/* i7094_com.c: IBM 7094 7750 communications interface simulator | |
Copyright (c) 2005-2010, Robert M Supnik | |
Permission is hereby granted, free of charge, to any person obtaining a | |
copy of this software and associated documentation files (the "Software"), | |
to deal in the Software without restriction, including without limitation | |
the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
and/or sell copies of the Software, and to permit persons to whom the | |
Software is furnished to do so, subject to the following conditions: | |
The above copyright notice and this permission notice shall be included in | |
all copies or substantial portions of the Software. | |
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
Except as contained in this notice, the name of Robert M Supnik shall not be | |
used in advertising or otherwise to promote the sale, use or other dealings | |
in this Software without prior written authorization from Robert M Supnik. | |
com 7750 controller | |
coml 7750 lines | |
12-Aug-2010 RMS Major rewrite for CTSS (from Dave Pitts) | |
19-Nov-2008 RMS Revised for common TMXR show routines | |
This module implements an abstract simulator for the IBM 7750 communications | |
computer as used by the CTSS system. The 7750 supports up to 112 lines; | |
the simulator supports 33. The 7750 can handle both high-speed lines, in | |
6b and 12b mode, and normal terminals, in 12b mode only; the simulator | |
supports only terminals. The 7750 can handle many different kinds of | |
terminals; the simulator supports only a limited subset. | |
Input is asynchronous and line buffered. When valid input (a line or a | |
control message) is available, the 7750 sets ATN1 to signal availability of | |
input. When the 7094 issues a CTLRN, the 7750 gathers available input characters | |
into a message. The message has a 12b sequence number, followed by 12b line | |
number/character pairs, followed by end-of-medium (03777). Input characters | |
can either be control characters (bit 02000 set) or data characters. Data | |
characters are 1's complemented and are 8b wide: 7 data bits and 1 parity | |
bit (which may be 0). | |
Output is synchronous. When the 7094 issues a CTLWN, the 7750 interprets | |
the channel output as a message. The message has a 12b line number, followed | |
by a 12b character count, followed by characters, followed by end-of-medium. | |
If bit 02000 of the line number is set, the characters are 12b wide. If | |
bit 01000 is set, the message is a control message. 12b characters consist | |
of 7 data bits, 1 parity bit, and 1 start bit. Data characters are 1's | |
complemented. Data character 03777 is special and causes the 7750 to | |
repeat the previous bit for the number of bit times specified in the next | |
character. This is used to generate delays for positioning characters. | |
The 7750 supports flow control for output. To help the 7094 account for | |
usage of 7750 buffer memory, the 7750 sends 'character output completion' | |
messages for every 'n' characters output on a line, where n <= 31. | |
Note that the simulator console is mapped in as line n+1. | |
*/ | |
#include "i7094_defs.h" | |
#include "sim_sock.h" | |
#include "sim_tmxr.h" | |
#include <ctype.h> | |
#define COM_MLINES 31 /* mux lines */ | |
#define COM_TLINES (COM_MLINES + 1) /* total lines */ | |
#define COM_BUFSIZ 120 /* max chan transfer */ | |
#define COM_PKTSIZ 16384 /* character buffer */ | |
#define UNIT_V_2741 (TTUF_V_UF + 0) /* 2741 - ni */ | |
#define UNIT_V_K35 (TTUF_V_UF + 1) /* KSR-35 */ | |
#define UNIT_2741 (1 << UNIT_V_2741) | |
#define UNIT_K35 (1 << UNIT_V_K35) | |
#define CONN u3 /* line is connected */ | |
#define NEEDID u4 /* need to send ID */ | |
#define NOECHO u5 /* no echo */ | |
#define INPP u6 /* input pending */ | |
#define COM_INIT_POLL 8000 /* polling interval */ | |
#define COMC_WAIT 2 /* channel delay time */ | |
#define COML_WAIT 1000 /* char delay time */ | |
#define COM_LBASE 4 /* start of lines */ | |
/* Input threads */ | |
#define COM_PLU 0 /* multiplexor poll */ | |
#define COM_CIU 1 /* console input */ | |
#define COM_CHU 2 /* channel transfer */ | |
#define COM_SNS 3 /* sense transfer */ | |
/* Communications input */ | |
#define COMI_VALIDL 02000 /* valid line flag */ | |
#define COMI_PARITY 00200 /* parity bit */ | |
#define COMI_DIALUP 02001 /* dialup */ | |
#define COMI_ENDID 02002 /* end ID */ | |
#define COMI_INTR 02003 /* interrupt */ | |
#define COMI_QUIT 02004 /* quit */ | |
