/* id_pas.c: Interdata programmable async line adapter simulator | |
Copyright (c) 2001-2005, Robert M Supnik | |
Permission is hereby granted, free of charge, to any person obtaining a | |
copy of this software and associated documentation files (the "Software"), | |
to deal in the Software without restriction, including without limitation | |
the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
and/or sell copies of the Software, and to permit persons to whom the | |
Software is furnished to do so, subject to the following conditions: | |
The above copyright notice and this permission notice shall be included in | |
all copies or substantial portions of the Software. | |
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
Except as contained in this notice, the name of Robert M Supnik shall not be | |
used in advertising or otherwise to promote the sale, use or other dealings | |
in this Software without prior written authorization from Robert M Supnik. | |
pas Programmable asynchronous line adapter(s) | |
22-Nov-05 RMS Revised for new terminal processing routines | |
29-Jun-05 RMS Added SET PASLn DISCONNECT | |
21-Jun-05 RMS Fixed bug in SHOW CONN/STATS | |
05-Jan-04 RMS Revised for tmxr library changes | |
09-May-03 RMS Added network device flag | |
This module implements up to 32 individual serial interfaces, representing | |
either individual PASLA modules or combinations of the 2-line and 8-line | |
multiplexors, which are functionally very similar. These interfaces are mapped | |
to Telnet based connections as the lines of a terminal multiplexor. The | |
connection polling mechanism and the character input polling for all lines | |
are done through a single polling job. | |
*/ | |
#include "id_defs.h" | |
#include "sim_sock.h" | |
#include "sim_tmxr.h" | |
#include <ctype.h> | |
#define PAS_LINES 32 | |
#define UNIT_V_MDM (TTUF_V_UF + 0) /* modem control */ | |
#define UNIT_MDM (1 << UNIT_V_MDM) | |
#define PAS_INIT_POLL 8000 | |
#define PASL_WAIT 500 | |
/* Status byte */ | |
#define STA_OVR 0x80 /* overrun RO */ | |
#define STA_PF 0x40 /* parity err RONI */ | |
#define STA_NCL2S 0x40 /* not clr to snd XO */ | |
#define STA_FR 0x20 /* framing err RO */ | |
#define STA_RCR 0x10 /* rv chan rcv NI */ | |
#define STA_CROF 0x02 /* carrier off RO */ | |
#define STA_RING 0x01 /* ring RO */ | |
#define STA_RCV (STA_OVR|STA_PF|STA_FR|STA_RCR|STA_CROF|STA_RING) | |
#define SET_EX (STA_OVR|STA_PF|STA_FR) | |
#define STA_XMT (STA_BSY) | |
/* Command bytes 1,0 */ | |
#define CMD_DTR (0x20 << 8) /* DTR */ | |
#define CMD_ECHO (0x10 << 8) /* echoplex */ | |
#define CMD_RCT (0x08 << 8) /* RCT/DTB NI */ | |
#define CMD_XMTB (0x04 << 8) /* xmt break NI */ | |
#define CMD_WRT (0x02 << 8) /* write/read */ | |
#define CMD_V_CLK 6 /* baud rate */ | |
#define CMD_M_CLK 0x3 | |
#define CMD_V_DB 4 /* data bits */ | |
#define CMD_M_DB 0x3 | |
#define CMD_STOP 0x80 /* stop bit */ | |
#define CMD_V_PAR 1 /* parity */ | |
#define CMD_M_PAR 0x3 | |
#define GET_PAR(x) (((x) >> CMD_V_PAR) & CMD_M_PAR) | |
