/* pdp8_ct.c: PDP-8 cassette tape simulator | |
Copyright (c) 2006-2013, Robert M Supnik | |
Permission is hereby granted, free of charge, to any person obtaining a | |
copy of this software and associated documentation files (the "Software"), | |
to deal in the Software without restriction, including without limitation | |
the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
and/or sell copies of the Software, and to permit persons to whom the | |
Software is furnished to do so, subject to the following conditions: | |
The above copyright notice and this permission notice shall be included in | |
all copies or substantial portions of the Software. | |
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
Except as contained in this notice, the name of Robert M Supnik shall not be | |
used in advertising or otherwise to promote the sale, use or other dealings | |
in this Software without prior written authorization from Robert M Supnik. | |
ct TA8E/TU60 cassette tape | |
17-Sep-07 RMS Changed to use central set_bootpc routine | |
13-Aug-07 RMS Fixed handling of BEOT | |
06-Aug-07 RMS Foward op at BOT skips initial file gap | |
30-May-07 RMS Fixed typo (Norm Lastovica) | |
Magnetic tapes are represented as a series of variable records | |
of the form: | |
32b byte count | |
byte 0 | |
byte 1 | |
: | |
byte n-2 | |
byte n-1 | |
32b byte count | |
If the byte count is odd, the record is padded with an extra byte | |
of junk. File marks are represented by a byte count of 0. | |
Cassette format differs in one very significant way: it has file gaps | |
rather than file marks. If the controller spaces or reads into a file | |
gap and then reverses direction, the file gap is not seen again. This | |
is in contrast to magnetic tapes, where the file mark is a character | |
sequence and is seen again if direction is reversed. In addition, | |
cassettes have an initial file gap which is automatically skipped on | |
forward operations from beginning of tape. | |
Note that the read and write sequences for the cassette are asymmetric: | |
Read: KLSA /SELECT READ | |
KGOA /INIT READ, CLEAR DF | |
<data flag sets, char in buf> | |
KGOA /READ 1ST CHAR, CLEAR DF | |
DCA CHAR | |
: | |
<data flag sets, char in buf> | |
KGOA /READ LAST CHAR, CLEAR DF | |
DCA CHAR | |
<data flag sets, CRC1 in buf> | |
KLSA /SELECT CRC MODE | |
KGOA /READ 1ST CRC | |
<data flag sets, CRC2 in buf> | |
KGOA /READ 2ND CRC | |
<ready flag/CRC error flag sets> | |
Write: KLSA /SELECT WRITE | |
TAD CHAR /1ST CHAR | |
KGOA /INIT WRITE, CHAR TO BUF, CLEAR DF | |
<data flag sets, char to tape> | |
: | |
TAD CHAR /LAST CHAR | |
KGOA /CHAR TO BUF, CLEAR DF | |
<data flag sets, char to tape> | |
KLSA /SELECT CRC MODE | |
KGOA /WRITE CRC, CLEAR DF | |
<ready flag sets, CRC on tape> | |
*/ | |
#include "pdp8_defs.h" | |
#include "sim_tape.h" | |
#define CT_NUMDR 2 /* #drives */ | |
#define FNC u3 /* unit function */ | |
#define UST u4 /* unit status */ | |
