blob: 263ea6fb2074ce022e4ea8ee854e704f31f208ca [file] [log] [blame] [raw]
/* pdp11_rx.c: RX11/RX01 floppy disk simulator
Copyright (c) 1993-2013, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
rx RX11/RX01 floppy disk
03-Sep-13 RMS Added explicit void * cast
07-Jul-05 RMS Removed extraneous externs
12-Oct-02 RMS Added autoconfigure support
08-Oct-02 RMS Added variable address support to bootstrap
Added vector change/display support
Revised state machine based on RX211
New data structures
Fixed reset of disabled device
26-Jan-02 RMS Revised bootstrap to conform to M9312
06-Jan-02 RMS Revised enable/disable support
30-Nov-01 RMS Added read only unit, extended SET/SHOW support
24-Nov-01 RMS Converted FLG to array
07-Sep-01 RMS Revised device disable and interrupt mechanisms
17-Jul-01 RMS Fixed warning from VC++ 6.0
26-Apr-01 RMS Added device enable/disable support
13-Apr-01 RMS Revised for register arrays
15-Feb-01 RMS Corrected bootstrap string
14-Apr-99 RMS Changed t_addr to unsigned
An RX01 diskette consists of 77 tracks, each with 26 sectors of 128B.
Tracks are numbered 0-76, sectors 1-26.
*/
#include "pdp11_defs.h"
#define RX_NUMTR 77 /* tracks/disk */
#define RX_M_TRACK 0377
#define RX_NUMSC 26 /* sectors/track */
#define RX_M_SECTOR 0177
#define RX_NUMBY 128 /* bytes/sector */
#define RX_SIZE (RX_NUMTR * RX_NUMSC * RX_NUMBY) /* bytes/disk */
#define RX_NUMDR 2 /* drives/controller */
#define RX_M_NUMDR 01
#define UNIT_V_WLK (UNIT_V_UF) /* write locked */
#define UNIT_WLK (1u << UNIT_V_UF)
#define UNIT_WPRT (UNIT_WLK | UNIT_RO) /* write protect */
#define IDLE 0 /* idle state */
#define RWDS 1 /* rw, sect next */
#define RWDT 2 /* rw, track next */
#define RWXFR 3 /* rw, transfer */
#define FILL 4 /* fill buffer */
#define EMPTY 5 /* empty buffer */
#define CMD_COMPLETE 6 /* set done next */
#define INIT_COMPLETE 7 /* init compl next */
#define RXCS_V_FUNC 1 /* function */
#define RXCS_M_FUNC 7
#define RXCS_FILL 0 /* fill buffer */
#define RXCS_EMPTY 1 /* empty buffer */
#define RXCS_WRITE 2 /* write sector */
#define RXCS_READ 3 /* read sector */
#define RXCS_RXES 5 /* read status */
#define RXCS_WRDEL 6 /* write del data */
#define RXCS_ECODE 7 /* read error code */
#define RXCS_V_DRV 4 /* drive select */
#define RXCS_V_DONE 5 /* done */
#define RXCS_V_IE 6 /* intr enable */
#define RXCS_V_TR 7 /* xfer request */
#define RXCS_V_INIT 14 /* init */
#define RXCS_V_ERR 15 /* error */
#define RXCS_FUNC (RXCS_M_FUNC << RXCS_V_FUNC)
#define RXCS_DRV (1u << RXCS_V_DRV)
#define RXCS_DONE (1u << RXCS_V_DONE)
#define RXCS_IE (1u << RXCS_V_IE)
#define RXCS_TR (1u << RXCS_V_TR)
#define RXCS_INIT (1u << RXCS_V_INIT)
#define RXCS_ERR (1u << RXCS_V_ERR)
#define RXCS_ROUT (RXCS_ERR+RXCS_TR+RXCS_IE+RXCS_DONE)
#define RXCS_IMP (RXCS_ROUT+RXCS_DRV+RXCS_FUNC)
#define RXCS_RW (RXCS_IE) /* read/write */
#define RXCS_GETFNC(x) (((x) >> RXCS_V_FUNC) & RXCS_M_FUNC)
#define RXES_CRC 0001 /* CRC error */
#define RXES_PAR 0002 /* parity error */
#define RXES_ID 0004 /* init done */
#define RXES_WLK 0010 /* write protect */
#define RXES_DD 0100 /* deleted data */
#define RXES_DRDY 0200 /* drive ready */