#define COMI_HANGUP 02005 /* hangup */ | |
#define COMI_EOM 03777 /* end of medium */ | |
#define COMI_COMP(x) ((uint16) (03000 + ((x) & COMI_CMAX))) | |
#define COMI_K35 1 /* KSR-35 ID */ | |
#define COMI_K37 7 /* KSR-37 ID */ | |
#define COMI_2741 8 /* 2741 ID */ | |
#define COMI_CMAX 31 /* max chars returned */ | |
#define COMI_BMAX 50 /* buffer max, words */ | |
#define COMI_12BMAX ((3 * COMI_BMAX) - 1) /* last 12b char */ | |
/* Communications output */ | |
#define COMO_LIN12B 0200000000000 /* line is 12b */ | |
#define COMO_LINCTL 0100000000000 /* control msg */ | |
#define COMO_GETLN(x) (((uint32) ((x) >> 24)) & 0777) | |
#define COMO_CTLRST 00000 /* control reset */ | |
#define COMO_BITRPT 03777 /* bit repeat */ | |
#define COMO_EOM12B 07777 /* end of medium */ | |
#define COMO_BMAX 94 /* buffer max, words */ | |
#define COMO_12BMAX ((3 * COMO_BMAX) - 1) | |
/* Status word (60b) */ | |
#define COMS_PCHK 004000000000000000000 /* prog check */ | |
#define COMS_DCHK 002000000000000000000 /* data check */ | |
#define COMS_EXCC 001000000000000000000 /* exc cond */ | |
#define COMS_MLNT 000040000000000000000 /* message length check */ | |
#define COMS_CHNH 000020000000000000000 /* channel hold */ | |
#define COMS_CHNQ 000010000000000000000 /* channel queue full */ | |
#define COMS_ITMO 000000100000000000000 /* interface timeout */ | |
#define COMS_DATR 000000004000000000000 /* data message ready */ | |
#define COMS_INBF 000000002000000000000 /* input buffer free */ | |
#define COMS_SVCR 000000001000000000000 /* service message ready */ | |
#define COMS_PALL 000000000000000000000 | |
#define COMS_DALL 000000000000000000000 | |
#define COMS_EALL 000000000000000000000 | |
#define COMS_DYN 000000007000000000000 | |
/* Report variables */ | |
#define COMR_FQ 1 /* free queue */ | |
#define COMR_IQ 2 /* input queue */ | |
#define COMR_OQ 4 /* output queue */ | |
/* List heads and entries */ | |
typedef struct { | |
uint16 head; | |
uint16 tail; | |
} LISTHD; | |
typedef struct { | |
uint16 next; | |
uint16 data; | |
} LISTENT; | |
/* The 7750 character buffer is maintained as linked lists. The lists are: | |
free free list | |
inpq[ln] input queue for line n | |
outq[ln] output queue for line ln | |
Links are done as subscripts in array com_pkt. This allows the list | |
headers and the queues themselves to be saved and restored. */ | |
uint32 com_ch = CH_E; /* saved channel */ | |
uint32 com_enab = 0; /* 7750 enabled */ | |
uint32 com_msgn = 0; /* next input msg num */ | |
uint32 com_sta = 0; /* 7750 state */ | |
uint32 com_stop = 0; /* channel stop */ | |
uint32 com_quit = 003; /* quit code */ | |
uint32 com_intr = 0; /* interrupt code */ | |
uint32 com_bptr = 0; /* buffer pointer */ | |
uint32 com_blim = 0; /* buffer count */ | |
uint32 com_tps = 50; /* polls/second */ | |
t_uint64 com_sns = 0; /* sense word */ | |
t_uint64 com_chob = 0; /* chan output buf */ | |
uint32 com_chob_v = 0; /* valid flag */ | |
t_uint64 com_buf[COM_BUFSIZ]; /* channel buffer */ | |
LISTHD com_free; /* free list */ | |
uint32 com_not_ret[COM_TLINES] = { 0 }; /* chars not returned */ | |
LISTHD com_inpq[COM_TLINES] = { 0 }; /* input queues */ | |
LISTHD com_outq[COM_TLINES] = { 0 }; /* output queues */ | |
LISTENT com_pkt[COM_PKTSIZ]; /* character packets */ | |
TMLN com_ldsc[COM_MLINES] = { 0 }; /* line descriptors */ | |
TMXR com_desc = { COM_MLINES, 0, 0, com_ldsc }; /* mux descriptor */ | |
/* Even parity truth table */ | |
static const uint8 com_epar[128] = { | |
0, 1, 1, 0, 1, 0, 0, 1, | |
1, 0, 0, 1, 0, 1, 1, 0, | |
1, 0, 0, 1, 0, 1, 1, 0, | |
0, 1, 1, 0, 1, 0, 0, 1, | |
1, 0, 0, 1, 0, 1, 1, 0, | |
0, 1, 1, 0, 1, 0, 0, 1, | |
0, 1, 1, 0, 1, 0, 0, 1, | |
1, 0, 0, 1, 0, 1, 1, 0, | |
1, 0, 0, 1, 0, 1, 1, 0, | |
0, 1, 1, 0, 1, 0, 0, 1, | |
0, 1, 1, 0, 1, 0, 0, 1, | |
1, 0, 0, 1, 0, 1, 1, 0, | |
0, 1, 1, 0, 1, 0, 0, 1, | |
1, 0, 0, 1, 0, 1, 1, 0, | |
1, 0, 0, 1, 0, 1, 1, 0, | |
0, 1, 1, 0, 1, 0, 0, 1 | |
}; | |
extern uint32 ch_req; | |
t_stat com_chsel (uint32 ch, uint32 sel, uint32 unit); | |
t_stat com_chwr (uint32 ch, t_uint64 val, uint32 flags); | |
t_stat comi_svc (UNIT *uptr); | |
t_stat comc_svc (UNIT *uptr); | |
t_stat como_svc (UNIT *uptr); | |
t_stat coms_svc (UNIT *uptr); | |
t_stat comti_svc (UNIT *uptr); | |
t_stat comto_svc (UNIT *uptr); | |
t_stat com_reset (DEVICE *dptr); | |
t_stat com_attach (UNIT *uptr, char *cptr); | |
t_stat com_detach (UNIT *uptr); | |
t_stat com_show_ctrl (FILE *st, UNIT *uptr, int32 val, void *desc); | |
t_stat com_show_freeq (FILE *st, UNIT *uptr, int32 val, void *desc); | |