#define CT_MAXFR (CT_SIZE) /* max record lnt */ | |
#define CT_SIZE 93000 /* chars/tape */ | |
/* Status Register A */ | |
#define SRA_ENAB 0200 /* enable */ | |
#define SRA_V_UNIT 6 /* unit */ | |
#define SRA_M_UNIT (CT_NUMDR - 1) | |
#define SRA_V_FNC 3 /* function */ | |
#define SRA_M_FNC 07 | |
#define SRA_READ 00 | |
#define SRA_REW 01 | |
#define SRA_WRITE 02 | |
#define SRA_SRF 03 | |
#define SRA_WFG 04 | |
#define SRA_SRB 05 | |
#define SRA_CRC 06 | |
#define SRA_SFF 07 | |
#define SRA_2ND 010 | |
#define SRA_IE 0001 /* int enable */ | |
#define GET_UNIT(x) (((x) >> SRA_V_UNIT) & SRA_M_UNIT) | |
#define GET_FNC(x) (((x) >> SRA_V_FNC) & SRA_M_FNC) | |
/* Function code flags */ | |
#define OP_WRI 01 /* op is a write */ | |
#define OP_REV 02 /* op is rev motion */ | |
#define OP_FWD 04 /* op is fwd motion */ | |
/* Unit status flags */ | |
#define UST_REV (OP_REV) /* last op was rev */ | |
#define UST_GAP 01 /* last op hit gap */ | |
/* Status Register B, ^ = computed on the fly */ | |
#define SRB_WLE 0400 /* "write lock err" */ | |
#define SRB_CRC 0200 /* CRC error */ | |
#define SRB_TIM 0100 /* timing error */ | |
#define SRB_BEOT 0040 /* ^BOT/EOT */ | |
#define SRB_EOF 0020 /* end of file */ | |
#define SRB_EMP 0010 /* ^drive empty */ | |
#define SRB_REW 0004 /* rewinding */ | |
#define SRB_WLK 0002 /* ^write locked */ | |
#define SRB_RDY 0001 /* ^ready */ | |
#define SRB_ALLERR (SRB_WLE|SRB_CRC|SRB_TIM|SRB_BEOT|SRB_EOF|SRB_EMP) | |
#define SRB_XFRERR (SRB_WLE|SRB_CRC|SRB_TIM|SRB_EOF) | |
extern int32 int_req, stop_inst; | |
extern UNIT cpu_unit; | |
uint32 ct_sra = 0; /* status reg A */ | |
uint32 ct_srb = 0; /* status reg B */ | |
uint32 ct_db = 0; /* data buffer */ | |
uint32 ct_df = 0; /* data flag */ | |
uint32 ct_write = 0; /* TU60 write flag */ | |
uint32 ct_bptr = 0; /* buf ptr */ | |
uint32 ct_blnt = 0; /* buf length */ | |
int32 ct_stime = 1000; /* start time */ | |
int32 ct_ctime = 100; /* char latency */ | |
uint32 ct_stopioe = 1; /* stop on error */ | |
uint8 *ct_xb = NULL; /* transfer buffer */ | |
static uint8 ct_fnc_tab[SRA_M_FNC + 1] = { | |
OP_FWD, 0 , OP_WRI|OP_FWD, OP_REV, | |
OP_WRI|OP_FWD, OP_REV, 0, OP_FWD | |
}; | |
DEVICE ct_dev; | |
int32 ct70 (int32 IR, int32 AC); | |
t_stat ct_svc (UNIT *uptr); | |
t_stat ct_reset (DEVICE *dptr); | |
t_stat ct_attach (UNIT *uptr, char *cptr); | |
t_stat ct_detach (UNIT *uptr); | |
t_stat ct_boot (int32 unitno, DEVICE *dptr); | |
uint32 ct_updsta (UNIT *uptr); | |
int32 ct_go_start (int32 AC); | |
int32 ct_go_cont (UNIT *uptr, int32 AC); | |
t_stat ct_map_err (UNIT *uptr, t_stat st); | |
UNIT *ct_busy (void); | |
void ct_set_df (t_bool timchk); | |
t_bool ct_read_char (void); | |
uint32 ct_crc (uint8 *buf, uint32 cnt); | |
/* CT data structures | |
ct_dev CT device descriptor | |
ct_unit CT unit list | |
ct_reg CT register list | |
ct_mod CT modifier list | |
*/ | |
DIB ct_dib = { DEV_CT, 1, { &ct70 } }; | |
UNIT ct_unit[] = { | |
