/* vax730_rb.c: RB730 disk simulator | |
Copyright (c) 2010-2011, Matt Burke | |
This module incorporates code from SimH, Copyright (c) 1993-2008, Robert M Supnik | |
Permission is hereby granted, free of charge, to any person obtaining a | |
copy of this software and associated documentation files (the "Software"), | |
to deal in the Software without restriction, including without limitation | |
the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
and/or sell copies of the Software, and to permit persons to whom the | |
Software is furnished to do so, subject to the following conditions: | |
The above copyright notice and this permission notice shall be included in | |
all copies or substantial portions of the Software. | |
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
THE AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
Except as contained in this notice, the name(s) of the author(s) shall not be | |
used in advertising or otherwise to promote the sale, use or other dealings | |
in this Software without prior written authorization from the author(s). | |
rb RB730 - RB02/RB80 disk controller | |
29-Mar-2011 MB First Version | |
The RB730 is a four drive disk subsystem consisting of up to three RL02 | |
drives (known as RB02) and one optional RA80 drive (known as RB80). | |
Unlike the RL11 controller seeks are not done relative to the current | |
disk address. | |
The RB730 has two regiter address spaces: | |
- One dummy 16-bit register in unibus I/O space to allow the controller to | |
be detected by SYSGEN autoconfigure (and others). | |
- Eight 32-bit registers in the unibus controller space for the actual | |
device control. | |
*/ | |
#include "vax_defs.h" | |
/* Constants */ | |
#define RB02_NUMWD 128 /* words/sector */ | |
#define RB02_NUMSC 40 /* sectors/track */ | |
#define RB02_NUMSF 2 /* tracks/cylinder */ | |
#define RB02_NUMCY 512 /* cylinders/drive */ | |
#define RB02_SIZE (RB02_NUMCY * RB02_NUMSF * \ | |
RB02_NUMSC * RB02_NUMWD) /* words/drive */ | |
#define RB80_NUMWD 256 /* words/sector */ | |
#define RB80_NUMSC 32 /* sectors/track */ | |
#define RB80_NUMSF 14 /* tracks/cylinder */ | |
#define RB80_NUMCY 559 /* cylinders/drive */ | |
#define RB80_SIZE (RB80_NUMCY * RB80_NUMSF * \ | |
RB80_NUMSC * RB80_NUMWD) /* words/drive */ | |
#define RB_NUMWD(u) ((u->flags & UNIT_RB80) ? RB80_NUMWD : RB02_NUMWD) | |
#define RB_NUMSC(u) ((u->flags & UNIT_RB80) ? RB80_NUMSC : RB02_NUMSC) | |
#define RB_NUMSF(u) ((u->flags & UNIT_RB80) ? RB80_NUMSF : RB02_NUMSF) | |
#define RB_NUMCY(u) ((u->flags & UNIT_RB80) ? RB80_NUMCY : RB02_NUMCY) | |
