Rivoreo Source Code Repositories
src.rivoreo.one / emulators / simh / ee0aadeb371f85eca586a39432e3e311deb15e8c / . / sim_timer.c
blob: 70a524da44eaad8fb7807a71b7fa8dac7065acdd [file] [log] [blame] [raw]
/* sim_timer.c: simulator timer library
Copyright (c) 1993-2010, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
21-Oct-11 MP Fixed throttling in several ways:
- Sleep for the observed clock tick size while throttling
- Recompute the throttling wait once every 10 seconds
to account for varying instruction mixes during
different phases of a simulator execution or to
accommodate the presence of other load on the host
system.
- Each of the pre-existing throttling modes (Kcps,
Mcps, and %) all compute the appropriate throttling
interval dynamically. These dynamic computations
assume that 100% of the host CPU is dedicated to
the current simulator during this computation.
This assumption may not always be true and under
certain conditions may never provide a way to
correctly determine the appropriate throttling
wait. An additional throttling mode has been added
which allows the simulator operator to explicitly
state the desired throttling wait parameters.
These are specified by:
SET THROT insts/delay
where 'insts' is the number of instructions to
execute before sleeping for 'delay' milliseconds.
22-Apr-11 MP Fixed Asynch I/O support to reasonably account cycles
when an idle wait is terminated by an external event
05-Jan-11 MP Added Asynch I/O support
29-Dec-10 MP Fixed clock resolution determination for Unix platforms
22-Sep-08 RMS Added "stability threshold" for idle routine
27-May-08 RMS Fixed bug in Linux idle routines (from Walter Mueller)
18-Jun-07 RMS Modified idle to exclude counted delays
22-Mar-07 RMS Added sim_rtcn_init_all
17-Oct-06 RMS Added idle support (based on work by Mark Pizzolato)
Added throttle support
16-Aug-05 RMS Fixed C++ declaration and cast problems
02-Jan-04 RMS Split out from SCP
This library includes the following routines:
sim_timer_init - initialize timing system
sim_rtc_init - initialize calibration
sim_rtc_calb - calibrate clock
sim_timer_init - initialize timing system
sim_idle - virtual machine idle
sim_os_msec - return elapsed time in msec
sim_os_sleep - sleep specified number of seconds
sim_os_ms_sleep - sleep specified number of milliseconds
sim_idle_ms_sleep - sleep specified number of milliseconds
or until awakened by an asynchronous
event
sim_timespec_diff subtract two timespec values
sim_timer_activate_after schedule unit for specific time
The calibration, idle, and throttle routines are OS-independent; the _os_
routines are not.
*/
#define NOT_MUX_USING_CODE /* sim_tmxr library provider or agnostic */
#include "sim_defs.h"
#include <ctype.h>
#include <math.h>
t_bool sim_idle_enab = FALSE; /* global flag */
volatile t_bool sim_idle_wait = FALSE; /* global flag */
static int32 sim_calb_tmr = -1; /* the system calibrated timer */
static uint32 sim_idle_rate_ms = 0;
static uint32 sim_os_sleep_min_ms = 0;
static uint32 sim_os_clock_resoluton_ms = 0;
static uint32 sim_idle_stable = SIM_IDLE_STDFLT;
static t_bool sim_idle_idled = FALSE;
static uint32 sim_throt_ms_start = 0;
static uint32 sim_throt_ms_stop = 0;
static uint32 sim_throt_type = 0;
static uint32 sim_throt_val = 0;
static uint32 sim_throt_state = 0;
static double sim_throt_cps;
static double sim_throt_inst_start;
static uint32 sim_throt_sleep_time = 0;
static int32 sim_throt_wait = 0;
static UNIT *sim_clock_unit[SIM_NTIMERS] = {NULL};
UNIT * volatile sim_clock_cosched_queue[SIM_NTIMERS] = {NULL};
t_bool sim_asynch_timer =
#if defined (SIM_ASYNCH_CLOCKS)
TRUE;
#else
FALSE;
#endif
t_stat sim_throt_svc (UNIT *uptr);
t_stat sim_timer_tick_svc (UNIT *uptr);
#define DBG_IDL TIMER_DBG_IDLE /* idling */
#define DBG_QUE TIMER_DBG_QUEUE /* queue activities */
#define DBG_MUX TIMER_DBG_MUX /* tmxr queue activities */
#define DBG_TRC 0x008 /* tracing */
#define DBG_CAL 0x010 /* calibration activities */
#define DBG_TIM 0x020 /* timer thread activities */
#define DBG_THR 0x040 /* throttle activities */
DEBTAB sim_timer_debug[] = {
{"TRACE", DBG_TRC, "Trace routine calls"},
{"IDLE", DBG_IDL, "Idling activities"},
{"QUEUE", DBG_QUE, "Event queuing activities"},
{"CALIB", DBG_CAL, "Calibration activities"},
{"TIME", DBG_TIM, "Activation an scheduling activities"},
{"THROT", DBG_THR, "Throttling activities"},
{"MUX", DBG_MUX, "Tmxr scheduling activities"},
{0}
};
#if defined(SIM_ASYNCH_IO)
uint32 sim_idle_ms_sleep (unsigned int msec)
{
uint32 start_time = sim_os_msec();
struct timespec done_time;
t_bool timedout = FALSE;
clock_gettime(CLOCK_REALTIME, &done_time);
done_time.tv_sec += (msec/1000);
done_time.tv_nsec += 1000000*(msec%1000);
if (done_time.tv_nsec > 1000000000) {
done_time.tv_sec += done_time.tv_nsec/1000000000;
done_time.tv_nsec = done_time.tv_nsec%1000000000;
}
pthread_mutex_lock (&sim_asynch_lock);
sim_idle_wait = TRUE;
if (!pthread_cond_timedwait (&sim_asynch_wake, &sim_asynch_lock, &done_time))
sim_asynch_check = 0; /* force check of asynch queue now */
else
timedout = TRUE;
sim_idle_wait = FALSE;
pthread_mutex_unlock (&sim_asynch_lock);
if (!timedout) {
AIO_UPDATE_QUEUE;
}
return sim_os_msec() - start_time;
}
#define SIM_IDLE_MS_SLEEP sim_idle_ms_sleep
#else
#define SIM_IDLE_MS_SLEEP sim_os_ms_sleep
#endif
/* Mark the need for the sim_os_set_thread_priority routine, */
/* allowing the feature and/or platform dependent code to provide it */
#define NEED_THREAD_PRIORITY
/* If we've got pthreads support then use pthreads mechanisms */
#if defined(USE_READER_THREAD)
#undef NEED_THREAD_PRIORITY
#if defined(_WIN32)
/* On Windows there are several potentially disjoint threading APIs */
/* in use (base win32 pthreads, libSDL provided threading, and direct */
/* calls to beginthreadex), so go directly to the Win32 threading APIs */
/* to manage thread priority */
t_stat sim_os_set_thread_priority (int below_normal_above)
{
const static int val[3] = {THREAD_PRIORITY_BELOW_NORMAL, THREAD_PRIORITY_NORMAL, THREAD_PRIORITY_ABOVE_NORMAL};
if ((below_normal_above < -1) || (below_normal_above > 1))
return SCPE_ARG;
SetThreadPriority (GetCurrentThread(), val[1 + below_normal_above]);
return SCPE_OK;
}
#else
/* Native pthreads priority implementation */
t_stat sim_os_set_thread_priority (int below_normal_above)
{
int sched_policy, min_prio, max_prio;
struct sched_param sched_priority;
if ((below_normal_above < -1) || (below_normal_above > 1))
return SCPE_ARG;
pthread_getschedparam (pthread_self(), &sched_policy, &sched_priority);
min_prio = sched_get_priority_min(sched_policy);
max_prio = sched_get_priority_max(sched_policy);
switch (below_normal_above) {
case PRIORITY_BELOW_NORMAL:
sched_priority.sched_priority = min_prio;
break;
case PRIORITY_NORMAL:
sched_priority.sched_priority = (max_prio + min_prio) / 2;
break;
case PRIORITY_ABOVE_NORMAL:
sched_priority.sched_priority = max_prio;
break;
}
pthread_setschedparam (pthread_self(), sched_policy, &sched_priority);
return SCPE_OK;
}
#endif
#endif /* defined(USE_READER_THREAD) */
/* OS-dependent timer and clock routines */
/* VMS */
#if defined (VMS)
#if defined (__VAX)
#define sys$gettim SYS$GETTIM
#define sys$setimr SYS$SETIMR
#define lib$emul LIB$EMUL
#define sys$waitfr SYS$WAITFR
#define lib$subx LIB$SUBX
#define lib$ediv LIB$EDIV
#endif
#include <starlet.h>
#include <lib$routines.h>
#include <unistd.h>
const t_bool rtc_avail = TRUE;
uint32 sim_os_msec (void)
{
uint32 quo, htod, tod[2];
int32 i;
sys$gettim (tod); /* time 0.1usec */
/* To convert to msec, must divide a 64b quantity by 10000. This is actually done
by dividing the 96b quantity 0'time by 10000, producing 64b of quotient, the
high 32b of which are discarded. This can probably be done by a clever multiply...
