| /* Fall through */ | |
| case BufOutBusy: | |
| /* Fall through */ | |
| case BufIdle: | |
| /* Fall through */ | |
| case BufWrite: | |
| chan_set_eof(chan); | |
| chan_set_end(chan); | |
| uptr->u5 = DTC_RDY; | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "Datacomm read busy %d %d\n", | |
| line, i); | |
| return SCPE_OK; | |
| /* Ok to start filling */ | |
| case BufReadRdy: | |
| dtc_lstatus[line] = (dtc_lstatus[line] & 030) | BufRead; | |
| dtc_bufptr[line] = 0; | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "Datacomm read starting %d\n", | |
| line); | |
| break; | |
| /* Continue filling */ | |
| case BufRead: | |
| break; | |
| } | |
| ch = dtc_buf[line][dtc_bufptr[line]++]; | |
| /* If no buffer, error out */ | |
| if (chan_write_char(chan, &ch, dtc_bufptr[line] >= dtc_bsize[line])) { | |
| /* Check if we filled up buffer */ | |
| if (dtc_lstatus[line] & BufGM) { | |
| chan_set_gm(chan); | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "gm "); | |
| } | |
| if (dtc_lstatus[line] & BufAbnormal) | |
| chan_set_wcflg(chan); | |
| if (dtc_ldsc[line].conn == 0) /* connected? */ | |
| dtc_lstatus[line] = BufIRQ|BufNotReady; | |
| else | |
| dtc_lstatus[line] = BufIRQ|BufIdle; | |
| dtc_bsize[line] = 0; | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "Datacomm read done %d\n", | |
| line); | |
| for (ttu = 1; line > 15; ttu++) | |
| line -= 15; | |
| chan_set_wc(chan, (ttu << 5) | line); | |
| chan_set_end(chan); | |
| uptr->u5 = DTC_RDY; | |
| IAR |= IRQ_12; | |
| return SCPE_OK; | |
| } else { | |
| sim_debug(DEBUG_DATA, &dtc_dev, "Datacomm read data %d %02o %d\n", | |
| line, ch & 077, dtc_bufptr[line]); | |
| } | |
| sim_activate(uptr, 5000); | |
| } | |
| return SCPE_OK; | |
| } | |
| /* Unit service - receive side | |
| Poll all active lines for input | |
| Poll for new connections */ | |
| t_stat | |
| dtco_srv(UNIT * uptr) | |
| { | |
| int c, ln, t, c1; | |
| sim_clock_coschedule(uptr, tmxr_poll); | |
| ln = tmxr_poll_conn(&dtc_desc); /* look for connect */ | |
| if (ln >= 0) { /* got one? */ | |
| dtc_blimit[ln] = dtc_bufsize-1; | |
| dtc_lstatus[ln] = BufIRQ|BufAbnormal|BufWriteRdy; | |
| IAR |= IRQ_12; | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "Datacomm connect %d\n", ln); | |
| } | |
| /* For each line that is in idle state enable recieve */ | |
| for (ln = 0; ln < dtc_desc.lines; ln++) { | |
| if (dtc_ldsc[ln].conn && | |
| (dtc_lstatus[ln] & BufSMASK) == BufIdle) { | |
| dtc_ldsc[ln].rcve = 1; | |
| } | |
| } | |
| tmxr_poll_rx(&dtc_desc); /* poll for input */ | |
| for (ln = 0; ln < DTC_MLINES; ln++) { /* loop thru mux */ | |
| /* Check for disconnect */ | |
| if (dtc_ldsc[ln].conn == 0) { /* connected? */ | |
| switch(dtc_lstatus[ln] & BufSMASK) { | |
| case BufIdle: /* Idle, throw in EOT */ | |
| /* Fall through */ | |
| case BufWriteRdy: /* Awaiting output, terminate */ | |
| dtc_bufptr[ln] = 0; | |
| /* Fall through */ | |
| case BufInputBusy: /* reading, terminate with EOT */ | |
| dtc_buf[ln][dtc_bufptr[ln]++] = 017; | |
| dtc_bsize[ln] = dtc_bufptr[ln]; | |
| dtc_lstatus[ln] = BufIRQ|BufAbnormal|BufReadRdy; | |
| IAR |= IRQ_12; | |
| break; | |
| case BufOutBusy: /* Terminate Output */ | |
| dtc_lstatus[ln] = BufIRQ|BufIdle; | |
| dtc_bsize[ln] = 0; | |
| IAR |= IRQ_12; | |