#define RB_SIZE(u) ((u->flags & UNIT_RB80) ? RB80_SIZE : RB02_SIZE) | |
#define RB_NUMDR 4 /* drives/controller */ | |
#define RB_MAXFR (1 << 16) /* max transfer */ | |
/* Flags in the unit flags word */ | |
#define UNIT_V_WLK (UNIT_V_UF + 0) /* hwre write lock */ | |
#define UNIT_V_RB80 (UNIT_V_UF + 1) /* RB02 vs RB80 */ | |
#define UNIT_V_DUMMY (UNIT_V_UF + 2) /* dummy flag */ | |
#define UNIT_DUMMY (1 << UNIT_V_DUMMY) | |
#define UNIT_WLK (1u << UNIT_V_WLK) | |
#define UNIT_RB80 (1u << UNIT_V_RB80) | |
#define UNIT_WPRT (UNIT_WLK | UNIT_RO) /* write protected */ | |
/* Parameters in the unit descriptor */ | |
#define TRK u3 /* current track */ | |
#define STAT u4 /* status */ | |
#define SIP u5 /* seek in progress */ | |
/* RBDS, NI = not implemented, * = kept in STAT, ^ = kept in TRK */ | |
#define RB02DS_LOAD 0 /* no cartridge */ | |
#define RB02DS_LOCK 5 /* lock on */ | |
#define RB02DS_BHO 0000010 /* brushes home NI */ | |
#define RB02DS_HDO 0000020 /* heads out NI */ | |
#define RB02DS_CVO 0000040 /* cover open NI */ | |
#define RB02DS_HD 0000100 /* head select ^ */ | |
#define RB02DS_DSE 0000400 /* drv sel err NI */ | |
#define RB02DS_VCK 0001000 /* vol check * */ | |
#define RB02DS_WGE 0002000 /* wr gate err * */ | |
#define RB02DS_SPE 0004000 /* spin err * */ | |
#define RB02DS_STO 0010000 /* seek time out NI */ | |
#define RB02DS_WLK 0020000 /* wr locked */ | |
#define RB02DS_HCE 0040000 /* hd curr err NI */ | |
#define RB02DS_WDE 0100000 /* wr data err NI */ | |
#define RB02DS_ATT (RB02DS_HDO+RB02DS_BHO+RB02DS_LOCK) /* att status */ | |
#define RB02DS_UNATT (RB02DS_CVO+RB02DS_LOAD) /* unatt status */ | |
#define RB02DS_ERR (RB02DS_WDE+RB02DS_HCE+RB02DS_STO+RB02DS_SPE+RB02DS_WGE+ \ | |
RB02DS_VCK+RB02DS_DSE) /* errors bits */ | |
#define RB80DS_SCNT 0x0000000F | |
#define RB80DS_FLT 0x00000100 | |
#define RB80DS_PLV 0x00000200 | |
#define RB80DS_SKE 0x00000400 | |
#define RB80DS_OCY 0x00000800 | |
#define RB80DS_RDY 0x00001000 | |
#define RB80DS_WLK 0x00002000 | |
/* RBCS */ | |
#define RBCS_DRDY 0x00000001 /* drive ready */ | |
#define RBCS_M_FUNC 0x7 /* function */ | |
#define RBCS_NOP 0 | |
#define RBCS_WCHK 1 | |
#define RBCS_GSTA 2 | |
#define RBCS_SEEK 3 | |
#define RBCS_RHDR 4 | |
#define RBCS_WRITE 5 | |
#define RBCS_READ 6 | |
#define RBCS_RNOHDR 7 | |
#define RBCS_V_FUNC 1 | |
#define RBCS_M_DRIVE 0x3 | |
#define RBCS_V_DRIVE 8 | |
#define RBCS_INCMP 0x00000400 /* incomplete */ | |
#define RBCS_CRC 0x00000800 /* CRC error */ | |
#define RBCS_DLT 0x00001000 /* data late */ | |
#define RBCS_HDE 0x00001400 /* header error */ | |
#define RBCS_NXM 0x00002000 /* non-exist memory */ | |
#define RBCS_DRE 0x00004000 /* drive error */ | |