*/
quo = htod = 0;
for (i = 0; i < 64; i++) { /* 64b quo */
htod = (htod << 1) | ((tod[1] >> 31) & 1); /* shift divd */
tod[1] = (tod[1] << 1) | ((tod[0] >> 31) & 1);
tod[0] = tod[0] << 1;
quo = quo << 1; /* shift quo */
if (htod >= 10000) { /* divd work? */
htod = htod - 10000; /* subtract */
quo = quo | 1; /* set quo bit */
}
}
return quo;
}
void sim_os_sleep (unsigned int sec)
{
sleep (sec);
return;
}
uint32 sim_os_ms_sleep_init (void)
{
#if defined (__VAX)
sim_os_sleep_min_ms = 10; /* VAX/VMS is 10ms */
#else
sim_os_sleep_min_ms = 1; /* Alpha/VMS is 1ms */
#endif
return sim_os_sleep_min_ms;
}
uint32 sim_os_ms_sleep (unsigned int msec)
{
uint32 stime = sim_os_msec ();
uint32 qtime[2];
int32 nsfactor = -10000;
static int32 zero = 0;
lib$emul (&msec, &nsfactor, &zero, qtime);
sys$setimr (2, qtime, 0, 0);
sys$waitfr (2);
return sim_os_msec () - stime;
}
#ifdef NEED_CLOCK_GETTIME
int clock_gettime(int clk_id, struct timespec *tp)
{
uint32 secs, ns, tod[2], unixbase[2] = {0xd53e8000, 0x019db1de};
if (clk_id != CLOCK_REALTIME)
return -1;
sys$gettim (tod); /* time 0.1usec */
lib$subx(tod, unixbase, tod); /* convert to unix base */
lib$ediv(&10000000, tod, &secs, &ns); /* isolate seconds & 100ns parts */
tp->tv_sec = secs;
tp->tv_nsec = ns*100;
return 0;
}
#endif /* CLOCK_REALTIME */
#elif defined (_WIN32)
/* Win32 routines */
const t_bool rtc_avail = TRUE;
uint32 sim_os_msec (void)
{
if (sim_idle_rate_ms)
return timeGetTime ();
else return GetTickCount ();
}
void sim_os_sleep (unsigned int sec)
{
Sleep (sec * 1000);
return;
}
void sim_timer_exit (void)
{
timeEndPeriod (sim_idle_rate_ms);
return;
}
uint32 sim_os_ms_sleep_init (void)
{
TIMECAPS timers;
if (timeGetDevCaps (&timers, sizeof (timers)) != TIMERR_NOERROR)
return 0;
sim_os_sleep_min_ms = timers.wPeriodMin;
if ((timers.wPeriodMin == 0) || (timers.wPeriodMin > SIM_IDLE_MAX))
return 0;
if (timeBeginPeriod (timers.wPeriodMin) != TIMERR_NOERROR)
return 0;
atexit (sim_timer_exit);
Sleep (1);
Sleep (1);
Sleep (1);
Sleep (1);
Sleep (1);
return sim_os_sleep_min_ms; /* sim_idle_rate_ms */
}
uint32 sim_os_ms_sleep (unsigned int msec)
{
uint32 stime = sim_os_msec();
Sleep (msec);
return sim_os_msec () - stime;
}
#if defined(NEED_CLOCK_GETTIME)
int clock_gettime(int clk_id, struct timespec *tp)
{
t_uint64 now, unixbase;
if (clk_id != CLOCK_REALTIME)
return -1;
unixbase = 116444736;
unixbase *= 1000000000;
GetSystemTimeAsFileTime((FILETIME*)&now);
now -= unixbase;
tp->tv_sec = (long)(now/10000000);
tp->tv_nsec = (now%10000000)*100;
return 0;
}
#endif
#elif defined (__OS2__)
/* OS/2 routines, from Bruce Ray */
const t_bool rtc_avail = FALSE;
uint32 sim_os_msec (void)
{
return 0;
}
void sim_os_sleep (unsigned int sec)
{
return;
}
uint32 sim_os_ms_sleep_init (void)
{
return 0;
}
uint32 sim_os_ms_sleep (unsigned int msec)
{
return 0;
}
/* Metrowerks CodeWarrior Macintosh routines, from Ben Supnik */
#elif defined (__MWERKS__) && defined (macintosh)
#include <Timer.h>
#include <Mactypes.h>
#include <sioux.h>
#include <unistd.h>
#include <siouxglobals.h>
#define NANOS_PER_MILLI 1000000
#define MILLIS_PER_SEC 1000
const t_bool rtc_avail = TRUE;
uint32 sim_os_msec (void)
{
unsigned long long micros;
UnsignedWide macMicros;
unsigned long millis;
Microseconds (&macMicros);
micros = *((unsigned long long *) &macMicros);
millis = micros / 1000LL;
return (uint32) millis;
}
void sim_os_sleep (unsigned int sec)
{
sleep (sec);
return;
}
uint32 sim_os_ms_sleep_init (void)
{
return sim_os_sleep_min_ms = 1;
}
uint32 sim_os_ms_sleep (unsigned int milliseconds)
{
uint32 stime = sim_os_msec ();
struct timespec treq;
treq.tv_sec = milliseconds / MILLIS_PER_SEC;
treq.tv_nsec = (milliseconds % MILLIS_PER_SEC) * NANOS_PER_MILLI;
(void) nanosleep (&treq, NULL);
return sim_os_msec () - stime;
}
#if defined(NEED_CLOCK_GETTIME)
int clock_gettime(int clk_id, struct timespec *tp)
{
struct timeval cur;
struct timezone foo;
if (clk_id != CLOCK_REALTIME)
return -1;
gettimeofday (&cur, &foo);
tp->tv_sec = cur.tv_sec;
tp->tv_nsec = cur.tv_usec*1000;
return 0;
}
#endif
#else
/* UNIX routines */
#include <time.h>
#include <sys/time.h>
#include <unistd.h>
#define NANOS_PER_MILLI 1000000
#define MILLIS_PER_SEC 1000
#define sleep1Samples 100
const t_bool rtc_avail = TRUE;
uint32 sim_os_msec (void)
{
struct timeval cur;
struct timezone foo;
uint32 msec;
gettimeofday (&cur, &foo);
msec = (((uint32) cur.tv_sec) * 1000) + (((uint32) cur.tv_usec) / 1000);
return msec;
}
void sim_os_sleep (unsigned int sec)
{
sleep (sec);
return;
}
uint32 sim_os_ms_sleep_init (void)
{
uint32 i, t1, t2, tot, tim;
SIM_IDLE_MS_SLEEP (1); /* Start sampling on a tick boundary */
for (i = 0, tot = 0; i < sleep1Samples; i++) {
t1 = sim_os_msec ();
SIM_IDLE_MS_SLEEP (1);
t2 = sim_os_msec ();
tot += (t2 - t1);
}
tim = (tot + (sleep1Samples - 1)) / sleep1Samples;
sim_os_sleep_min_ms = tim;
if (tim > SIM_IDLE_MAX)
tim = 0;
return tim;
}
#if !defined(_POSIX_SOURCE)
#ifdef NEED_CLOCK_GETTIME
typedef int clockid_t;
int clock_gettime(clockid_t clk_id, struct timespec *tp)
{
struct timeval cur;
struct timezone foo;
if (clk_id != CLOCK_REALTIME)
return -1;
gettimeofday (&cur, &foo);
tp->tv_sec = cur.tv_sec;
tp->tv_nsec = cur.tv_usec*1000;
return 0;
}
#endif /* CLOCK_REALTIME */
#endif /* !defined(_POSIX_SOURCE) && defined(SIM_ASYNCH_IO) */
uint32 sim_os_ms_sleep (unsigned int milliseconds)
{
uint32 stime = sim_os_msec ();
struct timespec treq;
treq.tv_sec = milliseconds / MILLIS_PER_SEC;
treq.tv_nsec = (milliseconds % MILLIS_PER_SEC) * NANOS_PER_MILLI;
(void) nanosleep (&treq, NULL);
return sim_os_msec () - stime;
}
#if defined(NEED_THREAD_PRIORITY)
#undef NEED_THREAD_PRIORITY
#include <sys/time.h>
#include <sys/resource.h>
t_stat sim_os_set_thread_priority (int below_normal_above)
{
if ((below_normal_above < -1) || (below_normal_above > 1))
return SCPE_ARG;
errno = 0;
switch (below_normal_above) {
case PRIORITY_BELOW_NORMAL:
if ((getpriority (PRIO_PROCESS, 0) <= 0) && /* at or above normal pri? */
(errno == 0))
setpriority (PRIO_PROCESS, 0, 10);
break;
case PRIORITY_NORMAL:
if (getpriority (PRIO_PROCESS, 0) != 0) /* at or above normal pri? */
setpriority (PRIO_PROCESS, 0, 0);
break;
case PRIORITY_ABOVE_NORMAL:
if ((getpriority (PRIO_PROCESS, 0) <= 0) && /* at or above normal pri? */
(errno == 0))
setpriority (PRIO_PROCESS, 0, -10);
break;
}
return SCPE_OK;
}
#endif /* defined(NEED_THREAD_PRIORITY) */
#endif
/* If one hasn't been provided yet, then just stub it */
#if defined(NEED_THREAD_PRIORITY)
t_stat sim_os_set_thread_priority (int below_normal_above)
{
return SCPE_OK;
}
#endif
/* diff = min - sub */
void
sim_timespec_diff (struct timespec *diff, struct timespec *min, struct timespec *sub)
{
/* move the minuend value to the difference and operate there. */
*diff = *min;
/* Borrow as needed for the nsec value */
while (sub->tv_nsec > diff->tv_nsec) {
--diff->tv_sec;
diff->tv_nsec += 1000000000;