| break; | |
| default: /* Other cases, ignore until | |
| in better state */ | |
| break; | |
| break; | |
| } | |
| continue; /* Skip if not connected */ | |
| } | |
| switch(dtc_lstatus[ln] & BufSMASK) { | |
| case BufIdle: | |
| /* If we have any data to receive */ | |
| if (tmxr_rqln(&dtc_ldsc[ln]) > 0) | |
| dtc_lstatus[ln] = BufInputBusy; | |
| else | |
| break; /* Nothing to do */ | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "Datacomm recieve %d idle\n", | |
| ln); | |
| dtc_bufptr[ln] = 0; | |
| dtc_bsize[ln] = 0; | |
| case BufInputBusy: | |
| t = 1; | |
| while (t && tmxr_rqln(&dtc_ldsc[ln]) != 0) { | |
| c = tmxr_getc_ln(&dtc_ldsc[ln]) & 0x7f; /* get char */ | |
| c1 = ascii_to_con[c]; | |
| switch(c) { | |
| case '\005': /* ^E ENQ who-are-you */ | |
| dtc_lstatus[ln] &= ~(BufSMASK); | |
| dtc_lstatus[ln] |= BufIRQ|BufAbnormal|BufWriteRdy; | |
| IAR |= IRQ_12; | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, | |
| "Datacomm recieve ENQ %d\n", ln); | |
| t = 0; | |
| break; | |
| case '\003': /* ^B send STX */ | |
| dtc_lstatus[ln] &= ~BufSMASK; | |
| dtc_lstatus[ln] |= BufIRQ|BufReadRdy|BufAbnormal; | |
| dtc_buf[ln][0] = 0; | |
| dtc_buf[ln][1] = 017; | |
| dtc_buf[ln][2] = 077; | |
| dtc_bsize[ln] = 1; | |
| IAR |= IRQ_12; | |
| t = 0; | |
| break; | |
| case '}': | |
| dtc_buf[ln][dtc_bufptr[ln]++] = 017; | |
| dtc_lstatus[ln] |= BufAbnormal; | |
| /* Fall through to next */ | |
| case '\r': | |
| /* Fall through */ | |
| case '\n': | |
| /* Fall through */ | |
| case '~': | |
| dtc_lstatus[ln] &= ~BufSMASK; | |
| dtc_lstatus[ln] |= BufIRQ|BufReadRdy; | |
| /* Force at least one character for GM */ | |
| dtc_buf[ln][dtc_bufptr[ln]++] = 077; | |
| dtc_bsize[ln] = dtc_bufptr[ln]; | |
| IAR |= IRQ_12; | |
| t = 0; | |
| c1 = 0; | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, | |
| "Datacomm recieve %d return\n", ln); | |
| break; | |
| case '\025': /* Control U clear input buffer. */ | |
| dtc_bsize[ln] = 0; | |
| c1 = 0; | |
| break; | |
| case '\b': | |
| case 0x7f: | |
| if (dtc_bufptr[ln] > 0) { | |
| tmxr_putc_ln(&dtc_ldsc[ln], '\b'); | |
| tmxr_putc_ln(&dtc_ldsc[ln], ' '); | |
| tmxr_putc_ln(&dtc_ldsc[ln], '\b'); | |
| dtc_bufptr[ln]--; | |
| } else { | |
| tmxr_putc_ln(&dtc_ldsc[ln], '\007'); | |
| } | |
| c1 = 0; | |
| sim_debug(DEBUG_DATA, &dtc_dev, | |
| "Datacomm recieve %d backspace %d\n", ln, dtc_bufptr[ln]); | |
| break; | |
| case '?': | |
| sim_debug(DEBUG_DATA, &dtc_dev, | |
| "Datacomm recieve %d ?\n", ln); | |
| dtc_lstatus[ln] |= BufAbnormal; | |
| tmxr_putc_ln(&dtc_ldsc[ln], '?'); | |
| dtc_buf[ln][dtc_bufptr[ln]++] = c1; | |
| break; | |
| default: | |
| sim_debug(DEBUG_DATA, &dtc_dev, | |
| "Datacomm recieve %d %02x %c %02o %d\n", ln, c, c, c1, | |
| dtc_bufptr[ln]); | |
| } | |
| if (t && c1) { | |
| tmxr_putc_ln(&dtc_ldsc[ln], con_to_ascii[c1]); | |
| dtc_buf[ln][dtc_bufptr[ln]++] = c1; | |
| } | |
| if (dtc_bufptr[ln] >= dtc_blimit[ln]) { | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, | |
| "Datacomm recieve %d full\n", ln); | |
| dtc_lstatus[ln] &= ~(BufSMASK); | |
| dtc_lstatus[ln] |= BufGM|BufIRQ|BufReadRdy; | |
| dtc_bsize[ln] = dtc_bufptr[ln]; | |
| IAR |= IRQ_12; | |
| t = 0; | |
| break; | |
| } | |
| } | |
| break; | |
| case BufOutBusy: | |
| /* Get next char and send to output */ | |
