blob: aeabd9bf8861eb4edd5a15ead3481d2e1c74f126 [file] [log] [blame] [raw]
/* vax_stddev.c: VAX 3900 standard I/O devices
Copyright (c) 1998-2012, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
tti terminal input
tto terminal output
clk 100Hz and TODR clock
18-Apr-12 RMS Revised TTI to use clock coscheduling and
remove IORESET bug
13-Jan-12 MP Normalized the saved format of the TODR persistent
file so that it may be moved around from one platform
to another along with other simulator state files
(disk & tape images, save/restore files, etc.)
28-Sep-11 MP Generalized setting TODR for all OSes.
Unbound the TODR value from the 100hz clock tick
interrupt. TODR now behaves like the original
battery backed-up clock and runs with the wall
clock, not the simulated instruction clock
(except when running ROM diagnostics).
Two operational modes are available:
- Default VMS mode, which is similar to the previous
behavior in that without initializing the TODR it
would default to the value VMS would set it to if
VMS knew the correct time. This would be correct
almost all the time unless a VMS disk hadn't been
booted from for more than a year. This mode
produces strange time results for non VMS OSes on
each system boot.
- OS Agnostic mode. This mode behaves precisely like
the VAX780 TODR and works correctly for all OSes.
This mode is enabled by attaching the TODR to a
battery backup state file for the TOY clock
(i.e. sim> attach TODR TOY_CLOCK). When operating
in OS Agnostic mode, the TODR will initially start
counting from 0 and be adjusted differently when an
OS specifically writes to the TODR. On the first OS
boot with an attached TODR VMS will prompt to set
the time unless the SYSGEN parameter TIMEPROMPTWAIT
is set to 0.
05-Jan-11 MP Added Asynch I/O support
17-Aug-08 RMS Resync TODR on any clock reset
18-Jun-07 RMS Added UNIT_IDLE flag to console input, clock
17-Oct-06 RMS Synced keyboard poll to real-time clock for idling
22-Nov-05 RMS Revised for new terminal processing routines
09-Sep-04 RMS Integrated powerup into RESET (with -p)
28-May-04 RMS Removed SET TTI CTRL-C
29-Dec-03 RMS Added console backpressure support
25-Apr-03 RMS Revised for extended file support
02-Mar-02 RMS Added SET TTI CTRL-C
22-Dec-02 RMS Added console halt capability
01-Nov-02 RMS Added 7B/8B capability to terminal
12-Sep-02 RMS Removed paper tape, added variable vector support
30-May-02 RMS Widened POS to 32b
30-Apr-02 RMS Automatically set TODR to VMS-correct value during boot
*/
#include "vax_defs.h"
#include "sim_tmxr.h"
#include <time.h>
#define TTICSR_IMP (CSR_DONE + CSR_IE) /* terminal input */
#define TTICSR_RW (CSR_IE)
#define TTIBUF_ERR 0x8000 /* error */
#define TTIBUF_OVR 0x4000 /* overrun */
#define TTIBUF_FRM 0x2000 /* framing error */
#define TTIBUF_RBR 0x0400 /* receive break */
#define TTOCSR_IMP (CSR_DONE + CSR_IE) /* terminal output */