t_stat com_show_allq (FILE *st, UNIT *uptr, int32 val, void *desc); | |
t_stat com_show_oneq (FILE *st, UNIT *uptr, int32 val, void *desc); | |
void com_reset_ln (uint32 i); | |
uint16 com_get_nexti (uint32 *ln); | |
uint16 com_gethd_free (LISTHD *lh); | |
uint16 com_gethd (LISTHD *lh); | |
uint16 com_gettl_free (LISTHD *lh); | |
uint16 com_gettl (LISTHD *lh); | |
t_bool com_new_puttl (LISTHD *lh, uint16 val); | |
void com_puttl (LISTHD *lh, uint16 ent); | |
t_bool com_test_inp (void); | |
void com_set_inpp (uint32 ln); | |
t_uint64 com_getob (uint32 ch); | |
t_bool com_qdone (uint32 ch); | |
void com_end (uint32 ch, uint32 fl, uint32 st); | |
t_stat com_send_id (uint32 ln); | |
uint32 com_gen_ccmp (uint32 ln); | |
t_bool com_queue_in (uint32 ln, uint32 ch); | |
uint32 com_queue_out (uint32 ln, uint32 *c1); | |
void com_set_sns (t_uint64 stat); | |
/* COM data structures | |
com_dev COM device descriptor | |
com_unit COM unit descriptor | |
com_reg COM register list | |
com_mod COM modifiers list | |
*/ | |
DIB com_dib = { &com_chsel, &com_chwr }; | |
UNIT com_unit[] = { | |
{ UDATA (&comi_svc, UNIT_ATTABLE, 0), COM_INIT_POLL }, | |
{ UDATA (&comti_svc, UNIT_DIS, 0), KBD_POLL_WAIT }, | |
{ UDATA (&comc_svc, UNIT_DIS, 0), COMC_WAIT }, | |
{ UDATA (&coms_svc, UNIT_DIS, 0), COMC_WAIT } | |
}; | |
UNIT coml_unit[] = { | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&como_svc, 0, 0), COML_WAIT }, | |
{ UDATA (&comto_svc, 0, 0), COML_WAIT }, | |
}; | |
REG com_reg[] = { | |
{ FLDATA (ENABLE, com_enab, 0) }, | |
{ ORDATA (STATE, com_sta, 6) }, | |
{ ORDATA (MSGNUM, com_msgn, 12) }, | |
{ ORDATA (SNS, com_sns, 60) }, | |
{ ORDATA (CHOB, com_chob, 36) }, | |
{ FLDATA (CHOBV, com_chob_v, 0) }, | |
{ FLDATA (STOP, com_stop, 0) }, | |
{ ORDATA (QUIT, com_quit, 7) }, | |
{ ORDATA (INTR, com_intr, 7) }, | |
{ BRDATA (BUF, com_buf, 8, 36, COM_BUFSIZ) }, | |
{ DRDATA (BPTR, com_bptr, 7), REG_RO }, | |
{ DRDATA (BLIM, com_blim, 7), REG_RO }, | |
{ BRDATA (NRET, com_not_ret, 10, 32, COM_TLINES), REG_RO + PV_LEFT }, | |
{ URDATA (NEEDID, coml_unit[0].NEEDID, 8, 1, 0, COM_TLINES, 0) }, | |
{ URDATA (NOECHO, coml_unit[0].NOECHO, 8, 1, 0, COM_TLINES, 0) }, | |
{ URDATA (INPP, coml_unit[0].INPP, 8, 1, 0, COM_TLINES, 0) }, | |
{ BRDATA (FREEQ, &com_free, 10, 16, 2) }, | |
{ BRDATA (INPQ, com_inpq, 10, 16, 2 * COM_TLINES) }, | |
{ BRDATA (OUTQ, com_outq, 10, 16, 2 * COM_TLINES) }, | |
{ BRDATA (PKTB, com_pkt, 10, 16, 2 * COM_PKTSIZ) }, | |
{ DRDATA (TTIME, com_unit[COM_CIU].wait, 24), REG_NZ + PV_LEFT }, | |
{ DRDATA (WTIME, com_unit[COM_CHU].wait, 24), REG_NZ + PV_LEFT }, | |
{ DRDATA (CHAN, com_ch, 3), REG_HRO }, | |
{ NULL } | |
}; | |
MTAB com_mod[] = { | |
{ UNIT_ATT, UNIT_ATT, "summary", NULL, | |
NULL, &tmxr_show_summ, (void *) &com_desc }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, 1, "CONNECTIONS", NULL, | |
NULL, &tmxr_show_cstat, (void *) &com_desc }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, 0, "STATISTICS", NULL, | |
NULL, &tmxr_show_cstat, (void *) &com_desc }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, COMR_FQ, "FREEQ", NULL, | |
NULL, &com_show_ctrl, 0 }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, COMR_IQ, "INPQ", NULL, | |
NULL, &com_show_ctrl, 0 }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, COMR_OQ, "OUTQ", NULL, | |
NULL, &com_show_ctrl, 0 }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, -1, "ALL", NULL, | |
NULL, &com_show_ctrl, 0 }, | |
{ 0 } | |
}; | |
DEVICE com_dev = { | |
"COM", com_unit, com_reg, com_mod, | |
3, 10, 31, 1, 16, 8, | |
&tmxr_ex, &tmxr_dep, &com_reset, | |
NULL, &com_attach, &com_detach, | |
&com_dib, DEV_NET | DEV_DIS | |
}; | |
/* COML data structures | |
coml_dev COML device descriptor | |
coml_unit COML unit descriptor | |
coml_reg COML register list | |
coml_mod COML modifiers list | |
*/ | |
MTAB coml_mod[] = { | |
{ UNIT_K35+UNIT_2741, 0 , "KSR-37", "KSR-37", NULL }, | |
{ UNIT_K35+UNIT_2741, UNIT_K35 , "KSR-35", "KSR-35", NULL }, | |
// { UNIT_K35+UNIT_2741, UNIT_2741, "2741", "2741", NULL }, | |
{ MTAB_XTD|MTAB_VUN, 0, NULL, "DISCONNECT", | |
&tmxr_dscln, NULL, (void *) &com_desc }, | |
{ MTAB_XTD|MTAB_VUN|MTAB_NC, 0, "LOG", "LOG", | |
&tmxr_set_log, &tmxr_show_log, (void*) &com_desc }, | |
{ MTAB_XTD|MTAB_VUN|MTAB_NC, 0, NULL, "NOLOG", | |
&tmxr_set_nolog, NULL, (void *) &com_desc }, | |
{ MTAB_XTD | MTAB_VUN | MTAB_NMO, 0, "INPQ", NULL, | |
NULL, &com_show_oneq, 0 }, | |
{ MTAB_XTD | MTAB_VUN | MTAB_NMO, 1, "OUTQ", NULL, | |
