| /* 3b2_iu.c: SCN2681A Dual UART Implementation | |
| Copyright (c) 2017, Seth J. Morabito | |
| Permission is hereby granted, free of charge, to any person | |
| obtaining a copy of this software and associated documentation | |
| files (the "Software"), to deal in the Software without | |
| restriction, including without limitation the rights to use, copy, | |
| modify, merge, publish, distribute, sublicense, and/or sell copies | |
| of the Software, and to permit persons to whom the Software is | |
| furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be | |
| included in all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
| EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | |
| MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
| NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS | |
| BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN | |
| ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | |
| SOFTWARE. | |
| Except as contained in this notice, the name of the author shall | |
| not be used in advertising or otherwise to promote the sale, use or | |
| other dealings in this Software without prior written authorization | |
| from the author. | |
| */ | |
| #include "3b2_iu.h" | |
| #include "sim_tmxr.h" | |
| /* | |
| * The 3B2/400 has two on-board serial ports, labeled CONSOLE and | |
| * CONTTY. The CONSOLE port is (naturally) the system console. The | |
| * CONTTY port serves as a secondary serial port for an additional | |
| * terminal. | |
| * | |
| * These lines are driven by an SCN2681A Dual UART, with two receivers | |
| * and two transmitters. | |
| * | |
| * In addition to the two TX/RX ports, the SCN27681A also has one | |
| * programmable timer. | |
| * | |
| * The SCN2681A UART is represented here by four devices: | |
| * | |
| * - Console TTI (Input, port A) | |
| * - Console TTO (Output, port A) | |
| * - Contty (I/O, port B. Terminal multiplexer with one line) | |
| * - IU Timer | |
| */ | |
| /* | |
| * Registers | |
| */ | |
| /* The IU state shared between A and B */ | |
| IU_STATE iu_state; | |
| /* The tx/rx state for ports A and B */ | |
| IU_PORT iu_console; | |
| IU_PORT iu_contty; | |
| /* The timer state */ | |
| IU_TIMER_STATE iu_timer_state; | |
| /* Flags for incrementing mode pointers */ | |
| t_bool iu_increment_a = FALSE; | |
| t_bool iu_increment_b = FALSE; | |
| extern uint16 csr_data; | |
| BITFIELD sr_bits[] = { | |
| BIT(RXRDY), | |
| BIT(FFULL), | |
| BIT(TXRDY), | |
| BIT(TXEMT), | |
| BIT(OVRN_E), | |
| BIT(PRTY_E), | |
| BIT(FRM_E), | |
| BIT(BRK), | |
| ENDBITS | |
| }; | |
| BITFIELD isr_bits[] = { | |
| BIT(TXRDYA), | |
| BIT(RXRDY_FFA), | |
| BIT(DLTA_BRKA), | |
| BIT(CTR_RDY), | |
| BIT(TXRDYB), | |
| BIT(RXRDY_FFB), | |
| BIT(DLTA_BRKB), | |
| BIT(IPC), | |
| ENDBITS | |
| }; | |
| BITFIELD acr_bits[] = { | |
| BIT(BRG_SET), | |
| BITFFMT(TMR_MODE,3,%d), | |
| BIT(DLTA_IP3), | |
| BIT(DLTA_IP2), | |
| BIT(DLTA_IP1), | |
| BIT(DLTA_IP0), | |
| ENDBITS | |
| }; | |
| BITFIELD conf_bits[] = { | |
| BIT(TX_EN), | |
| BIT(RX_EN), | |
| ENDBITS | |
| }; | |
| /* TTI (Console) data structures */ | |
| REG tti_reg[] = { | |
| { HRDATADF(STAT, iu_console.stat, 8, "Status", sr_bits) }, | |
| { HRDATADF(CONF, iu_console.conf, 8, "Config", conf_bits) }, | |
