Rivoreo Source Code Repositories
src.rivoreo.one / emulators / simh / f20f5c629da646dd6a064d2516d68dba11fdba0c / . / PDP18B / pdp18b_doc.txt
blob: 76ce61bfa5d3dc718471e9fe30426fe8597c73d0 [file] [log] [blame] [raw]
To: Users
From: Bob Supnik
Subj: 18b PDP Simulator Usage
Date: 01-Feb-2003
COPYRIGHT NOTICE
The following copyright notice applies to both the SIMH source and binary:
Original code published in 1993-2003, written by Robert M Supnik
Copyright (c) 1993-2003, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
This memorandum documents the PDP-4, PDP-7, PDP-9, and PDP-15 simulators.
1. Simulator Files
To compile a particular model in the 18b family, you must include the appropriate
switch in the compilation command line:
PDP-4/ PDP4
PDP-7/ PDP7
PDP-9/ PDP9
PDP-15/ PDP15
If no model is specified, the default is the PDP-9.
sim/ sim_defs.h
sim_rev.h
sim_sock.h
sim_tmxr.h
scp.c
scp_tty.c
sim_sock.c
sim_tmxr.c
sim/pdp18b/ pdp18b_defs.h
pdp18b_cpu.c
pdp18b_drm.c
pdp18b_dt.c
pdp18b_lp.c
pdp18b_mt.c
pdp18b_rb.c
pdp18b_rf.c
pdp18b_rp.c
pdp18b_stddev.c
pdp18b_sys.c
pdp18b_tt1.c
2. 18b PDP Features
The other four 18b PDP's (PDP-4, PDP-7, PDP-9, PDP-15) are very similar
and are configured as follows:
system device simulates
name(s)
PDP-4 CPU PDP-4 CPU with 8KW of memory
PTR,PTP integral paper tape/Type 75 punch
TTI,TTO KSR28 console terminal (Baudot code)
LPT Type 62 line printer (Hollerith code)
CLK integral real-time clock
DT Type 550/555 DECtape
DRM Type 24 serial drum
PDP-7 CPU PDP-7 CPU with 32KW of memory
- Type 177 extended arithmetic element (EAE)
- Type 148 memory extension
PTR,PTP Type 444 paper tape reader/Type 75 punch
TTI,TTO KSR 33 console terminal
LPT Type 647 line printer
CLK integral real-time clock
DT Type 550/555 DECtape
DRM Type 24 serial drum
PDP-9 CPU PDP-9 CPU with 32KW of memory
- KE09A extended arithmetic element (EAE)
- KF09A automatic priority interrupt (API)
- KG09B memory extension
- KP09A power detection
- KX09A memory protection
PTR,PTP PC09A paper tape reader/punch
TTI,TTO KSR 33 console terminal
TTI1,TTO1 LT09A second console terminal
LP9 LP09 line printer
LPT Type 647E line printer
CLK integral real-time clock
RB RB09 fixed-head disk
RF RF09/RS09 fixed-head disk
DT TC02/TU55 DECtape
MT TC59/TU10 magnetic tape
PDP-15 CPU PDP-15 CPU with 32KW of memory
- KE15 extended arithmetic element (EAE)
- KA15 automatic priority interrupt (API)
- KF15 power detection
- KM15 memory protection
PTR,PTP PC15 paper tape reader/punch
TTI,TTO KSR 35 console terminal
TTI1,TTO1 LT15 second console terminal
LP9 LP09 line printer
LPT LP15 line printer
CLK integral real-time clock
RP RP15/RP02 disk pack
RF RF15/RS09 fixed-head disk
DT TC15/TU56 DECtape
MT TC59/TU10 magnetic tape
Most devices can be disabled or enabled, by the commands:
SET <dev> DISABLED
SET <dev> ENABLED
The simulator allows most device numbers to be changed, by the command:
SET <dev> DEV=<number>
However, devices can only be BOOTed with their default device numbers.
The 18b PDP simulators implement several unique stop conditions:
- an unimplemented instruction is decoded, and register
STOP_INST is set
- more than XCTMAX nested executes are detected during
instruction execution
The PDP-4 and PDP-7 loaders support only RIM format tapes. The PDP-9
and PDP-15 support both RIM and BIN format tapes. If the file extension
is .RIM, or the -r switch is specified with LOAD, the file is assumed to
be RIM format; if the file extension is not .RIM, or if the -b switch is
specified, the file is assumed to be BIN format. RIM loading requires
that the loading address be specified on the command line.