NULL, &com_show_oneq, 0 }, | |
{ 0 } | |
}; | |
REG coml_reg[] = { | |
{ URDATA (TIME, coml_unit[0].wait, 10, 24, 0, | |
COM_TLINES, REG_NZ + PV_LEFT) }, | |
{ NULL } | |
}; | |
DEVICE coml_dev = { | |
"COML", coml_unit, coml_reg, coml_mod, | |
COM_TLINES, 10, 31, 1, 16, 8, | |
NULL, NULL, &com_reset, | |
NULL, NULL, NULL, | |
NULL, DEV_DIS | |
}; | |
/* COM: channel select */ | |
t_stat com_chsel (uint32 ch, uint32 sel, uint32 unit) | |
{ | |
com_ch = ch; /* save channel */ | |
if (sim_is_active (&com_unit[COM_CHU]) || /* not idle? */ | |
sim_is_active (&com_unit[COM_SNS])) { | |
com_end (ch, CHINT_SEQC, 0); /* end, seq check */ | |
return SCPE_OK; | |
} | |
switch (sel) { /* case on select */ | |
case CHSL_RDS: /* read */ | |
case CHSL_WRS: /* write */ | |
com_sns = 0; /* clear status */ | |
sim_activate (&com_unit[COM_CHU], com_unit[COM_CHU].wait); | |
break; | |
case CHSL_SNS: /* sense */ | |
sim_activate (&com_unit[COM_SNS], com_unit[COM_SNS].wait); | |
break; | |
case CHSL_CTL: /* control */ | |
default: /* other */ | |
return STOP_ILLIOP; | |
} | |
com_stop = 0; /* clear stop */ | |
com_sta = sel; /* set initial state */ | |
return SCPE_OK; | |
} | |
/* Channel write, from 7909 channel program */ | |
t_stat com_chwr (uint32 ch, t_uint64 val, uint32 stopf) | |
{ | |
if (stopf) | |
com_stop = 1; | |
else { | |
com_chob = val; /* store data */ | |
com_chob_v = 1; /* set valid */ | |
} | |
return SCPE_OK; | |
} | |
/* Unit service - SNS */ | |
t_stat coms_svc (UNIT *uptr) | |
{ | |
t_uint64 dat; | |
switch (com_sta) { /* case on state */ | |
case CHSL_SNS: /* prepare data */ | |
com_sns &= ~COMS_DYN; /* clear dynamic flags */ | |
if (com_free.head) /* free space? */ | |
com_set_sns (COMS_INBF); | |
if (com_test_inp ()) /* pending input? */ | |
com_set_sns (COMS_DATR); | |
com_buf[0] = (com_sns >> 24) & DMASK; /* buffer is 2 words */ | |
com_buf[1] = (com_sns << 12) & DMASK; | |
com_bptr = 0; | |
com_blim = 2; | |
com_sta = CHSL_SNS|CHSL_2ND; /* 2nd state */ | |
break; | |
case CHSL_SNS|CHSL_2ND: /* second state */ | |
if (com_bptr >= com_blim) { /* end of buffer? */ | |
ch9_set_end (com_ch, 0); /* set end */ | |
ch_req |= REQ_CH (com_ch); /* request channel */ | |
com_sta = CHSL_SNS|CHSL_3RD; /* 3rd state */ | |
sim_activate (uptr, 10 * uptr->wait); /* longer wait */ | |
return SCPE_OK; | |
} | |
dat = com_buf[com_bptr++]; /* get word */ | |
if (!com_stop) /* send wd to chan */ | |
ch9_req_rd (com_ch, dat); | |
break; | |
case CHSL_SNS|CHSL_3RD: /* 3rd state */ | |
if (com_qdone (com_ch)) /* done? exit */ | |
return SCPE_OK; | |
com_sta = CHSL_SNS; /* repeat sequence */ | |
break; | |
} | |
sim_activate (uptr, uptr->wait); /* sched next */ | |
return SCPE_OK; | |
} | |
/* Unit service - channel program */ | |
t_stat comc_svc (UNIT *uptr) | |
{ | |
uint32 i, j, k, ccnt, ln, uln; | |
uint16 chr, ent; | |
t_uint64 dat; | |
switch (com_sta) { /* case on state */ | |
case CHSL_RDS: /* read start */ | |
for (i = 0; i < COM_BUFSIZ; i++) /* clear chan buf */ | |
com_buf[i] = 0; | |
com_buf[0] = com_msgn; /* 1st char is msg num */ | |
com_msgn = (com_msgn + 1) & 03777; /* incr msg num */ | |
for (i = 1, j = 0, ln = 0; /* check all lines */ | |
(ln < COM_TLINES) && (i < COMI_12BMAX); /* until buffer full */ | |
ln++) { | |
chr = (uint16) com_gen_ccmp (ln); /* completion msg? */ | |
if ((chr == 0) && coml_unit[ln].INPP) { /* no, line input? */ | |
ent = com_gethd_free (&com_inpq[ln]); /* get first char */ | |
if (ent != 0) /* any input? */ | |
chr = com_pkt[ent].data; /* return char */ | |
else coml_unit[i].INPP = 0; /* this line is idle */ | |
} /* end if input pending */ | |
if (chr != 0) { /* got something? */ | |
if ((i++ % 3) == 0) /* next word? */ | |
j++; | |
com_buf[j] = (com_buf[j] << 12) | /* pack line number */ | |
((t_uint64) ((ln + COM_LBASE) | COMI_VALIDL)); | |
if ((i++ % 3) == 0) /* next word? */ | |
j++; | |
com_buf[j] = (com_buf[j] << 12) | /* pack data */ | |
((t_uint64) (chr & 07777)); | |
} /* end if char */ | |
} /* end for buffer */ | |
for (k = i % 3; k < 3; k++) { /* fill with EOM */ | |
if (k == 0) /* next word? */ | |
j++; | |
com_buf[j] = (com_buf[j] << 12) | COMI_EOM; | |
} | |
com_bptr = 0; /* init buf ptr */ | |
com_blim = j + 1; /* save buf size */ | |
com_sta = CHSL_RDS|CHSL_2ND; /* next state */ | |
break; | |
case CHSL_RDS|CHSL_2ND: /* read xmit word */ | |
if (com_bptr >= com_blim) /* transfer done? */ | |
com_end (com_ch, 0, CHSL_RDS|CHSL_3RD); /* end, next state */ | |
else { /* more to do */ | |
