blob: 368f9743cc6a31f4f33da478a4beae4d6085b72a [file] [log] [blame] [raw]
/* altairz80_dsk.c: MITS Altair 88-DISK Simulator
Copyright (c) 2002-2011, Peter Schorn
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
PETER SCHORN BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Peter Schorn shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Peter Schorn.
Based on work by Charles E Owen (c) 1997
The 88_DISK is a 8-inch floppy controller which can control up
to 16 daisy-chained Pertec FD-400 hard-sectored floppy drives.
Each diskette has physically 77 tracks of 32 137-byte sectors
each.
The controller is interfaced to the CPU by use of 3 I/O addresses,
standardly, these are device numbers 10, 11, and 12 (octal).
Address Mode Function
------- ---- --------
10 Out Selects and enables Controller and Drive
10 In Indicates status of Drive and Controller
11 Out Controls Disk Function
11 In Indicates current sector position of disk
12 Out Write data
12 In Read data
Drive Select Out (Device 10 OUT):
+---+---+---+---+---+---+---+---+
| C | X | X | X | Device |
+---+---+---+---+---+---+---+---+
C = If this bit is 1, the disk controller selected by 'device' is
cleared. If the bit is zero, 'device' is selected as the
device being controlled by subsequent I/O operations.
X = not used
Device = value zero thru 15, selects drive to be controlled.
Drive Status In (Device 10 IN):
+---+---+---+---+---+---+---+---+
| R | Z | I | X | X | H | M | W |
+---+---+---+---+---+---+---+---+
W - When 0, write circuit ready to write another byte.
M - When 0, head movement is allowed
H - When 0, indicates head is loaded for read/write
X - not used (will be 0)
I - When 0, indicates interrupts enabled (not used by this simulator)
Z - When 0, indicates head is on track 0
R - When 0, indicates that read circuit has new byte to read
Drive Control (Device 11 OUT):
+---+---+---+---+---+---+---+---+
| W | C | D | E | U | H | O | I |
+---+---+---+---+---+---+---+---+
I - When 1, steps head IN one track
O - When 1, steps head OUT one track
H - When 1, loads head to drive surface
U - When 1, unloads head
E - Enables interrupts (ignored by this simulator)
D - Disables interrupts (ignored by this simulator)
C - When 1 lowers head current (ignored by this simulator)
W - When 1, starts Write Enable sequence: W bit on device 10
(see above) will go 1 and data will be read from port 12
until 137 bytes have been read by the controller from
that port. The W bit will go off then, and the sector data
will be written to disk. Before you do this, you must have
stepped the track to the desired number, and waited until
the right sector number is presented on device 11 IN, then
set this bit.
Sector Position (Device 11 IN):
As the sectors pass by the read head, they are counted and the
number of the current one is available in this register.
+---+---+---+---+---+---+---+---+
| X | X | Sector Number | T |
+---+---+---+---+---+---+---+---+
X = Not used
Sector number = binary of the sector number currently under the
head, 0-31.
T = Sector True, is a 1 when the sector is positioned to read or
write.
*/
#include "altairz80_defs.h"
#include <assert.h>
/* Debug flags */
#define IN_MSG (1 << 0)
#define OUT_MSG (1 << 1)
#define READ_MSG (1 << 2)
#define WRITE_MSG (1 << 3)
#define SECTOR_STUCK_MSG (1 << 4)
#define TRACK_STUCK_MSG (1 << 5)
#define VERBOSE_MSG (1 << 6)
#define UNIT_V_DSK_WLK (UNIT_V_UF + 0) /* write locked */
#define UNIT_DSK_WLK (1 << UNIT_V_DSK_WLK)
#define DSK_SECTSIZE 137 /* size of sector */
#define DSK_SECT 32 /* sectors per track */