2.1 CPU
The CPU options are the presence of the EAE, the presense of the API (for
the PDP-9 and PDP-15), and the size of main memory.
SET CPU EAE enable EAE
SET CPU NOEAE disable EAE
SET CPU API enable API
SET CPU NOAPI disable API
SET CPU 4K set memory size = 4K
SET CPU 8K set memory size = 8K
SET CPU 12K set memory size = 12K
SET CPU 16K set memory size = 16K
SET CPU 20K set memory size = 20K
SET CPU 24K set memory size = 24K
SET CPU 28K set memory size = 28K
SET CPU 32K set memory size = 32K
SET CPU 48K set memory size = 48K
SET CPU 64K set memory size = 64K
SET CPU 80K set memory size = 80K
SET CPU 96K set memory size = 96K
SET CPU 112K set memory size = 112K
SET CPU 128K set memory size = 128K
Memory sizes greater than 8K are only available on the PDP-7, PDP-9, and
PDP-15; memory sizes greater than 32KW are only available on the PDP-15.
If memory size is being reduced, and the memory being truncated contains
non-zero data, the simulator asks for confirmation. Data in the truncated
portion of memory is lost. Initial memory size is 8K for the PDP-4, 32K
for the PDP-7 and PDP-9, and 128K for the PDP-15.
CPU registers include the visible state of the processor as well as the
control registers for the interrupt system.
system name size comments
all PC addr program counter
all AC 18 accumulator
all L 1 link
7,9,15 MQ 18 multiplier-quotient
7,9,15 SC 6 shift counter
7,9,15 EAE_AC_SIGN 1 EAE AC sign
all SR 18 front panel switches
all INT[0:4] 32 interrupt requests,
0:3 = API levels 0-3
4 = PI level
all IORS 18 IORS register
all ION 1 interrupt enable
all ION_DELAY 2 interrupt enable delay
9,15 APIENB 1 API enable
9,15 APIREQ 8 API requesting levels
9,15 APIACT 8 API active levels
9,15 BR addr memory protection bounds
15 XR 18 index register
15 LR 18 limit register
15 BR 17 memory protection bounds
9,15 USMD 1 user mode
9,15 USMDBUF 1 user mode buffer
9,15 NEXM 1 non-existent memory violation
9,15 PRVN 1 privilege violation
7,9 EXTM 1 extend mode
7,9 EXTM_INIT 1 extend mode value after reset
15 BANKM 1 bank mode
15 BANKM_INIT 1 bank mode value after reset
7 TRAPM 1 trap mode
7,9,15 TRAPP 1 trap pending
7,9 EMIRP 1 EMIR instruction pending
9,15 RESTP 1 DBR or RES instruction pending
9,15 PWRFL 1 power fail flag
all PCQ[0:63] addr PC prior to last JMP, JMS, CAL, or
interrupt; most recent PC change first
all STOP_INST 1 stop on undefined instruction
all WRU 8 interrupt character
"addr" signifies the address width of the system (13b for the PDP-4, 15b for
the PDP-7 and PDP-9, 17b for the PDP-15).
2.2 Programmed I/O Devices
2.2.1 Paper Tape Reader (PTR)
The paper tape reader (PTR) reads data from a disk file. The POS
register specifies the number of the next data item to be read. Thus,
by changing POS, the user can backspace or advance the reader.
On the PDP-4 and PDP-7, the paper tape reader supports the BOOT command.
BOOT PTR copies the RIM loader into memory and starts it running, while
BOOT -F PTR copies the funny format binary loader into memory and starts
it running.
The PTR ATTACH command recognizes one switch, -A for ASCII mode. In
ASCII mode, data returned by the read alphabetic command has even parity.
This allows normal text files to be used as input to the paper tape reader.
The paper tape reader implements these registers:
name size comments
BUF 8 last data item processed
INT 1 interrupt pending flag
DONE 1 device done flag
ERR 1 error flag (PDP-9, PDP-15 only)
POS 32 position in the input file
TIME 24 time from I/O initiation to interrupt
STOP_IOE 1 stop on I/O error
Error handling is as follows:
error STOP_IOE processed as
not attached 1 report error and stop
0 out of tape
end of file 1 report error and stop
0 out of tape
OS I/O error x report error and stop
2.2.2 Paper Tape Punch (PTP)
The paper tape punch (PTP) writes data to a disk file. The POS
register specifies the number of the next data item to be written.