| { BRDATAD(DATA, iu_console.rxbuf, 16, 8, IU_BUF_SIZE, "Data") }, | |
| { NULL } | |
| }; | |
| UNIT tti_unit = { UDATA(&iu_svc_tti, UNIT_IDLE, 0), TMLN_SPD_9600_BPS }; | |
| DEVICE tti_dev = { | |
| "TTI", &tti_unit, tti_reg, NULL, | |
| 1, 8, 32, 1, 8, 8, | |
| NULL, NULL, &tti_reset, | |
| NULL, NULL, NULL, NULL, | |
| DEV_DEBUG, 0, sys_deb_tab | |
| }; | |
| /* TTO (Console) data structures */ | |
| REG tto_reg[] = { | |
| { HRDATADF(STAT, iu_console.stat, 8, "Status", sr_bits) }, | |
| { HRDATADF(ISTAT, iu_state.istat, 8, "Interrupt Status", isr_bits) }, | |
| { HRDATAD(IMR, iu_state.imr, 8, "Interrupt Mask") }, | |
| { HRDATADF(ACR, iu_state.acr, 8, "Auxiliary Control Register", acr_bits) }, | |
| { HRDATAD(DATA, iu_console.txbuf, 8, "Data") }, | |
| { NULL } | |
| }; | |
| UNIT tto_unit = { UDATA(&iu_svc_tto, TT_MODE_8B, 0), SERIAL_OUT_WAIT }; | |
| DEVICE tto_dev = { | |
| "TTO", &tto_unit, tto_reg, NULL, | |
| 1, 8, 32, 1, 8, 8, | |
| NULL, NULL, NULL, | |
| NULL, NULL, NULL, NULL, | |
| DEV_DEBUG, 0, sys_deb_tab | |
| }; | |
| /* CONTTY data structures */ | |
| /* | |
| * The CONTTY "multiplexer" is a bit unusual in that it serves only a | |
| * single line, representing the built-in CONTTY port. On a real | |
| * 3B2/400, the system board's dual UART serves both CONSOLE and | |
| * CONTTY lines, giving support for two terminals. In the simulator, | |
| * the CONSOLE is served by TTI and TTO devices, whereas the CONTTY is | |
| * served by a TMXR multiplexer. | |
| */ | |
| TMLN *contty_ldsc = NULL; | |
| TMXR contty_desc = { 1, 0, 0, NULL }; | |
| REG contty_reg[] = { | |
| { HRDATADF(STAT, iu_contty.stat, 8, "Status", sr_bits) }, | |
| { HRDATADF(CONF, iu_contty.conf, 8, "Config", conf_bits) }, | |
| { BRDATAD(RXDATA, iu_contty.rxbuf, 16, 8, IU_BUF_SIZE, "RX Data") }, | |
| { HRDATAD(TXDATA, iu_contty.txbuf, 8, "TX Data") }, | |
| { HRDATADF(ISTAT, iu_state.istat, 8, "Interrupt Status", isr_bits) }, | |
| { HRDATAD(IMR, iu_state.imr, 8, "Interrupt Mask") }, | |
| { HRDATADF(ACR, iu_state.acr, 8, "Auxiliary Control Register", acr_bits) }, | |
| { NULL } | |
| }; | |
| char *brg_rates[IU_SPEED_REGS][IU_SPEEDS] = { | |
| {NULL, "110", NULL, NULL, | |
| "300", NULL, NULL, "1200", | |
| "2400", "4800", NULL, "9600", | |
| "38400", NULL, NULL, NULL}, | |
| {NULL, "110", NULL, NULL, | |
| "300", NULL, "1200", NULL, | |
| NULL, "2400", "4800", "9600", | |
| "19200", NULL, NULL, NULL} | |
| }; | |
| char *parity[3] = {"O", "E", "N"}; | |
| UNIT contty_unit[2] = { | |
| { UDATA(&iu_svc_contty_rcv, UNIT_ATTABLE, 0) }, | |
| { UDATA(&iu_svc_contty_xmt, TT_MODE_8B, 0), SERIAL_OUT_WAIT } | |
| }; | |
| UNIT *contty_rcv_unit = &contty_unit[0]; | |
| UNIT *contty_xmt_unit = &contty_unit[1]; | |
| DEBTAB contty_deb_tab[] = { | |
| {"EXEC", EXECUTE_MSG, "Execute"}, | |
| {"XMT", TMXR_DBG_XMT, "Transmitted Data"}, | |
| {"RCV", TMXR_DBG_RCV, "Received Data"}, | |
| {"MDM", TMXR_DBG_MDM, "Modem Signals"}, | |
| {"CON", TMXR_DBG_CON, "connection activities"}, | |
| {"TRC", TMXR_DBG_TRC, "trace routine calls"}, | |
| {"ASY", TMXR_DBG_ASY, "Asynchronous Activities"}, | |
| {0} | |
| }; | |
| DEVICE contty_dev = { | |
| "CONTTY", contty_unit, contty_reg, NULL, | |
| 1, 8, 32, 1, 8, 8, | |
| &tmxr_ex, &tmxr_dep, &contty_reset, | |
| NULL, &contty_attach, &contty_detach, | |
| NULL, DEV_DISABLE|DEV_DEBUG|DEV_MUX, | |
