Interdata/id_dp.c

/* id_dp.c: Interdata 2.5MB/10MB cartridge disk simulator

   Copyright (c) 2001-2003, Robert M. Supnik

   Permission is hereby granted, free of charge, to any person obtaining a
   copy of this software and associated documentation files (the "Software"),
   to deal in the Software without restriction, including without limitation
   the rights to use, copy, modify, merge, publish, distribute, sublicense,
   and/or sell copies of the Software, and to permit persons to whom the
   Software is furnished to do so, subject to the following conditions:

   The above copyright notice and this permission notice shall be included in
   all copies or substantial portions of the Software.

   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
   IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
   ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
   IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
   CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

   Except as contained in this notice, the name of Robert M Supnik shall not
   be used in advertising or otherwise to promote the sale, use or other dealings
   in this Software without prior written authorization from Robert M Supnik.

   dp		M46-421 2.5MB/10MB cartridge disk

   25-Apr-03	RMS	Revised for extended file support
   16-Feb-03	RMS	Fixed read to test transfer ok before selch operation
*/

#include "id_defs.h"
#include <math.h>

#define DP_NUMBY	256				/* bytes/sector */
#define DP_NUMSC	24				/* sectors/track */

#define UNIT_V_WLK	(UNIT_V_UF + 0)			/* write locked */
#define UNIT_V_DTYPE	(UNIT_V_UF + 1)			/* disk type */
#define UNIT_M_DTYPE	0x1
#define UNIT_V_AUTO	(UNIT_V_UF + 2)			/* autosize */
#define UNIT_WLK	(1 << UNIT_V_WLK)
#define UNIT_DTYPE	(UNIT_M_DTYPE << UNIT_V_DTYPE)
#define UNIT_AUTO	(1 << UNIT_V_AUTO)
#define GET_DTYPE(x)	(((x) >> UNIT_V_DTYPE) & UNIT_M_DTYPE)

#define CYL		u3				/* current cylinder */
#define STD		u4				/* drive status */
#define UNIT_WPRT	(UNIT_WLK | UNIT_RO)		/* write protect */

/* Controller status */

#define STC_OVR		0x80				/* overrun */
#define STC_ACF		0x40				/* addr cmp fail */
#define STC_DEF		0x20				/* def track NI */
#define STC_CYO		0x10				/* cylinder ovflo */
#define STC_IDL		0x02				/* ctrl idle */
#define STC_DTE		0x01				/* xfer error */
#define SETC_EX		(STC_OVR|STC_ACF|STC_DEF|STC_CYO)
#define STC_MASK	(STC_OVR|STC_ACF|STC_DEF|STC_CYO|STA_BSY|STC_IDL|STC_DTE)

/* Controller command */

#define CMC_MASK	0xF				
#define CMC_CLR		0x8				/* reset */
#define CMC_RD		0x1				/* read */
#define CMC_WR		0x2				/* write */
#define CMC_RCHK	0x3				/* read check */
#define CMC_RFMT	0x5				/* read fmt NI */
#define CMC_WFMT	0x6				/* write fmt NI */

/* Drive status, ^ = dynamic, * = in unit status */

#define STD_WRP		0x80				/* ^write prot */
#define STD_WCK		0x40				/* write check NI */
#define STD_ILA		0x20				/* *illegal addr */
#define STD_ILK		0x10				/* ^addr interlock */
#define STD_MOV		0x08				/* *heads in motion */
#define STD_INC		0x02				/* seek incomplete NI */
#define STD_NRDY	0x01				/* ^not ready */
#define STD_UST		(STD_ILA | STD_MOV)		/* set from unit */
#define SETD_EX		(STD_WCK | STD_ILA | STD_ILK)	/* set examine */

/* Drive command */

#define CMD_SK		0x02				/* seek */
#define CMD_RST		0x01				/* restore */

/* Head/sector register */

#define HS_SMASK	0x1F				/* sector mask */
#define HS_V_SRF	5				/* surface */
#define HS_HMASK	0x20				/* head mask */
#define HS_MASK		(HS_HMASK | HS_SMASK)
#define GET_SEC(x)	((x) & HS_SMASK)
#define GET_SRF(x)	(((x) & HS_HMASK) >> HS_V_SRF) 

#define GET_SA(p,cy,sf,sc,t) (((((((p)*drv_tab[t].cyl)+(cy))*drv_tab[t].surf)+(sf))* \
			DP_NUMSC)+(sc))
#define GET_ROTATE(x)	((int) fmod (sim_gtime() / ((double) (x)), \
			((double) DP_NUMSC)))