#define PAR_NONE 0 | |
#define PAR_RAW 1 | |
#define PAR_ODD 2 | |
#define PAR_EVEN 3 | |
#define CMD_TYP 0x01 /* command type */ | |
extern uint32 int_req[INTSZ], int_enb[INTSZ]; | |
uint8 pas_sta[PAS_LINES]; /* status */ | |
uint16 pas_cmd[PAS_LINES]; /* command */ | |
uint8 pas_rbuf[PAS_LINES]; /* rcv buf */ | |
uint8 pas_xbuf[PAS_LINES]; /* xmt buf */ | |
uint8 pas_rarm[PAS_LINES]; /* rcvr int armed */ | |
uint8 pas_xarm[PAS_LINES]; /* xmt int armed */ | |
uint8 pas_rchp[PAS_LINES]; /* rcvr chr pend */ | |
uint32 pas_tps = 50; /* polls/second */ | |
uint8 pas_tplte[PAS_LINES * 2 + 1]; /* template */ | |
TMLN pas_ldsc[PAS_LINES] = { 0 }; /* line descriptors */ | |
TMXR pas_desc = { 8, 0, 0, pas_ldsc }; /* mux descriptor */ | |
#define PAS_ENAB pas_desc.lines | |
uint32 pas (uint32 dev, uint32 op, uint32 dat); | |
void pas_ini (t_bool dtpl); | |
t_stat pasi_svc (UNIT *uptr); | |
t_stat paso_svc (UNIT *uptr); | |
t_stat pas_reset (DEVICE *dptr); | |
t_stat pas_attach (UNIT *uptr, char *cptr); | |
t_stat pas_detach (UNIT *uptr); | |
t_stat pas_summ (FILE *st, UNIT *uptr, int32 val, void *desc); | |
t_stat pas_show (FILE *st, UNIT *uptr, int32 val, void *desc); | |
int32 pas_par (int32 cmd, int32 c); | |
t_stat pas_vlines (UNIT *uptr, int32 val, char *cptr, void *desc); | |
void pas_reset_ln (int32 i); | |
/* PAS data structures | |
pas_dev PAS device descriptor | |
pas_unit PAS unit descriptor | |
pas_reg PAS register list | |
pas_mod PAS modifiers list | |
*/ | |
DIB pas_dib = { d_PAS, -1, v_PAS, pas_tplte, &pas, &pas_ini }; | |
UNIT pas_unit = { UDATA (&pasi_svc, UNIT_ATTABLE, 0), PAS_INIT_POLL }; | |
REG pas_nlreg = { DRDATA (NLINES, PAS_ENAB, 6), PV_LEFT }; | |
REG pas_reg[] = { | |
{ BRDATA (STA, pas_sta, 16, 8, PAS_LINES) }, | |
{ BRDATA (CMD, pas_cmd, 16, 16, PAS_LINES) }, | |
{ BRDATA (RBUF, pas_rbuf, 16, 8, PAS_LINES) }, | |
{ BRDATA (XBUF, pas_xbuf, 16, 8, PAS_LINES) }, | |
{ BRDATA (IREQ, &int_req[l_PAS], 16, 32, PAS_LINES / 16) }, | |
{ BRDATA (IENB, &int_enb[l_PAS], 16, 32, PAS_LINES / 16) }, | |
{ BRDATA (RARM, pas_rarm, 16, 1, PAS_LINES) }, | |
{ BRDATA (XARM, pas_xarm, 16, 1, PAS_LINES) }, | |
{ BRDATA (RCHP, pas_rchp, 16, 1, PAS_LINES) }, | |
{ HRDATA (DEVNO, pas_dib.dno, 8), REG_HRO }, | |
{ NULL } | |
}; | |
MTAB pas_mod[] = { | |
{ MTAB_XTD | MTAB_VDV | MTAB_VAL, 0, "lines", "LINES", | |
&pas_vlines, NULL, &pas_nlreg }, | |
{ MTAB_XTD | MTAB_VDV, 1, NULL, "DISCONNECT", | |
&tmxr_dscln, NULL, &pas_desc }, | |
{ UNIT_ATT, UNIT_ATT, "connections", NULL, NULL, &pas_summ }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, 1, "CONNECTIONS", NULL, | |
NULL, &pas_show, NULL }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, 0, "STATISTICS", NULL, | |
NULL, &pas_show, NULL }, | |
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO", | |
&set_dev, &show_dev, NULL }, | |
{ 0 } | |
}; | |
DEVICE pas_dev = { | |
"PAS", &pas_unit, pas_reg, pas_mod, | |
1, 10, 31, 1, 16, 8, | |
&tmxr_ex, &tmxr_dep, &pas_reset, | |
NULL, &pas_attach, &pas_detach, | |
&pas_dib, DEV_NET | DEV_DISABLE | |