| 0, contty_deb_tab, NULL, NULL, | |
| NULL, NULL, | |
| (void *)&contty_desc, | |
| NULL | |
| }; | |
| /* IU Timer data structures */ | |
| REG iu_timer_reg[] = { | |
| { HRDATAD(CTR_SET, iu_timer_state.c_set, 16, "Counter Setting") }, | |
| { NULL } | |
| }; | |
| UNIT iu_timer_unit = { UDATA(&iu_svc_timer, 0, 0) }; | |
| DEVICE iu_timer_dev = { | |
| "IUTIMER", &iu_timer_unit, iu_timer_reg, NULL, | |
| 1, 8, 32, 1, 8, 8, | |
| NULL, NULL, &iu_timer_reset, | |
| NULL, NULL, NULL, NULL, | |
| DEV_DEBUG, 0, sys_deb_tab | |
| }; | |
| uint8 brg_reg = 0; /* Selected baud-rate generator register */ | |
| uint8 brg_clk = 11; /* Selected baud-rate generator clock */ | |
| uint8 parity_sel = 1; /* Selected parity */ | |
| uint8 bits_per_char = 7; | |
| t_stat contty_attach(UNIT *uptr, CONST char *cptr) | |
| { | |
| t_stat r; | |
| TMLN *lp; | |
| tmxr_set_modem_control_passthru(&contty_desc); | |
| r = tmxr_attach(&contty_desc, uptr, cptr); | |
| if (r != SCPE_OK) { | |
| tmxr_clear_modem_control_passthru(&contty_desc); | |
| return r; | |
| } | |
| lp = &contty_ldsc[0]; | |
| tmxr_set_get_modem_bits(lp, TMXR_MDM_DTR|TMXR_MDM_RTS, 0, NULL); | |
| return SCPE_OK; | |
| } | |
| t_stat contty_detach(UNIT *uptr) | |
| { | |
| t_stat r = tmxr_detach(&contty_desc, uptr); | |
| tmxr_clear_modem_control_passthru(&contty_desc); | |
| return r; | |
| } | |
| void increment_modep_a() | |
| { | |
| iu_increment_a = FALSE; | |
| iu_console.modep++; | |
| if (iu_console.modep > 1) { | |
| iu_console.modep = 0; | |
| } | |
| } | |
| void increment_modep_b() | |
| { | |
| iu_increment_b = FALSE; | |
| iu_contty.modep++; | |
| if (iu_contty.modep > 1) { | |
| iu_contty.modep = 0; | |
| } | |
| } | |
| void iu_txrdy_a_irq() { | |
| if ((iu_state.imr & IMR_TXRA) && | |
| (iu_console.conf & TX_EN) && | |
| (iu_console.stat & STS_TXR)) { | |
| sim_debug(EXECUTE_MSG, &tto_dev, | |
| "[iu_txrdy_a_irq()] Firing IRQ after transmit of %02x (%c)\n", | |
| (uint8) iu_console.txbuf, (char) iu_console.txbuf); | |
| csr_data |= CSRUART; | |
| } | |
| } | |
| void iu_txrdy_b_irq() { | |
| if ((iu_state.imr & IMR_TXRB) && | |
| (iu_contty.conf & TX_EN) && | |
| (iu_contty.stat & STS_TXR)) { | |
| sim_debug(EXECUTE_MSG, &contty_dev, | |
| "[iu_txrdy_b_irq()] Firing IRQ after transmit of %02x (%c)\n", | |
| (uint8) iu_contty.txbuf, (char) iu_contty.txbuf); | |
| csr_data |= CSRUART; | |
| } | |
| } | |
| t_stat tti_reset(DEVICE *dptr) | |
| { | |
| memset(&iu_state, 0, sizeof(IU_STATE)); | |
| memset(&iu_console, 0, sizeof(IU_PORT)); | |
| /* Input Port logic is inverted - 0 means set */ | |
| iu_state.inprt = ~(IU_DCDA); | |
| /* Start the Console TTI polling loop */ | |
| if (!sim_is_active(&tti_unit)) { | |
| sim_activate_after(&tti_unit, tti_unit.wait); | |
| } | |
| return SCPE_OK; | |
| } | |
| t_stat contty_reset(DEVICE *dtpr) | |
| { | |
| char line_config[16]; | |
| if (contty_ldsc == NULL) { | |
| contty_desc.ldsc = | |
| contty_ldsc = | |
| (TMLN *)calloc(1, sizeof(*contty_ldsc)); | |
| } | |
| tmxr_set_port_speed_control(&contty_desc); | |
| tmxr_set_line_unit(&contty_desc, 0, contty_rcv_unit); | |
| tmxr_set_line_output_unit(&contty_desc, 0, contty_xmt_unit); | |
| tmxr_set_console_units(&tti_unit, &tto_unit); | |
| memset(&iu_state, 0, sizeof(IU_STATE)); | |