/* This controller supports two different disk drive types:

   type		#sectors/	#surfaces/	#cylinders/
		 surface	 cylinder	 drive

   2315		24		2		203
   5440		24		4		408

   In theory, each drive can be a different type.  The size field in
   each unit selects the drive capacity for each drive and thus the
   drive type.  DISKS MUST BE DECLARED IN ASCENDING SIZE AND MUST HAVE
   THE SAME SECTORS/TRACK.
*/

#define TYPE_2315	0
#define CYL_2315	203
#define SURF_2315	2
#define SIZE_2315	(DP_NUMSC * SURF_2315 * CYL_2315 * DP_NUMBY)

#define TYPE_5440	1
#define CYL_5440	408
#define SURF_5440	2
#define SIZE_5440	(2 * DP_NUMSC * SURF_5440 * CYL_5440 * DP_NUMBY)

struct drvtyp {
	int32	cyl;					/* cylinders */
	uint32	surf;					/* surfaces */
	uint32	size;					/* #blocks */
};

static struct drvtyp drv_tab[] = {
	{ CYL_2315, SURF_2315, SIZE_2315 },
	{ CYL_5440, SURF_5440, SIZE_5440 },
	{ 0 }  };

extern uint32 int_req[INTSZ], int_enb[INTSZ];
extern FILE *sim_log;

uint8 dpxb[DP_NUMBY];					/* xfer buffer */
uint32 dp_bptr = 0;					/* buffer ptr */
uint32 dp_db = 0;					/* ctrl buffer */
uint32 dp_cyl = 0;					/* drive buffer */
uint32 dp_sta = 0;					/* ctrl status */
uint32 dp_cmd = 0;					/* ctrl command */
uint32 dp_plat = 0;					/* platter */
uint32 dp_hdsc = 0;					/* head/sector */
uint32 dp_svun = 0;					/* most recent unit */
uint32 dp_1st = 0;					/* first byte */
uint32 dpd_arm[DP_NUMDR] = { 0 };			/* drives armed */
int32 dp_stime = 100;					/* seek latency */
int32 dp_rtime = 100;					/* rotate latency */
int32 dp_wtime = 1;					/* word time */
uint32 dp_log = 0;					/* debug log */
uint8 dp_tplte[(2 * DP_NUMDR) + 2];			/* fix/rmv + ctrl + end */

DEVICE dp_dev;
uint32 dp (uint32 dev, uint32 op, uint32 dat);
void dp_ini (t_bool dtpl);
t_stat dp_svc (UNIT *uptr);
t_stat dp_reset (DEVICE *dptr);
t_stat dp_attach (UNIT *uptr, char *cptr);
t_stat dp_detach (UNIT *uptr);
t_stat dp_set_size (UNIT *uptr, int32 val, char *cptr, void *desc);
t_stat dp_rds (UNIT *uptr);
t_stat dp_wds (UNIT *uptr);
t_bool dp_dter (UNIT *uptr, uint32 first);
void dp_done (uint32 flg);

extern t_stat id_dboot (int32 u, DEVICE *dptr);

/* DP data structures

   dp_dev	DP device descriptor
   dp_unit	DP unit list
   dp_reg	DP register list
   dp_mod	DP modifier list
*/

DIB dp_dib = { d_DPC, 0, v_DPC, dp_tplte, &dp, &dp_ini };

UNIT dp_unit[] = {
	{ UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
		UNIT_ROABLE+(TYPE_5440 << UNIT_V_DTYPE), SIZE_5440) },
	{ UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
		UNIT_ROABLE+(TYPE_5440 << UNIT_V_DTYPE), SIZE_5440) },
	{ UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
		UNIT_ROABLE+(TYPE_5440 << UNIT_V_DTYPE), SIZE_5440) },
	{ UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
		UNIT_ROABLE+(TYPE_5440 << UNIT_V_DTYPE), SIZE_5440) }  };