#define MAX_TRACKS 254 /* number of tracks,
original Altair has 77 tracks only */
#define DSK_TRACSIZE (DSK_SECTSIZE * DSK_SECT)
#define MAX_DSK_SIZE (DSK_TRACSIZE * MAX_TRACKS)
#define NUM_OF_DSK_MASK (NUM_OF_DSK - 1)
#define BOOTROM_SIZE_DSK 256 /* size of boot rom */
int32 dsk10(const int32 port, const int32 io, const int32 data);
int32 dsk11(const int32 port, const int32 io, const int32 data);
int32 dsk12(const int32 port, const int32 io, const int32 data);
static t_stat dsk_boot(int32 unitno, DEVICE *dptr);
static t_stat dsk_reset(DEVICE *dptr);
extern REG *sim_PC;
extern UNIT cpu_unit;
extern uint32 PCX;
extern t_stat install_bootrom(int32 bootrom[], int32 size, int32 addr, int32 makeROM);
extern uint32 sim_map_resource(uint32 baseaddr, uint32 size, uint32 resource_type,
int32 (*routine)(const int32, const int32, const int32), uint8 unmap);
void install_ALTAIRbootROM(void);
/* global data on status */
/* currently selected drive (values are 0 .. NUM_OF_DSK)
current_disk < NUM_OF_DSK implies that the corresponding disk is attached to a file */
static int32 current_disk = NUM_OF_DSK;
static int32 current_track [NUM_OF_DSK] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
static int32 current_sector [NUM_OF_DSK] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
static int32 current_byte [NUM_OF_DSK] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
static int32 current_flag [NUM_OF_DSK] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
static uint8 tracks [NUM_OF_DSK] = { MAX_TRACKS, MAX_TRACKS, MAX_TRACKS, MAX_TRACKS,
MAX_TRACKS, MAX_TRACKS, MAX_TRACKS, MAX_TRACKS,
MAX_TRACKS, MAX_TRACKS, MAX_TRACKS, MAX_TRACKS,
MAX_TRACKS, MAX_TRACKS, MAX_TRACKS, MAX_TRACKS };
static int32 in9_count = 0;
static int32 in9_message = FALSE;
static int32 dirty = FALSE; /* TRUE when buffer has unwritten data in it */
static int32 warnLevelDSK = 3;
static int32 warnLock [NUM_OF_DSK] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
static int32 warnAttached [NUM_OF_DSK] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
static int32 warnDSK10 = 0;
static int32 warnDSK11 = 0;
static int32 warnDSK12 = 0;
static int8 dskbuf[DSK_SECTSIZE]; /* data Buffer */
/* Altair MITS modified BOOT EPROM, fits in upper 256 byte of memory */
int32 bootrom_dsk[BOOTROM_SIZE_DSK] = {
0xf3, 0x06, 0x80, 0x3e, 0x0e, 0xd3, 0xfe, 0x05, /* ff00-ff07 */
0xc2, 0x05, 0xff, 0x3e, 0x16, 0xd3, 0xfe, 0x3e, /* ff08-ff0f */
0x12, 0xd3, 0xfe, 0xdb, 0xfe, 0xb7, 0xca, 0x20, /* ff10-ff17 */
0xff, 0x3e, 0x0c, 0xd3, 0xfe, 0xaf, 0xd3, 0xfe, /* ff18-ff1f */
0x21, 0x00, 0x5c, 0x11, 0x33, 0xff, 0x0e, 0x88, /* ff20-ff27 */
0x1a, 0x77, 0x13, 0x23, 0x0d, 0xc2, 0x28, 0xff, /* ff28-ff2f */
0xc3, 0x00, 0x5c, 0x31, 0x21, 0x5d, 0x3e, 0x00, /* ff30-ff37 */
0xd3, 0x08, 0x3e, 0x04, 0xd3, 0x09, 0xc3, 0x19, /* ff38-ff3f */
0x5c, 0xdb, 0x08, 0xe6, 0x02, 0xc2, 0x0e, 0x5c, /* ff40-ff47 */
0x3e, 0x02, 0xd3, 0x09, 0xdb, 0x08, 0xe6, 0x40, /* ff48-ff4f */
0xc2, 0x0e, 0x5c, 0x11, 0x00, 0x00, 0x06, 0x08, /* ff50-ff57 */
0xc5, 0xd5, 0x11, 0x86, 0x80, 0x21, 0x88, 0x5c, /* ff58-ff5f */
0xdb, 0x09, 0x1f, 0xda, 0x2d, 0x5c, 0xe6, 0x1f, /* ff60-ff67 */
0xb8, 0xc2, 0x2d, 0x5c, 0xdb, 0x08, 0xb7, 0xfa, /* ff68-ff6f */
0x39, 0x5c, 0xdb, 0x0a, 0x77, 0x23, 0x1d, 0xc2, /* ff70-ff77 */
0x39, 0x5c, 0xd1, 0x21, 0x8b, 0x5c, 0x06, 0x80, /* ff78-ff7f */
0x7e, 0x12, 0x23, 0x13, 0x05, 0xc2, 0x4d, 0x5c, /* ff80-ff87 */
0xc1, 0x21, 0x00, 0x5c, 0x7a, 0xbc, 0xc2, 0x60, /* ff88-ff8f */
0x5c, 0x7b, 0xbd, 0xd2, 0x80, 0x5c, 0x04, 0x04, /* ff90-ff97 */