#define RBCS_ERR 0x00008000 /* error summary */ | |
#define RBCS_ALLERR (RBCS_ERR+RBCS_DRE+RBCS_NXM+RBCS_CRC+RBCS_INCMP) | |
#define RBCS_M_ATN 0xF | |
#define RBCS_V_ATN 16 | |
#define RBCS_ATN (RBCS_M_ATN << RBCS_V_ATN) | |
#define RBCS_M_ECC 0x2 | |
#define RBCS_V_ECC 20 | |
#define RBCS_SSI 0x00400000 | |
#define RBCS_SSE 0x00800000 | |
#define RBCS_IRQ 0x01000000 | |
#define RBCS_MTN 0x02000000 | |
#define RBCS_R80 0x04000000 | |
#define RBCS_ASI 0x08000000 | |
#define RBCS_TOI 0x10000000 | |
#define RBCS_FMT 0x20000000 | |
#define RBCS_MATN 0x80000000 | |
//#define RBCS_RW 0001716 /* read/write */ | |
#define RBCS_RW ((RBCS_M_FUNC << RBCS_V_FUNC) + \ | |
CSR_IE + CSR_DONE + \ | |
(RBCS_M_DRIVE << RBCS_V_DRIVE) + \ | |
RBCS_SSI + RBCS_MTN + RBCS_ASI + \ | |
RBCS_TOI + RBCS_FMT + RBCS_MATN) | |
#define RBCS_C0 RBCS_SSE | |
#define RBCS_C1 (rbcs & RBCS_MATN) ? RBCS_IRQ : \ | |
((RBCS_M_ATN << RBCS_V_ATN) + RBCS_IRQ) | |
#define GET_FUNC(x) (((x) >> RBCS_V_FUNC) & RBCS_M_FUNC) | |
#define GET_DRIVE(x) (((x) >> RBCS_V_DRIVE) & RBCS_M_DRIVE) | |
/* RBBA */ | |
#define RBBA_RW 0x0003FFFF | |
/* RBBC */ | |
/* RBMP */ | |
#define RBMP_MRK 0x00000001 | |
#define RBMP_GST 0x00000002 | |
#define RBMP_RST 0x00000008 | |
/* RBDA */ | |
#define RBDA_V_SECT 0 /* sector */ | |
#define RBDA_M_SECT 0xFF | |
#define RBDA_V_TRACK 8 /* track */ | |
#define RBDA_M_TRACK 0xFF | |
#define RBDA_V_CYL 16 /* cylinder */ | |
#define RBDA_M_CYL 0xFFFF | |
#define RBDA_TRACK (RBDA_M_TRACK << RBDA_V_TRACK) | |
#define RBDA_CYL (RBDA_M_CYL << RBDA_V_CYL) | |
#define GET_SECT(x) (((x) >> RBDA_V_SECT) & RBDA_M_SECT) | |
#define GET_CYL(x) (((x) >> RBDA_V_CYL) & RBDA_M_CYL) | |
#define GET_TRACK(x) (((x) >> RBDA_V_TRACK) & RBDA_M_TRACK) | |
//#define GET_DA(x) ((GET_CYL(x) * RB02_NUMSF * GET_TRACK (x) * RB02_NUMSC) + GET_SECT (x)) | |
#define GET_DA(x,u) ((GET_TRACK (x) * RB_NUMCY(u) * RB_NUMSC(u) * RB_NUMWD(u)) + \ | |
(GET_CYL(x) * RB_NUMSC(u) * RB_NUMWD(u)) + \ | |
(GET_SECT (x) * RB_NUMWD(u))) | |
#define DBG_REG 0x0001 /* registers */ | |
#define DBG_CMD 0x0002 /* commands */ | |
#define DBG_RD 0x0004 /* disk reads */ | |
#define DBG_WR 0x0008 /* disk writes */ | |
extern int32 int_req[IPL_HLVL]; | |
uint16 *rbxb = NULL; /* xfer buffer */ | |
int32 rbcs = 0; /* control/status */ | |
int32 rbba = 0; /* memory address */ | |
int32 rbbc = 0; /* bytes count */ | |
int32 rbda = 0; /* disk addr */ | |
int32 rbmp = 0, rbmp1 = 0, rbmp2 = 0; /* mp register queue */ | |
int32 rb_swait = 150; /* seek wait */ | |
int32 rb_mwait = 300; /* seek wait */ | |
int32 rb_cwait = 50; /* seek wait */ | |