REG dp_reg[] = {
	{ HRDATA (CMD, dp_cmd, 3) },
	{ HRDATA (STA, dp_sta, 8) },
	{ HRDATA (BUF, dp_db, 8) },
	{ HRDATA (PLAT, dp_plat, 1) },
	{ HRDATA (HDSC, dp_hdsc, 6) },
	{ HRDATA (CYL, dp_cyl, 9) },
	{ HRDATA (SVUN, dp_svun, 8), REG_HIDDEN },
	{ BRDATA (DBUF, dpxb, 16, 8, DP_NUMBY) },
	{ HRDATA (DBPTR, dp_bptr, 9), REG_RO },
	{ FLDATA (FIRST, dp_1st, 0) },
	{ GRDATA (IREQ, int_req[l_DPC], 16, DP_NUMDR + 1, i_DPC) },
	{ GRDATA (IENB, int_enb[l_DPC], 16, DP_NUMDR + 1, i_DPC) },
	{ BRDATA (IARM, dpd_arm, 16, 1, DP_NUMDR) },
	{ DRDATA (RTIME, dp_rtime, 0), PV_LEFT | REG_NZ },
	{ DRDATA (STIME, dp_stime, 0), PV_LEFT | REG_NZ },
	{ DRDATA (WTIME, dp_wtime, 0), PV_LEFT | REG_NZ },
	{ URDATA (UCYL, dp_unit[0].CYL, 16, 9, 0,
		  DP_NUMDR, REG_RO) },
	{ URDATA (UST, dp_unit[0].STD, 16, 8, 0,
		  DP_NUMDR, REG_RO) },
	{ URDATA (CAPAC, dp_unit[0].capac, 10, T_ADDR_W, 0,
		  DP_NUMDR, PV_LEFT | REG_HRO) },
	{ FLDATA (LOG, dp_log, 0), REG_HIDDEN },
	{ HRDATA (DEVNO, dp_dib.dno, 8), REG_HRO },
	{ HRDATA (SELCH, dp_dib.sch, 2), REG_HRO },
	{ NULL }  };

MTAB dp_mod[] = {
	{ UNIT_WLK, 0, "write enabled", "WRITEENABLED", NULL },
	{ UNIT_WLK, UNIT_WLK, "write locked", "LOCKED", NULL },
	{ (UNIT_DTYPE+UNIT_ATT), (TYPE_2315 << UNIT_V_DTYPE) + UNIT_ATT,
		"2315", NULL, NULL },
	{ (UNIT_DTYPE+UNIT_ATT), (TYPE_5440 << UNIT_V_DTYPE) + UNIT_ATT,
		"5440", NULL, NULL },
	{ (UNIT_AUTO+UNIT_DTYPE+UNIT_ATT), (TYPE_2315 << UNIT_V_DTYPE),
		"2315", NULL, NULL },
	{ (UNIT_AUTO+UNIT_DTYPE+UNIT_ATT), (TYPE_5440 << UNIT_V_DTYPE),
 		"5440", NULL, NULL },
	{ (UNIT_AUTO+UNIT_ATT), UNIT_AUTO, "autosize", NULL, NULL },
	{ UNIT_AUTO, UNIT_AUTO, NULL, "AUTOSIZE", NULL },
	{ (UNIT_AUTO+UNIT_DTYPE), (TYPE_2315 << UNIT_V_DTYPE),
		NULL, "2315", &dp_set_size }, 
 	{ (UNIT_AUTO+UNIT_DTYPE), (TYPE_5440 << UNIT_V_DTYPE),
		NULL, "5440", &dp_set_size },
	{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO",
		&set_dev, &show_dev, NULL },
	{ MTAB_XTD|MTAB_VDV, 0, "SELCH", "SELCH",
		&set_sch, &show_sch, NULL },
	{ 0 }  };

DEVICE dp_dev = {
	"DP", dp_unit, dp_reg, dp_mod,
	DP_NUMDR, 16, 24, 1, 16, 8,
	NULL, NULL, &dp_reset,
	&id_dboot, &dp_attach, &dp_detach,
	&dp_dib, DEV_DISABLE };

/* Controller: IO routine */

uint32 dpc (uint32 dev, uint32 op, uint32 dat)
{
uint32 f, t, u;
UNIT *uptr;
static uint8 good_cmd[8] = { 0, 1, 1, 1, 0, 0, 0, 0 };