}; | |
/* PASL data structures | |
pasl_dev PASL device descriptor | |
pasl_unit PASL unit descriptor | |
pasl_reg PASL register list | |
pasl_mod PASL modifiers list | |
*/ | |
UNIT pasl_unit[] = { | |
{ UDATA (&paso_svc, 0, 0), PASL_WAIT }, /* all but 8 dis */ | |
{ UDATA (&paso_svc, 0, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, 0, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, 0, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, 0, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, 0, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, 0, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, 0, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT }, | |
{ UDATA (&paso_svc, UNIT_DIS, 0), PASL_WAIT } | |
}; | |
MTAB pasl_mod[] = { | |
{ TT_MODE, TT_MODE_UC, "UC", "UC", NULL }, | |
{ TT_MODE, TT_MODE_7B, "7b", "7B", NULL }, | |
{ TT_MODE, TT_MODE_8B, "8b", "8B", NULL }, | |
{ TT_MODE, TT_MODE_7P, "7p", "7P", NULL }, | |
{ UNIT_MDM, 0, "no dataset", "NODATASET", NULL }, | |
{ UNIT_MDM, UNIT_MDM, "dataset", "DATASET", NULL }, | |
{ MTAB_XTD|MTAB_VDV, 0, NULL, "DISCONNECT", | |
&tmxr_dscln, NULL, &pas_desc }, | |
{ MTAB_XTD|MTAB_VUN|MTAB_NC, 0, "LOG", "LOG", | |
&tmxr_set_log, &tmxr_show_log, &pas_desc }, | |
{ MTAB_XTD|MTAB_VUN|MTAB_NC, 0, NULL, "NOLOG", | |
&tmxr_set_nolog, NULL, &pas_desc }, | |
{ 0 } | |
}; | |
REG pasl_reg[] = { | |
{ URDATA (TIME, pasl_unit[0].wait, 16, 24, 0, | |
PAS_LINES, REG_NZ + PV_LEFT) }, | |
{ NULL } | |
}; | |
DEVICE pasl_dev = { | |
"PASL", pasl_unit, pasl_reg, pasl_mod, | |
PAS_LINES, 10, 31, 1, 16, 8, | |
NULL, NULL, &pas_reset, | |
NULL, NULL, NULL, | |
NULL, 0 | |
}; | |
/* PAS: IO routine */ | |
uint32 pas (uint32 dev, uint32 op, uint32 dat) | |
{ | |
int32 ln = (dev - pas_dib.dno) >> 1; | |
int32 xmt = (dev - pas_dib.dno) & 1; | |
int32 t, old_cmd; | |
switch (op) { /* case IO op */ | |
case IO_ADR: /* select */ | |
return BY; /* byte only */ | |
case IO_RD: /* read */ | |
pas_rchp[ln] = 0; /* clr chr pend */ | |
pas_sta[ln] = pas_sta[ln] & ~STA_OVR; /* clr overrun */ | |
return pas_rbuf[ln]; /* return buf */ | |
case IO_WD: /* write */ | |
pas_xbuf[ln] = dat & 0xFF; /* store char */ | |
pas_sta[ln] = pas_sta[ln] | STA_BSY; /* set busy */ | |
sim_activate (&pasl_unit[ln], pasl_unit[ln].wait); | |
break; | |
case IO_SS: /* status */ | |
if (xmt) { /* xmt side? */ | |
if (pas_ldsc[ln].conn == 0) /* not conn? */ | |
t = STA_NCL2S | STA_BSY; /* busy, not clr */ | |
else t = pas_sta[ln] & STA_XMT; /* else just busy */ | |
} | |
else { | |
t = pas_sta[ln] & STA_RCV; /* get static */ | |
if (!pas_rchp[ln]) t = t | STA_BSY; /* no char? busy */ | |
if (pas_ldsc[ln].conn == 0) /* not connected? */ | |
t = t | STA_BSY | STA_EX; /* = !dsr */ | |
if (t & SET_EX) t = t | STA_EX; /* test for ex */ | |
} | |
return t; | |
case IO_OC: /* command */ | |
old_cmd = pas_cmd[ln]; /* old cmd */ | |
if (dat & CMD_TYP) { /* type 1? */ | |
pas_cmd[ln] = (pas_cmd[ln] & 0xFF) | (dat << 8); | |
if (pas_cmd[ln] & CMD_WRT) /* write? */ | |