t_stat rb_rd16 (int32 *data, int32 PA, int32 access); | |
t_stat rb_wr16 (int32 data, int32 PA, int32 access); | |
t_stat rb_rd32 (int32 *data, int32 PA, int32 access); | |
t_stat rb_wr32 (int32 data, int32 PA, int32 access); | |
t_stat rb_svc (UNIT *uptr); | |
t_stat rb_reset (DEVICE *dptr); | |
void rb_set_done (int32 error); | |
t_stat rb_attach (UNIT *uptr, char *cptr); | |
t_stat rb_set_size (UNIT *uptr, int32 val, char *cptr, void *desc); | |
t_stat rb_set_bad (UNIT *uptr, int32 val, char *cptr, void *desc); | |
/* RB730 data structures | |
rb_dev RB device descriptor | |
rb_unit RB unit list | |
rb_reg RB register list | |
rb_mod RB modifier list | |
*/ | |
#define IOLN_RB 002 | |
DIB rb_dib = { | |
IOBA_AUTO, IOLN_RB, &rb_rd16, &rb_wr16, | |
1, IVCL (RB), VEC_AUTO, { NULL } }; | |
UNIT rb_unit[] = { | |
{ UDATA (&rb_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+ | |
UNIT_ROABLE+UNIT_RB80, RB80_SIZE) }, | |
{ UDATA (&rb_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+ | |
UNIT_ROABLE, RB02_SIZE) }, | |
{ UDATA (&rb_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+ | |
UNIT_ROABLE, RB02_SIZE) }, | |
{ UDATA (&rb_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+ | |
UNIT_ROABLE, RB02_SIZE) }, | |
}; | |
REG rb_reg[] = { | |
{ NULL } | |
}; | |
DEBTAB rb_debug[] = { | |
{"REG", DBG_REG}, | |
{"CMD", DBG_CMD}, | |
{"RD", DBG_RD}, | |
{"WR", DBG_WR}, | |
{0} | |
}; | |
MTAB rb_mod[] = { | |
{ UNIT_WLK, 0, "write enabled", "WRITEENABLED", NULL }, | |
{ UNIT_WLK, UNIT_WLK, "write locked", "LOCKED", NULL }, | |
{ UNIT_DUMMY, 0, NULL, "BADBLOCK", &rb_set_bad }, | |
{ (UNIT_RB80+UNIT_ATT), UNIT_ATT, "RB02", NULL, NULL }, | |
{ (UNIT_RB80+UNIT_ATT), (UNIT_RB80+UNIT_ATT), "RB80", NULL, NULL }, | |
{ (UNIT_RB80+UNIT_ATT), 0, "RB02", NULL, NULL }, | |
{ (UNIT_RB80+UNIT_ATT), UNIT_RB80, "RB80", NULL, NULL }, | |
{ (UNIT_RB80), 0, NULL, "RB02", &rb_set_size }, | |
{ (UNIT_RB80), UNIT_RB80, NULL, "RB80", &rb_set_size }, | |
{ MTAB_XTD|MTAB_VDV, 010, "ADDRESS", "ADDRESS", | |
&set_addr, &show_addr, NULL }, | |
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", "VECTOR", | |
&set_vec, &show_vec, NULL }, | |
{ 0 } | |
}; | |
DEVICE rb_dev = { | |
"RB", rb_unit, rb_reg, rb_mod, | |
RB_NUMDR, DEV_RDX, T_ADDR_W, 1, DEV_RDX, 16, | |
NULL, NULL, &rb_reset, | |
NULL, &rb_attach, NULL, | |
&rb_dib, DEV_DISABLE | DEV_UBUS | DEV_DEBUG, 0, | |
rb_debug, 0, 0 | |
}; | |
/* I/O dispatch routines | |
17775606 RBDCS dummy csr to trigger sysgen | |
*/ | |
t_stat rb_rd16 (int32 *data, int32 PA, int32 access) | |
{ | |
*data = 0; | |
return SCPE_OK; | |
} | |
t_stat rb_wr16 (int32 data, int32 PA, int32 access) | |