#define TTOCSR_RW (CSR_IE)
#define CLKCSR_IMP (CSR_IE) /* real-time clock */
#define CLKCSR_RW (CSR_IE)
#define CLK_DELAY 5000 /* 100 Hz */
#define TMXR_MULT 1 /* 100 Hz */
int32 tti_csr = 0; /* control/status */
uint32 tti_buftime; /* time input character arrived */
int32 tto_csr = 0; /* control/status */
int32 clk_csr = 0; /* control/status */
int32 clk_tps = 100; /* ticks/second */
int32 todr_reg = 0; /* TODR register */
int32 todr_blow = 1; /* TODR battery low */
struct todr_battery_info {
uint32 toy_gmtbase; /* GMT base of set value */
uint32 toy_gmtbasemsec; /* The milliseconds of the set value */
uint32 toy_endian_plus2; /* 2 -> Big Endian, 3 -> Little Endian, invalid otherwise */
};
typedef struct todr_battery_info TOY;
int32 tmxr_poll = CLK_DELAY * TMXR_MULT; /* term mux poll */
int32 tmr_poll = CLK_DELAY; /* pgm timer poll */
t_stat tti_svc (UNIT *uptr);
t_stat tto_svc (UNIT *uptr);
t_stat clk_svc (UNIT *uptr);
t_stat tti_reset (DEVICE *dptr);
t_stat tto_reset (DEVICE *dptr);
t_stat clk_reset (DEVICE *dptr);
t_stat clk_attach (UNIT *uptr, CONST char *cptr);
t_stat clk_detach (UNIT *uptr);
t_stat todr_resync (void);
const char *tti_description (DEVICE *dptr);
const char *tto_description (DEVICE *dptr);
const char *clk_description (DEVICE *dptr);
t_stat tti_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr);
t_stat tto_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr);
t_stat clk_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr);
extern int32 sysd_hlt_enb (void);
extern int32 fault_PC;
/* TTI data structures
tti_dev TTI device descriptor
tti_unit TTI unit descriptor
tti_reg TTI register list
*/
DIB tti_dib = { 0, 0, NULL, NULL, 1, IVCL (TTI), SCB_TTI, { NULL } };
UNIT tti_unit = { UDATA (&tti_svc, UNIT_IDLE|TT_MODE_8B, 0), TMLN_SPD_9600_BPS };
REG tti_reg[] = {
{ HRDATAD (BUF, tti_unit.buf, 16, "last data item processed") },
{ HRDATAD (CSR, tti_csr, 16, "control/status register") },
{ FLDATAD (INT, int_req[IPL_TTI], INT_V_TTI, "interrupt pending flag") },
{ FLDATAD (ERR, tti_csr, CSR_V_ERR, "error flag (CSR<15>)") },
{ FLDATAD (DONE, tti_csr, CSR_V_DONE, "device done flag (CSR<7>)") },
{ FLDATAD (IE, tti_csr, CSR_V_IE, "interrupt enable flag (CSR<6>)") },
{ DRDATAD (POS, tti_unit.pos, T_ADDR_W, "number of characters input"), PV_LEFT },
{ DRDATAD (TIME, tti_unit.wait, 24, "input polling interval"), PV_LEFT },
{ NULL }
};
MTAB tti_mod[] = {
{ TT_MODE, TT_MODE_7B, "7b", "7B", NULL, NULL, NULL, "Set 7 bit mode" },
{ TT_MODE, TT_MODE_8B, "8b", "8B", NULL, NULL, NULL, "Set 8 bit mode" },
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL, NULL, &show_vec, NULL, "Display interrupt vector" },
{ 0 }
};
DEVICE tti_dev = {
"TTI", &tti_unit, tti_reg, tti_mod,
1, 10, 31, 1, 16, 8,
NULL, NULL, &tti_reset,
NULL, NULL, NULL,
&tti_dib, 0, 0, NULL, NULL, NULL, &tti_help, NULL, NULL,
&tti_description
};
/* TTO data structures
