/* scp.c: simulator control program | |
Copyright (c) 1993-2012, Robert M Supnik | |
Permission is hereby granted, free of charge, to any person obtaining a | |
copy of this software and associated documentation files (the "Software"), | |
to deal in the Software without restriction, including without limitation | |
the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
and/or sell copies of the Software, and to permit persons to whom the | |
Software is furnished to do so, subject to the following conditions: | |
The above copyright notice and this permission notice shall be included in | |
all copies or substantial portions of the Software. | |
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
Except as contained in this notice, the name of Robert M Supnik shall not be | |
used in advertising or otherwise to promote the sale, use or other dealings | |
in this Software without prior written authorization from Robert M Supnik. | |
20-Mar-12 MP Fixes to "SHOW <x> SHOW" commands | |
06-Jan-12 JDB Fixed "SHOW DEVICE" with only one enabled unit (Dave Bryan) | |
25-Sep-11 MP Added the ability for a simulator built with | |
SIM_ASYNCH_IO to change whether I/O is actually done | |
asynchronously by the new scp command SET ASYNCH and | |
SET NOASYNCH | |
22-Sep-11 MP Added signal catching of SIGHUP and SIGTERM to cause | |
simulator STOP. This allows an externally signalled | |
event (i.e. system shutdown, or logoff) to signal a | |
running simulator of these events and to allow | |
reasonable actions to be taken. This will facilitate | |
running a simulator as a 'service' on *nix platforms, | |
given a sufficiently flexible simulator .ini file. | |
20-Apr-11 MP Added expansion of %STATUS% and %TSTATUS% in do command | |
arguments. STATUS is the numeric value of the last | |
command error status and TSTATUS is the text message | |
relating to the last command error status | |
17-Apr-11 MP Changed sim_rest to defer attaching devices until after | |
device register contents have been restored since some | |
attach activities may reference register contained info. | |
29-Jan-11 MP Adjusted sim_debug to: | |
- include the simulator timestamp (sim_gtime) | |
as part of the prefix for each line of output | |
- write complete lines at a time (avoid asynch I/O issues). | |
05-Jan-11 MP Added Asynch I/O support | |
22-Jan-11 MP Added SET ON, SET NOON, ON, GOTO and RETURN command support | |
13-Jan-11 MP Added "SHOW SHOW" and "SHOW <dev> SHOW" commands | |
05-Jan-11 RMS Fixed bug in deposit stride for numeric input (John Dundas) | |
23-Dec-10 RMS Clarified some help messages (Mark Pizzolato) | |
08-Nov-10 RMS Fixed handling of DO with no arguments (Dave Bryan) | |
22-May-10 RMS Added *nix READLINE support (Mark Pizzolato) | |
08-Feb-09 RMS Fixed warnings in help printouts | |
29-Dec-08 RMS Fixed implementation of MTAB_NC | |
24-Nov-08 RMS Revised RESTORE unit logic for consistency | |
05-Sep-08 JDB "detach_all" ignores error status returns if shutting down | |
17-Aug-08 RMS Revert RUN/BOOT to standard, rather than powerup, reset | |
25-Jul-08 JDB DO cmd missing params now default to null string | |
29-Jun-08 JDB DO cmd sub_args now allows "\\" to specify literal backslash | |
04-Jun-08 JDB label the patch delta more clearly | |
31-Mar-08 RMS Fixed bug in local/global register search (Mark Pizzolato) | |
Fixed bug in restore of RO units (Mark Pizzolato) | |
06-Feb-08 RMS Added SET/SHO/NO BR with default argument | |
18-Jul-07 RMS Modified match_ext for VMS ext;version support | |
28-Apr-07 RMS Modified sim_instr invocation to call sim_rtcn_init_all | |
Fixed bug in get_sim_opt | |
Fixed bug in restoration with changed memory size | |
08-Mar-07 JDB Fixed breakpoint actions in DO command file processing | |
30-Jan-07 RMS Fixed bugs in get_ipaddr | |
17-Oct-06 RMS Added idle support | |
04-Oct-06 JDB DO cmd failure now echoes cmd unless -q | |
30-Aug-06 JDB detach_unit returns SCPE_UNATT if not attached | |
14-Jul-06 RMS Added sim_activate_abs | |
02-Jun-06 JDB Fixed do_cmd to exit nested files on assertion failure | |
Added -E switch to do_cmd to exit on any error | |
14-Feb-06 RMS Upgraded save file format to V3.5 | |
18-Jan-06 RMS Added fprint_stopped_gen | |
Added breakpoint spaces | |
Fixed unaligned register access (Doug Carman) | |
22-Sep-05 RMS Fixed declarations (Sterling Garwood) | |
30-Aug-05 RMS Revised to trim trailing spaces on file names | |
25-Aug-05 RMS Added variable default device support | |
23-Aug-05 RMS Added Linux line history support | |
16-Aug-05 RMS Fixed C++ declaration and cast problems | |
01-May-05 RMS Revised syntax for SET DEBUG (Dave Bryan) | |
22-Mar-05 JDB Modified DO command to allow ten-level nesting | |
18-Mar-05 RMS Moved DETACH tests into detach_unit (Dave Bryan) | |
Revised interface to fprint_sym, fparse_sym | |
13-Mar-05 JDB ASSERT now requires a conditional operator | |
07-Feb-05 RMS Added ASSERT command (Dave Bryan) | |
02-Feb-05 RMS Fixed bug in global register search | |
26-Dec-04 RMS Qualified SAVE examine, RESTORE deposit with SIM_SW_REST | |
10-Nov-04 JDB Fixed logging of errors from cmds in "do" file | |
05-Nov-04 RMS Moved SET/SHOW DEBUG under CONSOLE hierarchy | |
Renamed unit OFFLINE/ONLINE to DISABLED/ENABLED (Dave Bryan) | |
Revised to flush output files after simulation stop (Dave Bryan) | |
15-Oct-04 RMS Fixed HELP to suppress duplicate descriptions | |
27-Sep-04 RMS Fixed comma-separation options in set (David Bryan) | |
09-Sep-04 RMS Added -p option for RESET | |
13-Aug-04 RMS Qualified RESTORE detach with SIM_SW_REST | |
17-Jul-04 JDB DO cmd file open failure retries with ".sim" appended | |
17-Jul-04 RMS Added ECHO command (Dave Bryan) | |
12-Jul-04 RMS Fixed problem ATTACHing to read only files | |
(John Dundas) | |
28-May-04 RMS Added SET/SHOW CONSOLE | |
14-Feb-04 RMS Updated SAVE/RESTORE (V3.2) | |
RMS Added debug print routines (Dave Hittner) | |
RMS Added sim_vm_parse_addr and sim_vm_fprint_addr | |
RMS Added REG_VMAD support | |
RMS Split out libraries | |
RMS Moved logging function to SCP | |
RMS Exposed step counter interface(s) | |
RMS Fixed double logging of SHOW BREAK (Mark Pizzolato) | |
RMS Fixed implementation of REG_VMIO | |
RMS Added SET/SHOW DEBUG, SET/SHOW <device> DEBUG, | |
SHOW <device> MODIFIERS, SHOW <device> RADIX | |
RMS Changed sim_fsize to take uptr argument | |
29-Dec-03 RMS Added Telnet console output stall support | |
01-Nov-03 RMS Cleaned up implicit detach on attach/restore | |
Fixed bug in command line read while logging (Mark Pizzolato) | |
01-Sep-03 RMS Fixed end-of-file problem in dep, idep | |
Fixed error on trailing spaces in dep, idep | |
15-Jul-03 RMS Removed unnecessary test in reset_all | |
15-Jun-03 RMS Added register flag REG_VMIO | |
25-Apr-03 RMS Added extended address support (V3.0) | |
Fixed bug in SAVE (Peter Schorn) | |
Added u5, u6 fields | |
Added logical name support | |
03-Mar-03 RMS Added sim_fsize | |
27-Feb-03 RMS Fixed bug in multiword deposits to files | |
08-Feb-03 RMS Changed sim_os_sleep to void, match_ext to char* | |
Added multiple actions, .ini file support | |
Added multiple switch evaluations per line | |
07-Feb-03 RMS Added VMS support for ! (Mark Pizzolato) | |
01-Feb-03 RMS Added breakpoint table extension, actions | |
14-Jan-03 RMS Added missing function prototypes | |
10-Jan-03 RMS Added attach/restore flag, dynamic memory size support, | |
case sensitive SET options | |
22-Dec-02 RMS Added ! (OS command) feature (Mark Pizzolato) | |
17-Dec-02 RMS Added get_ipaddr | |
02-Dec-02 RMS Added EValuate command | |
16-Nov-02 RMS Fixed bug in register name match algorithm | |
13-Oct-02 RMS Fixed Borland compiler warnings (Hans Pufal) | |
05-Oct-02 RMS Fixed bugs in set_logon, ssh_break (David Hittner) | |
Added support for fixed buffer devices | |
Added support for Telnet console, removed VT support | |
Added help <command> | |
Added VMS file optimizations (Robert Alan Byer) | |
Added quiet mode, DO with parameters, GUI interface, | |
extensible commands (Brian Knittel) | |
Added device enable/disable commands | |
14-Jul-02 RMS Fixed exit bug in do, added -v switch (Brian Knittel) | |
17-May-02 RMS Fixed bug in fxread/fxwrite error usage (found by | |
Norm Lastovic) | |
02-May-02 RMS Added VT emulation interface, changed {NO}LOG to SET {NO}LOG | |
22-Apr-02 RMS Fixed laptop sleep problem in clock calibration, added | |
magtape record length error (Jonathan Engdahl) | |
26-Feb-02 RMS Fixed initialization bugs in do_cmd, get_aval | |
(Brian Knittel) | |
10-Feb-02 RMS Fixed problem in clock calibration | |
06-Jan-02 RMS Moved device enable/disable to simulators | |
30-Dec-01 RMS Generalized timer packaged, added circular arrays | |
19-Dec-01 RMS Fixed DO command bug (John Dundas) | |
07-Dec-01 RMS Implemented breakpoint package | |
05-Dec-01 RMS Fixed bug in universal register logic | |
03-Dec-01 RMS Added read-only units, extended SET/SHOW, universal registers | |
24-Nov-01 RMS Added unit-based registers | |
16-Nov-01 RMS Added DO command | |
28-Oct-01 RMS Added relative range addressing | |
08-Oct-01 RMS Added SHOW VERSION | |
30-Sep-01 RMS Relaxed attach test in BOOT | |
27-Sep-01 RMS Added queue count routine, fixed typo in ex/mod | |
17-Sep-01 RMS Removed multiple console support | |
07-Sep-01 RMS Removed conditional externs on function prototypes | |
Added special modifier print | |
31-Aug-01 RMS Changed int64 to t_int64 for Windoze (V2.7) | |
18-Jul-01 RMS Minor changes for Macintosh port | |
12-Jun-01 RMS Fixed bug in big-endian I/O (Dave Conroy) | |
27-May-01 RMS Added multiple console support | |
16-May-01 RMS Added logging | |
15-May-01 RMS Added features from Tim Litt | |
12-May-01 RMS Fixed missing return in disable_cmd | |
25-Mar-01 RMS Added ENABLE/DISABLE | |
14-Mar-01 RMS Revised LOAD/DUMP interface (again) | |
05-Mar-01 RMS Added clock calibration support | |
05-Feb-01 RMS Fixed bug, DETACH buffered unit with hwmark = 0 | |
04-Feb-01 RMS Fixed bug, RESTORE not using device's attach routine | |
21-Jan-01 RMS Added relative time | |
22-Dec-00 RMS Fixed find_device for devices ending in numbers | |
08-Dec-00 RMS V2.5a changes | |
30-Oct-00 RMS Added output file option to examine | |
11-Jul-99 RMS V2.5 changes | |
13-Apr-99 RMS Fixed handling of 32b addresses | |
04-Oct-98 RMS V2.4 changes | |
20-Aug-98 RMS Added radix commands | |
05-Jun-98 RMS Fixed bug in ^D handling for UNIX | |
10-Apr-98 RMS Added switches to all commands | |
26-Oct-97 RMS Added search capability | |
25-Jan-97 RMS Revised data types | |
23-Jan-97 RMS Added bi-endian I/O | |
06-Sep-96 RMS Fixed bug in variable length IEXAMINE | |
16-Jun-96 RMS Changed interface to parse/print_sym | |
06-Apr-96 RMS Added error checking in reset all | |
07-Jan-96 RMS Added register buffers in save/restore | |
11-Dec-95 RMS Fixed ordering bug in save/restore | |
22-May-95 RMS Added symbolic input | |
13-Apr-95 RMS Added symbolic printouts | |
*/ | |
/* Macros and data structures */ | |
#define NOT_MUX_USING_CODE /* sim_tmxr library provider or agnostic */ | |
#include "sim_defs.h" | |
#include "sim_rev.h" | |
#include "sim_disk.h" | |
#include "sim_tape.h" | |
#include "sim_ether.h" | |
#include "sim_serial.h" | |
#include "sim_video.h" | |
#include "sim_sock.h" | |
#include <signal.h> | |
#include <ctype.h> | |
#include <time.h> | |
#if defined(_WIN32) | |
#include <direct.h> | |
#else | |
#include <unistd.h> | |
#endif | |
#include <sys/stat.h> | |
#if defined(HAVE_DLOPEN) /* Dynamic Readline support */ | |
#include <dlfcn.h> | |
#endif | |
#define EX_D 0 /* deposit */ | |
#define EX_E 1 /* examine */ | |
#define EX_I 2 /* interactive */ | |
#define SCH_OR 0 /* search logicals */ | |
#define SCH_AND 1 | |
#define SCH_XOR 2 | |
#define SCH_E 0 /* search booleans */ | |
#define SCH_N 1 | |
#define SCH_G 2 | |
#define SCH_L 3 | |
#define SCH_EE 4 | |
#define SCH_NE 5 | |
#define SCH_GE 6 | |
#define SCH_LE 7 | |
#define SSH_ST 0 /* set */ | |
#define SSH_SH 1 /* show */ | |
#define SSH_CL 2 /* clear */ | |
#define MAX_DO_NEST_LVL 20 /* DO cmd nesting level */ | |
#define SRBSIZ 1024 /* save/restore buffer */ | |
#define SIM_BRK_INILNT 4096 /* bpt tbl length */ | |
#define SIM_BRK_ALLTYP 0xFFFFFFFF | |
#define UPDATE_SIM_TIME \ | |
if (1) { \ | |
int32 _x; \ | |
AIO_LOCK; \ | |
if (sim_clock_queue == QUEUE_LIST_END) \ | |
_x = noqueue_time; \ | |
else \ | |
_x = sim_clock_queue->time; \ | |
sim_time = sim_time + (_x - sim_interval); \ | |
sim_rtime = sim_rtime + ((uint32) (_x - sim_interval)); \ | |
if (sim_clock_queue == QUEUE_LIST_END) \ | |
noqueue_time = sim_interval; \ | |
else \ | |
sim_clock_queue->time = sim_interval; \ | |
AIO_UNLOCK; \ | |
} \ | |
else \ | |
(void)0 \ | |
#define SZ_D(dp) (size_map[((dp)->dwidth + CHAR_BIT - 1) / CHAR_BIT]) | |
#define SZ_R(rp) \ | |
(size_map[((rp)->width + (rp)->offset + CHAR_BIT - 1) / CHAR_BIT]) | |
#if defined (USE_INT64) | |
#define SZ_LOAD(sz,v,mb,j) \ | |
if (sz == sizeof (uint8)) v = *(((uint8 *) mb) + ((uint32) j)); \ | |
else if (sz == sizeof (uint16)) v = *(((uint16 *) mb) + ((uint32) j)); \ | |
else if (sz == sizeof (uint32)) v = *(((uint32 *) mb) + ((uint32) j)); \ | |
else v = *(((t_uint64 *) mb) + ((uint32) j)); | |
#define SZ_STORE(sz,v,mb,j) \ | |
if (sz == sizeof (uint8)) *(((uint8 *) mb) + j) = (uint8) v; \ | |
else if (sz == sizeof (uint16)) *(((uint16 *) mb) + ((uint32) j)) = (uint16) v; \ | |
else if (sz == sizeof (uint32)) *(((uint32 *) mb) + ((uint32) j)) = (uint32) v; \ | |
else *(((t_uint64 *) mb) + ((uint32) j)) = v; | |
#else | |
#define SZ_LOAD(sz,v,mb,j) \ | |
if (sz == sizeof (uint8)) v = *(((uint8 *) mb) + ((uint32) j)); \ | |
else if (sz == sizeof (uint16)) v = *(((uint16 *) mb) + ((uint32) j)); \ | |
else v = *(((uint32 *) mb) + ((uint32) j)); | |
#define SZ_STORE(sz,v,mb,j) \ | |
if (sz == sizeof (uint8)) *(((uint8 *) mb) + ((uint32) j)) = (uint8) v; \ | |
else if (sz == sizeof (uint16)) *(((uint16 *) mb) + ((uint32) j)) = (uint16) v; \ | |
else *(((uint32 *) mb) + ((uint32) j)) = v; | |
#endif | |
#define GET_SWITCHES(cp) \ | |
if ((cp = get_sim_sw (cp)) == NULL) return SCPE_INVSW | |
#define GET_RADIX(val,dft) \ | |
if (sim_switches & SWMASK ('O')) val = 8; \ | |
else if (sim_switches & SWMASK ('D')) val = 10; \ | |
else if (sim_switches & SWMASK ('H')) val = 16; \ | |
else val = dft; | |
/* Asynch I/O support */ | |
#if defined (SIM_ASYNCH_IO) | |
pthread_mutex_t sim_asynch_lock = PTHREAD_MUTEX_INITIALIZER; | |
pthread_cond_t sim_asynch_wake = PTHREAD_COND_INITIALIZER; | |
pthread_mutex_t sim_timer_lock = PTHREAD_MUTEX_INITIALIZER; | |
pthread_cond_t sim_timer_wake = PTHREAD_COND_INITIALIZER; | |
pthread_mutex_t sim_tmxr_poll_lock = PTHREAD_MUTEX_INITIALIZER; | |
pthread_cond_t sim_tmxr_poll_cond = PTHREAD_COND_INITIALIZER; | |
int32 sim_tmxr_poll_count; | |
pthread_t sim_asynch_main_threadid; | |
UNIT * volatile sim_asynch_queue; | |
UNIT * volatile sim_wallclock_queue; | |
UNIT * volatile sim_wallclock_entry; | |
UNIT * volatile sim_clock_cosched_queue; | |
t_bool sim_asynch_enabled = TRUE; | |
int32 sim_asynch_check; | |
int32 sim_asynch_latency = 4000; /* 4 usec interrupt latency */ | |
int32 sim_asynch_inst_latency = 20; /* assume 5 mip simulator */ | |
#else | |
t_bool sim_asynch_enabled = FALSE; | |
#endif | |
/* The per-simulator init routine is a weak global that defaults to NULL | |
The other per-simulator pointers can be overrriden by the init routine */ | |
void (*sim_vm_init) (void); | |
char* (*sim_vm_read) (char *ptr, int32 size, FILE *stream) = NULL; | |
void (*sim_vm_post) (t_bool from_scp) = NULL; | |
CTAB *sim_vm_cmd = NULL; | |
void (*sim_vm_fprint_addr) (FILE *st, DEVICE *dptr, t_addr addr) = NULL; | |
t_addr (*sim_vm_parse_addr) (DEVICE *dptr, char *cptr, char **tptr) = NULL; | |
/* Prototypes */ | |
/* Set and show command processors */ | |
t_stat set_dev_radix (DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat set_dev_enbdis (DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat set_dev_debug (DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat set_unit_enbdis (DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat ssh_break (FILE *st, char *cptr, int32 flg); | |
t_stat show_cmd_fi (FILE *ofile, int32 flag, char *cptr); | |
t_stat show_config (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_queue (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_time (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_mod_names (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_show_commands (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_log_names (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_dev_radix (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_dev_debug (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_dev_logicals (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_dev_modifiers (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_dev_show_commands (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_version (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_default (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_break (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_on (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
t_stat show_device (FILE *st, DEVICE *dptr, int32 flag); | |
t_stat show_unit (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag); | |
t_stat show_all_mods (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flg, int32 *toks); | |
t_stat show_one_mod (FILE *st, DEVICE *dptr, UNIT *uptr, MTAB *mptr, char *cptr, int32 flag); | |
t_stat sim_check_console (int32 sec); | |
t_stat sim_save (FILE *sfile); | |
t_stat sim_rest (FILE *rfile); | |
/* Breakpoint package */ | |
t_stat sim_brk_init (void); | |
t_stat sim_brk_set (t_addr loc, int32 sw, int32 ncnt, char *act); | |
t_stat sim_brk_clr (t_addr loc, int32 sw); | |
t_stat sim_brk_clrall (int32 sw); | |
t_stat sim_brk_show (FILE *st, t_addr loc, int32 sw); | |
t_stat sim_brk_showall (FILE *st, int32 sw); | |
char *sim_brk_getact (char *buf, int32 size); | |
void sim_brk_clract (void); | |
void sim_brk_npc (uint32 cnt); | |
BRKTAB *sim_brk_new (t_addr loc); | |
/* Commands support routines */ | |
SCHTAB *get_search (char *cptr, int32 radix, SCHTAB *schptr); | |
int32 test_search (t_value val, SCHTAB *schptr); | |
static char *get_glyph_gen (char *iptr, char *optr, char mchar, t_bool uc, t_bool quote); | |
int32 get_switches (char *cptr); | |
char *get_sim_sw (char *cptr); | |
t_stat get_aval (t_addr addr, DEVICE *dptr, UNIT *uptr); | |
t_value get_rval (REG *rptr, uint32 idx); | |
void put_rval (REG *rptr, uint32 idx, t_value val); | |
t_value strtotv (const char *inptr, char **endptr, uint32 radix); | |
void fprint_help (FILE *st); | |
void fprint_stopped (FILE *st, t_stat r); | |
void fprint_capac (FILE *st, DEVICE *dptr, UNIT *uptr); | |
void fprint_sep (FILE *st, int32 *tokens); | |
char *read_line (char *ptr, int32 size, FILE *stream); | |
char *read_line_p (char *prompt, char *ptr, int32 size, FILE *stream); | |
REG *find_reg_glob (char *ptr, char **optr, DEVICE **gdptr); | |
char *sim_trim_endspc (char *cptr); | |
/* Forward references */ | |
t_stat scp_attach_unit (DEVICE *dptr, UNIT *uptr, char *cptr); | |
t_stat scp_detach_unit (DEVICE *dptr, UNIT *uptr); | |
t_bool qdisable (DEVICE *dptr); | |
t_stat attach_err (UNIT *uptr, t_stat stat); | |
t_stat detach_all (int32 start_device, t_bool shutdown); | |
t_stat assign_device (DEVICE *dptr, char *cptr); | |
t_stat deassign_device (DEVICE *dptr); | |
t_stat ssh_break_one (FILE *st, int32 flg, t_addr lo, int32 cnt, char *aptr); | |
t_stat run_boot_prep (void); | |
t_stat exdep_reg_loop (FILE *ofile, SCHTAB *schptr, int32 flag, char *cptr, | |
REG *lowr, REG *highr, uint32 lows, uint32 highs); | |
t_stat ex_reg (FILE *ofile, t_value val, int32 flag, REG *rptr, uint32 idx); | |
t_stat dep_reg (int32 flag, char *cptr, REG *rptr, uint32 idx); | |
t_stat exdep_addr_loop (FILE *ofile, SCHTAB *schptr, int32 flag, char *cptr, | |
t_addr low, t_addr high, DEVICE *dptr, UNIT *uptr); | |
t_stat ex_addr (FILE *ofile, int32 flag, t_addr addr, DEVICE *dptr, UNIT *uptr); | |
t_stat dep_addr (int32 flag, char *cptr, t_addr addr, DEVICE *dptr, | |
UNIT *uptr, int32 dfltinc); | |
void fprint_fields (FILE *stream, t_value before, t_value after, BITFIELD* bitdefs); | |
t_stat step_svc (UNIT *ptr); | |
t_stat shift_args (char *do_arg[], size_t arg_count); | |
t_stat set_on (int32 flag, char *cptr); | |
t_stat set_verify (int32 flag, char *cptr); | |
t_stat set_message (int32 flag, char *cptr); | |
t_stat set_quiet (int32 flag, char *cptr); | |
t_stat set_asynch (int32 flag, char *cptr); | |
t_stat do_cmd_label (int32 flag, char *cptr, char *label); | |
void int_handler (int signal); | |
t_stat set_prompt (int32 flag, char *cptr); | |
/* Global data */ | |
DEVICE *sim_dflt_dev = NULL; | |
UNIT *sim_clock_queue = QUEUE_LIST_END; | |
int32 sim_interval = 0; | |
int32 sim_switches = 0; | |
FILE *sim_ofile = NULL; | |
SCHTAB *sim_schptr = FALSE; | |
DEVICE *sim_dfdev = NULL; | |
UNIT *sim_dfunit = NULL; | |
DEVICE **sim_internal_devices = NULL; | |
uint32 sim_internal_device_count = 0; | |
int32 sim_opt_out = 0; | |
int32 sim_is_running = 0; | |
uint32 sim_brk_summ = 0; | |
uint32 sim_brk_types = 0; | |
uint32 sim_brk_dflt = 0; | |
char *sim_brk_act[MAX_DO_NEST_LVL]; | |
BRKTAB *sim_brk_tab = NULL; | |
int32 sim_brk_ent = 0; | |
int32 sim_brk_lnt = 0; | |
int32 sim_brk_ins = 0; | |
t_bool sim_brk_pend[SIM_BKPT_N_SPC] = { FALSE }; | |
t_addr sim_brk_ploc[SIM_BKPT_N_SPC] = { 0 }; | |
int32 sim_quiet = 0; | |
int32 sim_step = 0; | |
static double sim_time; | |
static uint32 sim_rtime; | |
static int32 noqueue_time; | |
volatile int32 stop_cpu = 0; | |
t_value *sim_eval = NULL; | |
FILE *sim_log = NULL; /* log file */ | |
FILEREF *sim_log_ref = NULL; /* log file file reference */ | |
FILE *sim_deb = NULL; /* debug file */ | |
FILEREF *sim_deb_ref = NULL; /* debug file file reference */ | |
int32 sim_deb_switches = 0; /* debug switches */ | |
REG *sim_deb_PC = NULL; /* debug PC register pointer */ | |
struct timespec sim_deb_basetime; /* debug timestamp relative base time */ | |
char *sim_prompt = NULL; /* prompt string */ | |
static FILE *sim_gotofile; /* the currently open do file */ | |
static int32 sim_goto_line[MAX_DO_NEST_LVL+1]; /* the current line number in the currently open do file */ | |
static int32 sim_do_echo = 0; /* the echo status of the currently open do file */ | |
static int32 sim_show_message = 1; /* the message display status of the currently open do file */ | |
static int32 sim_on_inherit = 0; /* the inherit status of on state and conditions when executing do files */ | |
int32 sim_do_depth = 0; | |
static int32 sim_on_check[MAX_DO_NEST_LVL+1]; | |
static char *sim_on_actions[MAX_DO_NEST_LVL+1][SCPE_MAX_ERR+1]; | |
static char sim_do_filename[MAX_DO_NEST_LVL+1][CBUFSIZE]; | |
static char *sim_do_label[MAX_DO_NEST_LVL+1]; | |
static t_stat sim_last_cmd_stat; /* Command Status */ | |
static SCHTAB sim_stab; | |
static UNIT sim_step_unit = { UDATA (&step_svc, 0, 0) }; | |
#if defined USE_INT64 | |
static const char *sim_si64 = "64b data"; | |
#else | |
static const char *sim_si64 = "32b data"; | |
#endif | |
#if defined USE_ADDR64 | |
static const char *sim_sa64 = "64b addresses"; | |
#else | |
static const char *sim_sa64 = "32b addresses"; | |
#endif | |
#if defined (USE_NETWORK) || defined (USE_SHARED) | |
static const char *sim_snet = "Ethernet support"; | |
#else | |
static const char *sim_snet = "no Ethernet"; | |
#endif | |
/* Tables and strings */ | |
const char save_vercur[] = "V3.5"; | |
const char save_ver32[] = "V3.2"; | |
const char save_ver30[] = "V3.0"; | |
const struct scp_error { | |
char *code; | |
char *message; | |
} scp_errors[1+SCPE_MAX_ERR-SCPE_BASE] = | |
{{"NXM", "Address space exceeded"}, | |
{"UNATT", "Unit not attached"}, | |
{"IOERR", "I/O error"}, | |
{"CSUM", "Checksum error"}, | |
{"FMT", "Format error"}, | |
{"NOATT", "Unit not attachable"}, | |
{"OPENERR", "File open error"}, | |
{"MEM", "Memory exhausted"}, | |
{"ARG", "Invalid argument"}, | |
{"STEP", "Step expired"}, | |
{"UNK", "Unknown command"}, | |
{"RO", "Read only argument"}, | |
{"INCOMP", "Command not completed"}, | |
{"STOP", "Simulation stopped"}, | |
{"EXIT", "Goodbye"}, | |
{"TTIERR", "Console input I/O error"}, | |
{"TTOERR", "Console output I/O error"}, | |
{"EOF", "End of file"}, | |
{"REL", "Relocation error"}, | |
{"NOPARAM", "No settable parameters"}, | |
{"ALATT", "Unit already attached"}, | |
{"TIMER", "Hardware timer error"}, | |
{"SIGERR", "SIGINT handler setup error"}, | |
{"TTYERR", "Console terminal setup error"}, | |
{"SUB", "Subscript out of range"}, | |
{"NOFNC", "Command not allowed"}, | |
{"UDIS", "Unit disabled"}, | |
{"NORO", "Read only operation not allowed"}, | |
{"INVSW", "Invalid switch"}, | |
{"MISVAL", "Missing value"}, | |
{"2FARG", "Too few arguments"}, | |
{"2MARG", "Too many arguments"}, | |
{"NXDEV", "Non-existent device"}, | |
{"NXUN", "Non-existent unit"}, | |
{"NXREG", "Non-existent register"}, | |
{"NXPAR", "Non-existent parameter"}, | |
{"NEST", "Nested DO command limit exceeded"}, | |
{"IERR", "Internal error"}, | |
{"MTRLNT", "Invalid magtape record length"}, | |
{"LOST", "Console Telnet connection lost"}, | |
{"TTMO", "Console Telnet connection timed out"}, | |
{"STALL", "Console Telnet output stall"}, | |
{"AFAIL", "Assertion failed"}, | |
{"INVREM", "Invalid remote console command"}, | |
}; | |
const size_t size_map[] = { sizeof (int8), | |
sizeof (int8), sizeof (int16), sizeof (int32), sizeof (int32) | |
#if defined (USE_INT64) | |
, sizeof (t_int64), sizeof (t_int64), sizeof (t_int64), sizeof (t_int64) | |
#endif | |
}; | |
const t_value width_mask[] = { 0, | |
0x1, 0x3, 0x7, 0xF, | |
0x1F, 0x3F, 0x7F, 0xFF, | |
0x1FF, 0x3FF, 0x7FF, 0xFFF, | |
0x1FFF, 0x3FFF, 0x7FFF, 0xFFFF, | |
0x1FFFF, 0x3FFFF, 0x7FFFF, 0xFFFFF, | |
0x1FFFFF, 0x3FFFFF, 0x7FFFFF, 0xFFFFFF, | |
0x1FFFFFF, 0x3FFFFFF, 0x7FFFFFF, 0xFFFFFFF, | |
0x1FFFFFFF, 0x3FFFFFFF, 0x7FFFFFFF, 0xFFFFFFFF | |
#if defined (USE_INT64) | |
, 0x1FFFFFFFF, 0x3FFFFFFFF, 0x7FFFFFFFF, 0xFFFFFFFFF, | |
0x1FFFFFFFFF, 0x3FFFFFFFFF, 0x7FFFFFFFFF, 0xFFFFFFFFFF, | |
0x1FFFFFFFFFF, 0x3FFFFFFFFFF, 0x7FFFFFFFFFF, 0xFFFFFFFFFFF, | |
0x1FFFFFFFFFFF, 0x3FFFFFFFFFFF, 0x7FFFFFFFFFFF, 0xFFFFFFFFFFFF, | |
0x1FFFFFFFFFFFF, 0x3FFFFFFFFFFFF, 0x7FFFFFFFFFFFF, 0xFFFFFFFFFFFFF, | |
0x1FFFFFFFFFFFFF, 0x3FFFFFFFFFFFFF, 0x7FFFFFFFFFFFFF, 0xFFFFFFFFFFFFFF, | |
0x1FFFFFFFFFFFFFF, 0x3FFFFFFFFFFFFFF, | |
0x7FFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFF, | |
0x1FFFFFFFFFFFFFFF, 0x3FFFFFFFFFFFFFFF, | |
0x7FFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF | |
#endif | |
}; | |
static CTAB cmd_table[] = { | |
{ "RESET", &reset_cmd, 0, | |
"r{eset} {ALL|<device>} reset simulator\n" }, | |
{ "EXAMINE", &exdep_cmd, EX_E, | |
"e{xamine} <list> examine memory or registers\n" }, | |
{ "IEXAMINE", &exdep_cmd, EX_E+EX_I, | |
"ie{xamine} <list> interactive examine memory or registers\n" }, | |
{ "DEPOSIT", &exdep_cmd, EX_D, | |
"d{eposit} <list> <val> deposit in memory or registers\n" }, | |
{ "IDEPOSIT", &exdep_cmd, EX_D+EX_I, | |
"id{eposit} <list> interactive deposit in memory or registers\n" }, | |
{ "EVALUATE", &eval_cmd, 0, | |
"ev{aluate} <expr> evaluate symbolic expression\n" }, | |
{ "RUN", &run_cmd, RU_RUN, | |
"ru{n} {new PC} reset and start simulation\n", &run_cmd_message }, | |
{ "GO", &run_cmd, RU_GO, | |
"go {new PC} start simulation\n", &run_cmd_message }, | |
{ "STEP", &run_cmd, RU_STEP, | |
"s{tep} {n} simulate n instructions\n", &run_cmd_message }, | |
{ "CONTINUE", &run_cmd, RU_CONT, | |
"c{ont} continue simulation\n", &run_cmd_message }, | |
{ "BOOT", &run_cmd, RU_BOOT, | |
"b{oot} <unit> bootstrap unit\n", &run_cmd_message }, | |
{ "BREAK", &brk_cmd, SSH_ST, | |
"br{eak} <list> set breakpoints\n" }, | |
{ "NOBREAK", &brk_cmd, SSH_CL, | |
"nobr{eak} <list> clear breakpoints\n" }, | |
{ "ATTACH", &attach_cmd, 0, | |
"at{tach} <unit> <file> attach file to simulated unit\n" | |
"h{elp} <dev> attach displays any device specific attach help\n" }, | |
{ "DETACH", &detach_cmd, 0, | |
"det{ach} <unit> detach file from simulated unit\n" }, | |
