| /* system_defs.h: Intel iSBC simulator definitions |
| |
| Copyright (c) 2010, William A. Beech |
| |
| Permission is hereby granted, free of charge, to any person obtaining a |
| copy of this software and associated documentation files (the "Software"), |
| to deal in the Software without restriction, including without limitation |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| and/or sell copies of the Software, and to permit persons to whom the |
| Software is furnished to do so, subject to the following conditions: |
| |
| The above copyright notice and this permission notice shall be included in |
| all copies or substantial portions of the Software. |
| |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| William A. Beech BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| |
| Except as contained in this notice, the name of William A. Beech shall not be |
| used in advertising or otherwise to promote the sale, use or other dealings |
| in this Software without prior written authorization from William A. Beech. |
| |
| ?? ??? 10 - Original file. |
| */ |
| |
| #include <stdio.h> |
| #include <ctype.h> |
| #include "sim_defs.h" /* simulator defns */ |
| |
| #define SET_XACK(VAL) (xack = VAL) |
| |
| //chip definitions for the iSBC-80/30 |
| /* set the base I/O address for the 8253/8254 */ |
| #define I8041_BASE 0xDC |
| #define I8041_NUM 1 |
| |
| /* set the base I/O address and device count for the 8251s */ |
| #define I8251_BASE 0xEC |
| #define I8251_NUM 1 |
| |
| /* set the base I/O address for the 8253/8254 */ |
| #define I8253_BASE 0xDC |
| #define I8253_NUM 1 |
| |
| /* set the base I/O address and device count for the 8255s */ |
| #define I8255_BASE 0xE8 |
| #define I8255_NUM 1 |
| |
| /* set the base I/O address for the 8259 */ |
| #define I8259_BASE 0xDA |
| #define I8259_NUM 1 |
| |
| /* set the base and size for the EPROM on the iSBC 80/30 */ |
| #define ROM_BASE 0x0000 |
| #define ROM_SIZE 0x1000 |
| #define ROM_DISABLE 1 |
| |
| /* set the base and size for the RAM on the iSBC 80/30 */ |
| #define RAM_BASE 0xF000 |
| #define RAM_SIZE 0x1000 |
| #define RAM_DISABLE 0 |
| |
| /* set INTR for CPU on the iSBC 80/30 */ |
| #define INTR INT_1 |
| |
| //board definitions for the multibus |
| /* set the base I/O address for the iSBC 201 */ |
| #define SBC201_BASE 0x78 |
| #define SBC201_INT INT_1 |
| #define SBC201_NUM 0 |
| |
| /* set the base I/O address for the iSBC 202 */ |
| #define SBC202_BASE 0x78 |
| #define SBC202_INT INT_1 |
| #define SBC202_NUM 1 |
| |
| /* set the base for the zx-200a disk controller */ |
| #define ZX200A_BASE_DD 0x78 |
| #define ZX200A_BASE_SD 0x88 |
| #define ZX200A_NUM 0 |
| |
| /* set the base I/O address for the iSBC 208 */ |
| #define SBC208_BASE 0x40 |
| #define SBC208_INT INT_1 |
| #define SBC208_NUM 0 |
| |
| /* set the base and size for the iSBC 064 */ |
| #define SBC064_BASE 0x0000 |
| #define SBC064_SIZE 0x10000 |
| #define SBC064_NUM 1 |
| |
| /* multibus interrupt definitions */ |
| |
| #define INT_0 0x01 |
| #define INT_1 0x02 |
| #define INT_2 0x04 |
| #define INT_3 0x08 |
| #define INT_4 0x10 |
| #define INT_5 0x20 |
| #define INT_6 0x40 |
| #define INT_7 0x80 |
| |
| /* CPU interrupts definitions */ |
| |
| #define INT_R 0x200 |
| #define I75 0x40 |
| #define I65 0x20 |
| #define I55 0x10 |
| |
| /* Memory */ |
| |
| #define MAXMEMSIZE 0x10000 /* 8080 max memory size */ |
| #define MEMSIZE (i8080_unit.capac) /* 8080 actual memory size */ |
| #define ADDRMASK (MAXMEMSIZE - 1) /* 8080 address mask */ |
| #define MEM_ADDR_OK(x) (((uint32) (x)) < MEMSIZE) |
| |
| /* debug definitions */ |
| |
| #define DEBUG_flow 0x0001 |
| #define DEBUG_read 0x0002 |
| #define DEBUG_write 0x0004 |
| #define DEBUG_level1 0x0008 |
| #define DEBUG_level2 0x0010 |
| #define DEBUG_reg 0x0020 |
| #define DEBUG_asm 0x0040 |
| #define DEBUG_xack 0x0080 |
| #define DEBUG_all 0xFFFF |
| |
| /* Simulator stop codes */ |
| |
| #define STOP_RSRV 1 /* must be 1 */ |
| #define STOP_HALT 2 /* HALT */ |
| #define STOP_IBKPT 3 /* breakpoint */ |
| #define STOP_OPCODE 4 /* Invalid Opcode */ |
| #define STOP_IO 5 /* I/O error */ |
| #define STOP_MEM 6 /* Memory error */ |
| #define STOP_XACK 7 /* XACK error */ |
| |