dat = com_buf[com_bptr++]; /* get word */ | |
if (!com_stop) /* give to channel */ | |
ch9_req_rd (com_ch, dat); | |
} | |
break; | |
case CHSL_RDS|CHSL_3RD: /* read end */ | |
if (com_qdone (com_ch)) { /* done? */ | |
if (com_test_inp ()) /* more data waiting? */ | |
ch9_set_atn (com_ch); | |
return SCPE_OK; /* exit */ | |
} | |
com_sta = CHSL_RDS; /* repeat sequence */ | |
break; | |
case CHSL_WRS: /* write start */ | |
for (i = 0; i < COM_BUFSIZ; i++) /* clear chan buf */ | |
com_buf[i] = 0; | |
com_bptr = 0; /* init buf ptr */ | |
com_sta = CHSL_WRS|CHSL_2ND; /* next state */ | |
ch_req |= REQ_CH (com_ch); /* request channel */ | |
com_chob = 0; /* clr, inval buf */ | |
com_chob_v = 0; | |
break; | |
case CHSL_WRS|CHSL_2ND: /* write first word */ | |
dat = com_getob (com_ch); /* get word? */ | |
if (dat == 0777777777777) { /* turn on? */ | |
com_enab = 1; /* enable 7750 */ | |
com_msgn = 0; /* init message # */ | |
com_end (com_ch, 0, CHSL_WRS|CHSL_4TH); /* end, last state */ | |
} | |
else if (dat & COMO_LINCTL) { /* control message? */ | |
ln = COMO_GETLN (dat); /* line number */ | |
if (ln >= (COM_TLINES + COM_LBASE)) /* invalid line? */ | |
return STOP_INVLIN; | |
chr = (uint16) ((dat >> 12) & 07777); /* control message */ | |
if (chr != COMO_CTLRST) /* char must be 0 */ | |
return STOP_INVMSG; | |
if (ln >= COM_LBASE) | |
com_reset_ln (ln - COM_LBASE); | |
com_end (com_ch, 0, CHSL_WRS|CHSL_4TH); /* end, last state */ | |
} | |
else { /* data message */ | |
ccnt = (((uint32) dat >> 12) & 07777) + 1; /* char count plus EOM */ | |
if (dat & COMO_LIN12B) /* 12b? double */ | |
ccnt = ccnt << 1; | |
com_blim = (ccnt + 6 + 5) / 6; /* buffer limit */ | |
if ((com_blim == 1) || (com_blim >= COMO_BMAX)) | |
return STOP_INVMSG; | |
com_buf[com_bptr++] = dat; /* store word */ | |
com_sta = CHSL_WRS|CHSL_3RD; /* next state */ | |
ch_req |= REQ_CH (com_ch); /* request channel */ | |
} | |
break; | |
case CHSL_WRS|CHSL_3RD: /* other words */ | |
dat = com_getob (com_ch); /* get word */ | |
com_buf[com_bptr++] = dat; /* store word */ | |
if (com_bptr >= com_blim) { /* transfer done? */ | |
ln = COMO_GETLN (com_buf[0]); /* line number */ | |
if (ln >= (COM_TLINES + COM_LBASE)) /* invalid line? */ | |
return STOP_INVLIN; | |
if ((com_buf[0] & COMO_LIN12B) && /* 12b message? */ | |
(ln >= COM_LBASE)) { | |
uln = ln - COM_LBASE; /* unit number */ | |
for (i = 2, j = 0; i < COMO_12BMAX; i++) { /* unpack 12b char */ | |
if ((i % 3) == 0) | |
j++; | |
chr = (uint16) (com_buf[j] >> ((2 - (i % 3)) * 12)) & 07777; | |
if (chr == COMO_EOM12B) /* EOM? */ | |
break; | |
if (!com_new_puttl (&com_outq[uln], chr)) | |
return STOP_NOOFREE; /* append to outq */ | |
} | |
sim_activate (&coml_unit[uln], coml_unit[uln].wait); | |
} | |
com_end (com_ch, 0, CHSL_WRS|CHSL_4TH); /* end, last state */ | |
} | |
else if (!com_stop) /* request channel */ | |
ch_req |= REQ_CH (com_ch); | |
break; | |
case CHSL_WRS|CHSL_4TH: /* buffer done */ | |
if (com_qdone (com_ch)) /* done? */ | |
return SCPE_OK; /* exit */ | |
com_sta = CHSL_WRS; /* repeat sequence */ | |
break; | |
default: | |
return SCPE_IERR; | |
} | |
sim_activate (uptr, uptr->wait); | |
return SCPE_OK; | |
} | |
/* Unit service - console receive - always running, even if device is not */ | |
t_stat comti_svc (UNIT *uptr) | |
{ | |
int32 c, ln = COM_MLINES; | |
uint16 ent; | |
sim_activate (uptr, uptr->wait); /* continue poll */ | |
c = sim_poll_kbd (); /* get character */ | |
if (c && !(c & (SCPE_BREAK|SCPE_KFLAG))) /* error? */ | |
return c; | |
if (!com_enab || (c & SCPE_BREAK)) /* !enab, break? done */ | |
return SCPE_OK; | |
if (coml_unit[ln].NEEDID) /* ID needed? */ | |
return com_send_id (ln); | |
if ((c & SCPE_KFLAG) && ((c = c & 0177) != 0)) { /* char input? */ | |
if ((c == 0177) || (c == '\b')) { /* delete? */ | |
ent = com_gettl_free (&com_inpq[ln]); /* remove last char */ | |
if (!coml_unit[ln].NOECHO) | |
sim_putchar (ent? '\b': '\a'); | |
return SCPE_OK; | |
} | |
if (!com_queue_in (ln, c)) /* add to inp queue */ | |
return STOP_NOIFREE; | |
if (!coml_unit[ln].NOECHO) { /* echo enabled? */ | |
if (sim_tt_outcvt (c, TT_MODE_7P) >= 0) /* printable? */ | |
sim_putchar (c); | |
if (c == '\r') /* line end? */ | |
sim_putchar ('\n'); | |
} | |
} | |
return SCPE_OK; /* set ATN if input */ | |
} | |
/* Unit service - receive side | |
Poll all active lines for input | |
Poll for new connections */ | |
t_stat comi_svc (UNIT *uptr) | |
{ | |
int32 c, ln, t; | |
uint16 ent; | |
if ((uptr->flags & UNIT_ATT) == 0) /* attached? */ | |