}
diff->tv_nsec -= sub->tv_nsec;
diff->tv_sec -= sub->tv_sec;
/* Normalize the result */
while (diff->tv_nsec > 1000000000) {
++diff->tv_sec;
diff->tv_nsec -= 1000000000;
}
}
#if defined(SIM_ASYNCH_IO) && defined(SIM_ASYNCH_CLOCKS)
static int sim_timespec_compare (struct timespec *a, struct timespec *b)
{
while (a->tv_nsec > 1000000000) {
a->tv_nsec -= 1000000000;
++a->tv_sec;
}
while (b->tv_nsec > 1000000000) {
b->tv_nsec -= 1000000000;
++b->tv_sec;
}
if (a->tv_sec < b->tv_sec)
return -1;
if (a->tv_sec > b->tv_sec)
return 1;
if (a->tv_nsec < b->tv_nsec)
return -1;
if (a->tv_nsec > b->tv_nsec)
return 1;
else
return 0;
}
#endif /* defined(SIM_ASYNCH_IO) && defined(SIM_ASYNCH_CLOCKS) */
/* OS independent clock calibration package */
static int32 rtc_ticks[SIM_NTIMERS] = { 0 }; /* ticks */
static int32 rtc_hz[SIM_NTIMERS] = { 0 }; /* tick rate */
static uint32 rtc_rtime[SIM_NTIMERS] = { 0 }; /* real time */
static uint32 rtc_vtime[SIM_NTIMERS] = { 0 }; /* virtual time */
static double rtc_gtime[SIM_NTIMERS] = { 0 }; /* instruction time */
static uint32 rtc_nxintv[SIM_NTIMERS] = { 0 }; /* next interval */
static int32 rtc_based[SIM_NTIMERS] = { 0 }; /* base delay */
static int32 rtc_currd[SIM_NTIMERS] = { 0 }; /* current delay */
static int32 rtc_initd[SIM_NTIMERS] = { 0 }; /* initial delay */
static uint32 rtc_elapsed[SIM_NTIMERS] = { 0 }; /* sec since init */
static uint32 rtc_calibrations[SIM_NTIMERS] = { 0 }; /* calibration count */
static double rtc_clock_skew_max[SIM_NTIMERS] = { 0 }; /* asynchronous max skew */
UNIT sim_timer_units[SIM_NTIMERS+2]; /* one for each timer and one for throttle */
/* plus one for an internal clock if no clocks are registered */
void sim_rtcn_init_all (void)
{
uint32 i;
for (i = 0; i < SIM_NTIMERS; i++)
if (rtc_initd[i] != 0)
sim_rtcn_init (rtc_initd[i], i);
return;
}
int32 sim_rtcn_init (int32 time, int32 tmr)
{
return sim_rtcn_init_unit (NULL, time, tmr);
}
int32 sim_rtcn_init_unit (UNIT *uptr, int32 time, int32 tmr)
{
sim_debug (DBG_CAL, &sim_timer_dev, "sim_rtcn_init(time=%d, tmr=%d)\n", time, tmr);
if (time == 0)
time = 1;
if ((tmr < 0) || (tmr >= SIM_NTIMERS))
return time;
if (uptr) {
if (uptr != &sim_timer_units[SIM_NTIMERS+1]) { /* New unit not internal timer */
if ((tmr == SIM_NTIMERS-1) && /* but replacing default internal timer */
(sim_clock_unit[tmr] == &sim_timer_units[SIM_NTIMERS+1])) { /* remove internal timer */
sim_cancel (sim_clock_unit[tmr]);
sim_clock_unit[tmr] = NULL;
rtc_initd[tmr] = rtc_currd[tmr] = 0;
if (tmr == sim_calb_tmr)
sim_calb_tmr = -1;
}
}
if (!sim_clock_unit[tmr]) {
sim_clock_unit[tmr] = uptr;
sim_clock_cosched_queue[tmr] = QUEUE_LIST_END;
}
}
rtc_rtime[tmr] = sim_os_msec ();
rtc_vtime[tmr] = rtc_rtime[tmr];
rtc_nxintv[tmr] = 1000;
rtc_ticks[tmr] = 0;
rtc_hz[tmr] = 0;
if (rtc_currd[tmr]) /* A previously calibrated value is better than a constant */
time = rtc_currd[tmr];
rtc_based[tmr] = time;
rtc_currd[tmr] = time;
rtc_initd[tmr] = time;
rtc_elapsed[tmr] = 0;
rtc_calibrations[tmr] = 0;
if (sim_calb_tmr == -1) /* save first initialized clock as the system timer */
sim_calb_tmr = tmr;
return time;
}
int32 sim_rtcn_calb (int32 ticksper, int32 tmr)
{
uint32 new_rtime, delta_rtime;
int32 delta_vtime;
double new_gtime;
int32 new_currd;
if ((tmr < 0) || (tmr >= SIM_NTIMERS))
return 10000;
rtc_hz[tmr] = ticksper;
rtc_ticks[tmr] = rtc_ticks[tmr] + 1; /* count ticks */
if (rtc_ticks[tmr] < ticksper) { /* 1 sec yet? */
return rtc_currd[tmr];
}
rtc_ticks[tmr] = 0; /* reset ticks */
rtc_elapsed[tmr] = rtc_elapsed[tmr] + 1; /* count sec */
if (sim_throt_type != SIM_THROT_NONE) {
rtc_gtime[tmr] = sim_gtime(); /* save instruction time */
rtc_currd[tmr] = (int32)(sim_throt_cps / ticksper); /* use throttle calibration */
++rtc_calibrations[tmr]; /* count calibrations */
sim_debug (DBG_CAL, &sim_timer_dev, "using throttle calibrated value - result: %d\n", rtc_currd[tmr]);
return rtc_currd[tmr];
}
if (!rtc_avail) { /* no timer? */
return rtc_currd[tmr];
}
if (sim_calb_tmr != tmr) {
rtc_currd[tmr] = (int32)(sim_timer_inst_per_sec()/ticksper);
sim_debug (DBG_CAL, &sim_timer_dev, "calibrated calibrated tmr=%d against system tmr=%d, tickper=%d (result: %d)\n", tmr, sim_calb_tmr, ticksper, rtc_currd[tmr]);
return rtc_currd[tmr];
}
new_rtime = sim_os_msec (); /* wall time */
sim_debug (DBG_TRC, &sim_timer_dev, "sim_rtcn_calb(ticksper=%d, tmr=%d)\n", ticksper, tmr);
if (sim_idle_idled) {
rtc_rtime[tmr] = new_rtime; /* save wall time */
rtc_vtime[tmr] = rtc_vtime[tmr] + 1000; /* adv sim time */
rtc_gtime[tmr] = sim_gtime(); /* save instruction time */
sim_idle_idled = FALSE; /* reset idled flag */
sim_debug (DBG_CAL, &sim_timer_dev, "skipping calibration due to idling - result: %d\n", rtc_currd[tmr]);
return rtc_currd[tmr]; /* avoid calibrating idle checks */
}
if (new_rtime < rtc_rtime[tmr]) { /* time running backwards? */
rtc_rtime[tmr] = new_rtime; /* reset wall time */
sim_debug (DBG_CAL, &sim_timer_dev, "time running backwards - result: %d\n", rtc_currd[tmr]);
return rtc_currd[tmr]; /* can't calibrate */
}
++rtc_calibrations[tmr]; /* count calibrations */
delta_rtime = new_rtime - rtc_rtime[tmr]; /* elapsed wtime */
rtc_rtime[tmr] = new_rtime; /* adv wall time */
rtc_vtime[tmr] = rtc_vtime[tmr] + 1000; /* adv sim time */
if (delta_rtime > 30000) { /* gap too big? */
/* This simulator process has somehow been suspended for a significant */
/* amount of time. This will certainly happen if the host system has */
/* slept or hibernated. It also might happen when a simulator */
/* developer stops the simulator at a breakpoint (a process, not simh */
/* breakpoint). To accomodate this, we set the calibration state to */
/* ignore what happened and proceed from here. */
rtc_vtime[tmr] = rtc_rtime[tmr]; /* sync virtual and real time */
rtc_nxintv[tmr] = 1000; /* reset next interval */
rtc_gtime[tmr] = sim_gtime(); /* save instruction time */
sim_debug (DBG_CAL, &sim_timer_dev, "gap too big: delta = %d - result: %d\n", delta_rtime, rtc_currd[tmr]);
return rtc_currd[tmr]; /* can't calibr */
}
new_gtime = sim_gtime();
if (sim_asynch_enabled && sim_asynch_timer) {
if (rtc_elapsed[tmr] > sim_idle_stable) {
/* An asynchronous clock, merely needs to divide the number of */
/* instructions actually executed by the clock rate. */
new_currd = (int32)((new_gtime - rtc_gtime[tmr])/ticksper);
/* avoid excessive swings in the calibrated result */
if (new_currd > 10*rtc_currd[tmr]) /* don't swing big too fast */
new_currd = 10*rtc_currd[tmr];
else
if (new_currd < rtc_currd[tmr]/10) /* don't swing small too fast */
new_currd = rtc_currd[tmr]/10;
rtc_currd[tmr] = new_currd;
rtc_gtime[tmr] = new_gtime; /* save instruction time */
if (rtc_currd[tmr] == 127) {
sim_debug (DBG_CAL, &sim_timer_dev, "asynch calibration small: %d\n", rtc_currd[tmr]);
}
sim_debug (DBG_CAL, &sim_timer_dev, "asynch calibration result: %d\n", rtc_currd[tmr]);