tto_dev TTO device descriptor
tto_unit TTO unit descriptor
tto_reg TTO register list
*/
DIB tto_dib = { 0, 0, NULL, NULL, 1, IVCL (TTO), SCB_TTO, { NULL } };
UNIT tto_unit = { UDATA (&tto_svc, TT_MODE_8B, 0), SERIAL_OUT_WAIT };
REG tto_reg[] = {
{ HRDATAD (BUF, tto_unit.buf, 8, "last data item processed") },
{ HRDATAD (CSR, tto_csr, 16, "control/status register") },
{ FLDATAD (INT, int_req[IPL_TTO], INT_V_TTO, "interrupt pending flag") },
{ FLDATAD (ERR, tto_csr, CSR_V_ERR, "error flag (CSR<15>)") },
{ FLDATAD (DONE, tto_csr, CSR_V_DONE, "device done flag (CSR<7>)") },
{ FLDATAD (IE, tto_csr, CSR_V_IE, "interrupt enable flag (CSR<6>)") },
{ DRDATAD (POS, tto_unit.pos, T_ADDR_W, "number of characters input"), PV_LEFT },
{ DRDATAD (TIME, tto_unit.wait, 24, "time from I/O initiation to interrupt"), PV_LEFT },
{ NULL }
};
MTAB tto_mod[] = {
{ TT_MODE, TT_MODE_7B, "7b", "7B", NULL, NULL, NULL, "Set 7 bit mode" },
{ TT_MODE, TT_MODE_8B, "8b", "8B", NULL, NULL, NULL, "Set 8 bit mode" },
{ TT_MODE, TT_MODE_7P, "7p", "7P", NULL, NULL, NULL, "Set 7 bit mode (suppress non printing output)" },
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL, NULL, &show_vec, NULL, "Display interrupt vector" },
{ 0 }
};
DEVICE tto_dev = {
"TTO", &tto_unit, tto_reg, tto_mod,
1, 10, 31, 1, 16, 8,
NULL, NULL, &tto_reset,
NULL, NULL, NULL,
&tto_dib, 0, 0, NULL, NULL, NULL, &tto_help, NULL, NULL,
&tto_description
};
/* CLK data structures
clk_dev CLK device descriptor
clk_unit CLK unit descriptor
clk_reg CLK register list
*/
DIB clk_dib = { 0, 0, NULL, NULL, 1, IVCL (CLK), SCB_INTTIM, { NULL } };
UNIT clk_unit = { UDATA (&clk_svc, UNIT_IDLE+UNIT_FIX, sizeof(TOY)), CLK_DELAY };/* 100Hz */
REG clk_reg[] = {
{ HRDATAD (CSR, clk_csr, 16, "control/status register") },
{ FLDATAD (INT, int_req[IPL_CLK], INT_V_CLK, "interrupt pending flag") },
{ FLDATAD (IE, clk_csr, CSR_V_IE, "interrupt enable flag (CSR<6>)") },
{ DRDATAD (TODR, todr_reg, 32, "time-of-day register"), PV_LEFT },
{ FLDATAD (BLOW, todr_blow, 0, "TODR battery low indicator") },
{ DRDATAD (TIME, clk_unit.wait, 24, "initial poll interval"), REG_NZ + PV_LEFT },
{ DRDATAD (POLL, tmr_poll, 24, "calibrated poll interval"), REG_NZ + PV_LEFT + REG_HRO },
{ DRDATAD (TPS, clk_tps, 8, "ticks per second (100)"), REG_NZ + PV_LEFT },
#if defined (SIM_ASYNCH_IO)
{ DRDATAD (ASYNCH, sim_asynch_enabled, 1, "asynch I/O enabled flag"), PV_LEFT },
{ DRDATAD (LATENCY, sim_asynch_latency, 32, "desired asynch interrupt latency"), PV_LEFT },
{ DRDATAD (INST_LATENCY, sim_asynch_inst_latency, 32, "calibrated instruction latency"), PV_LEFT },
#endif
{ NULL }
};
MTAB clk_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL, NULL, &show_vec, NULL, "Display interrupt vector" },
{ 0 }
};
#define DBG_REG 1 /* TODR register access */
#define DBG_TIC 2 /* clock ticks */
DEBTAB clk_debug[] = {
{"REG", DBG_REG, "TODR register access"},
{"TIC", DBG_TIC, "clock ticks"},