#define TRACK u3 /* current track */
#define CALC_DA(t,s) (((t) * RX_NUMSC) + ((s) - 1)) * RX_NUMBY
extern int32 int_req[IPL_HLVL];
int32 rx_csr = 0; /* control/status */
int32 rx_dbr = 0; /* data buffer */
int32 rx_esr = 0; /* error status */
int32 rx_ecode = 0; /* error code */
int32 rx_track = 0; /* desired track */
int32 rx_sector = 0; /* desired sector */
int32 rx_state = IDLE; /* controller state */
int32 rx_stopioe = 1; /* stop on error */
int32 rx_cwait = 100; /* command time */
int32 rx_swait = 10; /* seek, per track */
int32 rx_xwait = 1; /* tr set time */
uint8 rx_buf[RX_NUMBY] = { 0 }; /* sector buffer */
int32 rx_bptr = 0; /* buffer pointer */
int32 rx_enb = 1; /* device enable */
DEVICE rx_dev;
t_stat rx_rd (int32 *data, int32 PA, int32 access);
t_stat rx_wr (int32 data, int32 PA, int32 access);
t_stat rx_svc (UNIT *uptr);
t_stat rx_reset (DEVICE *dptr);
t_stat rx_boot (int32 unitno, DEVICE *dptr);
void rx_done (int32 esr_flags, int32 new_ecode);
/* RX11 data structures
rx_dev RX device descriptor
rx_unit RX unit list
rx_reg RX register list
rx_mod RX modifier list
*/
#define IOLN_RX 004
DIB rx_dib = {
IOBA_AUTO, IOLN_RX, &rx_rd, &rx_wr,
1, IVCL (RX), VEC_AUTO, { NULL }, IOLN_RX,
};
UNIT rx_unit[] = {
{ UDATA (&rx_svc,
UNIT_FIX+UNIT_ATTABLE+UNIT_BUFABLE+UNIT_MUSTBUF, RX_SIZE) },
{ UDATA (&rx_svc,
UNIT_FIX+UNIT_ATTABLE+UNIT_BUFABLE+UNIT_MUSTBUF, RX_SIZE) }
};
REG rx_reg[] = {
{ ORDATA (RXCS, rx_csr, 16) },
{ ORDATA (RXDB, rx_dbr, 8) },
{ ORDATA (RXES, rx_esr, 8) },
{ ORDATA (RXERR, rx_ecode, 8) },
{ ORDATA (RXTA, rx_track, 8) },
{ ORDATA (RXSA, rx_sector, 8) },
{ DRDATA (STAPTR, rx_state, 3), REG_RO },
{ DRDATA (BUFPTR, rx_bptr, 7) },
{ FLDATA (INT, IREQ (RX), INT_V_RX) },
{ FLDATA (ERR, rx_csr, RXCS_V_ERR) },
{ FLDATA (TR, rx_csr, RXCS_V_TR) },
{ FLDATA (IE, rx_csr, RXCS_V_IE) },
{ FLDATA (DONE, rx_csr, RXCS_V_DONE) },
{ DRDATA (CTIME, rx_cwait, 24), PV_LEFT },
{ DRDATA (STIME, rx_swait, 24), PV_LEFT },
{ DRDATA (XTIME, rx_xwait, 24), PV_LEFT },
{ FLDATA (STOP_IOE, rx_stopioe, 0) },
{ BRDATA (SBUF, rx_buf, 8, 8, RX_NUMBY) },
{ ORDATA (DEVADDR, rx_dib.ba, 32), REG_HRO },
{ ORDATA (DEVVEC, rx_dib.vec, 16), REG_HRO },
{ NULL }
};
MTAB rx_mod[] = {
{ UNIT_WLK, 0, "write enabled", "WRITEENABLED", NULL },
{ UNIT_WLK, UNIT_WLK, "write locked", "LOCKED", NULL },
#if defined (VM_PDP11)
{ MTAB_XTD|MTAB_VDV|MTAB_VALR, 004, "ADDRESS", "ADDRESS",
&set_addr, &show_addr, NULL },
{ MTAB_XTD|MTAB_VDV, 0, NULL, "AUTOCONFIGURE",
&set_addr_flt, NULL, NULL },
{ MTAB_XTD|MTAB_VDV|MTAB_VALR, 0, "VECTOR", "VECTOR",
&set_vec, &show_vec, NULL },
#else
{ MTAB_XTD|MTAB_VDV, 004, "ADDRESS", "ADDRESS",
NULL, &show_addr, NULL },
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", "VECTOR",
NULL, &show_vec, NULL },
#endif
{ 0 }
};
DEVICE rx_dev = {
"RX", rx_unit, rx_reg, rx_mod,
RX_NUMDR, 8, 20, 1, 8, 8,
NULL, NULL, &rx_reset,
&rx_boot, NULL, NULL,
&rx_dib, DEV_DISABLE | DEV_UBUS | DEV_QBUS
};
/* I/O dispatch routine, I/O addresses 17777170 - 17777172
17777170 floppy CSR
17777172 floppy data register
*/
t_stat rx_rd (int32 *data, int32 PA, int32 access)
{
switch ((PA >> 1) & 1) { /* decode PA<1> */