{ | |
return SCPE_OK; | |
} | |
t_stat rb_rd32 (int32 *data, int32 PA, int32 access) | |
{ | |
UNIT *uptr; | |
switch ((PA >> 2) & 07) { | |
case 0: /* RBCS */ | |
if (rbcs & RBCS_ALLERR) | |
rbcs = rbcs | RBCS_ERR; | |
uptr = rb_dev.units + GET_DRIVE (rbcs); | |
if ((sim_is_active (uptr)) || (uptr->flags & UNIT_DIS)) | |
rbcs = rbcs & ~RBCS_DRDY; | |
else rbcs = rbcs | RBCS_DRDY; /* see if ready */ | |
if (uptr->flags & UNIT_RB80) | |
rbcs = rbcs | RBCS_R80; | |
else rbcs = rbcs & ~RBCS_R80; | |
*data = rbcs; | |
break; | |
case 1: /* RBBA */ | |
*data = rbba & RBBA_RW; | |
break; | |
case 2: /* RBBC */ | |
*data = rbbc; | |
break; | |
case 3: /* RBDA */ | |
*data = rbda; | |
break; | |
case 4: /* RBMP */ | |
*data = rbmp; | |
rbmp = rbmp1; /* ripple data */ | |
rbmp1 = rbmp2; | |
break; | |
case 5: /* ECCPS */ | |
case 6: /* ECCPT */ | |
case 7: /* INIT */ | |
*data = 0; | |
break; | |
} | |
sim_debug(DBG_REG, &rb_dev, "reg %d read, value = %X\n", (PA >> 2) & 07, *data); | |
return SCPE_OK; | |
} | |
t_stat rb_wr32 (int32 data, int32 PA, int32 access) | |
{ | |
UNIT *uptr; | |
sim_debug(DBG_REG, &rb_dev, "reg %d write, value = %X\n", (PA >> 2) & 07, data); | |
switch ((PA >> 2) & 07) { | |
case 0: /* CSR */ | |
if (rbcs & RBCS_ALLERR) | |
rbcs = rbcs | RBCS_ERR; | |
uptr = rb_dev.units + GET_DRIVE (data); | |
if ((sim_is_active (uptr)) || (uptr->flags & UNIT_DIS)) | |
rbcs = rbcs & ~RBCS_DRDY; | |
else rbcs = rbcs | RBCS_DRDY; /* see if ready */ | |
if (uptr->flags & UNIT_RB80) | |
rbcs = rbcs | RBCS_R80; | |
else rbcs = rbcs & ~RBCS_R80; | |
rbcs = rbcs & ~(data & RBCS_C1); | |
rbcs = rbcs & ~(~data & RBCS_C0); | |
rbcs = (rbcs & ~RBCS_RW) | (data & RBCS_RW); | |
if (data & RBCS_ATN) CLR_INT (RB); | |
if ((data & CSR_DONE) || (sim_is_active (uptr))) /* ready set? */ | |
return SCPE_OK; | |
CLR_INT (RB); /* clear interrupt */ | |
rbcs = rbcs & ~RBCS_ALLERR; /* clear errors */ | |
uptr->SIP = 0; | |
if (uptr->flags & UNIT_DIS) { | |
rbcs = rbcs | (1u << (RBCS_V_ATN + GET_DRIVE (rbcs))); | |
rb_set_done (RBCS_ERR | RBCS_INCMP); | |
break; | |
} | |
switch (GET_FUNC (rbcs)) { /* case on RBCS<3:1> */ | |
case RBCS_NOP: /* nop */ | |
rb_set_done (0); | |
break; | |
case RBCS_SEEK: /* seek */ | |
sim_activate (uptr, rb_swait); | |
break; | |
default: /* data transfer */ | |
sim_activate (uptr, rb_cwait); /* activate unit */ | |
break; | |
} /* end switch func */ | |
break; | |
case 1: /* BAR */ | |
rbba = data & RBBA_RW; | |
break; | |
case 2: /* BCR */ | |
rbbc = data; | |
break; | |
case 3: /* DAR */ | |
rbda = data; | |
break; | |
case 4: /* MPR */ | |
rbmp = rbmp1 = rbmp2 = data; | |