return rtc_currd[tmr]; /* calibrated result */
}
else {
rtc_currd[tmr] = rtc_initd[tmr];
rtc_gtime[tmr] = new_gtime; /* save instruction time */
sim_debug (DBG_CAL, &sim_timer_dev, "asynch not stable calibration result: %d\n", rtc_initd[tmr]);
return rtc_initd[tmr]; /* initial result until stable */
}
}
rtc_gtime[tmr] = new_gtime; /* save instruction time */
/* This self regulating algorithm depends directly on the assumption */
/* that this routine is called back after processing the number of */
/* instructions which was returned the last time it was called. */
if (delta_rtime == 0) /* gap too small? */
rtc_based[tmr] = rtc_based[tmr] * ticksper; /* slew wide */
else rtc_based[tmr] = (int32) (((double) rtc_based[tmr] * (double) rtc_nxintv[tmr]) /
((double) delta_rtime)); /* new base rate */
delta_vtime = rtc_vtime[tmr] - rtc_rtime[tmr]; /* gap */
if (delta_vtime > SIM_TMAX) /* limit gap */
delta_vtime = SIM_TMAX;
else if (delta_vtime < -SIM_TMAX)
delta_vtime = -SIM_TMAX;
rtc_nxintv[tmr] = 1000 + delta_vtime; /* next wtime */
rtc_currd[tmr] = (int32) (((double) rtc_based[tmr] * (double) rtc_nxintv[tmr]) /
1000.0); /* next delay */
if (rtc_based[tmr] <= 0) /* never negative or zero! */
rtc_based[tmr] = 1;
if (rtc_currd[tmr] <= 0) /* never negative or zero! */
rtc_currd[tmr] = 1;
sim_debug (DBG_CAL, &sim_timer_dev, "calibrated tmr=%d, tickper=%d (base=%d, nxintv=%u, result: %d)\n", tmr, ticksper, rtc_based[tmr], rtc_nxintv[tmr], rtc_currd[tmr]);
AIO_SET_INTERRUPT_LATENCY(rtc_currd[tmr]*ticksper); /* set interrrupt latency */
return rtc_currd[tmr];
}
/* Prior interfaces - default to timer 0 */
int32 sim_rtc_init (int32 time)
{
return sim_rtcn_init (time, 0);
}
int32 sim_rtc_calb (int32 ticksper)
{
return sim_rtcn_calb (ticksper, 0);
}
/* sim_timer_init - get minimum sleep time available on this host */
t_bool sim_timer_init (void)
{
int i;
uint32 clock_start, clock_last, clock_now;
sim_debug (DBG_TRC, &sim_timer_dev, "sim_timer_init()\n");
for (i=0; i<SIM_NTIMERS; i++) {
sim_timer_units[i].action = &sim_timer_tick_svc;
sim_timer_units[i].flags = UNIT_DIS | UNIT_IDLE;
}
sim_timer_units[SIM_NTIMERS].action = &sim_throt_svc;
sim_timer_units[SIM_NTIMERS].flags = UNIT_DIS | UNIT_IDLE;
sim_register_internal_device (&sim_timer_dev);
sim_idle_enab = FALSE; /* init idle off */
sim_idle_rate_ms = sim_os_ms_sleep_init (); /* get OS timer rate */
clock_last = clock_start = sim_os_msec ();
sim_os_clock_resoluton_ms = 1000;
do {
uint32 clock_diff;
clock_now = sim_os_msec ();
clock_diff = clock_now - clock_last;
if ((clock_diff > 0) && (clock_diff < sim_os_clock_resoluton_ms))
sim_os_clock_resoluton_ms = clock_diff;
clock_last = clock_now;
} while (clock_now < clock_start + 100);
return (sim_idle_rate_ms != 0);
}
/* sim_timer_idle_capable - tell if the host is Idle capable and what the host OS tick size is */
t_bool sim_timer_idle_capable (uint32 *host_ms_sleep_1, uint32 *host_tick_ms)
{
if (host_tick_ms)
*host_tick_ms = sim_os_clock_resoluton_ms;
if (host_ms_sleep_1)
*host_ms_sleep_1 = sim_os_sleep_min_ms;
return (sim_idle_rate_ms != 0);
}
/* sim_show_timers - show running timer information */
t_stat sim_show_timers (FILE* st, DEVICE *dptr, UNIT* uptr, int32 val, CONST char* desc)
{
int tmr, clocks;
fprintf (st, "Minimum Host Sleep Time: %dms\n", sim_os_sleep_min_ms);
fprintf (st, "Host Clock Resolution: %dms\n", sim_os_clock_resoluton_ms);
fprintf (st, "Time before Clock Calibration: %d seconds\n\n", sim_idle_stable);
for (tmr=clocks=0; tmr<SIM_NTIMERS; ++tmr) {
if (0 == rtc_initd[tmr])
continue;
if (sim_clock_unit[tmr]) {
++clocks;
fprintf (st, "%s clock device is %s\n", sim_name, sim_uname(sim_clock_unit[tmr]));
}
fprintf (st, "%s%sTimer %d:\n", (sim_asynch_enabled && sim_asynch_timer) ? "Asynchronous " : "", rtc_hz[tmr] ? "Calibrated " : "Uncalibrated ", tmr);
if (rtc_hz[tmr]) {
fprintf (st, " Running at: %dhz\n", rtc_hz[tmr]);
fprintf (st, " Ticks in current second: %d\n", rtc_ticks[tmr]);
}
fprintf (st, " Seconds Running: %u\n", rtc_elapsed[tmr]);
fprintf (st, " Calibrations: %u\n", rtc_calibrations[tmr]);
fprintf (st, " Instruction Time: %.0f\n", rtc_gtime[tmr]);
if (!(sim_asynch_enabled && sim_asynch_timer) && (sim_throt_type == SIM_THROT_NONE)) {
fprintf (st, " Real Time: %u\n", rtc_rtime[tmr]);
fprintf (st, " Virtual Time: %u\n", rtc_vtime[tmr]);
fprintf (st, " Next Interval: %u\n", rtc_nxintv[tmr]);
fprintf (st, " Base Tick Delay: %d\n", rtc_based[tmr]);
fprintf (st, " Initial Insts Per Tick: %d\n", rtc_initd[tmr]);
}
fprintf (st, " Current Insts Per Tick: %d\n", rtc_currd[tmr]);
if (rtc_clock_skew_max[tmr] != 0.0)
fprintf (st, " Peak Clock Skew: %.0fms\n", rtc_clock_skew_max[tmr]);
}
if (clocks == 0)
fprintf (st, "%s clock device is not specified, co-scheduling is unavailable\n", sim_name);
return SCPE_OK;
}
t_stat sim_show_clock_queues (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, CONST char *cptr)
{
#if defined (SIM_ASYNCH_IO)
int tmr;
pthread_mutex_lock (&sim_timer_lock);
if (sim_wallclock_queue == QUEUE_LIST_END)
fprintf (st, "%s wall clock event queue empty\n", sim_name);
else {
fprintf (st, "%s wall clock event queue status\n", sim_name);
for (uptr = sim_wallclock_queue; uptr != QUEUE_LIST_END; uptr = uptr->a_next) {
if ((dptr = find_dev_from_unit (uptr)) != NULL) {
fprintf (st, " %s", sim_dname (dptr));
if (dptr->numunits > 1)
fprintf (st, " unit %d", (int32) (uptr - dptr->units));
}
else fprintf (st, " Unknown");
fprintf (st, " after ");
fprint_val (st, (t_value)uptr->a_usec_delay, 10, 0, PV_RCOMMA);
fprintf (st, " usec\n");
}
}
if (sim_asynch_timer) {
for (tmr=0; tmr<SIM_NTIMERS; ++tmr) {
if (sim_clock_unit[tmr] == NULL)
continue;
if (sim_clock_cosched_queue[tmr] != QUEUE_LIST_END) {
fprintf (st, "%s clock (%s) co-schedule event queue status\n",
sim_name, sim_uname(sim_clock_unit[tmr]));
for (uptr = sim_clock_cosched_queue[tmr]; uptr != QUEUE_LIST_END; uptr = uptr->a_next) {
if ((dptr = find_dev_from_unit (uptr)) != NULL) {
fprintf (st, " %s", sim_dname (dptr));
if (dptr->numunits > 1)
fprintf (st, " unit %d", (int32) (uptr - dptr->units));
}
else fprintf (st, " Unknown");
fprintf (st, "\n");
}
}
}
}
pthread_mutex_unlock (&sim_timer_lock);
#endif /* SIM_ASYNCH_IO */
return SCPE_OK;
}
REG sim_timer_reg[] = {
{ DRDATAD (TICKS_PER_SEC, rtc_hz[0], 32, "Ticks Per Second"), PV_RSPC|REG_RO},
{ DRDATAD (INSTS_PER_TICK, rtc_currd[0], 32, "Instructions Per Tick"), PV_RSPC|REG_RO},
{ FLDATAD (IDLE_ENAB, sim_idle_enab, 0, "Idle Enabled"), REG_RO},
{ DRDATAD (IDLE_RATE_MS, sim_idle_rate_ms, 32, "Idle Rate Milliseconds"), PV_RSPC|REG_RO},
{ DRDATAD (OS_SLEEP_MIN_MS, sim_os_sleep_min_ms, 32, "Minimum Sleep Resolution"), PV_RSPC|REG_RO},
{ DRDATAD (IDLE_STABLE, sim_idle_stable, 32, "Idle Stable"), PV_RSPC},
{ FLDATAD (IDLE_IDLED, sim_idle_idled, 0, ""), REG_RO},
{ DRDATAD (TMR, sim_calb_tmr, 32, ""), PV_RSPC|REG_RO},