{0}
};
DEVICE clk_dev = {
"CLK", &clk_unit, clk_reg, clk_mod,
1, 0, 8, 4, 0, 32,
NULL, NULL, &clk_reset,
NULL, &clk_attach, &clk_detach,
&clk_dib, DEV_DEBUG, 0, clk_debug,
NULL, NULL, &clk_help, NULL, NULL,
&clk_description
};
/* Clock and terminal MxPR routines
iccs_rd/wr interval timer
rxcs_rd/wr input control/status
rxdb_rd input buffer
txcs_rd/wr output control/status
txdb_wr output buffer
*/
int32 iccs_rd (void)
{
return (clk_csr & CLKCSR_IMP);
}
int32 rxcs_rd (void)
{
return (tti_csr & TTICSR_IMP);
}
int32 rxdb_rd (void)
{
int32 t = tti_unit.buf; /* char + error */
if (tti_csr & CSR_DONE) { /* Input pending ? */
tti_csr = tti_csr & ~CSR_DONE; /* clr done */
tti_unit.buf = tti_unit.buf & 0377; /* clr errors */
CLR_INT (TTI);
sim_activate_after_abs (&tti_unit, tti_unit.wait); /* check soon for more input */
}
return t;
}
int32 txcs_rd (void)
{
return (tto_csr & TTOCSR_IMP);
}
void iccs_wr (int32 data)
{
if ((data & CSR_IE) == 0)
CLR_INT (CLK);
if (data & CSR_DONE) /* Interrupt Acked? */
sim_rtcn_tick_ack (20, TMR_CLK); /* Let timers know */
clk_csr = (clk_csr & ~CLKCSR_RW) | (data & CLKCSR_RW);
return;
}
void rxcs_wr (int32 data)
{
if ((data & CSR_IE) == 0)
CLR_INT (TTI);
else if ((tti_csr & (CSR_DONE + CSR_IE)) == CSR_DONE)
SET_INT (TTI);
tti_csr = (tti_csr & ~TTICSR_RW) | (data & TTICSR_RW);
return;
}
void txcs_wr (int32 data)
{
if ((data & CSR_IE) == 0)
CLR_INT (TTO);
else if ((tto_csr & (CSR_DONE + CSR_IE)) == CSR_DONE)
SET_INT (TTO);
tto_csr = (tto_csr & ~TTOCSR_RW) | (data & TTOCSR_RW);
return;
}
void txdb_wr (int32 data)
{
tto_unit.buf = data & 0377;
tto_csr = tto_csr & ~CSR_DONE;
CLR_INT (TTO);
sim_activate (&tto_unit, tto_unit.wait);
return;
}
/* Terminal input routines
tti_svc process event (character ready)
tti_reset process reset
*/
t_stat tti_svc (UNIT *uptr)
{
int32 c;
sim_clock_coschedule_tmr (uptr, TMR_CLK, TMXR_MULT); /* continue poll */
if ((tti_csr & CSR_DONE) && /* input still pending and < 500ms? */
((sim_os_msec () - tti_buftime) < 500))
return SCPE_OK;
if ((c = sim_poll_kbd ()) < SCPE_KFLAG) /* no char or error? */
return c;
if (c & SCPE_BREAK) { /* break? */
if (sysd_hlt_enb ()) /* if enabled, halt */
hlt_pin = 1;
tti_unit.buf = TTIBUF_ERR | TTIBUF_FRM | TTIBUF_RBR;
}
else tti_unit.buf = sim_tt_inpcvt (c, TT_GET_MODE (uptr->flags));
tti_buftime = sim_os_msec ();
uptr->pos = uptr->pos + 1;
tti_csr = tti_csr | CSR_DONE;
if (tti_csr & CSR_IE)
SET_INT (TTI);
return SCPE_OK;
}
t_stat tti_reset (DEVICE *dptr)
{
tmxr_set_console_units (&tti_unit, &tto_unit);
tti_unit.buf = 0;
tti_csr = 0;
CLR_INT (TTI);
sim_activate (&tti_unit, tmr_poll);
return SCPE_OK;
}
t_stat tti_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr)
{
fprintf (st, "Console Terminal Input (TTI)\n\n");
fprintf (st, "The terminal input (TTI) polls the console keyboard for input.\n\n");