{ "ASSIGN", &assign_cmd, 0, | |
"as{sign} <device> <name> assign logical name for device\n" }, | |
{ "DEASSIGN", &deassign_cmd, 0, | |
"dea{ssign} <device> deassign logical name for device\n" }, | |
{ "SAVE", &save_cmd, 0, | |
"sa{ve} <file> save simulator to file\n" }, | |
{ "RESTORE", &restore_cmd, 0, | |
"rest{ore}|ge{t} <file> restore simulator from file\n" }, | |
{ "GET", &restore_cmd, 0, NULL }, | |
{ "LOAD", &load_cmd, 0, | |
"l{oad} <file> {<args>} load binary file\n" }, | |
{ "DUMP", &load_cmd, 1, | |
"du(mp) <file> {<args>} dump binary file\n" }, | |
{ "EXIT", &exit_cmd, 0, | |
"exi{t}|q{uit}|by{e} exit from simulation\n" }, | |
{ "QUIT", &exit_cmd, 0, NULL }, | |
{ "BYE", &exit_cmd, 0, NULL }, | |
{ "CD", &set_default_cmd, 0, | |
"cd set the current directory\n" }, | |
{ "PWD", &pwd_cmd, 0, | |
"pwd show current directory\n" }, | |
{ "DIR", &dir_cmd, 0, | |
"dir {dir} list directory files\n" }, | |
{ "LS", &dir_cmd, 0, | |
"ls {dir} list directory files\n" }, | |
{ "SET", &set_cmd, 0, | |
"set console arg{,arg...} set console options\n" | |
"set console WRU specify console drop to simh char\n" | |
"set console BRK specify console Break character\n" | |
"set console DEL specify console delete char\n" | |
"set console PCHAR specify console printable chars\n" | |
"set console TELNET=port specify console telnet port\n" | |
"set console TELNET=LOG=log_file\n" | |
" specify console telnet logging to the\n" | |
" specified destination {LOG,STDOUT,STDERR,DEBUG\n" | |
" or filename)\n" | |
"set console TELNET=NOLOG disables console telnet logging\n" | |
"set console TELNET=BUFFERED[=bufsize]\n" | |
" specify console telnet buffering\n" | |
"set console TELNET=NOBUFFERED\n" | |
" disables console telnet buffering\n" | |
"set console TELNET=UNBUFFERED\n" | |
" disables console telnet buffering\n" | |
"set console NOTELNET disable console telnet\n" | |
"set console SERIAL=serialport[;config]\n" | |
" specify console serial port and optionally\n" | |
" the port config (i.e. ;9600-8n1)\n" | |
"set console NOSERIAL disable console serial session\n" | |
"set console LOG=log_file enable console logging to the\n" | |
" specified destination {STDOUT,STDERR,DEBUG\n" | |
" or filename)\n" | |
"set console NOLOG disable console logging\n" | |
"set remote TELNET=port specify remote console telnet port\n" | |
"set remote NOTELNET disables remote console\n" | |
"set remote CONNECTIONS=n specify number of concurrent remote console sessions\n" | |
"set remote TIMEOUT=n specify number of seconds without input before\n" | |
" automatic continue\n" | |
"set default <dir> set the current directory\n" | |
"set log log_file specify the log destination\n" | |
" (STDOUT,DEBUG or filename)\n" | |
"set nolog disables any currently active logging\n" | |
"set debug debug_file specify the debug destination\n" | |
" (STDOUT,STDERR,LOG or filename)\n" | |
"set nodebug disables any currently active debug output\n" | |
"set break <list> set breakpoints\n" | |
"set nobreak <list> clear breakpoints\n" | |
"set throttle {x{M|K|%}}|{x/t}\n" | |
" set simulation rate\n" | |
"set nothrottle set simulation rate to maximum\n" | |
"set asynch enable asynchronous I/O\n" | |
"set noasynch disable asynchronous I/O\n" | |
"set environment name=val set environment variable\n" | |
"set on enables error checking after command execution\n" | |
"set noon disables error checking after command execution\n" | |
"set on inherit enables inheritance of ON state and actions into do command files\n" | |
"set on noinherit disables inheritance of ON state and actions into do command files\n" | |
"set verify re-enables display of command file processed commands\n" | |
"set verbose re-enables display of command file processed commands\n" | |
"set noverify disables display of command file processed commands\n" | |
"set noverbose disables display of command file processed commands\n" | |
"set message re-enables display of command file error messages\n" | |
"set nomessage disables display of command file error messages\n" | |
"set quiet disables suppression of some output and messages\n" | |
"set noquiet re-enables suppression of some output and messages\n" | |
"set prompt \"string\" sets an alternate simulator prompt string\n" | |
"set <dev> OCT|DEC|HEX set device display radix\n" | |
"set <dev> ENABLED enable device\n" | |
"set <dev> DISABLED disable device\n" | |
"set <dev> DEBUG{=arg} set device debug flags\n" | |
"set <dev> NODEBUG={arg} clear device debug flags\n" | |
"set <dev> arg{,arg...} set device parameters (see show modifiers)\n" | |
"set <unit> ENABLED enable unit\n" | |
"set <unit> DISABLED disable unit\n" | |
"set <unit> arg{,arg...} set unit parameters (see show modifiers)\n" | |
"help <dev> set displays the device specific set commands available\n" }, | |
{ "SHOW", &show_cmd, 0, | |
"sh{ow} br{eak} <list> show breakpoints\n" | |
"sh{ow} con{figuration} show configuration\n" | |
"sh{ow} cons{ole} {arg} show console options\n" | |
"sh{ow} dev{ices} show devices\n" | |
"sh{ow} fea{tures} show system devices with descriptions\n" | |
"sh{ow} m{odifiers} show modifiers for all devices\n" | |
"sh{ow} s{how} show SHOW commands for all devices\n" | |
"sh{ow} n{ames} show logical names\n" | |
"sh{ow} q{ueue} show event queue\n" | |
"sh{ow} ti{me} show simulated time\n" | |
"sh{ow} th{rottle} show simulation rate\n" | |
"sh{ow} a{synch} show asynchronouse I/O state\n" | |
"sh{ow} ve{rsion} show simulator version\n" | |
"sh{ow} def{ault} show current directory\n" | |
"sh{ow} re{mote} show remote console configuration\n" | |
"sh{ow} <dev> RADIX show device display radix\n" | |
"sh{ow} <dev> DEBUG show device debug flags\n" | |
"sh{ow} <dev> MODIFIERS show device modifiers\n" | |
"sh{ow} <dev> NAMES show device logical name\n" | |
"sh{ow} <dev> SHOW show device SHOW commands\n" | |
"sh{ow} <dev> {arg,...} show device parameters\n" | |
"sh{ow} <unit> {arg,...} show unit parameters\n" | |
"sh{ow} ethernet show ethernet devices\n" | |
"sh{ow} serial show serial devices\n" | |
"sh{ow} multiplexer show open multiplexer devices\n" | |
"sh{ow} clocks show calibrated timers\n" | |
"sh{ow} on show on condition actions\n" | |
"h{elp} <dev> show displays the device specific show commands available\n" }, | |
{ "DO", &do_cmd, 1, | |
"do {-V} {-O} {-E} {-Q} <file> {arg,arg...}\n" | |
" process command file\n" }, | |
{ "GOTO", &goto_cmd, 1, | |
"goto <label> goto label in command file\n" }, | |
{ "RETURN", &return_cmd, 0, | |
"return return from command file with last command status\n" | |
"return {-Q} <status> return from command file with specific status\n" }, | |
{ "SHIFT", &shift_cmd, 0, | |
"shift shift the command file's positional parameters\n" }, | |
{ "CALL", &call_cmd, 0, | |
"call transfer control to a labeled subroutine\n" | |
" a command file.\n" }, | |
{ "ON", &on_cmd, 0, | |
"on <condition> <action> perform action(s) after condition\n" | |
"on <condition> clear action for specific condition\n" }, | |
{ "PROCEED", &noop_cmd, 0, | |
"proceed continue command file execution without doing anything\n" }, | |
{ "IGNORE", &noop_cmd, 0, | |
"ignore continue command file execution without doing anything\n" }, | |
{ "ECHO", &echo_cmd, 0, | |
"echo <string> display <string>\n" }, | |
{ "ASSERT", &assert_cmd, 0, | |
"assert {<dev>} <cond> test simulator state against condition\n" }, | |
{ "!", &spawn_cmd, 0, | |
"! execute local command interpreter\n" | |
"! <command> execute local host command\n" }, | |
{ "HELP", &help_cmd, 0, | |
"h{elp} type this message\n" | |
"h{elp} <command> type help for command\n" | |
"h{elp} <dev> type help for device\n" | |
"h{elp} <dev> registers type help for device register variables\n" | |
"h{elp} <dev> attach type help for device specific ATTACH command\n" | |
"h{elp} <dev> set type help for device specific SET commands\n" | |
"h{elp} <dev> show type help for device specific SHOW commands\n" | |
"h{elp} <dev> <command> type help for device specific <command> command\n" }, | |
{ NULL, NULL, 0 } | |
}; | |
#if defined(_WIN32) || defined(__hpux) | |
static | |
int setenv(const char *envname, const char *envval, int overwrite) | |
{ | |
char *envstr = malloc(strlen(envname)+strlen(envval)+2); | |
int r; | |
sprintf(envstr, "%s=%s", envname, envval); | |
#if defined(_WIN32) | |
r = _putenv(envstr); | |
free(envstr); | |
#else | |
r = putenv(envstr); | |
#endif | |
return r; | |
} | |
#endif | |
/* Main command loop */ | |
int main (int argc, char *argv[]) | |
{ | |
char cbuf[4*CBUFSIZE], gbuf[CBUFSIZE], *cptr, *cptr2; | |
char nbuf[PATH_MAX + 7]; | |
int32 i, sw; | |
t_bool lookswitch; | |
t_stat stat, stat_nomessage; | |
CTAB *cmdp; | |
#if defined (__MWERKS__) && defined (macintosh) | |
argc = ccommand (&argv); | |
#endif | |
set_prompt (0, "sim>"); /* start with set standard prompt */ | |
*cbuf = 0; /* init arg buffer */ | |
sim_switches = 0; /* init switches */ | |
lookswitch = TRUE; | |
for (i = 1; i < argc; i++) { /* loop thru args */ | |
if (argv[i] == NULL) /* paranoia */ | |
continue; | |
if ((*argv[i] == '-') && lookswitch) { /* switch? */ | |
if ((sw = get_switches (argv[i])) < 0) { | |
fprintf (stderr, "Invalid switch %s\n", argv[i]); | |
return 0; | |
} | |
sim_switches = sim_switches | sw; | |
} | |
else { | |
if ((strlen (argv[i]) + strlen (cbuf) + 3) >= sizeof(cbuf)) { | |
fprintf (stderr, "Argument string too long\n"); | |
return 0; | |
} | |
if (*cbuf) /* concat args */ | |
strcat (cbuf, " "); | |
sprintf(&cbuf[strlen(cbuf)], "%s%s%s", strchr(argv[i], ' ') ? "\"" : "", argv[i], strchr(argv[i], ' ') ? "\"" : ""); | |
lookswitch = FALSE; /* no more switches */ | |
} | |
} /* end for */ | |
sim_quiet = sim_switches & SWMASK ('Q'); /* -q means quiet */ | |
sim_on_inherit = sim_switches & SWMASK ('O'); /* -o means inherit on state */ | |
sim_init_sock (); /* init socket capabilities */ | |
AIO_INIT; /* init Asynch I/O */ | |
if (sim_vm_init != NULL) /* call once only */ | |
(*sim_vm_init)(); | |
sim_finit (); /* init fio package */ | |
setenv ("SIM_NAME", sim_name, 1); /* Publish simulator name */ | |
stop_cpu = 0; | |
sim_interval = 0; | |
sim_time = sim_rtime = 0; | |
noqueue_time = 0; | |
sim_clock_queue = QUEUE_LIST_END; | |
sim_is_running = 0; | |
sim_log = NULL; | |
if (sim_emax <= 0) | |
sim_emax = 1; | |
sim_timer_init (); | |
if ((stat = sim_ttinit ()) != SCPE_OK) { | |
fprintf (stderr, "Fatal terminal initialization error\n%s\n", | |
sim_error_text (stat)); | |
return 0; | |
} | |
if ((sim_eval = (t_value *) calloc (sim_emax, sizeof (t_value))) == NULL) { | |
fprintf (stderr, "Unable to allocate examine buffer\n"); | |
return 0; | |
}; | |
if ((stat = reset_all_p (0)) != SCPE_OK) { | |
fprintf (stderr, "Fatal simulator initialization error\n%s\n", | |
sim_error_text (stat)); | |
return 0; | |
} | |
if ((stat = sim_brk_init ()) != SCPE_OK) { | |
fprintf (stderr, "Fatal breakpoint table initialization error\n%s\n", | |
sim_error_text (stat)); | |
return 0; | |
} | |
if (!sim_quiet) { | |
printf ("\n"); | |
show_version (stdout, NULL, NULL, 0, NULL); | |
} | |
if (sim_dflt_dev == NULL) /* if no default */ | |
sim_dflt_dev = sim_devices[0]; | |
cptr = getenv("HOME"); | |
if (cptr == NULL) { | |
cptr = getenv("HOMEPATH"); | |
cptr2 = getenv("HOMEDRIVE"); | |
} | |
else | |
cptr2 = NULL; | |
if (cptr && sizeof (nbuf) > strlen (cptr) + strlen ("/simh.ini") + 1) { | |
sprintf(nbuf, "\"%s%s%ssimh.ini\"", cptr2 ? cptr2 : "", cptr, strchr (cptr, '/') ? "/" : "\\"); | |
stat = do_cmd (-1, nbuf) & ~SCPE_NOMESSAGE; /* simh.ini proc cmd file */ | |
} | |
if (stat == SCPE_OPENERR) | |
stat = do_cmd (-1, "simh.ini"); /* simh.ini proc cmd file */ | |
if (*cbuf) /* cmd file arg? */ | |
stat = do_cmd (0, cbuf); /* proc cmd file */ | |
else if (*argv[0]) { /* sim name arg? */ | |
char *np; /* "path.ini" */ | |
nbuf[0] = '"'; /* starting " */ | |
strncpy (nbuf + 1, argv[0], PATH_MAX + 1); /* copy sim name */ | |
if ((np = match_ext (nbuf, "EXE"))) /* remove .exe */ | |
*np = 0; | |
strcat (nbuf, ".ini\""); /* add .ini" */ | |
stat = do_cmd (-1, nbuf); /* proc cmd file */ | |
} | |
stat = SCPE_BARE_STATUS(stat); /* remove possible flag */ | |
while (stat != SCPE_EXIT) { /* in case exit */ | |
if ((cptr = sim_brk_getact (cbuf, sizeof(cbuf)))) /* pending action? */ | |
printf ("%s%s\n", sim_prompt, cptr); /* echo */ | |
else if (sim_vm_read != NULL) { /* sim routine? */ | |
printf ("%s", sim_prompt); /* prompt */ | |
cptr = (*sim_vm_read) (cbuf, sizeof(cbuf), stdin); | |
} | |
else cptr = read_line_p (sim_prompt, cbuf, sizeof(cbuf), stdin);/* read with prmopt*/ | |
if (cptr == NULL) { /* EOF? */ | |
if (sim_ttisatty()) continue; /* ignore tty EOF */ | |
else break; /* otherwise exit */ | |
} | |
if (*cptr == 0) /* ignore blank */ | |
continue; | |
sim_sub_args (cbuf, sizeof(cbuf), argv); | |
if (sim_log) /* log cmd */ | |
fprintf (sim_log, "%s%s\n", sim_prompt, cptr); | |
cptr = get_glyph (cptr, gbuf, 0); /* get command glyph */ | |
sim_switches = 0; /* init switches */ | |
if ((cmdp = find_cmd (gbuf))) /* lookup command */ | |
stat = cmdp->action (cmdp->arg, cptr); /* if found, exec */ | |
else stat = SCPE_UNK; | |
stat_nomessage = stat & SCPE_NOMESSAGE; /* extract possible message supression flag */ | |
stat_nomessage = stat_nomessage || (!sim_show_message);/* Apply global suppression */ | |
stat = SCPE_BARE_STATUS(stat); /* remove possible flag */ | |
sim_last_cmd_stat = stat; /* save command error status */ | |
if (!stat_nomessage) { /* displaying message status? */ | |
if (cmdp && (cmdp->message)) /* special message handler? */ | |
cmdp->message (NULL, stat); /* let it deal with display */ | |
else | |
if (stat >= SCPE_BASE) { /* error? */ | |
printf ("%s\n", sim_error_text (stat)); | |
if (sim_log) | |
fprintf (sim_log, "%s\n", sim_error_text (stat)); | |
} | |
} | |
if (sim_vm_post != NULL) | |
(*sim_vm_post) (TRUE); | |
} /* end while */ | |
detach_all (0, TRUE); /* close files */ | |
sim_set_deboff (0, NULL); /* close debug */ | |
sim_set_logoff (0, NULL); /* close log */ | |
sim_set_notelnet (0, NULL); /* close Telnet */ | |
sim_ttclose (); /* close console */ | |
AIO_CLEANUP; /* Asynch I/O */ | |
sim_cleanup_sock (); /* cleanup sockets */ | |
return 0; | |
} | |
/* Set prompt routine */ | |
t_stat set_prompt (int32 flag, char *cptr) | |
{ | |
char gbuf[CBUFSIZE]; | |
if ((!cptr) || (*cptr == '\0')) | |
return SCPE_ARG; | |
cptr = get_glyph_nc (cptr, gbuf, '"'); /* get quote delimted token */ | |
if (gbuf[0] == '\0') { /* Token started with quote */ | |
gbuf[sizeof (gbuf)-1] = '\0'; | |
strncpy (gbuf, cptr, sizeof (gbuf)-1); | |
cptr = strchr (gbuf, '"'); | |
if (cptr) | |
*cptr = '\0'; | |
} | |
sim_prompt = realloc (sim_prompt, strlen (gbuf) + 2); /* nul terminator and trailing blank */ | |
sprintf (sim_prompt, "%s ", gbuf); | |
return SCPE_OK; | |
} | |
/* Find command routine */ | |
CTAB *find_cmd (char *gbuf) | |
{ | |
CTAB *cmdp = NULL; | |
if (sim_vm_cmd) /* try ext commands */ | |
cmdp = find_ctab (sim_vm_cmd, gbuf); | |
if (cmdp == NULL) /* try regular cmds */ | |
cmdp = find_ctab (cmd_table, gbuf); | |
return cmdp; | |
} | |
/* Exit command */ | |
t_stat exit_cmd (int32 flag, char *cptr) | |
{ | |
return SCPE_EXIT; | |
} | |
/* Help command */ | |
void fprint_help (FILE *st) | |
{ | |
CTAB *cmdp; | |
for (cmdp = sim_vm_cmd; cmdp && (cmdp->name != NULL); cmdp++) { | |
if (cmdp->help) | |
fputs (cmdp->help, st); | |
} | |
for (cmdp = cmd_table; cmdp && (cmdp->name != NULL); cmdp++) { | |
if (cmdp->help && (!sim_vm_cmd || !find_ctab (sim_vm_cmd, cmdp->name))) | |
fputs (cmdp->help, st); | |
} | |
return; | |
} | |
static void fprint_header (FILE *st, t_bool *pdone, char *context) | |
{ | |
if (!*pdone) | |
fprintf (st, "%s", context); | |
*pdone = TRUE; | |
} | |
void fprint_reg_help_ex (FILE *st, DEVICE *dptr, t_bool silent) | |
{ | |
REG *rptr, *trptr; | |
t_bool found = FALSE; | |
t_bool all_unique = TRUE; | |
size_t max_namelen = 0; | |
DEVICE *tdptr; | |
char *tptr; | |
char *namebuf; | |
char rangebuf[32]; | |
if (dptr->registers) | |
for (rptr = dptr->registers; rptr->name != NULL; rptr++) { | |
if (rptr->flags & REG_HIDDEN) | |
continue; | |
if (rptr->depth > 1) | |
sprintf (rangebuf, "[%d:%d]", 0, rptr->depth-1); | |
else | |
strcpy (rangebuf, ""); | |
if (max_namelen < (strlen(rptr->name) + strlen (rangebuf))) | |
max_namelen = strlen(rptr->name) + strlen (rangebuf); | |
found = TRUE; | |
trptr = find_reg_glob (rptr->name, &tptr, &tdptr); | |
if ((trptr == NULL) || (tdptr != dptr)) | |
all_unique = FALSE; | |
} | |
if (!found) { | |
if (!silent) | |
fprintf (st, "No register help is available for the %s device\n", dptr->name); | |
} | |
else { | |
namebuf = calloc (max_namelen + 1, sizeof (*namebuf)); | |
fprintf (st, "\nThe %s device implements these registers:\n\n", dptr->name); | |
for (rptr = dptr->registers; rptr->name != NULL; rptr++) { | |
if (rptr->flags & REG_HIDDEN) | |
continue; | |
if (rptr->depth <= 1) | |
sprintf (namebuf, "%*s", -((int)max_namelen), rptr->name); | |
else { | |
sprintf (rangebuf, "[%d:%d]", 0, rptr->depth-1); | |
sprintf (namebuf, "%s%*s", rptr->name, (int)(strlen(rptr->name))-((int)max_namelen), rangebuf); | |
} | |
if (all_unique) { | |
fprintf (st, " %s %4d %s\n", namebuf, rptr->width, rptr->desc ? rptr->desc : ""); | |
continue; | |
} | |
trptr = find_reg_glob (rptr->name, &tptr, &tdptr); | |
if ((trptr == NULL) || (tdptr != dptr)) | |
fprintf (st, " %s %s %4d %s\n", dptr->name, namebuf, rptr->width, rptr->desc ? rptr->desc : ""); | |
else | |
fprintf (st, " %*s %s %4d %s\n", (int)strlen(dptr->name), "", namebuf, rptr->width, rptr->desc ? rptr->desc : ""); | |
} | |
free (namebuf); | |
} | |
} | |
void fprint_reg_help (FILE *st, DEVICE *dptr) | |
{ | |
fprint_reg_help_ex (st, dptr, TRUE); | |
} | |
void fprint_attach_help_ex (FILE *st, DEVICE *dptr, t_bool silent) | |
{ | |
if (dptr->attach_help) { | |
fprintf (st, "\n%s device attach commands:\n\n", dptr->name); | |
dptr->attach_help (st, dptr, NULL, 0, NULL); | |
return; | |
} | |
if (DEV_TYPE(dptr) == DEV_MUX) { | |
fprintf (st, "\n%s device attach commands:\n\n", dptr->name); | |
tmxr_attach_help (st, dptr, NULL, 0, NULL); | |
return; | |
} | |
if (DEV_TYPE(dptr) == DEV_DISK) { | |
fprintf (st, "\n%s device attach commands:\n\n", dptr->name); | |
sim_disk_attach_help (st, dptr, NULL, 0, NULL); | |
return; | |
} | |
if (DEV_TYPE(dptr) == DEV_TAPE) { | |
fprintf (st, "\n%s device attach commands:\n\n", dptr->name); | |
sim_tape_attach_help (st, dptr, NULL, 0, NULL); | |
return; | |
} | |
if (DEV_TYPE(dptr) == DEV_ETHER) { | |
fprintf (st, "\n%s device attach commands:\n\n", dptr->name); | |
eth_attach_help (st, dptr, NULL, 0, NULL); | |
return; | |
} | |
if (!silent) { | |
fprintf (st, "No ATTACH help is available for the %s device\n", dptr->name); | |
if (dptr->help) | |
dptr->help (st, dptr, NULL, 0, NULL); | |
} | |
} | |
void fprint_set_help_ex (FILE *st, DEVICE *dptr, t_bool silent) | |
{ | |
MTAB *mptr; | |
DEBTAB *dep; | |
t_bool found = FALSE; | |
char buf[CBUFSIZE], header[CBUFSIZE]; | |
sprintf (header, "\n%s device SET commands:\n\n", dptr->name); | |
if (dptr->modifiers) { | |
for (mptr = dptr->modifiers; mptr->mask != 0; mptr++) { | |
if (!MODMASK(mptr,MTAB_VDV) && MODMASK(mptr,MTAB_VUN) && (dptr->numunits != 1)) | |
continue; /* skip unit only extended modifiers */ | |
if ((dptr->numunits != 1) && !(mptr->mask & MTAB_XTD)) | |
continue; /* skip unit only simple modifiers */ | |
if (mptr->mstring) { | |
fprint_header (st, &found, header); | |
sprintf (buf, "set %s %s%s", sim_dname (dptr), mptr->mstring, (strchr(mptr->mstring, '=')) ? "" : (MODMASK(mptr,MTAB_VALR) ? "=val" : (MODMASK(mptr,MTAB_VALO) ? "{=val}" : ""))); | |
fprintf (st, "%-30s\t%s\n", buf, (strchr(mptr->mstring, '=')) ? "" : (mptr->help ? mptr->help : "")); | |
} | |
} | |
} | |
if (dptr->flags & DEV_DISABLE) { | |
fprint_header (st, &found, header); | |
sprintf (buf, "set %s ENABLE", sim_dname (dptr)); | |
fprintf (st, "%-30s\tEnables device %s\n", buf, sim_dname (dptr)); | |
sprintf (buf, "set %s DISABLE", sim_dname (dptr)); | |
fprintf (st, "%-30s\tDisables device %s\n", buf, sim_dname (dptr)); | |
} | |
if (dptr->flags & DEV_DEBUG) { | |
fprint_header (st, &found, header); | |
sprintf (buf, "set %s DEBUG", sim_dname (dptr)); | |
fprintf (st, "%-30s\tEnables debugging for device %s\n", buf, sim_dname (dptr)); | |
sprintf (buf, "set %s NODEBUG", sim_dname (dptr)); | |
fprintf (st, "%-30s\tDisables debugging for device %s\n", buf, sim_dname (dptr)); | |
if (dptr->debflags) { | |
strcpy (buf, ""); | |
fprintf (st, "set %s DEBUG=", sim_dname (dptr)); | |
for (dep = dptr->debflags; dep->name != NULL; dep++) | |
fprintf (st, "%s%s", ((dep == dptr->debflags) ? "" : ";"), dep->name); | |
fprintf (st, "\n"); | |
fprintf (st, "%-30s\tEnables specific debugging for device %s\n", buf, sim_dname (dptr)); | |
fprintf (st, "set %s NODEBUG=", sim_dname (dptr)); | |
for (dep = dptr->debflags; dep->name != NULL; dep++) | |
fprintf (st, "%s%s", ((dep == dptr->debflags) ? "" : ";"), dep->name); | |
fprintf (st, "\n"); | |
fprintf (st, "%-30s\tDisables specific debugging for device %s\n", buf, sim_dname (dptr)); | |
} | |
} | |
if ((dptr->modifiers) && (dptr->numunits != 1)) { | |
if (dptr->units->flags & UNIT_DISABLE) { | |
fprint_header (st, &found, header); | |
sprintf (buf, "set %sn ENABLE", sim_dname (dptr)); | |
fprintf (st, "%-30s\tEnables unit %sn\n", buf, sim_dname (dptr)); | |
sprintf (buf, "set %sn DISABLE", sim_dname (dptr)); | |
fprintf (st, "%-30s\tDisables unit %sn\n", buf, sim_dname (dptr)); | |
} | |
for (mptr = dptr->modifiers; mptr->mask != 0; mptr++) { | |
if ((!MODMASK(mptr,MTAB_VUN)) && MODMASK(mptr,MTAB_XTD)) | |
continue; /* skip device only modifiers */ | |
if ((!mptr->valid) && MODMASK(mptr,MTAB_XTD)) | |
continue; /* skip show only modifiers */ | |
if (mptr->mstring) { | |
fprint_header (st, &found, header); | |
sprintf (buf, "set %s%s %s%s", sim_dname (dptr), (dptr->numunits > 1) ? "n" : "0", mptr->mstring, (strchr(mptr->mstring, '=')) ? "" : (MODMASK(mptr,MTAB_VALR) ? "=val" : (MODMASK(mptr,MTAB_VALO) ? "{=val}": ""))); | |
fprintf (st, "%-30s\t%s\n", buf, (strchr(mptr->mstring, '=')) ? "" : (mptr->help ? mptr->help : "")); | |
} | |
} | |
} | |
if (!found && !silent) | |
fprintf (st, "No SET help is available for the %s device\n", dptr->name); | |
} | |
void fprint_set_help (FILE *st, DEVICE *dptr) | |
{ | |
fprint_set_help_ex (st, dptr, TRUE); | |
} | |
void fprint_show_help_ex (FILE *st, DEVICE *dptr, t_bool silent) | |
{ | |
MTAB *mptr; | |
t_bool found = FALSE; | |
char buf[CBUFSIZE], header[CBUFSIZE]; | |
sprintf (header, "\n%s device SHOW commands:\n\n", dptr->name); | |
if (dptr->modifiers) { | |
for (mptr = dptr->modifiers; mptr->mask != 0; mptr++) { | |
if (!MODMASK(mptr,MTAB_VDV) && MODMASK(mptr,MTAB_VUN) && (dptr->numunits != 1)) | |
continue; /* skip unit only extended modifiers */ | |
if ((dptr->numunits != 1) && !(mptr->mask & MTAB_XTD)) | |
continue; /* skip unit only simple modifiers */ | |
if ((!mptr->disp) || (!mptr->pstring) || !(*mptr->pstring)) | |
continue; | |
fprint_header (st, &found, header); | |
sprintf (buf, "show %s %s%s", sim_dname (dptr), mptr->pstring, MODMASK(mptr,MTAB_SHP) ? "=arg" : ""); | |
fprintf (st, "%-30s\t%s\n", buf, mptr->help ? mptr->help : ""); | |
} | |
} | |
if (dptr->flags & DEV_DEBUG) { | |
fprint_header (st, &found, header); | |
sprintf (buf, "show %s DEBUG", sim_dname (dptr)); | |
fprintf (st, "%-30s\tDisplays debugging status for device %s\n", buf, sim_dname (dptr)); | |
} | |
if ((dptr->modifiers) && (dptr->numunits != 1)) { | |
for (mptr = dptr->modifiers; mptr->mask != 0; mptr++) { | |
if ((!MODMASK(mptr,MTAB_VUN)) && MODMASK(mptr,MTAB_XTD)) | |
continue; /* skip device only modifiers */ | |
if ((!mptr->disp) || (!mptr->pstring)) | |
continue; | |
fprint_header (st, &found, header); | |
sprintf (buf, "show %s%s %s%s", sim_dname (dptr), (dptr->numunits > 1) ? "n" : "0", mptr->pstring, MODMASK(mptr,MTAB_SHP) ? "=arg" : ""); | |
fprintf (st, "%-30s\t%s\n", buf, mptr->help ? mptr->help : ""); | |
} | |
} | |
if (!found && !silent) | |
fprintf (st, "No SHOW help is available for the %s device\n", dptr->name); | |
} | |
void fprint_show_help (FILE *st, DEVICE *dptr) | |
{ | |
fprint_show_help_ex (st, dptr, TRUE); | |
} | |
t_stat help_dev_help (FILE *st, DEVICE *dptr, UNIT *uptr, char *cptr) | |
{ | |
char gbuf[CBUFSIZE]; | |
CTAB *cmdp; | |
if (*cptr) { | |
cptr = get_glyph (cptr, gbuf, 0); | |
if ((cmdp = find_cmd (gbuf))) { | |
if (cmdp->action == &exdep_cmd) { | |
if (dptr->help) | |
dptr->help (st, dptr, uptr, 0, cptr); | |
else | |
fprintf (st, "No help available for the %s %s command\n", cmdp->name, sim_dname(dptr)); | |
return SCPE_OK; | |
} | |
if (cmdp->action == &set_cmd) { | |
fprint_set_help_ex (st, dptr, FALSE); | |
return SCPE_OK; | |
} | |
if (cmdp->action == &show_cmd) { | |
fprint_show_help_ex (st, dptr, FALSE); | |
return SCPE_OK; | |
} | |
if (cmdp->action == &attach_cmd) { | |
fprint_attach_help_ex (st, dptr, FALSE); | |
return SCPE_OK; | |
} | |
fprintf (st, "No %s help is available for the %s device\n", cmdp->name, dptr->name); | |
if (dptr->help) | |
dptr->help (st, dptr, uptr, 0, cptr); | |
return SCPE_OK; | |
} | |
if (MATCH_CMD (gbuf, "REGISTERS") == 0) { | |
fprint_reg_help_ex (st, dptr, FALSE); | |
return SCPE_OK; | |
} | |
fprintf (st, "No %s help is available for the %s device\n", gbuf, dptr->name); | |
if (dptr->help) | |
dptr->help (st, dptr, uptr, 0, cptr); | |
return SCPE_OK; | |
} | |
if (dptr->help) { | |
dptr->help (st, dptr, uptr, 0, cptr); | |
return SCPE_OK; | |
} | |
if (dptr->description) | |
fprintf (st, "%s %s help\n", dptr->description (dptr), dptr->name); | |
else | |
fprintf (st, "%s help\n", dptr->name); | |
fprint_set_help_ex (st, dptr, TRUE); | |
fprint_show_help_ex (st, dptr, TRUE); | |
fprint_attach_help_ex (st, dptr, TRUE); | |
fprint_reg_help_ex (st, dptr, TRUE); | |
return SCPE_OK; | |
} | |
t_stat help_cmd (int32 flag, char *cptr) | |
{ | |
char gbuf[CBUFSIZE]; | |
CTAB *cmdp; | |
GET_SWITCHES (cptr); | |
if (*cptr) { | |
cptr = get_glyph (cptr, gbuf, 0); | |
if ((cmdp = find_cmd (gbuf))) { | |
if (*cptr) { | |
if ((cmdp->action == &set_cmd) || (cmdp->action == &show_cmd)) { | |
DEVICE *dptr; | |
UNIT *uptr; | |
t_stat r; | |
cptr = get_glyph (cptr, gbuf, 0); | |
dptr = find_unit (gbuf, &uptr); | |
if (dptr == NULL) { | |
dptr = find_dev (gbuf); | |
if (dptr == NULL) | |
return SCPE_2MARG; | |
} | |
r = help_dev_help (stdout, dptr, uptr, (cmdp->action == &set_cmd) ? "SET" : "SHOW"); | |
if (sim_log) | |
help_dev_help (sim_log, dptr, uptr, (cmdp->action == &set_cmd) ? "SET" : "SHOW"); | |
return r; | |
} | |
else | |
return SCPE_2MARG; | |
} | |
if (cmdp->help) { | |
fputs (cmdp->help, stdout); | |
if (sim_log) | |
fputs (cmdp->help, sim_log); | |
if (strcmp (cmdp->name, "HELP") == 0) { | |
DEVICE *dptr; | |
int i; | |
for (i = 0; (dptr = sim_devices[i]) != NULL; i++) { | |
if (dptr->help) { | |
fprintf (stdout, "h{elp} %-17s type help for device %s\n", dptr->name, dptr->name); | |
if (sim_log) | |
fprintf (sim_log, "h{elp} %-17s type help for device %s\n", dptr->name, dptr->name); | |
} | |
if (dptr->attach_help || | |
(DEV_TYPE(dptr) == DEV_MUX) || | |
(DEV_TYPE(dptr) == DEV_DISK) || | |
(DEV_TYPE(dptr) == DEV_TAPE)) { | |
fprintf (stdout, "h{elp} %s ATTACH\t type help for device %s ATTACH command\n", dptr->name, dptr->name); | |
if (sim_log) | |
fprintf (sim_log, "h{elp} %s ATTACH\t type help for device %s ATTACH command\n", dptr->name, dptr->name); | |
} | |
if (dptr->registers) { | |
if (dptr->registers->name != NULL) { | |
fprintf (stdout, "h{elp} %s REGISTERS\t type help for device %s register variables\n", dptr->name, dptr->name); | |
if (sim_log) | |
fprintf (sim_log, "h{elp} %s REGISTERS\t type help for device %s register variables\n", dptr->name, dptr->name); | |
} | |
} | |
if (dptr->modifiers) { | |
MTAB *mptr; | |
for (mptr = dptr->modifiers; mptr->pstring != NULL; mptr++) { | |
if (mptr->help) { | |
fprintf (stdout, "h{elp} %s SET\t\t type help for device %s SET commands (modifiers)\n", dptr->name, dptr->name); | |
if (sim_log) | |