{ DRDATAD (THROT_MS_START, sim_throt_ms_start, 32, ""), PV_RSPC|REG_RO},
{ DRDATAD (THROT_MS_STOP, sim_throt_ms_stop, 32, ""), PV_RSPC|REG_RO},
{ DRDATAD (THROT_TYPE, sim_throt_type, 32, ""), PV_RSPC|REG_RO},
{ DRDATAD (THROT_VAL, sim_throt_val, 32, ""), PV_RSPC|REG_RO},
{ DRDATAD (THROT_STATE, sim_throt_state, 32, ""), PV_RSPC|REG_RO},
{ DRDATAD (THROT_SLEEP_TIME, sim_throt_sleep_time, 32, ""), PV_RSPC|REG_RO},
{ DRDATAD (THROT_WAIT, sim_throt_wait, 32, ""), PV_RSPC|REG_RO},
{ NULL }
};
/* Clear, Set and show asynch */
/* Clear asynch */
t_stat sim_timer_clr_async (UNIT *uptr, int32 val, char *cptr, void *desc)
{
if (sim_asynch_timer) {
sim_asynch_timer = FALSE;
sim_timer_change_asynch ();
}
return SCPE_OK;
}
t_stat sim_timer_set_async (UNIT *uptr, int32 val, char *cptr, void *desc)
{
if (!sim_asynch_timer) {
sim_asynch_timer = TRUE;
sim_timer_change_asynch ();
}
return SCPE_OK;
}
t_stat sim_timer_show_async (FILE *st, UNIT *uptr, int32 val, void *desc)
{
fprintf (st, "%s", (sim_asynch_enabled && sim_asynch_timer) ? "Asynchronous" : "Synchronous");
return SCPE_OK;
}
MTAB sim_timer_mod[] = {
#if defined (SIM_ASYNCH_IO) && defined (SIM_ASYNCH_CLOCKS)
{ MTAB_VDV, MTAB_VDV, "ASYNC", "ASYNC", &sim_timer_set_async, &sim_timer_show_async, NULL, "Enables/Displays Asynchronous Timer operation mode" },
{ MTAB_VDV, 0, NULL, "NOASYNC", &sim_timer_clr_async, NULL, NULL, "Disables Asynchronous Timer operation" },
#endif
{ 0 },
};
static t_stat sim_timer_clock_reset (DEVICE *dptr);
DEVICE sim_timer_dev = {
"TIMER", sim_timer_units, sim_timer_reg, sim_timer_mod,
SIM_NTIMERS+2, 0, 0, 0, 0, 0,
NULL, NULL, &sim_timer_clock_reset, NULL, NULL, NULL,
NULL, DEV_DEBUG | DEV_NOSAVE, 0, sim_timer_debug};
/* sim_idle - idle simulator until next event or for specified interval
Inputs:
tmr = calibrated timer to use
Must solve the linear equation
ms_to_wait = w * ms_per_wait
Or
w = ms_to_wait / ms_per_wait
*/
t_bool sim_idle (uint32 tmr, t_bool sin_cyc)
{
static uint32 cyc_ms = 0;
uint32 w_ms, w_idle, act_ms;
int32 act_cyc;
if ((!sim_idle_enab) || /* idling disabled */
((sim_clock_queue == QUEUE_LIST_END) && /* or clock queue empty? */
(!(sim_asynch_enabled && sim_asynch_timer)))|| /* and not asynch? */
((sim_clock_queue != QUEUE_LIST_END) && /* or clock queue not empty */
((sim_clock_queue->flags & UNIT_IDLE) == 0))|| /* and event not idle-able? */
(rtc_elapsed[tmr] < sim_idle_stable)) { /* or timer not stable? */
if (sin_cyc)
sim_interval = sim_interval - 1;
return FALSE;
}
/*
When a simulator is in an instruction path (or under other conditions
which would indicate idling), the countdown of sim_interval will not
be happening at a pace which is consistent with the rate it happens
when not in the 'idle capable' state. The consequence of this is that
the clock calibration may produce calibrated results which vary much
more than they do when not in the idle able state. Sim_idle also uses
the calibrated tick size to approximate an adjustment to sim_interval
to reflect the number of instructions which would have executed during
the actual idle time, so consistent calibrated numbers produce better
adjustments.
To negate this effect, we set a flag (sim_idle_idled) here and the
sim_rtcn_calb routine checks this flag before performing an actual
calibration and skips calibration if the flag was set and then clears
the flag. Thus recalibration only happens if things didn't idle.
we also check check sim_idle_enab above so that all simulators can avoid
directly checking sim_idle_enab before calling sim_idle so that all of
the bookkeeping on sim_idle_idled is done here in sim_timer where it
means something, while not idling when it isn't enabled.
*/
//sim_idle_idled = TRUE; /* record idle attempt */
sim_debug (DBG_TRC, &sim_timer_dev, "sim_idle(tmr=%d, sin_cyc=%d)\n", tmr, sin_cyc);
if (cyc_ms == 0) /* not computed yet? */
cyc_ms = (rtc_currd[tmr] * rtc_hz[tmr]) / 1000; /* cycles per msec */
if ((sim_idle_rate_ms == 0) || (cyc_ms == 0)) { /* not possible? */
if (sin_cyc)
sim_interval = sim_interval - 1;
sim_debug (DBG_IDL, &sim_timer_dev, "not possible %d - %d\n", sim_idle_rate_ms, cyc_ms);
return FALSE;
}
w_ms = (uint32) sim_interval / cyc_ms; /* ms to wait */
w_idle = w_ms / sim_idle_rate_ms; /* intervals to wait */
if (w_idle == 0) { /* none? */
if (sin_cyc)
sim_interval = sim_interval - 1;
sim_debug (DBG_IDL, &sim_timer_dev, "no wait\n");
return FALSE;
}
if (sim_clock_queue == QUEUE_LIST_END)
sim_debug (DBG_IDL, &sim_timer_dev, "sleeping for %d ms - pending event in %d instructions\n", w_ms, sim_interval);
else
sim_debug (DBG_IDL, &sim_timer_dev, "sleeping for %d ms - pending event on %s in %d instructions\n", w_ms, sim_uname(sim_clock_queue), sim_interval);
act_ms = SIM_IDLE_MS_SLEEP (w_ms); /* wait */
act_cyc = act_ms * cyc_ms;
if (act_ms < w_ms) /* awakened early? */
act_cyc += (cyc_ms * sim_idle_rate_ms) / 2; /* account for half an interval's worth of cycles */
if (sim_interval > act_cyc)
sim_interval = sim_interval - act_cyc; /* count down sim_interval */
else sim_interval = 0; /* or fire immediately */
if (sim_clock_queue == QUEUE_LIST_END)
sim_debug (DBG_IDL, &sim_timer_dev, "slept for %d ms - pending event in %d instructions\n", act_ms, sim_interval);
else
sim_debug (DBG_IDL, &sim_timer_dev, "slept for %d ms - pending event on %s in %d instructions\n", act_ms, sim_uname(sim_clock_queue), sim_interval);
return TRUE;
}
/* Set idling - implicitly disables throttling */
t_stat sim_set_idle (UNIT *uptr, int32 val, CONST char *cptr, void *desc)
{
t_stat r;
uint32 v;
if (sim_idle_rate_ms == 0)
return sim_messagef (SCPE_NOFNC, "Idling is not available, Minimum OS sleep time is %dms\n", sim_os_sleep_min_ms);
if ((val != 0) && (sim_idle_rate_ms > (uint32) val))
return sim_messagef (SCPE_NOFNC, "Idling is not available, Minimum OS sleep time is %dms, Requied minimum OS sleep is %dms\n", sim_os_sleep_min_ms, val);
if (cptr && *cptr) {
v = (uint32) get_uint (cptr, 10, SIM_IDLE_STMAX, &r);
if ((r != SCPE_OK) || (v < SIM_IDLE_STMIN))
return sim_messagef (SCPE_ARG, "Invalid Stability value: %s. Valid values range from %d to %d.\n", cptr, SIM_IDLE_STMIN, SIM_IDLE_STMAX);
sim_idle_stable = v;
}
sim_idle_enab = TRUE;
if (sim_throt_type != SIM_THROT_NONE) {
sim_set_throt (0, NULL);
sim_printf ("Throttling disabled\n");
}
return SCPE_OK;
}
/* Clear idling */
t_stat sim_clr_idle (UNIT *uptr, int32 val, CONST char *cptr, void *desc)
{
sim_idle_enab = FALSE;
return SCPE_OK;
}
/* Show idling */
t_stat sim_show_idle (FILE *st, UNIT *uptr, int32 val, CONST void *desc)
{
if (sim_idle_enab)
fprintf (st, "idle enabled");
else
fprintf (st, "idle disabled");
if (sim_switches & SWMASK ('D'))
fprintf (st, ", stability wait = %ds, minimum sleep resolution = %dms", sim_idle_stable, sim_os_sleep_min_ms);
return SCPE_OK;
}
/* Throttling package */
t_stat sim_set_throt (int32 arg, CONST char *cptr)
{
CONST char *tptr;
char c;
t_value val, val2 = 0;