{ UDATA (&ct_svc, UNIT_ATTABLE+UNIT_ROABLE, CT_SIZE) }, | |
{ UDATA (&ct_svc, UNIT_ATTABLE+UNIT_ROABLE, CT_SIZE) }, | |
}; | |
REG ct_reg[] = { | |
{ ORDATA (CTSRA, ct_sra, 8) }, | |
{ ORDATA (CTSRB, ct_srb, 8) }, | |
{ ORDATA (CTDB, ct_db, 8) }, | |
{ FLDATA (CTDF, ct_df, 0) }, | |
{ FLDATA (RDY, ct_srb, 0) }, | |
{ FLDATA (WLE, ct_srb, 8) }, | |
{ FLDATA (WRITE, ct_write, 0) }, | |
{ FLDATA (INT, int_req, INT_V_CT) }, | |
{ DRDATA (BPTR, ct_bptr, 17) }, | |
{ DRDATA (BLNT, ct_blnt, 17) }, | |
{ DRDATA (STIME, ct_stime, 24), PV_LEFT + REG_NZ }, | |
{ DRDATA (CTIME, ct_ctime, 24), PV_LEFT + REG_NZ }, | |
{ FLDATA (STOP_IOE, ct_stopioe, 0) }, | |
{ URDATA (UFNC, ct_unit[0].FNC, 8, 4, 0, CT_NUMDR, 0), REG_HRO }, | |
{ URDATA (UST, ct_unit[0].UST, 8, 2, 0, CT_NUMDR, 0), REG_HRO }, | |
{ URDATA (POS, ct_unit[0].pos, 10, T_ADDR_W, 0, | |
CT_NUMDR, PV_LEFT | REG_RO) }, | |
{ FLDATA (DEVNUM, ct_dib.dev, 6), REG_HRO }, | |
{ NULL } | |
}; | |
MTAB ct_mod[] = { | |
{ MTUF_WLK, 0, "write enabled", "WRITEENABLED", NULL }, | |
{ MTUF_WLK, MTUF_WLK, "write locked", "LOCKED", NULL }, | |
// { MTAB_XTD|MTAB_VUN, 0, "FORMAT", "FORMAT", | |
// &sim_tape_set_fmt, &sim_tape_show_fmt, NULL }, | |
{ MTAB_XTD|MTAB_VUN, 0, "CAPACITY", NULL, | |
NULL, &sim_tape_show_capac, NULL }, | |
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO", | |
&set_dev, &show_dev, NULL }, | |
{ 0 } | |
}; | |
DEVICE ct_dev = { | |
"CT", ct_unit, ct_reg, ct_mod, | |
CT_NUMDR, 10, 31, 1, 8, 8, | |
NULL, NULL, &ct_reset, | |
&ct_boot, &ct_attach, &ct_detach, | |
&ct_dib, DEV_DISABLE | DEV_DIS | DEV_DEBUG | DEV_TAPE | |
}; | |
/* IOT routines */ | |
int32 ct70 (int32 IR, int32 AC) | |
{ | |
int32 srb; | |
UNIT *uptr; | |
srb = ct_updsta (NULL); /* update status */ | |
switch (IR & 07) { /* decode IR<9:11> */ | |
case 0: /* KCLR */ | |
ct_reset (&ct_dev); /* reset the world */ | |
break; | |
case 1: /* KSDR */ | |
if (ct_df) | |
AC |= IOT_SKP; | |
break; | |
case 2: /* KSEN */ | |
if (srb & SRB_ALLERR) | |
AC |= IOT_SKP; | |
break; | |
case 3: /* KSBF */ | |
if ((srb & SRB_RDY) && !(srb & SRB_EMP)) | |
AC |= IOT_SKP; | |
break; | |
case 4: /* KLSA */ | |
ct_sra = AC & 0377; | |
ct_updsta (NULL); | |
return ct_sra ^ 0377; | |
case 5: /* KSAF */ | |
if (ct_df || (srb & (SRB_ALLERR|SRB_RDY))) | |
AC |= IOT_SKP; | |
break; | |
case 6: /* KGOA */ | |
ct_df = 0; /* clear data flag */ | |
if ((uptr = ct_busy ())) /* op in progress? */ | |
AC = ct_go_cont (uptr, AC); /* yes */ | |
else AC = ct_go_start (AC); /* no, start */ | |
ct_updsta (NULL); | |
break; | |
case 7: /* KSRB */ | |
return srb & 0377; | |
} /* end switch */ | |
return AC; | |
} | |
/* Start a new operation - cassette is not busy */ | |
int32 ct_go_start (int32 AC) | |
{ | |
UNIT *uptr = ct_dev.units + GET_UNIT (ct_sra); | |
uint32 fnc = GET_FNC (ct_sra); | |
uint32 flg = ct_fnc_tab[fnc]; | |
uint32 old_ust = uptr->UST; | |
if (DEBUG_PRS (ct_dev)) fprintf (sim_deb, | |
">>CT start: op=%o, old_sta = %o, pos=%d\n", | |