Thus, by changing POS, the user can backspace or advance the punch.
The PTP ATTACH command recognizes one switch, -A for ASCII mode. In
ASCII mode, data is punched with the high order bit clear, and NULL and
DEL characters are supressed. This allows punch output to be processed
with normal text editing utilities.
The paper tape punch implements these registers:
name size comments
BUF 8 last data item processed
INT 1 interrupt pending flag
DONE 1 device done flag
ERR 1 error flag (PDP-9, PDP-15 only)
POS 32 position in the output file
TIME 24 time from I/O initiation to interrupt
STOP_IOE 1 stop on I/O error
Error handling is as follows:
error STOP_IOE processed as
not attached 1 report error and stop
0 out of tape or paper
OS I/O error x report error and stop
2.2.3 Terminal Input (TTI)
On the PDP-7, PDP-9, and PDP-15, the terminal interfaces (TTI, TTO)
can be set to one of three modes: KSR, 7B, or 8B. In KSR mode, lower
case input and output characters are automatically converted to upper
case, the high order bit is forced to one on input, and printing of
ALTmode characters is supressed. In 7B mode, input and output characters
are masked to 7 bits. In 8B mode, characters are not modified. Changing
the mode of either interface changes both. The default mode is KSR.
On the PDP-9 and PDP-15, the console terminal operates, by default,
with local echo. For backward compatibility, the terminal input can
be set to FDX (full duplex), which supresses local echo.
The terminal input (TTI) polls the console keyboard for input. It
implements these registers:
name size comments
BUF 8 last data item processed
INT 1 interrupt pending flag
DONE 1 device done flag
POS 32 number of characters input
TIME 24 keyboard polling interval
2.2.4 Terminal Output (TTO)
The terminal output (TTO) writes to the simulator console window. It
implements these registers:
name size comments
BUF 8 last data item processed
INT 1 interrupt pending flag
DONE 1 device done flag
POS 32 number of chararacters output
TIME 24 time from I/O initiation to interrupt
2.2.5 Line Printers (LPT, LP9)
The line printers (LPT, LP9) write data to a disk file. The POS
register specifies the number of the next data item to be written.
Thus, by changing POS, the user can backspace or advance the printer.
LPT is the "default" line printer for a CPU: Type 62 for the PDP-4,
Type 647 for the PDP-7 and PDP-9, and LP15 for the PDP-15. LP9 is
the LP09 line printer controller for the PDP-9. It may be needed
on the PDP-15 to run certain software packages. LP9 is disabled by
default.
The Type 62 printer controller implements these registers:
name size comments
BUF 8 last data item processed
INT 1 interrupt pending flag
DONE 1 device done flag
SPC 1 spacing done flag
BPTR 6 print buffer pointer
POS 32 position in the output file
TIME 24 time from I/O initiation to interrupt
STOP_IOE 1 stop on I/O error
LBUF[0:119] 8 line buffer
The Type 647 printer controller implements these registers:
name size comments
BUF 8 last data item processed
INT 1 interrupt pending flag
DONE 1 device done flag
ENABLE 1 interrupt enable (PDP-9 only)
ERR 1 error flag
BPTR 7 print buffer pointer
POS 32 position in the output file
TIME 24 time from I/O initiation to interrupt
STOP_IOE 1 stop on I/O error
LBUF[0:119] 8 line buffer
The LP09 printer controller implements these registers:
name size comments
BUF 7 output character
INT 1 interrupt pending flag
DONE 1 device done flag
ENABLE 1 interrupt enable
ERR 1 error flag
POS 32 position in the output file
TIME 24 time from I/O initiation to interrupt
The LP15 printer controller implements these registers:
name size comments
STA 18 status register
MA 18 DMA memory address
INT 1 interrupt pending flag
ENABLE 1 interrupt enable
LCNT 8 line counter
BPTR 7 print buffer pointer
POS 32 position in the output file
TIME 24 time from I/O initiation to interrupt
STOP_IOE 1 stop on I/O error
LBUF[0:131] 8 line buffer
For all printers, error handling is as follows:
error STOP_IOE processed as
not attached 1 report error and stop
0 out of tape or paper
OS I/O error x report error and stop
2.2.6 Real-Time Clock (CLK)
The real-time clock (CLK) implements these registers:
name size comments
INT 1 interrupt pending flag
DONE 1 device done flag
ENABLE 1 clock enable
TIME 24 clock frequency
TPS 8 ticks per second (60 or 50)
The real-time clock autocalibrates; the clock interval is adjusted up or
down so that the clock tracks actual elapsed time.