break; | |
case 5: /* ECCPS */ | |
case 6: /* ECCPT */ | |
break; | |
case 7: /* INIT */ | |
return rb_reset(&rb_dev); | |
} | |
return SCPE_OK; | |
} | |
/* Service unit timeout | |
If seek in progress, complete seek command | |
Else complete data transfer command | |
The unit control block contains the function and cylinder for | |
the current command. | |
*/ | |
t_stat rb_svc (UNIT *uptr) | |
{ | |
int32 curr, newc, swait; | |
int32 err, wc, maxwc, t; | |
int32 i, func, da, awc; | |
uint32 ma; | |
uint16 comp; | |
func = GET_FUNC (rbcs); /* get function */ | |
if (func == RBCS_GSTA) { /* get status */ | |
sim_debug(DBG_CMD, &rb_dev, "Get Status\n"); | |
if (uptr->flags & UNIT_RB80) { | |
rbmp = uptr->STAT | RB80DS_PLV; | |
if (uptr->flags & UNIT_ATT) | |
rbmp = rbmp | RB80DS_RDY | RB80DS_OCY; | |
if (uptr->flags & UNIT_WPRT) | |
rbmp = rbmp | RB80DS_WLK; | |
} | |
else { | |
if (rbmp & RBMP_RST) | |
uptr->STAT = uptr->STAT & ~RB02DS_ERR; | |
rbmp = uptr->STAT | (uptr->flags & UNIT_ATT)? RB02DS_ATT: RB02DS_UNATT; | |
if (uptr->flags & UNIT_WPRT) | |
rbmp = rbmp | RB02DS_WLK; | |
} | |
rbmp2 = rbmp1 = rbmp; | |
rb_set_done (0); /* done */ | |
return SCPE_OK; | |
} | |
if (func == RBCS_RHDR) { /* read header? */ | |
sim_debug(DBG_CMD, &rb_dev, "Read Header\n"); | |
rbmp = (uptr->TRK & RBDA_TRACK) | GET_SECT (rbda); | |
rbmp1 = rbmp2 = 0; | |
rbcs = rbcs | (1 << (RBCS_V_ATN + GET_DRIVE (rbcs))); | |
rb_set_done (0); /* done */ | |
return SCPE_OK; | |
} | |
if ((uptr->flags & UNIT_ATT) == 0) { /* attached? */ | |
rbcs = rbcs & ~RBCS_DRDY; /* clear drive ready */ | |
rbcs = rbcs | (1u << (RBCS_V_ATN + GET_DRIVE (rbcs))); | |
if ((uptr->flags & UNIT_RB80) == 0) | |
uptr->STAT = uptr->STAT | RB02DS_SPE; /* spin error */ | |
rb_set_done (RBCS_ERR | RBCS_INCMP); /* flag error */ | |
//return IORETURN (rl_stopioe, SCPE_UNATT); | |
return SCPE_OK; | |
} | |
if ((func == RBCS_WRITE) && (uptr->flags & UNIT_WPRT)) { | |
if ((uptr->flags & UNIT_RB80) == 0) | |
uptr->STAT = uptr->STAT | RB02DS_WGE; /* write and locked */ | |
rb_set_done (RBCS_ERR | RBCS_DRE); | |
return SCPE_OK; | |
} | |
if (func == RBCS_SEEK) { /* seek? */ | |
if (uptr->SIP == 0) { | |
sim_debug(DBG_CMD, &rb_dev, "Seek, CYL=%d, TRK=%d, SECT=%d\n", GET_CYL(rbda), GET_TRACK(rbda), GET_SECT(rbda)); | |
uptr->SIP = 1; | |
if ((uint32)rbda == 0xFFFFFFFF) swait = rb_swait; | |
else { | |
curr = GET_CYL (uptr->TRK); /* current cylinder */ | |
newc = GET_CYL (rbda); /* offset */ | |
uptr->TRK = (newc << RBDA_V_CYL); /* put on track */ | |
swait = rb_cwait * abs (newc - curr); | |
if (swait < rb_mwait) swait = rb_mwait; | |
} | |
sim_activate (uptr, swait); | |