| t = 1; | |
| while(t && dtc_bufptr[ln] < dtc_bsize[ln] && dtc_ldsc[ln].xmte) { | |
| c = dtc_buf[ln][dtc_bufptr[ln]++]; | |
| c1 = con_to_ascii[c]; | |
| switch(c) { | |
| case 057: /* { */ | |
| c1 = '\r'; /* CR */ | |
| break; | |
| case 032: /* ! */ | |
| c1 = '\n'; /* LF */ | |
| break; | |
| case 076: /* < */ | |
| c1 = 0; /* X-ON */ | |
| break; | |
| case 016: /* > */ | |
| c1 = 0; /* DEL */ | |
| break; | |
| case 017: /* } */ | |
| /* Disconnect line */ | |
| tmxr_reset_ln(&dtc_ldsc[ln]); | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, | |
| "Datacomm disconnect %d\n", ln); | |
| t = 0; | |
| continue; /* On to next line */ | |
| } | |
| sim_debug(DEBUG_DATA, &dtc_dev, | |
| "Datacomm transmit %d %02o %c\n", ln, c&077, c1); | |
| tmxr_putc_ln(&dtc_ldsc[ln], c1); | |
| if (c1 == '\n') { | |
| tmxr_putc_ln(&dtc_ldsc[ln], '\r'); | |
| } | |
| } | |
| if (dtc_bufptr[ln] >= dtc_bsize[ln]) { | |
| if (dtc_lstatus[ln] & BufGM) { | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, | |
| "Datacomm idle %d\n", ln); | |
| dtc_lstatus[ln] = BufIRQ|BufIdle; | |
| } else { | |
| sim_debug(DEBUG_DETAIL, &dtc_dev, "Datacomm writerdy %d\n", | |
| ln); | |
| dtc_lstatus[ln] = BufIRQ|BufWriteRdy; | |
| } | |
| IAR |= IRQ_12; | |
| } | |
| break; | |
| default: | |
| /* Other states are an ignore */ | |
| break; | |
| } | |
| } /* end for */ | |
| tmxr_poll_tx(&dtc_desc); /* poll xmt */ | |
| return SCPE_OK; | |
| } | |
| t_stat | |
| dtc_reset(DEVICE *dptr) { | |
| if (dtc_unit[0].flags & UNIT_ATT) { | |
| sim_activate(&dtc_unit[1], 100); /* quick poll */ | |
| iostatus |= DTC_FLAG; | |
| } else { | |
| sim_cancel(&dtc_unit[1]); | |
| iostatus &= ~DTC_FLAG; | |
| } | |
| return SCPE_OK; | |
| } | |
| /* Attach master unit */ | |
| t_stat | |
| dtc_attach(UNIT * uptr, CONST char *cptr) | |
| { | |
| int i; | |
| t_stat r; | |
| r = tmxr_attach(&dtc_desc, uptr, cptr); /* attach */ | |
| if (r != SCPE_OK) | |
| return r; /* error */ | |
| sim_activate(&dtc_unit[1], 100); /* quick poll */ | |
| for (i = 0; i < DTC_MLINES; i++) { | |
| dtc_lstatus[i] = BufNotReady; /* Device not connected */ | |
| } | |
| uptr->u5 = DTC_RDY; | |
| iostatus |= DTC_FLAG; | |
| return SCPE_OK; | |
| } | |
| /* Detach master unit */ | |
| t_stat | |
| dtc_detach(UNIT * uptr) | |
| { | |
| int i; | |
| t_stat r; | |
| r = tmxr_detach(&dtc_desc, uptr); /* detach */ | |
| for (i = 0; i < dtc_desc.lines; i++) | |
| dtc_ldsc[i].rcve = 0; /* disable rcv */ | |
| sim_cancel(uptr); /* stop poll */ | |
| uptr->u5 = 0; | |
| iostatus &= ~DTC_FLAG; | |
| return r; | |
| } | |
| /* SET LINES processor */ | |
| t_stat dtc_setnl (UNIT *uptr, int32 val, CONST char *cptr, void *desc) | |
| { | |
| int32 newln, i, t; | |
| t_stat r; | |
| if (cptr == NULL) | |
| return SCPE_ARG; | |
| newln = (int32) get_uint (cptr, 10, DTC_MLINES, &r); | |
| if ((r != SCPE_OK) || (newln == dtc_desc.lines)) | |
| return r; | |
| if ((newln == 0) || (newln > DTC_MLINES)) | |
| return SCPE_ARG; | |
| newln--; | |
| if (newln < dtc_desc.lines) { | |
| for (i = newln, t = 0; i < dtc_desc.lines; i++) | |
| t = t | dtc_ldsc[i].conn; | |
| if (t && !get_yn ("This will disconnect users; proceed [N]?", FALSE)) | |
| return SCPE_OK; | |
| for (i = newln; i < dtc_desc.lines; i++) { | |
