blob: c193cbe04d7692791b07964a66c3554095069fb2 [file] [log] [blame] [raw]
/* pdp11_vh.c: DHQ11 asynchronous terminal multiplexor simulator
Copyright (c) 2004-2012, John A. Dundas III
Portions derived from work by Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of the Author shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from the Author.
vh DHQ11 asynch multiplexor for SIMH
02-Jun-11 MP Added debugging support to trace register, interrupt
and data traffic (SET VH DEBUG[=REG;INT;XMT;RCV])
Added SET LOG and SET NOLOG support for logging mux
traffic
Fixed SET VH LINES=n to correctly adjust the number
of lines available to be 8, 16, 24, or 32.
Fixed performance issue avoiding redundant polling
03-Jan-10 JAD Eliminate gcc warnings
24-Nov-08 JDB Removed tmxr_send_buffered_data declaration (now in sim_tmxr.h)
19-Nov-08 RMS Revised for common TMXR show routines
18-Jun-07 RMS Added UNIT_IDLE flag
29-Oct-06 RMS Synced poll and clock
07-Jul-05 RMS Removed extraneous externs
15-Jun-05 RMS Revised for new autoconfigure interface
Fixed bug in vector display routine
12-Jun-04 RMS Repair MS2SIMH macro to avoid divide by 0 bug
08-Jun-04 JAD Repair vh_dev initialization; remove unused
variables, cast to avoid conversion confusion
07-Jun-04 JAD Complete function prototypes of forward declarations.
Repair broken prototypes of vh_rd() and vh_wr()
Explicitly size integer declarations
4-Jun-04 JAD Preliminary code: If operating in a PDP-11 Unibus
environment, force DHU mode
29-May-04 JAD Make certain RX.TIMER is within allowable range
25-May-04 JAD All time-based operations are scaled by tmxr_poll units
23-May-04 JAD Change to fifo_get() and dq_tx_report() to avoid
gratuitous stack manipulation
20-May-04 JAD Made modem control and auto-hangup unit flags
19-May-04 JAD Fix problem with modem status where the line number
was not being included
12-May-04 JAD Revised for updated tmxr interfaces
28-Jan-04 JAD Original creation and testing
I/O Page Registers
CSR 17 760 440 (float)
Vector: 300 (float)
Priority: BR4
Rank: 32
*/
/* MANY constants needed! */
#if defined (VM_VAX)
#include "vax_defs.h"
extern int32 int_req[IPL_HLVL];
#endif
#if defined (VM_PDP11)
#include "pdp11_defs.h"
extern int32 int_req[IPL_HLVL];
extern uint32 cpu_opt;
#endif
#include "sim_sock.h"
#include "sim_tmxr.h"
/* imports from pdp11_stddev.c: */
extern int32 tmxr_poll, clk_tps;
/* convert ms to SIMH time units based on tmxr_poll polls per second */
#define MS2SIMH(ms) (((ms) * clk_tps) / 1000)
#ifndef VH_MUXES
#define VH_MUXES (4)
#endif
#define VH_MNOMASK (VH_MUXES - 1)
#if defined(VM_VAX)
#if VEC_QBUS
#define VH_LINES (8)
#else
#define VH_LINES (16)
#endif
#else
#define VH_LINES (UNIBUS?16:8)
#endif
#define VH_LINES_ALLOC 16
#define UNIT_V_MODEDHU (UNIT_V_UF + 0)
#define UNIT_V_FASTDMA (UNIT_V_UF + 1)
#define UNIT_V_MODEM (UNIT_V_UF + 2)
#define UNIT_V_HANGUP (UNIT_V_UF + 3)
#define UNIT_MODEDHU (1 << UNIT_V_MODEDHU)
#define UNIT_FASTDMA (1 << UNIT_V_FASTDMA)
#define UNIT_MODEM (1 << UNIT_V_MODEM)
#define UNIT_HANGUP (1 << UNIT_V_HANGUP)
/* VHCSR - 160440 - Control and Status Register */
#define CSR_M_IND_ADDR (017)
#define CSR_SKIP (1 << 4)
#define CSR_MASTER_RESET (1 << 5)
#define CSR_RXIE (1 << 6)
#define CSR_RX_DATA_AVAIL (1 << 7)
#define CSR_M_TX_LINE (017)
#define CSR_V_TX_LINE (8)
#define CSR_TX_DMA_ERR (1 << 12)
#define CSR_DIAG_FAIL (1 << 13)
#define CSR_TXIE (1 << 14)
#define CSR_TX_ACTION (1 << 15)
#define CSR_GETCHAN(x) ((x) & CSR_M_IND_ADDR)
#define CSR_RW \
(CSR_TXIE|CSR_RXIE|CSR_SKIP|CSR_M_IND_ADDR|CSR_MASTER_RESET)
#define RESET_ABORT (052525)
/* Receive Buffer (RBUF) */
#define FIFO_SIZE (256)
#define FIFO_ALARM (191)
#define FIFO_HALF (FIFO_SIZE / 2)
#define RBUF_M_RX_CHAR (0377)
#define RBUF_M_RX_LINE (07)
#define RBUF_V_RX_LINE (8)
#define RBUF_PARITY_ERR (1 << 12)
#define RBUF_FRAME_ERR (1 << 13)