pas_xarm[ln] = int_chg (v_PASX + ln + ln, dat, pas_xarm[ln]); | |
else pas_rarm[ln] = int_chg (v_PAS + ln + ln, dat, pas_rarm[ln]); | |
} | |
else pas_cmd[ln] = (pas_cmd[ln] & ~0xFF) | dat; | |
if (pasl_unit[ln].flags & UNIT_MDM) { /* modem ctrl? */ | |
if ((pas_cmd[ln] & CMD_DTR) && (pas_sta[ln] & STA_RING)) | |
pas_sta[ln] = pas_sta[ln] & ~(STA_CROF | STA_RING); | |
if (old_cmd & ~pas_cmd[ln] & CMD_DTR) { | |
tmxr_linemsg (&pas_ldsc[ln], "\r\nLine hangup\r\n"); | |
tmxr_reset_ln (&pas_ldsc[ln]); /* reset line */ | |
pas_sta[ln] = pas_sta[ln] | STA_CROF; /* no carrier */ | |
if (pas_rarm[ln]) SET_INT (v_PAS + ln + ln); | |
} | |
} | |
break; | |
} | |
return 0; | |
} | |
/* Unit service - receive side | |
Poll all active lines for input | |
Poll for new connections | |
*/ | |
t_stat pasi_svc (UNIT *uptr) | |
{ | |
int32 ln, c, out, t; | |
if ((uptr->flags & UNIT_ATT) == 0) return SCPE_OK; /* attached? */ | |
t = sim_rtcn_calb (pas_tps, TMR_PAS); /* calibrate */ | |
sim_activate (uptr, t); /* continue poll */ | |
ln = tmxr_poll_conn (&pas_desc); /* look for connect */ | |
if (ln >= 0) { /* got one? */ | |
if ((pasl_unit[ln].flags & UNIT_MDM) && /* modem control */ | |
((pas_cmd[ln] & CMD_DTR) == 0)) /* & !dtr? */ | |
pas_sta[ln] = pas_sta[ln] | STA_RING | STA_CROF; /* set ring, no cd */ | |
else pas_sta[ln] = pas_sta[ln] & ~STA_CROF; /* just answer */ | |
if (pas_rarm[ln]) SET_INT (v_PAS + ln + ln); /* interrupt */ | |
pas_ldsc[ln].rcve = 1; /* rcv enabled */ | |
} | |
tmxr_poll_rx (&pas_desc); /* poll for input */ | |
for (ln = 0; ln < PAS_ENAB; ln++) { /* loop thru lines */ | |
if (pas_ldsc[ln].conn) { /* connected? */ | |
if (c = tmxr_getc_ln (&pas_ldsc[ln])) { /* any char? */ | |
pas_sta[ln] = pas_sta[ln] & ~(STA_FR | STA_PF); | |
if (pas_rchp[ln]) pas_sta[ln] = pas_sta[ln] | STA_OVR; | |
if (pas_rarm[ln]) SET_INT (v_PAS + ln + ln); | |
if (c & SCPE_BREAK) { /* break? */ | |
pas_sta[ln] = pas_sta[ln] | STA_FR; /* framing error */ | |
pas_rbuf[ln] = 0; /* no character */ | |
} | |
else { /* normal */ | |
out = c & 0x7F; /* echo is 7b */ | |
c = sim_tt_inpcvt (c, TT_GET_MODE (pasl_unit[ln].flags)); | |
if (TT_GET_MODE (pasl_unit[ln].flags) != TT_MODE_8B) | |
c = pas_par (pas_cmd[ln], c); /* apply parity */ | |
pas_rbuf[ln] = c; /* save char */ | |
pas_rchp[ln] = 1; /* char pending */ | |
if ((pas_cmd[ln] & CMD_ECHO) && pas_ldsc[ln].xmte) { | |
TMLN *lp = &pas_ldsc[ln]; /* get line */ | |
out = sim_tt_outcvt (out, TT_GET_MODE (pasl_unit[ln].flags)); | |
if (out >= 0) tmxr_putc_ln (lp, out); /* output char */ | |
tmxr_poll_tx (&pas_desc); /* poll xmt */ | |
} | |
} /* end else normal */ | |
} /* end if char */ | |
} /* end if conn */ | |
else if ((pas_sta[ln] & STA_CROF) == 0) { /* not conn, was conn? */ | |
pas_sta[ln] = pas_sta[ln] | STA_CROF; /* no carrier */ | |
if (pas_rarm[ln]) SET_INT (v_PAS + ln + ln); /* intr */ | |
} | |
} /* end for */ | |
return SCPE_OK; | |
} | |
/* Unit service - transmit side */ | |
t_stat paso_svc (UNIT *uptr) | |
{ | |
int32 c; | |
uint32 ln = uptr - pasl_unit; /* line # */ | |