fprintf (st, "When the console terminal is attached to a Telnet session or the simulator is\n");
fprintf (st, "running from a Windows command prompt, it recognizes BREAK. If BREAK is\n");
fprintf (st, "entered, and BDR<7> is set (also known as SET CPU NOAUTOBOOT), control returns\n");
fprintf (st, "to the console firmware; otherwise, BREAK is treated as a normal terminal\n");
fprintf (st, "input condition.\n\n");
fprint_set_help (st, dptr);
fprint_show_help (st, dptr);
fprint_reg_help (st, dptr);
return SCPE_OK;
}
const char *tti_description (DEVICE *dptr)
{
return "console terminal input";
}
/* Terminal output routines
tto_svc process event (character typed)
tto_reset process reset
*/
t_stat tto_svc (UNIT *uptr)
{
int32 c;
t_stat r;
c = sim_tt_outcvt (tto_unit.buf, TT_GET_MODE (uptr->flags));
if (c >= 0) {
if ((r = sim_putchar_s (c)) != SCPE_OK) { /* output; error? */
sim_activate (uptr, uptr->wait); /* retry */
return ((r == SCPE_STALL)? SCPE_OK: r); /* !stall? report */
}
}
tto_csr = tto_csr | CSR_DONE;
if (tto_csr & CSR_IE)
SET_INT (TTO);
uptr->pos = uptr->pos + 1;
return SCPE_OK;
}
t_stat tto_reset (DEVICE *dptr)
{
tto_unit.buf = 0;
tto_csr = CSR_DONE;
CLR_INT (TTO);
sim_cancel (&tto_unit); /* deactivate unit */
return SCPE_OK;
}
t_stat tto_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr)
{
fprintf (st, "Console Terminal Output (TTO)\n\n");
fprintf (st, "The terminal output (TTO) writes to the simulator console.\n\n");
fprint_set_help (st, dptr);
fprint_show_help (st, dptr);
fprint_reg_help (st, dptr);
return SCPE_OK;
}
const char *tto_description (DEVICE *dptr)
{
return "console terminal output";
}
/* Clock routines
clk_svc process event (clock tick)
clk_reset process reset
todr_rd/wr time of year clock
todr_resync powerup for TODR (get date from system)
*/
t_stat clk_svc (UNIT *uptr)
{
int32 t;
if (clk_csr & CSR_IE)
SET_INT (CLK);
t = sim_rtcn_calb (clk_tps, TMR_CLK); /* calibrate clock */
sim_activate_after (&clk_unit, 1000000/clk_tps); /* reactivate unit */
tmr_poll = t; /* set tmr poll */
tmxr_poll = t * TMXR_MULT; /* set mux poll */
if (!todr_blow && todr_reg) /* if running? */
todr_reg = todr_reg + 1; /* incr TODR */
AIO_SET_INTERRUPT_LATENCY(tmr_poll*clk_tps); /* set interrrupt latency */
return SCPE_OK;
}
int32 todr_rd (void)
{
TOY *toy = (TOY *)clk_unit.filebuf;
struct timespec base, now, val;
if ((fault_PC&0xFFFE0000) == 0x20040000) { /* running from ROM? */
sim_debug (DBG_REG, &clk_dev, "todr_rd(ROM) - TODR=0x%X\n", todr_reg);
return todr_reg; /* return counted value for ROM diags */
}
if (0 == todr_reg) { /* clock running? */
sim_debug (DBG_REG, &clk_dev, "todr_rd(Not Running) - TODR=0x%X\n", todr_reg);
return todr_reg;
}
/* Maximum number of seconds which can be represented as 10ms ticks
in the 32bit TODR. This is the 33bit value 0x100000000/100 to get seconds */
#define TOY_MAX_SECS (0x40000000/25)
sim_rtcn_get_time(&now, TMR_CLK); /* get curr time */