#define RBUF_OVERRUN_ERR (1 << 14)
#define RBUF_DATA_VALID (1 << 15)
#define RBUF_GETLINE(x) (((x) >> RBUF_V_RX_LINE) & RBUF_M_RX_LINE)
#define RBUF_PUTLINE(x) ((x) << RBUF_V_RX_LINE)
#define RBUF_DIAG \
(RBUF_PARITY_ERR|RBUF_FRAME_ERR|RBUF_OVERRUN_ERR)
#define XON (021)
#define XOFF (023)
/* Transmit Character Register (TXCHAR) */
#define TXCHAR_M_CHAR (0377)
#define TXCHAR_TX_DATA_VALID (1 << 15)
/* Receive Timer Register (RXTIMER) */
#define RXTIMER_M_RX_TIMER (0377)
/* Line-Parameter Register (LPR) */
#define LPR_DISAB_XRPT (1 << 0) /* not impl. in real DHU */
#define LPR_V_DIAG (1)
#define LPR_M_DIAG (03)
#define LPR_V_CHAR_LGTH (3)
#define LPR_M_CHAR_LGTH (03)
#define LPR_PARITY_ENAB (1 << 5)
#define LPR_EVEN_PARITY (1 << 6)
#define LPR_STOP_CODE (1 << 7)
#define LPR_V_RX_SPEED (8)
#define LPR_M_RX_SPEED (017)
#define LPR_V_TX_SPEED (12)
#define LPR_M_TX_SPEED (017)
#define RATE_50 (0)
#define RATE_75 (1)
#define RATE_110 (2)
#define RATE_134 (3)
#define RATE_150 (4)
#define RATE_300 (5)
#define RATE_600 (6)
#define RATE_1200 (7)
#define RATE_1800 (8)
#define RATE_2000 (9)
#define RATE_2400 (10)
#define RATE_4800 (11)
#define RATE_7200 (12)
#define RATE_9600 (13)
#define RATE_19200 (14)
#define RATE_38400 (15)
/* Line-Status Register (STAT) */
#define STAT_DHUID (1 << 8) /* mode: 0=DHV, 1=DHU */
#define STAT_MDL (1 << 9) /* always 0, has modem support */
#define STAT_CTS (1 << 11) /* CTS from modem */
#define STAT_DCD (1 << 12) /* DCD from modem */
#define STAT_RI (1 << 13) /* RI from modem */
#define STAT_DSR (1 << 15) /* DSR from modem */
/* FIFO Size Register (FIFOSIZE) */
#define FIFOSIZE_M_SIZE (0377)
/* FIFO Data Register (FIFODATA) */
#define FIFODATA_W0 (0377)
#define FIFODATA_V_W1 (8)
#define FIFODATA_M_W1 (0377)
/* Line-Control Register (LNCTRL) */
#define LNCTRL_TX_ABORT (1 << 0)
#define LNCTRL_IAUTO (1 << 1)
#define LNCTRL_RX_ENA (1 << 2)
#define LNCTRL_BREAK (1 << 3)
#define LNCTRL_OAUTO (1 << 4)
#define LNCTRL_FORCE_XOFF (1 << 5)
#define LNCTRL_V_MAINT (6)
#define LNCTRL_M_MAINT (03)
#define LNCTRL_LINK_TYPE (1 << 8) /* 0=data leads only, 1=modem */
#define LNCTRL_DTR (1 << 9) /* DTR to modem */
#define LNCTRL_RTS (1 << 12) /* RTS to modem */
/* Transmit Buffer Address Register Number 1 (TBUFFAD1) */
/* Transmit Buffer Address Register Number 2 (TBUFFAD2) */
#define TB2_M_TBUFFAD (077)
#define TB2_TX_DMA_START (1 << 7)
#define TB2_TX_ENA (1 << 15)
/* Transmit DMA Buffer Counter (TBUFFCT) */
/* Self-Test Error Codes */
#define SELF_NULL (0201)
#define SELF_SKIP (0203)
#define SELF_OCT (0211)
#define SELF_RAM (0225)
#define SELF_RCD (0231)
#define SELF_DRD (0235)
#define BMP_OK (0305)
#define BMP_BAD (0307)
/* Loopback types */
#define LOOP_NONE (0)
#define LOOP_H325 (1)
#define LOOP_H3101 (2) /* p.2-13 DHQ manual */
/* Local storage */
static uint16 vh_csr[VH_MUXES] = { 0 }; /* CSRs */
static uint16 vh_timer[VH_MUXES] = { 1 }; /* controller timeout */
static uint16 vh_mcount[VH_MUXES] = { 0 };
static uint32 vh_timeo[VH_MUXES] = { 0 };
static uint32 vh_ovrrun[VH_MUXES] = { 0 }; /* line overrun bits */
/* XOFF'd channels, one bit/channel */
static uint32 vh_stall[VH_MUXES] = { 0 };
static uint16 vh_loop[VH_MUXES] = { 0 }; /* loopback status */
/* One bit per controller: */
static uint32 vh_rxi = 0; /* rcv interrupts */
static uint32 vh_txi = 0; /* xmt interrupts */
static uint32 vh_crit = 0; /* FIFO.CRIT */
static const int32 bitmask[4] = { 037, 077, 0177, 0377 };
/* RX FIFO state */
static int32 rbuf_idx[VH_MUXES] = { 0 };/* index into vh_rbuf */
static uint32 vh_rbuf[VH_MUXES][FIFO_SIZE] = { { 0 } };
/* TXQ state */
#define TXQ_SIZE (16)
static int32 txq_idx[VH_MUXES] = { 0 };
static uint32 vh_txq[VH_MUXES][TXQ_SIZE] = { { 0 } };
/* Need to extend the TMLN structure */
typedef struct {
TMLN *tmln;
uint16 lpr; /* line parameters */
uint16 lnctrl; /* line control */