rbcs = rbcs | (1 << (RBCS_V_ATN + GET_DRIVE (rbcs))); | |
rbcs = rbcs | RBCS_IRQ; | |
rb_set_done(0); | |
return SCPE_OK; | |
} | |
else { | |
sim_debug(DBG_CMD, &rb_dev, "Seek done\n"); | |
rbcs = rbcs | (1 << (RBCS_V_ATN + GET_DRIVE (rbcs))); | |
uptr->SIP = 0; | |
rb_set_done (0); /* done */ | |
return SCPE_OK; | |
} | |
} | |
if (((func != RBCS_RNOHDR) && ((uptr->TRK & RBDA_CYL) != (rbda & RBDA_CYL))) | |
|| (GET_SECT (rbda) >= RB_NUMSC(uptr))) { /* bad cyl or sector? */ | |
sim_debug(DBG_CMD, &rb_dev, "Invalid cylinder or sector, CYL=%d, TRK=%d, SECT=%d\n", GET_CYL(rbda), GET_TRACK(rbda), GET_SECT(rbda)); | |
rb_set_done (RBCS_ERR | RBCS_HDE | RBCS_INCMP); /* wrong cylinder? */ | |
return SCPE_OK; | |
} | |
ma = rbba; /* get mem addr */ | |
da = GET_DA (rbda, uptr); /* get disk addr */ | |
wc = ((rbbc * -1) >> 1); /* get true wc */ | |
maxwc = (RB_NUMSC(uptr) - GET_SECT (rbda)) * RB_NUMWD(uptr); /* max transfer */ | |
if (wc > maxwc) /* track overrun? */ | |
wc = maxwc; | |
err = sim_fseek (uptr->fileref, da * sizeof (int16), SEEK_SET); | |
if ((func >= RBCS_READ) && (err == 0)) { /* read (no hdr)? */ | |
sim_debug(DBG_CMD, &rb_dev, "Read, CYL=%d, TRK=%d, SECT=%d, WC=%d, DA=%d\n", GET_CYL(rbda), GET_TRACK(rbda), GET_SECT(rbda), wc, da); | |
i = sim_fread (rbxb, sizeof (uint16), wc, uptr->fileref); | |
err = ferror (uptr->fileref); | |
for ( ; i < wc; i++) /* fill buffer */ | |
rbxb[i] = 0; | |
if ((t = Map_WriteW (ma, wc << 1, rbxb))) { /* store buffer */ | |
rbcs = rbcs | RBCS_ERR | RBCS_NXM; /* nxm */ | |
wc = wc - t; /* adjust wc */ | |
} | |
} /* end read */ | |
if ((func == RBCS_WRITE) && (err == 0)) { /* write? */ | |
sim_debug(DBG_CMD, &rb_dev, "Write, CYL=%d, TRK=%d, SECT=%d, WC=%d, DA=%d\n", GET_CYL(rbda), GET_TRACK(rbda), GET_SECT(rbda), wc, da); | |
if ((t = Map_ReadW (ma, wc << 1, rbxb))) { /* fetch buffer */ | |
rbcs = rbcs | RBCS_ERR | RBCS_NXM; /* nxm */ | |
wc = wc - t; /* adj xfer lnt */ | |
} | |
if (wc) { /* any xfer? */ | |
awc = (wc + (RB_NUMWD(uptr) - 1)) & ~(RB_NUMWD(uptr) - 1); /* clr to */ | |
for (i = wc; i < awc; i++) /* end of blk */ | |
rbxb[i] = 0; | |
sim_fwrite (rbxb, sizeof (uint16), awc, uptr->fileref); | |
err = ferror (uptr->fileref); | |
} | |
} /* end write */ | |
if ((func == RBCS_WCHK) && (err == 0)) { /* write check? */ | |
sim_debug(DBG_CMD, &rb_dev, "WCheck, CYL=%d, TRK=%d, SECT=%d, WC=%d, DA=%d\n", GET_CYL(rbda), GET_TRACK(rbda), GET_SECT(rbda), wc, da); | |
i = sim_fread (rbxb, sizeof (uint16), wc, uptr->fileref); | |
err = ferror (uptr->fileref); | |
for ( ; i < wc; i++) /* fill buffer */ | |
rbxb[i] = 0; | |
awc = wc; /* save wc */ | |