return SCPE_OK; | |
t = sim_rtcn_calb (com_tps, TMR_COM); /* calibrate */ | |
sim_activate (uptr, t); /* continue poll */ | |
if (!com_enab) /* not enabled? exit */ | |
return SCPE_OK; | |
ln = tmxr_poll_conn (&com_desc); /* look for connect */ | |
if (ln >= 0) { /* got one? */ | |
com_ldsc[ln].rcve = 1; /* rcv enabled */ | |
coml_unit[ln].CONN = 1; /* flag connected */ | |
coml_unit[ln].NEEDID = 1; /* need ID */ | |
coml_unit[ln].NOECHO = 0; /* echo enabled */ | |
coml_unit[ln].INPP = 0; /* no input pending */ | |
} | |
tmxr_poll_rx (&com_desc); /* poll for input */ | |
for (ln = 0; ln < COM_MLINES; ln++) { /* loop thru mux */ | |
if (com_ldsc[ln].conn) { /* connected? */ | |
if (coml_unit[ln].NEEDID) | |
return com_send_id (ln); | |
c = tmxr_getc_ln (&com_ldsc[ln]); /* get char */ | |
if (c) { /* any char? */ | |
c = c & 0177; /* mask to 7b */ | |
if ((c == 0177) || (c == '\b')) { /* delete? */ | |
ent = com_gettl_free (&com_inpq[ln]); /* remove last char */ | |
if (!coml_unit[ln].NOECHO) | |
tmxr_putc_ln (&com_ldsc[ln], ent? '\b': '\a'); | |
return SCPE_OK; | |
} | |
if (!com_queue_in (ln, c)) /* queue char, err? */ | |
return STOP_NOIFREE; | |
if (com_ldsc[ln].xmte) { /* output enabled? */ | |
if (!coml_unit[ln].NOECHO) { /* echo enabled? */ | |
if (sim_tt_outcvt (c, TT_MODE_7P) >= 0) | |
tmxr_putc_ln (&com_ldsc[ln], c); | |
if (c == '\r') /* add LF after CR */ | |
tmxr_putc_ln (&com_ldsc[ln], '\n'); | |
} | |
tmxr_poll_tx (&com_desc); /* poll xmt */ | |
} /* end if enabled */ | |
} /* end if char */ | |
} /* end if conn */ | |
else if (coml_unit[ln].CONN) { /* not conn, was conn? */ | |
coml_unit[ln].CONN = 0; /* clear connected */ | |
coml_unit[ln].NEEDID = 0; /* clear need id */ | |
com_set_inpp (ln); /* input pending, ATN1 */ | |
if (!com_new_puttl (&com_inpq[ln], COMI_HANGUP))/* hangup message */ | |
return STOP_NOIFREE; | |
} | |
} /* end for */ | |
return SCPE_OK; | |
} | |
/* Unit service - console transmit */ | |
t_stat comto_svc (UNIT *uptr) | |
{ | |
uint32 ln = COM_MLINES; | |
uint32 c, c1; | |
c = com_queue_out (ln, &c1); /* get character, cvt */ | |
if (c) /* printable? output */ | |
sim_putchar (c); | |
if (c1) /* second char? output */ | |
sim_putchar (c1); | |
if (com_outq[ln].head == 0) /* line idle? */ | |
ch9_set_atn (com_ch); /* set ATN1 */ | |
else sim_activate (uptr, uptr->wait); /* next char */ | |
return SCPE_OK; | |
} | |
/* Unit service - transmit side */ | |
t_stat como_svc (UNIT *uptr) | |
{ | |
uint32 c, c1; | |
int32 ln = uptr - coml_unit; /* line # */ | |
if (com_ldsc[ln].conn) { /* connected? */ | |
if (com_ldsc[ln].xmte) { /* output enabled? */ | |
c = com_queue_out (ln, &c1); /* get character, cvt */ | |
if (c) /* printable? output */ | |
tmxr_putc_ln (&com_ldsc[ln], c); | |
if (c1) /* print second */ | |
tmxr_putc_ln (&com_ldsc[ln], c1); | |
} /* end if */ | |
tmxr_poll_tx (&com_desc); /* poll xmt */ | |
if (com_outq[ln].head == 0) /* line idle? */ | |
ch9_set_atn (com_ch); /* set ATN1 */ | |
else sim_activate (uptr, uptr->wait); /* next char */ | |
} /* end if conn */ | |
return SCPE_OK; | |
} | |
/* Send ID sequence on input */ | |
t_stat com_send_id (uint32 ln) | |
{ | |
com_new_puttl (&com_inpq[ln], COMI_DIALUP); /* input message: */ | |
if (coml_unit[ln].flags & UNIT_K35) /* dialup, ID, endID */ | |
com_new_puttl (&com_inpq[ln], COMI_K35); | |
else com_new_puttl (&com_inpq[ln], COMI_K37); | |
com_new_puttl (&com_inpq[ln], 0); | |
com_new_puttl (&com_inpq[ln], 0); | |
com_new_puttl (&com_inpq[ln], 0); | |
com_new_puttl (&com_inpq[ln], 0); | |
com_new_puttl (&com_inpq[ln], (uint16) (ln + COM_LBASE)); | |
if (!com_new_puttl (&com_inpq[ln], COMI_ENDID)) /* make sure there */ | |
return STOP_NOIFREE; /* was room for msg */ | |
coml_unit[ln].NEEDID = 0; | |
com_set_inpp (ln); /* input pending, ATN1 */ | |
return SCPE_OK; | |
} | |
/* Translate and queue input character */ | |
t_bool com_queue_in (uint32 ln, uint32 c) | |
{ | |
uint16 out; | |
if (c == com_intr) { | |
out = COMI_INTR; | |
com_set_inpp (ln); | |
} | |
else if (c == com_quit) { | |
out = COMI_QUIT; | |
com_set_inpp (ln); | |
} | |
else { | |
if (c == '\r') | |
com_set_inpp (ln); | |
if (coml_unit[ln].flags & UNIT_K35) { /* KSR-35? */ | |
if (islower (c)) /* convert LC to UC */ | |
c = toupper (c); | |
} | |
else c |= (com_epar[c]? COMI_PARITY: 0); /* add even parity */ | |
out = (~c) & 0377; /* 1's complement */ | |
} | |
return com_new_puttl (&com_inpq[ln], out); /* input message */ | |
} | |
/* Retrieve and translate output character */ | |