fnc, uptr->UST, uptr->pos); | |
if ((ct_sra & SRA_ENAB) && (uptr->flags & UNIT_ATT)) { /* enabled, att? */ | |
ct_srb &= ~(SRB_XFRERR|SRB_REW); /* clear err, rew */ | |
if (flg & OP_WRI) { /* write-type op? */ | |
if (sim_tape_wrp (uptr)) { /* locked? */ | |
ct_srb |= SRB_WLE; /* set flag, abort */ | |
return AC; | |
} | |
ct_write = 1; /* set TU60 wr flag */ | |
ct_db = AC & 0377; | |
} | |
else { | |
ct_write = 0; | |
ct_db = 0; | |
} | |
ct_srb &= ~SRB_BEOT; /* tape in motion */ | |
if (fnc == SRA_REW) /* rew? set flag */ | |
ct_srb |= SRB_REW; | |
if ((fnc != SRA_REW) && !(flg & OP_WRI)) { /* read cmd? */ | |
t_mtrlnt t; | |
t_stat st; | |
uptr->UST = flg & UST_REV; /* save direction */ | |
if (sim_tape_bot (uptr) && (flg & OP_FWD)) { /* spc/read fwd bot? */ | |
st = sim_tape_rdrecf (uptr, ct_xb, &t, CT_MAXFR); /* skip file gap */ | |
if (st != MTSE_TMK) /* not there? */ | |
sim_tape_rewind (uptr); /* restore tap pos */ | |
else old_ust = 0; /* defang next */ | |
} | |
if ((old_ust ^ uptr->UST) == (UST_REV|UST_GAP)) { /* rev in gap? */ | |
if (DEBUG_PRS (ct_dev)) fprintf (sim_deb, | |
">>CT skip gap: op=%o, old_sta = %o, pos=%d\n", | |
fnc, uptr->UST, uptr->pos); | |
if (uptr->UST) /* skip file gap */ | |
sim_tape_rdrecr (uptr, ct_xb, &t, CT_MAXFR); | |
else sim_tape_rdrecf (uptr, ct_xb, &t, CT_MAXFR); | |
} | |
} | |
else uptr->UST = 0; | |
ct_bptr = 0; /* init buffer */ | |
ct_blnt = 0; | |
uptr->FNC = fnc; /* save function */ | |
sim_activate (uptr, ct_stime); /* schedule op */ | |
} | |
if ((fnc == SRA_READ) || (fnc == SRA_CRC)) /* read or CRC? */ | |
return 0; /* get "char" */ | |
return AC; | |
} | |
/* Continue an in-progress operation - cassette is in motion */ | |
int32 ct_go_cont (UNIT *uptr, int32 AC) | |
{ | |
int32 fnc = GET_FNC (ct_sra); | |
switch (fnc) { /* case on function */ | |
case SRA_READ: /* read */ | |
return ct_db; /* return data */ | |
case SRA_WRITE: /* write */ | |
ct_db = AC & 0377; /* save data */ | |
break; | |
case SRA_CRC: /* CRC */ | |
if ((uptr->FNC & SRA_M_FNC) != SRA_CRC) /* if not CRC */ | |
uptr->FNC = SRA_CRC; /* start CRC seq */ | |
if (!ct_write) /* read? AC <- buf */ | |
return ct_db; | |
break; | |
default: | |
break; | |
} | |
return AC; | |
} | |
/* Unit service */ | |
t_stat ct_svc (UNIT *uptr) | |
{ | |
uint32 i, crc; | |
uint32 flgs = ct_fnc_tab[uptr->FNC & SRA_M_FNC]; | |
t_mtrlnt tbc; | |
t_stat st, r; | |
if ((uptr->flags & UNIT_ATT) == 0) { /* not attached? */ | |
ct_updsta (uptr); /* update status */ | |
return (ct_stopioe? SCPE_UNATT: SCPE_OK); | |
} | |
if (((flgs & OP_REV) && sim_tape_bot (uptr)) || /* rev at BOT or */ | |
((flgs & OP_FWD) && sim_tape_eot (uptr))) { /* fwd at EOT? */ | |
ct_srb |= SRB_BEOT; /* error */ | |
ct_updsta (uptr); /* op done */ | |
return SCPE_OK; | |
} | |
r = SCPE_OK; | |
switch (uptr->FNC) { /* case on function */ | |
case SRA_READ: /* read start */ | |
st = sim_tape_rdrecf (uptr, ct_xb, &ct_blnt, CT_MAXFR); /* get rec */ | |
