| /* pdp11_dl.c: PDP-11 multiple terminal interface simulator | |
| Copyright (c) 1993-2012, Robert M Supnik | |
| Permission is hereby granted, free of charge, to any person obtaining a | |
| copy of this software and associated documentation files (the "Software"), | |
| to deal in the Software without restriction, including without limitation | |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| and/or sell copies of the Software, and to permit persons to whom the | |
| Software is furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be included in | |
| all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| Except as contained in this notice, the name of Robert M Supnik shall not be | |
| used in advertising or otherwise to promote the sale, use or other dealings | |
| in this Software without prior written authorization from Robert M Supnik. | |
| dli,dlo DL11 terminal input/output | |
| 18-Apr-2012 RMS Modified to use clock coscheduling | |
| 17-Aug-2011 RMS Added AUTOCONFIGURE modifier | |
| 19-Nov-2008 RMS Revised for common TMXR show routines | |
| Revised to autoconfigure vectors | |
| 20-May-2008 RMS Added modem control support | |
| */ | |
| #if defined (VM_PDP10) /* PDP10 version */ | |
| #error "DL11 is not supported on the PDP-10!" | |
| #elif defined (VM_VAX) /* VAX version */ | |
| #error "DL11 is not supported on the VAX!" | |
| #else /* PDP-11 version */ | |
| #include "pdp11_defs.h" | |
| #endif | |
| #include "sim_sock.h" | |
| #include "sim_tmxr.h" | |
| #define DLX_MASK (DLX_LINES - 1) | |
| #define DLI_RCI 0 /* rcv ints */ | |
| #define DLI_DSI 1 /* dset ints */ | |
| /* Modem control */ | |
| #define DLX_V_MDM (TTUF_V_UF + 0) | |
| #define DLX_MDM (1u << DLX_V_MDM) | |
| /* registers */ | |
| #define DLICSR_DSI 0100000 /* dataset int, RO */ | |
| #define DLICSR_RNG 0040000 /* ring, RO */ | |
| #define DLICSR_CTS 0020000 /* CTS, RO */ | |
| #define DLICSR_CDT 0010000 /* CDT, RO */ | |
| #define DLICSR_SEC 0002000 /* sec rcv, RONI */ | |
| #define DLICSR_DSIE 0000040 /* DSI ie, RW */ | |
| #define DLICSR_SECX 0000010 /* sec xmt, RWNI */ | |
| #define DLICSR_RTS 0000004 /* RTS, RW */ | |
| #define DLICSR_DTR 0000002 /* DTR, RW */ | |
| #define DLICSR_RD (CSR_DONE|CSR_IE) /* DL11C */ | |
| #define DLICSR_WR (CSR_IE) | |
| #define DLICSR_RD_M (DLICSR_DSI|DLICSR_RNG|DLICSR_CTS|DLICSR_CDT|DLICSR_SEC| \ | |
| CSR_DONE|CSR_IE|DLICSR_DSIE|DLICSR_SECX|DLICSR_RTS|DLICSR_DTR) | |
| #define DLICSR_WR_M (CSR_IE|DLICSR_DSIE|DLICSR_SECX|DLICSR_RTS|DLICSR_DTR) | |
| #define DLIBUF_ERR 0100000 | |