uint32 com_queue_out (uint32 ln, uint32 *c1) | |
{ | |
uint32 c, ent, raw; | |
*c1 = 0; /* assume non-printing */ | |
if ((ent = com_gethd_free (&com_outq[ln])) == 0) /* get character */ | |
return 0; /* nothing, exit */ | |
raw = com_pkt[ent].data; /* get 12b character */ | |
com_not_ret[ln]++; | |
if (raw == COMO_BITRPT) { /* insert delay? */ | |
if (com_gethd_free (&com_outq[ln])) /* skip next char */ | |
com_not_ret[ln]++; /* and count it */ | |
return 0; | |
} | |
c = (~raw >> 1) & 0177; /* remove start, parity */ | |
if ((c >= 040) && (c != 0177)) { /* printable? */ | |
if ((coml_unit[ln].flags & UNIT_K35) && islower (c))/* KSR-35 LC? */ | |
c = toupper (c); /* cvt to UC */ | |
return c; | |
} | |
switch (c) { | |
case '\t': case '\f': case '\b': case '\a': /* valid ctrls */ | |
return c; | |
case '\r': /* carriage return? */ | |
*c1 = '\n'; /* lf after cr */ | |
return c; | |
case '\n': /* line feed? */ | |
*c1 = '\n'; /* lf after cr */ | |
return '\r'; | |
case 022: /* DC2 */ | |
coml_unit[ln].NOECHO = 1; | |
return 0; | |
case 024: /* DC4 */ | |
coml_unit[ln].NOECHO = 0; | |
return 0; | |
} | |
return 0; /* ignore others */ | |
} | |
/* Generate completion message, if needed */ | |
uint32 com_gen_ccmp (uint32 ln) | |
{ | |
uint32 t; | |
if ((t = com_not_ret[ln]) != 0) { /* chars not returned? */ | |
if (t > COMI_CMAX) /* limit to max */ | |
t = COMI_CMAX; | |
com_not_ret[ln] -= t; /* keep count */ | |
return COMI_COMP (t); /* gen completion msg */ | |
} | |
return 0; | |
} | |
/* Read and validate output buffer */ | |
t_uint64 com_getob (uint32 ch) | |
{ | |
if (com_chob_v) /* valid? clear */ | |
com_chob_v = 0; | |
else if (!com_stop) { /* not stopped? */ | |
ch9_set_ioc (com_ch); /* IO check */ | |
com_set_sns (COMS_ITMO); /* set sense bit */ | |
} | |
return com_chob; | |
} | |
/* Test whether input pending */ | |
t_bool com_test_inp (void) | |
{ | |
uint32 i; | |
for (i = 0; i < COM_TLINES; i++) { | |
if ((com_not_ret[i] != 0) || coml_unit[i].INPP) | |
return TRUE; | |
} | |
return FALSE; | |
} | |
/* Set input pending and attention */ | |
void com_set_inpp (uint32 ln) | |
{ | |
coml_unit[ln].INPP = 1; | |
ch9_set_atn (com_ch); | |
return; | |
} | |
/* Test for done */ | |
t_bool com_qdone (uint32 ch) | |
{ | |
if (com_stop || !ch9_qconn (ch)) { /* stop or err disc? */ | |
com_sta = 0; /* ctrl is idle */ | |
return TRUE; | |
} | |
return FALSE; | |
} | |
/* Channel end */ | |
void com_end (uint32 ch, uint32 fl, uint32 st) | |
{ | |
ch9_set_end (ch, fl); /* set end */ | |
ch_req |= REQ_CH (ch); | |
com_sta = st; /* next state */ | |
return; | |
} | |
/* List routines - remove from head and free */ | |
uint16 com_gethd_free (LISTHD *lh) | |
{ | |
uint16 ent; | |
if ((ent = com_gethd (lh)) != 0) | |
com_puttl (&com_free, ent); | |
return ent; | |
} | |
/* Remove from tail and free */ | |
uint16 com_gettl_free (LISTHD *lh) | |
{ | |
uint16 ent; | |
if ((ent = com_gethd (lh)) != 0) | |
com_puttl (&com_free, ent); | |
return ent; | |
} | |
/* Get free entry and insert at tail */ | |
t_bool com_new_puttl (LISTHD *lh, uint16 val) | |
{ | |
uint16 ent; | |
if ((ent = com_gethd (&com_free)) != 0) { | |
com_pkt[ent].data = val; | |
com_puttl (lh, ent); | |
return TRUE; | |
} | |
return FALSE; | |
} | |
/* Remove from head */ | |
uint16 com_gethd (LISTHD *lh) | |
{ | |
uint16 ent; | |
if ((ent = lh->head) != 0) { | |
lh->head = com_pkt[ent].next; | |
if (lh->head == 0) | |
lh->tail = 0; | |
} | |
else lh->tail = 0; | |
return ent; | |
} | |
/* Remove from tail */ | |
uint16 com_gettl (LISTHD *lh) | |
{ | |
uint16 ent, next; | |
uint32 i; | |
ent = lh->tail; | |
if (lh->head == lh->tail) { | |
lh->head = lh->tail = 0; | |
return ent; | |
} | |
next = lh->head; | |
for (i = 0; i < COM_PKTSIZ; i++) { | |
if (com_pkt[next].next == ent) { | |
com_pkt[next].next = 0; | |
lh->tail = next; | |
return ent; | |
} | |
} | |
return 0; | |
} | |
/* Insert at tail */ | |
void com_puttl (LISTHD *lh, uint16 ent) | |
{ | |
if (lh->tail == 0) | |
lh->head = ent; | |
else com_pkt[lh->tail].next = ent; | |
com_pkt[ent].next = 0; | |
lh->tail = ent; | |
return; | |
} | |
/* Set flag in sense */ | |
void com_set_sns (t_uint64 stat) | |
{ | |
com_sns |= stat; | |
com_sns &= ~(COMS_PCHK|COMS_DCHK|COMS_EXCC); | |
if (com_sns & COMS_PALL) | |
com_sns |= COMS_PCHK; | |
if (com_sns & COMS_DALL) | |
com_sns |= COMS_DCHK; | |
if (com_sns & COMS_EALL) | |
com_sns |= COMS_EXCC; | |
return; | |
} | |
/* Reset routine */ | |
t_stat com_reset (DEVICE *dptr) | |
{ | |
uint32 i; | |