if (st == MTSE_RECE) /* rec in err? */ | |
ct_srb |= SRB_CRC; | |
else if (st != MTSE_OK) { /* other error? */ | |
r = ct_map_err (uptr, st); /* map error */ | |
break; | |
} | |
crc = ct_crc (ct_xb, ct_blnt); /* calculate CRC */ | |
ct_xb[ct_blnt++] = (crc >> 8) & 0377; /* append to buffer */ | |
ct_xb[ct_blnt++] = crc & 0377; | |
uptr->FNC |= SRA_2ND; /* next state */ | |
sim_activate (uptr, ct_ctime); /* sched next char */ | |
return SCPE_OK; | |
case SRA_READ|SRA_2ND: /* read char */ | |
if (!ct_read_char ()) /* read, overrun? */ | |
break; | |
ct_set_df (TRUE); /* set data flag */ | |
sim_activate (uptr, ct_ctime); /* sched next char */ | |
return SCPE_OK; | |
case SRA_WRITE: /* write start */ | |
for (i = 0; i < CT_MAXFR; i++) /* clear buffer */ | |
ct_xb[i] = 0; | |
uptr->FNC |= SRA_2ND; /* next state */ | |
sim_activate (uptr, ct_ctime); /* sched next char */ | |
return SCPE_OK; | |
case SRA_WRITE|SRA_2ND: /* write char */ | |
if ((ct_bptr < CT_MAXFR) && /* room in buf? */ | |
((uptr->pos + ct_bptr) < uptr->capac)) /* room on tape? */ | |
ct_xb[ct_bptr++] = ct_db; /* store char */ | |
ct_set_df (TRUE); /* set data flag */ | |
sim_activate (uptr, ct_ctime); /* sched next char */ | |
return SCPE_OK; | |
case SRA_CRC: /* CRC */ | |
if (ct_write) { /* write? */ | |
if ((st = sim_tape_wrrecf (uptr, ct_xb, ct_bptr)))/* write, err? */ | |
r = ct_map_err (uptr, st); /* map error */ | |
break; /* write done */ | |
} | |
ct_read_char (); /* get second CRC */ | |
ct_set_df (FALSE); /* set df */ | |
uptr->FNC |= SRA_2ND; /* next state */ | |
sim_activate (uptr, ct_ctime); | |
return SCPE_OK; | |
case SRA_CRC|SRA_2ND: /* second read CRC */ | |
if (ct_bptr != ct_blnt) { /* partial read? */ | |
crc = ct_crc (ct_xb, ct_bptr); /* actual CRC */ | |
if (crc != 0) /* must be zero */ | |
ct_srb |= SRB_CRC; | |
} | |
break; /* read done */ | |
case SRA_WFG: /* write file gap */ | |
if ((st = sim_tape_wrtmk (uptr))) /* write tmk, err? */ | |
r = ct_map_err (uptr, st); /* map error */ | |
break; | |
case SRA_REW: /* rewind */ | |
sim_tape_rewind (uptr); | |
ct_srb |= SRB_BEOT; /* set BOT */ | |
break; | |
case SRA_SRB: /* space rev blk */ | |
if ((st = sim_tape_sprecr (uptr, &tbc))) /* space rev, err? */ | |
r = ct_map_err (uptr, st); /* map error */ | |
break; | |
case SRA_SRF: /* space rev file */ | |
while ((st = sim_tape_sprecr (uptr, &tbc)) == MTSE_OK) ; | |
r = ct_map_err (uptr, st); /* map error */ | |
break; | |
case SRA_SFF: /* space fwd file */ | |
while ((st = sim_tape_sprecf (uptr, &tbc)) == MTSE_OK) ; | |
r = ct_map_err (uptr, st); /* map error */ | |
break; | |
default: /* never get here! */ | |
return SCPE_IERR; | |
} /* end case */ | |
ct_updsta (uptr); /* update status */ | |
if (DEBUG_PRS (ct_dev)) fprintf (sim_deb, | |
">>CT done: op=%o, statusA = %o, statusB = %o, pos=%d\n", | |
uptr->FNC, ct_sra, ct_srb, uptr->pos); | |
return r; | |
} | |
/* Update controller status */ | |