if (pas_ldsc[ln].conn) { /* connected? */ | |
if (pas_ldsc[ln].xmte) { /* xmt enabled? */ | |
TMLN *lp = &pas_ldsc[ln]; /* get line */ | |
if (TT_GET_MODE (pasl_unit[ln].flags) == TT_MODE_8B) | |
c = pas_par (pas_cmd[ln], pas_xbuf[ln]); /* apply parity */ | |
else c = sim_tt_outcvt (pas_xbuf[ln], TT_GET_MODE (pasl_unit[ln].flags)); | |
if (c >= 0) { | |
tmxr_putc_ln (lp, c); /* output char */ | |
} | |
tmxr_poll_tx (&pas_desc); /* poll xmt */ | |
} | |
else { /* buf full */ | |
tmxr_poll_tx (&pas_desc); /* poll xmt */ | |
sim_activate (uptr, pasl_unit[ln].wait); /* wait */ | |
return SCPE_OK; | |
} | |
} | |
pas_sta[ln] = pas_sta[ln] & ~STA_BSY; /* not busy */ | |
if (pas_xarm[ln]) SET_INT (v_PASX + ln + ln); /* set intr */ | |
return SCPE_OK; | |
} | |
int32 pas_par (int32 cmd, int32 c) | |
{ | |
int32 pf = GET_PAR (cmd); | |
static const uint8 odd_par[] = { | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, /* 00 */ | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, /* 10 */ | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, /* 20 */ | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, /* 30 */ | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, /* 40 */ | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, /* 50 */ | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, /* 60 */ | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, /* 70 */ | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, /* 80 */ | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, /* 90 */ | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, /* A0 */ | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, /* B0 */ | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, /* C0 */ | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, /* D0 */ | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80, /* E0 */ | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, | |
0x80, 0, 0, 0x80, 0, 0x80, 0x80, 0, /* F0 */ | |
0, 0x80, 0x80, 0, 0x80, 0, 0, 0x80 | |
}; | |
switch (pf) { /* case on parity */ | |
case PAR_ODD: | |
return (odd_par[c & 0x7F]) | (c & 0x7F); | |
case PAR_EVEN: | |
return (odd_par[c & 0x7F] ^ 0x80) | (c & 0x7F); | |
case PAR_NONE: | |
case PAR_RAW: | |
break; | |
} | |
return c & 0xFF; | |
} | |
/* Reset routine */ | |
t_stat pas_reset (DEVICE *dptr) | |
{ | |
int32 i, t; | |
if (dptr->flags & DEV_DIS) { /* disabled? */ | |
pas_dev.flags = pas_dev.flags | DEV_DIS; /* disable lines */ | |
pasl_dev.flags = pasl_dev.flags | DEV_DIS; | |
} | |
else { | |
pas_dev.flags = pas_dev.flags & ~DEV_DIS; /* enable lines */ | |
pasl_dev.flags = pasl_dev.flags & ~DEV_DIS; | |
} | |
if (pas_unit.flags & UNIT_ATT) { /* master att? */ | |
if (!sim_is_active (&pas_unit)) { | |
t = sim_rtcn_init (pas_unit.wait, TMR_PAS); | |
sim_activate (&pas_unit, t); /* activate */ | |
} | |
} | |
else sim_cancel (&pas_unit); /* else stop */ | |
for (i = 0; i < PAS_LINES; i++) pas_reset_ln (i); | |
return SCPE_OK; | |
} | |
/* Attach master unit */ | |
t_stat pas_attach (UNIT *uptr, char *cptr) | |
{ | |