if (dptr->flags & DEV_DIS) { /* disabled? */ | |
com_dev.flags = com_dev.flags | DEV_DIS; /* disable lines */ | |
coml_dev.flags = coml_dev.flags | DEV_DIS; | |
} | |
else { | |
com_dev.flags = com_dev.flags & ~DEV_DIS; /* enable lines */ | |
coml_dev.flags = coml_dev.flags & ~DEV_DIS; | |
} | |
sim_activate (&com_unit[COM_CIU], com_unit[COM_CIU].wait); /* console */ | |
sim_cancel (&com_unit[COM_PLU]); | |
sim_cancel (&com_unit[COM_CHU]); | |
if (com_unit[COM_PLU].flags & UNIT_ATT) { /* master att? */ | |
int32 t = sim_rtcn_init (com_unit[COM_PLU].wait, TMR_COM); | |
sim_activate (&com_unit[COM_PLU], t); | |
} | |
com_enab = 0; | |
com_sns = 0; | |
com_msgn = 0; | |
com_sta = 0; | |
com_chob = 0; | |
com_chob_v = 0; | |
com_stop = 0; | |
com_bptr = 0; | |
com_blim = 0; | |
for (i = 0; i < COM_BUFSIZ; i++) | |
com_buf[i] = 0; | |
for (i = 0; i < COM_TLINES; i++) { /* init lines */ | |
com_inpq[i].head = 0; | |
com_inpq[i].tail = 0; | |
com_outq[i].head = 0; | |
com_outq[i].tail = 0; | |
com_reset_ln (i); | |
} | |
com_pkt[0].next = 0; /* init free list */ | |
for (i = 1; i < COM_PKTSIZ; i++) { | |
com_pkt[i].next = i + 1; | |
com_pkt[i].data = 0; | |
} | |
com_pkt[COM_PKTSIZ - 1].next = 0; /* end of free list */ | |
com_free.head = 1; | |
com_free.tail = COM_PKTSIZ - 1; | |
coml_unit[COM_MLINES].CONN = 1; /* console always conn */ | |
coml_unit[COM_MLINES].NEEDID = 1; | |
return SCPE_OK; | |
} | |
/* Attach master unit */ | |
t_stat com_attach (UNIT *uptr, char *cptr) | |
{ | |
t_stat r; | |
r = tmxr_attach (&com_desc, uptr, cptr); /* attach */ | |
if (r != SCPE_OK) /* error */ | |
return r; | |
sim_rtcn_init (uptr->wait, TMR_COM); | |
sim_activate (uptr, 100); /* quick poll */ | |
return SCPE_OK; | |
} | |
/* Detach master unit */ | |
t_stat com_detach (UNIT *uptr) | |
{ | |
uint32 i; | |
t_stat r; | |
r = tmxr_detach (&com_desc, uptr); /* detach */ | |
for (i = 0; i < COM_MLINES; i++) /* disable rcv */ | |
com_ldsc[i].rcve = 0; | |
sim_cancel (uptr); /* stop poll */ | |
return r; | |
} | |
/* Reset an individual line */ | |
void com_reset_ln (uint32 ln) | |
{ | |
while (com_gethd_free (&com_inpq[ln])) ; | |
while (com_gethd_free (&com_outq[ln])) ; | |
com_not_ret[ln] = 0; | |
coml_unit[ln].NEEDID = 0; | |
coml_unit[ln].NOECHO = 0; | |
coml_unit[ln].INPP = 0; | |
sim_cancel (&coml_unit[ln]); | |
if ((ln < COM_MLINES) && (com_ldsc[ln].conn == 0)) | |
coml_unit[ln].CONN = 0; | |
return; | |
} | |
/* Special show commands */ | |
uint32 com_show_qsumm (FILE *st, LISTHD *lh, char *name) | |
{ | |
uint32 i, next; | |
next = lh->head; | |
for (i = 0; i < COM_PKTSIZ; i++) { | |
if (next == 0) { | |
if (i == 0) | |
fprintf (st, "%s is empty\n", name); | |
else if (i == 1) | |
fprintf (st, "%s has 1 entry\n", name); | |
else fprintf (st, "%s has %d entries\n", name, i); | |
return i; | |
} | |
next = com_pkt[next].next; | |
} | |
fprintf (st, "%s is corrupt\n", name); | |
return 0; | |
} | |
void com_show_char (FILE *st, uint32 ch) | |
{ | |
uint32 c; | |
fprintf (st, "%03o", ch); | |
c = (~ch) & 0177; | |
if (((ch & 07400) == 0) && (c >= 040) && (c != 0177)) | |
fprintf (st, "[%c]", c); | |
return; | |
} | |
t_stat com_show_freeq (FILE *st, UNIT *uptr, int32 val, void *desc) | |
{ | |
com_show_qsumm (st, &com_free, "Free queue"); | |
return SCPE_OK; | |
} | |
t_stat com_show_oneq (FILE *st, UNIT *uptr, int32 val, void *desc) | |
{ | |
uint32 entc, ln, i, next; | |
LISTHD *lh; | |
char name[20]; | |
ln = uptr - coml_dev.units; | |
sprintf (name, val? "Output queue %d": "Input queue %d", ln); | |
lh = val? &com_outq[ln]: &com_inpq[ln]; | |
if (entc = com_show_qsumm (st, lh, name)) { | |
for (i = 0, next = lh->head; next != 0; | |
i++, next = com_pkt[next].next) { | |
if ((i % 8) == 0) | |
fprintf (st, "%d:\t", i); | |
com_show_char (st, com_pkt[next].data >> (val? 1: 0)); | |
fputc ((((i % 8) == 7)? '\n': '\t'), st); | |
} | |
if (i % 8) | |
fputc ('\n', st); | |
} | |
return SCPE_OK; | |
} | |
t_stat com_show_allq (FILE *st, UNIT *uptr, int32 val, void *desc) | |
{ | |
uint32 i; | |
for (i = 0; i < COM_TLINES; i++) | |
com_show_oneq (st, coml_dev.units + i, val, desc); | |
return SCPE_OK; | |
} | |
t_stat com_show_ctrl (FILE *st, UNIT *uptr, int32 val, void *desc) | |
{ | |
if (!com_enab) | |
fprintf (st, "Controller is not initialized\n"); | |
if (val & COMR_FQ) | |
com_show_freeq (st, uptr, 0, desc); | |
if (val & COMR_IQ) | |
com_show_allq (st, uptr, 0, desc); | |
if (val & COMR_OQ) | |
com_show_allq (st, uptr, 1, desc); | |
return SCPE_OK; | |
} |