uint32 ct_updsta (UNIT *uptr) | |
{ | |
int32 srb; | |
if (uptr == NULL) { /* unit specified? */ | |
uptr = ct_busy (); /* use busy unit */ | |
if ((uptr == NULL) && (ct_sra & SRA_ENAB)) /* none busy? */ | |
uptr = ct_dev.units + GET_UNIT (ct_sra); /* use sel unit */ | |
} | |
else if (ct_srb & SRB_EOF) /* save gap */ | |
uptr->UST |= UST_GAP; | |
if (uptr) { /* any unit? */ | |
ct_srb &= ~(SRB_WLK|SRB_EMP|SRB_RDY); /* clear dyn flags */ | |
if ((uptr->flags & UNIT_ATT) == 0) /* unattached? */ | |
ct_srb = (ct_srb | SRB_EMP|SRB_WLK) & ~SRB_REW; /* empty, locked */ | |
if (!sim_is_active (uptr)) { /* not busy? */ | |
ct_srb = (ct_srb | SRB_RDY) & ~SRB_REW; /* ready, ~rew */ | |
} | |
if (sim_tape_wrp (uptr) || (ct_srb & SRB_REW)) /* locked or rew? */ | |
ct_srb |= SRB_WLK; /* set locked */ | |
} | |
if (ct_sra & SRA_ENAB) /* can TA see TU60? */ | |
srb = ct_srb; | |
else srb = 0; /* no */ | |
if ((ct_sra & SRA_IE) && /* int enabled? */ | |
(ct_df || (srb & (SRB_ALLERR|SRB_RDY)))) /* any flag? */ | |
int_req |= INT_CT; /* set int req */ | |
else int_req &= ~INT_CT; /* no, clr int req */ | |
return srb; | |
} | |
/* Set data flag */ | |
void ct_set_df (t_bool timchk) | |
{ | |
if (ct_df && timchk) /* flag still set? */ | |
ct_srb |= SRB_TIM; | |
ct_df = 1; /* set data flag */ | |
if (ct_sra & SRA_IE) /* if ie, int req */ | |
int_req |= INT_CT; | |
return; | |
} | |
/* Read character */ | |
t_bool ct_read_char (void) | |
{ | |
if (ct_bptr < ct_blnt) { /* more chars? */ | |
ct_db = ct_xb[ct_bptr++]; | |
return TRUE; | |
} | |
ct_db = 0; | |
ct_srb |= SRB_CRC; /* overrun */ | |
return FALSE; | |
} | |
/* Test if controller busy */ | |
UNIT *ct_busy (void) | |
{ | |
uint32 u; | |
UNIT *uptr; | |
for (u = 0; u < CT_NUMDR; u++) { /* loop thru units */ | |
uptr = ct_dev.units + u; | |
if (sim_is_active (uptr)) | |
return uptr; | |
} | |
return NULL; | |
} | |
/* Calculate CRC on buffer */ | |
uint32 ct_crc (uint8 *buf, uint32 cnt) | |
{ | |
uint32 crc, i, j; | |
crc = 0; | |
for (i = 0; i < cnt; i++) { | |
crc = crc ^ (((uint32) buf[i]) << 8); | |
for (j = 0; j < 8; j++) { | |
if (crc & 1) | |
crc = (crc >> 1) ^ 0xA001; | |
else crc = crc >> 1; | |
} | |
} | |
return crc; | |
} | |
/* Map error status */ | |
t_stat ct_map_err (UNIT *uptr, t_stat st) | |
{ | |
switch (st) { | |
case MTSE_FMT: /* illegal fmt */ | |
case MTSE_UNATT: /* unattached */ | |
ct_srb |= SRB_CRC; | |
case MTSE_OK: /* no error */ | |
return SCPE_IERR; /* never get here! */ | |
case MTSE_TMK: /* end of file */ | |
ct_srb |= SRB_EOF; | |
break; | |
case MTSE_IOERR: /* IO error */ | |
ct_srb |= SRB_CRC; /* set crc err */ | |
if (ct_stopioe) | |
return SCPE_IOERR; | |
break; | |
case MTSE_INVRL: /* invalid rec lnt */ | |
ct_srb |= SRB_CRC; /* set crc err */ | |
return SCPE_MTRLNT; | |
case MTSE_RECE: /* record in error */ | |
case MTSE_EOM: /* end of medium */ | |
ct_srb |= SRB_CRC; /* set crc err */ | |
break; | |
case MTSE_BOT: /* reverse into BOT */ | |