2.2.7 Second Terminal (TTI1, TTO1)
The second terminal consists of two independent devices, TTI1 and TTO1.
The second terminal performs input and output through a Telnet session
connected to a user-specified port. The ATTACH command specifies the
port to be used:
ATTACH TTI1 <port> set up listening port
where port is a decimal number between 1 and 65535 that is not being used
for other TCP/IP activities.
Once TTI1 is attached and the simulator is running, the terminal listens
for a connection on the specified port. It assumes that the incoming
connection is a Telnet connection. The connection remain opens until
disconnected by the Telnet client, or by a DETACH TTI1 command.
The second terminal (TTI1,TTO1) can be set to one of three modes: KSR, 7B,
or 8B. In KSR mode, lower case input and output characters are converted
automatically to upper case, the high order bit is forced to one on input,
and printing of ALTmode characters is supressed. In 7B mode, input and
output characters are masked to 7 bits. In 8B mode, characters are not
modified. Changing the mode of either device changes both. The default
mode is KSR.
The SHOW TTI1 CONNECTIONS command displays the current connection to TTI1.
The SHOW TTI1 STATISTICS command displays statistics for the current connection.
The SET TTI1 DISCONNECT{=0} disconnects the current connection.
The second terminal input implements these registers:
name size comments
BUF 8 last data item processed
INT 1 interrupt pending flag
DONE 1 device done flag
TIME 24 keyboard polling interval
The second terminal output implements these registers:
name size comments
BUF 8 last data item processed
INT 1 interrupt pending flag
DONE 1 device done flag
TIME 24 time from I/O initiation to interrupt
2.3 RP15/RP02 Disk Pack (RP)
RP15 options include the ability to make units write enabled or write locked:
SET RPn LOCKED set unit n write locked
SET RPn WRITEENABLED set unit n write enabled
Units can also be set ONLINE or OFFLINE.
The RP15 implements these registers:
name size comments
STA 18 status A
STB 18 status B
DA 18 disk address
MA 18 current memory address
WC 18 word count
INT 1 interrupt pending flag
BUSY 1 control busy flag
STIME 24 seek time, per cylinder
RTIME 24 rotational delay
STOP_IOE 1 stop on I/O error
Error handling is as follows:
error STOP_IOE processed as
not attached 1 report error and stop
0 disk not ready
end of file x assume rest of disk is zero
OS I/O error x report error and stop
2.4 Type 24 Serial Drum (DRM)
The serial drum (DRM) implements these registers:
name size comments
DA 9 drum address (sector number)
MA 16 current memory address
INT 1 interrupt pending flag
DONE 1 device done flag
ERR 1 error flag
WLK 32 write lock switches
TIME 24 rotational latency, per word
STOP_IOE 1 stop on I/O error
Error handling is as follows:
error STOP_IOE processed as
not attached 1 report error and stop
0 disk not ready
Drum data files are buffered in memory; therefore, end of file and OS
I/O errors cannot occur.
2.5 RB09 Fixed Head Disk (RB)
The RB09 was an early fixed-head disk for the PDP-9. It was superceded
by the RF09/RS09. It is disabled by default.
The RB09 implements these registers:
name size comments
STA 18 status
DA 20 current disk address
WC 16 word count
MA 15 memory address
INT 1 interrupt pending flag
WLK 20 write lock switches for track groups,
10 tracks per group
TIME 24 rotational delay, per word
BURST 1 burst flag
STOP_IOE 1 stop on I/O error
The RB09 is a data break device. If BURST = 0, word transfers are
scheduled individually; if BURST = 1, the entire transfer occurs in
a single data break.
Error handling is as follows:
error STOP_IOE processed as
not attached 1 report error and stop
0 disk not ready
RB09 data files are buffered in memory; therefore, end of file and OS
I/O errors cannot occur.