if (arg == 0) {
if ((cptr != NULL) && (*cptr != 0))
return sim_messagef (SCPE_ARG, "Unexpected NOTHROTTLE argument: %s\n", cptr);
sim_throt_type = SIM_THROT_NONE;
sim_throt_cancel ();
}
else if (sim_idle_rate_ms == 0) {
return sim_messagef (SCPE_NOFNC, "Throttling is not available, Minimum OS sleep time is %dms\n", sim_os_sleep_min_ms);
}
else {
if (*cptr == '\0')
return sim_messagef (SCPE_ARG, "Missing throttle mode specification\n");
val = strtotv (cptr, &tptr, 10);
if (cptr == tptr)
return sim_messagef (SCPE_ARG, "Invalid throttle specification: %s\n", cptr);
sim_throt_sleep_time = sim_idle_rate_ms;
c = (char)toupper (*tptr++);
if (c == '/') {
val2 = strtotv (tptr, &tptr, 10);
if ((*tptr != '\0') || (val == 0))
return sim_messagef (SCPE_ARG, "Invalid throttle delay specifier: %s\n", cptr);
}
if (c == 'M')
sim_throt_type = SIM_THROT_MCYC;
else if (c == 'K')
sim_throt_type = SIM_THROT_KCYC;
else if ((c == '%') && (val > 0) && (val < 100))
sim_throt_type = SIM_THROT_PCT;
else if ((c == '/') && (val2 != 0))
sim_throt_type = SIM_THROT_SPC;
else return sim_messagef (SCPE_ARG, "Invalid throttle specification: %s\n", cptr);
if (sim_idle_enab) {
sim_printf ("Idling disabled\n");
sim_clr_idle (NULL, 0, NULL, NULL);
}
sim_throt_val = (uint32) val;
if (sim_throt_type == SIM_THROT_SPC) {
if (val2 >= sim_idle_rate_ms)
sim_throt_sleep_time = (uint32) val2;
else {
if ((sim_idle_rate_ms % val2) == 0) {
sim_throt_sleep_time = sim_idle_rate_ms;
sim_throt_val = (uint32) (val * (sim_idle_rate_ms / val2));
}
else {
sim_throt_sleep_time = sim_idle_rate_ms;
sim_throt_val = (uint32) (val * (1 + (sim_idle_rate_ms / val2)));
}
}
}
}
return SCPE_OK;
}
t_stat sim_show_throt (FILE *st, DEVICE *dnotused, UNIT *unotused, int32 flag, CONST char *cptr)
{
if (sim_idle_rate_ms == 0)
fprintf (st, "Throttling not available\n");
else {
switch (sim_throt_type) {
case SIM_THROT_MCYC:
fprintf (st, "Throttle = %d megacycles\n", sim_throt_val);
if (sim_throt_wait)
fprintf (st, "Throttling achieved by sleeping for %d ms every %d cycles\n", sim_throt_sleep_time, sim_throt_wait);
break;
case SIM_THROT_KCYC:
fprintf (st, "Throttle = %d kilocycles\n", sim_throt_val);
if (sim_throt_wait)
fprintf (st, "Throttling achieved by sleeping for %d ms every %d cycles\n", sim_throt_sleep_time, sim_throt_wait);
break;
case SIM_THROT_PCT:
fprintf (st, "Throttle = %d%%\n", sim_throt_val);
if (sim_throt_wait)
fprintf (st, "Throttling achieved by sleeping for %d ms every %d cycles\n", sim_throt_sleep_time, sim_throt_wait);
break;
case SIM_THROT_SPC:
fprintf (st, "Throttle = %d ms every %d cycles\n", sim_throt_sleep_time, sim_throt_val);
break;
default:
fprintf (st, "Throttling disabled\n");
break;
}
}
return SCPE_OK;
}
void sim_throt_sched (void)
{
sim_throt_state = 0;
if (sim_throt_type)
sim_activate (&sim_timer_units[SIM_NTIMERS], SIM_THROT_WINIT);
}
void sim_throt_cancel (void)
{
sim_cancel (&sim_timer_units[SIM_NTIMERS]);
}
/* Throttle service
Throttle service has three distinct states used while dynamically
determining a throttling interval:
0 take initial measurement
1 take final measurement, calculate wait values
2 periodic waits to slow down the CPU
*/
t_stat sim_throt_svc (UNIT *uptr)
{
uint32 delta_ms;
double a_cps, d_cps;
if (sim_throt_type == SIM_THROT_SPC) { /* Non dynamic? */
sim_throt_state = 2; /* force state */
sim_throt_wait = sim_throt_val;
}
switch (sim_throt_state) {
case 0: /* take initial reading */
sim_throt_ms_start = sim_os_msec ();
sim_throt_inst_start = sim_gtime();
sim_throt_wait = SIM_THROT_WST;
sim_throt_state = 1; /* next state */
break; /* reschedule */
case 1: /* take final reading */
sim_throt_ms_stop = sim_os_msec ();
delta_ms = sim_throt_ms_stop - sim_throt_ms_start;
if (delta_ms < SIM_THROT_MSMIN) { /* not enough time? */
if (sim_throt_wait >= 100000000) { /* too many inst? */
sim_throt_state = 0; /* fails in 32b! */
return SCPE_OK;
}
sim_throt_wait = sim_throt_wait * SIM_THROT_WMUL;
sim_throt_ms_start = sim_throt_ms_stop;
sim_throt_inst_start = sim_gtime();
}
else { /* long enough */
a_cps = ((double) sim_throt_wait) * 1000.0 / (double) delta_ms;
if (sim_throt_type == SIM_THROT_MCYC) /* calc desired cps */
d_cps = (double) sim_throt_val * 1000000.0;
else if (sim_throt_type == SIM_THROT_KCYC)
d_cps = (double) sim_throt_val * 1000.0;
else d_cps = (a_cps * ((double) sim_throt_val)) / 100.0;
if (d_cps >= a_cps) {
sim_throt_sched (); /* start over */
return SCPE_OK;
}
sim_throt_wait = (int32) /* time between waits */
((a_cps * d_cps * ((double) sim_idle_rate_ms)) /
(1000.0 * (a_cps - d_cps)));
if (sim_throt_wait < SIM_THROT_WMIN) { /* not long enough? */
sim_throt_sched (); /* start over */
return SCPE_OK;
}
sim_throt_ms_start = sim_throt_ms_stop;
sim_throt_inst_start = sim_gtime();
sim_throt_state = 2;
sim_debug (DBG_THR, &sim_timer_dev, "sim_throt_svc() Throttle values a_cps = %f, d_cps = %f, wait = %d\n",
a_cps, d_cps, sim_throt_wait);
sim_throt_cps = (int32)d_cps; /* save the desired rate */
}
break;
case 2: /* throttling */
SIM_IDLE_MS_SLEEP (sim_throt_sleep_time);
delta_ms = sim_os_msec () - sim_throt_ms_start;
if (sim_throt_type != SIM_THROT_SPC) { /* when not dynamic throttling */
if (delta_ms >= 10000) { /* recompute every 10 sec */
double delta_insts = sim_gtime() - sim_throt_inst_start;
a_cps = (delta_insts * 1000.0) / (double) delta_ms;
if (sim_throt_type == SIM_THROT_MCYC) /* calc desired cps */
d_cps = (double) sim_throt_val * 1000000.0;
else if (sim_throt_type == SIM_THROT_KCYC)
d_cps = (double) sim_throt_val * 1000.0;
else d_cps = (a_cps * ((double) sim_throt_val)) / 100.0;
if (fabs(100.0 * (d_cps - a_cps) / a_cps) > (double)SIM_THROT_DRIFT_PCT) {
sim_throt_wait = sim_throt_val;
sim_throt_state = 1; /* next state to recalibrate */
sim_debug (DBG_THR, &sim_timer_dev, "sim_throt_svc() Recalibrating throttle based on values a_cps = %f, d_cps = %f\n",
a_cps, d_cps);
}
sim_throt_ms_start = sim_os_msec ();
sim_throt_inst_start = sim_gtime();
}
}
else /* record instruction rate */
sim_throt_cps = (int32)((1000.0 * sim_throt_val) / (double)delta_ms);
break;
}
sim_activate (uptr, sim_throt_wait); /* reschedule */
return SCPE_OK;
}
t_stat sim_timer_tick_svc (UNIT *uptr)
{
return SCPE_OK;
}
#if defined(SIM_ASYNCH_IO) && defined(SIM_ASYNCH_CLOCKS)
static double _timespec_to_double (struct timespec *time)
{
return ((double)time->tv_sec)+(double)(time->tv_nsec)/1000000000.0;
}
static void _double_to_timespec (struct timespec *time, double dtime)
{
time->tv_sec = (time_t)floor(dtime);
time->tv_nsec = (long)((dtime-floor(dtime))*1000000000.0);
}
double sim_timenow_double (void)
{
struct timespec now;
clock_gettime(CLOCK_REALTIME, &now);
return _timespec_to_double (&now);
}
extern UNIT * volatile sim_wallclock_queue;
extern UNIT * volatile sim_wallclock_entry;
pthread_t sim_timer_thread; /* Wall Clock Timing Thread Id */
pthread_cond_t sim_timer_startup_cond;
t_bool sim_timer_thread_running = FALSE;