uint16 lstat; /* line modem status */
uint16 tbuffct; /* remaining character count */
uint16 tbuf1;
uint16 tbuf2;
uint16 txchar; /* single character I/O */
} TMLX;
static TMLN vh_ldsc[VH_MUXES * VH_LINES_ALLOC] = { { 0 } };
static TMXR vh_desc = { VH_MUXES * VH_LINES_ALLOC, 0, 0, vh_ldsc };
static TMLX vh_parm[VH_MUXES * VH_LINES_ALLOC] = { { 0 } };
/* debugging bitmaps */
#define DBG_REG 0x0001 /* trace read/write registers */
#define DBG_INT 0x0002 /* display transfer requests */
#define DBG_XMT TMXR_DBG_XMT /* display Transmitted Data */
#define DBG_RCV TMXR_DBG_RCV /* display Received Data */
#define DBG_TRC TMXR_DBG_TRC /* display trace routine calls */
#define DBG_ASY TMXR_DBG_ASY /* display Asynchronous Activities */
DEBTAB vh_debug[] = {
{"REG", DBG_REG},
{"INT", DBG_INT},
{"XMT", DBG_XMT},
{"RCV", DBG_RCV},
{"TRC", DBG_TRC},
{"ASY", DBG_ASY},
{0}
};
/* Forward references */
static t_stat vh_rd (int32 *data, int32 PA, int32 access);
static t_stat vh_wr (int32 data, int32 PA, int32 access);
static t_stat vh_svc (UNIT *uptr);
static int32 vh_rxinta (void);
static int32 vh_txinta (void);
static t_stat vh_clear (int32 vh, t_bool flag);
static t_stat vh_reset (DEVICE *dptr);
static t_stat vh_attach (UNIT *uptr, char *cptr);
static t_stat vh_detach (UNIT *uptr);
static t_stat vh_show_detail (FILE *st, UNIT *uptr, int32 val, void *desc);
static t_stat vh_show_rbuf (FILE *st, UNIT *uptr, int32 val, void *desc);
static t_stat vh_show_txq (FILE *st, UNIT *uptr, int32 val, void *desc);
static t_stat vh_putc (int32 vh, TMLX *lp, int32 chan, int32 data);
static void doDMA (int32 vh, int32 chan);
static t_stat vh_setmode (UNIT *uptr, int32 val, char *cptr, void *desc);
static t_stat vh_show_vec (FILE *st, UNIT *uptr, int32 val, void *desc);
static t_stat vh_setnl (UNIT *uptr, int32 val, char *cptr, void *desc);
static t_stat vh_set_log (UNIT *uptr, int32 val, char *cptr, void *desc);
static t_stat vh_set_nolog (UNIT *uptr, int32 val, char *cptr, void *desc);
static t_stat vh_show_log (FILE *st, UNIT *uptr, int32 val, void *desc);
/* SIMH I/O Structures */
#define IOLN_VH 020
static DIB vh_dib = {
IOBA_FLOAT,
IOLN_VH * VH_MUXES,
&vh_rd, /* read */
&vh_wr, /* write */
2, /* # of vectors */
IVCL (VHRX),
VEC_FLOAT,
{ &vh_rxinta, &vh_txinta } /* int. ack. routines */
};
static UNIT vh_unit[VH_MUXES] = {
{ UDATA (&vh_svc, UNIT_IDLE|UNIT_ATTABLE, 0) },
};
static const REG vh_reg[] = {
{ BRDATA (CSR, vh_csr, DEV_RDX, 16, VH_MUXES) },
{ GRDATA (DEVADDR, vh_dib.ba, DEV_RDX, 32, 0), REG_HRO },
{ GRDATA (DEVVEC, vh_dib.vec, DEV_RDX, 16, 0), REG_HRO },
{ NULL }
};
static const MTAB vh_mod[] = {
#if !UNIBUS
{ UNIT_MODEDHU, 0, "DHV mode", "DHV", &vh_setmode },
#endif
{ UNIT_MODEDHU, UNIT_MODEDHU, "DHU mode", "DHU", &vh_setmode },
{ UNIT_FASTDMA, 0, NULL, "NORMAL", NULL },
{ UNIT_FASTDMA, UNIT_FASTDMA, "fast DMA", "FASTDMA", NULL },
{ UNIT_MODEM, 0, NULL, "NOMODEM", NULL },
{ UNIT_MODEM, UNIT_MODEM, "modem", "MODEM", NULL },
{ UNIT_HANGUP, 0, NULL, "NOHANGUP", NULL },
{ UNIT_HANGUP, UNIT_HANGUP, "hangup", "HANGUP", NULL },
{ MTAB_XTD|MTAB_VDV, 020, "ADDRESS", "ADDRESS",
&set_addr, &show_addr, NULL },
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", "VECTOR",
&set_vec, &vh_show_vec, (void *) &vh_desc },
{ MTAB_XTD|MTAB_VDV, 0, NULL, "AUTOCONFIGURE",
&set_addr_flt, NULL, NULL },
{ MTAB_XTD|MTAB_VDV, 0, "LINES", "LINES",
&vh_setnl, &tmxr_show_lines, (void *) &vh_desc },
{ UNIT_ATT, UNIT_ATT, "summary", NULL,
NULL, &tmxr_show_summ, (void *) &vh_desc },
{ MTAB_XTD|MTAB_VDV | MTAB_NMO, 1, "CONNECTIONS", NULL,
NULL, &tmxr_show_cstat, (void *) &vh_desc },
{ MTAB_XTD|MTAB_VDV | MTAB_NMO, 0, "STATISTICS", NULL,
NULL, &tmxr_show_cstat, (void *) &vh_desc },
{ MTAB_XTD|MTAB_VDV, 1, NULL, "DISCONNECT",
&tmxr_dscln, NULL, &vh_desc },
{ MTAB_XTD|MTAB_VDV | MTAB_NMO, 0, "DETAIL", NULL,
NULL, &vh_show_detail, NULL },