base.tv_sec = toy->toy_gmtbase;
base.tv_nsec = toy->toy_gmtbasemsec * 1000000;
sim_timespec_diff (&val, &now, &base);
if (val.tv_sec >= TOY_MAX_SECS) { /* todr overflowed? */
sim_debug (DBG_REG, &clk_dev, "todr_rd(Overflowed) - TODR=0x%X\n", 0);
return todr_reg = 0; /* stop counting */
}
sim_debug (DBG_REG, &clk_dev, "todr_rd() - TODR=0x%X\n", (int32)(val.tv_sec*100 + val.tv_nsec/10000000));
return (int32)(val.tv_sec*100 + val.tv_nsec/10000000); /* 100hz Clock Ticks */
}
void todr_wr (int32 data)
{
TOY *toy = (TOY *)clk_unit.filebuf;
struct timespec now, val, base;
if (data) {
todr_blow = 0;
/* Save the GMT time when set value is not 0 to record the base for
future read operations in "battery backed-up" state */
sim_rtcn_get_time(&now, TMR_CLK); /* get curr time */
val.tv_sec = ((uint32)data) / 100;
val.tv_nsec = (((uint32)data) % 100) * 10000000;
sim_timespec_diff (&base, &now, &val); /* base = now - data */
toy->toy_gmtbase = (uint32)base.tv_sec;
toy->toy_gmtbasemsec = base.tv_nsec/1000000;
}
else { /* stop the clock */
toy->toy_gmtbase = 0;
toy->toy_gmtbasemsec = 0;
}
todr_reg = data;
sim_debug (DBG_REG, &clk_dev, "todr_wr(0x%X) - TODR=0x%X blow=%d\n", data, todr_reg, todr_blow);
}
/* TODR resync routine */
t_stat todr_resync (void)
{
TOY *toy = (TOY *)clk_unit.filebuf;
if (clk_unit.flags & UNIT_ATT) { /* Attached means behave like real VAX780 */
if (!toy->toy_gmtbase) /* Never set? */
todr_wr (0); /* Start ticking from 0 */
}
else { /* Not-Attached means */
uint32 base; /* behave like simh VMS default */
time_t curr;
struct tm *ctm;
struct timespec now;
sim_rtcn_get_time(&now, TMR_CLK); /* get curr time */
curr = (time_t)now.tv_sec;
if (curr == (time_t) -1) /* error? */
return SCPE_NOFNC;
ctm = localtime (&curr); /* decompose */
if (ctm == NULL) /* error? */
return SCPE_NOFNC;
base = (((((ctm->tm_yday * 24) + /* sec since 1-Jan */
ctm->tm_hour) * 60) +
ctm->tm_min) * 60) +
ctm->tm_sec;
todr_wr ((base * 100) + 0x10000000 + /* use VMS form */
(int32)(now.tv_nsec / 10000000));
}
return SCPE_OK;
}
/* Reset routine */
t_stat clk_reset (DEVICE *dptr)
{
int32 t;
clk_csr = 0;
CLR_INT (CLK);
if (!sim_is_running) { /* RESET (not IORESET)? */
t = sim_rtcn_init_unit (&clk_unit, clk_unit.wait, TMR_CLK);/* init 100Hz timer */
sim_activate_after (&clk_unit, 1000000/clk_tps); /* activate 100Hz unit */
tmr_poll = t; /* set tmr poll */
tmxr_poll = t * TMXR_MULT; /* set mux poll */
}
if (clk_unit.filebuf == NULL) { /* make sure the TODR is initialized */
clk_unit.filebuf = calloc(sizeof(TOY), 1);
if (clk_unit.filebuf == NULL)
return SCPE_MEM;
todr_resync ();
}
return SCPE_OK;
}
t_stat clk_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr)
{
fprintf (st, "Real-Time Clock (%s)\n\n", dptr->name);
fprintf (st, "The real-time clock autocalibrates; the clock interval is adjusted up or down\n");
fprintf (st, "so that the clock tracks actual elapsed time.\n\n");