| #define DLIBUF_OVR 0040000 | |
| #define DLIBUF_RBRK 0020000 | |
| #define DLIBUF_RD (DLIBUF_ERR|DLIBUF_OVR|DLIBUF_RBRK|0377) | |
| #define DLOCSR_MNT 0000004 /* maint, RWNI */ | |
| #define DLOCSR_XBR 0000001 /* xmit brk, RWNI */ | |
| #define DLOCSR_RD (CSR_DONE|CSR_IE|DLOCSR_MNT|DLOCSR_XBR) | |
| #define DLOCSR_WR (CSR_IE|DLOCSR_MNT|DLOCSR_XBR) | |
| extern int32 int_req[IPL_HLVL]; | |
| extern int32 tmxr_poll; | |
| uint16 dli_csr[DLX_LINES] = { 0 }; /* control/status */ | |
| uint16 dli_buf[DLX_LINES] = { 0 }; | |
| uint32 dli_ireq[2] = { 0, 0}; | |
| uint16 dlo_csr[DLX_LINES] = { 0 }; /* control/status */ | |
| uint8 dlo_buf[DLX_LINES] = { 0 }; | |
| uint32 dlo_ireq = 0; | |
| TMLN dlx_ldsc[DLX_LINES] = { {0} }; /* line descriptors */ | |
| TMXR dlx_desc = { DLX_LINES, 0, 0, dlx_ldsc }; /* mux descriptor */ | |
| t_stat dlx_rd (int32 *data, int32 PA, int32 access); | |
| t_stat dlx_wr (int32 data, int32 PA, int32 access); | |
| t_stat dlx_reset (DEVICE *dptr); | |
| t_stat dli_svc (UNIT *uptr); | |
| t_stat dlo_svc (UNIT *uptr); | |
| t_stat dlx_attach (UNIT *uptr, char *cptr); | |
| t_stat dlx_detach (UNIT *uptr); | |
| t_stat dlx_set_lines (UNIT *uptr, int32 val, char *cptr, void *desc); | |
| void dlx_enbdis (int32 dis); | |
| void dli_clr_int (int32 ln, uint32 wd); | |
| void dli_set_int (int32 ln, uint32 wd); | |
| int32 dli_iack (void); | |
| void dlo_clr_int (int32 ln); | |
| void dlo_set_int (int32 ln); | |
| int32 dlo_iack (void); | |
| void dlx_reset_ln (int32 ln); | |
| /* DLI data structures | |
| dli_dev DLI device descriptor | |
| dli_unit DLI unit descriptor | |
| dli_reg DLI register list | |
| */ | |
| DIB dli_dib = { | |
| IOBA_DL, IOLN_DL, &dlx_rd, &dlx_wr, | |
| 2, IVCL (DLI), VEC_DLI, { &dli_iack, &dlo_iack } | |
| }; | |
| UNIT dli_unit = { UDATA (&dli_svc, 0, 0), KBD_POLL_WAIT }; | |
| REG dli_reg[] = { | |
| { BRDATA (BUF, dli_buf, DEV_RDX, 16, DLX_LINES) }, | |
| { BRDATA (CSR, dli_csr, DEV_RDX, 16, DLX_LINES) }, | |
| { GRDATA (IREQ, dli_ireq[DLI_RCI], DEV_RDX, DLX_LINES, 0) }, | |
| { GRDATA (DSI, dli_ireq[DLI_DSI], DEV_RDX, DLX_LINES, 0) }, | |
| { DRDATA (LINES, dlx_desc.lines, 6), REG_HRO }, | |
| { GRDATA (DEVADDR, dli_dib.ba, DEV_RDX, 32, 0), REG_HRO }, | |
| { GRDATA (DEVIOLN, dli_dib.lnt, DEV_RDX, 32, 0), REG_HRO }, | |
| { GRDATA (DEVVEC, dli_dib.vec, DEV_RDX, 16, 0), REG_HRO }, | |
| { NULL } | |
| }; | |
| MTAB dli_mod[] = { | |
| { MTAB_XTD | MTAB_VDV, 1, NULL, "DISCONNECT", | |
| &tmxr_dscln, NULL, &dlx_desc }, | |
| { UNIT_ATT, UNIT_ATT, "summary", NULL, | |