{ MTAB_XTD|MTAB_VDV | MTAB_NMO, 0, "RBUF", NULL,
NULL, &vh_show_rbuf, NULL },
{ MTAB_XTD|MTAB_VDV | MTAB_NMO, 0, "TXQ", NULL,
NULL, &vh_show_txq, NULL },
{ MTAB_XTD|MTAB_VDV | MTAB_NC, 0, NULL, "LOG",
&vh_set_log, NULL, &vh_desc },
{ MTAB_XTD|MTAB_VDV | MTAB_NC, 0, NULL, "NOLOG",
&vh_set_nolog, NULL, &vh_desc },
{ MTAB_XTD|MTAB_VDV | MTAB_NMO, 0, "LOG", NULL,
NULL, &vh_show_log, &vh_desc },
{ 0 }
};
DEVICE vh_dev = {
"VH", /* name */
vh_unit, /* units */
(REG *)vh_reg, /* registers */
(MTAB *)vh_mod, /* modifiers */
VH_MUXES, /* # units */
DEV_RDX, /* address radix */
8, /* address width */
1, /* address increment */
DEV_RDX, /* data radix */
8, /* data width */
NULL, /* examine routine */
NULL, /* deposit routine */
&vh_reset, /* reset routine */
NULL, /* boot routine */
&vh_attach, /* attach routine */
&vh_detach, /* detach routine */
(void *)&vh_dib,/* context */
DEV_FLTA | DEV_DISABLE | DEV_DIS | DEV_QBUS | DEV_UBUS | DEV_DEBUG, /* flags */
0, vh_debug
};
/* Register names for Debug tracing */
static char *vh_rd_dhv_regs[] =
{"CSR ", "RBUF ", "LPR ", "STAT ", "LNCTRL", "TBFAD1", "TBFAD2", "TBFCNT" };
static char *vh_wr_dhv_regs[] =
{"CSR ", "TXCHAR", "LPR ", "STAT ", "LNCTRL", "TBFAD1", "TBFAD2", "TBFCNT" };
static char *vh_rd_dhu_regs[] =
{"CSR ", "RBUF ", "LPR ", "FIFOSZ", "LNCTRL", "TBFAD1", "TBFAD2", "TBFCNT" };
static char *vh_wr_dhu_regs[] =
{"CSR ", "RXTIMR", "LPR ", "FIFODT", "LNCTRL", "TBFAD1", "TBFAD2", "TBFCNT" };
/* Interrupt routines */
static void vh_clr_rxint ( int32 vh )
{
vh_rxi &= ~(1 << vh);
if (vh_rxi == 0)
CLR_INT (VHRX);
else
SET_INT (VHRX);
}
static void vh_set_rxint ( int32 vh )
{
vh_rxi |= (1 << vh);
SET_INT (VHRX);
}
/* RX interrupt ack. (bus cycle) */
static int32 vh_rxinta (void)
{
int32 vh;
for (vh = 0; vh < vh_desc.lines/VH_LINES; vh++) {
if (vh_rxi & (1 << vh)) {
sim_debug(DBG_INT, &vh_dev, "vh_rzinta(vh=%d)\n", vh);
vh_clr_rxint (vh);
return (vh_dib.vec + (vh * 010));
}
}
return (0);
}
static void vh_clr_txint ( int32 vh )
{
vh_txi &= ~(1 << vh);
if (vh_txi == 0)
CLR_INT (VHTX);
else
SET_INT (VHTX);
}
static void vh_set_txint ( int32 vh )
{
vh_txi |= (1 << vh);
SET_INT (VHTX);
}
/* TX interrupt ack. (bus cycle) */
static int32 vh_txinta (void)
{
int32 vh;
for (vh = 0; vh < vh_desc.lines/VH_LINES; vh++) {
if (vh_txi & (1 << vh)) {
sim_debug(DBG_INT, &vh_dev, "vh_txinta(vh=%d)\n", vh);
vh_clr_txint (vh);
return (vh_dib.vec + 4 + (vh * 010));
}
}
return (0);
}
/* RX FIFO get/put routines */
/* return 0 on success, -1 on FIFO overflow */
static int32 fifo_put ( int32 vh,
TMLX *lp,
int32 data )
{
int32 status = 0;
if (lp == NULL)
goto override;
/* this might have to move to vh_getc() */
if ((lp->lnctrl & LNCTRL_OAUTO) && ((data & RBUF_DIAG) == 0)) {
TMLX *l0p;
/* implement transmitted data flow control */
switch (data & 0377) {
case XON:
lp->tbuf2 |= TB2_TX_ENA;
goto common;
case XOFF:
lp->tbuf2 &= ~TB2_TX_ENA;
common:
/* find line 0 for this controller */
l0p = &vh_parm[vh * VH_LINES];
if (l0p->lpr & LPR_DISAB_XRPT)
return (0);
break;
default:
break;
}
}
/* BUG: which of the following 2 is correct? */
/* if ((data & RBUF_DIAG) == RBUF_DIAG) */
if (data & RBUF_DIAG)
goto override;
if (((lp->lnctrl >> LNCTRL_V_MAINT) & LNCTRL_M_MAINT) == 2)
goto override;
if (!(lp->lnctrl & LNCTRL_RX_ENA))
return (0);
override:
vh_csr[vh] |= CSR_RX_DATA_AVAIL;
if (rbuf_idx[vh] < FIFO_SIZE) {
vh_rbuf[vh][rbuf_idx[vh]] = data;
rbuf_idx[vh] += 1;
} else {
vh_ovrrun[vh] |= (1 << RBUF_GETLINE (data));
status = -1;
}
if (vh_csr[vh] & CSR_RXIE) {
if (vh_unit[vh].flags & UNIT_MODEDHU) {
/* was it a modem status change? */
if ((data & RBUF_DIAG) == RBUF_DIAG)
vh_set_rxint (vh);
/* look for FIFO alarm @ 3/4 full */
else if (rbuf_idx[vh] == FIFO_ALARM)
vh_set_rxint (vh);
else if (vh_timer[vh] == 0)
; /* nothing, infinite timeout */
else if (vh_timer[vh] == 1)
vh_set_rxint (vh);