2.5 RF09/RF15/RS09 Fixed Head Disk (RF)
RF09/RF15 options include the ability to set the number of platters
to a fixed value between 1 and 8, or to autosize the number of platters
from the attached file:
SET RF 1P one platter (256K)
SET RF 2P two platters (512K)
SET RF 3P three platters (768K)
SET RF 4P four platters (1024K)
SET RF 5P five platters (1280K)
SET RF 6P six platters (1536K)
SET RF 7P seven platters (1792K)
SET RF 8P eight platters (2048K)
SET RF AUTOSIZE autosized on attach
The default is AUTOSIZE.
The RF09/RF15 implements these registers:
name size comments
STA 18 status
DA 21 current disk address
WC 18 word count (in memory)
CA 18 memory address (in memory)
BUF 18 data buffer (diagnostic only)
INT 1 interrupt pending flag
WLK[0:7] 16 write lock switches for disks 0-7
TIME 24 rotational delay, per word
BURST 1 burst flag
STOP_IOE 1 stop on I/O error
The RF09/RF15 is a three-cycle data break device. If BURST = 0, word
transfers are scheduled individually; if BURST = 1, the entire transfer
occurs in a single data break.
Error handling is as follows:
error STOP_IOE processed as
not attached 1 report error and stop
0 disk not ready
RF15/RF09 data files are buffered in memory; therefore, end of file and OS
I/O errors cannot occur.
2.6 Type 550/555, TC02/TU55, and TC15/TU56 DECtape (DT)
The PDP-4 and PDP-7 use the Type 550 DECtape, a programmed I/O controller.
The PDP-9 uses the TC02, and the PDP-15 uses the TC15. The TC02 and TC15
are DMA controllers and programmatically identical. PDP-4/7 DECtape format
had 4 18b words in its block headers and trailers; PDP-9/15 DECtape format
had 5 18b words.
DECtapes drives are numbered 1-8; in the simulator, drive 8 is unit 0.
DECtape options include the ability to make units write enabled or write
locked.
SET DTn WRITEENABLED set unit n write enabled
SET DTn LOCKED set unit n write locked
Units can also be set ONLINE or OFFLINE.
The Type 550, TC02, and TC15 support supports PDP-8 format, PDP-11 format,
and 18b format DECtape images. ATTACH tries to determine the tape
format from the DECtape image; the user can force a particular format
with switches:
-r PDP-8 format
-s PDP-11 format
-t 18b format
The DECtape controller is a data-only simulator; the timing and mark
track, and block header and trailer, are not stored. Thus, the WRITE
TIMING AND MARK TRACK function is not supported; the READ ALL function
always returns the hardware standard block header and trailer; and the
WRITE ALL function dumps non-data words into the bit bucket.
The DECtape controller implements these registers:
system name size comments
all DTSA 12 status register A
all DTSB 12 status register B
all DTDB 18 data buffer
all INT 1 interrupt pending flag
9,15 ENB 1 interrupt enable flag
all DTF 1 DECtape flag
7 BEF 1 block end flag
all ERF 1 error flag
9,15 CA 18 current address (memory location 30)
9,15 WC 18 word count (memory location 31)
all LTIME 31 time between lines
all ACTIME 31 time to accelerate to full speed
all DCTIME 31 time to decelerate to a full stop
all SUBSTATE 2 read/write command substate
all POS[0:7] 32 position, in lines, units 0-7
all STATT[0:7] 18 unit state, units 0-7
It is critically important to maintain certain timing relationships
among the DECtape parameters, or the DECtape simulator will fail to
operate correctly.
- LTIME must be at least 6
- ACTIME must be less than DCTIME, and both need to be at
least 100 times LTIME
2.7 TC59/TU10 Magnetic Tape (MT)
Magnetic tape options include the ability to make units write enabled or
or write locked.
SET MTn LOCKED set unit n write locked
SET MTn WRITEENABLED set unit n write enabled
Units can also be set ONLINE or OFFLINE.