ct_srb |= SRB_BEOT; /* set BOT */ | |
break; | |
case MTSE_WRP: /* write protect */ | |
ct_srb |= SRB_WLE; /* set wlk err */ | |
break; | |
} | |
return SCPE_OK; | |
} | |
/* Reset routine */ | |
t_stat ct_reset (DEVICE *dptr) | |
{ | |
uint32 u; | |
UNIT *uptr; | |
ct_sra = 0; | |
ct_srb = 0; | |
ct_df = 0; | |
ct_db = 0; | |
ct_write = 0; | |
ct_bptr = 0; | |
ct_blnt = 0; | |
int_req = int_req & ~INT_CT; /* clear interrupt */ | |
for (u = 0; u < CT_NUMDR; u++) { /* loop thru units */ | |
uptr = ct_dev.units + u; | |
sim_cancel (uptr); /* cancel activity */ | |
sim_tape_reset (uptr); /* reset tape */ | |
} | |
if (ct_xb == NULL) | |
ct_xb = (uint8 *) calloc (CT_MAXFR + 2, sizeof (uint8)); | |
if (ct_xb == NULL) | |
return SCPE_MEM; | |
return SCPE_OK; | |
} | |
/* Attach routine */ | |
t_stat ct_attach (UNIT *uptr, char *cptr) | |
{ | |
t_stat r; | |
r = sim_tape_attach (uptr, cptr); | |
if (r != SCPE_OK) | |
return r; | |
ct_updsta (NULL); | |
uptr->UST = 0; | |
return r; | |
} | |
/* Detach routine */ | |
t_stat ct_detach (UNIT* uptr) | |
{ | |
t_stat r; | |
if (!(uptr->flags & UNIT_ATT)) /* check attached */ | |
return SCPE_OK; | |
r = sim_tape_detach (uptr); | |
ct_updsta (NULL); | |
uptr->UST = 0; | |
return r; | |
} | |
/* Bootstrap routine */ | |
#define BOOT_START 04000 | |
#define BOOT_LEN (sizeof (boot_rom) / sizeof (int16)) | |
static const uint16 boot_rom[] = { | |
01237, /* BOOT, TAD M50 /change CRC to REW */ | |
01206, /* CRCCHK, TAD L260 /crc op */ | |
06704, /* KLSA /load op */ | |
06706, /* KGOA /start */ | |
06703, /* KSBF /ready? */ | |
05204, /* RDCOD, JMP .-1 /loop */ | |
07264, /* L260, CML STA RAL /L = 1, AC = halt */ | |
06702, /* KSEN /error? */ | |
07610, /* SKP CLA /halt on any error */ | |
03211, /* DCA . /except REW or FFG */ | |
03636, /* DCA I PTR /TAD I PTR mustn't change L */ | |
01205, /* TAD RDCOD /read op */ | |
06704, /* KLSA /load op */ | |
06706, /* KGOA /start */ | |
06701, /* LOOP, KSDF /data ready? */ | |
05216, /* JMP .-1 /loop */ | |
07002, /* BSW /to upper 6b */ | |
07430, /* SZL /second byte? */ | |
01636, /* TAD I PTR /yes */ | |
07022, /* CML BSW /swap back */ | |
03636, /* DCA I PTR /store in mem */ | |
07420, /* SNL /done with both bytes? */ | |
02236, /* ISZ PTR /yes, bump mem ptr */ | |
02235, /* ISZ KNT /done with record? */ | |
05215, /* JMP LOOP /next byte */ | |
07346, /* STA CLL RTL */ | |
07002, /* BSW /AC = 7757 */ | |
03235, /* STA KNT /now read 200 byte record */ | |
05201, /* JMP CRCCHK /go check CRC */ | |
07737, /* KNT, 7737 /1's compl of byte count */ | |
03557, /* PTR, 3557 /load point */ | |
07730, /* M50, 7730 /CLA SPA SZL */ | |
}; | |
t_stat ct_boot (int32 unitno, DEVICE *dptr) | |
{ | |
size_t i; | |
extern uint16 M[]; | |
if ((ct_dib.dev != DEV_CT) || unitno) /* only std devno */ | |
return STOP_NOTSTD; | |
for (i = 0; i < BOOT_LEN; i++) | |
M[BOOT_START + i] = boot_rom[i]; | |
cpu_set_bootpc (BOOT_START); | |
return SCPE_OK; | |
} |