for (wc = 0; (err == 0) && (wc < awc); wc++) { /* loop thru buf */ | |
if (Map_ReadW (ma + (wc << 1), 2, &comp)) { /* mem wd */ | |
rbcs = rbcs | RBCS_ERR | RBCS_NXM; /* nxm */ | |
break; | |
} | |
if (comp != rbxb[wc]) /* check to buf */ | |
rbcs = rbcs | RBCS_ERR | RBCS_CRC; | |
} /* end for */ | |
} /* end wcheck */ | |
rbbc = (rbbc + (wc << 1)); /* final byte count */ | |
if (rbbc != 0) { /* completed? */ | |
rbcs = rbcs | RBCS_ERR | RBCS_INCMP; | |
} | |
ma = ma + (wc << 1); /* final byte addr */ | |
rbba = ma & RBBA_RW; | |
rbda = rbda + ((wc + (RB_NUMWD(uptr) - 1)) / RB_NUMWD(uptr)); | |
rb_set_done (0); | |
if (err != 0) { /* error? */ | |
perror ("RB I/O error"); | |
clearerr (uptr->fileref); | |
return SCPE_IOERR; | |
} | |
return SCPE_OK; | |
} | |
/* Set done and possibly errors */ | |
void rb_set_done (int32 status) | |
{ | |
rbcs = rbcs | status | CSR_DONE; /* set done */ | |
rbcs = rbcs | RBCS_IRQ; | |
if (rbcs & CSR_IE) { | |
sim_debug(DBG_CMD, &rb_dev, "Done, INT\n"); | |
SET_INT (RB); | |
} | |
else { | |
sim_debug(DBG_CMD, &rb_dev, "Done, no INT\n"); | |
CLR_INT (RB); | |
} | |
return; | |
} | |
/* Device reset */ | |
t_stat rb_reset (DEVICE *dptr) | |
{ | |
int32 i; | |
UNIT *uptr; | |
rbcs = CSR_DONE; | |
rbda = rbba = rbbc = rbmp = 0; | |
CLR_INT (RB); | |
for (i = 0; i < RB_NUMDR; i++) { | |
uptr = rb_dev.units + i; | |
sim_cancel (uptr); | |
uptr->STAT = 0; | |
uptr->SIP = 0; | |
} | |
if (rbxb == NULL) | |
rbxb = (uint16 *) calloc (RB_MAXFR, sizeof (uint16)); | |
if (rbxb == NULL) | |
return SCPE_MEM; | |
return SCPE_OK; | |
} | |
/* Attach routine */ | |
t_stat rb_attach (UNIT *uptr, char *cptr) | |
{ | |
uint32 p; | |
t_stat r; | |
uptr->capac = (uptr->flags & UNIT_RB80)? RB80_SIZE: RB02_SIZE; | |
r = attach_unit (uptr, cptr); /* attach unit */ | |
if (r != SCPE_OK) /* error? */ | |
return r; | |
uptr->TRK = 0; /* cylinder 0 */ | |
if ((uptr->flags & UNIT_RB80) == 0) | |
uptr->STAT = RB02DS_VCK; /* new volume */ | |
if ((p = sim_fsize (uptr->fileref)) == 0) { /* new disk image? */ | |
if (uptr->flags & UNIT_RO) /* if ro, done */ | |
return SCPE_OK; | |
return pdp11_bad_block (uptr, RB_NUMSC(uptr), RB_NUMWD(uptr)); | |
} | |
return SCPE_OK; | |
} | |
/* Set size routine */ | |
t_stat rb_set_size (UNIT *uptr, int32 val, char *cptr, void *desc) | |
{ | |
if (uptr->flags & UNIT_ATT) | |
return SCPE_ALATT; | |
uptr->capac = (val & UNIT_RB80)? RB80_SIZE: RB02_SIZE; | |
return SCPE_OK; | |
} | |
/* Set bad block routine */ | |
t_stat rb_set_bad (UNIT *uptr, int32 val, char *cptr, void *desc) | |
{ | |
return pdp11_bad_block (uptr, RB_NUMSC(uptr), RB_NUMWD(uptr)); | |
} |