switch (op) {						/* case IO op */
case IO_ADR:						/* select */
	sch_adr (dp_dib.sch, dev);			/* inform sel ch */
	return BY;					/* byte only */
case IO_RD:						/* read data */
	if (dp_sta & STC_IDL)				/* if idle */
	    return GET_ROTATE (dp_rtime);		/* return sector */
	else dp_sta = dp_sta | STA_BSY;			/* xfr? set busy */
	return dp_db;					/* return data */
case IO_WD:						/* write data */
	if (sim_log && dp_log) fprintf (sim_log,
	    ">>DPC WD = %02X, STA = %02X\n", dat, dp_sta);
	if (dp_sta & STC_IDL) dp_hdsc = dat & HS_MASK;	/* idle? hdsc */
	else {						/* data xfer */
	    dp_sta = dp_sta | STA_BSY;			/* set busy */
	    dp_db = dat & 0xFF;  }			/* store data */
	break;
case IO_SS:						/* status */
	t = dp_sta & STC_MASK;				/* get status */
	if (t & SETC_EX) t = t | STA_EX;		/* test for EX */
	return t;
case IO_OC:						/* command */
	if (sim_log && dp_log) fprintf (sim_log,
	    ">>DPC OC = %02X, STA = %02X\n", dat, dp_sta);
	f = dat & CMC_MASK;				/* get cmd */
	if (f & CMC_CLR) {				/* clear? */
	    dp_reset (&dp_dev);				/* reset world */
	    break;  }
	u = (dp_svun - dp_dib.dno - o_DP0) / o_DP0;	/* get unit */
	uptr = dp_dev.units + u;			/* ignore if busy */
	if (!(dp_sta & STC_IDL) || sim_is_active (uptr)) break;
	dp_cmd = f;					/* save cmd */
	if (dp_cmd == CMC_WR) dp_sta = 0;		/* write: bsy=0 else */
	else dp_sta = STA_BSY;				/* bsy=1,idl,err=0 */
	dp_1st = 1;					/* xfr not started */
	dp_bptr = 0;					/* buffer empty */
	if (dp_svun & o_DPF) dp_plat = 1;		/* upper platter? */
	else dp_plat = 0;				/* no, lower */
	if (good_cmd[f]) sim_activate (uptr, dp_rtime);	/* legal? sched */
	break;  }
return 0;
}

/* Drives: IO routine */

uint32 dp (uint32 dev, uint32 op, uint32 dat)
{
int32 diff;
uint32 t, u;
UNIT *uptr;

if (dev == dp_dib.dno) return dpc (dev, op, dat);	/* controller? */
u = (dev - dp_dib.dno - o_DP0) / o_DP0;			/* get unit num */
uptr = dp_dev.units + u;				/* get unit ptr */
switch (op) {						/* case IO op */
case IO_ADR:						/* select */
	if (dp_sta & STC_IDL) dp_svun = dev;		/* idle? save unit */
	return BY;					/* byte only */
case IO_WD:						/* write data */
	if (sim_log && dp_log) fprintf (sim_log,
	    ">>DP%d WD = %02X, STA = %02X\n", u, dat, dp_sta);
	if (GET_DTYPE (uptr->flags) == TYPE_2315)	/* 2.5MB drive? */
	    dp_cyl = dat & 0xFF;			/* cyl is 8b */
	else dp_cyl = ((dp_cyl << 8) | dat) & DMASK16;	/* insert byte */
	break;
case IO_SS:						/* status */
	if (uptr->flags & UNIT_ATT) t =			/* onl? */
	    ((uptr->flags & UNIT_WPRT)? STD_WRP: 0) |
	    ((dp_sta & STC_IDL)? 0: STD_ILK) |
	    (uptr->STD & STD_UST);
	else t = STD_MOV | STD_NRDY;			/* off = X'09' */
	if (t & SETD_EX) t = t | STA_EX;		/* test for ex */
	return t;
case IO_OC:						/* command */
	if (sim_log && dp_log) fprintf (sim_log,
	    ">>DP%d OC = %02X, STA = %02X\n", u, dat, dp_sta);
	dpd_arm[u] = int_chg (v_DPC + u + 1, dat, dpd_arm[u]);
	if (dat & CMD_SK) t = dp_cyl;			/* seek? get cyl */
	else if (dat & CMD_RST) t = 0;			/* rest? cyl 0 */
	else break;					/* no action */
	diff = t - uptr->CYL;
	if (diff < 0) diff = -diff;			/* ABS cyl diff */
	else if (diff == 0) diff = 1;			/* must be nz */
	uptr->STD = STD_MOV;				/* stat = moving */
	uptr->CYL = t;					/* put on cyl */
	sim_activate (uptr, diff * dp_stime);		/* schedule */
	break;  }
return 0;
}