| NULL, &tmxr_show_summ, (void *) &dlx_desc }, | |
| { MTAB_XTD | MTAB_VDV | MTAB_NMO, 1, "CONNECTIONS", NULL, | |
| NULL, &tmxr_show_cstat, (void *) &dlx_desc }, | |
| { MTAB_XTD | MTAB_VDV | MTAB_NMO, 0, "STATISTICS", NULL, | |
| NULL, &tmxr_show_cstat, (void *) &dlx_desc }, | |
| { MTAB_XTD|MTAB_VDV, 0, "ADDRESS", NULL, | |
| &set_addr, &show_addr, NULL }, | |
| { MTAB_XTD | MTAB_VDV, 0, NULL, "AUTOCONFIGURE", | |
| &set_addr_flt, NULL, NULL }, | |
| { MTAB_XTD|MTAB_VDV, 1, "VECTOR", NULL, | |
| &set_vec, &show_vec_mux, (void *) &dlx_desc }, | |
| { MTAB_XTD | MTAB_VDV, 0, "LINES", "LINES", | |
| &dlx_set_lines, &tmxr_show_lines, (void *) &dlx_desc }, | |
| { 0 } | |
| }; | |
| DEVICE dli_dev = { | |
| "DLI", &dli_unit, dli_reg, dli_mod, | |
| 1, 10, 31, 1, 8, 8, | |
| NULL, NULL, &dlx_reset, | |
| NULL, &dlx_attach, &dlx_detach, | |
| &dli_dib, DEV_FLTA | DEV_UBUS | DEV_QBUS | DEV_DISABLE | DEV_DIS | |
| }; | |
| /* DLO data structures | |
| dlo_dev DLO device descriptor | |
| dlo_unit DLO unit descriptor | |
| dlo_reg DLO register list | |
| */ | |
| UNIT dlo_unit[] = { | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT }, | |
| { UDATA (&dlo_svc, TT_MODE_UC, 0), SERIAL_OUT_WAIT } | |
| }; | |
| REG dlo_reg[] = { | |
| { BRDATA (BUF, dlo_buf, DEV_RDX, 8, DLX_LINES) }, | |
| { BRDATA (CSR, dlo_csr, DEV_RDX, 16, DLX_LINES) }, | |
| { GRDATA (IREQ, dlo_ireq, DEV_RDX, DLX_LINES, 0) }, | |
| { URDATA (TIME, dlo_unit[0].wait, 10, 31, 0, | |
| DLX_LINES, PV_LEFT) }, | |
| { NULL } | |
| }; | |
| MTAB dlo_mod[] = { | |
| { TT_MODE, TT_MODE_UC, "UC", "UC", NULL }, | |
| { TT_MODE, TT_MODE_7B, "7b", "7B", NULL }, | |
| { TT_MODE, TT_MODE_8B, "8b", "8B", NULL }, | |
| { TT_MODE, TT_MODE_7P, "7p", "7P", NULL }, | |
| { DLX_MDM, 0, "no dataset", "NODATASET", NULL }, | |
| { DLX_MDM, DLX_MDM, "dataset", "DATASET", NULL }, | |
| { MTAB_XTD|MTAB_VUN, 0, NULL, "DISCONNECT", | |
| &tmxr_dscln, NULL, &dlx_desc }, | |
| { MTAB_XTD|MTAB_VUN|MTAB_NC, 0, "LOG", "LOG", | |
| &tmxr_set_log, &tmxr_show_log, &dlx_desc }, | |
| { MTAB_XTD|MTAB_VUN|MTAB_NC, 0, NULL, "NOLOG", | |
| &tmxr_set_nolog, NULL, &dlx_desc }, | |
| { 0 } | |
| }; | |
| DEVICE dlo_dev = { | |
| "DLO", dlo_unit, dlo_reg, dlo_mod, | |
| DLX_LINES, 10, 31, 1, 8, 8, | |
| NULL, NULL, &dlx_reset, | |
| NULL, NULL, NULL, | |
| NULL, DEV_UBUS | DEV_QBUS | DEV_DISABLE | DEV_DIS | |
| }; | |
| /* Terminal input routines */ | |
| t_stat dlx_rd (int32 *data, int32 PA, int32 access) | |
| { | |
| int32 ln = ((PA - dli_dib.ba) >> 3) & DLX_MASK; | |
| switch ((PA >> 1) & 03) { /* decode PA<2:1> */ | |