fprintf (sim_log, "h{elp} %s SET\t\t type help for device %s SET commands (modifiers)\n", dptr->name, dptr->name); | |
break; | |
} | |
} | |
} | |
} | |
} | |
else { | |
if (((cmdp->action == &exdep_cmd) || (0 == strcmp(cmdp->name, "BOOT"))) && | |
sim_dflt_dev->help) { | |
sim_dflt_dev->help (stdout, sim_dflt_dev, sim_dflt_dev->units, 0, cmdp->name); | |
if (sim_log) | |
sim_dflt_dev->help (sim_log, sim_dflt_dev, sim_dflt_dev->units, 0, cmdp->name); | |
} | |
} | |
} | |
else { /* no help so it is likely a command alias */ | |
CTAB *cmdpa; | |
for (cmdpa=cmd_table; cmdpa->name != NULL; cmdpa++) | |
if ((cmdpa->action == cmdp->action) && (cmdpa->help)) { | |
fprintf (stdout, "%s is an alias for the %s command:\n%s", | |
cmdp->name, cmdpa->name, cmdpa->help); | |
if (sim_log) | |
fprintf (sim_log, "%s is an alias for the %s command.\n%s", | |
cmdp->name, cmdpa->name, cmdpa->help); | |
break; | |
} | |
if (cmdpa->name == NULL) { /* not found? */ | |
fprintf (stdout, "No help available for the %s command\n", cmdp->name); | |
if (sim_log) | |
fprintf (sim_log, "No help available for the %s command\n", cmdp->name); | |
} | |
} | |
} | |
else { | |
DEVICE *dptr; | |
UNIT *uptr; | |
dptr = find_unit (gbuf, &uptr); | |
if (dptr == NULL) { | |
dptr = find_dev (gbuf); | |
if (dptr == NULL) | |
return SCPE_ARG; | |
if (dptr->flags & DEV_DISABLE) { | |
fprintf (stdout, "Device %s is currently disabled\n", dptr->name); | |
if (sim_log) | |
fprintf (sim_log, "Device %s is currently disabled\n", dptr->name); | |
} | |
} | |
help_dev_help (stdout, dptr, uptr, cptr); | |
if (sim_log) | |
help_dev_help (stdout, dptr, uptr, cptr); | |
} | |
} | |
else { | |
fprint_help (stdout); | |
if (sim_log) | |
fprint_help (sim_log); | |
} | |
return SCPE_OK; | |
} | |
/* Spawn command */ | |
t_stat spawn_cmd (int32 flag, char *cptr) | |
{ | |
t_stat status; | |
if ((cptr == NULL) || (strlen (cptr) == 0)) | |
cptr = getenv("SHELL"); | |
if ((cptr == NULL) || (strlen (cptr) == 0)) | |
cptr = getenv("ComSpec"); | |
#if defined (VMS) | |
if ((cptr == NULL) || (strlen (cptr) == 0)) | |
cptr = "SPAWN/INPUT=SYS$COMMAND:"; | |
#endif | |
fflush(stdout); /* flush stdout */ | |
if (sim_log) /* flush log if enabled */ | |
fflush (sim_log); | |
status = system (cptr); | |
#if defined (VMS) | |
printf ("\n"); | |
#endif | |
return status; | |
} | |
/* Echo command */ | |
t_stat echo_cmd (int32 flag, char *cptr) | |
{ | |
puts (cptr); | |
if (sim_log) | |
fprintf (sim_log, "%s\n", cptr); | |
return SCPE_OK; | |
} | |
/* Do command | |
Syntax: DO {-E} {-V} <filename> {<arguments>...} | |
-E causes all command errors to be fatal; without it, only EXIT and ASSERT | |
failure will stop a command file. | |
-V causes commands to be echoed before execution. | |
Note that SCPE_STEP ("Step expired") is considered a note and not an error | |
and so does not abort command execution when using -E. | |
Inputs: | |
flag = caller and nesting level indicator | |
fcptr = filename and optional arguments, space-separated | |
Outputs: | |
status = error status | |
The "flag" input value indicates the source of the call, as follows: | |
-1 = initialization file (no error if not found) | |
0 = command line file | |
1 = "DO" command | |
>1 = nested "DO" command | |
*/ | |
t_stat do_cmd (int32 flag, char *fcptr) | |
{ | |
return do_cmd_label (flag, fcptr, NULL); | |
} | |
static char *do_position(void) | |
{ | |
static char cbuf[CBUFSIZE]; | |
sprintf (cbuf, "%s%s%s-%d", sim_do_filename[sim_do_depth], sim_do_label[sim_do_depth] ? "::" : "", sim_do_label[sim_do_depth] ? sim_do_label[sim_do_depth] : "", sim_goto_line[sim_do_depth]); | |
return cbuf; | |
} | |
t_stat do_cmd_label (int32 flag, char *fcptr, char *label) | |
{ | |
char *cptr, cbuf[4*CBUFSIZE], gbuf[CBUFSIZE], *c, quote, *do_arg[10]; | |
FILE *fpin; | |
CTAB *cmdp = NULL; | |
int32 echo, nargs, errabort, i; | |
int32 saved_sim_do_echo = sim_do_echo, | |
saved_sim_show_message = sim_show_message, | |
saved_sim_on_inherit = sim_on_inherit, | |
saved_sim_quiet = sim_quiet; | |
t_bool staying; | |
t_stat stat, stat_nomessage; | |
char *ocptr; | |
stat = SCPE_OK; | |
staying = TRUE; | |
if (flag > 0) /* need switches? */ | |
GET_SWITCHES (fcptr); /* get switches */ | |
echo = (sim_switches & SWMASK ('V')) || sim_do_echo; /* -v means echo */ | |
sim_quiet = (sim_switches & SWMASK ('Q')) || sim_quiet; /* -q means quiet */ | |
sim_on_inherit =(sim_switches & SWMASK ('O')) || sim_on_inherit; /* -o means inherit ON condition actions */ | |
errabort = sim_switches & SWMASK ('E'); /* -e means abort on error */ | |
c = fcptr; | |
for (nargs = 0; nargs < 10; ) { /* extract arguments */ | |
while (isspace (*c)) /* skip blanks */ | |
c++; | |
if (*c == 0) /* all done? */ | |
do_arg [nargs++] = NULL; /* null argument */ | |
else { | |
if (*c == '\'' || *c == '"') /* quoted string? */ | |
quote = *c++; | |
else quote = 0; | |
do_arg[nargs++] = c; /* save start */ | |
while (*c && (quote ? (*c != quote) : !isspace (*c))) | |
c++; | |
if (*c) /* term at quote/spc */ | |
*c++ = 0; | |
} | |
} /* end for */ | |
if (do_arg [0] == NULL) /* need at least 1 */ | |
return SCPE_2FARG; | |
if ((fpin = fopen (do_arg[0], "r")) == NULL) { /* file failed to open? */ | |
strcat (strcpy (cbuf, do_arg[0]), ".sim"); /* try again with .sim extension */ | |
if ((fpin = fopen (cbuf, "r")) == NULL) { /* failed a second time? */ | |
if (flag == 0) /* cmd line file? */ | |
fprintf (stderr, "Can't open file %s\n", do_arg[0]); | |
return SCPE_OPENERR; /* return failure */ | |
} | |
} | |
if (flag >= 0) { /* Only bump nesting from command or nested */ | |
++sim_do_depth; | |
if (sim_on_inherit) { /* inherit ON condition actions? */ | |
sim_on_check[sim_do_depth] = sim_on_check[sim_do_depth-1]; /* inherit On mode */ | |
for (i=0; i<SCPE_MAX_ERR; i++) { /* replicate any on commands */ | |
if (sim_on_actions[sim_do_depth-1][i]) { | |
sim_on_actions[sim_do_depth][i] = malloc(1+strlen(sim_on_actions[sim_do_depth-1][i])); | |
if (NULL == sim_on_actions[sim_do_depth][i]) { | |
while (--i >= 0) { | |
free(sim_on_actions[sim_do_depth][i]); | |
sim_on_actions[sim_do_depth][i] = NULL; | |
} | |
sim_on_check[sim_do_depth] = 0; | |
sim_brk_clract (); /* defang breakpoint actions */ | |
--sim_do_depth; /* unwind nesting */ | |
return SCPE_MEM; | |
} | |
strcpy(sim_on_actions[sim_do_depth][i], sim_on_actions[sim_do_depth-1][i]); | |
} | |
} | |
} | |
} | |
strcpy( sim_do_filename[sim_do_depth], do_arg[0]); /* stash away do file name for possible use by 'call' command */ | |
sim_do_label[sim_do_depth] = label; /* stash away do label for possible use in messages */ | |
sim_goto_line[sim_do_depth] = 0; | |
if (label) { | |
sim_gotofile = fpin; | |
sim_do_echo = echo; | |
stat = goto_cmd (0, label); | |
if (stat != SCPE_OK) { | |
strcpy(cbuf, "RETURN SCPE_ARG"); | |
cptr = get_glyph (cbuf, gbuf, 0); /* get command glyph */ | |
cmdp = find_cmd (gbuf); /* return the errorStage things to the stat will be returned */ | |
goto Cleanup_Return; | |
} | |
} | |
if (errabort) /* -e flag? */ | |
set_on (1, NULL); /* equivalent to ON ERROR RETURN */ | |
do { | |
ocptr = cptr = sim_brk_getact (cbuf, sizeof(cbuf)); /* get bkpt action */ | |
if (!ocptr) { /* no pending action? */ | |
ocptr = cptr = read_line (cbuf, sizeof(cbuf), fpin);/* get cmd line */ | |
sim_goto_line[sim_do_depth] += 1; | |
} | |
sim_sub_args (cbuf, sizeof(cbuf), do_arg); /* substitute args */ | |
if (cptr == NULL) { /* EOF? */ | |
stat = SCPE_OK; /* set good return */ | |
break; | |
} | |
if (*cptr == 0) /* ignore blank */ | |
continue; | |
if (echo) { /* echo if -v */ | |
printf("%s> %s\n", do_position(), cptr); | |
if (sim_log) | |
fprintf (sim_log, "%s> %s\n", do_position(), cptr); | |
} | |
if (*cptr == ':') /* ignore label */ | |
continue; | |
cptr = get_glyph (cptr, gbuf, 0); /* get command glyph */ | |
sim_switches = 0; /* init switches */ | |
sim_gotofile = fpin; | |
sim_do_echo = echo; | |
if ((cmdp = find_cmd (gbuf))) { /* lookup command */ | |
if (cmdp->action == &return_cmd) /* RETURN command? */ | |
break; /* done! */ | |
if (cmdp->action == &do_cmd) { /* DO command? */ | |
if (sim_do_depth >= MAX_DO_NEST_LVL) /* nest too deep? */ | |
stat = SCPE_NEST; | |
else | |
stat = do_cmd (sim_do_depth+1, cptr); /* exec DO cmd */ | |
} | |
else | |
if (cmdp->action == &shift_cmd) /* SHIFT command */ | |
stat = shift_args(do_arg, sizeof(do_arg)/sizeof(do_arg[0])); | |
else | |
stat = cmdp->action (cmdp->arg, cptr); /* exec other cmd */ | |
} | |
else stat = SCPE_UNK; /* bad cmd given */ | |
stat_nomessage = stat & SCPE_NOMESSAGE; /* extract possible message supression flag */ | |
stat_nomessage = stat_nomessage || (!sim_show_message);/* Apply global suppression */ | |
stat = SCPE_BARE_STATUS(stat); /* remove possible flag */ | |
if ((stat != SCPE_OK) || | |
((cmdp->action != &return_cmd) && | |
(cmdp->action != &goto_cmd) && | |
(cmdp->action != &on_cmd) && | |
(cmdp->action != &echo_cmd))) | |
sim_last_cmd_stat = stat; /* save command error status */ | |
switch (stat) { | |
case SCPE_AFAIL: | |
staying = (sim_on_check[sim_do_depth] && /* if trap action defined */ | |
sim_on_actions[sim_do_depth][stat]); /* use it, otherwise exit */ | |
break; | |
case SCPE_EXIT: | |
staying = FALSE; | |
break; | |
case SCPE_OK: | |
case SCPE_STEP: | |
break; | |
default: | |
break; | |
} | |
if ((stat >= SCPE_BASE) && (stat != SCPE_EXIT) && /* error from cmd? */ | |
(stat != SCPE_STEP)) { | |
if (!echo && !sim_quiet && /* report if not echoing */ | |
!stat_nomessage && /* and not suppressing messages */ | |
!(cmdp && cmdp->message)) { /* and not handling them specially */ | |
printf("%s> %s\n", do_position(), ocptr); | |
if (sim_log) | |
fprintf (sim_log, "%s> %s\n", do_position(), ocptr); | |
} | |
} | |
if (!stat_nomessage) { /* report error if not suppressed */ | |
if (cmdp && cmdp->message) /* special message handler */ | |
cmdp->message ((!echo && !sim_quiet) ? ocptr : NULL, stat); | |
else | |
if (stat >= SCPE_BASE) { /* report error if not suppressed */ | |
printf ("%s\n", sim_error_text (stat)); | |
if (sim_log) | |
fprintf (sim_log, "%s\n", sim_error_text (stat)); | |
} | |
} | |
if (staying && | |
(sim_on_check[sim_do_depth]) && | |
(stat != SCPE_OK) && | |
(stat != SCPE_STEP)) { | |
if ((stat <= SCPE_MAX_ERR) && sim_on_actions[sim_do_depth][stat]) | |
sim_brk_act[sim_do_depth] = sim_on_actions[sim_do_depth][stat]; | |
else | |
sim_brk_act[sim_do_depth] = sim_on_actions[sim_do_depth][0]; | |
} | |
if (sim_vm_post != NULL) | |
(*sim_vm_post) (TRUE); | |
} while (staying); | |
Cleanup_Return: | |
fclose (fpin); /* close file */ | |
sim_gotofile = NULL; | |
if (flag >= 0) { | |
sim_do_echo = saved_sim_do_echo; /* restore echo state we entered with */ | |
sim_show_message = saved_sim_show_message; /* restore message display state we entered with */ | |
sim_on_inherit = saved_sim_on_inherit; /* restore ON inheritance state we entered with */ | |
} | |
sim_quiet = saved_sim_quiet; /* restore quiet mode we entered with */ | |
if ((flag >= 0) || (!sim_on_inherit)) { | |
for (i=0; i<SCPE_MAX_ERR; i++) { /* release any on commands */ | |
free (sim_on_actions[sim_do_depth][i]); | |
sim_on_actions[sim_do_depth][i] = NULL; | |
} | |
sim_on_check[sim_do_depth] = 0; /* clear on mode */ | |
} | |
if (flag >= 0) | |
--sim_do_depth; /* unwind nesting */ | |
sim_brk_clract (); /* defang breakpoint actions */ | |
if (cmdp && (cmdp->action == &return_cmd) && (0 != *cptr)) { /* return command with argument? */ | |
sim_string_to_stat (cptr, &stat); | |
sim_last_cmd_stat = stat; /* save explicit status as command error status */ | |
if (sim_switches & SWMASK ('Q')) | |
stat |= SCPE_NOMESSAGE; /* suppress error message display (in caller) if requested */ | |
return stat; /* return with explicit return status */ | |
} | |
return stat | SCPE_NOMESSAGE; /* suppress message since we've already done that here */ | |
} | |
/* Substitute_args - replace %n tokens in 'instr' with the do command's arguments | |
and other enviroment variables | |
Calling sequence | |
instr = input string | |
instr_size = sizeof input string buffer | |
do_arg[10] = arguments | |
Token "%0" expands to the command file name. | |
Token %n (n being a single digit) expands to the n'th argument | |
Tonen %* expands to the whole set of arguments (%1 ... %9) | |
The input sequence "\%" represents a literal "%", and "\\" represents a | |
literal "\". All other character combinations are rendered literally. | |
Omitted parameters result in null-string substitutions. | |
A Tokens preceeded and followed by % characters are expanded as environment | |
variables, and if one isn't found then can be one of several special | |
variables: | |
%DATE% yyyy/mm/dd | |
%TIME% hh:mm:ss | |
%CTIME% Www Mmm dd hh:mm:ss yyyy | |
%STATUS% Status value from the last command executed | |
%TSTATUS% The text form of the last status value | |
%SIM_VERIFY% The Verify/Verbose mode of the current Do command file | |
%SIM_VERBOSE% The Verify/Verbose mode of the current Do command file | |
%SIM_QUIET% The Quiet mode of the current Do command file | |
%SIM_MESSAGE% The message display status of the current Do command file | |
Environment variable lookups are done first with the precise name between | |
the % characters and if that fails, then the name between the % characters | |
is upcased and a lookup of that valus is attempted. | |
The first Space delimited token on the line is extracted in uppercase and | |
then looked up as an environment variable. If found it the value is | |
supstituted for the original string before expanding everything else. If | |
it is not found, then the original beginning token on the line is left | |
untouched. | |
*/ | |
void sim_sub_args (char *instr, size_t instr_size, char *do_arg[]) | |
{ | |
char gbuf[CBUFSIZE]; | |
char *ip = instr, *op, *ap, *oend, *istart, *tmpbuf; | |
char rbuf[CBUFSIZE]; | |
int i; | |
tmpbuf = malloc(instr_size); | |
op = tmpbuf; | |
oend = tmpbuf + instr_size - 2; | |
while (isspace (*ip)) /* skip leading spaces */ | |
*op++ = *ip++; | |
istart = ip; | |
for (; *ip && (op < oend); ) { | |
if ((ip [0] == '\\') && /* literal escape? */ | |
((ip [1] == '%') || (ip [1] == '\\'))) { /* and followed by '%' or '\'? */ | |
ip++; /* skip '\' */ | |
*op++ = *ip++; /* copy escaped char */ | |
} | |
else | |
if (*ip == '%') { /* sub? */ | |
if ((ip[1] >= '0') && (ip[1] <= ('9'))) { /* %n = sub */ | |
ap = do_arg[ip[1] - '0']; | |
for (i=0; i<ip[1] - '0'; ++i) /* make sure we're not past the list end */ | |
if (do_arg[i] == NULL) { | |
ap = NULL; | |
break; | |
} | |
ip = ip + 2; | |
} | |
else if (ip[1] == '*') { /* %1 ... %9 = sub */ | |
memset (rbuf, '\0', sizeof(rbuf)); | |
ap = rbuf; | |
for (i=1; i<=9; ++i) | |
if (do_arg[i] == NULL) | |
break; | |
else | |
if ((sizeof(rbuf)-strlen(rbuf)) < (2 + strlen(do_arg[i]))) { | |
if (strchr(do_arg[i], ' ')) { /* need to surround this argument with quotes */ | |
char quote = '"'; | |
if (strchr(do_arg[i], quote)) | |
quote = '\''; | |
sprintf(&rbuf[strlen(rbuf)], "%s%c%s%c\"", (i != 1) ? " " : "", quote, do_arg[i], quote); | |
} | |
else | |
sprintf(&rbuf[strlen(rbuf)], "%s%s", (i != 1) ? " " : "", do_arg[i]); | |
} | |
else | |
break; | |
} | |
else { /* environment variable */ | |
ap = NULL; | |
get_glyph_nc (ip+1, gbuf, '%'); /* first try using the literal name */ | |
ap = getenv(gbuf); | |
if (!ap) { | |
get_glyph (ip+1, gbuf, '%'); /* now try using the upcased name */ | |
ap = getenv(gbuf); | |
} | |
ip += 1 + strlen (gbuf); | |
if (*ip == '%') ++ip; | |
if (!ap) { | |
time_t now; | |
struct tm *tmnow; | |
time(&now); | |
tmnow = localtime(&now); | |
if (!strcmp ("DATE", gbuf)) { | |
sprintf (rbuf, "%4d/%02d/%02d", tmnow->tm_year+1900, tmnow->tm_mon+1, tmnow->tm_mday); | |
ap = rbuf; | |
} | |
else if (!strcmp ("TIME", gbuf)) { | |
sprintf (rbuf, "%02d:%02d:%02d", tmnow->tm_hour, tmnow->tm_min, tmnow->tm_sec); | |
ap = rbuf; | |
} | |
else if (!strcmp ("CTIME", gbuf)) { | |
strcpy (rbuf, ctime(&now)); | |
rbuf[strlen (rbuf)-1] = '\0'; /* remove trailing \n */ | |
ap = rbuf; | |
} | |
else if (!strcmp ("STATUS", gbuf)) { | |
sprintf (rbuf, "%08X", sim_last_cmd_stat); | |
ap = rbuf; | |
} | |
else if (!strcmp ("TSTATUS", gbuf)) { | |
sprintf (rbuf, "%s", sim_error_text (sim_last_cmd_stat)); | |
ap = rbuf; | |
} | |
else if (!strcmp ("SIM_VERIFY", gbuf)) { | |
sprintf (rbuf, "%s", sim_do_echo ? "-V" : ""); | |
ap = rbuf; | |
} | |
else if (!strcmp ("SIM_VERBOSE", gbuf)) { | |
sprintf (rbuf, "%s", sim_do_echo ? "-V" : ""); | |
ap = rbuf; | |
} | |
else if (!strcmp ("SIM_QUIET", gbuf)) { | |
sprintf (rbuf, "%s", sim_quiet ? "-Q" : ""); | |
ap = rbuf; | |
} | |
else if (!strcmp ("SIM_MESSAGE", gbuf)) { | |
sprintf (rbuf, "%s", sim_show_message ? "" : "-Q"); | |
ap = rbuf; | |
} | |
} | |
} | |
if (ap) { /* non-null arg? */ | |
while (*ap && (op < oend)) /* copy the argument */ | |
*op++ = *ap++; | |
} | |
} | |
else | |
if (ip == istart) { /* at beginning of input? */ | |
get_glyph (instr, gbuf, 0); /* substitute initial token */ | |
ap = getenv(gbuf); /* if it is an environment variable name */ | |
if (!ap) { /* nope? */ | |
*op++ = *ip++; /* press on with literal character */ | |
continue; | |
} | |
while (*ap && (op < oend)) /* copy the translation */ | |
*op++ = *ap++; | |
ip += strlen(gbuf); | |
} | |
else | |
*op++ = *ip++; /* literal character */ | |
} | |
*op = 0; /* term buffer */ | |
strcpy (instr, tmpbuf); | |
free (tmpbuf); | |
return; | |
} | |
t_stat shift_args (char *do_arg[], size_t arg_count) | |
{ | |
size_t i; | |
for (i=1; i<arg_count-1; ++i) | |
do_arg[i] = do_arg[i+1]; | |
return SCPE_OK; | |
} | |
/* Assert command | |
Syntax: ASSERT {<dev>} <reg>{<logical-op><value>}<conditional-op><value> | |
If <dev> is not specified, CPU is assumed. <value> is expressed in the radix | |
specified for <reg>. <logical-op> and <conditional-op> are the same as that | |
allowed for examine and deposit search specifications. */ | |
t_stat assert_cmd (int32 flag, char *cptr) | |
{ | |
char gbuf[CBUFSIZE], *gptr, *tptr; | |
REG *rptr; | |
uint32 idx; | |
t_value val; | |
t_stat r; | |
cptr = get_sim_opt (CMD_OPT_SW|CMD_OPT_DFT, cptr, &r); /* get sw, default */ | |
sim_stab.boolop = -1; /* no relational op dflt */ | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
cptr = get_glyph (cptr, gbuf, 0); /* get register */ | |
rptr = find_reg (gbuf, &gptr, sim_dfdev); /* parse register */ | |
if (!rptr) /* not there */ | |
return SCPE_NXREG; | |
if (*gptr == '[') { /* subscript? */ | |
if (rptr->depth <= 1) /* array register? */ | |
return SCPE_ARG; | |
idx = (uint32) strtotv (++gptr, &tptr, 10); /* convert index */ | |
if ((gptr == tptr) || (*tptr++ != ']')) | |
return SCPE_ARG; | |
gptr = tptr; /* update */ | |
} | |
else idx = 0; /* not array */ | |
if (idx >= rptr->depth) /* validate subscript */ | |
return SCPE_SUB; | |
if (*gptr != 0) /* more? must be search */ | |
get_glyph (gptr, gbuf, 0); | |
else { | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
cptr = get_glyph (cptr, gbuf, 0); /* get search cond */ | |
} | |
if (*cptr != 0) /* must be done */ | |
return SCPE_2MARG; | |
if (!get_search (gbuf, rptr->radix, &sim_stab) || /* parse condition */ | |
(sim_stab.boolop == -1)) /* relational op reqd */ | |
return SCPE_MISVAL; | |
val = get_rval (rptr, idx); /* get register value */ | |
if (test_search (val, &sim_stab)) /* test condition */ | |
return SCPE_OK; | |
return SCPE_AFAIL; /* condition fails */ | |
} | |
/* Goto command */ | |
t_stat goto_cmd (int32 flag, char *fcptr) | |
{ | |
char *cptr, cbuf[CBUFSIZE], gbuf[CBUFSIZE], gbuf1[CBUFSIZE]; | |
long fpos; | |
int32 saved_do_echo = sim_do_echo; | |
int32 saved_goto_line = sim_goto_line[sim_do_depth]; | |
if (NULL == sim_gotofile) return SCPE_UNK; /* only valid inside of do_cmd */ | |
get_glyph (fcptr, gbuf1, 0); | |
if ('\0' == gbuf1[0]) return SCPE_ARG; /* unspecified goto target */ | |
fpos = ftell(sim_gotofile); /* Save start position */ | |
rewind(sim_gotofile); /* start search for label */ | |
sim_goto_line[sim_do_depth] = 0; /* reset line number */ | |
sim_do_echo = 0; /* Don't echo while searching for label */ | |
while (1) { | |
cptr = read_line (cbuf, sizeof(cbuf), sim_gotofile);/* get cmd line */ | |
if (cptr == NULL) break; /* exit on eof */ | |
sim_goto_line[sim_do_depth] += 1; /* record line number */ | |
if (*cptr == 0) continue; /* ignore blank */ | |
if (*cptr != ':') continue; /* ignore non-labels */ | |
++cptr; /* skip : */ | |
while (isspace (*cptr)) ++cptr; /* skip blanks */ | |
cptr = get_glyph (cptr, gbuf, 0); /* get label glyph */ | |
if (0 == strcmp(gbuf, gbuf1)) { | |
sim_brk_clract (); /* goto defangs current actions */ | |
sim_do_echo = saved_do_echo; /* restore echo mode */ | |
if (sim_do_echo) /* echo if -v */ | |
printf("%s> %s\n", do_position(), cbuf); | |
if (sim_do_echo && sim_log) | |
fprintf (sim_log, "%s> %s\n", do_position(), cbuf); | |
return SCPE_OK; | |
} | |
} | |
sim_do_echo = saved_do_echo; /* restore echo mode */ | |
fseek(sim_gotofile, fpos, SEEK_SET); /* resture start position */ | |
sim_goto_line[sim_do_depth] = saved_goto_line; /* restore start line number */ | |
return SCPE_ARG; | |
} | |
/* Return command */ | |
/* The return command is invalid unless encountered in a do_cmd context, */ | |
/* and in that context, it is handled as a special case inside of do_cmd() */ | |
/* and not dispatched here, so if we get here a return has been issued from */ | |
/* interactive input */ | |
t_stat return_cmd (int32 flag, char *fcptr) | |
{ | |
return SCPE_UNK; /* only valid inside of do_cmd */ | |
} | |
/* Shift command */ | |
/* The shift command is invalid unless encountered in a do_cmd context, */ | |
/* and in that context, it is handled as a special case inside of do_cmd() */ | |
/* and not dispatched here, so if we get here a shift has been issued from */ | |
/* interactive input (it is not valid interactively since it would have to */ | |
/* mess with the program's argv which is owned by the C runtime library */ | |
t_stat shift_cmd (int32 flag, char *fcptr) | |
{ | |
return SCPE_UNK; /* only valid inside of do_cmd */ | |
} | |
/* Call command */ | |
/* The call command is invalid unless encountered in a do_cmd context, */ | |
/* and in that context, it is handled as a special case inside of do_cmd() */ | |
/* and not dispatched here, so if we get here a call has been issued from */ | |
/* interactive input */ | |
t_stat call_cmd (int32 flag, char *fcptr) | |
{ | |
char *cptr, cbuf[CBUFSIZE], gbuf[CBUFSIZE]; | |
if (NULL == sim_gotofile) return SCPE_UNK; /* only valid inside of do_cmd */ | |
cptr = get_glyph (fcptr, gbuf, 0); | |
if ('\0' == gbuf[0]) return SCPE_ARG; /* unspecified goto target */ | |
sprintf(cbuf, "%s %s", sim_do_filename[sim_do_depth], cptr); | |
sim_switches |= SWMASK ('O'); /* inherit ON state and actions */ | |
return do_cmd_label (flag, cbuf, gbuf); | |
} | |
/* On command */ | |
t_stat on_cmd (int32 flag, char *cptr) | |
{ | |
char gbuf[CBUFSIZE]; | |
t_stat cond; | |
cptr = get_glyph (cptr, gbuf, 0); | |
if ('\0' == gbuf[0]) return SCPE_ARG; /* unspecified condition */ | |
if (0 == strcmp("ERROR", gbuf)) | |
cond = 0; | |
else | |
if (SCPE_OK != sim_string_to_stat (gbuf, &cond)) | |
return SCPE_ARG; | |
if ((NULL == cptr) || ('\0' == *cptr)) { /* Empty Action */ | |
free(sim_on_actions[sim_do_depth][cond]); /* Clear existing condition */ | |
sim_on_actions[sim_do_depth][cond] = NULL; } | |
else { | |
sim_on_actions[sim_do_depth][cond] = | |
realloc(sim_on_actions[sim_do_depth][cond], 1+strlen(cptr)); | |
strcpy(sim_on_actions[sim_do_depth][cond], cptr); | |
} | |
return SCPE_OK; | |
} | |
/* noop command */ | |
/* The noop command (IGNORE, PROCEED) does nothing */ | |
t_stat noop_cmd (int32 flag, char *cptr) | |
{ | |
if (cptr && (*cptr != 0)) /* now eol? */ | |
return SCPE_2MARG; | |
return SCPE_OK; /* we're happy doing nothing */ | |
} | |
/* Set on/noon routine */ | |
t_stat set_on (int32 flag, char *cptr) | |
{ | |
if ((flag) && (cptr) && (*cptr)) { /* Set ON with arg */ | |
char gbuf[CBUFSIZE]; | |
cptr = get_glyph (cptr, gbuf, 0); /* get command glyph */ | |
if (((MATCH_CMD(gbuf,"INHERIT")) && | |
(MATCH_CMD(gbuf,"NOINHERIT"))) || | |
(*cptr)) | |
return SCPE_2MARG; | |
if ((gbuf[0]) && (0 == MATCH_CMD(gbuf,"INHERIT"))) | |
sim_on_inherit = 1; | |
if ((gbuf[0]) && (0 == MATCH_CMD(gbuf,"NOINHERIT"))) | |
sim_on_inherit = 0; | |
return SCPE_OK; | |
} | |
if (cptr && (*cptr != 0)) /* now eol? */ | |
return SCPE_2MARG; | |
sim_on_check[sim_do_depth] = flag; | |
if ((sim_do_depth != 0) && | |
(NULL == sim_on_actions[sim_do_depth][0])) { /* default handler set? */ | |
sim_on_actions[sim_do_depth][0] = /* No, so make "RETURN" */ | |
malloc(1+strlen("RETURN")); /* be the default action */ | |
strcpy(sim_on_actions[sim_do_depth][0], "RETURN"); | |
} | |
if ((sim_do_depth != 0) && | |
(NULL == sim_on_actions[sim_do_depth][SCPE_AFAIL])) {/* handler set for AFAIL? */ | |
sim_on_actions[sim_do_depth][SCPE_AFAIL] = /* No, so make "RETURN" */ | |
malloc(1+strlen("RETURN")); /* be the action */ | |
strcpy(sim_on_actions[sim_do_depth][SCPE_AFAIL], "RETURN"); | |
} | |
return SCPE_OK; | |
} | |
/* Set verify/noverify routine */ | |
t_stat set_verify (int32 flag, char *cptr) | |
{ | |
if (cptr && (*cptr != 0)) /* now eol? */ | |
return SCPE_2MARG; | |
if (flag == sim_do_echo) /* already set correctly? */ | |
return SCPE_OK; | |
sim_do_echo = flag; | |
return SCPE_OK; | |
} | |
/* Set message/nomessage routine */ | |
t_stat set_message (int32 flag, char *cptr) | |
{ | |
if (cptr && (*cptr != 0)) /* now eol? */ | |
return SCPE_2MARG; | |
if (flag == sim_show_message) /* already set correctly? */ | |
return SCPE_OK; | |
sim_show_message = flag; | |
return SCPE_OK; | |
} | |
/* Set quiet/noquiet routine */ | |
t_stat set_quiet (int32 flag, char *cptr) | |
{ | |
if (cptr && (*cptr != 0)) /* now eol? */ | |
return SCPE_2MARG; | |
if (flag == sim_quiet) /* already set correctly? */ | |
return SCPE_OK; | |
sim_quiet = flag; | |
return SCPE_OK; | |
} | |
/* Set asynch/noasynch routine */ | |
t_stat sim_set_asynch (int32 flag, char *cptr) | |
{ | |
if (cptr && (*cptr != 0)) /* now eol? */ | |
return SCPE_2MARG; | |
#ifdef SIM_ASYNCH_IO | |
if (flag == sim_asynch_enabled) /* already set correctly? */ | |
return SCPE_OK; | |
sim_asynch_enabled = flag; | |
tmxr_change_async (); | |
sim_timer_change_asynch (); | |
if (1) { | |
uint32 i, j; | |
DEVICE *dptr; | |
UNIT *uptr; | |
/* Call unit flush routines to report asynch status change to device layer */ | |
for (i = 1; (dptr = sim_devices[i]) != NULL; i++) { /* flush attached files */ | |
for (j = 0; j < dptr->numunits; j++) { /* if not buffered in mem */ | |
uptr = dptr->units + j; | |
if ((uptr->flags & UNIT_ATT) && /* attached, */ | |
!(uptr->flags & UNIT_BUF) && /* not buffered, */ | |
(uptr->fileref)) /* real file, */ | |
if (uptr->io_flush) /* unit specific flush routine */ | |
uptr->io_flush (uptr); | |
} | |
} | |
} | |
if (!sim_quiet) | |
printf ("Asynchronous I/O %sabled\n", sim_asynch_enabled ? "en" : "dis"); | |
if (sim_log) | |
fprintf (sim_log, "Asynchronous I/O %sabled\n", sim_asynch_enabled ? "en" : "dis"); | |
return SCPE_OK; | |
#else | |
if (!sim_quiet) | |
printf ("Asynchronous I/O is not available in this simulator\n"); | |
if (sim_log) | |
fprintf (sim_log, "Asynchronous I/O is not available in this simulator\n"); | |
return SCPE_NOFNC; | |
#endif | |
} | |
/* Show asynch routine */ | |
t_stat sim_show_asynch (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
if (cptr && (*cptr != 0)) | |
return SCPE_2MARG; | |
#ifdef SIM_ASYNCH_IO | |
fprintf (st, "Asynchronous I/O is %sabled, %s\n", (sim_asynch_enabled) ? "en" : "dis", AIO_QUEUE_MODE); | |
#if defined(SIM_ASYNCH_MUX) | |
fprintf (st, "Asynchronous Multiplexer support is available\n"); | |
#endif | |
#if defined(SIM_ASYNCH_CLOCKS) | |
fprintf (st, "Asynchronous Clock is %sabled\n", (sim_asynch_timer) ? "en" : "dis"); | |
#endif | |
#else | |
fprintf (st, "Asynchronous I/O is not available in this simulator\n"); | |
#endif | |
return SCPE_OK; | |
} | |
/* Set environment routine */ | |
t_stat sim_set_environment (int32 flag, char *cptr) | |
{ | |
char varname[CBUFSIZE]; | |
if ((!cptr) || (*cptr == 0)) /* now eol? */ | |