0x78, 0xfe, 0x20, 0xda, 0x25, 0x5c, 0x06, 0x01, /* ff98-ff9f */
0xca, 0x25, 0x5c, 0xdb, 0x08, 0xe6, 0x02, 0xc2, /* ffa0-ffa7 */
0x70, 0x5c, 0x3e, 0x01, 0xd3, 0x09, 0x06, 0x00, /* ffa8-ffaf */
0xc3, 0x25, 0x5c, 0x3e, 0x80, 0xd3, 0x08, 0xfb, /* ffb0-ffb7 */
0xc3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ffb8-ffbf */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ffc0-ffc7 */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ffc8-ffcf */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ffd0-ffd7 */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ffd8-ffdf */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ffe0-ffe7 */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ffe8-ffef */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* fff0-fff7 */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* fff8-ffff */
};
/* 88DSK Standard I/O Data Structures */
static UNIT dsk_unit[] = {
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
{ UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
};
static REG dsk_reg[] = {
{ DRDATA (DISK, current_disk, 4) },
{ BRDATA (CURTRACK, current_track, 10, 32, NUM_OF_DSK), REG_CIRC + REG_RO },
{ BRDATA (CURSECTOR, current_sector, 10, 32, NUM_OF_DSK), REG_CIRC + REG_RO },
{ BRDATA (CURBYTE, current_byte, 10, 32, NUM_OF_DSK), REG_CIRC + REG_RO },
{ BRDATA (CURFLAG, current_flag, 10, 32, NUM_OF_DSK), REG_CIRC + REG_RO },
{ BRDATA (TRACKS, tracks, 10, 8, NUM_OF_DSK), REG_CIRC },
{ DRDATA (IN9COUNT, in9_count, 4), REG_RO },
{ DRDATA (IN9MESSAGE, in9_message, 4), REG_RO },
{ DRDATA (DIRTY, dirty, 4), REG_RO },
{ DRDATA (DSKWL, warnLevelDSK, 32) },
{ BRDATA (WARNLOCK, warnLock, 10, 32, NUM_OF_DSK), REG_CIRC + REG_RO },
{ BRDATA (WARNATTACHED, warnAttached, 10, 32, NUM_OF_DSK), REG_CIRC + REG_RO },
{ DRDATA (WARNDSK10, warnDSK10, 4), REG_RO },
{ DRDATA (WARNDSK11, warnDSK11, 4), REG_RO },
{ DRDATA (WARNDSK12, warnDSK12, 4), REG_RO },
{ BRDATA (DISKBUFFER, dskbuf, 10, 8, DSK_SECTSIZE), REG_CIRC + REG_RO },
{ NULL }
};
static MTAB dsk_mod[] = {
{ UNIT_DSK_WLK, 0, "WRTENB", "WRTENB", NULL },
{ UNIT_DSK_WLK, UNIT_DSK_WLK, "WRTLCK", "WRTLCK", NULL },
{ 0 }
};
/* Debug Flags */
static DEBTAB dsk_dt[] = {
{ "IN", IN_MSG },
{ "OUT", OUT_MSG },
{ "READ", READ_MSG },
{ "WRITE", WRITE_MSG },
{ "SECTOR_STUCK", SECTOR_STUCK_MSG },
{ "TRACK_STUCK", TRACK_STUCK_MSG },
{ "VERBOSE", VERBOSE_MSG },
{ NULL, 0 }
};
DEVICE dsk_dev = {
"DSK", dsk_unit, dsk_reg, dsk_mod,
NUM_OF_DSK, 10, 31, 1, 8, 8,
NULL, NULL, &dsk_reset,
&dsk_boot, NULL, NULL,
NULL, (DEV_DISABLE | DEV_DEBUG), 0,
dsk_dt, NULL, "Altair Floppy Disk DSK"
};
static char* selectInOut(const int32 io) {
return io == 0 ? "IN" : "OUT";
}
/* service routines to handle simulator functions */
/* reset routine */
static t_stat dsk_reset(DEVICE *dptr) {
int32 i;
for (i = 0; i < NUM_OF_DSK; i++) {
warnLock[i] = 0;
warnAttached[i] = 0;
current_track[i] = 0;
current_sector[i] = 0;
current_byte[i] = 0;
current_flag[i] = 0;
tracks[i] = MAX_TRACKS;
}
warnDSK10 = 0;
warnDSK11 = 0;
warnDSK12 = 0;
current_disk = NUM_OF_DSK;
in9_count = 0;
in9_message = FALSE;
sim_map_resource(0x08, 1, RESOURCE_TYPE_IO, &dsk10, dptr->flags & DEV_DIS);
sim_map_resource(0x09, 1, RESOURCE_TYPE_IO, &dsk11, dptr->flags & DEV_DIS);
sim_map_resource(0x0A, 1, RESOURCE_TYPE_IO, &dsk12, dptr->flags & DEV_DIS);
return SCPE_OK;
}
void install_ALTAIRbootROM(void) {
assert(install_bootrom(bootrom_dsk, BOOTROM_SIZE_DSK, ALTAIR_ROM_LOW, TRUE) == SCPE_OK);
}
/* The boot routine modifies the boot ROM in such a way that subsequently
the specified disk is used for boot purposes.