| case 00: /* tti csr */ | |
| *data = dli_csr[ln] & | |
| ((dlo_unit[ln].flags & DLX_MDM)? DLICSR_RD_M: DLICSR_RD); | |
| dli_csr[ln] &= ~DLICSR_DSI; /* clr DSI flag */ | |
| dli_clr_int (ln, DLI_DSI); /* clr dset int req */ | |
| return SCPE_OK; | |
| case 01: /* tti buf */ | |
| *data = dli_buf[ln] & DLIBUF_RD; | |
| dli_csr[ln] &= ~CSR_DONE; /* clr rcv done */ | |
| dli_clr_int (ln, DLI_RCI); /* clr rcv int req */ | |
| return SCPE_OK; | |
| case 02: /* tto csr */ | |
| *data = dlo_csr[ln] & DLOCSR_RD; | |
| return SCPE_OK; | |
| case 03: /* tto buf */ | |
| *data = dlo_buf[ln]; | |
| return SCPE_OK; | |
| } /* end switch PA */ | |
| return SCPE_NXM; | |
| } | |
| t_stat dlx_wr (int32 data, int32 PA, int32 access) | |
| { | |
| int32 ln = ((PA - dli_dib.ba) >> 3) & DLX_MASK; | |
| TMLN *lp = &dlx_ldsc[ln]; | |
| switch ((PA >> 1) & 03) { /* decode PA<2:1> */ | |
| case 00: /* tti csr */ | |
| if (PA & 1) /* odd byte RO */ | |
| return SCPE_OK; | |
| if ((data & CSR_IE) == 0) | |
| dli_clr_int (ln, DLI_RCI); | |
| else if ((dli_csr[ln] & (CSR_DONE + CSR_IE)) == CSR_DONE) | |
| dli_set_int (ln, DLI_RCI); | |
| if (dlo_unit[ln].flags & DLX_MDM) { /* modem control */ | |
| if ((data & DLICSR_DSIE) == 0) | |
| dli_clr_int (ln, DLI_DSI); | |
| else if ((dli_csr[ln] & (DLICSR_DSI|DLICSR_DSIE)) == DLICSR_DSI) | |
| dli_set_int (ln, DLI_DSI); | |
| if ((data ^ dli_csr[ln]) & DLICSR_DTR) { /* DTR change? */ | |
| if ((data & DLICSR_DTR) && lp->conn) { /* setting DTR? */ | |
| dli_csr[ln] = (dli_csr[ln] & ~DLICSR_RNG) | | |
| (DLICSR_CDT|DLICSR_CTS|DLICSR_DSI); | |
| if (data & DLICSR_DSIE) /* if ie, req int */ | |
| dli_set_int (ln, DLI_DSI); | |
| } /* end DTR 0->1 + ring */ | |
| else { /* clearing DTR */ | |
| if (lp->conn) { /* connected? */ | |
| tmxr_linemsg (lp, "\r\nLine hangup\r\n"); | |
| tmxr_reset_ln (lp); /* reset line */ | |
| if (dli_csr[ln] & DLICSR_CDT) { /* carrier det? */ | |
| dli_csr[ln] |= DLICSR_DSI; | |
| if (data & DLICSR_DSIE) /* if ie, req int */ | |
| dli_set_int (ln, DLI_DSI); | |
| } | |
| } | |
| dli_csr[ln] &= ~(DLICSR_CDT|DLICSR_RNG|DLICSR_CTS); | |
| /* clr CDT,RNG,CTS */ | |
| } /* end DTR 1->0 */ | |
| } /* end DTR chg */ | |
| dli_csr[ln] = (uint16) ((dli_csr[ln] & ~DLICSR_WR_M) | (data & DLICSR_WR_M)); | |
| } /* end modem */ | |
| dli_csr[ln] = (uint16) ((dli_csr[ln] & ~DLICSR_WR) | (data & DLICSR_WR)); | |
| return SCPE_OK; | |
| case 01: /* tti buf */ | |
| return SCPE_OK; | |
| case 02: /* tto csr */ | |
| if (PA & 1) | |
| return SCPE_OK; | |