return SCPE_2FARG; | |
cptr = get_glyph (cptr, varname, '='); /* get environment variable name */ | |
setenv(varname, cptr, 1); | |
return SCPE_OK; | |
} | |
/* Set command */ | |
t_stat set_cmd (int32 flag, char *cptr) | |
{ | |
uint32 lvl = 0; | |
t_stat r; | |
char gbuf[CBUFSIZE], *cvptr, *svptr; | |
DEVICE *dptr; | |
UNIT *uptr; | |
MTAB *mptr; | |
CTAB *gcmdp; | |
C1TAB *ctbr, *glbr; | |
static CTAB set_glob_tab[] = { | |
{ "CONSOLE", &sim_set_console, 0 }, | |
{ "REMOTE", &sim_set_remote_console, 0 }, | |
{ "BREAK", &brk_cmd, SSH_ST }, | |
{ "DEFAULT", &set_default_cmd, 1 }, | |
{ "NOBREAK", &brk_cmd, SSH_CL }, | |
{ "TELNET", &sim_set_telnet, 0 }, /* deprecated */ | |
{ "NOTELNET", &sim_set_notelnet, 0 }, /* deprecated */ | |
{ "LOG", &sim_set_logon, 0 }, /* deprecated */ | |
{ "NOLOG", &sim_set_logoff, 0 }, /* deprecated */ | |
{ "DEBUG", &sim_set_debon, 0 }, /* deprecated */ | |
{ "NODEBUG", &sim_set_deboff, 0 }, /* deprecated */ | |
{ "THROTTLE", &sim_set_throt, 1 }, | |
{ "NOTHROTTLE", &sim_set_throt, 0 }, | |
{ "ASYNCH", &sim_set_asynch, 1 }, | |
{ "NOASYNCH", &sim_set_asynch, 0 }, | |
{ "ENVIRONMENT", &sim_set_environment, 1 }, | |
{ "ON", &set_on, 1 }, | |
{ "NOON", &set_on, 0 }, | |
{ "VERIFY", &set_verify, 1 }, | |
{ "VEBOSE", &set_verify, 1 }, | |
{ "NOVERIFY", &set_verify, 0 }, | |
{ "NOVEBOSE", &set_verify, 0 }, | |
{ "MESSAGE", &set_message, 1 }, | |
{ "NOMESSAGE", &set_message, 0 }, | |
{ "QUIET", &set_quiet, 1 }, | |
{ "NOQUIET", &set_quiet, 0 }, | |
{ "PROMPT", &set_prompt, 0 }, | |
{ NULL, NULL, 0 } | |
}; | |
static C1TAB set_dev_tab[] = { | |
{ "OCTAL", &set_dev_radix, 8 }, | |
{ "DECIMAL", &set_dev_radix, 10 }, | |
{ "HEX", &set_dev_radix, 16 }, | |
{ "ENABLED", &set_dev_enbdis, 1 }, | |
{ "DISABLED", &set_dev_enbdis, 0 }, | |
{ "DEBUG", &set_dev_debug, 1 }, | |
{ "NODEBUG", &set_dev_debug, 0 }, | |
{ NULL, NULL, 0 } | |
}; | |
static C1TAB set_unit_tab[] = { | |
{ "ENABLED", &set_unit_enbdis, 1 }, | |
{ "DISABLED", &set_unit_enbdis, 0 }, | |
{ NULL, NULL, 0 } | |
}; | |
GET_SWITCHES (cptr); /* get switches */ | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
cptr = get_glyph (cptr, gbuf, 0); /* get glob/dev/unit */ | |
if ((dptr = find_dev (gbuf))) { /* device match? */ | |
uptr = dptr->units; /* first unit */ | |
ctbr = set_dev_tab; /* global table */ | |
lvl = MTAB_VDV; /* device match */ | |
GET_SWITCHES (cptr); /* get more switches */ | |
} | |
else if ((dptr = find_unit (gbuf, &uptr))) { /* unit match? */ | |
if (uptr == NULL) /* invalid unit */ | |
return SCPE_NXUN; | |
ctbr = set_unit_tab; /* global table */ | |
lvl = MTAB_VUN; /* unit match */ | |
GET_SWITCHES (cptr); /* get more switches */ | |
} | |
else if ((gcmdp = find_ctab (set_glob_tab, gbuf))) { /* global? */ | |
GET_SWITCHES (cptr); /* get more switches */ | |
return gcmdp->action (gcmdp->arg, cptr); /* do the rest */ | |
} | |
else { | |
if (sim_dflt_dev->modifiers) | |
for (mptr = sim_dflt_dev->modifiers; mptr->mask != 0; mptr++) { | |
if (mptr->mstring && (MATCH_CMD (gbuf, mptr->mstring) == 0)) { | |
dptr = sim_dflt_dev; | |
cptr -= strlen (gbuf) + 1; | |
while (isspace(*cptr)) | |
++cptr; | |
break; | |
} | |
} | |
if (!dptr) | |
return SCPE_NXDEV; /* no match */ | |
lvl = MTAB_VDV; /* device match */ | |
uptr = dptr->units; /* first unit */ | |
} | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
GET_SWITCHES (cptr); /* get more switches */ | |
while (*cptr != 0) { /* do all mods */ | |
cptr = get_glyph (svptr = cptr, gbuf, ','); /* get modifier */ | |
if ((cvptr = strchr (gbuf, '='))) /* = value? */ | |
*cvptr++ = 0; | |
for (mptr = dptr->modifiers; mptr && (mptr->mask != 0); mptr++) { | |
if ((mptr->mstring) && /* match string */ | |
(MATCH_CMD (gbuf, mptr->mstring) == 0)) { /* matches option? */ | |
if (mptr->mask & MTAB_XTD) { /* extended? */ | |
if (((lvl & mptr->mask) & ~MTAB_XTD) == 0) | |
return SCPE_ARG; | |
if ((lvl == MTAB_VUN) && (uptr->flags & UNIT_DIS)) | |
return SCPE_UDIS; /* unit disabled? */ | |
if (mptr->valid) { /* validation rtn? */ | |
if (cvptr && MODMASK(mptr,MTAB_QUOTE)) { | |
get_glyph_quoted (svptr, gbuf, ','); | |
if ((cvptr = strchr (gbuf, '='))) | |
*cvptr++ = 0; | |
} | |
else { | |
if (cvptr && MODMASK(mptr,MTAB_NC)) { | |
get_glyph_nc (svptr, gbuf, ','); | |
if ((cvptr = strchr (gbuf, '='))) | |
*cvptr++ = 0; | |
} | |
} | |
r = mptr->valid (uptr, mptr->match, cvptr, mptr->desc); | |
if (r != SCPE_OK) | |
return r; | |
} | |
else if (!mptr->desc) /* value desc? */ | |
break; | |
// else if (mptr->mask & MTAB_VAL) { /* take a value? */ | |
// if (!cvptr) return SCPE_MISVAL; /* none? error */ | |
// r = dep_reg (0, cvptr, (REG *) mptr->desc, 0); | |
// if (r != SCPE_OK) return r; | |
// } | |
else if (cvptr) /* = value? */ | |
return SCPE_ARG; | |
else *((int32 *) mptr->desc) = mptr->match; | |
} /* end if xtd */ | |
else { /* old style */ | |
if (cvptr) /* = value? */ | |
return SCPE_ARG; | |
if (uptr->flags & UNIT_DIS) /* disabled? */ | |
return SCPE_UDIS; | |
if ((mptr->valid) && /* invalid? */ | |
((r = mptr->valid (uptr, mptr->match, cvptr, mptr->desc)) != SCPE_OK)) | |
return r; | |
uptr->flags = (uptr->flags & ~(mptr->mask)) | | |
(mptr->match & mptr->mask); /* set new value */ | |
} /* end else xtd */ | |
break; /* terminate for */ | |
} /* end if match */ | |
} /* end for */ | |
if (!mptr || (mptr->mask == 0)) { /* no match? */ | |
if ((glbr = find_c1tab (ctbr, gbuf))) { /* global match? */ | |
r = glbr->action (dptr, uptr, glbr->arg, cvptr); /* do global */ | |
if (r != SCPE_OK) | |
return r; | |
} | |
else if (!dptr->modifiers) /* no modifiers? */ | |
return SCPE_NOPARAM; | |
else return SCPE_NXPAR; | |
} /* end if no mat */ | |
} /* end while */ | |
return SCPE_OK; /* done all */ | |
} | |
/* Match CTAB/CTAB1 name */ | |
CTAB *find_ctab (CTAB *tab, char *gbuf) | |
{ | |
for (; tab->name != NULL; tab++) { | |
if (MATCH_CMD (gbuf, tab->name) == 0) | |
return tab; | |
} | |
return NULL; | |
} | |
C1TAB *find_c1tab (C1TAB *tab, char *gbuf) | |
{ | |
for (; tab->name != NULL; tab++) { | |
if (MATCH_CMD (gbuf, tab->name) == 0) | |
return tab; | |
} | |
return NULL; | |
} | |
/* Set device data radix routine */ | |
t_stat set_dev_radix (DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
if (cptr) | |
return SCPE_ARG; | |
dptr->dradix = flag & 037; | |
return SCPE_OK; | |
} | |
/* Set device enabled/disabled routine */ | |
t_stat set_dev_enbdis (DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
UNIT *up; | |
uint32 i; | |
if (cptr) | |
return SCPE_ARG; | |
if ((dptr->flags & DEV_DISABLE) == 0) /* allowed? */ | |
return SCPE_NOFNC; | |
if (flag) { /* enable? */ | |
if ((dptr->flags & DEV_DIS) == 0) /* already enb? ok */ | |
return SCPE_OK; | |
dptr->flags = dptr->flags & ~DEV_DIS; /* no, enable */ | |
} | |
else { | |
if (dptr->flags & DEV_DIS) /* already dsb? ok */ | |
return SCPE_OK; | |
for (i = 0; i < dptr->numunits; i++) { /* check units */ | |
up = (dptr->units) + i; /* att or active? */ | |
if ((up->flags & UNIT_ATT) || sim_is_active (up)) | |
return SCPE_NOFNC; /* can't do it */ | |
} | |
dptr->flags = dptr->flags | DEV_DIS; /* disable */ | |
} | |
if (dptr->reset) /* reset device */ | |
return dptr->reset (dptr); | |
else return SCPE_OK; | |
} | |
/* Set unit enabled/disabled routine */ | |
t_stat set_unit_enbdis (DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
if (cptr) | |
return SCPE_ARG; | |
if (!(uptr->flags & UNIT_DISABLE)) /* allowed? */ | |
return SCPE_NOFNC; | |
if (flag) /* enb? enable */ | |
uptr->flags = uptr->flags & ~UNIT_DIS; | |
else { | |
if ((uptr->flags & UNIT_ATT) || /* dsb */ | |
sim_is_active (uptr)) /* more tests */ | |
return SCPE_NOFNC; | |
uptr->flags = uptr->flags | UNIT_DIS; /* disable */ | |
} | |
return SCPE_OK; | |
} | |
/* Set device debug enabled/disabled routine */ | |
t_stat set_dev_debug (DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
char gbuf[CBUFSIZE]; | |
DEBTAB *dep; | |
if ((dptr->flags & DEV_DEBUG) == 0) | |
return SCPE_NOFNC; | |
if (cptr == NULL) { /* no arguments? */ | |
dptr->dctrl = flag; /* disable/enable w/o table */ | |
if (flag && dptr->debflags) { /* enable with table? */ | |
for (dep = dptr->debflags; dep->name != NULL; dep++) | |
dptr->dctrl = dptr->dctrl | dep->mask; /* set all */ | |
} | |
return SCPE_OK; | |
} | |
if (dptr->debflags == NULL) /* must have table */ | |
return SCPE_ARG; | |
while (*cptr) { | |
cptr = get_glyph (cptr, gbuf, ';'); /* get debug flag */ | |
for (dep = dptr->debflags; dep->name != NULL; dep++) { | |
if (strcmp (dep->name, gbuf) == 0) { /* match? */ | |
if (flag) | |
dptr->dctrl = dptr->dctrl | dep->mask; | |
else dptr->dctrl = dptr->dctrl & ~dep->mask; | |
break; | |
} | |
} /* end for */ | |
if (dep->mask == 0) /* no match? */ | |
return SCPE_ARG; | |
} /* end while */ | |
return SCPE_OK; | |
} | |
/* Show command */ | |
t_stat show_cmd (int32 flag, char *cptr) | |
{ | |
t_stat r; | |
cptr = get_sim_opt (CMD_OPT_SW|CMD_OPT_OF, cptr, &r); /* get sw, ofile */ | |
if (!cptr) /* error? */ | |
return r; | |
if (sim_ofile) { /* output file? */ | |
r = show_cmd_fi (sim_ofile, flag, cptr); /* do show */ | |
fclose (sim_ofile); | |
} | |
else { | |
r = show_cmd_fi (stdout, flag, cptr); /* no, stdout, log */ | |
if (sim_log) | |
show_cmd_fi (sim_log, flag, cptr); | |
} | |
return r; | |
} | |
t_stat show_cmd_fi (FILE *ofile, int32 flag, char *cptr) | |
{ | |
uint32 lvl = 0xFFFFFFFF; | |
char gbuf[CBUFSIZE], *cvptr; | |
DEVICE *dptr; | |
UNIT *uptr; | |
MTAB *mptr; | |
SHTAB *shtb = NULL, *shptr; | |
static SHTAB show_glob_tab[] = { | |
{ "CONFIGURATION", &show_config, 0 }, | |
{ "DEVICES", &show_config, 1 }, | |
{ "FEATURES", &show_config, 2 }, | |
{ "QUEUE", &show_queue, 0 }, | |
{ "TIME", &show_time, 0 }, | |
{ "MODIFIERS", &show_mod_names, 0 }, | |
{ "NAMES", &show_log_names, 0 }, | |
{ "SHOW", &show_show_commands, 0 }, | |
{ "VERSION", &show_version, 1 }, | |
{ "DEFAULT", &show_default, 0 }, | |
{ "CONSOLE", &sim_show_console, 0 }, | |
{ "REMOTE", &sim_show_remote_console, 0 }, | |
{ "BREAK", &show_break, 0 }, | |
{ "LOG", &sim_show_log, 0 }, /* deprecated */ | |
{ "TELNET", &sim_show_telnet, 0 }, /* deprecated */ | |
{ "DEBUG", &sim_show_debug, 0 }, /* deprecated */ | |
{ "THROTTLE", &sim_show_throt, 0 }, | |
{ "ASYNCH", &sim_show_asynch, 0 }, | |
{ "ETHERNET", ð_show_devices, 0 }, | |
{ "SERIAL", &sim_show_serial, 0 }, | |
{ "MULTIPLEXER", &tmxr_show_open_devices, 0 }, | |
{ "MUX", &tmxr_show_open_devices, 0 }, | |
{ "CLOCKS", &sim_show_timers, 0 }, | |
{ "ON", &show_on, 0 }, | |
{ NULL, NULL, 0 } | |
}; | |
static SHTAB show_dev_tab[] = { | |
{ "RADIX", &show_dev_radix, 0 }, | |
{ "DEBUG", &show_dev_debug, 0 }, | |
{ "MODIFIERS", &show_dev_modifiers, 0 }, | |
{ "NAMES", &show_dev_logicals, 0 }, | |
{ "SHOW", &show_dev_show_commands, 0 }, | |
{ NULL, NULL, 0 } | |
}; | |
static SHTAB show_unit_tab[] = { | |
{ NULL, NULL, 0 } | |
}; | |
GET_SWITCHES (cptr); /* get switches */ | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
cptr = get_glyph (cptr, gbuf, 0); /* get next glyph */ | |
if ((dptr = find_dev (gbuf))) { /* device match? */ | |
uptr = dptr->units; /* first unit */ | |
shtb = show_dev_tab; /* global table */ | |
lvl = MTAB_VDV; /* device match */ | |
} | |
else if ((dptr = find_unit (gbuf, &uptr))) { /* unit match? */ | |
if (uptr == NULL) /* invalid unit */ | |
return SCPE_NXUN; | |
if (uptr->flags & UNIT_DIS) /* disabled? */ | |
return SCPE_UDIS; | |
shtb = show_unit_tab; /* global table */ | |
lvl = MTAB_VUN; /* unit match */ | |
} | |
else if ((shptr = find_shtab (show_glob_tab, gbuf))) /* global? */ | |
return shptr->action (ofile, NULL, NULL, shptr->arg, cptr); | |
else { | |
if (sim_dflt_dev->modifiers) | |
for (mptr = sim_dflt_dev->modifiers; mptr->mask != 0; mptr++) { | |
if ((((mptr->mask & MTAB_VDV) == MTAB_VDV) && | |
(mptr->pstring && (MATCH_CMD (gbuf, mptr->pstring) == 0))) || | |
(!(mptr->mask & MTAB_VDV) && (mptr->mstring && (MATCH_CMD (gbuf, mptr->mstring) == 0)))) { | |
dptr = sim_dflt_dev; | |
lvl = MTAB_VDV; /* device match */ | |
cptr -= strlen (gbuf) + 1; | |
while (isspace(*cptr)) | |
++cptr; | |
break; | |
} | |
} | |
if (!dptr) | |
return SCPE_NXDEV; /* no match */ | |
} | |
if (*cptr == 0) { /* now eol? */ | |
return (lvl == MTAB_VDV)? | |
show_device (ofile, dptr, 0): | |
show_unit (ofile, dptr, uptr, -1); | |
} | |
if (dptr->modifiers == NULL) /* any modifiers? */ | |
return SCPE_NOPARAM; | |
while (*cptr != 0) { /* do all mods */ | |
cptr = get_glyph (cptr, gbuf, ','); /* get modifier */ | |
if ((cvptr = strchr (gbuf, '='))) /* = value? */ | |
*cvptr++ = 0; | |
for (mptr = dptr->modifiers; mptr->mask != 0; mptr++) { | |
if (((mptr->mask & MTAB_XTD)? /* right level? */ | |
((mptr->mask & lvl) == lvl): (MTAB_VUN & lvl)) && | |
((mptr->disp && mptr->pstring && /* named disp? */ | |
(MATCH_CMD (gbuf, mptr->pstring) == 0)) | |
// || | |
// ((mptr->mask & MTAB_VAL) && /* named value? */ | |
// mptr->mstring && | |
// (MATCH_CMD (gbuf, mptr->mstring) == 0))) | |
)) { | |
if (cvptr && !(mptr->mask & MTAB_SHP)) | |
return SCPE_ARG; | |
show_one_mod (ofile, dptr, uptr, mptr, cvptr, 1); | |
break; | |
} /* end if */ | |
} /* end for */ | |
if (mptr->mask == 0) { /* no match? */ | |
if (shtb && (shptr = find_shtab (shtb, gbuf))) /* global match? */ | |
shptr->action (ofile, dptr, uptr, shptr->arg, cptr); | |
else return SCPE_ARG; | |
} /* end if */ | |
} /* end while */ | |
return SCPE_OK; | |
} | |
SHTAB *find_shtab (SHTAB *tab, char *gbuf) | |
{ | |
for (; tab->name != NULL; tab++) { | |
if (MATCH_CMD (gbuf, tab->name) == 0) | |
return tab; | |
} | |
return NULL; | |
} | |
/* Show device and unit */ | |
t_stat show_device (FILE *st, DEVICE *dptr, int32 flag) | |
{ | |
uint32 j, udbl, ucnt; | |
UNIT *uptr; | |
int32 toks = 0; | |
fprintf (st, "%s", sim_dname (dptr)); /* print dev name */ | |
if ((flag == 2) && dptr->description) { | |
fprintf (st, "\t%s\n", dptr->description(dptr)); | |
} | |
if (qdisable (dptr)) { /* disabled? */ | |
fprintf (st, "\tdisabled\n"); | |
return SCPE_OK; | |
} | |
for (j = ucnt = udbl = 0; j < dptr->numunits; j++) { /* count units */ | |
uptr = dptr->units + j; | |
if (!(uptr->flags & UNIT_DIS)) /* count enabled units */ | |
ucnt++; | |
else if (uptr->flags & UNIT_DISABLE) | |
udbl++; /* count user-disabled */ | |
} | |
show_all_mods (st, dptr, dptr->units, MTAB_VDV, &toks); /* show dev mods */ | |
if (dptr->numunits == 0) { | |
if (toks) | |
fprintf (st, "\n"); | |
} | |
else { | |
if (ucnt == 0) { | |
fprint_sep (st, &toks); | |
fprintf (st, "all units disabled\n"); | |
} | |
else if ((ucnt > 1) || (udbl > 0)) { | |
fprint_sep (st, &toks); | |
fprintf (st, "%d units\n", ucnt + udbl); | |
} | |
else | |
if ((flag != 2) || !dptr->description || toks) | |
fprintf (st, "\n"); | |
toks = 0; | |
} | |
if (flag) /* dev only? */ | |
return SCPE_OK; | |
for (j = 0; j < dptr->numunits; j++) { /* loop thru units */ | |
uptr = dptr->units + j; | |
if ((uptr->flags & UNIT_DIS) == 0) | |
show_unit (st, dptr, uptr, ucnt + udbl); | |
} | |
return SCPE_OK; | |
} | |
void fprint_sep (FILE *st, int32 *tokens) | |
{ | |
fprintf (st, (*tokens > 0) ? ", " : "\t"); | |
*tokens += 1; | |
} | |
t_stat show_unit (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag) | |
{ | |
int32 u = (int32)(uptr - dptr->units); | |
int32 toks = 0; | |
if (flag > 1) | |
fprintf (st, " %s%d", sim_dname (dptr), u); | |
else if (flag < 0) | |
fprintf (st, "%s%d", sim_dname (dptr), u); | |
if (uptr->flags & UNIT_FIX) { | |
fprint_sep (st, &toks); | |
fprint_capac (st, dptr, uptr); | |
} | |
if (uptr->flags & UNIT_ATT) { | |
fprint_sep (st, &toks); | |
fprintf (st, "attached to %s", uptr->filename); | |
if (uptr->flags & UNIT_RO) | |
fprintf (st, ", read only"); | |
} | |
else { | |
if (uptr->flags & UNIT_ATTABLE) { | |
fprint_sep (st, &toks); | |
fprintf (st, "not attached"); | |
} | |
} | |
show_all_mods (st, dptr, uptr, MTAB_VUN, &toks); /* show unit mods */ | |
if (toks || (flag < 0) || (flag > 1)) | |
fprintf (st, "\n"); | |
return SCPE_OK; | |
} | |
void fprint_capac (FILE *st, DEVICE *dptr, UNIT *uptr) | |
{ | |
t_addr kval = (uptr->flags & UNIT_BINK)? 1024: 1000; | |
t_addr mval = kval * kval; | |
t_addr psize = uptr->capac; | |
char scale, width; | |
if (dptr->flags & DEV_SECTORS) { | |
kval = kval / 512; | |
mval = mval / 512; | |
} | |
if ((dptr->dwidth / dptr->aincr) > 8) | |
width = 'W'; | |
else width = 'B'; | |
if (uptr->capac < (kval * 10)) | |
scale = 0; | |
else if (uptr->capac < (mval * 10)) { | |
scale = 'K'; | |
psize = psize / kval; | |
} | |
else { | |
scale = 'M'; | |
psize = psize / mval; | |
} | |
fprint_val (st, (t_value) psize, 10, T_ADDR_W, PV_LEFT); | |
if (scale) | |
fputc (scale, st); | |
fputc (width, st); | |
return; | |
} | |
/* Show <global name> processors */ | |
t_stat show_version (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
int32 vmaj = SIM_MAJOR, vmin = SIM_MINOR, vpat = SIM_PATCH, vdelt = SIM_DELTA; | |
if (cptr && (*cptr != 0)) | |
return SCPE_2MARG; | |
fprintf (st, "%s simulator V%d.%d-%d", sim_name, vmaj, vmin, vpat); | |
if (vdelt) | |
fprintf (st, " delta %d", vdelt); | |
#if defined (SIM_VERSION_MODE) | |
fprintf (st, " %s", SIM_VERSION_MODE); | |
#endif | |
if (flag) { | |
uint32 idle_capable, os_tick_size; | |
fprintf (st, "\n\tSimulator Framework Capabilities:"); | |
fprintf (st, "\n\t\t%s", sim_si64); | |
fprintf (st, "\n\t\t%s", sim_sa64); | |
fprintf (st, "\n\t\t%s", sim_snet); | |
idle_capable = sim_timer_idle_capable (&os_tick_size); | |
fprintf (st, "\n\t\tIdle/Throttling support is %savailable", ((idle_capable == 0) ? "NOT " : "")); | |
if (sim_disk_vhd_support()) | |
fprintf (st, "\n\t\tVirtual Hard Disk (VHD) support"); | |
if (sim_disk_raw_support()) | |
fprintf (st, "\n\t\tRAW disk and CD/DVD ROM support"); | |
#if defined (SIM_ASYNCH_IO) | |
fprintf (st, "\n\t\tAsynchronous I/O support"); | |
#endif | |
#if defined (SIM_ASYNCH_MUX) | |
fprintf (st, "\n\t\tAsynchronous Multiplexer support"); | |
#endif | |
#if defined (SIM_ASYNCH_CLOCKS) | |
fprintf (st, "\n\t\tAsynchronous Clock support"); | |
#endif | |
fprintf (st, "\n\tHost Platform:"); | |
#if defined (__clang_version__) | |
fprintf (st, "\n\t\tCompiler: clang %s", __clang_version__); | |
#elif defined (__GNUC__) && defined (__VERSION__) | |
fprintf (st, "\n\t\tCompiler: GCC %s", __VERSION__); | |
#elif defined (_MSC_FULL_VER) && defined (_MSC_BUILD) | |
fprintf (st, "\n\t\tCompiler: Microsoft Visual C++ %d.%02d.%05d.%02d", _MSC_FULL_VER/10000000, (_MSC_FULL_VER/100000)%100, _MSC_FULL_VER%100000, _MSC_BUILD); | |
#elif defined (__DECC_VER) | |
fprintf (st, "\n\t\tCompiler: DEC C %c%d.%d-%03d", ("T SV")[((__DECC_VER/10000)%10)-6], __DECC_VER/10000000, (__DECC_VER/100000)%100, __DECC_VER%10000); | |
#elif defined (SIM_COMPILER) | |
#define S_xstr(a) S_str(a) | |
#define S_str(a) #a | |
fprintf (st, "\n\t\tCompiler: %s", S_xstr(SIM_COMPILER)); | |
#undef S_str | |
#undef S_xstr | |
#endif | |
#if defined (__DATE__) && defined (__TIME__) | |
fprintf (st, "\n\t\tSimulator Compiled: %s at %s", __DATE__, __TIME__); | |
#endif | |
fprintf (st, "\n\t\tMemory Access: %s Endian", sim_end ? "Little" : "Big"); | |
fprintf (st, "\n\t\tMemory Pointer Size: %d bits", (int)sizeof(dptr)*8); | |
fprintf (st, "\n\t\t%s", sim_toffset_64 ? "Large File (>2GB) support" : "No Large File support"); | |
#if defined (USE_SIM_VIDEO) | |
fprintf (st, "\n\t\tSDL Video support: %s", vid_version()); | |
#endif | |
fprintf (st, "\n\t\tOS clock tick size: %dms", os_tick_size); | |
#if defined(__VMS) | |
if (1) { | |
char *arch = | |
#if defined(__ia64) | |
"I64"; | |
#elif defined(__ALPHA) | |
"Alpha"; | |
#else | |
"VAX"; | |
#endif | |
fprintf (st, "\n\t\tOS: OpenVMS %s %s", arch, __VMS_VERSION); | |
} | |
#elif defined(_WIN32) | |
fprintf (st, "\n\t\tOS: Windows: "); | |
fflush (st); | |
system ("ver"); | |
system ("echo \t\t%PROCESSOR_IDENTIFIER% - %PROCESSOR_ARCHITECTURE%-%PROCESSOR_ARCHITEW6432%"); | |
#else | |
fprintf (st, "\n\t\tOS: "); | |
fflush (st); | |
system ("uname -a"); | |
#endif | |
} | |
#if defined(SIM_GIT_COMMIT_ID) | |
#define S_xstr(a) S_str(a) | |
#define S_str(a) #a | |
fprintf (st, "%sgit commit id: %8.8s", flag ? "\n " : " ", S_xstr(SIM_GIT_COMMIT_ID)); | |
#undef S_str | |
#undef S_xstr | |
#endif | |
#if defined(SIM_BUILD) | |
#define S_xstr(a) S_str(a) | |
#define S_str(a) #a | |
fprintf (st, "%sBuild: %s", flag ? "\n " : " ", S_xstr(SIM_BUILD)); | |
#undef S_str | |
#undef S_xstr | |
#endif | |
fprintf (st, "\n"); | |
return SCPE_OK; | |
} | |
t_stat show_config (FILE *st, DEVICE *dnotused, UNIT *unotused, int32 flag, char *cptr) | |
{ | |
int32 i; | |
DEVICE *dptr; | |
t_bool only_enabled = (sim_switches & SWMASK ('E')); | |
if (cptr && (*cptr != 0)) | |
return SCPE_2MARG; | |
fprintf (st, "%s simulator configuration%s\n\n", sim_name, only_enabled ? " (enabled devices)" : ""); | |
for (i = 0; (dptr = sim_devices[i]) != NULL; i++) | |
if (!only_enabled || !qdisable (dptr)) | |
show_device (st, dptr, flag); | |
return SCPE_OK; | |
} | |
t_stat show_log_names (FILE *st, DEVICE *dnotused, UNIT *unotused, int32 flag, char *cptr) | |
{ | |
int32 i; | |
DEVICE *dptr; | |
if (cptr && (*cptr != 0)) | |
return SCPE_2MARG; | |
for (i = 0; (dptr = sim_devices[i]) != NULL; i++) | |
show_dev_logicals (st, dptr, NULL, 1, cptr); | |
return SCPE_OK; | |
} | |
t_stat show_dev_logicals (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
if (dptr->lname) | |
fprintf (st, "%s -> %s\n", dptr->lname, dptr->name); | |
else if (!flag) | |
fputs ("no logical name assigned\n", st); | |
return SCPE_OK; | |
} | |
t_stat show_queue (FILE *st, DEVICE *dnotused, UNIT *unotused, int32 flag, char *cptr) | |
{ | |
DEVICE *dptr; | |
UNIT *uptr; | |
int32 accum; | |
if (cptr && (*cptr != 0)) | |
return SCPE_2MARG; | |
if (sim_clock_queue == QUEUE_LIST_END) | |
fprintf (st, "%s event queue empty, time = %.0f, executing %.0f instructios/sec\n", | |
sim_name, sim_time, sim_timer_inst_per_sec ()); | |
else { | |
fprintf (st, "%s event queue status, time = %.0f, executing %.0f instructions/sec\n", | |
sim_name, sim_time, sim_timer_inst_per_sec ()); | |
accum = 0; | |
for (uptr = sim_clock_queue; uptr != QUEUE_LIST_END; uptr = uptr->next) { | |
if (uptr == &sim_step_unit) | |
fprintf (st, " Step timer"); | |
else if ((dptr = find_dev_from_unit (uptr)) != NULL) { | |
fprintf (st, " %s", sim_dname (dptr)); | |
if (dptr->numunits > 1) | |
fprintf (st, " unit %d", (int32) (uptr - dptr->units)); | |
} | |
else fprintf (st, " Unknown"); | |
fprintf (st, " at %d\n", accum + uptr->time); | |
accum = accum + uptr->time; | |
} | |
} | |
#if defined (SIM_ASYNCH_IO) | |
pthread_mutex_lock (&sim_timer_lock); | |
if (sim_wallclock_queue == QUEUE_LIST_END) | |
fprintf (st, "%s wall clock event queue empty, time = %.0f\n", | |
sim_name, sim_time); | |
else { | |
fprintf (st, "%s wall clock event queue status, time = %.0f\n", | |
sim_name, sim_time); | |
for (uptr = sim_wallclock_queue; uptr != QUEUE_LIST_END; uptr = uptr->a_next) { | |
if ((dptr = find_dev_from_unit (uptr)) != NULL) { | |
fprintf (st, " %s", sim_dname (dptr)); | |
if (dptr->numunits > 1) | |
fprintf (st, " unit %d", (int32) (uptr - dptr->units)); | |
} | |
else fprintf (st, " Unknown"); | |
fprintf (st, " after "); | |
fprint_val (st, (t_value)uptr->a_usec_delay, 10, 0, PV_RCOMMA); | |
fprintf (st, " usec\n"); | |
} | |
} | |
if (sim_clock_cosched_queue != QUEUE_LIST_END) { | |
fprintf (st, "%s clock (%s) co-schedule event queue status, time = %.0f\n", | |
sim_name, sim_uname(sim_clock_unit), sim_time); | |
for (uptr = sim_clock_cosched_queue; uptr != QUEUE_LIST_END; uptr = uptr->a_next) { | |
if ((dptr = find_dev_from_unit (uptr)) != NULL) { | |
fprintf (st, " %s", sim_dname (dptr)); | |
if (dptr->numunits > 1) | |
fprintf (st, " unit %d", (int32) (uptr - dptr->units)); | |
} | |
else fprintf (st, " Unknown"); | |
fprintf (st, "\n"); | |
} | |
} | |
pthread_mutex_unlock (&sim_timer_lock); | |
pthread_mutex_lock (&sim_asynch_lock); | |
fprintf (st, "asynchronous pending event queue\n"); | |
if (sim_asynch_queue == QUEUE_LIST_END) | |
fprintf (st, " Empty\n"); | |
else { | |
for (uptr = sim_asynch_queue; uptr != QUEUE_LIST_END; uptr = uptr->a_next) { | |
if ((dptr = find_dev_from_unit (uptr)) != NULL) { | |
fprintf (st, " %s", sim_dname (dptr)); | |
if (dptr->numunits > 1) fprintf (st, " unit %d", | |
(int32) (uptr - dptr->units)); | |
} | |
else fprintf (st, " Unknown"); | |
fprintf (st, " event delay %d\n", uptr->a_event_time); | |
} | |
} | |
fprintf (st, "asynch latency: %d nanoseconds\n", sim_asynch_latency); | |
fprintf (st, "asynch instruction latency: %d instructions\n", sim_asynch_inst_latency); | |
pthread_mutex_unlock (&sim_asynch_lock); | |
#endif /* SIM_ASYNCH_IO */ | |
return SCPE_OK; | |
} | |
t_stat show_time (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
if (cptr && (*cptr != 0)) | |
return SCPE_2MARG; | |
fprintf (st, "Time:\t%.0f\n", sim_time); | |
return SCPE_OK; | |
} | |
t_stat show_break (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
t_stat r; | |
if (cptr && (*cptr != 0)) | |
r = ssh_break (st, cptr, 1); /* more? */ | |
else r = sim_brk_showall (st, sim_switches); | |
return r; | |
} | |
t_stat show_dev_radix (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
fprintf (st, "Radix=%d\n", dptr->dradix); | |
return SCPE_OK; | |
} | |
t_stat show_dev_debug (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
int32 any = 0; | |
DEBTAB *dep; | |
if (dptr->flags & DEV_DEBUG) { | |
if (dptr->dctrl == 0) | |
fputs ("Debugging disabled", st); | |
else if (dptr->debflags == NULL) | |
fputs ("Debugging enabled", st); | |
else { | |
fputs ("Debug=", st); | |
for (dep = dptr->debflags; dep->name != NULL; dep++) { | |
if (dptr->dctrl & dep->mask) { | |
if (any) | |
fputc (';', st); | |
fputs (dep->name, st); | |
any = 1; | |
} | |
} | |
} | |
fputc ('\n', st); | |
return SCPE_OK; | |
} | |
else return SCPE_NOFNC; | |
} | |
/* Show On actions */ | |
t_stat show_on (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
int32 lvl, i; | |
if (cptr && (*cptr != 0)) return SCPE_2MARG; /* now eol? */ | |
for (lvl=sim_do_depth; lvl >= 0; --lvl) { | |
if (lvl > 0) | |
fprintf(st, "On Processing at Do Nest Level: %d", lvl); | |
else | |
fprintf(st, "On Processing for input commands"); | |
fprintf(st, " is %s\n", (sim_on_check[lvl]) ? "enabled" : "disabled"); | |
for (i=1; i<SCPE_BASE; ++i) { | |
if (sim_on_actions[lvl][i]) | |
fprintf(st, " on %5d %s\n", i, sim_on_actions[lvl][i]); } | |
for (i=SCPE_BASE; i<=SCPE_MAX_ERR; ++i) { | |
if (sim_on_actions[lvl][i]) | |
fprintf(st, " on %-5s %s\n", scp_errors[i-SCPE_BASE].code, sim_on_actions[lvl][i]); } | |
if (sim_on_actions[lvl][0]) | |
fprintf(st, " on ERROR %s\n", sim_on_actions[lvl][0]); | |
fprintf(st, "\n"); | |
} | |
if (sim_on_inherit) | |
fprintf(st, "on state and actions are inherited by nested do commands and subroutines\n"); | |
return SCPE_OK; | |
} | |
/* Show modifiers */ | |
t_stat show_mod_names (FILE *st, DEVICE *dnotused, UNIT *unotused, int32 flag, char *cptr) | |
{ | |
int32 i; | |
DEVICE *dptr; | |
if (cptr && (*cptr != 0)) /* now eol? */ | |
return SCPE_2MARG; | |
for (i = 0; (dptr = sim_devices[i]) != NULL; i++) | |
show_dev_modifiers (st, dptr, NULL, flag, cptr); | |
for (i = 0; sim_internal_device_count && (dptr = sim_internal_devices[i]); ++i) | |
show_dev_modifiers (st, dptr, NULL, flag, cptr); | |
return SCPE_OK; | |
} | |
t_stat show_dev_modifiers (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
fprint_set_help (st, dptr); | |
return SCPE_OK; | |
} | |
t_stat show_all_mods (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, int32 *toks) | |
{ | |
MTAB *mptr; | |
if (dptr->modifiers == NULL) | |
return SCPE_OK; | |
for (mptr = dptr->modifiers; mptr->mask != 0; mptr++) { | |
if (mptr->pstring && | |
((mptr->mask & MTAB_XTD)? | |
(MODMASK(mptr,flag) && !MODMASK(mptr,MTAB_NMO)): | |
((MTAB_VUN == (uint32)flag) && ((uptr->flags & mptr->mask) == mptr->match)))) { | |
if (*toks > 2) { | |
fprintf (st, "\n"); | |
*toks = 0; | |
} | |
fprint_sep (st, toks); | |
show_one_mod (st, dptr, uptr, mptr, NULL, 0); | |
} | |
} | |
return SCPE_OK; | |
} | |