else if (vh_timeo[vh] == 0)
vh_timeo[vh] = MS2SIMH (vh_timer[vh]) + 1;
} else {
/* Interrupt on transition _from_ an empty FIFO */
if (rbuf_idx[vh] == 1)
vh_set_rxint (vh);
}
}
if (rbuf_idx[vh] > FIFO_ALARM)
vh_crit |= (1 << vh);
/* Implement RX FIFO-level flow control */
if (lp != NULL) {
if ((lp->lnctrl & LNCTRL_FORCE_XOFF) ||
((vh_crit & (1 << vh)) && (lp->lnctrl & LNCTRL_IAUTO))) {
int32 chan = RBUF_GETLINE(data);
vh_stall[vh] ^= (1 << chan);
/* send XOFF every other character received */
if (vh_stall[vh] & (1 << chan))
vh_putc (vh, lp, chan, XOFF);
}
}
return (status);
}
static int32 fifo_get ( int32 vh )
{
int32 data, i;
if (rbuf_idx[vh] == 0) {
vh_csr[vh] &= ~CSR_RX_DATA_AVAIL;
return (0);
}
/* pick off the first character, mark valid */
data = vh_rbuf[vh][0] | RBUF_DATA_VALID;
/* move the remainder up */
rbuf_idx[vh] -= 1;
for (i = 0; i < rbuf_idx[vh]; i++)
vh_rbuf[vh][i] = vh_rbuf[vh][i + 1];
/* rbuf_idx[vh] -= 1; */
/* look for any previous overruns */
if (vh_ovrrun[vh]) {
for (i = 0; i < VH_LINES; i++) {
if (vh_ovrrun[vh] & (1 << i)) {
fifo_put (vh, NULL, RBUF_OVERRUN_ERR |
RBUF_PUTLINE (i));
vh_ovrrun[vh] &= ~(1 << i);
break;
}
}
}
/* recompute FIFO alarm condition */
if ((rbuf_idx[vh] < FIFO_HALF) && (vh_crit & (1 << vh))) {
vh_crit &= ~(1 << vh);
/* send XON to all XOFF'd channels on this controller */
for (i = 0; i < VH_LINES; i++) {
TMLX *lp = &vh_parm[(vh * VH_LINES) + i];
if (lp->lnctrl & LNCTRL_FORCE_XOFF)
continue;
if (vh_stall[vh] & (1 << i)) {
vh_putc (vh, NULL, i, XON);
vh_stall[vh] &= ~(1 << i);
}
}
}
return (data & 0177777);
}
/* TX Q manipulation */
static int32 dq_tx_report ( int32 vh )
{
int32 data, i;
if (txq_idx[vh] == 0)
return (0);
data = vh_txq[vh][0];
txq_idx[vh] -= 1;
for (i = 0; i < txq_idx[vh]; i++)
vh_txq[vh][i] = vh_txq[vh][i + 1];
/* txq_idx[vh] -= 1; */
return (data & 0177777);
}
static void q_tx_report ( int32 vh,
int32 data )
{
if (vh_csr[vh] & CSR_TXIE)
vh_set_txint (vh);
if (txq_idx[vh] >= TXQ_SIZE) {
/* BUG: which of the following 2 is correct? */
dq_tx_report (vh);
/* return; */
}
vh_txq[vh][txq_idx[vh]] = CSR_TX_ACTION | data;
txq_idx[vh] += 1;
}
/* Channel get/put routines */
static void HangupModem ( int32 vh,
TMLX *lp,
int32 chan )
{
if (vh_unit[vh].flags & UNIT_MODEM)
lp->lstat &= ~(STAT_DCD|STAT_DSR|STAT_CTS|STAT_RI);
if (lp->lnctrl & LNCTRL_LINK_TYPE)
/* RBUF<0> = 0 for modem status */
fifo_put (vh, lp, RBUF_DIAG |
RBUF_PUTLINE (chan) |
((lp->lstat >> 8) & 0376));
/* BUG: check for overflow above */
}
/* TX a character on a line, regardless of the TX enable state */
static t_stat vh_putc ( int32 vh,
TMLX *lp,
int32 chan,
int32 data )
{
int32 val;
t_stat status = SCPE_OK;
/* truncate to desired character length */
data &= bitmask[(lp->lpr >> LPR_V_CHAR_LGTH) & LPR_M_CHAR_LGTH];
switch ((lp->lnctrl >> LNCTRL_V_MAINT) & LNCTRL_M_MAINT) {
case 0: /* normal */
#if 0
/* check for (external) loopback setting */
switch (vh_loop[vh]) {
default:
case LOOP_NONE:
break;
}
#endif
status = tmxr_putc_ln (lp->tmln, data);
if (status == SCPE_LOST) {
tmxr_reset_ln (lp->tmln);
HangupModem (vh, lp, chan);
} else if (status == SCPE_STALL) {
/* let's flush and try again */
tmxr_send_buffered_data (lp->tmln);
status = tmxr_putc_ln (lp->tmln, data);
}
break;
case 1: /* auto echo */
break;
case 2: /* local loopback */
if (lp->lnctrl & LNCTRL_BREAK)
val = fifo_put (vh, lp,
RBUF_FRAME_ERR | RBUF_PUTLINE (chan));
else
val = fifo_put (vh, lp,
RBUF_PUTLINE (chan) | data);
status = (val < 0) ? SCPE_TTMO : SCPE_OK;
break;
default: /* remote loopback */
break;
}
return (status);
}
/* Retrieve all stored input from TMXR and place in RX FIFO */
static void vh_getc ( int32 vh )
{
uint32 i, c;
TMLX *lp;
for (i = 0; i < (uint32)VH_LINES; i++) {
lp = &vh_parm[(vh * VH_LINES) + i];
while ((c = tmxr_getc_ln (lp->tmln)) != 0) {
if (c & SCPE_BREAK) {
fifo_put (vh, lp,