case 0: /* RXCS */
rx_csr = rx_csr & RXCS_IMP; /* clear junk */
*data = rx_csr & RXCS_ROUT;
break;
case 1: /* RXDB */
if ((rx_state == EMPTY) && (rx_csr & RXCS_TR)) {/* empty? */
sim_activate (&rx_unit[0], rx_xwait);
rx_csr = rx_csr & ~RXCS_TR; /* clear xfer */
}
*data = rx_dbr; /* return data */
break;
} /* end switch PA */
return SCPE_OK;
}
t_stat rx_wr (int32 data, int32 PA, int32 access)
{
int32 drv;
switch ((PA >> 1) & 1) { /* decode PA<1> */
/* Writing RXCS, three cases:
1. Writing INIT, reset device
2. Idle and writing new function
- clear error, done, transfer ready, int req
- save int enable, function, drive
- start new function
3. Otherwise, write IE and update interrupts
*/
case 0: /* RXCS */
rx_csr = rx_csr & RXCS_IMP; /* clear junk */
if (access == WRITEB) data = (PA & 1)? /* write byte? */
(rx_csr & 0377) | (data << 8): (rx_csr & ~0377) | data;
if (data & RXCS_INIT) { /* initialize? */
rx_reset (&rx_dev); /* reset device */
return SCPE_OK; /* end if init */
}
if ((data & CSR_GO) && (rx_state == IDLE)) { /* new function? */
rx_csr = data & (RXCS_IE + RXCS_DRV + RXCS_FUNC);
drv = ((rx_csr & RXCS_DRV)? 1: 0); /* reselect drive */
rx_bptr = 0; /* clear buf pointer */
switch (RXCS_GETFNC (data)) { /* case on func */
case RXCS_FILL:
rx_state = FILL; /* state = fill */
rx_csr = rx_csr | RXCS_TR; /* xfer is ready */
break;
case RXCS_EMPTY:
rx_state = EMPTY; /* state = empty */
sim_activate (&rx_unit[drv], rx_xwait);
break;
case RXCS_READ: case RXCS_WRITE: case RXCS_WRDEL:
rx_state = RWDS; /* state = get sector */
rx_csr = rx_csr | RXCS_TR; /* xfer is ready */
rx_esr = rx_esr & RXES_ID; /* clear errors */
break;
default:
rx_state = CMD_COMPLETE; /* state = cmd compl */
sim_activate (&rx_unit[drv], rx_cwait);
break;
} /* end switch func */
return SCPE_OK;
} /* end if GO */
if ((data & RXCS_IE) == 0)
CLR_INT (RX);
else if ((rx_csr & (RXCS_DONE + RXCS_IE)) == RXCS_DONE)
SET_INT (RX);
rx_csr = (rx_csr & ~RXCS_RW) | (data & RXCS_RW);
break; /* end case RXCS */
/* Accessing RXDB, two cases:
1. Write idle, write
2. Write not idle and TR set, state dependent
*/
case 1: /* RXDB */
if ((PA & 1) || ((rx_state != IDLE) && ((rx_csr & RXCS_TR) == 0)))
return SCPE_OK; /* if ~IDLE, need tr */
rx_dbr = data & 0377; /* save data */
if ((rx_state != IDLE) && (rx_state != EMPTY)) {
drv = ((rx_csr & RXCS_DRV)? 1: 0); /* select drive */
sim_activate (&rx_unit[drv], rx_xwait); /* sched event */
rx_csr = rx_csr & ~RXCS_TR; /* clear xfer */
}
break; /* end case RXDB */
} /* end switch PA */
return SCPE_OK;
}
/* Unit service; the action to be taken depends on the transfer state:
IDLE Should never get here
RWDS Save sector, set TR, set RWDT
RWDT Save track, set RWXFR
RWXFR Read/write buffer
FILL copy ir to rx_buf[rx_bptr], advance ptr
if rx_bptr > max, finish command, else set tr
EMPTY if rx_bptr > max, finish command, else
copy rx_buf[rx_bptr] to ir, advance ptr, set tr
CMD_COMPLETE copy requested data to ir, finish command
INIT_COMPLETE read drive 0, track 1, sector 1 to buffer, finish command
For RWDT and CMD_COMPLETE, the input argument is the selected drive;
otherwise, it is drive 0.