t_stat show_one_mod (FILE *st, DEVICE *dptr, UNIT *uptr, MTAB *mptr, | |
char *cptr, int32 flag) | |
{ | |
//t_value val; | |
if (mptr->disp) | |
mptr->disp (st, uptr, mptr->match, cptr? cptr: mptr->desc); | |
//else if ((mptr->mask & MTAB_XTD) && (mptr->mask & MTAB_VAL)) { | |
// REG *rptr = (REG *) mptr->desc; | |
// fprintf (st, "%s=", mptr->pstring); | |
// val = get_rval (rptr, 0); | |
// fprint_val (st, val, rptr->radix, rptr->width, | |
// rptr->flags & REG_FMT); | |
// } | |
else fputs (mptr->pstring, st); | |
if (flag && !((mptr->mask & MTAB_XTD) && MODMASK(mptr,MTAB_NMO))) | |
fputc ('\n', st); | |
return SCPE_OK; | |
} | |
/* Show show commands */ | |
t_stat show_show_commands (FILE *st, DEVICE *dnotused, UNIT *unotused, int32 flag, char *cptr) | |
{ | |
int32 i; | |
DEVICE *dptr; | |
if (cptr && (*cptr != 0)) /* now eol? */ | |
return SCPE_2MARG; | |
for (i = 0; (dptr = sim_devices[i]) != NULL; i++) | |
show_dev_show_commands (st, dptr, NULL, flag, cptr); | |
for (i = 0; sim_internal_device_count && (dptr = sim_internal_devices[i]); ++i) | |
show_dev_show_commands (st, dptr, NULL, flag, cptr); | |
return SCPE_OK; | |
} | |
t_stat show_dev_show_commands (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
fprint_show_help (st, dptr); | |
return SCPE_OK; | |
} | |
/* Show/change the current working directiory commands */ | |
t_stat show_default (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
char buffer[PATH_MAX]; | |
char *wd = getcwd(buffer, PATH_MAX); | |
fprintf (st, "%s\n", wd); | |
return SCPE_OK; | |
} | |
t_stat set_default_cmd (int32 flg, char *cptr) | |
{ | |
if (sim_is_running) | |
return SCPE_INVREM; | |
if ((!cptr) || (*cptr == 0)) | |
return SCPE_2FARG; | |
sim_trim_endspc(cptr); | |
if (chdir(cptr) != 0) { | |
printf("Unable to change to: %s\n", cptr); | |
return SCPE_IOERR & SCPE_NOMESSAGE; | |
} | |
return SCPE_OK; | |
} | |
t_stat pwd_cmd (int32 flg, char *cptr) | |
{ | |
return show_cmd (0, "DEFAULT"); | |
} | |
#if defined (_WIN32) | |
t_stat dir_cmd (int32 flg, char *cptr) | |
{ | |
HANDLE hFind; | |
WIN32_FIND_DATAA File; | |
struct stat filestat; | |
char WildName[PATH_MAX + 1]; | |
if (*cptr == '\0') | |
cptr = "./*"; | |
if ((!stat (cptr, &filestat)) && (filestat.st_mode & S_IFDIR)) { | |
sprintf (WildName, "%s%c*", cptr, strchr (cptr, '/') ? '/' : '\\'); | |
cptr = WildName; | |
} | |
if ((hFind = FindFirstFileA (cptr, &File)) != INVALID_HANDLE_VALUE) { | |
t_int64 FileSize, TotalSize = 0; | |
int DirCount = 0, FileCount = 0; | |
char DirName[PATH_MAX + 1], FileName[PATH_MAX + 1]; | |
char *c, pathsep = '/'; | |
struct tm *local; | |
GetFullPathNameA(cptr, sizeof(DirName), DirName, &c); | |
c = strrchr(DirName, pathsep); | |
if (NULL == c) { | |
pathsep = '\\'; | |
c = strrchr(cptr, pathsep); | |
} | |
if (c) { | |
memcpy(DirName, cptr, c - cptr); | |
DirName[c - cptr] = '\0'; | |
} | |
else { | |
getcwd(DirName, PATH_MAX); | |
} | |
printf (" Directory of %s\n\n", DirName); | |
if (sim_log) | |
fprintf (sim_log, " Directory of %s\n\n", DirName); | |
do { | |
FileSize = (((t_int64)(File.nFileSizeHigh)) << 32) | File.nFileSizeLow; | |
sprintf (FileName, "%s%c%s", DirName, pathsep, File.cFileName); | |
stat (FileName, &filestat); | |
local = localtime (&filestat.st_mtime); | |
printf ("%02d/%02d/%04d %02d:%02d %s ", local->tm_mon+1, local->tm_mday, 1900+local->tm_year, local->tm_hour%12, local->tm_min, (local->tm_hour >= 12) ? "PM" : "AM"); | |
if (sim_log) | |
fprintf (sim_log, "%02d/%02d/%04d %02d:%02d %s ", local->tm_mon+1, local->tm_mday, 1900+local->tm_year, local->tm_hour%12, local->tm_min, (local->tm_hour >= 12) ? "PM" : "AM"); | |
if (filestat.st_mode & S_IFDIR) { | |
++DirCount; | |
printf (" <DIR> "); | |
if (sim_log) | |
fprintf (sim_log, " <DIR> "); | |
} | |
else { | |
if (filestat.st_mode & S_IFREG) { | |
++FileCount; | |
fprint_val (stdout, (t_value) FileSize, 10, 17, PV_RCOMMA); | |
if (sim_log) | |
fprint_val (sim_log, (t_value) FileSize, 10, 17, PV_RCOMMA); | |
TotalSize += FileSize; | |
} | |
else { | |
printf ("%17s", ""); | |
if (sim_log) | |
fprintf (sim_log, "%17s", ""); | |
} | |
} | |
printf (" %s\n", File.cFileName); | |
if (sim_log) | |
fprintf (sim_log, " %s\n", File.cFileName); | |
} while (FindNextFile (hFind, &File)); | |
printf ("%16d File(s)", FileCount); | |
fprint_val (stdout, (t_value) TotalSize, 10, 15, PV_RCOMMA); | |
printf (" bytes\n"); | |
printf ("%16d Dir(s)\n", DirCount); | |
if (sim_log) { | |
fprintf (sim_log, "%16d File(s)", FileCount); | |
fprint_val (sim_log, (t_value) TotalSize, 10, 15, PV_RCOMMA); | |
fprintf (sim_log, " bytes\n"); | |
fprintf (sim_log, "%16d Dir(s)\n", DirCount); | |
} | |
FindClose (hFind); | |
} | |
else { | |
printf ("Can't list files for %s\n", cptr); | |
if (sim_log) | |
fprintf (sim_log, "Can't list files for %s\n", cptr); | |
return SCPE_ARG; | |
} | |
return SCPE_OK; | |
} | |
#else /* !defined (_WIN32) */ | |
#if defined (HAVE_GLOB) | |
#include <glob.h> | |
#else /* !defined (HAVE_GLOB) */ | |
#include <dirent.h> | |
#if defined (HAVE_FNMATCH) | |
#include <fnmatch.h> | |
#endif | |
#endif /* defined (HAVE_GLOB) */ | |
t_stat dir_cmd (int32 flg, char *cptr) | |
{ | |
#if defined (HAVE_GLOB) | |
glob_t paths; | |
#else | |
DIR *dir; | |
#endif | |
struct stat filestat; | |
char *c; | |
char DirName[PATH_MAX + 1], WholeName[PATH_MAX + 1], WildName[PATH_MAX + 1]; | |
if (*cptr == '\0') | |
cptr = "./*"; | |
strcpy (WildName, cptr); | |
cptr = WildName; | |
while (strlen(WildName) && isspace(WildName[strlen(WildName)-1])) | |
WildName[strlen(WildName)-1] = '\0'; | |
if ((!stat (WildName, &filestat)) && (filestat.st_mode & S_IFDIR)) | |
strcat (WildName, "/*"); | |
if ((*cptr != '/') || (0 == memcmp (cptr, "./", 2)) || (0 == memcmp (cptr, "../", 3))) { | |
#if defined (VMS) | |
getcwd (WholeName, PATH_MAX, 0); | |
#else | |
getcwd (WholeName, PATH_MAX); | |
#endif | |
strcat (WholeName, "/"); | |
strcat (WholeName, cptr); | |
while (strlen(WholeName) && isspace(WholeName[strlen(WholeName)-1])) | |
WholeName[strlen(WholeName)-1] = '\0'; | |
} | |
while ((c = strstr (WholeName, "/./"))) | |
strcpy (c + 1, c + 3); | |
while ((c = strstr (WholeName, "//"))) | |
strcpy (c + 1, c + 2); | |
while ((c = strstr (WholeName, "/../"))) { | |
char *c1; | |
c1 = c - 1; | |
while ((c1 >= WholeName) && (*c1 != '/')) | |
c1 = c1 - 1; | |
strcpy (c1, c + 3); | |
while (0 == memcmp (WholeName, "/../", 4)) | |
strcpy (WholeName, WholeName+3); | |
} | |
c = strrchr (WholeName, '/'); | |
if (c) { | |
memcpy (DirName, WholeName, c-WholeName); | |
DirName[c-WholeName] = '\0'; | |
} | |
else | |
#if defined (VMS) | |
getcwd (WholeName, PATH_MAX, 0); | |
#else | |
getcwd (WholeName, PATH_MAX); | |
#endif | |
cptr = WholeName; | |
#if defined (HAVE_GLOB) | |
memset (&paths, 0, sizeof(paths)); | |
if (0 == glob (cptr, 0, NULL, &paths)) { | |
#else | |
dir = opendir(DirName[0] ? DirName : "/."); | |
if (dir) { | |
struct dirent *ent; | |
#endif | |
t_offset FileSize, TotalSize = 0; | |
int DirCount = 0, FileCount = 0; | |
char FileName[PATH_MAX + 1], *MatchName; | |
char *c; | |
struct tm *local; | |
int i; | |
MatchName = 1 + strrchr (cptr, '/'); | |
printf (" Directory of %s\n\n", DirName[0] ? DirName : "/"); | |
if (sim_log) | |
fprintf (sim_log, " Directory of %s\n\n", DirName[0] ? DirName : "/"); | |
#if defined (HAVE_GLOB) | |
for (i=0; i<paths.gl_pathc; i++) { | |
sprintf (FileName, "%s", paths.gl_pathv[i]); | |
#else | |
while ((ent = readdir (dir))) { | |
#if defined (HAVE_FNMATCH) | |
if (fnmatch(MatchName, ent->d_name, 0)) | |
continue; | |
#endif | |
sprintf (FileName, "%s/%s", DirName, ent->d_name); | |
#endif | |
stat (FileName, &filestat); | |
local = localtime (&filestat.st_mtime); | |
printf ("%02d/%02d/%04d %02d:%02d %s ", local->tm_mon+1, local->tm_mday, 1900+local->tm_year, local->tm_hour%12, local->tm_min, (local->tm_hour >= 12) ? "PM" : "AM"); | |
if (sim_log) | |
fprintf (sim_log, "%02d/%02d/%04d %02d:%02d %s ", local->tm_mon+1, local->tm_mday, 1900+local->tm_year, local->tm_hour%12, local->tm_min, (local->tm_hour >= 12) ? "PM" : "AM"); | |
if (filestat.st_mode & S_IFDIR) { | |
++DirCount; | |
printf (" <DIR> "); | |
if (sim_log) | |
fprintf (sim_log, " <DIR> "); | |
} | |
else { | |
if (filestat.st_mode & S_IFREG) { | |
++FileCount; | |
FileSize = sim_fsize_name_ex (FileName); | |
fprint_val (stdout, (t_value) FileSize, 10, 17, PV_RCOMMA); | |
if (sim_log) | |
fprint_val (sim_log, (t_value) FileSize, 10, 17, PV_RCOMMA); | |
TotalSize += FileSize; | |
} | |
else { | |
printf ("%17s", ""); | |
if (sim_log) | |
fprintf (sim_log, "%17s", ""); | |
} | |
} | |
c = strrchr (FileName, '/'); | |
printf (" %s\n", c ? c + 1 : FileName); | |
if (sim_log) | |
fprintf (sim_log, " %s\n", c ? c + 1 : FileName); | |
} | |
if (FileCount) { | |
printf ("%16d File(s)", FileCount); | |
fprint_val (stdout, (t_value) TotalSize, 10, 15, PV_RCOMMA); | |
printf (" bytes\n"); | |
printf ("%16d Dir(s)\n", DirCount); | |
if (sim_log) { | |
fprintf (sim_log, "%16d File(s)", FileCount); | |
fprint_val (sim_log, (t_value) TotalSize, 10, 15, PV_RCOMMA); | |
fprintf (sim_log, " bytes\n"); | |
fprintf (sim_log, "%16d Dir(s)\n", DirCount); | |
} | |
} | |
else { | |
printf ("File Not Found\n"); | |
if (sim_log) | |
fprintf (sim_log, "File Not Found\n"); | |
} | |
#if defined (HAVE_GLOB) | |
globfree (&paths); | |
#else | |
closedir (dir); | |
#endif | |
} | |
else { | |
printf ("Can't list files for %s\n", cptr); | |
if (sim_log) | |
fprintf (sim_log, "Can't list files for %s\n", cptr); | |
return SCPE_ARG; | |
} | |
return SCPE_OK; | |
} | |
#endif /* !defined(_WIN32) */ | |
/* Breakpoint commands */ | |
t_stat brk_cmd (int32 flg, char *cptr) | |
{ | |
GET_SWITCHES (cptr); /* get switches */ | |
return ssh_break (NULL, cptr, flg); /* call common code */ | |
} | |
t_stat ssh_break (FILE *st, char *cptr, int32 flg) | |
{ | |
char gbuf[CBUFSIZE], *tptr, *t1ptr, *aptr; | |
DEVICE *dptr = sim_dflt_dev; | |
UNIT *uptr = dptr->units; | |
t_stat r; | |
t_addr lo, hi, max = uptr->capac - 1; | |
int32 cnt; | |
if (sim_brk_types == 0) | |
return SCPE_NOFNC; | |
if ((dptr == NULL) || (uptr == NULL)) | |
return SCPE_IERR; | |
if ((aptr = strchr (cptr, ';'))) { /* ;action? */ | |
if (flg != SSH_ST) /* only on SET */ | |
return SCPE_ARG; | |
*aptr++ = 0; /* separate strings */ | |
} | |
if (*cptr == 0) { /* no argument? */ | |
lo = (t_addr) get_rval (sim_PC, 0); /* use PC */ | |
return ssh_break_one (st, flg, lo, 0, aptr); | |
} | |
while (*cptr) { | |
cptr = get_glyph (cptr, gbuf, ','); | |
tptr = get_range (dptr, gbuf, &lo, &hi, dptr->aradix, max, 0); | |
if (tptr == NULL) | |
return SCPE_ARG; | |
if (*tptr == '[') { | |
cnt = (int32) strtotv (tptr + 1, &t1ptr, 10); | |
if ((tptr == t1ptr) || (*t1ptr != ']') || (flg != SSH_ST)) | |
return SCPE_ARG; | |
tptr = t1ptr + 1; | |
} | |
else cnt = 0; | |
if (*tptr != 0) | |
return SCPE_ARG; | |
if ((lo == 0) && (hi == max)) { | |
if (flg == SSH_CL) | |
sim_brk_clrall (sim_switches); | |
else if (flg == SSH_SH) | |
sim_brk_showall (st, sim_switches); | |
else return SCPE_ARG; | |
} | |
else { | |
for ( ; lo <= hi; lo = lo + 1) { | |
r = ssh_break_one (st, flg, lo, cnt, aptr); | |
if (r != SCPE_OK) | |
return r; | |
} | |
} | |
} | |
return SCPE_OK; | |
} | |
t_stat ssh_break_one (FILE *st, int32 flg, t_addr lo, int32 cnt, char *aptr) | |
{ | |
switch (flg) { | |
case SSH_ST: | |
return sim_brk_set (lo, sim_switches, cnt, aptr); | |
break; | |
case SSH_CL: | |
return sim_brk_clr (lo, sim_switches); | |
break; | |
case SSH_SH: | |
return sim_brk_show (st, lo, sim_switches); | |
break; | |
default: | |
return SCPE_ARG; | |
} | |
} | |
/* Reset command and routines | |
re[set] reset all devices | |
re[set] all reset all devices | |
re[set] device reset specific device | |
*/ | |
t_stat reset_cmd (int32 flag, char *cptr) | |
{ | |
char gbuf[CBUFSIZE]; | |
DEVICE *dptr; | |
GET_SWITCHES (cptr); /* get switches */ | |
if (*cptr == 0) /* reset(cr) */ | |
return (reset_all (0)); | |
cptr = get_glyph (cptr, gbuf, 0); /* get next glyph */ | |
if (*cptr != 0) /* now eol? */ | |
return SCPE_2MARG; | |
if (strcmp (gbuf, "ALL") == 0) | |
return (reset_all (0)); | |
dptr = find_dev (gbuf); /* locate device */ | |
if (dptr == NULL) /* found it? */ | |
return SCPE_NXDEV; | |
if (dptr->reset != NULL) | |
return dptr->reset (dptr); | |
else return SCPE_OK; | |
} | |
/* Reset devices start..end | |
Inputs: | |
start = number of starting device | |
Outputs: | |
status = error status | |
*/ | |
t_stat reset_all (uint32 start) | |
{ | |
DEVICE *dptr; | |
uint32 i; | |
t_stat reason; | |
for (i = 0; i < start; i++) { | |
if (sim_devices[i] == NULL) | |
return SCPE_IERR; | |
} | |
for (i = start; (dptr = sim_devices[i]) != NULL; i++) { | |
if (dptr->reset != NULL) { | |
reason = dptr->reset (dptr); | |
if (reason != SCPE_OK) | |
return reason; | |
} | |
} | |
for (i = 0; sim_internal_device_count && (dptr = sim_internal_devices[i]); ++i) { | |
if (dptr->reset != NULL) { | |
reason = dptr->reset (dptr); | |
if (reason != SCPE_OK) | |
return reason; | |
} | |
} | |
return SCPE_OK; | |
} | |
/* Reset to powerup state | |
Inputs: | |
start = number of starting device | |
Outputs: | |
status = error status | |
*/ | |
t_stat reset_all_p (uint32 start) | |
{ | |
t_stat r; | |
int32 old_sw = sim_switches; | |
sim_switches = SWMASK ('P'); | |
r = reset_all (start); | |
sim_switches = old_sw; | |
return r; | |
} | |
/* Load and dump commands | |
lo[ad] filename {arg} load specified file | |
du[mp] filename {arg} dump to specified file | |
*/ | |
t_stat load_cmd (int32 flag, char *cptr) | |
{ | |
char gbuf[CBUFSIZE]; | |
FILE *loadfile; | |
t_stat reason; | |
GET_SWITCHES (cptr); /* get switches */ | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
cptr = get_glyph_nc (cptr, gbuf, 0); /* get file name */ | |
loadfile = sim_fopen (gbuf, flag? "wb": "rb"); /* open for wr/rd */ | |
if (loadfile == NULL) | |
return SCPE_OPENERR; | |
GET_SWITCHES (cptr); /* get switches */ | |
reason = sim_load (loadfile, cptr, gbuf, flag); /* load or dump */ | |
fclose (loadfile); | |
return reason; | |
} | |
/* Attach command | |
at[tach] unit file attach specified unit to file | |
*/ | |
t_stat attach_cmd (int32 flag, char *cptr) | |
{ | |
char gbuf[CBUFSIZE]; | |
DEVICE *dptr; | |
UNIT *uptr; | |
t_stat r; | |
GET_SWITCHES (cptr); /* get switches */ | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
cptr = get_glyph (cptr, gbuf, 0); /* get next glyph */ | |
GET_SWITCHES (cptr); /* get switches */ | |
if (*cptr == 0) /* now eol? */ | |
return SCPE_2FARG; | |
dptr = find_unit (gbuf, &uptr); /* locate unit */ | |
if (dptr == NULL) /* found dev? */ | |
return SCPE_NXDEV; | |
if (uptr == NULL) /* valid unit? */ | |
return SCPE_NXUN; | |
if (uptr->flags & UNIT_ATT) /* already attached? */ | |
if (!(uptr->dynflags & UNIT_ATTMULT) && /* and only single attachable */ | |
!(dptr->flags & DEV_DONTAUTO)) { /* and auto detachable */ | |
r = scp_detach_unit (dptr, uptr); /* detach it */ | |
if (r != SCPE_OK) /* error? */ | |
return r; | |
} | |
else | |
if (!(uptr->dynflags & UNIT_ATTMULT)) | |
return SCPE_ALATT; /* Already attached */ | |
sim_trim_endspc (cptr); /* trim trailing spc */ | |
return scp_attach_unit (dptr, uptr, cptr); /* attach */ | |
} | |
/* Call device-specific or file-oriented attach unit routine */ | |
t_stat scp_attach_unit (DEVICE *dptr, UNIT *uptr, char *cptr) | |
{ | |
if (dptr->attach != NULL) /* device routine? */ | |
return dptr->attach (uptr, cptr); /* call it */ | |
return attach_unit (uptr, cptr); /* no, std routine */ | |
} | |
/* Attach unit to file */ | |
t_stat attach_unit (UNIT *uptr, char *cptr) | |
{ | |
DEVICE *dptr; | |
if (uptr->flags & UNIT_DIS) /* disabled? */ | |
return SCPE_UDIS; | |
if (!(uptr->flags & UNIT_ATTABLE)) /* not attachable? */ | |
return SCPE_NOATT; | |
if ((dptr = find_dev_from_unit (uptr)) == NULL) | |
return SCPE_NOATT; | |
uptr->filename = (char *) calloc (CBUFSIZE, sizeof (char)); /* alloc name buf */ | |
if (uptr->filename == NULL) | |
return SCPE_MEM; | |
strncpy (uptr->filename, cptr, CBUFSIZE); /* save name */ | |
if (sim_switches & SWMASK ('R')) { /* read only? */ | |
if ((uptr->flags & UNIT_ROABLE) == 0) /* allowed? */ | |
return attach_err (uptr, SCPE_NORO); /* no, error */ | |
uptr->fileref = sim_fopen (cptr, "rb"); /* open rd only */ | |
if (uptr->fileref == NULL) /* open fail? */ | |
return attach_err (uptr, SCPE_OPENERR); /* yes, error */ | |
uptr->flags = uptr->flags | UNIT_RO; /* set rd only */ | |
if (!sim_quiet) | |
printf ("%s: unit is read only\n", sim_dname (dptr)); | |
} | |
else { | |
if (sim_switches & SWMASK ('N')) { /* new file only? */ | |
uptr->fileref = sim_fopen (cptr, "wb+"); /* open new file */ | |
if (uptr->fileref == NULL) /* open fail? */ | |
return attach_err (uptr, SCPE_OPENERR); /* yes, error */ | |
if (!sim_quiet) | |
printf ("%s: creating new file\n", sim_dname (dptr)); | |
} | |
else { /* normal */ | |
uptr->fileref = sim_fopen (cptr, "rb+"); /* open r/w */ | |
if (uptr->fileref == NULL) { /* open fail? */ | |
#if defined(EPERM) | |
if ((errno == EROFS) || (errno == EACCES) || (errno == EPERM)) {/* read only? */ | |
#else | |
if ((errno == EROFS) || (errno == EACCES)) {/* read only? */ | |
#endif | |
if ((uptr->flags & UNIT_ROABLE) == 0) /* allowed? */ | |
return attach_err (uptr, SCPE_NORO);/* no error */ | |
uptr->fileref = sim_fopen (cptr, "rb"); /* open rd only */ | |
if (uptr->fileref == NULL) /* open fail? */ | |
return attach_err (uptr, SCPE_OPENERR); /* yes, error */ | |
uptr->flags = uptr->flags | UNIT_RO; /* set rd only */ | |
if (!sim_quiet) | |
printf ("%s: unit is read only\n", sim_dname (dptr)); | |
} | |
else { /* doesn't exist */ | |
if (sim_switches & SWMASK ('E')) /* must exist? */ | |
return attach_err (uptr, SCPE_OPENERR); /* yes, error */ | |
uptr->fileref = sim_fopen (cptr, "wb+");/* open new file */ | |
if (uptr->fileref == NULL) /* open fail? */ | |
return attach_err (uptr, SCPE_OPENERR); /* yes, error */ | |
if (!sim_quiet) | |
printf ("%s: creating new file\n", sim_dname (dptr)); | |
} | |
} /* end if null */ | |
} /* end else */ | |
} | |
if (uptr->flags & UNIT_BUFABLE) { /* buffer? */ | |
uint32 cap = ((uint32) uptr->capac) / dptr->aincr; /* effective size */ | |
if (uptr->flags & UNIT_MUSTBUF) /* dyn alloc? */ | |
uptr->filebuf = calloc (cap, SZ_D (dptr)); /* allocate */ | |
if (uptr->filebuf == NULL) /* no buffer? */ | |
return attach_err (uptr, SCPE_MEM); /* error */ | |
if (!sim_quiet) printf ("%s: buffering file in memory\n", sim_dname (dptr)); | |
uptr->hwmark = (uint32)sim_fread (uptr->filebuf, /* read file */ | |
SZ_D (dptr), cap, uptr->fileref); | |
uptr->flags = uptr->flags | UNIT_BUF; /* set buffered */ | |
} | |
uptr->flags = uptr->flags | UNIT_ATT; | |
uptr->pos = 0; | |
return SCPE_OK; | |
} | |
t_stat attach_err (UNIT *uptr, t_stat stat) | |
{ | |
free (uptr->filename); | |
uptr->filename = NULL; | |
return stat; | |
} | |
/* Detach command | |
det[ach] all detach all units | |
det[ach] unit detach specified unit | |
*/ | |
t_stat detach_cmd (int32 flag, char *cptr) | |
{ | |
char gbuf[CBUFSIZE]; | |
DEVICE *dptr; | |
UNIT *uptr; | |
GET_SWITCHES (cptr); /* get switches */ | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
cptr = get_glyph (cptr, gbuf, 0); /* get next glyph */ | |
if (*cptr != 0) /* now eol? */ | |
return SCPE_2MARG; | |
if (strcmp (gbuf, "ALL") == 0) | |
return (detach_all (0, FALSE)); | |
dptr = find_unit (gbuf, &uptr); /* locate unit */ | |
if (dptr == NULL) /* found dev? */ | |
return SCPE_NXDEV; | |
if (uptr == NULL) /* valid unit? */ | |
return SCPE_NXUN; | |
return scp_detach_unit (dptr, uptr); /* detach */ | |
} | |
/* Detach devices start..end | |
Inputs: | |
start = number of starting device | |
shutdown = TRUE if simulator shutting down | |
Outputs: | |
status = error status | |
Note that during shutdown, detach routines for non-attachable devices | |
will be called. These routines can implement simulator shutdown. Error | |
returns during shutdown are ignored. | |
*/ | |
t_stat detach_all (int32 start, t_bool shutdown) | |
{ | |
uint32 i, j; | |
DEVICE *dptr; | |
UNIT *uptr; | |
t_stat r; | |
if ((start < 0) || (start > 1)) | |
return SCPE_IERR; | |
for (i = start; (dptr = sim_devices[i]) != NULL; i++) { /* loop thru dev */ | |
for (j = 0; j < dptr->numunits; j++) { /* loop thru units */ | |
uptr = (dptr->units) + j; | |
if ((uptr->flags & UNIT_ATT) || /* attached? */ | |
(shutdown && dptr->detach && /* shutdown, spec rtn, */ | |
!(uptr->flags & UNIT_ATTABLE))) { /* !attachable? */ | |
r = scp_detach_unit (dptr, uptr); /* detach unit */ | |
if ((r != SCPE_OK) && !shutdown) /* error and not shutting down? */ | |
return r; /* bail out now with error status */ | |
} | |
} | |
} | |
return SCPE_OK; | |
} | |
/* Call device-specific or file-oriented detach unit routine */ | |
t_stat scp_detach_unit (DEVICE *dptr, UNIT *uptr) | |
{ | |
if (dptr->detach != NULL) /* device routine? */ | |
return dptr->detach (uptr); | |
return detach_unit (uptr); /* no, standard */ | |
} | |
/* Detach unit from file */ | |
t_stat detach_unit (UNIT *uptr) | |
{ | |
DEVICE *dptr; | |
if (uptr == NULL) | |
return SCPE_IERR; | |
if (!(uptr->flags & UNIT_ATTABLE)) /* attachable? */ | |
return SCPE_NOATT; | |
if (!(uptr->flags & UNIT_ATT)) { /* not attached? */ | |
if (sim_switches & SIM_SW_REST) /* restoring? */ | |
return SCPE_OK; /* allow detach */ | |
else | |
return SCPE_NOATT; /* complain */ | |
} | |
if ((dptr = find_dev_from_unit (uptr)) == NULL) | |
return SCPE_OK; | |
if (uptr->flags & UNIT_BUF) { | |
uint32 cap = (uptr->hwmark + dptr->aincr - 1) / dptr->aincr; | |
if (uptr->hwmark && ((uptr->flags & UNIT_RO) == 0)) { | |
if (!sim_quiet) | |
printf ("%s: writing buffer to file\n", sim_dname (dptr)); | |
rewind (uptr->fileref); | |
sim_fwrite (uptr->filebuf, SZ_D (dptr), cap, uptr->fileref); | |
if (ferror (uptr->fileref)) | |
perror ("I/O error"); | |
} | |
if (uptr->flags & UNIT_MUSTBUF) { /* dyn alloc? */ | |
free (uptr->filebuf); /* free buf */ | |
uptr->filebuf = NULL; | |
} | |
uptr->flags = uptr->flags & ~UNIT_BUF; | |
} | |
uptr->flags = uptr->flags & ~(UNIT_ATT | UNIT_RO); | |
free (uptr->filename); | |
uptr->filename = NULL; | |
if (fclose (uptr->fileref) == EOF) | |
return SCPE_IOERR; | |
return SCPE_OK; | |
} | |
/* Assign command | |
as[sign] device name assign logical name to device | |
*/ | |
t_stat assign_cmd (int32 flag, char *cptr) | |
{ | |
char gbuf[CBUFSIZE]; | |
DEVICE *dptr; | |
GET_SWITCHES (cptr); /* get switches */ | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
cptr = get_glyph (cptr, gbuf, 0); /* get next glyph */ | |
GET_SWITCHES (cptr); /* get switches */ | |
if (*cptr == 0) /* now eol? */ | |
return SCPE_2FARG; | |
dptr = find_dev (gbuf); /* locate device */ | |
if (dptr == NULL) /* found dev? */ | |
return SCPE_NXDEV; | |
cptr = get_glyph (cptr, gbuf, 0); /* get next glyph */ | |
if (*cptr != 0) /* must be eol */ | |
return SCPE_2MARG; | |
if (find_dev (gbuf)) /* name in use */ | |
return SCPE_ARG; | |
deassign_device (dptr); /* release current */ | |
return assign_device (dptr, gbuf); | |
} | |
t_stat assign_device (DEVICE *dptr, char *cptr) | |
{ | |
dptr->lname = (char *) calloc (CBUFSIZE, sizeof (char)); | |
if (dptr->lname == NULL) | |
return SCPE_MEM; | |
strncpy (dptr->lname, cptr, CBUFSIZE); | |
return SCPE_OK; | |
} | |
/* Deassign command | |
dea[ssign] device deassign logical name | |
*/ | |
t_stat deassign_cmd (int32 flag, char *cptr) | |
{ | |
char gbuf[CBUFSIZE]; | |
DEVICE *dptr; | |
GET_SWITCHES (cptr); /* get switches */ | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
cptr = get_glyph (cptr, gbuf, 0); /* get next glyph */ | |
if (*cptr != 0) /* now eol? */ | |
return SCPE_2MARG; | |
dptr = find_dev (gbuf); /* locate device */ | |
if (dptr == NULL) /* found dev? */ | |
return SCPE_NXDEV; | |
return deassign_device (dptr); | |
} | |
t_stat deassign_device (DEVICE *dptr) | |
{ | |
if (dptr->lname) | |
free (dptr->lname); | |
dptr->lname = NULL; | |
return SCPE_OK; | |
} | |
/* Get device display name */ | |
char *sim_dname (DEVICE *dptr) | |
{ | |
return (dptr->lname? dptr->lname: dptr->name); | |
} | |
/* Get unit display name */ | |
char *sim_uname (UNIT *uptr) | |
{ | |
DEVICE *d = find_dev_from_unit(uptr); | |
static AIO_TLS char uname[CBUFSIZE]; | |
if (!d) | |
return ""; | |
if (d->numunits == 1) | |
return sim_dname (d); | |
sprintf (uname, "%s%d", sim_dname (d), (int)(uptr-d->units)); | |
return uname; | |
} | |
/* Save command | |
sa[ve] filename save state to specified file | |
*/ | |
t_stat save_cmd (int32 flag, char *cptr) | |
{ | |
FILE *sfile; | |
t_stat r; | |
GET_SWITCHES (cptr); /* get switches */ | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
sim_trim_endspc (cptr); | |
if ((sfile = sim_fopen (cptr, "wb")) == NULL) | |
return SCPE_OPENERR; | |
r = sim_save (sfile); | |
fclose (sfile); | |
return r; | |
} | |
t_stat sim_save (FILE *sfile) | |
{ | |
void *mbuf; | |
int32 l, t; | |
uint32 i, j; | |
t_addr k, high; | |
t_value val; | |
t_stat r; | |
t_bool zeroflg; | |
size_t sz; | |
DEVICE *dptr; | |
UNIT *uptr; | |
REG *rptr; | |
#define WRITE_I(xx) sim_fwrite (&(xx), sizeof (xx), 1, sfile) | |
fprintf (sfile, "%s\n%s\n%s\n%s\n%s\n%.0f\n", | |
save_vercur, /* [V2.5] save format */ | |
sim_name, /* sim name */ | |
sim_si64, sim_sa64, sim_snet, /* [V3.5] options */ | |
sim_time); /* [V3.2] sim time */ | |
WRITE_I (sim_rtime); /* [V2.6] sim rel time */ | |
for (i = 0; (dptr = sim_devices[i]) != NULL; i++) { /* loop thru devices */ | |
fputs (dptr->name, sfile); /* device name */ | |
fputc ('\n', sfile); | |
if (dptr->lname) /* [V3.0] logical name */ | |
fputs (dptr->lname, sfile); | |
fputc ('\n', sfile); | |
WRITE_I (dptr->flags); /* [V2.10] flags */ | |
for (j = 0; j < dptr->numunits; j++) { | |
uptr = dptr->units + j; | |
t = sim_activate_time (uptr); | |
WRITE_I (j); /* unit number */ | |
WRITE_I (t); /* activation time */ | |
WRITE_I (uptr->u3); /* unit specific */ | |
WRITE_I (uptr->u4); | |
WRITE_I (uptr->u5); /* [V3.0] more unit */ | |
WRITE_I (uptr->u6); | |
WRITE_I (uptr->flags); /* [V2.10] flags */ | |
WRITE_I (uptr->dynflags); | |
WRITE_I (uptr->capac); /* [V3.5] capacity */ | |
if (uptr->flags & UNIT_ATT) { | |
fputs (uptr->filename, sfile); | |
if ((uptr->flags & UNIT_BUF) && /* writable buffered */ | |
uptr->hwmark && /* files need to be */ | |
((uptr->flags & UNIT_RO) == 0)) { /* written on save */ | |
uint32 cap = (uptr->hwmark + dptr->aincr - 1) / dptr->aincr; | |
rewind (uptr->fileref); | |
sim_fwrite (uptr->filebuf, SZ_D (dptr), cap, uptr->fileref); | |
fclose (uptr->fileref); /* flush data and state */ | |
uptr->fileref = sim_fopen (uptr->filename, "rb+");/* reopen r/w */ | |
} | |
} | |
fputc ('\n', sfile); | |
if (((uptr->flags & (UNIT_FIX + UNIT_ATTABLE)) == UNIT_FIX) && | |
(dptr->examine != NULL) && | |
((high = uptr->capac) != 0)) { /* memory-like unit? */ | |
WRITE_I (high); /* [V2.5] write size */ | |
sz = SZ_D (dptr); | |
if ((mbuf = calloc (SRBSIZ, sz)) == NULL) { | |
fclose (sfile); | |
return SCPE_MEM; | |
} | |
for (k = 0; k < high; ) { /* loop thru mem */ | |
zeroflg = TRUE; | |
for (l = 0; (l < SRBSIZ) && (k < high); l++, | |
k = k + (dptr->aincr)) { /* check for 0 block */ | |
r = dptr->examine (&val, k, uptr, SIM_SW_REST); | |
if (r != SCPE_OK) { | |
free (mbuf); | |
return r; | |
} | |
if (val) zeroflg = FALSE; | |
SZ_STORE (sz, val, mbuf, l); | |
} /* end for l */ | |
if (zeroflg) { /* all zero's? */ | |
l = -l; /* invert block count */ | |
WRITE_I (l); /* write only count */ | |
} | |
else { | |
WRITE_I (l); /* block count */ | |
sim_fwrite (mbuf, sz, l, sfile); | |
} | |
} /* end for k */ | |
free (mbuf); /* dealloc buffer */ | |
} /* end if mem */ | |
else { /* no memory */ | |
high = 0; /* write 0 */ | |
WRITE_I (high); | |
} /* end else mem */ | |
} /* end unit loop */ | |
t = -1; /* end units */ | |
WRITE_I (t); /* write marker */ | |
for (rptr = dptr->registers; (rptr != NULL) && /* loop thru regs */ | |
(rptr->name != NULL); rptr++) { | |
fputs (rptr->name, sfile); /* name */ | |
fputc ('\n', sfile); | |
WRITE_I (rptr->depth); /* [V2.10] depth */ | |