| if ((data & CSR_IE) == 0) | |
| dlo_clr_int (ln); | |
| else if ((dlo_csr[ln] & (CSR_DONE + CSR_IE)) == CSR_DONE) | |
| dlo_set_int (ln); | |
| dlo_csr[ln] = (uint16) ((dlo_csr[ln] & ~DLOCSR_WR) | (data & DLOCSR_WR)); | |
| return SCPE_OK; | |
| case 03: /* tto buf */ | |
| if ((PA & 1) == 0) | |
| dlo_buf[ln] = data & 0377; | |
| dlo_csr[ln] &= ~CSR_DONE; | |
| dlo_clr_int (ln); | |
| sim_activate (&dlo_unit[ln], dlo_unit[ln].wait); | |
| return SCPE_OK; | |
| } /* end switch PA */ | |
| return SCPE_NXM; | |
| } | |
| /* Terminal input service */ | |
| t_stat dli_svc (UNIT *uptr) | |
| { | |
| int32 ln, c, temp; | |
| if ((uptr->flags & UNIT_ATT) == 0) /* attached? */ | |
| return SCPE_OK; | |
| sim_activate (uptr, clk_cosched (tmxr_poll)); /* continue poll */ | |
| ln = tmxr_poll_conn (&dlx_desc); /* look for connect */ | |
| if (ln >= 0) { /* got one? rcv enb */ | |
| dlx_ldsc[ln].rcve = 1; | |
| if (dlo_unit[ln].flags & DLX_MDM) { /* modem control? */ | |
| if (dli_csr[ln] & DLICSR_DTR) /* DTR already set? */ | |
| dli_csr[ln] |= (DLICSR_CDT|DLICSR_CTS|DLICSR_DSI); | |
| else dli_csr[ln] |= (DLICSR_RNG|DLICSR_DSI); /* no, ring */ | |
| if (dli_csr[ln] & DLICSR_DSIE) /* if ie, */ | |
| dli_set_int (ln, DLI_DSI); /* req int */ | |
| } /* end modem */ | |
| } /* end new conn */ | |
| tmxr_poll_rx (&dlx_desc); /* poll for input */ | |
| for (ln = 0; ln < DLX_LINES; ln++) { /* loop thru lines */ | |
| if (dlx_ldsc[ln].conn) { /* connected? */ | |
| if ((temp = tmxr_getc_ln (&dlx_ldsc[ln]))) { /* get char */ | |
| if (temp & SCPE_BREAK) /* break? */ | |
| c = DLIBUF_ERR|DLIBUF_RBRK; | |
| else c = sim_tt_inpcvt (temp, TT_GET_MODE (dlo_unit[ln].flags)); | |
| if (dli_csr[ln] & CSR_DONE) | |
| c |= DLIBUF_ERR|DLIBUF_OVR; | |
| else dli_csr[ln] |= CSR_DONE; | |
| if (dli_csr[ln] & CSR_IE) | |
| dli_set_int (ln, DLI_RCI); | |
| dli_buf[ln] = c; | |
| } | |
| } | |
| else if (dlo_unit[ln].flags & DLX_MDM) { /* discpnn & modem? */ | |
| if (dli_csr[ln] & DLICSR_CDT) { /* carrier detect? */ | |
| dli_csr[ln] |= DLICSR_DSI; /* dataset change */ | |
| if (dli_csr[ln] & DLICSR_DSIE) /* if ie, */ | |
| dli_set_int (ln, DLI_DSI); /* req int */ | |
| } | |
| dli_csr[ln] &= ~(DLICSR_CDT|DLICSR_RNG|DLICSR_CTS); | |
| /* clr CDT,RNG,CTS */ | |
| } | |
| } | |
| return SCPE_OK; | |
| } | |
| /* Terminal output service */ | |
| t_stat dlo_svc (UNIT *uptr) | |
| { | |
| int32 c; | |
| int32 ln = uptr - dlo_unit; /* line # */ | |
| if (dlx_ldsc[ln].conn) { /* connected? */ | |
| if (dlx_ldsc[ln].xmte) { /* tx enabled? */ | |