*/
static t_stat dsk_boot(int32 unitno, DEVICE *dptr) {
if (cpu_unit.flags & (UNIT_CPU_ALTAIRROM | UNIT_CPU_BANKED)) {
/* check whether we are really modifying an LD A,<> instruction */
if ((bootrom_dsk[UNIT_NO_OFFSET_1 - 1] == LDA_INSTRUCTION) && (bootrom_dsk[UNIT_NO_OFFSET_2 - 1] == LDA_INSTRUCTION)) {
bootrom_dsk[UNIT_NO_OFFSET_1] = unitno & 0xff; /* LD A,<unitno> */
bootrom_dsk[UNIT_NO_OFFSET_2] = 0x80 | (unitno & 0xff); /* LD a,80h | <unitno> */
}
else { /* Attempt to modify non LD A,<> instructions is refused. */
printf("Incorrect boot ROM offsets detected.\n");
return SCPE_IERR;
}
install_ALTAIRbootROM(); /* install modified ROM */
}
*((int32 *) sim_PC->loc) = ALTAIR_ROM_LOW;
return SCPE_OK;
}
static int32 dskseek(const UNIT *xptr) {
return sim_fseek(xptr -> fileref, DSK_TRACSIZE * current_track[current_disk] +
DSK_SECTSIZE * current_sector[current_disk], SEEK_SET);
}
/* precondition: current_disk < NUM_OF_DSK */
static void writebuf(void) {
int32 i, rtn;
UNIT *uptr;
i = current_byte[current_disk]; /* null-fill rest of sector if any */
while (i < DSK_SECTSIZE)
dskbuf[i++] = 0;
uptr = dsk_dev.units + current_disk;
if (((uptr -> flags) & UNIT_DSK_WLK) == 0) { /* write enabled */
sim_debug(WRITE_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT " OUT 0x0a (WRITE) D%d T%d S%d\n",
current_disk, PCX, current_disk,
current_track[current_disk], current_sector[current_disk]);
if (dskseek(uptr)) {
sim_debug(VERBOSE_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT " fseek failed D%d T%d S%d\n",
current_disk, PCX, current_disk,
current_track[current_disk], current_sector[current_disk]);
}
rtn = sim_fwrite(dskbuf, 1, DSK_SECTSIZE, uptr -> fileref);
if (rtn != DSK_SECTSIZE) {
sim_debug(VERBOSE_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT " sim_fwrite failed T%d S%d Return=%d\n",
current_disk, PCX, current_track[current_disk],
current_sector[current_disk], rtn);
}
}
else if ( (dsk_dev.dctrl & VERBOSE_MSG) && (warnLock[current_disk] < warnLevelDSK) ) {
/* write locked - print warning message if required */
warnLock[current_disk]++;
sim_debug(VERBOSE_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT " Attempt to write to locked DSK%d - ignored.\n",
current_disk, PCX, current_disk);
}
current_flag[current_disk] &= 0xfe; /* ENWD off */
current_byte[current_disk] = 0xff;
dirty = FALSE;
}
/* I/O instruction handlers, called from the CPU module when an
IN or OUT instruction is issued.