/* Unit service

   If seek done, on cylinder;
   if read check, signal completion;
   else, do read or write
*/

t_stat dp_svc (UNIT *uptr)
{
uint32 u = uptr - dp_dev.units;				/* get unit number */
int32 cyl = uptr->CYL;					/* get cylinder */
uint32 dtype = GET_DTYPE (uptr->flags);			/* get drive type */
uint32 t;
t_stat r;

if (uptr->STD & STD_MOV) {				/* seek? */
	uptr->STD = 0;					/* clr seek in prog */
	if ((uptr->flags & UNIT_ATT) == 0) return SCPE_OK;	/* offl? hangs */
	if (cyl >= drv_tab[dtype].cyl) {		/* bad cylinder? */
	    uptr->STD = STD_ILA;			/* error */
	    uptr->CYL = drv_tab[dtype].cyl - 1;  }	/* put at edge */
	if (dpd_arm[u]) SET_INT (v_DPC + u + 1);	/* req intr */
	return SCPE_OK;  }

switch (dp_cmd & 0x7) {					/* case on func */

case CMC_RCHK:						/* read check */
	dp_dter (uptr, 1);				/* check xfr err */
	break;

case CMC_RD:						/* read */
	if (sch_actv (dp_dib.sch, dp_dib.dno)) {	/* sch transfer? */
	    if (dp_dter (uptr, dp_1st)) return SCPE_OK;	/* check xfr err */
	    if (r = dp_rds (uptr)) return r;		/* read sec, err? */
	    dp_1st = 0;
	    t = sch_wrmem (dp_dib.sch, dpxb, DP_NUMBY);	/* write to memory */
	    if (sch_actv (dp_dib.sch, dp_dib.dno)) {	/* more to do? */	
		sim_activate (uptr, dp_rtime);		/* reschedule */
		return SCPE_OK;  }
	break;  }					/* no, set done */
 
	dp_sta = dp_sta | STC_DTE;			/* can't work */
	break;

case CMC_WR:						/* write */
	if (sch_actv (dp_dib.sch, dp_dib.dno)) {	/* sch transfer? */
	    if (dp_dter (uptr, dp_1st)) return SCPE_OK;	/* check xfr err */
	    dp_bptr = sch_rdmem (dp_dib.sch, dpxb, DP_NUMBY); /* read from mem */
	    dp_db = dpxb[dp_bptr - 1];			/* last byte */
	    if (r = dp_wds (uptr)) return r;		/* write sec, err? */
	    dp_1st = 0;
	    if (sch_actv (dp_dib.sch, dp_dib.dno)) {	/* more to do? */	
		sim_activate (uptr, dp_rtime);		/* reschedule */
		return SCPE_OK;  }
	break;  }					/* no, set done */

	dp_sta = dp_sta | STC_DTE;			/* can't work */
	break;  }

dp_done (0);						/* done */
return SCPE_OK;
}

/* Read data sector */

t_stat dp_rds (UNIT *uptr)
{
uint32 i;

i = fxread (dpxb, sizeof (uint8), DP_NUMBY, uptr->fileref);
for ( ; i < DP_NUMBY; i++) dpxb[i] = 0;			/* fill with 0's */
if (ferror (uptr->fileref)) {				/* error? */
	perror ("DP I/O error");
	clearerr (uptr->fileref);
	dp_done (STC_DTE);
	return SCPE_IOERR;  }
return SCPE_OK;
}

/* Write data sector */

t_stat dp_wds (UNIT *uptr)
{
for ( ; dp_bptr < DP_NUMBY; dp_bptr++)
	dpxb[dp_bptr] = dp_db;				/* fill with last */
fxwrite (dpxb, sizeof (uint8), DP_NUMBY, uptr->fileref);
if (ferror (uptr->fileref)) {				/* error? */
	perror ("DP I/O error");
	clearerr (uptr->fileref);
	dp_done (STC_DTE);
	return SCPE_IOERR;  }
return SCPE_OK;
}

/* Data transfer error test routine */

t_bool dp_dter (UNIT *uptr, uint32 first)
{
uint32 hd, sc, sa;
uint32 dtype = GET_DTYPE (uptr->flags);			/* get drive type */