| TMLN *lp = &dlx_ldsc[ln]; /* get line */ | |
| c = sim_tt_outcvt (dlo_buf[ln], TT_GET_MODE (dlo_unit[ln].flags)); | |
| if (c >= 0) /* output char */ | |
| tmxr_putc_ln (lp, c); | |
| tmxr_poll_tx (&dlx_desc); /* poll xmt */ | |
| } | |
| else { | |
| tmxr_poll_tx (&dlx_desc); /* poll xmt */ | |
| sim_activate (uptr, dlo_unit[ln].wait); /* wait */ | |
| return SCPE_OK; | |
| } | |
| } | |
| dlo_csr[ln] |= CSR_DONE; /* set done */ | |
| if (dlo_csr[ln] & CSR_IE) | |
| dlo_set_int (ln); | |
| return SCPE_OK; | |
| } | |
| /* Interrupt routines */ | |
| void dli_clr_int (int32 ln, uint32 wd) | |
| { | |
| dli_ireq[wd] &= ~(1 << ln); /* clr rcv/dset int */ | |
| if ((dli_ireq[DLI_RCI] | dli_ireq[DLI_DSI]) == 0) /* all clr? */ | |
| CLR_INT (DLI); /* all clr? */ | |
| else SET_INT (DLI); /* no, set intr */ | |
| return; | |
| } | |
| void dli_set_int (int32 ln, uint32 wd) | |
| { | |
| dli_ireq[wd] |= (1 << ln); /* set rcv/dset int */ | |
| SET_INT (DLI); /* set master intr */ | |
| return; | |
| } | |
| int32 dli_iack (void) | |
| { | |
| int32 ln; | |
| for (ln = 0; ln < DLX_LINES; ln++) { /* find 1st line */ | |
| if ((dli_ireq[DLI_RCI] | dli_ireq[DLI_DSI]) & (1 << ln)) { | |
| dli_clr_int (ln, DLI_RCI); /* clr both req */ | |
| dli_clr_int (ln, DLI_DSI); | |
| return (dli_dib.vec + (ln * 010)); /* return vector */ | |
| } | |
| } | |
| return 0; | |
| } | |
| void dlo_clr_int (int32 ln) | |
| { | |
| dlo_ireq &= ~(1 << ln); /* clr xmit int */ | |
| if (dlo_ireq == 0) /* all clr? */ | |
| CLR_INT (DLO); | |
| else SET_INT (DLO); /* no, set intr */ | |
| return; | |
| } | |
| void dlo_set_int (int32 ln) | |
| { | |
| dlo_ireq |= (1 << ln); /* set xmit int */ | |
| SET_INT (DLO); /* set master intr */ | |
| return; | |
| } | |
| int32 dlo_iack (void) | |
| { | |
| int32 ln; | |
| for (ln = 0; ln < DLX_LINES; ln++) { /* find 1st line */ | |
| if (dlo_ireq & (1 << ln)) { | |
| dlo_clr_int (ln); /* clear intr */ | |
| return (dli_dib.vec + (ln * 010) + 4); /* return vector */ | |
| } | |
| } | |
| return 0; | |
| } | |
| /* Reset */ | |
| t_stat dlx_reset (DEVICE *dptr) | |
| { | |
| int32 ln; | |
| dlx_enbdis (dptr->flags & DEV_DIS); /* sync enables */ | |
| sim_cancel (&dli_unit); /* assume stop */ | |
| if (dli_unit.flags & UNIT_ATT) /* if attached, */ | |
| sim_activate (&dli_unit, tmxr_poll); /* activate */ | |
| for (ln = 0; ln < DLX_LINES; ln++) /* for all lines */ | |
| dlx_reset_ln (ln); | |
| return auto_config (dli_dev.name, dlx_desc.lines); /* auto config */ | |
| } | |
| /* Reset individual line */ | |
| void dlx_reset_ln (int32 ln) | |