| if (dtc_ldsc[i].conn) { | |
| tmxr_linemsg (&dtc_ldsc[i], "\r\nOperator disconnected line\r\n"); | |
| tmxr_send_buffered_data (&dtc_ldsc[i]); | |
| } | |
| tmxr_detach_ln (&dtc_ldsc[i]); /* completely reset line */ | |
| } | |
| } | |
| if (dtc_desc.lines < newln) | |
| memset (dtc_ldsc + dtc_desc.lines, 0, sizeof(*dtc_ldsc)*(newln-dtc_desc.lines)); | |
| dtc_desc.lines = newln; | |
| return dtc_reset (&dtc_dev); /* setup lines and auto config */ | |
| } | |
| /* SET LOG processor */ | |
| t_stat dtc_set_log (UNIT *uptr, int32 val, CONST char *cptr, void *desc) | |
| { | |
| t_stat r; | |
| char gbuf[CBUFSIZE]; | |
| int32 ln; | |
| if (cptr == NULL) | |
| return SCPE_ARG; | |
| cptr = get_glyph (cptr, gbuf, '='); | |
| if ((cptr == NULL) || (*cptr == 0) || (gbuf[0] == 0)) | |
| return SCPE_ARG; | |
| ln = (int32) get_uint (gbuf, 10, dtc_desc.lines, &r); | |
| if ((r != SCPE_OK) || (ln >= dtc_desc.lines)) | |
| return SCPE_ARG; | |
| return tmxr_set_log (NULL, ln, cptr, desc); | |
| } | |
| /* SET NOLOG processor */ | |
| t_stat dtc_set_nolog (UNIT *uptr, int32 val, CONST char *cptr, void *desc) | |
| { | |
| t_stat r; | |
| int32 ln; | |
| if (cptr == NULL) | |
| return SCPE_ARG; | |
| ln = (int32) get_uint (cptr, 10, dtc_desc.lines, &r); | |
| if ((r != SCPE_OK) || (ln >= dtc_desc.lines)) | |
| return SCPE_ARG; | |
| return tmxr_set_nolog (NULL, ln, NULL, desc); | |
| } | |
| /* SHOW LOG processor */ | |
| t_stat dtc_show_log (FILE *st, UNIT *uptr, int32 val, CONST void *desc) | |
| { | |
| int32 i; | |
| for (i = 0; i < dtc_desc.lines; i++) { | |
| fprintf (st, "line %d: ", i); | |
| tmxr_show_log (st, NULL, i, desc); | |
| fprintf (st, "\n"); | |
| } | |
| return SCPE_OK; | |
| } | |
| /* SET BUFFER processor */ | |
| t_stat dtc_set_buf (UNIT *uptr, int32 val, CONST char *cptr, void *desc) | |
| { | |
| t_stat r; | |
| int32 bufsiz; | |
| if (cptr == NULL) | |
| return SCPE_ARG; | |
| bufsiz = (int32) get_uint (cptr, 10, DTC_BUFSIZ, &r); | |
| if ((r != SCPE_OK) || (bufsiz >= DTC_BUFSIZ)) | |
| return SCPE_ARG; | |
| if (bufsiz > 0 && (bufsiz % 28) == 0) { | |
| dtc_bufsize = bufsiz; | |
| return SCPE_OK; | |
| } | |
| return SCPE_ARG; | |
| } | |
| /* SHOW BUFFER processor */ | |
| t_stat dtc_show_buf (FILE *st, UNIT *uptr, int32 val, CONST void *desc) | |
| { | |
| fprintf (st, "bufsize=%d ", dtc_bufsize); | |
| return SCPE_OK; | |
| } | |
| /* Show summary processor */ | |
| t_stat | |
| dtc_summ(FILE * st, UNIT * uptr, int32 val, CONST void *desc) | |
| { | |
| uint32 i, t; | |
| t = 0; | |
| for (i = 0; i < DTC_MLINES; i++) | |
| t = t + (dtc_ldsc[i].conn != 0); | |
| if (t == 1) | |
| fprintf(st, "1 connection"); | |
| else | |
| fprintf(st, "%d connections", t); | |
| return SCPE_OK; | |
| } | |
| /* SHOW CONN/STAT processor */ | |
| t_stat | |
| dtc_show(FILE * st, UNIT * uptr, int32 val, CONST void *desc) | |
| { | |
| int32 i, cc; | |
| for (cc = 0; (cc < DTC_MLINES) && dtc_ldsc[cc].conn; cc++) ; | |
| if (cc) { | |
| for (i = 0; i < DTC_MLINES; i++) { | |
| if (dtc_ldsc[i].conn) { | |
| if (val) | |
| tmxr_fconns(st, &dtc_ldsc[i], i); | |
| else | |
| tmxr_fstats(st, &dtc_ldsc[i], i); | |
| } | |
| } | |
| } else | |
| fprintf(st, "all disconnected\n"); | |
| return SCPE_OK; | |
| } | |
| t_stat dtc_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr) | |