for (j = 0; j < rptr->depth; j++) { /* loop thru values */ | |
val = get_rval (rptr, j); /* get value */ | |
WRITE_I (val); /* store */ | |
} | |
} | |
fputc ('\n', sfile); /* end registers */ | |
} | |
fputc ('\n', sfile); /* end devices */ | |
return (ferror (sfile))? SCPE_IOERR: SCPE_OK; /* error during save? */ | |
} | |
/* Restore command | |
re[store] filename restore state from specified file | |
*/ | |
t_stat restore_cmd (int32 flag, char *cptr) | |
{ | |
FILE *rfile; | |
t_stat r; | |
GET_SWITCHES (cptr); /* get switches */ | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
sim_trim_endspc (cptr); | |
if ((rfile = sim_fopen (cptr, "rb")) == NULL) | |
return SCPE_OPENERR; | |
r = sim_rest (rfile); | |
fclose (rfile); | |
return r; | |
} | |
t_stat sim_rest (FILE *rfile) | |
{ | |
char buf[CBUFSIZE]; | |
char **attnames = NULL; | |
UNIT **attunits = NULL; | |
int32 *attswitches = NULL; | |
int32 attcnt = 0; | |
void *mbuf; | |
int32 j, blkcnt, limit, unitno, time, flg; | |
uint32 us, depth; | |
t_addr k, high, old_capac; | |
t_value val, mask; | |
t_stat r; | |
size_t sz; | |
t_bool v35, v32; | |
DEVICE *dptr; | |
UNIT *uptr; | |
REG *rptr; | |
struct stat rstat; | |
t_bool force_restore = sim_switches & SWMASK ('F'); | |
#define READ_S(xx) if (read_line ((xx), sizeof(xx), rfile) == NULL) \ | |
return SCPE_IOERR; | |
#define READ_I(xx) if (sim_fread (&xx, sizeof (xx), 1, rfile) == 0) \ | |
return SCPE_IOERR; | |
fstat (fileno (rfile), &rstat); | |
READ_S (buf); /* [V2.5+] read version */ | |
v35 = v32 = FALSE; | |
if (strcmp (buf, save_vercur) == 0) /* version 3.5? */ | |
v35 = v32 = TRUE; | |
else if (strcmp (buf, save_ver32) == 0) /* version 3.2? */ | |
v32 = TRUE; | |
else if (strcmp (buf, save_ver30) != 0) { /* version 3.0? */ | |
printf ("Invalid file version: %s\n", buf); | |
if (sim_log) | |
fprintf (sim_log, "Invalid file version: %s\n", buf); | |
return SCPE_INCOMP; | |
} | |
READ_S (buf); /* read sim name */ | |
if (strcmp (buf, sim_name)) { /* name match? */ | |
printf ("Wrong system type: %s\n", buf); | |
if (sim_log) | |
fprintf (sim_log, "Wrong system type: %s\n", buf); | |
return SCPE_INCOMP; | |
} | |
if (v35) { /* [V3.5+] options */ | |
READ_S (buf); /* integer size */ | |
if (strcmp (buf, sim_si64) != 0) { | |
printf ("Incompatible integer size, save file = %s\n", buf); | |
if (sim_log) | |
fprintf (sim_log, "Incompatible integer size, save file = %s\n", buf); | |
return SCPE_INCOMP; | |
} | |
READ_S (buf); /* address size */ | |
if (strcmp (buf, sim_sa64) != 0) { | |
printf ("Incompatible address size, save file = %s\n", buf); | |
if (sim_log) | |
fprintf (sim_log, "Incompatible address size, save file = %s\n", buf); | |
return SCPE_INCOMP; | |
} | |
READ_S (buf); /* Ethernet */ | |
} | |
if (v32) { /* [V3.2+] time as string */ | |
READ_S (buf); | |
sscanf (buf, "%lf", &sim_time); | |
} | |
else READ_I (sim_time); /* sim time */ | |
READ_I (sim_rtime); /* [V2.6+] sim rel time */ | |
detach_all (0, 0); /* Detach everything to start from a consistent state */ | |
for ( ;; ) { /* device loop */ | |
READ_S (buf); /* read device name */ | |
if (buf[0] == 0) /* last? */ | |
break; | |
if ((dptr = find_dev (buf)) == NULL) { /* locate device */ | |
printf ("Invalid device name: %s\n", buf); | |
if (sim_log) | |
fprintf (sim_log, "Invalid device name: %s\n", buf); | |
return SCPE_INCOMP; | |
} | |
READ_S (buf); /* [V3.0+] logical name */ | |
deassign_device (dptr); /* delete old name */ | |
if ((buf[0] != 0) && | |
((r = assign_device (dptr, buf)) != SCPE_OK)) | |
return r; | |
READ_I (flg); /* [V2.10+] ctlr flags */ | |
if (!v32) | |
flg = ((flg & DEV_UFMASK_31) << (DEV_V_UF - DEV_V_UF_31)) | | |
(flg & ~DEV_UFMASK_31); /* [V3.2+] flags moved */ | |
dptr->flags = (dptr->flags & ~DEV_RFLAGS) | /* restore ctlr flags */ | |
(flg & DEV_RFLAGS); | |
for ( ;; ) { /* unit loop */ | |
sim_switches = SIM_SW_REST; /* flag rstr, clr RO */ | |
READ_I (unitno); /* unit number */ | |
if (unitno < 0) /* end units? */ | |
break; | |
if ((uint32) unitno >= dptr->numunits) { /* too big? */ | |
printf ("Invalid unit number: %s%d\n", sim_dname (dptr), unitno); | |
if (sim_log) | |
fprintf (sim_log, "Invalid unit number: %s%d\n", sim_dname (dptr), unitno); | |
return SCPE_INCOMP; | |
} | |
READ_I (time); /* event time */ | |
uptr = (dptr->units) + unitno; | |
sim_cancel (uptr); | |
if (time > 0) | |
sim_activate (uptr, time - 1); | |
READ_I (uptr->u3); /* device specific */ | |
READ_I (uptr->u4); | |
READ_I (uptr->u5); /* [V3.0+] more dev spec */ | |
READ_I (uptr->u6); | |
READ_I (flg); /* [V2.10+] unit flags */ | |
READ_I (uptr->dynflags); | |
old_capac = uptr->capac; /* save current capacity */ | |
if (v35) { /* [V3.5+] capacity */ | |
READ_I (uptr->capac); | |
} | |
if (!v32) | |
flg = ((flg & UNIT_UFMASK_31) << (UNIT_V_UF - UNIT_V_UF_31)) | | |
(flg & ~UNIT_UFMASK_31); /* [V3.2+] flags moved */ | |
uptr->flags = (uptr->flags & ~UNIT_RFLAGS) | | |
(flg & UNIT_RFLAGS); /* restore */ | |
READ_S (buf); /* attached file */ | |
if (uptr->flags & UNIT_ATT) { /* unit currently attached? */ | |
r = scp_detach_unit (dptr, uptr); /* detach it */ | |
if (r != SCPE_OK) | |
return r; | |
} | |
if ((buf[0] != '\0') && /* unit to be reattached? */ | |
((uptr->flags & UNIT_ATTABLE) || /* and unit is attachable */ | |
(dptr->attach != NULL))) { /* or VM attach routine provided? */ | |
uptr->flags = uptr->flags & ~UNIT_DIS; /* ensure device is enabled */ | |
if (flg & UNIT_RO) /* [V2.10+] saved flgs & RO? */ | |
sim_switches |= SWMASK ('R'); /* RO attach */ | |
/* add unit to list of units to attach after registers are read */ | |
attunits = realloc (attunits, sizeof (*attunits)*(attcnt+1)); | |
attunits[attcnt] = uptr; | |
attnames = realloc (attnames, sizeof (*attnames)*(attcnt+1)); | |
attnames[attcnt] = malloc(1+strlen(buf)); | |
strcpy (attnames[attcnt], buf); | |
attswitches = realloc (attswitches, sizeof (*attswitches)*(attcnt+1)); | |
attswitches[attcnt] = sim_switches; | |
++attcnt; | |
} | |
READ_I (high); /* memory capacity */ | |
if (high > 0) { /* [V2.5+] any memory? */ | |
if (((uptr->flags & (UNIT_FIX + UNIT_ATTABLE)) != UNIT_FIX) || | |
(dptr->deposit == NULL)) { | |
printf ("Can't restore memory: %s%d\n", sim_dname (dptr), unitno); | |
if (sim_log) | |
fprintf (sim_log, "Can't restore memory: %s%d\n", sim_dname (dptr), unitno); | |
return SCPE_INCOMP; | |
} | |
if (high != old_capac) { /* size change? */ | |
uptr->capac = old_capac; /* temp restore old */ | |
if ((dptr->flags & DEV_DYNM) && | |
((dptr->msize == NULL) || | |
(dptr->msize (uptr, (int32) high, NULL, NULL) != SCPE_OK))) { | |
printf ("Can't change memory size: %s%d\n", | |
sim_dname (dptr), unitno); | |
if (sim_log) | |
fprintf (sim_log, "Can't change memory size: %s%d\n", | |
sim_dname (dptr), unitno); | |
return SCPE_INCOMP; | |
} | |
uptr->capac = high; /* new memory size */ | |
printf ("Memory size changed: %s%d = ", sim_dname (dptr), unitno); | |
fprint_capac (stdout, dptr, uptr); | |
printf ("\n"); | |
if (sim_log) { | |
fprintf (sim_log, "Memory size changed: %s%d = ", sim_dname (dptr), unitno); | |
fprint_capac (sim_log, dptr, uptr); | |
fprintf (sim_log, "\n"); | |
} | |
} | |
sz = SZ_D (dptr); /* allocate buffer */ | |
if ((mbuf = calloc (SRBSIZ, sz)) == NULL) | |
return SCPE_MEM; | |
for (k = 0; k < high; ) { /* loop thru mem */ | |
if (sim_fread (&blkcnt, sizeof (blkcnt), 1, rfile) == 0) {/* block count */ | |
free (mbuf); | |
return SCPE_IOERR; | |
} | |
if (blkcnt < 0) /* compressed? */ | |
limit = -blkcnt; | |
else limit = (int32)sim_fread (mbuf, sz, blkcnt, rfile); | |
if (limit <= 0) { /* invalid or err? */ | |
free (mbuf); | |
return SCPE_IOERR; | |
} | |
for (j = 0; j < limit; j++, k = k + (dptr->aincr)) { | |
if (blkcnt < 0) /* compressed? */ | |
val = 0; | |
else SZ_LOAD (sz, val, mbuf, j); /* saved value */ | |
r = dptr->deposit (val, k, uptr, SIM_SW_REST); | |
if (r != SCPE_OK) { | |
free (mbuf); | |
return r; | |
} | |
} /* end for j */ | |
} /* end for k */ | |
free (mbuf); /* dealloc buffer */ | |
} /* end if high */ | |
} /* end unit loop */ | |
for ( ;; ) { /* register loop */ | |
READ_S (buf); /* read reg name */ | |
if (buf[0] == 0) /* last? */ | |
break; | |
READ_I (depth); /* [V2.10+] depth */ | |
if ((rptr = find_reg (buf, NULL, dptr)) == NULL) { | |
printf ("Invalid register name: %s %s\n", sim_dname (dptr), buf); | |
if (sim_log) | |
fprintf (sim_log, "Invalid register name: %s %s\n", sim_dname (dptr), buf); | |
for (us = 0; us < depth; us++) { /* skip values */ | |
READ_I (val); | |
} | |
continue; | |
} | |
if (depth != rptr->depth) { /* [V2.10+] mismatch? */ | |
printf ("Register depth mismatch: %s %s, file = %d, sim = %d\n", | |
sim_dname (dptr), buf, depth, rptr->depth); | |
if (sim_log) | |
fprintf (sim_log, "Register depth mismatch: %s %s, file = %d, sim = %d\n", | |
sim_dname (dptr), buf, depth, rptr->depth); | |
} | |
mask = width_mask[rptr->width]; /* get mask */ | |
for (us = 0; us < depth; us++) { /* loop thru values */ | |
READ_I (val); /* read value */ | |
if (val > mask) { /* value ok? */ | |
printf ("Invalid register value: %s %s\n", sim_dname (dptr), buf); | |
if (sim_log) | |
fprintf (sim_log, "Invalid register value: %s %s\n", sim_dname (dptr), buf); | |
} | |
else if (us < rptr->depth) /* in range? */ | |
put_rval (rptr, us, val); | |
} | |
} /* end register loop */ | |
} /* end device loop */ | |
/* Now that all of the register state has been imported, we can attach | |
units which were originally attached. Some of these attach operations | |
may depend on the state of the device (in registers) to work correctly */ | |
for (j=0, r = SCPE_OK; j<attcnt; j++) { | |
if (r == SCPE_OK) { | |
struct stat fstat; | |
dptr = find_dev_from_unit (attunits[j]); | |
if ((!force_restore) && | |
(!stat(attnames[j], &fstat))) | |
if (fstat.st_mtime > rstat.st_mtime + 30) { | |
r = SCPE_INCOMP; | |
printf ("Error Attaching %s to %s - the restore state is %d seconds older than the attach file\n", sim_dname (dptr), attnames[j], (int)(fstat.st_mtime - rstat.st_mtime)); | |
printf ("restore with the -F switch to override this sanity check\n"); | |
if (sim_log) { | |
fprintf (sim_log, "Error Attaching %s to %s - the restore state is %d seconds older than the attach file\n", sim_dname (dptr), attnames[j], (int)(fstat.st_mtime - rstat.st_mtime)); | |
fprintf (sim_log, "restore with the -F switch to override this sanity check\n"); | |
} | |
continue; | |
} | |
sim_switches = attswitches[j]; | |
r = scp_attach_unit (dptr, attunits[j], attnames[j]);/* reattach unit */ | |
if (r != SCPE_OK) { | |
printf ("Error Attaching %s to %s\n", sim_dname (dptr), attnames[j]); | |
if (sim_log) | |
fprintf (sim_log, "Error Attaching %s to %s\n", sim_dname (dptr), attnames[j]); | |
} | |
} | |
free (attnames[j]); | |
} | |
free (attnames); | |
free (attunits); | |
free (attswitches); | |
return r; | |
} | |
/* Run, go, cont, step commands | |
ru[n] [new PC] reset and start simulation | |
go [new PC] start simulation | |
co[nt] start simulation | |
s[tep] [step limit] start simulation for 'limit' instructions | |
b[oot] device bootstrap from device and start simulation | |
*/ | |
t_stat run_cmd (int32 flag, char *cptr) | |
{ | |
char *tptr, gbuf[CBUFSIZE]; | |
uint32 i, j; | |
int32 unitno; | |
t_value pcv; | |
t_stat r; | |
DEVICE *dptr; | |
UNIT *uptr; | |
GET_SWITCHES (cptr); /* get switches */ | |
sim_step = 0; | |
if ((flag == RU_RUN) || (flag == RU_GO)) { /* run or go */ | |
if (*cptr != 0) { /* argument? */ | |
cptr = get_glyph (cptr, gbuf, 0); /* get next glyph */ | |
if (*cptr != 0) /* should be end */ | |
return SCPE_2MARG; | |
if (sim_vm_parse_addr) /* address parser? */ | |
pcv = sim_vm_parse_addr (sim_dflt_dev, gbuf, &tptr); | |
else pcv = strtotv (gbuf, &tptr, sim_PC->radix);/* parse PC */ | |
if ((tptr == gbuf) || (*tptr != 0) || /* error? */ | |
(pcv > width_mask[sim_PC->width])) | |
return SCPE_ARG; | |
put_rval (sim_PC, 0, pcv); | |
} | |
if ((flag == RU_RUN) && /* run? */ | |
((r = run_boot_prep ()) != SCPE_OK)) /* reset sim */ | |
return r; | |
} | |
else if (flag == RU_STEP) { /* step */ | |
if (*cptr != 0) { /* argument? */ | |
cptr = get_glyph (cptr, gbuf, 0); /* get next glyph */ | |
if (*cptr != 0) /* should be end */ | |
return SCPE_2MARG; | |
sim_step = (int32) get_uint (gbuf, 10, INT_MAX, &r); | |
if ((r != SCPE_OK) || (sim_step <= 0)) /* error? */ | |
return SCPE_ARG; | |
} | |
else sim_step = 1; | |
} | |
else if (flag == RU_BOOT) { /* boot */ | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
cptr = get_glyph (cptr, gbuf, 0); /* get next glyph */ | |
if (*cptr != 0) /* should be end */ | |
return SCPE_2MARG; | |
dptr = find_unit (gbuf, &uptr); /* locate unit */ | |
if (dptr == NULL) /* found dev? */ | |
return SCPE_NXDEV; | |
if (uptr == NULL) /* valid unit? */ | |
return SCPE_NXUN; | |
if (dptr->boot == NULL) /* can it boot? */ | |
return SCPE_NOFNC; | |
if (uptr->flags & UNIT_DIS) /* disabled? */ | |
return SCPE_UDIS; | |
if ((uptr->flags & UNIT_ATTABLE) && /* if attable, att? */ | |
!(uptr->flags & UNIT_ATT)) | |
return SCPE_UNATT; | |
unitno = (int32) (uptr - dptr->units); /* recover unit# */ | |
if ((r = run_boot_prep ()) != SCPE_OK) /* reset sim */ | |
return r; | |
if ((r = dptr->boot (unitno, dptr)) != SCPE_OK) /* boot device */ | |
return r; | |
} | |
else if (flag != RU_CONT) /* must be cont */ | |
return SCPE_IERR; | |
for (i = 1; (dptr = sim_devices[i]) != NULL; i++) { /* reposition all */ | |
for (j = 0; j < dptr->numunits; j++) { /* seq devices */ | |
uptr = dptr->units + j; | |
if ((uptr->flags & (UNIT_ATT + UNIT_SEQ)) == (UNIT_ATT + UNIT_SEQ)) | |
sim_fseek (uptr->fileref, uptr->pos, SEEK_SET); | |
} | |
} | |
stop_cpu = 0; | |
sim_is_running = 1; /* flag running */ | |
if (sim_ttrun () != SCPE_OK) { /* set console mode */ | |
sim_is_running = 0; /* flag idle */ | |
sim_ttcmd (); | |
return SCPE_TTYERR; | |
} | |
if ((r = sim_check_console (30)) != SCPE_OK) { /* check console, error? */ | |
sim_is_running = 0; /* flag idle */ | |
sim_ttcmd (); | |
return r; | |
} | |
if (signal (SIGINT, int_handler) == SIG_ERR) { /* set WRU */ | |
sim_is_running = 0; /* flag idle */ | |
sim_ttcmd (); | |
return SCPE_SIGERR; | |
} | |
#ifdef SIGHUP | |
if (signal (SIGHUP, int_handler) == SIG_ERR) { /* set WRU */ | |
sim_is_running = 0; /* flag idle */ | |
sim_ttcmd (); | |
return SCPE_SIGERR; | |
} | |
#endif | |
if (signal (SIGTERM, int_handler) == SIG_ERR) { /* set WRU */ | |
sim_is_running = 0; /* flag idle */ | |
sim_ttcmd (); | |
return SCPE_SIGERR; | |
} | |
if (sim_step) /* set step timer */ | |
sim_activate (&sim_step_unit, sim_step); | |
fflush(stdout); /* flush stdout */ | |
if (sim_log) /* flush log if enabled */ | |
fflush (sim_log); | |
sim_throt_sched (); /* set throttle */ | |
sim_brk_clract (); /* defang actions */ | |
sim_rtcn_init_all (); /* re-init clocks */ | |
sim_start_timer_services (); /* enable wall clock timing */ | |
r = sim_instr(); | |
sim_is_running = 0; /* flag idle */ | |
sim_stop_timer_services (); /* disable wall clock timing */ | |
sim_ttcmd (); /* restore console */ | |
signal (SIGINT, SIG_DFL); /* cancel WRU */ | |
#ifdef SIGHUP | |
signal (SIGHUP, SIG_DFL); /* cancel WRU */ | |
#endif | |
signal (SIGTERM, SIG_DFL); /* cancel WRU */ | |
if (sim_log) /* flush console log */ | |
fflush (sim_log); | |
if (sim_deb) /* flush debug log */ | |
fflush (sim_deb); | |
for (i = 1; (dptr = sim_devices[i]) != NULL; i++) { /* flush attached files */ | |
for (j = 0; j < dptr->numunits; j++) { /* if not buffered in mem */ | |
uptr = dptr->units + j; | |
if ((uptr->flags & UNIT_ATT) && /* attached, */ | |
!(uptr->flags & UNIT_BUF) && /* not buffered, */ | |
(uptr->fileref)) { /* real file, */ | |
if (uptr->io_flush) /* unit specific flush routine */ | |
uptr->io_flush (uptr); | |
else | |
if (!(uptr->dynflags & UNIT_NO_FIO) && /* is FILE *, */ | |
!(uptr->flags & UNIT_RO)) /* not read only? */ | |
fflush (uptr->fileref); | |
} | |
} | |
} | |
sim_cancel (&sim_step_unit); /* cancel step timer */ | |
sim_throt_cancel (); /* cancel throttle */ | |
AIO_UPDATE_QUEUE; | |
UPDATE_SIM_TIME; /* update sim time */ | |
return r; | |
} | |
/* run command message handler */ | |
void | |
run_cmd_message (const char *unechoed_cmdline, t_stat r) | |
{ | |
#if defined (VMS) | |
printf ("\n"); | |
#endif | |
if (unechoed_cmdline) { | |
printf("%s> %s\n", do_position(), unechoed_cmdline); | |
if (sim_log) | |
fprintf (sim_log, "%s> %s\n", do_position(), unechoed_cmdline); | |
} | |
fprint_stopped (stdout, r); /* print msg */ | |
if (sim_log) /* log if enabled */ | |
fprint_stopped (sim_log, r); | |
} | |
/* Common setup for RUN or BOOT */ | |
t_stat run_boot_prep (void) | |
{ | |
UNIT *uptr; | |
sim_interval = 0; /* reset queue */ | |
sim_time = sim_rtime = 0; | |
noqueue_time = 0; | |
for (uptr = sim_clock_queue; uptr != QUEUE_LIST_END; uptr = sim_clock_queue) { | |
sim_clock_queue = uptr->next; | |
uptr->next = NULL; | |
} | |
return reset_all (0); | |
} | |
/* Print stopped message */ | |
void fprint_stopped_gen (FILE *st, t_stat v, REG *pc, DEVICE *dptr) | |
{ | |
int32 i; | |
t_stat r = 0; | |
t_addr k; | |
t_value pcval; | |
if (v >= SCPE_BASE) | |
fprintf (st, "\n%s, %s: ", sim_error_text (v), pc->name); | |
else | |
fprintf (st, "\n%s, %s: ", sim_stop_messages[v], pc->name); | |
pcval = get_rval (pc, 0); | |
if (sim_vm_fprint_addr) | |
sim_vm_fprint_addr (st, dptr, (t_addr) pcval); | |
else fprint_val (st, pcval, pc->radix, pc->width, | |
pc->flags & REG_FMT); | |
if ((dptr != NULL) && (dptr->examine != NULL)) { | |
for (i = 0; i < sim_emax; i++) | |
sim_eval[i] = 0; | |
for (i = 0, k = (t_addr) pcval; i < sim_emax; i++, k = k + dptr->aincr) { | |
if ((r = dptr->examine (&sim_eval[i], k, dptr->units, SWMASK ('V'))) != SCPE_OK) | |
break; | |
} | |
if ((r == SCPE_OK) || (i > 0)) { | |
fprintf (st, " ("); | |
if (fprint_sym (st, (t_addr) pcval, sim_eval, NULL, SWMASK('M')|SIM_SW_STOP) > 0) | |
fprint_val (st, sim_eval[0], dptr->dradix, dptr->dwidth, PV_RZRO); | |
fprintf (st, ")"); | |
} | |
} | |
fprintf (st, "\n"); | |
return; | |
} | |
void fprint_stopped (FILE *st, t_stat v) | |
{ | |
fprint_stopped_gen (st, v, sim_PC, sim_dflt_dev); | |
return; | |
} | |
/* Unit service for step timeout, originally scheduled by STEP n command | |
Return step timeout SCP code, will cause simulation to stop */ | |
t_stat step_svc (UNIT *uptr) | |
{ | |
return SCPE_STEP; | |
} | |
/* Cancel scheduled step service */ | |
t_stat sim_cancel_step (void) | |
{ | |
return sim_cancel (&sim_step_unit); | |
} | |
/* Signal handler for ^C signal - set stop simulation flag */ | |
void int_handler (int sig) | |
{ | |
stop_cpu = 1; | |
return; | |
} | |
/* Examine/deposit commands | |
ex[amine] [modifiers] list examine | |
de[posit] [modifiers] list val deposit | |
ie[xamine] [modifiers] list interactive examine | |
id[eposit] [modifiers] list interactive deposit | |
modifiers | |
@filename output file | |
-letter(s) switches | |
devname'n device name and unit number | |
[{&|^}value]{=|==|!|!=|>|>=|<|<=} value search specification | |
list list of addresses and registers | |
addr[:addr|-addr] address range | |
ALL all addresses | |
register[:register|-register] register range | |
register[index] register array element | |
register[start:end] register array range | |
STATE all registers | |
*/ | |
t_stat exdep_cmd (int32 flag, char *cptr) | |
{ | |
char gbuf[CBUFSIZE], *gptr, *tptr; | |
int32 opt; | |
t_addr low, high; | |
t_stat reason; | |
DEVICE *tdptr; | |
REG *lowr, *highr; | |
FILE *ofile; | |
opt = CMD_OPT_SW|CMD_OPT_SCH|CMD_OPT_DFT; /* options for all */ | |
if (flag == EX_E) /* extra for EX */ | |
opt = opt | CMD_OPT_OF; | |
cptr = get_sim_opt (opt, cptr, &reason); /* get cmd options */ | |
if (!cptr) /* error? */ | |
return reason; | |
if (*cptr == 0) /* must be more */ | |
return SCPE_2FARG; | |
if (sim_dfunit == NULL) /* got a unit? */ | |
return SCPE_NXUN; | |
cptr = get_glyph (cptr, gbuf, 0); /* get list */ | |
if ((flag == EX_D) && (*cptr == 0)) /* deposit needs more */ | |
return SCPE_2FARG; | |
ofile = sim_ofile? sim_ofile: stdout; /* no ofile? use stdout */ | |
for (gptr = gbuf, reason = SCPE_OK; | |
(*gptr != 0) && (reason == SCPE_OK); gptr = tptr) { | |
tdptr = sim_dfdev; /* working dptr */ | |
if (strncmp (gptr, "STATE", strlen ("STATE")) == 0) { | |
tptr = gptr + strlen ("STATE"); | |
if (*tptr && (*tptr++ != ',')) | |
return SCPE_ARG; | |
if ((lowr = sim_dfdev->registers) == NULL) | |
return SCPE_NXREG; | |
for (highr = lowr; highr->name != NULL; highr++) ; | |
sim_switches = sim_switches | SIM_SW_HIDE; | |
reason = exdep_reg_loop (ofile, sim_schptr, flag, cptr, | |
lowr, --highr, 0, 0); | |
continue; | |
} | |
if ((lowr = find_reg (gptr, &tptr, tdptr)) || /* local reg or */ | |
(!(sim_opt_out & CMD_OPT_DFT) && /* no dflt, global? */ | |
(lowr = find_reg_glob (gptr, &tptr, &tdptr)))) { | |
low = high = 0; | |
if ((*tptr == '-') || (*tptr == ':')) { | |
highr = find_reg (tptr + 1, &tptr, tdptr); | |
if (highr == NULL) | |
return SCPE_NXREG; | |
} | |
else { | |
highr = lowr; | |
if (*tptr == '[') { | |
if (lowr->depth <= 1) | |
return SCPE_ARG; | |
tptr = get_range (NULL, tptr + 1, &low, &high, | |
10, lowr->depth - 1, ']'); | |
if (tptr == NULL) | |
return SCPE_ARG; | |
} | |
} | |
if (*tptr && (*tptr++ != ',')) | |
return SCPE_ARG; | |
reason = exdep_reg_loop (ofile, sim_schptr, flag, cptr, | |
lowr, highr, (uint32) low, (uint32) high); | |
continue; | |
} | |
tptr = get_range (sim_dfdev, gptr, &low, &high, sim_dfdev->aradix, | |
(((sim_dfunit->capac == 0) || (flag == EX_E))? 0: | |
sim_dfunit->capac - sim_dfdev->aincr), 0); | |
if (tptr == NULL) | |
return SCPE_ARG; | |
if (*tptr && (*tptr++ != ',')) | |
return SCPE_ARG; | |
reason = exdep_addr_loop (ofile, sim_schptr, flag, cptr, low, high, | |
sim_dfdev, sim_dfunit); | |
} /* end for */ | |
if (sim_ofile) /* close output file */ | |
fclose (sim_ofile); | |
return reason; | |
} | |
/* Loop controllers for examine/deposit | |
exdep_reg_loop examine/deposit range of registers | |
exdep_addr_loop examine/deposit range of addresses | |
*/ | |
t_stat exdep_reg_loop (FILE *ofile, SCHTAB *schptr, int32 flag, char *cptr, | |
REG *lowr, REG *highr, uint32 lows, uint32 highs) | |
{ | |
t_stat reason; | |
uint32 idx, val_start=lows; | |
t_value val, last_val; | |
REG *rptr; | |
if ((lowr == NULL) || (highr == NULL)) | |
return SCPE_IERR; | |
if (lowr > highr) | |
return SCPE_ARG; | |
for (rptr = lowr; rptr <= highr; rptr++) { | |
if ((sim_switches & SIM_SW_HIDE) && | |
(rptr->flags & REG_HIDDEN)) | |
continue; | |
val = last_val = 0; | |
for (idx = lows; idx <= highs; idx++) { | |
if (idx >= rptr->depth) | |
return SCPE_SUB; | |
val = get_rval (rptr, idx); | |
if (schptr && !test_search (val, schptr)) | |
continue; | |
if (flag == EX_E) { | |
if ((idx > lows) && (val == last_val)) | |
continue; | |
if (idx > val_start+1) { | |
if (idx-1 == val_start+1) { | |
reason = ex_reg (ofile, val, flag, rptr, idx-1); | |
if (reason != SCPE_OK) | |
return reason; | |
} | |
else | |
fprintf (ofile, "%s[%d]-%s[%d]: same as above\n", rptr->name, val_start+1, rptr->name, idx-1); | |
} | |
last_val = val; | |
val_start = idx; | |
reason = ex_reg (ofile, val, flag, rptr, idx); | |
if (reason != SCPE_OK) | |
return reason; | |
if (sim_log && (ofile == stdout)) | |
ex_reg (sim_log, val, flag, rptr, idx); | |
} | |
if (flag != EX_E) { | |
reason = dep_reg (flag, cptr, rptr, idx); | |
if (reason != SCPE_OK) | |
return reason; | |
} | |
} | |
if ((flag == EX_E) && (val_start != highs)) { | |
if (highs == val_start+1) { | |
reason = ex_reg (ofile, val, flag, rptr, highs); | |
if (reason != SCPE_OK) | |
return reason; | |
} | |
else | |
fprintf (ofile, "%s[%d]-%s[%d]: same as above\n", rptr->name, val_start+1, rptr->name, highs); | |
} | |
} | |
return SCPE_OK; | |
} | |
t_stat exdep_addr_loop (FILE *ofile, SCHTAB *schptr, int32 flag, char *cptr, | |
t_addr low, t_addr high, DEVICE *dptr, UNIT *uptr) | |
{ | |
t_addr i, mask; | |
t_stat reason; | |
if (uptr->flags & UNIT_DIS) /* disabled? */ | |
return SCPE_UDIS; | |
mask = (t_addr) width_mask[dptr->awidth]; | |
if ((low > mask) || (high > mask) || (low > high)) | |
return SCPE_ARG; | |
for (i = low; i <= high; ) { /* all paths must incr!! */ | |
reason = get_aval (i, dptr, uptr); /* get data */ | |
if (reason != SCPE_OK) /* return if error */ | |
return reason; | |
if (schptr && !test_search (sim_eval[0], schptr)) | |
i = i + dptr->aincr; /* sch fails, incr */ | |
else { /* no sch or success */ | |
if (flag != EX_D) { /* ex, ie, or id? */ | |
reason = ex_addr (ofile, flag, i, dptr, uptr); | |
if (reason > SCPE_OK) | |
return reason; | |
if (sim_log && (ofile == stdout)) | |
ex_addr (sim_log, flag, i, dptr, uptr); | |
} | |
else reason = 1 - dptr->aincr; /* no, dflt incr */ | |
if (flag != EX_E) { /* ie, id, or d? */ | |
reason = dep_addr (flag, cptr, i, dptr, uptr, reason); | |
if (reason > SCPE_OK) | |
return reason; | |
} | |
i = i + (1 - reason); /* incr */ | |
} | |
} | |
return SCPE_OK; | |
} | |
/* Examine register routine | |
Inputs: | |
ofile = output stream | |
val = current register value | |
flag = type of ex/mod command (ex, iex, idep) | |
rptr = pointer to register descriptor | |
idx = index | |
Outputs: | |
return = error status | |
*/ | |
t_stat ex_reg (FILE *ofile, t_value val, int32 flag, REG *rptr, uint32 idx) | |
{ | |
int32 rdx; | |
if (rptr == NULL) | |
return SCPE_IERR; | |
if (rptr->depth > 1) | |
fprintf (ofile, "%s[%d]:\t", rptr->name, idx); | |
else fprintf (ofile, "%s:\t", rptr->name); | |
if (!(flag & EX_E)) | |
return SCPE_OK; | |
GET_RADIX (rdx, rptr->radix); | |
if ((rptr->flags & REG_VMAD) && sim_vm_fprint_addr) | |
sim_vm_fprint_addr (ofile, sim_dflt_dev, (t_addr) val); | |
else if (!(rptr->flags & REG_VMIO) || | |
(fprint_sym (ofile, rdx, &val, NULL, sim_switches | SIM_SW_REG) > 0)) { | |
fprint_val (ofile, val, rdx, rptr->width, rptr->flags & REG_FMT); | |
if (rptr->fields) { | |
fprintf (ofile, "\t"); | |
fprint_fields (ofile, val, val, rptr->fields); | |
} | |
} | |
if (flag & EX_I) | |
fprintf (ofile, "\t"); | |
else fprintf (ofile, "\n"); | |
return SCPE_OK; | |
} | |
/* Get register value | |
Inputs: | |
rptr = pointer to register descriptor | |
idx = index | |
Outputs: | |
return = register value | |
*/ | |
t_value get_rval (REG *rptr, uint32 idx) | |
{ | |
size_t sz; | |
t_value val; | |
UNIT *uptr; | |
sz = SZ_R (rptr); | |
if ((rptr->depth > 1) && (rptr->flags & REG_CIRC)) { | |
idx = idx + rptr->qptr; | |
if (idx >= rptr->depth) idx = idx - rptr->depth; | |
} | |
if ((rptr->depth > 1) && (rptr->flags & REG_UNIT)) { | |
uptr = ((UNIT *) rptr->loc) + idx; | |
#if defined (USE_INT64) | |
if (sz <= sizeof (uint32)) | |
val = *((uint32 *) uptr); | |
else val = *((t_uint64 *) uptr); | |
#else | |
val = *((uint32 *) uptr); | |
#endif | |
} | |
else if (((rptr->depth > 1) || (rptr->flags & REG_FIT)) && | |
(sz == sizeof (uint8))) | |
val = *(((uint8 *) rptr->loc) + idx); | |
else if (((rptr->depth > 1) || (rptr->flags & REG_FIT)) && | |
(sz == sizeof (uint16))) | |
val = *(((uint16 *) rptr->loc) + idx); | |
#if defined (USE_INT64) | |
else if (sz <= sizeof (uint32)) | |
val = *(((uint32 *) rptr->loc) + idx); | |
else val = *(((t_uint64 *) rptr->loc) + idx); | |
#else | |
else val = *(((uint32 *) rptr->loc) + idx); | |
#endif | |
val = (val >> rptr->offset) & width_mask[rptr->width]; | |
return val; | |
} | |
/* Deposit register routine | |
Inputs: | |
flag = type of deposit (normal/interactive) | |
cptr = pointer to input string | |
rptr = pointer to register descriptor | |
idx = index | |
Outputs: | |
return = error status | |
*/ | |
t_stat dep_reg (int32 flag, char *cptr, REG *rptr, uint32 idx) | |
{ | |
t_stat r; | |
t_value val, mask; | |
int32 rdx; | |
char *tptr, gbuf[CBUFSIZE]; | |
if ((cptr == NULL) || (rptr == NULL)) | |
return SCPE_IERR; | |
if (rptr->flags & REG_RO) | |
return SCPE_RO; | |
if (flag & EX_I) { | |
cptr = read_line (gbuf, sizeof(gbuf), stdin); | |
if (sim_log) | |
fprintf (sim_log, "%s\n", cptr? cptr: ""); | |
if (cptr == NULL) /* force exit */ | |
return 1; | |
if (*cptr == 0) /* success */ | |
return SCPE_OK; | |
} | |