*/
t_stat rx_svc (UNIT *uptr)
{
int32 i, func;
uint32 da;
int8 *fbuf = (int8 *) uptr->filebuf;
func = RXCS_GETFNC (rx_csr); /* get function */
switch (rx_state) { /* case on state */
case IDLE: /* idle */
return SCPE_IERR; /* done */
case EMPTY: /* empty buffer */
if (rx_bptr >= RX_NUMBY) /* done all? */
rx_done (0, 0);
else {
rx_dbr = rx_buf[rx_bptr]; /* get next */
rx_bptr = rx_bptr + 1;
rx_csr = rx_csr | RXCS_TR; /* set xfer */
}
break;
case FILL: /* fill buffer */
rx_buf[rx_bptr] = rx_dbr; /* write next */
rx_bptr = rx_bptr + 1;
if (rx_bptr < RX_NUMBY) /* more? set xfer */
rx_csr = rx_csr | RXCS_TR;
else rx_done (0, 0); /* else done */
break;
case RWDS: /* wait for sector */
rx_sector = rx_dbr & RX_M_SECTOR; /* save sector */
rx_csr = rx_csr | RXCS_TR; /* set xfer */
rx_state = RWDT; /* advance state */
return SCPE_OK;
case RWDT: /* wait for track */
rx_track = rx_dbr & RX_M_TRACK; /* save track */
rx_state = RWXFR;
sim_activate (uptr, /* sched done */
rx_swait * abs (rx_track - uptr->TRACK));
return SCPE_OK;
case RWXFR:
if ((uptr->flags & UNIT_BUF) == 0) { /* not buffered? */
rx_done (0, 0110); /* done, error */
return IORETURN (rx_stopioe, SCPE_UNATT);
}
if (rx_track >= RX_NUMTR) { /* bad track? */
rx_done (0, 0040); /* done, error */
break;
}
uptr->TRACK = rx_track; /* now on track */
if ((rx_sector == 0) || (rx_sector > RX_NUMSC)) { /* bad sect? */
rx_done (0, 0070); /* done, error */
break;
}
da = CALC_DA (rx_track, rx_sector); /* get disk address */
if (func == RXCS_WRDEL) /* del data? */
rx_esr = rx_esr | RXES_DD;
if (func == RXCS_READ) { /* read? */
for (i = 0; i < RX_NUMBY; i++)
rx_buf[i] = fbuf[da + i];
}
else {
if (uptr->flags & UNIT_WPRT) { /* write and locked? */
rx_done (RXES_WLK, 0100); /* done, error */
break;
}
for (i = 0; i < RX_NUMBY; i++) /* write */
fbuf[da + i] = rx_buf[i];
da = da + RX_NUMBY;
if (da > uptr->hwmark)
uptr->hwmark = da;
}
rx_done (0, 0); /* done */
break;
case CMD_COMPLETE: /* command complete */
if (func == RXCS_ECODE) { /* read ecode? */
rx_dbr = rx_ecode; /* set dbr */
rx_done (0, -1); /* don't update */
}
else rx_done (0, 0);
break;
case INIT_COMPLETE: /* init complete */
rx_unit[0].TRACK = 1; /* drive 0 to trk 1 */
rx_unit[1].TRACK = 0; /* drive 1 to trk 0 */
if ((rx_unit[0].flags & UNIT_BUF) == 0) { /* not buffered? */
rx_done (RXES_ID, 0010); /* init done, error */
break;
}
da = CALC_DA (1, 1); /* track 1, sector 1 */
for (i = 0; i < RX_NUMBY; i++) /* read sector */
rx_buf[i] = fbuf[da + i];
rx_done (RXES_ID, 0); /* set done */
if ((rx_unit[1].flags & UNIT_ATT) == 0)
rx_ecode = 0020;
break;
} /* end case state */
return SCPE_OK;
}
/* Command complete. Set done and put final value in interface register,
request interrupt if needed, return to IDLE state.