RBUF_FRAME_ERR | RBUF_PUTLINE (i));
/* BUG: check for overflow above */
} else {
c &= bitmask[(lp->lpr >> LPR_V_CHAR_LGTH) &
LPR_M_CHAR_LGTH];
fifo_put (vh, lp, RBUF_PUTLINE (i) | c);
/* BUG: check for overflow above */
}
}
}
}
/* I/O dispatch routines */
static t_stat vh_rd ( int32 *data,
int32 PA,
int32 access )
{
int32 vh = ((PA - vh_dib.ba) >> 4) & VH_MNOMASK, line;
TMLX *lp;
switch ((PA >> 1) & 7) {
case 0: /* CSR */
*data = vh_csr[vh] | dq_tx_report (vh);
vh_csr[vh] &= ~0117400; /* clear the read-once bits */
break;
case 1: /* RBUF */
*data = fifo_get (vh);
break;
case 2: /* LPR */
if (CSR_GETCHAN (vh_csr[vh]) >= VH_LINES) {
*data = 0;
break;
}
line = (vh * VH_LINES) + CSR_GETCHAN (vh_csr[vh]);
lp = &vh_parm[line];
*data = lp->lpr;
break;
case 3: /* STAT/FIFOSIZE */
if (CSR_GETCHAN (vh_csr[vh]) >= VH_LINES) {
*data = 0;
break;
}
line = (vh * VH_LINES) + CSR_GETCHAN (vh_csr[vh]);
lp = &vh_parm[line];
*data = (lp->lstat & ~0377) | /* modem status */
#if 0
(64 - tmxr_tqln (lp->tmln));
fprintf (stderr, "\rtqln %d\n", 64 - tmxr_tqln (lp->tmln));
#else
64;
#endif
break;
case 4: /* LNCTRL */
if (CSR_GETCHAN (vh_csr[vh]) >= VH_LINES) {
*data = 0;
break;
}
line = (vh * VH_LINES) + CSR_GETCHAN (vh_csr[vh]);
lp = &vh_parm[line];
*data = lp->lnctrl;
break;
case 5: /* TBUFFAD1 */
if (CSR_GETCHAN (vh_csr[vh]) >= VH_LINES) {
*data = 0;
break;
}
line = (vh * VH_LINES) + CSR_GETCHAN (vh_csr[vh]);
lp = &vh_parm[line];
*data = lp->tbuf1;
break;
case 6: /* TBUFFAD2 */
if (CSR_GETCHAN (vh_csr[vh]) >= VH_LINES) {
*data = 0;
break;
}
line = (vh * VH_LINES) + CSR_GETCHAN (vh_csr[vh]);
lp = &vh_parm[line];
*data = lp->tbuf2;
break;
case 7: /* TBUFFCT */
if (CSR_GETCHAN (vh_csr[vh]) >= VH_LINES) {
*data = 0;
break;
}
line = (vh * VH_LINES) + CSR_GETCHAN (vh_csr[vh]);
lp = &vh_parm[line];
*data = lp->tbuffct;
break;
default:
/* can't happen */
break;
}
sim_debug(DBG_REG, &vh_dev, "vh_rd(PA=0x%08X [%s], access=%d, data=0x%X)\n", PA,
((vh_unit[vh].flags & UNIT_MODEDHU) ? vh_rd_dhu_regs : vh_rd_dhv_regs)[(PA >> 1) & 07], access, data);
return (SCPE_OK);
}
static t_stat vh_wr ( int32 data,
int32 PA,
int32 access )
{
int32 vh = ((PA - vh_dib.ba) >> 4) & VH_MNOMASK, line;
TMLX *lp;
sim_debug(DBG_REG, &vh_dev, "vh_wr(PA=0x%08X [%s], access=%d, data=0x%X)\n", PA,
((vh_unit[vh].flags & UNIT_MODEDHU) ? vh_wr_dhu_regs : vh_wr_dhv_regs)[(PA >> 1) & 07], access, data);
switch ((PA >> 1) & 7) {
case 0: /* CSR, but no read-modify-write */
if (access == WRITEB)
data = (PA & 1) ?
(vh_csr[vh] & 0377) | (data << 8) :
(vh_csr[vh] & ~0377) | (data & 0377);
if (data & CSR_MASTER_RESET) {
if ((vh_unit[vh].flags & UNIT_MODEDHU) && (data & CSR_SKIP))
data &= ~CSR_MASTER_RESET;
if (vh == 0) /* Only start unit service on the first unit. Units are polled there */
sim_activate (&vh_unit[vh], clk_cosched (tmxr_poll));
/* vh_mcount[vh] = 72; */ /* 1.2 seconds */
vh_mcount[vh] = MS2SIMH (1200); /* 1.2 seconds */
}
if ((data & CSR_RXIE) == 0)
vh_clr_rxint (vh);
/* catch the RXIE transition if the FIFO is not empty */
else if (((vh_csr[vh] & CSR_RXIE) == 0) &&
(rbuf_idx[vh] != 0)) {
if (vh_unit[vh].flags & UNIT_MODEDHU) {
if (rbuf_idx[vh] > FIFO_ALARM)
vh_set_rxint (vh);
else if (vh_timer[vh] == 0)
;
else if (vh_timer[vh] == 1)
vh_set_rxint (vh);
else if (vh_timeo[vh] == 0)
vh_timeo[vh] = MS2SIMH (vh_timer[vh]) + 1;
} else {
vh_set_rxint (vh);
}
}
if ((data & CSR_TXIE) == 0)
vh_clr_txint (vh);
else if (((vh_csr[vh] & CSR_TXIE) == 0) &&
(txq_idx[vh] != 0))
vh_set_txint (vh);
vh_csr[vh] = (vh_csr[vh] & ~((uint16) CSR_RW)) | (data & (uint16) CSR_RW);
break;
case 1: /* TXCHAR/RXTIMER */
if (CSR_GETCHAN (vh_csr[vh]) >= VH_LINES)
break;
if ((data == RESET_ABORT) && (vh_csr[vh] & CSR_MASTER_RESET)) {
vh_mcount[vh] = 1;
break;
}
if (vh_unit[vh].flags & UNIT_MODEDHU) {
if (CSR_GETCHAN (vh_csr[vh]) != 0)
break;
if (access == WRITEB)
data = (PA & 1) ?