fprintf (st, "There are two modes of TODR operation:\n\n");
fprintf (st, " Default VMS mode. Without initializing the TODR it returns the current\n");
fprintf (st, " time of year offset which VMS would set the clock to\n");
fprintf (st, " if VMS knew the correct time (i.e. by manual input).\n");
fprintf (st, " This is correct almost all the time unless a VMS disk\n");
fprintf (st, " hadn't been booted from in the current year. This mode\n");
fprintf (st, " produces strange time results for non VMS OSes on each\n");
fprintf (st, " system boot.\n");
fprintf (st, " OS Agnostic mode. This mode behaves precisely like the VAX780 TODR and\n");
fprintf (st, " works correctly for all OSes. This mode is enabled by\n");
fprintf (st, " attaching the %s to a battery backup state file for the\n", dptr->name);
fprintf (st, " TOY clock (i.e. sim> attach %s TOY_CLOCK). When\n", dptr->name);
fprintf (st, " operating in OS Agnostic mode, the TODR will initially\n");
fprintf (st, " start counting from 0 and be adjusted differently when\n");
fprintf (st, " an OS specifically writes to the TODR. VMS determines\n");
fprintf (st, " if the TODR currently contains a valid time if the value\n");
fprintf (st, " it sees is less than about 1 month. If the time isn't\n");
fprintf (st, " valid VMS will prompt to set the time during the system\n");
fprintf (st, " boot. While prompting for the time it will wait for an\n");
fprintf (st, " answer to the prompt for up to the SYSGEN parameter\n");
fprintf (st, " TIMEPROMPTWAIT seconds. A value of 0 for TIMEPROMPTWAIT\n");
fprintf (st, " will disable the clock setting prompt.\n");
fprint_reg_help (st, dptr);
return SCPE_OK;
}
const char *clk_description (DEVICE *dptr)
{
return "time of year clock";
}
static uint32 sim_byteswap32 (uint32 data)
{
uint8 *bdata = (uint8 *)&data;
uint8 tmp;
tmp = bdata[0];
bdata[0] = bdata[3];
bdata[3] = tmp;
tmp = bdata[1];
bdata[1] = bdata[2];
bdata[2] = tmp;
return data;
}
/* CLK attach */
t_stat clk_attach (UNIT *uptr, CONST char *cptr)
{
t_stat r;
uptr->flags = uptr->flags | (UNIT_ATTABLE | UNIT_BUFABLE);
memset (uptr->filebuf, 0, (size_t)uptr->capac);
r = attach_unit (uptr, cptr);
if (r != SCPE_OK)
uptr->flags = uptr->flags & ~(UNIT_ATTABLE | UNIT_BUFABLE);
else {
TOY *toy = (TOY *)uptr->filebuf;
uptr->hwmark = (uint32) uptr->capac;
if ((toy->toy_endian_plus2 < 2) || (toy->toy_endian_plus2 > 3))
memset (uptr->filebuf, 0, (size_t)uptr->capac);
else {
if (toy->toy_endian_plus2 != sim_end + 2) { /* wrong endian? */
toy->toy_gmtbase = sim_byteswap32 (toy->toy_gmtbase);
toy->toy_gmtbasemsec = sim_byteswap32 (toy->toy_gmtbasemsec);
}
}
toy->toy_endian_plus2 = sim_end + 2;
todr_resync ();
}
return r;
}
/* CLK detach */
t_stat clk_detach (UNIT *uptr)
{
t_stat r;
r = detach_unit (uptr);
if ((uptr->flags & UNIT_ATT) == 0)
uptr->flags = uptr->flags & ~(UNIT_ATTABLE | UNIT_BUFABLE);
return r;
}