Each function is passed an 'io' flag, where 0 means a read from
the port, and 1 means a write to the port. On input, the actual
input is passed as the return value, on output, 'data' is written
to the device.
*/
/* Disk Controller Status/Select */
/* IMPORTANT: The status flags read by port 8 IN instruction are
INVERTED, that is, 0 is true and 1 is false. To handle this, the
simulator keeps it's own status flags as 0=false, 1=true; and
returns the COMPLEMENT of the status flags when read. This makes
setting/testing of the flag bits more logical, yet meets the
simulation requirement that they are reversed in hardware.
*/
int32 dsk10(const int32 port, const int32 io, const int32 data) {
int32 current_disk_flags;
in9_count = 0;
if (io == 0) { /* IN: return flags */
if (current_disk >= NUM_OF_DSK) {
if ((dsk_dev.dctrl & VERBOSE_MSG) && (warnDSK10 < warnLevelDSK)) {
warnDSK10++;
sim_debug(VERBOSE_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT
" Attempt of IN 0x08 on unattached disk - ignored.\n",
current_disk, PCX);
}
return 0xff; /* no drive selected - can do nothing */
}
return (~current_flag[current_disk]) & 0xff; /* return the COMPLEMENT! */
}
/* OUT: Controller set/reset/enable/disable */
if (dirty) /* implies that current_disk < NUM_OF_DSK */
writebuf();
sim_debug(OUT_MSG, &dsk_dev, "DSK%i: " ADDRESS_FORMAT " OUT 0x08: %x\n", current_disk, PCX, data);
current_disk = data & NUM_OF_DSK_MASK; /* 0 <= current_disk < NUM_OF_DSK */
current_disk_flags = (dsk_dev.units + current_disk) -> flags;
if ((current_disk_flags & UNIT_ATT) == 0) { /* nothing attached? */
if ( (dsk_dev.dctrl & VERBOSE_MSG) && (warnAttached[current_disk] < warnLevelDSK) ) {
warnAttached[current_disk]++;
sim_debug(VERBOSE_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT
" Attempt to select unattached DSK%d - ignored.\n",
current_disk, PCX, current_disk);
}
current_disk = NUM_OF_DSK;
}
else {
current_sector[current_disk] = 0xff; /* reset internal counters */
current_byte[current_disk] = 0xff;
current_flag[current_disk] = data & 0x80 ? 0 /* disable drive */ :
(current_track[current_disk] == 0 ? 0x5a /* enable: head move true, track 0 if there */ :
0x1a); /* enable: head move true */
}
return 0; /* ignored since OUT */
}
/* Disk Drive Status/Functions */
int32 dsk11(const int32 port, const int32 io, const int32 data) {
if (current_disk >= NUM_OF_DSK) {
if ((dsk_dev.dctrl & VERBOSE_MSG) && (warnDSK11 < warnLevelDSK)) {
warnDSK11++;
sim_debug(VERBOSE_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT
" Attempt of %s 0x09 on unattached disk - ignored.\n",
current_disk, PCX, selectInOut(io));
}
return 0; /* no drive selected - can do nothing */
}
/* now current_disk < NUM_OF_DSK */
if (io == 0) { /* read sector position */
in9_count++;
if ((dsk_dev.dctrl & SECTOR_STUCK_MSG) && (in9_count > 2 * DSK_SECT) && (!in9_message)) {
in9_message = TRUE;
sim_debug(SECTOR_STUCK_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT " Looping on sector find.\n",
current_disk, PCX);
}
sim_debug(IN_MSG, &dsk_dev, "DSK%i: " ADDRESS_FORMAT " IN 0x09\n", current_disk, PCX);
if (dirty) /* implies that current_disk < NUM_OF_DSK */
writebuf();
if (current_flag[current_disk] & 0x04) { /* head loaded? */
current_sector[current_disk]++;
if (current_sector[current_disk] >= DSK_SECT)
current_sector[current_disk] = 0;
current_byte[current_disk] = 0xff;
return (((current_sector[current_disk] << 1) & 0x3e) /* return 'sector true' bit = 0 (true) */
| 0xc0); /* set on 'unused' bits */
} else
return 0; /* head not loaded - return 0 */
}
in9_count = 0;
/* drive functions */
sim_debug(OUT_MSG, &dsk_dev, "DSK%i: " ADDRESS_FORMAT " OUT 0x09: %x\n", current_disk, PCX, data);