| memset(&iu_contty, 0, sizeof(IU_PORT)); | |
| /* DCD is off (inverted logic, 1 means off) */ | |
| iu_state.inprt |= IU_DCDB; | |
| brg_reg = 0; | |
| brg_clk = BRG_DEFAULT; | |
| parity_sel = IU_PARITY_EVEN; | |
| bits_per_char = 7; | |
| sprintf(line_config, "%s-%d%s1", | |
| brg_rates[brg_reg][brg_clk], | |
| bits_per_char, | |
| parity[parity_sel]); | |
| tmxr_set_config_line(&contty_ldsc[0], line_config); | |
| /* Start the CONTTY polling loop */ | |
| if (!sim_is_active(contty_rcv_unit)) { | |
| sim_activate_after(contty_rcv_unit, contty_rcv_unit->wait); | |
| } | |
| return SCPE_OK; | |
| } | |
| t_stat iu_timer_reset(DEVICE *dptr) | |
| { | |
| memset(&iu_timer_state, 0, sizeof(IU_TIMER_STATE)); | |
| return SCPE_OK; | |
| } | |
| /* Service routines */ | |
| t_stat iu_svc_tti(UNIT *uptr) | |
| { | |
| int32 temp; | |
| sim_clock_coschedule(uptr, tmxr_poll); | |
| /* TODO: | |
| - If there has been a change on IP0-IP3, set the corresponding | |
| bits in IPCR, if configured to do so. We'll need to figure out | |
| how these are wired (DCD pin, etc?) | |
| - Update the Output Port pins (which are logically inverted) | |
| based on the contents of the OPR, OPCR, MR, and CR registers. | |
| */ | |
| if ((temp = sim_poll_kbd()) < SCPE_KFLAG) { | |
| return temp; | |
| } | |
| if (iu_console.conf & RX_EN) { | |
| if ((iu_console.stat & STS_FFL) == 0) { | |
| iu_console.rxbuf[iu_console.w_p] = (temp & 0xff); | |
| iu_console.w_p = (iu_console.w_p + 1) % IU_BUF_SIZE; | |
| if (iu_console.w_p == iu_contty.w_p) { | |
| iu_console.stat |= STS_FFL; | |
| } | |
| } | |
| iu_console.stat |= STS_RXR; | |
| iu_state.istat |= ISTS_RAI; | |
| if (iu_state.imr & IMR_RXRA) { | |
| csr_data |= CSRUART; | |
| } | |
| } | |
| return SCPE_OK; | |
| } | |
| t_stat iu_svc_tto(UNIT *uptr) | |
| { | |
| /* If there's more DMA to do, do it */ | |
| if (iu_console.dma && ((dma_state.mask >> DMA_IUA_CHAN) & 0x1) == 0) { | |
| iu_dma(DMA_IUA_CHAN, IUBASE+IUA_DATA_REG); | |
| } else { | |
| /* The buffer is now empty, we've transmitted, so set TXR */ | |
| iu_console.stat |= STS_TXR; | |
| iu_state.istat |= 1; | |
| iu_txrdy_a_irq(); | |
| } | |
| return SCPE_OK; | |
| } | |
| t_stat iu_svc_contty_rcv(UNIT *uptr) | |
| { | |
| int32 temp, ln; | |
| if ((uptr->flags & UNIT_ATT) == 0) { | |
| return SCPE_OK; | |
| } | |
| /* Check for connect */ | |
| if ((ln = tmxr_poll_conn(&contty_desc)) >= 0) { | |
| contty_ldsc[ln].rcve = 1; | |
| iu_state.inprt &= ~(IU_DCDB); | |
| iu_state.ipcr |= IU_DCDB; | |
| csr_data |= CSRUART; | |
| } | |
| /* Check for disconnect */ | |
| if (!contty_ldsc[0].conn && (iu_state.inprt & IU_DCDB) == 0) { | |
| contty_ldsc[0].rcve = 0; | |
| iu_state.inprt |= IU_DCDB; | |
| iu_state.ipcr |= IU_DCDB; | |
| csr_data |= CSRUART; | |
| } else if (iu_contty.conf & RX_EN) { | |
| tmxr_poll_rx(&contty_desc); | |
| if (contty_ldsc[0].conn) { | |
| temp = tmxr_getc_ln(&contty_ldsc[0]); | |
| if (temp && !(temp & SCPE_BREAK)) { | |
| if ((iu_contty.stat & STS_FFL) == 0) { | |
| iu_contty.rxbuf[iu_contty.w_p] = (temp & 0xff); | |
| iu_contty.w_p = (iu_contty.w_p + 1) % IU_BUF_SIZE; | |
| if (iu_contty.w_p == iu_contty.r_p) { | |
| iu_contty.stat |= STS_FFL; | |
| } | |
| } | |
| iu_contty.stat |= STS_RXR; | |
| iu_state.istat |= ISTS_RBI; | |
| if (iu_state.imr & IMR_RXRB) { | |