if (((uptr->flags & UNIT_ATT) == 0) ||			/* not attached? */
    ((uptr->flags & UNIT_WPRT) && (dp_cmd == CMC_WR))) {
	dp_done (STC_DTE);				/* error, done */
	return TRUE;  }
hd = GET_SRF (dp_hdsc);					/* get head */
sc = GET_SEC (dp_hdsc);					/* get sector */
if (dp_cyl != (uint32) uptr->CYL) {			/* wrong cylinder? */
	if (dp_cyl == 0) uptr->CYL = 0;
	else {
	    dp_done (STC_ACF);				/* error, done */
	    return TRUE;  }  }
if (sc >= DP_NUMSC) {					/* bad sector? */
	dp_done (STC_OVR);				/* error, done */
	return TRUE;  }
if (!first && (sc == 0) && (hd == 0)) {			/* cyl overflow? */
	dp_done (STC_CYO);				/* error, done */
	return TRUE;  }
sa = GET_SA (dp_plat, uptr->CYL, hd, sc, dtype);	/* curr disk addr */
fseek (uptr->fileref, sa * DP_NUMBY, SEEK_SET);
if ((sc + 1) < DP_NUMSC) dp_hdsc = dp_hdsc + 1;		/* end of track? */
else dp_hdsc = (dp_hdsc ^ HS_HMASK) & HS_HMASK;		/* sec 0, nxt srf */
return FALSE;
}

/* Data transfer done routine */

void dp_done (uint32 flg)
{
dp_sta = (dp_sta | STC_IDL | flg) & ~STA_BSY;		/* set flag, idle */
SET_INT (v_DPC);					/* unmaskable intr */
if (flg) sch_stop (dp_dib.sch);				/* if err, stop ch */
return;
}

/* Reset routine */

t_stat dp_reset (DEVICE *dptr)
{
uint32 u;
UNIT *uptr;

dp_cmd = 0;						/* clear cmd */
dp_sta = STA_BSY | STC_IDL;				/* idle, busy */
dp_1st = 0;						/* clear flag */
dp_svun = dp_db = 0;					/* clear unit, buf */
dp_plat = 0;
dp_hdsc = 0;						/* clear addr */
CLR_INT (v_DPC);					/* clear ctrl int */
SET_ENB (v_DPC);					/* always enabled */
for (u = 0; u < DP_NUMDR; u++) {			/* loop thru units */
	uptr = dp_dev.units + u;
	uptr->CYL = uptr->STD = 0;
	CLR_INT (v_DPC + u + 1);			/* clear intr */
	CLR_ENB (v_DPC + u + 1);			/* clear enable */
	dpd_arm[u] = 0;					/* clear arm */
	sim_cancel (uptr);  }				/* cancel activity */
return SCPE_OK;
}

/* Attach routine (with optional autosizing) */

t_stat dp_attach (UNIT *uptr, char *cptr)
{
uint32 i, p;
t_stat r;

uptr->capac = drv_tab[GET_DTYPE (uptr->flags)].size;
r = attach_unit (uptr, cptr);				/* attach unit */
if (r != SCPE_OK) return r;				/* error? */
uptr->CYL = 0;
if ((uptr->flags & UNIT_AUTO) == 0) return SCPE_OK;	/* autosize? */
if (fseek (uptr->fileref, 0, SEEK_END)) return SCPE_OK;
if ((p = ftell (uptr->fileref)) == 0) return SCPE_OK;
for (i = 0; drv_tab[i].surf != 0; i++) {
    if (p <= drv_tab[i].size) {
	uptr->flags = (uptr->flags & ~UNIT_DTYPE) | (i << UNIT_V_DTYPE);
	uptr->capac = drv_tab[i].size;
	return SCPE_OK;  }  }
return SCPE_OK;
}

/* Detach routine (generates an interrupt) */

t_stat dp_detach (UNIT *uptr)
{
uint32 u = uptr - dp_dev.units;

if (dpd_arm[u]) SET_INT (v_DPC + u + 1);		/* if arm, intr */
return detach_unit (uptr);
}

/* Set size command validation routine */

t_stat dp_set_size (UNIT *uptr, int32 val, char *cptr, void *desc)
{
if (uptr->flags & UNIT_ATT) return SCPE_ALATT;
uptr->capac = drv_tab[GET_DTYPE (val)].size;
return SCPE_OK;
}

/* Create device number (T) or interrupt (F) template */

void dp_ini (t_bool dtpl)
{
int32 u, j, dev;

dp_tplte[0] = 0;					/* controller */
for (u = 0, j = 1; u < DP_NUMDR; u++) {			/* loop thru units */
	dev = (u + 1) * o_DP0;				/* drive dev # */
	dp_tplte[j++] = dev;
	if (dtpl && (GET_DTYPE (dp_unit[u].flags) == TYPE_5440)) 
	    dp_tplte[j++] = dev + o_DPF;  }		/* if fixed */
dp_tplte[j] = TPL_END;					/* end marker */
return;
}