if (data & 0x01) { /* step head in */
if (current_track[current_disk] == (tracks[current_disk] - 1)) {
sim_debug(TRACK_STUCK_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT " Unnecessary step in.\n",
current_disk, PCX);
}
current_track[current_disk]++;
if (current_track[current_disk] > (tracks[current_disk] - 1))
current_track[current_disk] = (tracks[current_disk] - 1);
if (dirty) /* implies that current_disk < NUM_OF_DSK */
writebuf();
current_sector[current_disk] = 0xff;
current_byte[current_disk] = 0xff;
}
if (data & 0x02) { /* step head out */
if (current_track[current_disk] == 0) {
sim_debug(TRACK_STUCK_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT " Unnecessary step out.\n",
current_disk, PCX);
}
current_track[current_disk]--;
if (current_track[current_disk] < 0) {
current_track[current_disk] = 0;
current_flag[current_disk] |= 0x40; /* track 0 if there */
}
if (dirty) /* implies that current_disk < NUM_OF_DSK */
writebuf();
current_sector[current_disk] = 0xff;
current_byte[current_disk] = 0xff;
}
if (dirty) /* implies that current_disk < NUM_OF_DSK */
writebuf();
if (data & 0x04) { /* head load */
current_flag[current_disk] |= 0x04; /* turn on head loaded bit */
current_flag[current_disk] |= 0x80; /* turn on 'read data available' */
}
if (data & 0x08) { /* head unload */
current_flag[current_disk] &= 0xfb; /* turn off 'head loaded' bit */
current_flag[current_disk] &= 0x7f; /* turn off 'read data available' */
current_sector[current_disk] = 0xff;
current_byte[current_disk] = 0xff;
}
/* interrupts & head current are ignored */
if (data & 0x80) { /* write sequence start */
current_byte[current_disk] = 0;
current_flag[current_disk] |= 0x01; /* enter new write data on */
}
return 0; /* ignored since OUT */
}
/* Disk Data In/Out */
int32 dsk12(const int32 port, const int32 io, const int32 data) {
int32 i, rtn;
UNIT *uptr;
if (current_disk >= NUM_OF_DSK) {
if ((dsk_dev.dctrl & VERBOSE_MSG) && (warnDSK12 < warnLevelDSK)) {
warnDSK12++;
sim_debug(VERBOSE_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT
" Attempt of %s 0x0a on unattached disk - ignored.\n",
current_disk, PCX, selectInOut(io));
}
return 0;
}
/* now current_disk < NUM_OF_DSK */
in9_count = 0;
uptr = dsk_dev.units + current_disk;
if (io == 0) {
if (current_byte[current_disk] >= DSK_SECTSIZE) {
/* physically read the sector */
sim_debug(READ_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT " IN 0x0a (READ) D%d T%d S%d\n",
current_disk, PCX, current_disk,
current_track[current_disk], current_sector[current_disk]);
for (i = 0; i < DSK_SECTSIZE; i++)
dskbuf[i] = 0;
if (dskseek(uptr)) {
if ((dsk_dev.dctrl & VERBOSE_MSG) && (warnDSK12 < warnLevelDSK)) {
warnDSK12++;
sim_debug(VERBOSE_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT " fseek error D%d T%d S%d\n",
current_disk, PCX, current_disk,
current_track[current_disk], current_sector[current_disk]);
}
}
rtn = sim_fread(dskbuf, 1, DSK_SECTSIZE, uptr -> fileref);
if (rtn != DSK_SECTSIZE) {
if ((dsk_dev.dctrl & VERBOSE_MSG) && (warnDSK12 < warnLevelDSK)) {
warnDSK12++;
sim_debug(VERBOSE_MSG, &dsk_dev,
"DSK%i: " ADDRESS_FORMAT " sim_fread error D%d T%d S%d\n",
current_disk, PCX, current_disk,
current_track[current_disk], current_sector[current_disk]);
}
}
current_byte[current_disk] = 0;
}
return dskbuf[current_byte[current_disk]++] & 0xff;
}
else {
if (current_byte[current_disk] >= DSK_SECTSIZE)
writebuf(); /* from above we have that current_disk < NUM_OF_DSK */
else {
dirty = TRUE; /* this guarantees for the next call to writebuf that current_disk < NUM_OF_DSK */
dskbuf[current_byte[current_disk]++] = data & 0xff;
}
return 0; /* ignored since OUT */
}
}