*/
void rx_done (int32 esr_flags, int32 new_ecode)
{
int32 drv = (rx_csr & RXCS_DRV)? 1: 0;
rx_state = IDLE; /* now idle */
rx_csr = rx_csr | RXCS_DONE; /* set done */
if (rx_csr & RXCS_IE) SET_INT (RX); /* if ie, intr */
rx_esr = (rx_esr | esr_flags) & ~RXES_DRDY;
if (rx_unit[drv].flags & UNIT_ATT)
rx_esr = rx_esr | RXES_DRDY;
if (new_ecode > 0) /* test for error */
rx_csr = rx_csr | RXCS_ERR;
if (new_ecode < 0) /* don't update? */
return;
rx_ecode = new_ecode; /* update ecode */
rx_dbr = rx_esr; /* update RXDB */
return;
}
/* Device initialization. The RX is one of the few devices that schedules
an I/O transfer as part of its initialization.
*/
t_stat rx_reset (DEVICE *dptr)
{
rx_csr = rx_dbr = 0; /* clear regs */
rx_esr = rx_ecode = 0; /* clear error */
rx_track = rx_sector = 0; /* clear addr */
rx_state = IDLE; /* ctrl idle */
CLR_INT (RX); /* clear int req */
sim_cancel (&rx_unit[1]); /* cancel drive 1 */
if (dptr->flags & DEV_DIS) /* disabled? */
sim_cancel (&rx_unit[0]);
else if (rx_unit[0].flags & UNIT_BUF) { /* attached? */
rx_state = INIT_COMPLETE; /* yes, sched init */
sim_activate (&rx_unit[0], rx_swait * abs (1 - rx_unit[0].TRACK));
}
else rx_done (0, 0010); /* no, error */
return auto_config (0, 0); /* run autoconfig */
}
/* Device bootstrap */
#define BOOT_START 02000 /* start */
#define BOOT_ENTRY (BOOT_START + 002) /* entry */
#define BOOT_UNIT (BOOT_START + 010) /* unit number */
#define BOOT_CSR (BOOT_START + 026) /* CSR */
#define BOOT_LEN (sizeof (boot_rom) / sizeof (int16))
static const uint16 boot_rom[] = {
042130, /* "XD" */
0012706, BOOT_START, /* MOV #boot_start, SP */
0012700, 0000000, /* MOV #unit, R0 ; unit number */
0010003, /* MOV R0, R3 */
0006303, /* ASL R3 */
0006303, /* ASL R3 */
0006303, /* ASL R3 */
0006303, /* ASL R3 */
0012701, 0177170, /* MOV #RXCS, R1 ; csr */
0032711, 0000040, /* BITB #40, (R1) ; ready? */
0001775, /* BEQ .-4 */
0052703, 0000007, /* BIS #READ+GO, R3 */
0010311, /* MOV R3, (R1) ; read & go */
0105711, /* TSTB (R1) ; xfr ready? */
0100376, /* BPL .-2 */
0012761, 0000001, 0000002, /* MOV #1, 2(R1) ; sector */
0105711, /* TSTB (R1) ; xfr ready? */
0100376, /* BPL .-2 */
0012761, 0000001, 0000002, /* MOV #1, 2(R1) ; track */
0005003, /* CLR R3 */
0032711, 0000040, /* BITB #40, (R1) ; ready? */
0001775, /* BEQ .-4 */
0012711, 0000003, /* MOV #EMPTY+GO, (R1) ; empty & go */
0105711, /* TSTB (R1) ; xfr, done? */
0001776, /* BEQ .-2 */
0100003, /* BPL .+010 */
0116123, 0000002, /* MOVB 2(R1), (R3)+ ; move byte */
0000772, /* BR .-012 */
0005002, /* CLR R2 */
0005003, /* CLR R3 */
0012704, BOOT_START+020, /* MOV #START+20, R4 */
0005005, /* CLR R5 */
0005007 /* CLR R7 */
};
t_stat rx_boot (int32 unitno, DEVICE *dptr)
{
size_t i;
extern int32 saved_PC;
extern uint16 *M;
for (i = 0; i < BOOT_LEN; i++)
M[(BOOT_START >> 1) + i] = boot_rom[i];
M[BOOT_UNIT >> 1] = unitno & RX_M_NUMDR;
M[BOOT_CSR >> 1] = rx_dib.ba & DMASK;
saved_PC = BOOT_ENTRY;
return SCPE_OK;
}