| csr_data |= CSRUART; | |
| } | |
| } | |
| } | |
| } | |
| tmxr_clock_coschedule(uptr, tmxr_poll); | |
| return SCPE_OK; | |
| } | |
| t_stat iu_svc_contty_xmt(UNIT *uptr) | |
| { | |
| dma_channel *chan = &dma_state.channels[DMA_IUB_CHAN]; | |
| tmxr_poll_tx(&contty_desc); | |
| if (chan->wcount_c >= 0) { | |
| /* More DMA to do */ | |
| iu_dma(DMA_IUB_CHAN, IUBASE+IUB_DATA_REG); | |
| } else { | |
| /* The buffer is now empty, we've transmitted, so set TXR */ | |
| iu_contty.stat |= STS_TXR; | |
| iu_state.istat |= 0x10; | |
| iu_txrdy_b_irq(); | |
| } | |
| return SCPE_OK; | |
| } | |
| t_stat iu_svc_timer(UNIT *uptr) | |
| { | |
| iu_state.istat |= ISTS_CRI; | |
| if (iu_state.imr & IMR_CTR) { | |
| csr_data |= CSRUART; | |
| } | |
| return SCPE_OK; | |
| } | |
| /* | |
| * Reg | Name (Read) | Name (Write) | |
| * -----+-------------------------+---------------------------- | |
| * 0 | Mode Register 1/2 A | Mode Register 1/2 A | |
| * 1 | Status Register A | Clock Select Register A | |
| * 2 | BRG Test | Command Register A | |
| * 3 | Rx Holding Register A | Tx Holding Register A | |
| * 4 | Input Port Change Reg. | Aux. Control Register | |
| * 5 | Interrupt Status Reg. | Interrupt Mask Register | |
| * 6 | Counter/Timer Upper Val | C/T Upper Preset Val. | |
| * 7 | Counter/Timer Lower Val | C/T Lower Preset Val. | |
| * 8 | Mode Register B | Mode Register B | |
| * 9 | Status Register B | Clock Select Register B | |
| * 10 | 1X/16X Test | Command Register B | |
| * 11 | Rx Holding Register B | Tx Holding Register B | |
| * 12 | *Reserved* | *Reserved* | |
| * 13 | Input Ports IP0 to IP6 | Output Port Conf. Reg. | |
| * 14 | Start Counter Command | Set Output Port Bits Cmd. | |
| * 15 | Stop Counter Command | Reset Output Port Bits Cmd. | |
| */ | |
| uint32 iu_read(uint32 pa, size_t size) | |
| { | |
| uint8 reg, modep; | |
| uint32 data; | |
| reg = (uint8) (pa - IUBASE); | |
| switch (reg) { | |
| case MR12A: | |
| modep = iu_console.modep; | |
| data = iu_console.mode[modep]; | |
| iu_increment_a = TRUE; | |
| break; | |
| case SRA: | |
| data = iu_console.stat; | |
| break; | |
| case RHRA: | |
| if (iu_console.conf & RX_EN) { | |
| data = iu_console.rxbuf[iu_console.r_p]; | |
| iu_console.r_p = (iu_console.r_p + 1) % IU_BUF_SIZE; | |
| /* If the FIFO is not empty, we must cause another interrupt | |
| * to continue reading */ | |
| if (iu_console.r_p == iu_console.w_p) { | |
| iu_console.stat &= ~(STS_RXR|STS_FFL); | |
| iu_state.istat &= ~ISTS_RAI; | |
| } else if (iu_state.imr & IMR_RXRA) { | |
| csr_data |= CSRUART; | |
| } | |
| } | |
| break; | |
| case IPCR: | |
| data = iu_state.ipcr; | |
| /* Reading the port resets it */ | |
| iu_state.ipcr = 0; | |
| csr_data &= ~CSRUART; | |
| break; | |
| case ISR: | |
| data = iu_state.istat; | |
| break; | |
| case CTU: | |
| data = (iu_timer_state.c_set >> 8) & 0xff; | |
| break; | |
| case CTL: | |
| data = iu_timer_state.c_set & 0xff; | |
| break; | |
| case MR12B: | |
| modep = iu_contty.modep; | |
| data = iu_contty.mode[modep]; | |
| iu_increment_b = TRUE; | |
| break; | |
| case SRB: | |
| data = iu_contty.stat; | |
| break; | |
| case RHRB: | |
| if (iu_contty.conf & RX_EN) { | |
| data = iu_contty.rxbuf[iu_contty.r_p]; | |
| iu_contty.r_p = (iu_contty.r_p + 1) % IU_BUF_SIZE; | |