t_bool sim_timer_event_canceled = FALSE;
static void *
_timer_thread(void *arg)
{
int sched_policy;
struct sched_param sched_priority;
/* Boost Priority for this I/O thread vs the CPU instruction execution
thread which, in general, won't be readily yielding the processor when
this thread needs to run */
pthread_getschedparam (pthread_self(), &sched_policy, &sched_priority);
++sched_priority.sched_priority;
pthread_setschedparam (pthread_self(), sched_policy, &sched_priority);
sim_debug (DBG_TIM, &sim_timer_dev, "_timer_thread() - starting\n");
pthread_mutex_lock (&sim_timer_lock);
pthread_cond_signal (&sim_timer_startup_cond); /* Signal we're ready to go */
while (sim_asynch_enabled && sim_asynch_timer && sim_is_running) {
struct timespec start_time, stop_time;
struct timespec due_time;
double wait_usec;
int32 inst_delay;
double inst_per_sec;
UNIT *uptr;
if (sim_wallclock_entry) { /* something to insert in queue? */
UNIT *cptr, *prvptr;
sim_debug (DBG_TIM, &sim_timer_dev, "_timer_thread() - timing %s for %d usec\n",
sim_uname(sim_wallclock_entry), sim_wallclock_entry->time);
uptr = sim_wallclock_entry;
sim_wallclock_entry = NULL;
prvptr = NULL;
for (cptr = sim_wallclock_queue; cptr != QUEUE_LIST_END; cptr = cptr->a_next) {
if (uptr->a_due_time < cptr->a_due_time)
break;
prvptr = cptr;
}
if (prvptr == NULL) { /* insert at head */
cptr = uptr->a_next = sim_wallclock_queue;
sim_wallclock_queue = uptr;
}
else {
cptr = uptr->a_next = prvptr->a_next; /* insert at prvptr */
prvptr->a_next = uptr;
}
}
/* determine wait time */
if (sim_wallclock_queue != QUEUE_LIST_END) {
/* due time adjusted by 1/2 a minimal sleep interval */
/* the goal being to let the last fractional part of the due time */
/* be done by counting instructions */
_double_to_timespec (&due_time, sim_wallclock_queue->a_due_time-(((double)sim_idle_rate_ms)*0.0005));
}
else {
due_time.tv_sec = 0x7FFFFFFF; /* Sometime when 32 bit time_t wraps */
due_time.tv_nsec = 0;
}
clock_gettime(CLOCK_REALTIME, &start_time);
wait_usec = floor(1000000.0*(_timespec_to_double (&due_time) - _timespec_to_double (&start_time)));
if (sim_wallclock_queue == QUEUE_LIST_END)
sim_debug (DBG_TIM, &sim_timer_dev, "_timer_thread() - waiting forever\n");
else
sim_debug (DBG_TIM, &sim_timer_dev, "_timer_thread() - waiting for %.0f usecs until %.6f for %s\n", wait_usec, sim_wallclock_queue->a_due_time, sim_uname(sim_wallclock_queue));
if ((wait_usec <= 0.0) ||
(0 != pthread_cond_timedwait (&sim_timer_wake, &sim_timer_lock, &due_time))) {
int tmr;
if (sim_wallclock_queue == QUEUE_LIST_END) /* queue empty? */
continue; /* wait again */
inst_per_sec = sim_timer_inst_per_sec ();
uptr = sim_wallclock_queue;
sim_wallclock_queue = uptr->a_next;
uptr->a_next = NULL; /* hygiene */
clock_gettime(CLOCK_REALTIME, &stop_time);
if (1 != sim_timespec_compare (&due_time, &stop_time)) {
inst_delay = 0;
uptr->a_last_fired_time = _timespec_to_double(&stop_time);
}
else {
inst_delay = (int32)(inst_per_sec*(_timespec_to_double(&due_time)-_timespec_to_double(&stop_time)));
uptr->a_last_fired_time = uptr->a_due_time;
}
sim_debug (DBG_TIM, &sim_timer_dev, "_timer_thread() - slept %.0fms - activating(%s,%d)\n",
1000.0*(_timespec_to_double (&stop_time)-_timespec_to_double (&start_time)), sim_uname(uptr), inst_delay);
for (tmr=0; tmr<SIM_NTIMERS; tmr++)
if (sim_clock_unit[tmr] == uptr)
break;
if (tmr != SIM_NTIMERS) {
/*
* Some devices may depend on executing during the same instruction or immediately
* after the clock tick event. To satisfy this, we link the clock unit to the head
* of the clock coschedule queue and then insert that list in the asynch event
* queue in a single operation
*/
uptr->a_next = sim_clock_cosched_queue[tmr];
sim_clock_cosched_queue[tmr] = QUEUE_LIST_END;
AIO_ACTIVATE_LIST(sim_activate, uptr, inst_delay);
}
else
sim_activate (uptr, inst_delay);
}
else {/* Something wants to adjust the queue since the wait condition was signaled */
if (sim_timer_event_canceled)
sim_timer_event_canceled = FALSE; /* reset flag and continue */
}
}
pthread_mutex_unlock (&sim_timer_lock);
sim_debug (DBG_TIM, &sim_timer_dev, "_timer_thread() - exiting\n");
return NULL;
}
#endif /* defined(SIM_ASYNCH_IO) && defined(SIM_ASYNCH_CLOCKS) */
/*
In the event that there are no active clock devices, no instruction
rate calibration will be performed. This is more likely on simpler
simulators which don't have a full spectrum of standard devices or
possibly when a clock device exists but its use is optional.
To solve this we merely run an internal clock at 50Hz.
*/
#define CLK_TPS 50
#define CLK_INIT 20000
static t_stat sim_timer_clock_tick_svc (UNIT *uptr)
{
sim_rtcn_calb (CLK_TPS, SIM_NTIMERS-1);
sim_activate_after (uptr, 1000000/CLK_TPS); /* reactivate unit */
return SCPE_OK;
}
static t_stat sim_timer_clock_reset (DEVICE *dptr)
{
uint32 i;
sim_debug (DBG_TRC, &sim_timer_dev, "sim_timer_clock_reset()\n");
for (i = 0; i < SIM_NTIMERS; i++)
if (rtc_initd[i] != 0)
break;
if (i == SIM_NTIMERS) { /* No clocks have signed in. */
/* setup internal clock */
sim_timer_units[SIM_NTIMERS+1].action = &sim_timer_clock_tick_svc;
sim_timer_units[SIM_NTIMERS+1].flags = UNIT_DIS | UNIT_IDLE;
}
if (sim_timer_units[SIM_NTIMERS+1].action == &sim_timer_clock_tick_svc) {
/* actual clock reset */
sim_rtcn_init_unit (&sim_timer_units[SIM_NTIMERS+1], CLK_INIT, SIM_NTIMERS-1);
sim_activate_abs (&sim_timer_units[SIM_NTIMERS+1], CLK_INIT);
}
return SCPE_OK;
}
void sim_start_timer_services (void)
{
uint32 i;
sim_debug (DBG_TRC, &sim_timer_dev, "sim_start_timer_services()\n");
for (i = 0; i < SIM_NTIMERS; i++)
if (rtc_initd[i] != 0)
break;
if (i == SIM_NTIMERS) { /* No clocks have signed in. */
/* setup internal clock */
sim_timer_units[SIM_NTIMERS+1].action = &sim_timer_clock_tick_svc;
sim_rtcn_init_unit (&sim_timer_units[SIM_NTIMERS+1], CLK_INIT, SIM_NTIMERS-1);
sim_activate_abs (&sim_timer_units[SIM_NTIMERS+1], CLK_INIT);
}
#if defined(SIM_ASYNCH_IO) && defined(SIM_ASYNCH_CLOCKS)
pthread_mutex_lock (&sim_timer_lock);
if (sim_asynch_enabled && sim_asynch_timer) {
pthread_attr_t attr;
UNIT *cptr;
double delta_due_time = 0;
/* when restarting after being manually stopped the due times for all */
/* timer events needs to slide so they fire in the future. (clock ticks */
/* don't accumulate when the simulator is stopped) */
for (cptr = sim_wallclock_queue; cptr != QUEUE_LIST_END; cptr = cptr->a_next) {
if (cptr == sim_wallclock_queue) { /* Handle first entry */
struct timespec now;
double due_time;
clock_gettime(CLOCK_REALTIME, &now);
due_time = _timespec_to_double(&now) + ((double)(cptr->a_usec_delay)/1000000.0);
delta_due_time = due_time - cptr->a_due_time;
}
cptr->a_due_time += delta_due_time;
}
sim_debug (DBG_TRC, &sim_timer_dev, "sim_start_timer_services() - starting\n");
pthread_cond_init (&sim_timer_startup_cond, NULL);
pthread_attr_init (&attr);