The magnetic tape controller implements these registers:
name size comments
CMD 18 command
STA 18 main status
CA 18 memory address (in memory)
WC 18 word count (in memory)
INT 1 interrupt pending flag
STOP_IOE 1 stop on I/O error
TIME 24 record delay
UST[0:7] 24 unit status, units 0-7
POS[0:7] 32 position, units 0-7
Error handling is as follows:
error processed as
not attached tape not ready; if STOP_IOE, stop
end of file bad tape
OS I/O error parity error; if STOP_IOE, stop
2.8 Symbolic Display and Input
The 18b PDP simulators implement symbolic display and input. Display is
controlled by command line switches:
-a display as ASCII character
-c display as (sixbit) character string
-m display instruction mnemonics
The PDP-15 also recognizes an additional switch:
-p display as packed ASCII (five 7b ASCII
characters in two 18b words)
Input parsing is controlled by the first character typed in or by command
line switches:
' or -a ASCII character
" or -c three character sixbit string
alphabetic instruction mnemonic
numeric octal number
The PDP-15 also recognizes an additional input mode:
# or -p five character packed ASCII string in
two 18b words
Instruction input uses standard 18b PDP assembler syntax. There are six
instruction classes: memory reference, EAE, index (PDP-15 only), IOT,
operate, and LAW.
Memory reference instructions have the format
memref {I/@} address{,X}
where I (PDP-4, PDP-7, PDP-9) /@ (PDP-15) signifies indirect reference,
and X signifies indexing (PDP-15 in page mode only). The address is an
octal number in the range 0 - 017777 (PDP-4, PDP-7, PDP-9, and PDP-15 in
bank mode) or 0 - 07777 (PDP-15 in page mode).
IOT instructions consist of single mnemonics, eg, KRB, TLS. IOT instructions
may be or'd together
iot iot iot...
IOT's may also include the number 10, signifying clear the accumulator
iot 10
The simulator does not check the legality of IOT combinations. IOT's for
which there is no opcode may be specified as IOT n, where n is an octal
number in the range 0 - 07777.
EAE instructions have the format
eae {+/- shift count}
EAE instructions may be or'd together
eae eae eae...
The simulator does not check the legality of EAE combinations. EAE's for
which there is no opcode may be specified as EAE n, where n is an octal
number in the range 0 - 037777.
Index instructions (PDP-15 only) have the format
index {immediate}
The immediate, if allowed, must be in the range of -0400 to +0377.
Operate instructions have the format
opr opr opr...
The simulator does not check the legality of the proposed combination. The
operands for MUY and DVI must be deposited explicitly.
Finally, the LAW instruction has the format
LAW immediate
where immediate is in the range of 0 to 017777.
2.9 Character Sets
The PDP-4's console was an ASR-28 Teletype; its character encoding was
Baudot. The PDP-4's line printer used a modified Hollerith character
set. The PDP-7's and PDP-9's consoles were KSR-33 Teletypes; their
character sets were basically ASCII. The PDP-7's and PDP-9's line
printers used sixbit encoding (ASCII codes 040 - 0137 masked to six
bits). The PDP-15's I/O devices were all ASCII. The following table
provides equivalences between ASCII characters and the PDP-4's I/O devices.
In the console table, FG stands for figures (upper case).
PDP-4 PDP-4
ASCII console line printer
000 - 006 none none
bell FG+024 none
010 - 011 none none
lf 010 none
013 - 014 none none
cr 002 none
016 - 037 none none
space 004 000
! FG+026 none
" FG+021 none
# FG+005 none
$ FG+062 none
% none none
& FG+013 none
' FG+032 none
( FG+036 057
) FG+011 055
* none 072
+ none 074
, FG+006 033
- FG+030 054
. FG+007 073
/ FG+027 021
0 FG+015 020
1 FG+035 001
2 FG+031 002
3 FG+020 003
4 FG+012 004
5 FG+001 005
6 FG+025 006
7 FG+034 007
8 FG+014 010
9 FG+003 011
: FG+016 none
; FG+017 none
< none 034
= none 053
> none 034
? FG+023 037
@ none {MID DOT} 040
A 030 061
B 023 062
C 016 063
D 022 064
E 020 065
F 026 066
G 013 067
H 005 070
I 014 071
J 032 041
K 036 042
L 011 043
M 007 044
N 006 045
O 003 046
P 015 047
Q 035 050
R 012 051
S 024 022
T 001 023
U 034 024
V 017 025
W 031 026
X 027 027
Y 025 030
Z 021 031
[ none none
\ none {OVERLINE} 056
] none none
^ none {UP ARROW} 035
_ none UC+040
0140 - 0177 none none