| { | |
| fprintf (st, "B249 Terminal Control Unit\n\n"); | |
| fprintf (st, "The B249 is a terminal multiplexor. Up to %d lines are supported.\n", DTC_MLINES); | |
| fprintf (st, "The default number of lines is %d. The number of lines can\n", DTC_MLINES); | |
| fprintf (st, "be changed with the command\n\n"); | |
| fprintf (st, " sim> SET %s LINES=n set line count to n\n\n", dptr->name); | |
| fprintf (st, "The default buffer size for all lines can be set to a multiple of 28\n"); | |
| fprintf (st, "to a max of %d characters. Changes will take effect when ", DTC_BUFSIZ); | |
| fprintf (st, "devices connect.\nThis number must match what MCP believes to be the "); | |
| fprintf (st, "buffer size.\n\n"); | |
| fprintf (st, " sim> SET %s BUFSIZE=n set buffer size to n\n\n", dptr->name); | |
| fprintf (st, "The B249 supports logging on a per-line basis. The command\n\n"); | |
| fprintf (st, " sim> SET %s LOG=n=filename\n\n", dptr->name); | |
| fprintf (st, "enables logging for the specified line(n) to the indicated file. The command\n\n"); | |
| fprintf (st, " sim> SET %s NOLOG=line\n\n", dptr->name); | |
| fprintf (st, "disables logging for the specified line and closes any open log file. Finally,\n"); | |
| fprintf (st, "the command:\n\n"); | |
| fprintf (st, " sim> SHOW %s LOG\n\n", dptr->name); | |
| fprintf (st, "displays logging information for all %s lines.\n\n", dptr->name); | |
| fprintf (st, "Once the B249 is attached and the simulator is running, the B249 will listen for\n"); | |
| fprintf (st, "connections on the specified port. It assumes that the incoming connections\n"); | |
| fprintf (st, "are Telnet connections. The connection remains open until disconnected by the\n"); | |
| fprintf (st, "simulated program, the Telnet client, a SET %s DISCONNECT command, or a\n", dptr->name); | |
| fprintf (st, "DETACH %s command.\n\n", dptr->name); | |
| fprintf (st, "Other special %s commands:\n\n", dptr->name); | |
| fprintf (st, " sim> SHOW %s CONNECTIONS show current connections\n", dptr->name); | |
| fprintf (st, " sim> SHOW %s STATISTICS show statistics for active connections\n", dptr->name); | |
| fprintf (st, " sim> SET %s DISCONNECT=linenumber disconnects the specified line.\n\n\n", dptr->name); | |
| fprintf (st, "All open connections are lost when the simulator shuts down or the %s is\n", dptr->name); | |
| fprintf (st, "detached.\n\n"); | |
| dtc_help_attach (st, dptr, uptr, flag, cptr); | |
| return SCPE_OK; | |
| } | |
| t_stat dtc_help_attach (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr) | |
| { | |
| tmxr_attach_help (st, dptr, uptr, flag, cptr); | |
| fprintf (st, "The terminal lines perform input and output through Telnet sessions connected\n"); | |
| fprintf (st, "to a user-specified port. The ATTACH command specifies the port to be used:\n\n"); | |
| fprintf (st, " sim> ATTACH %s {interface:}port set up listening port\n\n", dptr->name); | |
| fprintf (st, "where port is a decimal number between 1 and 65535 that is not being used for\n"); | |
| fprintf (st, "other TCP/IP activities. All terminals are considered Dialup to the B249.\n"); | |
| return SCPE_OK; | |
| } | |
| const char *dtc_description (DEVICE *dptr) | |
| { | |
| return "B249 Terminal Control Unit"; | |
| } | |
| #endif |