| /* If the FIFO is not empty, we must cause another interrupt | |
| * to continue reading */ | |
| if (iu_contty.r_p == iu_contty.w_p) { | |
| iu_contty.stat &= ~(STS_RXR|STS_FFL); | |
| iu_state.istat &= ~ISTS_RBI; | |
| } else if (iu_state.imr & IMR_RXRB) { | |
| csr_data |= CSRUART; | |
| } | |
| } | |
| break; | |
| case INPRT: | |
| data = iu_state.inprt; | |
| break; | |
| case START_CTR: | |
| data = 0; | |
| iu_state.istat &= ~ISTS_CRI; | |
| sim_activate_abs(&iu_timer_unit, iu_timer_state.c_set * IU_TIMER_RATE); | |
| break; | |
| case STOP_CTR: | |
| data = 0; | |
| iu_state.istat &= ~ISTS_CRI; | |
| csr_data &= ~CSRUART; | |
| sim_cancel(&iu_timer_unit); | |
| break; | |
| case 17: /* Clear DMAC interrupt */ | |
| data = 0; | |
| csr_data &= ~CSRDMA; | |
| break; | |
| default: | |
| data = 0; | |
| break; | |
| } | |
| return data; | |
| } | |
| void iu_write(uint32 pa, uint32 val, size_t size) | |
| { | |
| uint8 reg; | |
| uint8 modep; | |
| uint8 bval = (uint8) val; | |
| char line_config[16]; | |
| reg = (uint8) (pa - IUBASE); | |
| switch (reg) { | |
| case MR12A: | |
| modep = iu_console.modep; | |
| iu_console.mode[modep] = bval; | |
| iu_increment_a = TRUE; | |
| break; | |
| case CSRA: | |
| if (brg_rates[brg_reg][brg_clk] != NULL) { | |
| sprintf(line_config, "%s-%d%s1", | |
| brg_rates[brg_reg][brg_clk], | |
| bits_per_char, | |
| parity[parity_sel]); | |
| sim_debug(EXECUTE_MSG, &contty_dev, | |
| "Setting CONTTY line to %s\n", | |
| line_config); | |
| tmxr_set_config_line(&contty_ldsc[0], line_config); | |
| } | |
| break; | |
| case CRA: /* Command A */ | |
| iu_w_cmd(PORT_A, bval); | |
| break; | |
| case THRA: /* TX/RX Buf A */ | |
| iu_tx(PORT_A, bval); | |
| sim_activate_abs(&tto_unit, tto_unit.wait); | |
| break; | |
| case ACR: /* Auxiliary Control Register */ | |
| iu_state.acr = bval; | |
| brg_reg = (bval >> 7) & 1; | |
| break; | |
| case IMR: | |
| iu_state.imr = bval; | |
| csr_data &= ~CSRUART; | |
| /* Possibly cause an interrupt */ | |
| iu_txrdy_a_irq(); | |
| iu_txrdy_b_irq(); | |
| break; | |
| case CTUR: /* Counter/Timer Upper Preset Value */ | |
| /* Clear out high byte */ | |
| iu_timer_state.c_set &= 0x00ff; | |
| /* Set high byte */ | |
| iu_timer_state.c_set |= ((uint16) bval << 8); | |
| break; | |
| case CTLR: /* Counter/Timer Lower Preset Value */ | |
| /* Clear out low byte */ | |
| iu_timer_state.c_set &= 0xff00; | |
| /* Set low byte */ | |
| iu_timer_state.c_set |= bval; | |
| break; | |
| case MR12B: | |
| modep = iu_contty.modep; | |
| iu_contty.mode[modep] = bval; | |
| iu_increment_b = TRUE; | |
| if (modep == 0) { | |
| if ((bval >> 4) & 1) { | |
| /* No parity */ | |
| parity_sel = IU_PARITY_NONE; | |
| } else { | |
| /* Parity enabled */ | |
| if (bval & 4) { | |
| parity_sel = IU_PARITY_ODD; | |
| } else { | |
| parity_sel = IU_PARITY_EVEN; | |
| } | |
| } | |
| bits_per_char = (bval & 3) + 5; | |
| } | |
| break; | |
| case CRB: /* Command B */ | |
| iu_w_cmd(PORT_B, bval); | |
| break; | |
| case CSRB: | |
| brg_clk = (bval >> 4) & 0xf; | |
| if (brg_rates[brg_reg][brg_clk] != NULL) { | |
| sprintf(line_config, "%s-%d%s1", | |
| brg_rates[brg_reg][brg_clk], | |
| bits_per_char, | |
| parity[parity_sel]); | |
| sim_debug(EXECUTE_MSG, &contty_dev, | |
| "Setting CONTTY line to %s\n", | |
| line_config); | |