t_stat r; | |
r = tmxr_attach (&pas_desc, uptr, cptr); /* attach */ | |
if (r != SCPE_OK) return r; /* error */ | |
sim_rtcn_init (pas_unit.wait, TMR_PAS); | |
sim_activate (uptr, 100); /* quick poll */ | |
return SCPE_OK; | |
} | |
/* Detach master unit */ | |
t_stat pas_detach (UNIT *uptr) | |
{ | |
int32 i; | |
t_stat r; | |
r = tmxr_detach (&pas_desc, uptr); /* detach */ | |
for (i = 0; i < PAS_LINES; i++) pas_ldsc[i].rcve = 0; /* disable rcv */ | |
sim_cancel (uptr); /* stop poll */ | |
return r; | |
} | |
/* Show summary processor */ | |
t_stat pas_summ (FILE *st, UNIT *uptr, int32 val, void *desc) | |
{ | |
int32 i, t; | |
for (i = t = 0; i < PAS_LINES; i++) t = t + (pas_ldsc[i].conn != 0); | |
if (t == 1) fprintf (st, "1 connection"); | |
else fprintf (st, "%d connections", t); | |
return SCPE_OK; | |
} | |
/* SHOW CONN/STAT processor */ | |
t_stat pas_show (FILE *st, UNIT *uptr, int32 val, void *desc) | |
{ | |
int32 i, t; | |
for (i = t = 0; i < PAS_LINES; i++) t = t + (pas_ldsc[i].conn != 0); | |
if (t) { | |
for (i = 0; i < PAS_LINES; i++) { | |
if (pas_ldsc[i].conn) { | |
if (val) tmxr_fconns (st, &pas_ldsc[i], i); | |
else tmxr_fstats (st, &pas_ldsc[i], i); | |
} | |
} | |
} | |
else fprintf (st, "all disconnected\n"); | |
return SCPE_OK; | |
} | |
/* Change number of lines */ | |
t_stat pas_vlines (UNIT *uptr, int32 val, char *cptr, void *desc) | |
{ | |
int32 newln, i, t; | |
t_stat r; | |
if (cptr == NULL) return SCPE_ARG; | |
newln = get_uint (cptr, 10, PAS_LINES, &r); | |
if ((r != SCPE_OK) || (newln == PAS_ENAB)) return r; | |
if (newln == 0) return SCPE_ARG; | |
if (newln < PAS_ENAB) { | |
for (i = newln, t = 0; i < PAS_ENAB; i++) t = t | pas_ldsc[i].conn; | |
if (t && !get_yn ("This will disconnect users; proceed [N]?", FALSE)) | |
return SCPE_OK; | |
for (i = newln; i < PAS_ENAB; i++) { | |
if (pas_ldsc[i].conn) { | |
tmxr_linemsg (&pas_ldsc[i], "\r\nOperator disconnected line\r\n"); | |
tmxr_reset_ln (&pas_ldsc[i]); /* reset line */ | |
} | |
pasl_unit[i].flags = pasl_unit[i].flags | UNIT_DIS; | |
pas_reset_ln (i); | |
} | |
} | |
else { | |
for (i = PAS_ENAB; i < newln; i++) { | |
pasl_unit[i].flags = pasl_unit[i].flags & ~UNIT_DIS; | |
pas_reset_ln (i); | |
} | |
} | |
PAS_ENAB = newln; | |
return SCPE_OK; | |
} | |
/* Reset an individual line */ | |
void pas_reset_ln (int32 i) | |
{ | |
CLR_INT (v_PAS + i + i); /* clear int */ | |
CLR_ENB (v_PAS + i + i); | |
CLR_INT (v_PASX + i + i); /* disable int */ | |
CLR_ENB (v_PASX + i + i); | |
pas_rarm[i] = pas_xarm[i] = 0; /* disarm int */ | |
pas_rbuf[i] = pas_xbuf[i] = 0; /* clear state */ | |
pas_cmd[i] = 0; | |
pas_rchp[i] = 0; | |
pas_sta[i] = 0; | |
if (pas_ldsc[i].conn == 0) /* clear carrier */ | |
pas_sta[i] = pas_sta[i] | STA_CROF; | |
sim_cancel (&pasl_unit[i]); | |
return; | |
} | |
/* Init template */ | |
void pas_ini (t_bool dtpl) | |
{ | |
int32 i, j; | |
for (i = j = 0; i < PAS_ENAB; i++) { | |
pas_tplte[j] = j; | |
pas_tplte[j + 1] = j + o_PASX; | |
j = j + 2; | |
} | |
pas_tplte[j] = TPL_END; | |
return; | |
} |