(vh_timer[vh] & 0377) | (data << 8) :
(vh_timer[vh] & ~0377) | (data & 0377);
vh_timer[vh] = data & 0377;
#if 0
if (vh_csr[vh] & CSR_RXIE) {
if (rbuf_idx[vh] > FIFO_ALARM)
vh_set_rxint (vh);
else if (vh_timer[vh] == 0)
;
else if (vh_timer[vh] == 1)
vh_set_rxint (vh);
else if (vh_timeo[vh] == 0)
vh_timeo[vh] = MS2SIMH (vh_timer[vh]) + 1;
}
#endif
} else {
line = (vh * VH_LINES) + CSR_GETCHAN (vh_csr[vh]);
lp = &vh_parm[line];
if (access == WRITEB)
data = (PA & 1) ?
(lp->txchar & 0377) | (data << 8) :
(lp->txchar & ~0377) | (data & 0377);
lp->txchar = data; /* TXCHAR */
if (lp->txchar & TXCHAR_TX_DATA_VALID) {
if (lp->tbuf2 & TB2_TX_ENA)
vh_putc (vh, lp,
CSR_GETCHAN (vh_csr[vh]),
lp->txchar);
q_tx_report (vh,
CSR_GETCHAN (vh_csr[vh]) << CSR_V_TX_LINE);
lp->txchar &= ~TXCHAR_TX_DATA_VALID;
}
}
break;
case 2: /* LPR */
if ((data == RESET_ABORT) && (vh_csr[vh] & CSR_MASTER_RESET)) {
vh_mcount[vh] = 1;
break;
}
if (CSR_GETCHAN (vh_csr[vh]) >= VH_LINES)
break;
line = (vh * VH_LINES) + CSR_GETCHAN (vh_csr[vh]);
lp = &vh_parm[line];
if (access == WRITEB)
data = (PA & 1) ?
(lp->lpr & 0377) | (data << 8) :
(lp->lpr & ~0377) | (data & 0377);
/* Modify only if CSR<3:0> == 0 */
if (CSR_GETCHAN (vh_csr[vh]) != 0)
data &= ~LPR_DISAB_XRPT;
lp->lpr = data;
if (((lp->lpr >> LPR_V_DIAG) & LPR_M_DIAG) == 1) {
fifo_put (vh, lp,
RBUF_DIAG |
RBUF_PUTLINE (CSR_GETCHAN (vh_csr[vh])) |
BMP_OK);
/* BUG: check for overflow above */
lp->lpr &= ~(LPR_M_DIAG << LPR_V_DIAG);
}
break;
case 3: /* STAT/FIFODATA */
if ((data == RESET_ABORT) && (vh_csr[vh] & CSR_MASTER_RESET)) {
vh_mcount[vh] = 1;
break;
}
if (CSR_GETCHAN (vh_csr[vh]) >= VH_LINES)
break;
line = (vh * VH_LINES) + CSR_GETCHAN (vh_csr[vh]);
lp = &vh_parm[line];
if (vh_unit[vh].flags & UNIT_MODEDHU) {
/* high byte writes not allowed */
if (PA & 1)
break;
/* transmit 1 or 2 characters */
if (!(lp->tbuf2 & TB2_TX_ENA))
break;
vh_putc (vh, lp, CSR_GETCHAN (vh_csr[vh]), data);
q_tx_report (vh, CSR_GETCHAN (vh_csr[vh]) << CSR_V_TX_LINE);
if (access != WRITEB)
vh_putc (vh, lp, CSR_GETCHAN (vh_csr[vh]),
data >> 8);
}
break;
case 4: /* LNCTRL */
if ((data == RESET_ABORT) && (vh_csr[vh] & CSR_MASTER_RESET)) {
vh_mcount[vh] = 1;
break;
}
if (CSR_GETCHAN (vh_csr[vh]) >= VH_LINES)
break;
line = (vh * VH_LINES) + CSR_GETCHAN (vh_csr[vh]);
lp = &vh_parm[line];
if (access == WRITEB)
data = (PA & 1) ?
(lp->lnctrl & 0377) | (data << 8) :
(lp->lnctrl & ~0377) | (data & 0377);
/* catch the abort TX transition */
if (!(lp->lnctrl & LNCTRL_TX_ABORT) &&
(data & LNCTRL_TX_ABORT)) {
if ((lp->tbuf2 & TB2_TX_ENA) &&
(lp->tbuf2 & TB2_TX_DMA_START)) {
lp->tbuf2 &= ~TB2_TX_DMA_START;
q_tx_report (vh, CSR_GETCHAN (vh_csr[vh]) << CSR_V_TX_LINE);
}
}
/* Implement program-initiated flow control */
if ( (data & LNCTRL_FORCE_XOFF) &&
!(lp->lnctrl & LNCTRL_FORCE_XOFF) ) {
if (!(lp->lnctrl & LNCTRL_IAUTO))
vh_putc (vh, lp, CSR_GETCHAN (vh_csr[vh]), XOFF);
} else if ( !(data & LNCTRL_FORCE_XOFF) &&
(lp->lnctrl & LNCTRL_FORCE_XOFF) ) {
if (!(lp->lnctrl & LNCTRL_IAUTO))
vh_putc (vh, lp, CSR_GETCHAN (vh_csr[vh]), XON);
else if (!(vh_crit & (1 << vh)) &&
(vh_stall[vh] & (1 << CSR_GETCHAN (vh_csr[vh]))))
vh_putc (vh, lp, CSR_GETCHAN (vh_csr[vh]), XON);
}
if ( (data & LNCTRL_IAUTO) && /* IAUTO 0->1 */
!(lp->lnctrl & LNCTRL_IAUTO) ) {
if (!(lp->lnctrl & LNCTRL_FORCE_XOFF)) {
if (vh_crit & (1 << vh)) {
vh_putc (vh, lp,
CSR_GETCHAN (vh_csr[vh]), XOFF);
vh_stall[vh] |= (1 << CSR_GETCHAN (vh_csr[vh]));
}
} else {
/* vh_stall[vh] |= (1 << CSR_GETCHAN (vh_csr[vh])) */;
}
} else if ( !(data & LNCTRL_IAUTO) &&
(lp->lnctrl & LNCTRL_IAUTO) ) {
if (!(lp->lnctrl & LNCTRL_FORCE_XOFF))
vh_putc (vh, lp, CSR_GETCHAN (vh_csr[vh]), XON);
}
/* check modem control bits */
if ( !(data & LNCTRL_DTR) && /* DTR 1->0 */
(lp->lnctrl & LNCTRL_DTR)) {
if ((lp->tmln->conn) && (vh_unit[vh].flags & UNIT_HANGUP)) {
tmxr_linemsg (lp->tmln, "\r\nLine hangup\r\n");
tmxr_reset_ln (lp->tmln);
}
HangupModem (vh, lp, CSR_GETCHAN (vh_csr[vh]));
}
lp->lnctrl = data;
lp->tmln->rcve = (data & LNCTRL_RX_ENA) ? 1 : 0;
tmxr_poll_rx (&vh_desc);
vh_getc (vh);
if (lp->lnctrl & LNCTRL_BREAK)
vh_putc (vh, lp, CSR_GETCHAN (vh_csr[vh]), 0);
break;
case 5: /* TBUFFAD1 */
if ((data == RESET_ABORT) && (vh_csr[vh] & CSR_MASTER_RESET)) {
vh_mcount[vh] = 1;
break;
}
if (CSR_GETCHAN (vh_csr[vh]) >= VH_LINES)
break;
line = (vh * VH_LINES) + CSR_GETCHAN (vh_csr[vh]);
lp = &vh_parm[line];
if (access == WRITEB)
data = (PA & 1) ?