| tmxr_set_config_line(&contty_ldsc[0], line_config); | |
| } | |
| break; | |
| case THRB: /* TX/RX Buf B */ | |
| iu_tx(PORT_B, bval); | |
| sim_activate_abs(contty_xmt_unit, contty_ldsc[0].txdelta); | |
| break; | |
| case OPCR: | |
| iu_state.opcr = bval; | |
| break; | |
| case SOPR: | |
| /* Bit 2 of the IU output register is used as a soft power | |
| * switch. When set, the machine will power down | |
| * immediately. */ | |
| if (bval & IU_KILLPWR) { | |
| stop_reason = STOP_POWER; | |
| } | |
| break; | |
| case ROPR: | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| t_stat iu_tx(uint8 portno, uint8 val) | |
| { | |
| IU_PORT *p = (portno == PORT_A) ? &iu_console : &iu_contty; | |
| UNIT *uptr = (portno == PORT_A) ? &tto_unit : contty_xmt_unit; | |
| uint8 ists = (portno == PORT_A) ? ISTS_RAI : ISTS_RBI; | |
| uint8 imr_mask = (portno == PORT_A) ? IMR_RXRA : IMR_RXRB; | |
| int32 c; | |
| t_stat status = SCPE_OK; | |
| if (p->conf & TX_EN) { | |
| if ((p->mode[1] & 0xc0) == 0x80) { /* Loopback mode */ | |
| p->txbuf = val; | |
| /* This is also a Receive */ | |
| if ((p->stat & STS_FFL) == 0) { | |
| p->rxbuf[p->w_p] = val; | |
| p->w_p = (p->w_p + 1) % IU_BUF_SIZE; | |
| if (p->w_p == p->r_p) { | |
| p->stat |= STS_FFL; | |
| } | |
| } | |
| p->stat |= STS_RXR; | |
| if (iu_state.imr & imr_mask) { | |
| iu_state.istat |= ists; | |
| csr_data |= CSRUART; | |
| } | |
| return SCPE_OK; | |
| } else { /* Direct mode */ | |
| c = sim_tt_outcvt(val, TTUF_MODE_8B); | |
| if (c >= 0) { | |
| p->txbuf = c; | |
| p->stat &= ~(STS_TXR|STS_TXE); | |
| iu_state.istat &= ~(1 << (portno*4)); | |
| if (portno == PORT_A) { | |
| /* Write the character to the SIMH console */ | |
| sim_debug(EXECUTE_MSG, &tto_dev, | |
| "[iu_tx] CONSOLE transmit %02x (%c)\n", | |
| (uint8) c, (char) c); | |
| status = sim_putchar_s(c); | |
| } else { | |
| sim_debug(EXECUTE_MSG, &contty_dev, | |
| "[iu_tx] CONTTY transmit %02x (%c)\n", | |
| (uint8) c, (char) c); | |
| status = tmxr_putc_ln(&contty_ldsc[0], c); | |
| } | |
| } | |
| } | |
| } | |
| return status; | |
| } | |
| static SIM_INLINE void iu_w_cmd(uint8 portno, uint8 cmd) | |
| { | |
| IU_PORT *p; | |
| if (portno == 0) { | |
| p = &iu_console; | |
| } else { | |
| p = &iu_contty; | |
| } | |
| /* Enable or disable transmitter */ | |
| /* Disable always wins, if both are set */ | |
| if (cmd & CMD_DTX) { | |
| p->conf &= ~TX_EN; | |
| p->stat &= ~STS_TXR; | |
| p->stat &= ~STS_TXE; | |
| p->drq = FALSE; | |
| p->dma = FALSE; | |
| } else if (cmd & CMD_ETX) { | |
| p->conf |= TX_EN; | |
| /* TXE and TXR are always set by an ENABLE */ | |
| p->stat |= STS_TXR; | |
| p->stat |= STS_TXE; | |
| p->drq = TRUE; | |
| iu_state.istat |= 1 << (portno*4); | |
| if (portno == 0) { | |
| iu_txrdy_a_irq(); | |
| } else { | |
| iu_txrdy_b_irq(); | |
| } | |
| } | |
| /* Enable or disable receiver. */ | |
| /* Disable always wins, if both are set */ | |
| if (cmd & CMD_DRX) { | |
| p->conf &= ~RX_EN; | |
| p->stat &= ~STS_RXR; | |
| } else if (cmd & CMD_ERX) { | |
| p->conf |= RX_EN; | |
| } | |
| /* Command register bits 6-4 have special meaning */ | |
| switch ((cmd >> CMD_MISC_SHIFT) & CMD_MISC_MASK) { | |
| case 1: | |
| /* Causes the Channel A MR pointer to point to MR1. */ | |
| p->modep = 0; | |
| break; | |
| case 2: | |