mask = width_mask[rptr->width]; | |
GET_RADIX (rdx, rptr->radix); | |
if ((rptr->flags & REG_VMAD) && sim_vm_parse_addr) { /* address form? */ | |
val = sim_vm_parse_addr (sim_dflt_dev, cptr, &tptr); | |
if ((tptr == cptr) || (*tptr != 0) || (val > mask)) | |
return SCPE_ARG; | |
} | |
else if (!(rptr->flags & REG_VMIO) || /* dont use sym? */ | |
(parse_sym (cptr, rdx, NULL, &val, sim_switches | SIM_SW_REG) > SCPE_OK)) { | |
val = get_uint (cptr, rdx, mask, &r); | |
if (r != SCPE_OK) | |
return SCPE_ARG; | |
} | |
if ((rptr->flags & REG_NZ) && (val == 0)) | |
return SCPE_ARG; | |
put_rval (rptr, idx, val); | |
return SCPE_OK; | |
} | |
/* Put register value | |
Inputs: | |
rptr = pointer to register descriptor | |
idx = index | |
val = new value | |
mask = mask | |
Outputs: | |
none | |
*/ | |
void put_rval (REG *rptr, uint32 idx, t_value val) | |
{ | |
size_t sz; | |
t_value mask; | |
UNIT *uptr; | |
#define PUT_RVAL(sz,rp,id,v,m) \ | |
*(((sz *) rp->loc) + id) = \ | |
(*(((sz *) rp->loc) + id) & \ | |
~((m) << (rp)->offset)) | ((v) << (rp)->offset) | |
if (rptr == sim_PC) | |
sim_brk_npc (0); | |
sz = SZ_R (rptr); | |
mask = width_mask[rptr->width]; | |
if ((rptr->depth > 1) && (rptr->flags & REG_CIRC)) { | |
idx = idx + rptr->qptr; | |
if (idx >= rptr->depth) | |
idx = idx - rptr->depth; | |
} | |
if ((rptr->depth > 1) && (rptr->flags & REG_UNIT)) { | |
uptr = ((UNIT *) rptr->loc) + idx; | |
#if defined (USE_INT64) | |
if (sz <= sizeof (uint32)) | |
*((uint32 *) uptr) = (*((uint32 *) uptr) & | |
~(((uint32) mask) << rptr->offset)) | | |
(((uint32) val) << rptr->offset); | |
else *((t_uint64 *) uptr) = (*((t_uint64 *) uptr) | |
& ~(mask << rptr->offset)) | (val << rptr->offset); | |
#else | |
*((uint32 *) uptr) = (*((uint32 *) uptr) & | |
~(((uint32) mask) << rptr->offset)) | | |
(((uint32) val) << rptr->offset); | |
#endif | |
} | |
else if (((rptr->depth > 1) || (rptr->flags & REG_FIT)) && | |
(sz == sizeof (uint8))) | |
PUT_RVAL (uint8, rptr, idx, (uint32) val, (uint32) mask); | |
else if (((rptr->depth > 1) || (rptr->flags & REG_FIT)) && | |
(sz == sizeof (uint16))) | |
PUT_RVAL (uint16, rptr, idx, (uint32) val, (uint32) mask); | |
#if defined (USE_INT64) | |
else if (sz <= sizeof (uint32)) | |
PUT_RVAL (uint32, rptr, idx, (int32) val, (uint32) mask); | |
else PUT_RVAL (t_uint64, rptr, idx, val, mask); | |
#else | |
else PUT_RVAL (uint32, rptr, idx, val, mask); | |
#endif | |
return; | |
} | |
/* Examine address routine | |
Inputs: (sim_eval is an implicit argument) | |
ofile = output stream | |
flag = type of ex/mod command (ex, iex, idep) | |
addr = address to examine | |
dptr = pointer to device | |
uptr = pointer to unit | |
Outputs: | |
return = if > 0, error status | |
if <= 0,-number of extra addr units retired | |
*/ | |
t_stat ex_addr (FILE *ofile, int32 flag, t_addr addr, DEVICE *dptr, UNIT *uptr) | |
{ | |
t_stat reason; | |
int32 rdx; | |
if (sim_vm_fprint_addr) | |
sim_vm_fprint_addr (ofile, dptr, addr); | |
else fprint_val (ofile, addr, dptr->aradix, dptr->awidth, PV_LEFT); | |
fprintf (ofile, ":\t"); | |
if (!(flag & EX_E)) | |
return (1 - dptr->aincr); | |
GET_RADIX (rdx, dptr->dradix); | |
if ((reason = fprint_sym (ofile, addr, sim_eval, uptr, sim_switches)) > 0) { | |
fprint_val (ofile, sim_eval[0], rdx, dptr->dwidth, PV_RZRO); | |
reason = 1 - dptr->aincr; | |
} | |
if (flag & EX_I) | |
fprintf (ofile, "\t"); | |
else fprintf (ofile, "\n"); | |
return reason; | |
} | |
/* Get address routine | |
Inputs: | |
flag = type of ex/mod command (ex, iex, idep) | |
addr = address to examine | |
dptr = pointer to device | |
uptr = pointer to unit | |
Outputs: (sim_eval is an implicit output) | |
return = error status | |
*/ | |
t_stat get_aval (t_addr addr, DEVICE *dptr, UNIT *uptr) | |
{ | |
int32 i; | |
t_value mask; | |
t_addr j, loc; | |
size_t sz; | |
t_stat reason = SCPE_OK; | |
if ((dptr == NULL) || (uptr == NULL)) | |
return SCPE_IERR; | |
mask = width_mask[dptr->dwidth]; | |
for (i = 0; i < sim_emax; i++) | |
sim_eval[i] = 0; | |
for (i = 0, j = addr; i < sim_emax; i++, j = j + dptr->aincr) { | |
if (dptr->examine != NULL) { | |
reason = dptr->examine (&sim_eval[i], j, uptr, sim_switches); | |
if (reason != SCPE_OK) | |
break; | |
} | |
else { | |
if (!(uptr->flags & UNIT_ATT)) | |
return SCPE_UNATT; | |
if (uptr->dynflags & UNIT_NO_FIO) | |
return SCPE_NOFNC; | |
if ((uptr->flags & UNIT_FIX) && (j >= uptr->capac)) { | |
reason = SCPE_NXM; | |
break; | |
} | |
sz = SZ_D (dptr); | |
loc = j / dptr->aincr; | |
if (uptr->flags & UNIT_BUF) { | |
SZ_LOAD (sz, sim_eval[i], uptr->filebuf, loc); | |
} | |
else { | |
sim_fseek (uptr->fileref, (t_addr)(sz * loc), SEEK_SET); | |
sim_fread (&sim_eval[i], sz, 1, uptr->fileref); | |
if ((feof (uptr->fileref)) && | |
!(uptr->flags & UNIT_FIX)) { | |
reason = SCPE_EOF; | |
break; | |
} | |
else if (ferror (uptr->fileref)) { | |
clearerr (uptr->fileref); | |
reason = SCPE_IOERR; | |
break; | |
} | |
} | |
} | |
sim_eval[i] = sim_eval[i] & mask; | |
} | |
if ((reason != SCPE_OK) && (i == 0)) | |
return reason; | |
return SCPE_OK; | |
} | |
/* Deposit address routine | |
Inputs: | |
flag = type of deposit (normal/interactive) | |
cptr = pointer to input string | |
addr = address to examine | |
dptr = pointer to device | |
uptr = pointer to unit | |
dfltinc = value to return on cr input | |
Outputs: | |
return = if > 0, error status | |
if <= 0, -number of extra address units retired | |
*/ | |
t_stat dep_addr (int32 flag, char *cptr, t_addr addr, DEVICE *dptr, | |
UNIT *uptr, int32 dfltinc) | |
{ | |
int32 i, count, rdx; | |
t_addr j, loc; | |
t_stat r, reason; | |
t_value mask; | |
size_t sz; | |
char gbuf[CBUFSIZE]; | |
if (dptr == NULL) | |
return SCPE_IERR; | |
if (flag & EX_I) { | |
cptr = read_line (gbuf, sizeof(gbuf), stdin); | |
if (sim_log) | |
fprintf (sim_log, "%s\n", cptr? cptr: ""); | |
if (cptr == NULL) /* force exit */ | |
return 1; | |
if (*cptr == 0) /* success */ | |
return dfltinc; | |
} | |
if (uptr->flags & UNIT_RO) /* read only? */ | |
return SCPE_RO; | |
mask = width_mask[dptr->dwidth]; | |
GET_RADIX (rdx, dptr->dradix); | |
if ((reason = parse_sym (cptr, addr, uptr, sim_eval, sim_switches)) > 0) { | |
sim_eval[0] = get_uint (cptr, rdx, mask, &reason); | |
if (reason != SCPE_OK) | |
return reason; | |
reason = dfltinc; | |
} | |
count = (1 - reason + (dptr->aincr - 1)) / dptr->aincr; | |
for (i = 0, j = addr; i < count; i++, j = j + dptr->aincr) { | |
sim_eval[i] = sim_eval[i] & mask; | |
if (dptr->deposit != NULL) { | |
r = dptr->deposit (sim_eval[i], j, uptr, sim_switches); | |
if (r != SCPE_OK) | |
return r; | |
} | |
else { | |
if (!(uptr->flags & UNIT_ATT)) | |
return SCPE_UNATT; | |
if (uptr->dynflags & UNIT_NO_FIO) | |
return SCPE_NOFNC; | |
if ((uptr->flags & UNIT_FIX) && (j >= uptr->capac)) | |
return SCPE_NXM; | |
sz = SZ_D (dptr); | |
loc = j / dptr->aincr; | |
if (uptr->flags & UNIT_BUF) { | |
SZ_STORE (sz, sim_eval[i], uptr->filebuf, loc); | |
if (loc >= uptr->hwmark) | |
uptr->hwmark = (uint32) loc + 1; | |
} | |
else { | |
sim_fseek (uptr->fileref, (t_addr)(sz * loc), SEEK_SET); | |
sim_fwrite (&sim_eval[i], sz, 1, uptr->fileref); | |
if (ferror (uptr->fileref)) { | |
clearerr (uptr->fileref); | |
return SCPE_IOERR; | |
} | |
} | |
} | |
} | |
return reason; | |
} | |
/* Evaluate command */ | |
t_stat eval_cmd (int32 flg, char *cptr) | |
{ | |
DEVICE *dptr = sim_dflt_dev; | |
int32 i, rdx, a, lim; | |
t_stat r; | |
GET_SWITCHES (cptr); | |
GET_RADIX (rdx, dptr->dradix); | |
for (i = 0; i < sim_emax; i++) | |
sim_eval[i] = 0; | |
if (*cptr == 0) | |
return SCPE_2FARG; | |
if ((r = parse_sym (cptr, 0, dptr->units, sim_eval, sim_switches)) > 0) { | |
sim_eval[0] = get_uint (cptr, rdx, width_mask[dptr->dwidth], &r); | |
if (r != SCPE_OK) | |
return r; | |
} | |
lim = 1 - r; | |
for (i = a = 0; a < lim; ) { | |
printf ("%d:\t", a); | |
if ((r = fprint_sym (stdout, a, &sim_eval[i], dptr->units, sim_switches)) > 0) | |
r = fprint_val (stdout, sim_eval[i], rdx, dptr->dwidth, PV_RZRO); | |
printf ("\n"); | |
if (sim_log) { | |
fprintf (sim_log, "%d\t", i); | |
if ((r = fprint_sym (sim_log, a, &sim_eval[i], dptr->units, sim_switches)) > 0) | |
r = fprint_val (sim_log, sim_eval[i], rdx, dptr->dwidth, PV_RZRO); | |
fprintf (sim_log, "\n"); | |
} | |
if (r < 0) | |
a = a + 1 - r; | |
else a = a + dptr->aincr; | |
i = a / dptr->aincr; | |
} | |
return SCPE_OK; | |
} | |
/* String processing routines | |
read_line read line | |
Inputs: | |
cptr = pointer to buffer | |
size = maximum size | |
stream = pointer to input stream | |
Outputs: | |
optr = pointer to first non-blank character | |
NULL if EOF | |
*/ | |
char *read_line (char *cptr, int32 size, FILE *stream) | |
{ | |
return read_line_p (NULL, cptr, size, stream); | |
} | |
/* read_line_p read line with prompt | |
Inputs: | |
prompt = pointer to prompt string | |
cptr = pointer to buffer | |
size = maximum size | |
stream = pointer to input stream | |
Outputs: | |
optr = pointer to first non-blank character | |
NULL if EOF | |
*/ | |
char *read_line_p (char *prompt, char *cptr, int32 size, FILE *stream) | |
{ | |
char *tptr; | |
#if defined(HAVE_DLOPEN) | |
static int initialized = 0; | |
typedef char *(*readline_func)(const char *); | |
static readline_func p_readline = NULL; | |
typedef void (*add_history_func)(const char *); | |
static add_history_func p_add_history = NULL; | |
if (!initialized) { | |
initialized = 1; | |
void *handle; | |
#define S__STR_QUOTE(tok) #tok | |
#define S__STR(tok) S__STR_QUOTE(tok) | |
handle = dlopen("libncurses." S__STR(HAVE_DLOPEN), RTLD_NOW|RTLD_GLOBAL); | |
handle = dlopen("libcurses." S__STR(HAVE_DLOPEN), RTLD_NOW|RTLD_GLOBAL); | |
handle = dlopen("libreadline." S__STR(HAVE_DLOPEN), RTLD_NOW|RTLD_GLOBAL); | |
if (!handle) | |
handle = dlopen("libreadline." S__STR(HAVE_DLOPEN) ".6", RTLD_NOW|RTLD_GLOBAL); | |
if (!handle) | |
handle = dlopen("libreadline." S__STR(HAVE_DLOPEN) ".5", RTLD_NOW|RTLD_GLOBAL); | |
if (handle) { | |
p_readline = (readline_func)((size_t)dlsym(handle, "readline")); | |
p_add_history = (add_history_func)((size_t)dlsym(handle, "add_history")); | |
} | |
} | |
if (prompt) { /* interactive? */ | |
if (p_readline) { | |
char *tmpc = p_readline (prompt); /* get cmd line */ | |
if (tmpc == NULL) /* bad result? */ | |
cptr = NULL; | |
else { | |
strncpy (cptr, tmpc, size); /* copy result */ | |
free (tmpc) ; /* free temp */ | |
} | |
} | |
else { | |
printf ("%s", prompt); /* display prompt */ | |
cptr = fgets (cptr, size, stream); /* get cmd line */ | |
} | |
} | |
else cptr = fgets (cptr, size, stream); /* get cmd line */ | |
#else | |
if (prompt) /* interactive? */ | |
printf ("%s", prompt); /* display prompt */ | |
cptr = fgets (cptr, size, stream); /* get cmd line */ | |
#endif | |
if (cptr == NULL) { | |
clearerr (stream); /* clear error */ | |
return NULL; /* ignore EOF */ | |
} | |
for (tptr = cptr; tptr < (cptr + size); tptr++) { /* remove cr or nl */ | |
if ((*tptr == '\n') || (*tptr == '\r') || | |
(tptr == (cptr + size - 1))) { /* str max length? */ | |
*tptr = 0; /* terminate */ | |
break; | |
} | |
} | |
while (isspace (*cptr)) /* trim leading spc */ | |
cptr++; | |
if (*cptr == ';') { /* ignore comment */ | |
if (sim_do_echo) /* echo comments if -v */ | |
printf("%s> %s\n", do_position(), cptr); | |
if (sim_do_echo && sim_log) | |
fprintf (sim_log, "%s> %s\n", do_position(), cptr); | |
*cptr = 0; | |
} | |
#if defined (HAVE_DLOPEN) | |
if (prompt && p_add_history && *cptr) /* Save non blank lines in history */ | |
p_add_history (cptr); | |
#endif | |
return cptr; | |
} | |
/* get_glyph get next glyph (force upper case) | |
get_glyph_nc get next glyph (no conversion) | |
get_glyph_quoted get next glyph (potentially enclosed in quotes, no conversion) | |
get_glyph_gen get next glyph (general case) | |
Inputs: | |
iptr = pointer to input string | |
optr = pointer to output string | |
mchar = optional end of glyph character | |
uc = TRUE for convert to upper case (_gen only) | |
quote = TRUE to allow quote enclosing values (_gen only) | |
Outputs | |
result = pointer to next character in input string | |
*/ | |
static char *get_glyph_gen (char *iptr, char *optr, char mchar, t_bool uc, t_bool quote) | |
{ | |
t_bool quoting = FALSE; | |
char quote_char = 0; | |
while ((*iptr != 0) && | |
((quote && quoting) || ((isspace (*iptr) == 0) && (*iptr != mchar)))) { | |
if (quote) { | |
if (quoting) { | |
if (*iptr == quote_char) | |
quoting = FALSE; | |
} | |
else { | |
if ((*iptr == '"') || (*iptr == '\'')) { | |
quoting = TRUE; | |
quote_char = *iptr; | |
} | |
} | |
} | |
if (islower (*iptr) && uc) | |
*optr = toupper (*iptr); | |
else *optr = *iptr; | |
iptr++; optr++; | |
} | |
*optr = 0; | |
if (mchar && (*iptr == mchar)) /* skip terminator */ | |
iptr++; | |
while (isspace (*iptr)) /* absorb spaces */ | |
iptr++; | |
return iptr; | |
} | |
char *get_glyph (char *iptr, char *optr, char mchar) | |
{ | |
return get_glyph_gen (iptr, optr, mchar, TRUE, FALSE); | |
} | |
char *get_glyph_nc (char *iptr, char *optr, char mchar) | |
{ | |
return get_glyph_gen (iptr, optr, mchar, FALSE, FALSE); | |
} | |
char *get_glyph_quoted (char *iptr, char *optr, char mchar) | |
{ | |
return get_glyph_gen (iptr, optr, mchar, FALSE, TRUE); | |
} | |
/* Trim trailing spaces from a string | |
Inputs: | |
cptr = pointer to string | |
Outputs: | |
cptr = pointer to string | |
*/ | |
char *sim_trim_endspc (char *cptr) | |
{ | |
char *tptr; | |
tptr = cptr + strlen (cptr); | |
while ((--tptr >= cptr) && isspace (*tptr)) | |
*tptr = 0; | |
return cptr; | |
} | |
/* get_yn yes/no question | |
Inputs: | |
cptr = pointer to question | |
deflt = default answer | |
Outputs: | |
result = true if yes, false if no | |
*/ | |
t_stat get_yn (char *ques, t_stat deflt) | |
{ | |
char cbuf[CBUFSIZE], *cptr; | |
printf ("%s ", ques); | |
cptr = read_line (cbuf, sizeof(cbuf), stdin); | |
if ((cptr == NULL) || (*cptr == 0)) | |
return deflt; | |
if ((*cptr == 'Y') || (*cptr == 'y')) | |
return TRUE; | |
return FALSE; | |
} | |
/* get_uint unsigned number | |
Inputs: | |
cptr = pointer to input string | |
radix = input radix | |
max = maximum acceptable value | |
*status = pointer to error status | |
Outputs: | |
val = value | |
*/ | |
t_value get_uint (char *cptr, uint32 radix, t_value max, t_stat *status) | |
{ | |
t_value val; | |
char *tptr; | |
*status = SCPE_OK; | |
val = strtotv (cptr, &tptr, radix); | |
if ((cptr == tptr) || (val > max)) | |
*status = SCPE_ARG; | |
else { | |
while (isspace (*tptr)) tptr++; | |
if (*tptr != 0) | |
*status = SCPE_ARG; | |
} | |
return val; | |
} | |
/* get_range range specification | |
Inputs: | |
dptr = pointer to device (NULL if none) | |
cptr = pointer to input string | |
*lo = pointer to low result | |
*hi = pointer to high result | |
aradix = radix | |
max = default high value | |
term = terminating character, 0 if none | |
Outputs: | |
tptr = input pointer after processing | |
NULL if error | |
*/ | |
char *get_range (DEVICE *dptr, char *cptr, t_addr *lo, t_addr *hi, | |
uint32 rdx, t_addr max, char term) | |
{ | |
char *tptr; | |
if (max && strncmp (cptr, "ALL", strlen ("ALL")) == 0) { /* ALL? */ | |
tptr = cptr + strlen ("ALL"); | |
*lo = 0; | |
*hi = max; | |
} | |
else { | |
if (dptr && sim_vm_parse_addr) /* get low */ | |
*lo = sim_vm_parse_addr (dptr, cptr, &tptr); | |
else *lo = (t_addr) strtotv (cptr, &tptr, rdx); | |
if (cptr == tptr) /* error? */ | |
return NULL; | |
if ((*tptr == '-') || (*tptr == ':')) { /* range? */ | |
cptr = tptr + 1; | |
if (dptr && sim_vm_parse_addr) /* get high */ | |
*hi = sim_vm_parse_addr (dptr, cptr, &tptr); | |
else *hi = (t_addr) strtotv (cptr, &tptr, rdx); | |
if (cptr == tptr) | |
return NULL; | |
if (*lo > *hi) | |
return NULL; | |
} | |
else if (*tptr == '/') { /* relative? */ | |
cptr = tptr + 1; | |
*hi = (t_addr) strtotv (cptr, &tptr, rdx); /* get high */ | |
if ((cptr == tptr) || (*hi == 0)) | |
return NULL; | |
*hi = *lo + *hi - 1; | |
} | |
else *hi = *lo; | |
} | |
if (term && (*tptr++ != term)) | |
return NULL; | |
return tptr; | |
} | |
/* Find_device find device matching input string | |
Inputs: | |
cptr = pointer to input string | |
Outputs: | |
result = pointer to device | |
*/ | |
DEVICE *find_dev (char *cptr) | |
{ | |
int32 i; | |
DEVICE *dptr; | |
for (i = 0; (dptr = sim_devices[i]) != NULL; i++) { | |
if ((strcmp (cptr, dptr->name) == 0) || | |
(dptr->lname && | |
(strcmp (cptr, dptr->lname) == 0))) | |
return dptr; | |
} | |
for (i = 0; sim_internal_device_count && (dptr = sim_internal_devices[i]); ++i) { | |
if ((strcmp (cptr, dptr->name) == 0) || | |
(dptr->lname && | |
(strcmp (cptr, dptr->lname) == 0))) | |
return dptr; | |
} | |
return NULL; | |
} | |
/* Find_unit find unit matching input string | |
Inputs: | |
cptr = pointer to input string | |
uptr = pointer to unit pointer | |
Outputs: | |
result = pointer to device (null if no dev) | |
*iptr = pointer to unit (null if nx unit) | |
*/ | |
DEVICE *find_unit (char *cptr, UNIT **uptr) | |
{ | |
uint32 i, u; | |
char *nptr, *tptr; | |
t_stat r; | |
DEVICE *dptr; | |
if (uptr == NULL) /* arg error? */ | |
return NULL; | |
if ((dptr = find_dev (cptr))) { /* exact match? */ | |
if (qdisable (dptr)) /* disabled? */ | |
return NULL; | |
*uptr = dptr->units; /* unit 0 */ | |
return dptr; | |
} | |
for (i = 0; (dptr = sim_devices[i]) != NULL; i++) { /* base + unit#? */ | |
if (dptr->numunits && /* any units? */ | |
(((nptr = dptr->name) && | |
(strncmp (cptr, nptr, strlen (nptr)) == 0)) || | |
((nptr = dptr->lname) && | |
(strncmp (cptr, nptr, strlen (nptr)) == 0)))) { | |
tptr = cptr + strlen (nptr); | |
if (isdigit (*tptr)) { | |
if (qdisable (dptr)) /* disabled? */ | |
return NULL; | |
u = (uint32) get_uint (tptr, 10, dptr->numunits - 1, &r); | |
if (r != SCPE_OK) /* error? */ | |
*uptr = NULL; | |
else *uptr = dptr->units + u; | |
return dptr; | |
} | |
} | |
} | |
return NULL; | |
} | |
/* sim_register_internal_device Add device to internal device list | |
Inputs: | |
dptr = pointer to device | |
*/ | |
t_stat sim_register_internal_device (DEVICE *dptr) | |
{ | |
uint32 i; | |
for (i = 0; (sim_devices[i] != NULL); i++) | |
if (sim_devices[i] == dptr) | |
return SCPE_OK; | |
for (i = 0; i < sim_internal_device_count; i++) | |
if (sim_internal_devices[i] == dptr) | |
return SCPE_OK; | |
++sim_internal_device_count; | |
sim_internal_devices = realloc(sim_internal_devices, (sim_internal_device_count+1)*sizeof(*sim_internal_devices)); | |
sim_internal_devices[sim_internal_device_count-1] = dptr; | |
sim_internal_devices[sim_internal_device_count] = NULL; | |
return SCPE_OK; | |
} | |
/* Find_dev_from_unit find device for unit | |
Inputs: | |
uptr = pointer to unit | |
Outputs: | |
result = pointer to device | |
*/ | |
DEVICE *find_dev_from_unit (UNIT *uptr) | |
{ | |
DEVICE *dptr; | |
uint32 i, j; | |
if (uptr == NULL) | |
return NULL; | |
for (i = 0; (dptr = sim_devices[i]) != NULL; i++) { | |
for (j = 0; j < dptr->numunits; j++) { | |
if (uptr == (dptr->units + j)) | |
return dptr; | |
} | |
} | |
for (i = 0; i<sim_internal_device_count; i++) { | |
dptr = sim_internal_devices[i]; | |
for (j = 0; j < dptr->numunits; j++) { | |
if (uptr == (dptr->units + j)) | |
return dptr; | |
} | |
} | |
return NULL; | |
} | |
/* Test for disabled device */ | |
t_bool qdisable (DEVICE *dptr) | |
{ | |
return (dptr->flags & DEV_DIS? TRUE: FALSE); | |
} | |
/* find_reg_glob find globally unique register | |
Inputs: | |
cptr = pointer to input string | |
optr = pointer to output pointer (can be null) | |
gdptr = pointer to global device | |
Outputs: | |
result = pointer to register, NULL if error | |
*optr = pointer to next character in input string | |
*gdptr = pointer to device where found | |
*/ | |
REG *find_reg_glob (char *cptr, char **optr, DEVICE **gdptr) | |
{ | |
int32 i; | |
DEVICE *dptr; | |
REG *rptr, *srptr = NULL; | |
for (i = 0; (dptr = sim_devices[i]) != 0; i++) { /* all dev */ | |
if (dptr->flags & DEV_DIS) /* skip disabled */ | |
continue; | |
if ((rptr = find_reg (cptr, optr, dptr))) { /* found? */ | |
if (srptr) /* ambig? err */ | |
return NULL; | |
srptr = rptr; /* save reg */ | |
*gdptr = dptr; /* save unit */ | |
} | |
} | |
return srptr; | |
} | |
/* find_reg find register matching input string | |
Inputs: | |
cptr = pointer to input string | |
optr = pointer to output pointer (can be null) | |
dptr = pointer to device | |
Outputs: | |
result = pointer to register, NULL if error | |
*optr = pointer to next character in input string | |
*/ | |
REG *find_reg (char *cptr, char **optr, DEVICE *dptr) | |
{ | |
char *tptr; | |
REG *rptr; | |
size_t slnt; | |
if ((cptr == NULL) || (dptr == NULL) || (dptr->registers == NULL)) | |
return NULL; | |
tptr = cptr; | |
do { | |
tptr++; | |
} while (isalnum (*tptr) || (*tptr == '*') || (*tptr == '_') || (*tptr == '.')); | |
slnt = tptr - cptr; | |
for (rptr = dptr->registers; rptr->name != NULL; rptr++) { | |
if ((slnt == strlen (rptr->name)) && | |
(strncmp (cptr, rptr->name, slnt) == 0)) { | |
if (optr != NULL) | |
*optr = tptr; | |
return rptr; | |
} | |
} | |
return NULL; | |
} | |
/* get_switches get switches from input string | |
Inputs: | |
cptr = pointer to input string | |
Outputs: | |
sw = switch bit mask | |
0 if no switches, -1 if error | |
*/ | |
int32 get_switches (char *cptr) | |
{ | |
int32 sw; | |
if (*cptr != '-') | |
return 0; | |
sw = 0; | |
for (cptr++; (isspace (*cptr) == 0) && (*cptr != 0); cptr++) { | |
if (isalpha (*cptr) == 0) | |
return -1; | |
sw = sw | SWMASK (toupper (*cptr)); | |
} | |
return sw; | |
} | |
/* get_sim_sw accumulate sim_switches | |
Inputs: | |
cptr = pointer to input string | |
Outputs: | |
ptr = pointer to first non-string glyph | |
NULL if error | |
*/ | |
char *get_sim_sw (char *cptr) | |
{ | |
int32 lsw; | |
char gbuf[CBUFSIZE]; | |
while (*cptr == '-') { /* while switches */ | |
cptr = get_glyph (cptr, gbuf, 0); /* get switch glyph */ | |
lsw = get_switches (gbuf); /* parse */ | |
if (lsw <= 0) /* invalid? */ | |
return NULL; | |
sim_switches = sim_switches | lsw; /* accumulate */ | |
} | |
return cptr; | |
} | |
/* get_sim_opt get simulator command options | |
Inputs: | |
opt = command options | |
cptr = pointer to input string | |
Outputs: | |
ptr = pointer to next glypsh, NULL if error | |
*stat = error status | |
*/ | |
char *get_sim_opt (int32 opt, char *cptr, t_stat *st) | |
{ | |
int32 t; | |
char *svptr, gbuf[CBUFSIZE]; | |
DEVICE *tdptr; | |
UNIT *tuptr; | |
sim_switches = 0; /* no switches */ | |
sim_ofile = NULL; /* no output file */ | |
sim_schptr = NULL; /* no search */ | |
sim_stab.logic = SCH_OR; /* default search params */ | |
sim_stab.boolop = SCH_GE; | |
sim_stab.mask = 0; | |
sim_stab.comp = 0; | |
sim_dfdev = sim_dflt_dev; | |
sim_dfunit = sim_dfdev->units; | |
sim_opt_out = 0; /* no options yet */ | |
*st = SCPE_OK; | |
while (*cptr) { /* loop through modifiers */ | |
svptr = cptr; /* save current position */ | |
if ((opt & CMD_OPT_OF) && (*cptr == '@')) { /* output file spec? */ | |
if (sim_ofile) { /* already got one? */ | |
fclose (sim_ofile); /* one per customer */ | |
*st = SCPE_ARG; | |
return NULL; | |
} | |
cptr = get_glyph_nc (cptr + 1, gbuf, 0); | |
sim_ofile = sim_fopen (gbuf, "a"); /* open for append */ | |
if (sim_ofile == NULL) { /* open failed? */ | |
*st = SCPE_OPENERR; | |
return NULL; | |
} | |
sim_opt_out |= CMD_OPT_OF; /* got output file */ | |
continue; | |
} | |
cptr = get_glyph (cptr, gbuf, 0); | |
if ((t = get_switches (gbuf)) != 0) { /* try for switches */ | |
if (t < 0) { /* err if bad switch */ | |
*st = SCPE_INVSW; | |
return NULL; | |
} | |
sim_switches = sim_switches | t; /* or in new switches */ | |
} | |
else if ((opt & CMD_OPT_SCH) && /* if allowed, */ | |
get_search (gbuf, sim_dfdev->dradix, &sim_stab)) { /* try for search */ | |
sim_schptr = &sim_stab; /* set search */ | |
sim_opt_out |= CMD_OPT_SCH; /* got search */ | |
} | |
else if ((opt & CMD_OPT_DFT) && /* default allowed? */ | |
((sim_opt_out & CMD_OPT_DFT) == 0) && /* none yet? */ | |
(tdptr = find_unit (gbuf, &tuptr)) && /* try for default */ | |
(tuptr != NULL)) { | |
sim_dfdev = tdptr; /* set as default */ | |
sim_dfunit = tuptr; | |
sim_opt_out |= CMD_OPT_DFT; /* got default */ | |
} | |
else return svptr; /* not rec, break out */ | |
} | |
return cptr; | |
} | |
/* Match file extension | |
Inputs: | |
fnam = file name | |
ext = extension, without period | |
Outputs: | |
cp = pointer to final '.' if match, NULL if not | |
*/ | |
char *match_ext (char *fnam, char *ext) | |
{ | |
char *pptr, *fptr, *eptr; | |
if ((fnam == NULL) || (ext == NULL)) /* bad arguments? */ | |
return NULL; | |
pptr = strrchr (fnam, '.'); /* find last . */ | |
if (pptr) { /* any? */ | |
for (fptr = pptr + 1, eptr = ext; /* match characters */ | |
#if defined (VMS) /* VMS: stop at ; or null */ | |
(*fptr != 0) && (*fptr != ';'); | |
#else | |
*fptr != 0; /* others: stop at null */ | |
#endif | |
fptr++, eptr++) { | |
if (toupper (*fptr) != toupper (*eptr)) | |
return NULL; | |
} | |
if (*eptr != 0) /* ext exhausted? */ | |
return NULL; | |
} | |
return pptr; | |
} | |
/* Get search specification | |
Inputs: | |
cptr = pointer to input string | |
radix = radix for numbers | |
schptr = pointer to search table | |
Outputs: | |
return = NULL if error | |
schptr if valid search specification | |
*/ | |
SCHTAB *get_search (char *cptr, int32 radix, SCHTAB *schptr) | |
{ | |
int32 c, logop, cmpop; | |
t_value logval, cmpval; | |
char *sptr, *tptr; | |
const char logstr[] = "|&^", cmpstr[] = "=!><"; | |
logval = cmpval = 0; | |
if (*cptr == 0) /* check for clause */ | |
return NULL; | |
for (logop = cmpop = -1; (c = *cptr++); ) { /* loop thru clauses */ | |
if ((sptr = strchr (logstr, c))) { /* check for mask */ | |
logop = (int32)(sptr - logstr); | |
logval = strtotv (cptr, &tptr, radix); | |
if (cptr == tptr) | |
return NULL; | |
cptr = tptr; | |
} | |
else if ((sptr = strchr (cmpstr, c))) { /* check for boolop */ | |
cmpop = (int32)(sptr - cmpstr); | |
if (*cptr == '=') { | |
cmpop = cmpop + strlen (cmpstr); | |
cptr++; | |
} | |
cmpval = strtotv (cptr, &tptr, radix); | |
if (cptr == tptr) | |
return NULL; | |
cptr = tptr; | |
} | |
else return NULL; | |
} /* end for */ | |
if (logop >= 0) { | |
schptr->logic = logop; | |
schptr->mask = logval; | |
} | |
if (cmpop >= 0) { | |
schptr->boolop = cmpop; | |
schptr->comp = cmpval; | |
} | |
return schptr; | |
} | |
/* Test value against search specification | |
Inputs: | |
val = value to test | |
schptr = pointer to search table | |
Outputs: | |
return = 1 if value passes search criteria, 0 if not | |
*/ | |
int32 test_search (t_value val, SCHTAB *schptr) | |
{ | |
if (schptr == NULL) return 0; | |
switch (schptr->logic) { /* case on logical */ | |
case SCH_OR: | |
val = val | schptr->mask; | |
break; | |
case SCH_AND: | |
val = val & schptr->mask; | |
break; | |
case SCH_XOR: | |
val = val ^ schptr->mask; | |
break; | |
} | |
switch (schptr->boolop) { /* case on comparison */ | |
case SCH_E: case SCH_EE: | |
return (val == schptr->comp); | |
case SCH_N: case SCH_NE: | |
return (val != schptr->comp); | |
case SCH_G: | |
return (val > schptr->comp); | |
case SCH_GE: | |
return (val >= schptr->comp); | |
case SCH_L: | |
return (val < schptr->comp); | |
case SCH_LE: | |
return (val <= schptr->comp); | |
} | |
return 0; | |
} | |
/* Radix independent input/output package | |
strtotv - general radix input routine | |
Inputs: | |
inptr = string to convert | |
endptr = pointer to first unconverted character | |
radix = radix for input | |
Outputs: | |
value = converted value | |
On an error, the endptr will equal the inptr. | |
*/ | |
t_value strtotv (const char *inptr, char **endptr, uint32 radix) | |
{ | |
int32 nodigit; | |
t_value val; | |
uint32 c, digit; | |
*endptr = (char *)inptr; /* assume fails */ | |
if ((radix < 2) || (radix > 36)) | |
return 0; | |
while (isspace (*inptr)) /* bypass white space */ | |
inptr++; | |
val = 0; | |
nodigit = 1; | |
for (c = *inptr; isalnum(c); c = *++inptr) { /* loop through char */ | |
if (islower (c)) | |
c = toupper (c); | |
if (isdigit (c)) /* digit? */ | |
digit = c - (uint32) '0'; | |
else if (radix <= 10) /* stop if not expected */ | |