| { | |
| dli_buf[ln] = 0; /* clear buf */ | |
| if (dlo_unit[ln].flags & DLX_MDM) /* modem */ | |
| dli_csr[ln] &= DLICSR_DTR; /* dont clr DTR */ | |
| else dli_csr[ln] = 0; | |
| dlo_buf[ln] = 0; /* clear buf */ | |
| dlo_csr[ln] = CSR_DONE; | |
| sim_cancel (&dlo_unit[ln]); /* deactivate */ | |
| dli_clr_int (ln, DLI_RCI); | |
| dli_clr_int (ln, DLI_DSI); | |
| dlo_clr_int (ln); | |
| return; | |
| } | |
| /* Attach master unit */ | |
| t_stat dlx_attach (UNIT *uptr, char *cptr) | |
| { | |
| t_stat r; | |
| r = tmxr_attach (&dlx_desc, uptr, cptr); /* attach */ | |
| if (r != SCPE_OK) /* error */ | |
| return r; | |
| sim_activate (uptr, tmxr_poll); /* start poll */ | |
| return SCPE_OK; | |
| } | |
| /* Detach master unit */ | |
| t_stat dlx_detach (UNIT *uptr) | |
| { | |
| int32 i; | |
| t_stat r; | |
| r = tmxr_detach (&dlx_desc, uptr); /* detach */ | |
| for (i = 0; i < DLX_LINES; i++) /* all lines, */ | |
| dlx_ldsc[i].rcve = 0; /* disable rcv */ | |
| sim_cancel (uptr); /* stop poll */ | |
| return r; | |
| } | |
| /* Enable/disable device */ | |
| void dlx_enbdis (int32 dis) | |
| { | |
| if (dis) { | |
| dli_dev.flags = dli_dev.flags | DEV_DIS; | |
| dlo_dev.flags = dlo_dev.flags | DEV_DIS; | |
| } | |
| else { | |
| dli_dev.flags = dli_dev.flags & ~DEV_DIS; | |
| dlo_dev.flags = dlo_dev.flags & ~DEV_DIS; | |
| } | |
| return; | |
| } | |
| /* Change number of lines */ | |
| t_stat dlx_set_lines (UNIT *uptr, int32 val, char *cptr, void *desc) | |
| { | |
| int32 newln, i, t; | |
| t_stat r; | |
| if (cptr == NULL) | |
| return SCPE_ARG; | |
| newln = get_uint (cptr, 10, DLX_LINES, &r); | |
| if ((r != SCPE_OK) || (newln == dlx_desc.lines)) | |
| return r; | |
| if (newln == 0) | |
| return SCPE_ARG; | |
| if (newln < dlx_desc.lines) { | |
| for (i = newln, t = 0; i < dlx_desc.lines; i++) | |
| t = t | dlx_ldsc[i].conn; | |
| if (t && !get_yn ("This will disconnect users; proceed [N]?", FALSE)) | |
| return SCPE_OK; | |
| for (i = newln; i < dlx_desc.lines; i++) { | |
| if (dlx_ldsc[i].conn) { | |
| tmxr_linemsg (&dlx_ldsc[i], "\r\nOperator disconnected line\r\n"); | |
| tmxr_reset_ln (&dlx_ldsc[i]); /* reset line */ | |
| } | |
| dlo_unit[i].flags |= UNIT_DIS; | |
| dlx_reset_ln (i); | |
| } | |
| } | |
| else { | |
| for (i = dlx_desc.lines; i < newln; i++) { | |
| dlo_unit[i].flags &= ~UNIT_DIS; | |
| dlx_reset_ln (i); | |
| } | |
| } | |
| dlx_desc.lines = newln; | |
| dli_dib.lnt = newln * 010; /* upd IO page lnt */ | |
| return auto_config (dli_dev.name, newln); /* auto config */ | |
| } |