pthread_attr_setscope (&attr, PTHREAD_SCOPE_SYSTEM);
pthread_create (&sim_timer_thread, &attr, _timer_thread, NULL);
pthread_attr_destroy( &attr);
pthread_cond_wait (&sim_timer_startup_cond, &sim_timer_lock); /* Wait for thread to stabilize */
pthread_cond_destroy (&sim_timer_startup_cond);
sim_timer_thread_running = TRUE;
}
pthread_mutex_unlock (&sim_timer_lock);
#endif
}
void sim_stop_timer_services (void)
{
sim_debug (DBG_TRC, &sim_timer_dev, "sim_stop_timer_services()\n");
#if defined(SIM_ASYNCH_IO) && defined(SIM_ASYNCH_CLOCKS)
pthread_mutex_lock (&sim_timer_lock);
if (sim_timer_thread_running) {
sim_debug (DBG_TRC, &sim_timer_dev, "sim_stop_timer_services() - stopping\n");
pthread_cond_signal (&sim_timer_wake);
pthread_mutex_unlock (&sim_timer_lock);
pthread_join (sim_timer_thread, NULL);
sim_timer_thread_running = FALSE;
}
else
pthread_mutex_unlock (&sim_timer_lock);
#endif
}
t_stat sim_timer_change_asynch (void)
{
#if defined(SIM_ASYNCH_IO) && defined(SIM_ASYNCH_CLOCKS)
if (sim_asynch_enabled && sim_asynch_timer)
sim_start_timer_services ();
else {
UNIT *uptr;
uint32 accum = 0;
sim_stop_timer_services ();
while (1) {
uptr = sim_wallclock_queue;
if (uptr == QUEUE_LIST_END)
break;
sim_wallclock_queue = uptr->a_next;
accum += uptr->time;
uptr->a_next = NULL;
uptr->a_due_time = 0;
uptr->a_usec_delay = 0;
sim_activate_after (uptr, accum);
}
}
#endif
return SCPE_OK;
}
/* Instruction Execution rate. */
/* returns a double since it is mostly used in double expressions and
to avoid overflow if/when strange timing delays might produce unexpected results */
double sim_timer_inst_per_sec (void)
{
double inst_per_sec = SIM_INITIAL_IPS;
if (sim_calb_tmr == -1)
return inst_per_sec;
inst_per_sec = ((double)rtc_currd[sim_calb_tmr])*rtc_hz[sim_calb_tmr];
if (0 == inst_per_sec)
inst_per_sec = SIM_INITIAL_IPS;
return inst_per_sec;
}
t_stat sim_timer_activate_after (UNIT *uptr, uint32 usec_delay)
{
int inst_delay;
double inst_delay_d, inst_per_sec;
AIO_VALIDATE;
if (sim_is_active (uptr)) /* already active? */
return SCPE_OK;
inst_per_sec = sim_timer_inst_per_sec ();
inst_delay_d = ((inst_per_sec*usec_delay)/1000000.0);
/* Bound delay to avoid overflow. */
/* Long delays are usually canceled before they expire */
if (inst_delay_d > (double)0x7fffffff)
inst_delay_d = (double)0x7fffffff;
inst_delay = (int32)inst_delay_d;
if ((inst_delay == 0) && (usec_delay != 0))
inst_delay = 1; /* Minimum non-zero delay is 1 instruction */
#if defined(SIM_ASYNCH_IO) && defined(SIM_ASYNCH_CLOCKS)
if ((sim_calb_tmr == -1) || /* if No timer initialized */
(inst_delay < rtc_currd[sim_calb_tmr]) || /* or sooner than next clock tick? */
(rtc_elapsed[sim_calb_tmr] < sim_idle_stable) || /* or not idle stable yet */
(!(sim_asynch_enabled && sim_asynch_timer))) { /* or asynch disabled */
sim_debug (DBG_TIM, &sim_timer_dev, "sim_timer_activate_after() - activating %s after %d instructions\n",
sim_uname(uptr), inst_delay);
return _sim_activate (uptr, inst_delay); /* queue it now */
}
if (1) {
struct timespec now;
double d_now;
clock_gettime (CLOCK_REALTIME, &now);
d_now = _timespec_to_double (&now);
/* Determine if this is a clock tick like invocation
or an ocaisional measured device delay */
if ((uptr->a_usec_delay == usec_delay) &&
(uptr->a_due_time != 0.0) &&
(1)) {
double d_delay = ((double)usec_delay)/1000000.0;
uptr->a_due_time += d_delay;
if (uptr->a_due_time < (d_now + d_delay*0.1)) { /* Accumulate lost time */
uptr->a_skew += (d_now + d_delay*0.1) - uptr->a_due_time;
uptr->a_due_time = d_now + d_delay/10.0;
if (uptr->a_skew > 30.0) { /* Gap too big? */
uptr->a_usec_delay = usec_delay;
uptr->a_skew = uptr->a_last_fired_time = 0.0;
uptr->a_due_time = d_now + (double)(usec_delay)/1000000.0;
}
if (uptr->a_skew > rtc_clock_skew_max[sim_calb_tmr])
rtc_clock_skew_max[sim_calb_tmr] = uptr->a_skew;
}
else {
if (uptr->a_skew > 0.0) { /* Lost time to make up? */
if (uptr->a_skew > d_delay*0.9) {
uptr->a_skew -= d_delay*0.9;
uptr->a_due_time -= d_delay*0.9;
}
else {
uptr->a_due_time -= uptr->a_skew;
uptr->a_skew = 0.0;
}
}
}
}
else {
uptr->a_usec_delay = usec_delay;
uptr->a_skew = uptr->a_last_fired_time = 0.0;
uptr->a_due_time = d_now + (double)(usec_delay)/1000000.0;
}
uptr->time = usec_delay;
sim_debug (DBG_TIM, &sim_timer_dev, "sim_timer_activate_after() - queue addition %s at %.6f\n",
sim_uname(uptr), uptr->a_due_time);
}
pthread_mutex_lock (&sim_timer_lock);
while (sim_wallclock_entry) {
sim_debug (DBG_TIM, &sim_timer_dev, "sim_timer_activate_after() - queue insert entry %s busy waiting for 1ms\n",
sim_uname(sim_wallclock_entry));
pthread_mutex_unlock (&sim_timer_lock);
sim_os_ms_sleep (1);
pthread_mutex_lock (&sim_timer_lock);
}
sim_wallclock_entry = uptr;
pthread_mutex_unlock (&sim_timer_lock);
pthread_cond_signal (&sim_timer_wake); /* wake the timer thread to deal with it */
return SCPE_OK;
#else
sim_debug (DBG_TIM, &sim_timer_dev, "sim_timer_activate_after() - queue addition %s at %d (%d usecs)\n",
sim_uname(uptr), inst_delay, usec_delay);
return _sim_activate (uptr, inst_delay); /* queue it now */
#endif
}
/* Clock coscheduling routines */
t_stat sim_register_clock_unit_tmr (UNIT *uptr, int32 tmr)
{
if (NULL == sim_clock_unit[tmr])
sim_clock_cosched_queue[tmr] = QUEUE_LIST_END;
sim_clock_unit[tmr] = uptr;
return SCPE_OK;
}
t_stat sim_register_clock_unit (UNIT *uptr)
{
return sim_register_clock_unit_tmr (uptr, 0);
}
t_stat sim_clock_coschedule (UNIT *uptr, int32 interval)
{
return sim_clock_coschedule_tmr (uptr, sim_calb_tmr, interval);
}
t_stat sim_clock_coschedule_abs (UNIT *uptr, int32 interval)
{
sim_cancel (uptr);
return sim_clock_coschedule_tmr (uptr, sim_calb_tmr, interval);
}
t_stat sim_clock_coschedule_tmr (UNIT *uptr, int32 tmr, int32 interval)
{
if ((tmr < 0) || (tmr >= SIM_NTIMERS) ||
(NULL == sim_clock_unit[tmr]))
return sim_activate (uptr, interval);
else
if (sim_asynch_enabled && sim_asynch_timer) {
if (!sim_is_active (uptr)) { /* already active? */
#if defined(SIM_ASYNCH_IO) && defined(SIM_ASYNCH_CLOCKS)
if ((sim_calb_tmr != -1) &&
(rtc_elapsed[sim_calb_tmr ] >= sim_idle_stable)) {
sim_debug (DBG_TIM, &sim_timer_dev, "sim_clock_coschedule() - queueing %s for clock co-schedule\n", sim_uname (uptr));
pthread_mutex_lock (&sim_timer_lock);
uptr->a_next = sim_clock_cosched_queue[tmr];
sim_clock_cosched_queue[tmr] = uptr;
pthread_mutex_unlock (&sim_timer_lock);
return SCPE_OK;
}
else {
#else
if (1) {
#endif
int32 t;
t = sim_activate_time (sim_clock_unit[tmr]);
return sim_activate (uptr, t? t - 1: interval);
}
}
sim_debug (DBG_TIM, &sim_timer_dev, "sim_clock_coschedule() - %s is already active\n", sim_uname (uptr));
return SCPE_OK;
}
else {
int32 t;
t = sim_activate_time (sim_clock_unit[tmr]);
return sim_activate (uptr, t? t - 1: interval);
}
}
t_stat sim_clock_coschedule_tmr_abs (UNIT *uptr, int32 tmr, int32 interval)
{
sim_cancel (uptr);
return sim_clock_coschedule_tmr (uptr, tmr, interval);
}