break; | |
else digit = c + 10 - (uint32) 'A'; /* convert letter */ | |
if (digit >= radix) /* valid in radix? */ | |
return 0; | |
val = (val * radix) + digit; /* add to value */ | |
nodigit = 0; | |
} | |
if (nodigit) /* no digits? */ | |
return 0; | |
*endptr = (char *)inptr; /* result pointer */ | |
return val; | |
} | |
/* fprint_val - general radix printing routine | |
Inputs: | |
stream = stream designator | |
val = value to print | |
radix = radix to print | |
width = width to print | |
format = leading zeroes format | |
Outputs: | |
status = error status | |
if stream is NULL, returns length of output that would | |
have been generated. | |
*/ | |
t_stat sprint_val (char *buffer, t_value val, uint32 radix, | |
uint32 width, uint32 format) | |
{ | |
#define MAX_WIDTH ((int) ((CHAR_BIT * sizeof (t_value) * 4 + 3)/3)) | |
t_value owtest, wtest; | |
int32 d, digit, ndigits, commas = 0; | |
char dbuf[MAX_WIDTH + 1]; | |
for (d = 0; d < MAX_WIDTH; d++) | |
dbuf[d] = (format == PV_RZRO)? '0': ' '; | |
dbuf[MAX_WIDTH] = 0; | |
d = MAX_WIDTH; | |
do { | |
d = d - 1; | |
digit = (int32) (val % radix); | |
val = val / radix; | |
dbuf[d] = (digit <= 9)? '0' + digit: 'A' + (digit - 10); | |
} while ((d > 0) && (val != 0)); | |
switch (format) { | |
case PV_LEFT: | |
break; | |
case PV_RCOMMA: | |
for (digit = 0; digit < MAX_WIDTH; digit++) | |
if (dbuf[digit] != ' ') | |
break; | |
ndigits = MAX_WIDTH - digit; | |
commas = (ndigits - 1)/3; | |
for (digit=0; digit<ndigits-3; digit++) | |
dbuf[MAX_WIDTH + (digit - ndigits) - (ndigits - digit - 1)/3] = dbuf[MAX_WIDTH + (digit - ndigits)]; | |
for (digit=1; digit<=commas; digit++) | |
dbuf[MAX_WIDTH - (digit * 4)] = ','; | |
d = d - commas; | |
if (width > MAX_WIDTH) { | |
if (!buffer) | |
return width; | |
sprintf (buffer, "%*s", -((int)width), dbuf); | |
return SCPE_OK; | |
} | |
else | |
if (width > 0) | |
d = MAX_WIDTH - width; | |
break; | |
case PV_RZRO: | |
case PV_RSPC: | |
wtest = owtest = radix; | |
ndigits = 1; | |
while ((wtest < width_mask[width]) && (wtest >= owtest)) { | |
owtest = wtest; | |
wtest = wtest * radix; | |
ndigits = ndigits + 1; | |
} | |
if ((MAX_WIDTH - (ndigits + commas)) < d) | |
d = MAX_WIDTH - (ndigits + commas); | |
break; | |
} | |
if (!buffer) | |
return strlen(dbuf+d); | |
if (width < strlen(dbuf+d)) | |
return SCPE_IOERR; | |
strcpy(buffer, dbuf+d); | |
return SCPE_OK; | |
} | |
t_stat fprint_val (FILE *stream, t_value val, uint32 radix, | |
uint32 width, uint32 format) | |
{ | |
char dbuf[MAX_WIDTH + 1]; | |
t_stat r; | |
if (!stream) | |
return sprint_val (NULL, val, radix, width, format); | |
if (width > MAX_WIDTH) | |
width = MAX_WIDTH; | |
r = sprint_val (dbuf, val, radix, width, format); | |
if (fputs (dbuf, stream) == EOF) | |
return SCPE_IOERR; | |
return SCPE_OK; | |
} | |
/* Event queue package | |
sim_activate add entry to event queue | |
sim_activate_abs add entry to event queue even if event already scheduled | |
sim_activate_notbefore add entry to event queue even if event already scheduled | |
but not before the specified time | |
sim_activate_after add entry to event queue after a specified amount of wall time | |
sim_cancel remove entry from event queue | |
sim_process_event process entries on event queue | |
sim_is_active see if entry is on event queue | |
sim_activate_time return time until activation | |
sim_atime return absolute time for an entry | |
sim_gtime return global time | |
sim_qcount return event queue entry count | |
Asynchronous events are set up by queueing a unit data structure | |
to the event queue with a timeout (in simulator units, relative | |
to the current time). Each simulator 'times' these events by | |
counting down interval counter sim_interval. When this reaches | |
zero the simulator calls sim_process_event to process the event | |
and to see if further events need to be processed, or sim_interval | |
reset to count the next one. | |
The event queue is maintained in clock order; entry timeouts are | |
RELATIVE to the time in the previous entry. | |
sim_process_event - process event | |
Inputs: | |
none | |
Outputs: | |
reason = reason code returned by any event processor, | |
or 0 (SCPE_OK) if no exceptions | |
*/ | |
t_stat sim_process_event (void) | |
{ | |
UNIT *uptr; | |
t_stat reason; | |
if (stop_cpu) /* stop CPU? */ | |
return SCPE_STOP; | |
AIO_UPDATE_QUEUE; | |
UPDATE_SIM_TIME; /* update sim time */ | |
if (sim_clock_queue == QUEUE_LIST_END) { /* queue empty? */ | |
sim_interval = noqueue_time = NOQUEUE_WAIT; /* flag queue empty */ | |
sim_debug (SIM_DBG_EVENT, sim_dflt_dev, "Queue Emptry New Interval = %d\n", sim_interval); | |
return SCPE_OK; | |
} | |
do { | |
uptr = sim_clock_queue; /* get first */ | |
sim_clock_queue = uptr->next; /* remove first */ | |
uptr->next = NULL; /* hygiene */ | |
uptr->time = 0; | |
if (sim_clock_queue != QUEUE_LIST_END) | |
sim_interval = sim_clock_queue->time; | |
else | |
sim_interval = noqueue_time = NOQUEUE_WAIT; | |
sim_debug (SIM_DBG_EVENT, sim_dflt_dev, "Processing Event for %s\n", sim_uname (uptr)); | |
AIO_EVENT_BEGIN(uptr); | |
if (uptr->action != NULL) | |
reason = uptr->action (uptr); | |
else | |
reason = SCPE_OK; | |
AIO_EVENT_COMPLETE(uptr, reason); | |
} while ((reason == SCPE_OK) && | |
(sim_interval <= 0) && | |
(sim_clock_queue != QUEUE_LIST_END)); | |
if (sim_clock_queue == QUEUE_LIST_END) { /* queue empty? */ | |
sim_interval = noqueue_time = NOQUEUE_WAIT; /* flag queue empty */ | |
sim_debug (SIM_DBG_EVENT, sim_dflt_dev, "Processing Queue Complete New Interval = %d\n", sim_interval); | |
} | |
else | |
sim_debug (SIM_DBG_EVENT, sim_dflt_dev, "Processing Queue Complete New Interval = %d(%s)\n", sim_interval, sim_uname(sim_clock_queue)); | |
return reason; | |
} | |
/* sim_activate - activate (queue) event | |
Inputs: | |
uptr = pointer to unit | |
event_time = relative timeout | |
Outputs: | |
reason = result (SCPE_OK if ok) | |
*/ | |
t_stat sim_activate (UNIT *uptr, int32 event_time) | |
{ | |
return _sim_activate (uptr, event_time); | |
} | |
t_stat _sim_activate (UNIT *uptr, int32 event_time) | |
{ | |
UNIT *cptr, *prvptr; | |
int32 accum; | |
AIO_ACTIVATE (_sim_activate, uptr, event_time); | |
if (sim_is_active (uptr)) /* already active? */ | |
return SCPE_OK; | |
UPDATE_SIM_TIME; /* update sim time */ | |
sim_debug (SIM_DBG_ACTIVATE, sim_dflt_dev, "Activating %s delay=%d\n", sim_uname (uptr), event_time); | |
prvptr = NULL; | |
accum = 0; | |
for (cptr = sim_clock_queue; cptr != QUEUE_LIST_END; cptr = cptr->next) { | |
if (event_time < (accum + cptr->time)) | |
break; | |
accum = accum + cptr->time; | |
prvptr = cptr; | |
} | |
if (prvptr == NULL) { /* insert at head */ | |
cptr = uptr->next = sim_clock_queue; | |
sim_clock_queue = uptr; | |
} | |
else { | |
cptr = uptr->next = prvptr->next; /* insert at prvptr */ | |
prvptr->next = uptr; | |
} | |
uptr->time = event_time - accum; | |
if (cptr != QUEUE_LIST_END) | |
cptr->time = cptr->time - uptr->time; | |
sim_interval = sim_clock_queue->time; | |
return SCPE_OK; | |
} | |
/* sim_activate_abs - activate (queue) event even if event already scheduled | |
Inputs: | |
uptr = pointer to unit | |
event_time = relative timeout | |
Outputs: | |
reason = result (SCPE_OK if ok) | |
*/ | |
t_stat sim_activate_abs (UNIT *uptr, int32 event_time) | |
{ | |
AIO_ACTIVATE (sim_activate_abs, uptr, event_time); | |
sim_cancel (uptr); | |
return _sim_activate (uptr, event_time); | |
} | |
/* sim_activate_notbefore - activate (queue) event even if event already scheduled | |
but not before the specified time | |
Inputs: | |
uptr = pointer to unit | |
rtime = relative timeout | |
Outputs: | |
reason = result (SCPE_OK if ok) | |
*/ | |
t_stat sim_activate_notbefore (UNIT *uptr, int32 rtime) | |
{ | |
uint32 rtimenow, urtime = (uint32)rtime; | |
AIO_ACTIVATE (sim_activate_notbefore, uptr, rtime); | |
sim_cancel (uptr); | |
rtimenow = sim_grtime(); | |
sim_cancel (uptr); | |
if (0x80000000 <= urtime-rtimenow) | |
return _sim_activate (uptr, 0); | |
else | |
return sim_activate (uptr, urtime-rtimenow); | |
} | |
/* sim_activate_after - activate (queue) event | |
Inputs: | |
uptr = pointer to unit | |
usec_delay = relative timeout (in microseconds) | |
Outputs: | |
reason = result (SCPE_OK if ok) | |
*/ | |
t_stat sim_activate_after (UNIT *uptr, int32 event_time) | |
{ | |
return _sim_activate_after (uptr, event_time); | |
} | |
t_stat _sim_activate_after (UNIT *uptr, int32 usec_delay) | |
{ | |
if (sim_is_active (uptr)) /* already active? */ | |
return SCPE_OK; | |
AIO_ACTIVATE (_sim_activate_after, uptr, usec_delay); | |
return sim_timer_activate_after (uptr, usec_delay); | |
} | |
/* sim_cancel - cancel (dequeue) event | |
Inputs: | |
uptr = pointer to unit | |
Outputs: | |
reason = result (SCPE_OK if ok) | |
*/ | |
t_stat sim_cancel (UNIT *uptr) | |
{ | |
UNIT *cptr, *nptr; | |
AIO_VALIDATE; | |
AIO_CANCEL(uptr); | |
AIO_UPDATE_QUEUE; | |
if (sim_clock_queue == QUEUE_LIST_END) | |
return SCPE_OK; | |
sim_debug (SIM_DBG_EVENT, sim_dflt_dev, "Canceling Event for %s\n", sim_uname(uptr)); | |
UPDATE_SIM_TIME; /* update sim time */ | |
if (!sim_is_active (uptr)) | |
return SCPE_OK; | |
nptr = QUEUE_LIST_END; | |
if (sim_clock_queue == uptr) { | |
nptr = sim_clock_queue = uptr->next; | |
uptr->next = NULL; /* hygiene */ | |
} | |
else { | |
for (cptr = sim_clock_queue; cptr != QUEUE_LIST_END; cptr = cptr->next) { | |
if (cptr->next == uptr) { | |
nptr = cptr->next = uptr->next; | |
uptr->next = NULL; /* hygiene */ | |
break; /* end queue scan */ | |
} | |
} | |
} | |
if (nptr != QUEUE_LIST_END) | |
nptr->time += (uptr->next) ? 0 : uptr->time; | |
if (!uptr->next) | |
uptr->time = 0; | |
if (sim_clock_queue != QUEUE_LIST_END) | |
sim_interval = sim_clock_queue->time; | |
else sim_interval = noqueue_time = NOQUEUE_WAIT; | |
if (uptr->next) { | |
if (sim_deb) { | |
sim_debug (SIM_DBG_EVENT, sim_dflt_dev, "Cancel failed for %s\n", sim_uname(uptr)); | |
fclose(sim_deb); | |
} | |
abort (); | |
} | |
return SCPE_OK; | |
} | |
/* sim_is_active - test for entry in queue | |
Inputs: | |
uptr = pointer to unit | |
Outputs: | |
result = TRUE if unit is busy, FALSE inactive | |
*/ | |
t_bool sim_is_active (UNIT *uptr) | |
{ | |
AIO_VALIDATE; | |
AIO_UPDATE_QUEUE; | |
return (((uptr->next) || AIO_IS_ACTIVE(uptr)) ? TRUE : FALSE); | |
} | |
/* sim_activate_time - return activation time | |
Inputs: | |
uptr = pointer to unit | |
Outputs: | |
result = absolute activation time + 1, 0 if inactive | |
*/ | |
int32 sim_activate_time (UNIT *uptr) | |
{ | |
UNIT *cptr; | |
int32 accum = 0; | |
AIO_VALIDATE; | |
AIO_RETURN_TIME(uptr); | |
for (cptr = sim_clock_queue; cptr != QUEUE_LIST_END; cptr = cptr->next) { | |
if (cptr == sim_clock_queue) { | |
if (sim_interval > 0) | |
accum = accum + sim_interval; | |
} | |
else accum = accum + cptr->time; | |
if (cptr == uptr) | |
return accum + 1; | |
} | |
return 0; | |
} | |
/* sim_gtime - return global time | |
sim_grtime - return global time with rollover | |
Inputs: none | |
Outputs: | |
time = global time | |
*/ | |
double sim_gtime (void) | |
{ | |
if (AIO_MAIN_THREAD) { | |
UPDATE_SIM_TIME; | |
} | |
return sim_time; | |
} | |
uint32 sim_grtime (void) | |
{ | |
UPDATE_SIM_TIME; | |
return sim_rtime; | |
} | |
/* sim_qcount - return queue entry count | |
Inputs: none | |
Outputs: | |
count = number of entries on the queue | |
*/ | |
int32 sim_qcount (void) | |
{ | |
int32 cnt; | |
UNIT *uptr; | |
cnt = 0; | |
for (uptr = sim_clock_queue; uptr != QUEUE_LIST_END; uptr = uptr->next) | |
cnt++; | |
return cnt; | |
} | |
/* Breakpoint package. This module replaces the VM-implemented one | |
instruction breakpoint capability. | |
Breakpoints are stored in table sim_brk_tab, which is ordered by address for | |
efficient binary searching. A breakpoint consists of a four entry structure: | |
addr address of the breakpoint | |
type types of breakpoints set on the address | |
a bit mask representing letters A-Z | |
cnt number of iterations before breakp is taken | |
action pointer command string to be executed | |
when break is taken | |
sim_brk_summ is a summary of the types of breakpoints that are currently set (it | |
is the bitwise OR of all the type fields). A simulator need only check for | |
a breakpoint of type X if bit SWMASK('X') is set in sim_brk_sum. | |
The package contains the following public routines: | |
sim_brk_init initialize | |
sim_brk_set set breakpoint | |
sim_brk_clr clear breakpoint | |
sim_brk_clrall clear all breakpoints | |
sim_brk_show show breakpoint | |
sim_brk_showall show all breakpoints | |
sim_brk_test test for breakpoint | |
sim_brk_npc PC has been changed | |
sim_brk_getact get next action | |
sim_brk_clract clear pending actions | |
Initialize breakpoint system. | |
*/ | |
t_stat sim_brk_init (void) | |
{ | |
sim_brk_lnt = SIM_BRK_INILNT; | |
sim_brk_tab = (BRKTAB *) calloc (sim_brk_lnt, sizeof (BRKTAB)); | |
if (sim_brk_tab == NULL) | |
return SCPE_MEM; | |
sim_brk_ent = sim_brk_ins = 0; | |
sim_brk_act[sim_do_depth] = NULL; | |
sim_brk_npc (0); | |
return SCPE_OK; | |
} | |
/* Search for a breakpoint in the sorted breakpoint table */ | |
BRKTAB *sim_brk_fnd (t_addr loc) | |
{ | |
int32 lo, hi, p; | |
BRKTAB *bp; | |
if (sim_brk_ent == 0) { /* table empty? */ | |
sim_brk_ins = 0; /* insrt at head */ | |
return NULL; /* sch fails */ | |
} | |
lo = 0; /* initial bounds */ | |
hi = sim_brk_ent - 1; | |
do { | |
p = (lo + hi) >> 1; /* probe */ | |
bp = sim_brk_tab + p; /* table addr */ | |
if (loc == bp->addr) /* match? */ | |
return bp; | |
else if (loc < bp->addr) /* go down? p is upper */ | |
hi = p - 1; | |
else lo = p + 1; /* go up? p is lower */ | |
} while (lo <= hi); | |
if (loc < bp->addr) /* insrt before or */ | |
sim_brk_ins = p; | |
else sim_brk_ins = p + 1; /* after last sch */ | |
return NULL; | |
} | |
/* Insert a breakpoint */ | |
BRKTAB *sim_brk_new (t_addr loc) | |
{ | |
int32 i, t; | |
BRKTAB *bp, *newp; | |
if (sim_brk_ins < 0) | |
return NULL; | |
if (sim_brk_ent >= sim_brk_lnt) { /* out of space? */ | |
t = sim_brk_lnt + SIM_BRK_INILNT; /* new size */ | |
newp = (BRKTAB *) calloc (t, sizeof (BRKTAB)); /* new table */ | |
if (newp == NULL) /* can't extend */ | |
return NULL; | |
for (i = 0; i < sim_brk_lnt; i++) /* copy table */ | |
*(newp + i) = *(sim_brk_tab + i); | |
free (sim_brk_tab); /* free old table */ | |
sim_brk_tab = newp; /* new base, lnt */ | |
sim_brk_lnt = t; | |
} | |
if (sim_brk_ins != sim_brk_ent) { /* move needed? */ | |
for (bp = sim_brk_tab + sim_brk_ent; | |
bp > sim_brk_tab + sim_brk_ins; bp--) | |
*bp = *(bp - 1); | |
} | |
bp = sim_brk_tab + sim_brk_ins; | |
bp->addr = loc; | |
bp->typ = 0; | |
bp->cnt = 0; | |
bp->act = NULL; | |
sim_brk_ent = sim_brk_ent + 1; | |
return bp; | |
} | |
/* Set a breakpoint of type sw */ | |
t_stat sim_brk_set (t_addr loc, int32 sw, int32 ncnt, char *act) | |
{ | |
BRKTAB *bp; | |
if (sw == 0) sw = sim_brk_dflt; | |
if ((sim_brk_types & sw) == 0) | |
return SCPE_NOFNC; | |
bp = sim_brk_fnd (loc); /* present? */ | |
if (!bp) /* no, allocate */ | |
bp = sim_brk_new (loc); | |
if (!bp) /* still no? mem err */ | |
return SCPE_MEM; | |
bp->typ = sw; /* set type */ | |
bp->cnt = ncnt; /* set count */ | |
if ((bp->act != NULL) && (act != NULL)) { /* replace old action? */ | |
free (bp->act); /* deallocate */ | |
bp->act = NULL; /* now no action */ | |
} | |
if ((act != NULL) && (*act != 0)) { /* new action? */ | |
char *newp = (char *) calloc (CBUFSIZE, sizeof (char)); /* alloc buf */ | |
if (newp == NULL) /* mem err? */ | |
return SCPE_MEM; | |
strncpy (newp, act, CBUFSIZE); /* copy action */ | |
bp->act = newp; /* set pointer */ | |
} | |
sim_brk_summ = sim_brk_summ | sw; | |
return SCPE_OK; | |
} | |
/* Clear a breakpoint */ | |
t_stat sim_brk_clr (t_addr loc, int32 sw) | |
{ | |
BRKTAB *bp = sim_brk_fnd (loc); | |
if (!bp) /* not there? ok */ | |
return SCPE_OK; | |
if (sw == 0) | |
sw = SIM_BRK_ALLTYP; | |
bp->typ = bp->typ & ~sw; | |
if (bp->typ) /* clear all types? */ | |
return SCPE_OK; | |
if (bp->act != NULL) /* deallocate action */ | |
free (bp->act); | |
for ( ; bp < (sim_brk_tab + sim_brk_ent - 1); bp++) /* erase entry */ | |
*bp = *(bp + 1); | |
sim_brk_ent = sim_brk_ent - 1; /* decrement count */ | |
sim_brk_summ = 0; /* recalc summary */ | |
for (bp = sim_brk_tab; bp < (sim_brk_tab + sim_brk_ent); bp++) | |
sim_brk_summ = sim_brk_summ | bp->typ; | |
return SCPE_OK; | |
} | |
/* Clear all breakpoints */ | |
t_stat sim_brk_clrall (int32 sw) | |
{ | |
BRKTAB *bp; | |
if (sw == 0) sw = SIM_BRK_ALLTYP; | |
for (bp = sim_brk_tab; bp < (sim_brk_tab + sim_brk_ent); ) { | |
if (bp->typ & sw) | |
sim_brk_clr (bp->addr, sw); | |
else bp++; | |
} | |
return SCPE_OK; | |
} | |
/* Show a breakpoint */ | |
t_stat sim_brk_show (FILE *st, t_addr loc, int32 sw) | |
{ | |
BRKTAB *bp = sim_brk_fnd (loc); | |
DEVICE *dptr; | |
int32 i, any; | |
if (sw == 0) | |
sw = SIM_BRK_ALLTYP; | |
if (!bp || (!(bp->typ & sw))) | |
return SCPE_OK; | |
dptr = sim_dflt_dev; | |
if (dptr == NULL) | |
return SCPE_OK; | |
if (sim_vm_fprint_addr) | |
sim_vm_fprint_addr (st, dptr, loc); | |
else fprint_val (st, loc, dptr->aradix, dptr->awidth, PV_LEFT); | |
fprintf (st, ":\t"); | |
for (i = any = 0; i < 26; i++) { | |
if ((bp->typ >> i) & 1) { | |
if (any) | |
fprintf (st, ", "); | |
fputc (i + 'A', st); | |
any = 1; | |
} | |
} | |
if (bp->cnt > 0) | |
fprintf (st, " [%d]", bp->cnt); | |
if (bp->act != NULL) | |
fprintf (st, "; %s", bp->act); | |
fprintf (st, "\n"); | |
return SCPE_OK; | |
} | |
/* Show all breakpoints */ | |
t_stat sim_brk_showall (FILE *st, int32 sw) | |
{ | |
BRKTAB *bp; | |
if (sw == 0) | |
sw = SIM_BRK_ALLTYP; | |
for (bp = sim_brk_tab; bp < (sim_brk_tab + sim_brk_ent); bp++) { | |
if (bp->typ & sw) | |
sim_brk_show (st, bp->addr, sw); | |
} | |
return SCPE_OK; | |
} | |
/* Test for breakpoint */ | |
uint32 sim_brk_test (t_addr loc, uint32 btyp) | |
{ | |
BRKTAB *bp; | |
uint32 spc = (btyp >> SIM_BKPT_V_SPC) & (SIM_BKPT_N_SPC - 1); | |
if ((bp = sim_brk_fnd (loc)) && (btyp & bp->typ)) { /* in table, type match? */ | |
if ((sim_brk_pend[spc] && (loc == sim_brk_ploc[spc])) || /* previous location? */ | |
(--bp->cnt > 0)) /* count > 0? */ | |
return 0; | |
bp->cnt = 0; /* reset count */ | |
sim_brk_ploc[spc] = loc; /* save location */ | |
sim_brk_pend[spc] = TRUE; /* don't do twice */ | |
sim_brk_act[sim_do_depth] = bp->act; /* set up actions */ | |
return (btyp & bp->typ); | |
} | |
sim_brk_pend[spc] = FALSE; | |
return 0; | |
} | |
/* Get next pending action, if any */ | |
char *sim_brk_getact (char *buf, int32 size) | |
{ | |
char *ep; | |
size_t lnt; | |
if (sim_brk_act[sim_do_depth] == NULL) /* any action? */ | |
return NULL; | |
while (isspace (*sim_brk_act[sim_do_depth])) /* skip spaces */ | |
sim_brk_act[sim_do_depth]++; | |
if (*sim_brk_act[sim_do_depth] == 0) /* now empty? */ | |
return (sim_brk_act[sim_do_depth] = NULL); | |
if ((ep = strchr (sim_brk_act[sim_do_depth], ';'))) { /* cmd delimiter? */ | |
lnt = ep - sim_brk_act[sim_do_depth]; /* cmd length */ | |
memcpy (buf, sim_brk_act[sim_do_depth], lnt + 1); /* copy with ; */ | |
buf[lnt] = 0; /* erase ; */ | |
sim_brk_act[sim_do_depth] += lnt + 1; /* adv ptr */ | |
} | |
else { | |
strncpy (buf, sim_brk_act[sim_do_depth], size); /* copy action */ | |
sim_brk_act[sim_do_depth] = NULL; /* no more */ | |
} | |
return buf; | |
} | |
/* Clear pending actions */ | |
void sim_brk_clract (void) | |
{ | |
sim_brk_act[sim_do_depth] = NULL; | |
} | |
/* New PC */ | |
void sim_brk_npc (uint32 cnt) | |
{ | |
uint32 i; | |
if ((cnt == 0) || (cnt > SIM_BKPT_N_SPC)) | |
cnt = SIM_BKPT_N_SPC; | |
for (i = 0; i < cnt; i++) { | |
sim_brk_pend[i] = FALSE; | |
sim_brk_ploc[i] = 0; | |
} | |
return; | |
} | |
/* Clear breakpoint space */ | |
void sim_brk_clrspc (uint32 spc) | |
{ | |
if (spc < SIM_BKPT_N_SPC) { | |
sim_brk_pend[spc] = FALSE; | |
sim_brk_ploc[spc] = 0; | |
} | |
return; | |
} | |
/* Message Text */ | |
const char *sim_error_text (t_stat stat) | |
{ | |
static char msgbuf[64]; | |
stat &= ~(SCPE_KFLAG|SCPE_BREAK|SCPE_NOMESSAGE); /* remove any flags */ | |
if (stat == SCPE_OK) | |
return "No Error"; | |
if ((stat >= SCPE_BASE) && (stat <= SCPE_MAX_ERR)) | |
return scp_errors[stat-SCPE_BASE].message; | |
sprintf(msgbuf, "Error %d", stat); | |
return msgbuf; | |
} | |
t_stat sim_string_to_stat (char *cptr, t_stat *stat) | |
{ | |
char gbuf[CBUFSIZE]; | |
int32 cond; | |
*stat = SCPE_ARG; | |
cptr = get_glyph (cptr, gbuf, 0); | |
if (0 == memcmp("SCPE_", gbuf, 5)) | |
strcpy (gbuf, gbuf+5); /* skip leading SCPE_ */ | |
for (cond=0; cond < (SCPE_MAX_ERR-SCPE_BASE); cond++) | |
if (0 == strcmp(scp_errors[cond].code, gbuf)) { | |
cond += SCPE_BASE; | |
break; | |
} | |
if (0 == strcmp(gbuf, "OK")) | |
cond = SCPE_OK; | |
if (cond == (SCPE_MAX_ERR-SCPE_BASE)) { /* not found? */ | |
if (0 == (cond = strtol(gbuf, NULL, 0))) /* try explicit number */ | |
return SCPE_ARG; | |
} | |
if (cond > SCPE_MAX_ERR) | |
return SCPE_ARG; | |
*stat = cond; | |
return SCPE_OK; | |
} | |
/* Debug printout routines, from Dave Hittner */ | |
const char* debug_bstates = "01_^"; | |
char debug_line_prefix[256]; | |
int32 debug_unterm = 0; | |
/* Finds debug phrase matching bitmask from from device DEBTAB table */ | |
static char* get_dbg_verb (uint32 dbits, DEVICE* dptr) | |
{ | |
static char* debtab_none = "DEBTAB_ISNULL"; | |
static char* debtab_nomatch = "DEBTAB_NOMATCH"; | |
int32 offset = 0; | |
if (dptr->debflags == 0) | |
return debtab_none; | |
/* Find matching words for bitmask */ | |
while (dptr->debflags[offset].name && (offset < 32)) { | |
if (dptr->debflags[offset].mask & dbits) | |
return dptr->debflags[offset].name; | |
offset++; | |
} | |
return debtab_nomatch; | |
} | |
/* Prints standard debug prefix unless previous call unterminated */ | |
static const char *sim_debug_prefix (uint32 dbits, DEVICE* dptr) | |
{ | |
char* debug_type = get_dbg_verb (dbits, dptr); | |
static const char* debug_fmt = "DBG(%.0f)%s> %s %s: "; | |
char tim_t[32] = ""; | |
char tim_a[32] = ""; | |
char pc_s[64] = ""; | |
struct timespec time_now; | |
if (sim_deb_switches & (SWMASK ('T') | SWMASK ('R') | SWMASK ('A'))) { | |
clock_gettime(CLOCK_REALTIME, &time_now); | |
if (sim_deb_switches & SWMASK ('R')) | |
sim_timespec_diff (&time_now, &time_now, &sim_deb_basetime); | |
} | |
if (sim_deb_switches & SWMASK ('T')) { | |
time_t tnow = (time_t)time_now.tv_sec; | |
struct tm *now = gmtime(&tnow); | |
sprintf(tim_t, "%02d:%02d:%02d.%03d ", now->tm_hour, now->tm_min, now->tm_sec, (int)(time_now.tv_nsec/1000000)); | |
} | |
if (sim_deb_switches & SWMASK ('A')) { | |
sprintf(tim_t, "%lld.%03d ", (long long)(time_now.tv_sec), (int)(time_now.tv_nsec/1000000)); | |
} | |
if (sim_deb_switches & SWMASK ('P')) { | |
t_value val = get_rval (sim_deb_PC, 0); | |
sprintf(pc_s, "-%s:", sim_deb_PC->name); | |
sprint_val (&pc_s[strlen(pc_s)], val, sim_deb_PC->radix, sim_deb_PC->width, sim_deb_PC->flags & REG_FMT); | |
} | |
sprintf(debug_line_prefix, "DBG(%s%s%.0f%s)%s> %s %s: ", tim_t, tim_a, sim_gtime(), pc_s, AIO_MAIN_THREAD ? "" : "+", dptr->name, debug_type); | |
return debug_line_prefix; | |
} | |
void fprint_fields (FILE *stream, t_value before, t_value after, BITFIELD* bitdefs) | |
{ | |
int32 i, fields, offset; | |
uint32 value, beforevalue, mask; | |
for (fields=offset=0; bitdefs[fields].name; ++fields) { | |
if (bitdefs[fields].offset == 0xffffffff) /* fixup uninitialized offsets */ | |
bitdefs[fields].offset = offset; | |
offset += bitdefs[fields].width; | |
} | |
for (i = fields-1; i >= 0; i--) { /* print xlation, transition */ | |
if (bitdefs[i].name[0] == '\0') | |
continue; | |
if ((bitdefs[i].width == 1) && (bitdefs[i].valuenames == NULL)) { | |
int off = ((after >> bitdefs[i].offset) & 1) + (((before ^ after) >> bitdefs[i].offset) & 1) * 2; | |
fprintf(stream, "%s%c ", bitdefs[i].name, debug_bstates[off]); | |
} | |
else { | |
char *delta = ""; | |
mask = 0xFFFFFFFF >> (32-bitdefs[i].width); | |
value = (uint32)((after >> bitdefs[i].offset) & mask); | |
beforevalue = (uint32)((before >> bitdefs[i].offset) & mask); | |
if (value < beforevalue) | |
delta = "_"; | |
if (value > beforevalue) | |
delta = "^"; | |
if (bitdefs[i].valuenames) | |
fprintf(stream, "%s=%s%s ", bitdefs[i].name, delta, bitdefs[i].valuenames[value]); | |
else | |
if (bitdefs[i].format) { | |
fprintf(stream, "%s=%s", bitdefs[i].name, delta); | |
fprintf(stream, bitdefs[i].format, value); | |
fprintf(stream, " "); | |
} | |
else | |
fprintf(stream, "%s=%s0x%X ", bitdefs[i].name, delta, value); | |
} | |
} | |
} | |
/* Prints state of a register: bit translation + state (0,1,_,^) | |
indicating the state and transition of the bit and bitfields. States: | |
0=steady(0->0), 1=steady(1->1), _=falling(1->0), ^=rising(0->1) */ | |
void sim_debug_bits(uint32 dbits, DEVICE* dptr, BITFIELD* bitdefs, | |
uint32 before, uint32 after, int terminate) | |
{ | |
if (sim_deb && (dptr->dctrl & dbits)) { | |
if (!debug_unterm) | |
fprintf(sim_deb, "%s", sim_debug_prefix(dbits, dptr)); /* print prefix if required */ | |
fprint_fields (sim_deb, (t_value)before, (t_value)after, bitdefs); /* print xlation, transition */ | |
if (terminate) | |
fprintf(sim_deb, "\r\n"); | |
debug_unterm = terminate ? 0 : 1; /* set unterm for next */ | |
} | |
} | |
/* Inline debugging - will print debug message if debug file is | |
set and the bitmask matches the current device debug options. | |
Extra returns are added for un*x systems, since the output | |
device is set into 'raw' mode when the cpu is booted, | |
and the extra returns don't hurt any other systems. | |
Callers should be calling sim_debug() which is a macro | |
defined in scp.h which evaluates the action condition before | |
incurring call overhead. */ | |
void _sim_debug (uint32 dbits, DEVICE* dptr, const char* fmt, ...) | |
{ | |
if (sim_deb && (dptr->dctrl & dbits)) { | |
char stackbuf[STACKBUFSIZE]; | |
int32 bufsize = sizeof(stackbuf); | |
char *buf = stackbuf; | |
va_list arglist; | |
int32 i, j, len; | |
char* debug_type = get_dbg_verb (dbits, dptr); | |
const char* debug_prefix = sim_debug_prefix(dbits, dptr); /* prefix to print if required */ | |
buf[bufsize-1] = '\0'; | |
while (1) { /* format passed string, args */ | |
va_start (arglist, fmt); | |
#if defined(NO_vsnprintf) | |
#if defined(HAS_vsprintf_void) | |
/* Note, this could blow beyond the buffer, and we couldn't tell */ | |
/* That is a limitation of the C runtime library available on this platform */ | |
vsprintf (buf, fmt, arglist); | |
for (len = 0; len < bufsize-1; len++) | |
if (buf[len] == 0) break; | |
#else | |
len = vsprintf (buf, fmt, arglist); | |
#endif /* HAS_vsprintf_void */ | |
#else /* NO_vsnprintf */ | |
#if defined(HAS_vsnprintf_void) | |
vsnprintf (buf, bufsize-1, fmt, arglist); | |
for (len = 0; len < bufsize-1; len++) | |
if (buf[len] == 0) break; | |
#else | |
len = vsnprintf (buf, bufsize-1, fmt, arglist); | |
#endif /* HAS_vsnprintf_void */ | |
#endif /* NO_vsnprintf */ | |
va_end (arglist); | |
/* If the formatted result didn't fit into the buffer, then grow the buffer and try again */ | |
if ((len < 0) || (len >= bufsize-1)) { | |
if (buf != stackbuf) | |
free (buf); | |
bufsize = bufsize * 2; | |
buf = (char *) malloc (bufsize); | |
if (buf == NULL) /* out of memory */ | |
return; | |
buf[bufsize-1] = '\0'; | |
continue; | |
} | |
break; | |
} | |
/* Output the formatted data expanding newlines where they exist */ | |
for (i = j = 0; i < len; ++i) { | |
if ('\n' == buf[i]) { | |
if (i >= j) { | |
if ((i != j) || (i == 0)) { | |
if (debug_unterm) | |
fprintf (sim_deb, "%.*s\r\n", i-j, &buf[j]); | |
else /* print prefix when required */ | |
fprintf (sim_deb, "%s%.*s\r\n", debug_prefix, i-j, &buf[j]); | |
} | |
debug_unterm = 0; | |
} | |
j = i + 1; | |
} | |
} | |
if (i > j) { | |
if (debug_unterm) | |
fprintf (sim_deb, "%.*s", i-j, &buf[j]); | |
else /* print prefix when required */ | |
fprintf (sim_deb, "%s%.*s", debug_prefix, i-j, &buf[j]); | |
} | |
/* Set unterminated flag for next time */ | |
debug_unterm = (len && (buf[len-1]=='\n')) ? 0 : 1; | |
if (buf != stackbuf) | |
free (buf); | |
} | |
return; | |
} |