| /* Reset receiver. Resets the Channel's receiver as if a | |
| hardware reset had been applied. The receiver is disabled | |
| and the FIFO is flushed. */ | |
| p->stat &= ~STS_RXR; | |
| p->conf &= ~RX_EN; | |
| p->w_p = 0; | |
| p->r_p = 0; | |
| break; | |
| case 3: | |
| /* Reset transmitter. Resets the Channel's transmitter as if a | |
| hardware reset had been applied. */ | |
| p->stat &= ~STS_TXR; | |
| p->stat &= ~STS_TXE; | |
| p->conf &= ~TX_EN; | |
| p->w_p = 0; | |
| p->r_p = 0; | |
| break; | |
| case 4: | |
| /* Reset error status. Clears the Channel's Received Break, | |
| Parity Error, and Overrun Error bits in the status register | |
| (SRA[7:4]). Used in character mode to clear OE status | |
| (although RB, PE and FE bits will also be cleared) and in | |
| block mode to clear all error status after a block of data | |
| has been received. */ | |
| p->stat &= ~(STS_FER|STS_PER|STS_OER); | |
| break; | |
| case 5: | |
| /* Reset Channel's break change interrupt. Causes the Channel | |
| A break detect change bit in the interrupt status register | |
| (ISR[2] for Chan. A, ISR[6] for Chan. B) to be cleared to | |
| zero. */ | |
| iu_state.istat &= ~(1 << (2 + portno*4)); | |
| break; | |
| case 6: | |
| /* Start break. Forces the TxDA output LOW (spacing). If the | |
| transmitter is empty the start of the break condition will | |
| be delayed up to two bit times. If the transmitter is | |
| active the break begins when transmission of the character | |
| is completed. If a character is in the THR, the start of | |
| the break will be delayed until that character, or any | |
| other loaded subsequently are transmitted. The transmitter | |
| must be enabled for this command to be accepted. */ | |
| /* Not Implemented */ | |
| break; | |
| case 7: | |
| /* Stop break. The TxDA line will go HIGH (marking) within two | |
| bit times. TxDA will remain HIGH for one bit time before | |
| the next character, if any, is transmitted. */ | |
| /* Not Implemented */ | |
| break; | |
| } | |
| } | |
| /* | |
| * Initiate DMA transfer or continue one already in progress. | |
| */ | |
| void iu_dma(uint8 channel, uint32 service_address) | |
| { | |
| uint8 data; | |
| uint32 addr; | |
| t_stat status = SCPE_OK; | |
| dma_channel *chan = &dma_state.channels[channel]; | |
| UNIT *uptr = (channel == DMA_IUA_CHAN) ? &tto_unit : contty_xmt_unit; | |
| IU_PORT *port = (channel == DMA_IUA_CHAN) ? &iu_console : &iu_contty; | |
| /* Immediate acknowledge of DMA */ | |
| port->drq = FALSE; | |
| if (!port->dma) { | |
| /* Set DMA transfer type */ | |
| port->dma = 1u << ((dma_state.mode >> 2) & 0xf); | |
| } | |
| if (port->dma == DMA_READ) { | |
| addr = dma_address(channel, chan->ptr, TRUE); | |
| chan->addr_c = chan->addr + chan->ptr + 1; | |
| data = pread_b(addr); | |
| status = iu_tx(channel - 2, data); | |
| if (status == SCPE_OK) { | |
| chan->ptr++; | |
| chan->wcount_c--; | |
| } else if (status == SCPE_LOST) { | |
| chan->ptr = 0; | |
| chan->wcount_c = -1; | |
| } | |
| sim_activate_abs(uptr, uptr->wait); | |
| if (chan->wcount_c >= 0) { | |
| /* Return early so we don't finish DMA */ | |
| return; | |
| } | |
| } | |
| /* Done with DMA */ | |
| port->dma = DMA_NONE; | |
| dma_state.mask |= (1 << channel); | |
| dma_state.status |= (1 << channel); | |
| csr_data |= CSRDMA; | |
| } |