(lp->tbuf1 & 0377) | (data << 8) :
(lp->tbuf1 & ~0377) | (data & 0377);
lp->tbuf1 = data;
break;
case 6: /* TBUFFAD2 */
if ((data == RESET_ABORT) && (vh_csr[vh] & CSR_MASTER_RESET)) {
vh_mcount[vh] = 1;
break;
}
if (CSR_GETCHAN (vh_csr[vh]) >= VH_LINES)
break;
line = (vh * VH_LINES) + CSR_GETCHAN (vh_csr[vh]);
lp = &vh_parm[line];
if (access == WRITEB)
data = (PA & 1) ?
(lp->tbuf2 & 0377) | (data << 8) :
(lp->tbuf2 & ~0377) | (data & 0377);
lp->tbuf2 = data;
/* if starting a DMA, clear DMA_ERR */
if (vh_unit[vh].flags & UNIT_FASTDMA) {
doDMA (vh, CSR_GETCHAN (vh_csr[vh]));
tmxr_send_buffered_data (lp->tmln);
}
break;
case 7: /* TBUFFCT */
if ((data == RESET_ABORT) && (vh_csr[vh] & CSR_MASTER_RESET)) {
vh_mcount[vh] = 1;
break;
}
if (CSR_GETCHAN (vh_csr[vh]) >= VH_LINES)
break;
line = (vh * VH_LINES) + CSR_GETCHAN (vh_csr[vh]);
lp = &vh_parm[line];
if (access == WRITEB)
data = (PA & 1) ?
(lp->tbuffct & 0377) | (data << 8) :
(lp->tbuffct & ~0377) | (data & 0377);
lp->tbuffct = data;
break;
default:
/* can't happen */
break;
}
return (SCPE_OK);
}
static void doDMA ( int32 vh,
int32 chan )
{
int32 line, status;
uint32 pa;
TMLX *lp;
line = (vh * VH_LINES) + chan;
lp = &vh_parm[line];
if ((lp->tbuf2 & TB2_TX_ENA) && (lp->tbuf2 & TB2_TX_DMA_START)) {
/* BUG: should compare against available xmit buffer space */
pa = lp->tbuf1;
pa |= (lp->tbuf2 & TB2_M_TBUFFAD) << 16;
status = chan << CSR_V_TX_LINE;
while (lp->tbuffct) {
uint8 buf;
if (Map_ReadB (pa, 1, &buf)) {
status |= CSR_TX_DMA_ERR;
lp->tbuffct = 0;
break;
}
if (vh_putc (vh, lp, chan, buf) != SCPE_OK)
break;
/* pa = (pa + 1) & PAMASK; */
pa = (pa + 1) & ((1 << 22) - 1);
lp->tbuffct--;
}
lp->tbuf1 = pa & 0177777;
lp->tbuf2 = (lp->tbuf2 & ~TB2_M_TBUFFAD) |
((pa >> 16) & TB2_M_TBUFFAD);
if (lp->tbuffct == 0) {
lp->tbuf2 &= ~TB2_TX_DMA_START;
q_tx_report (vh, status);
}
}
}
/* Perform many of the functions of PROC2 */
static t_stat vh_svc ( UNIT *uptr )
{
int32 vh, newln, i;
/* scan all muxes for countdown reset */
for (vh = 0; vh < vh_desc.lines/VH_LINES; vh++) {
if (vh_csr[vh] & CSR_MASTER_RESET) {
if (vh_mcount[vh] != 0)
vh_mcount[vh] -= 1;
else
vh_clear (vh, FALSE);
}
}
/* sample every 10ms for modem changes (new connections) */
newln = tmxr_poll_conn (&vh_desc);
if (newln >= 0) {
TMLX *lp;
int32 line;
vh = newln / VH_LINES; /* determine which mux */
line = newln - (vh * VH_LINES);
lp = &vh_parm[newln];
lp->lstat |= STAT_DSR | STAT_DCD | STAT_CTS;
if (!(lp->lnctrl & LNCTRL_DTR))
lp->lstat |= STAT_RI;
if (lp->lnctrl & LNCTRL_LINK_TYPE)
fifo_put (vh, lp, RBUF_DIAG |
RBUF_PUTLINE (line) |
((lp->lstat >> 8) & 0376));
/* BUG: should check for overflow above */
}
/* scan all muxes, lines for DMA to complete; start every 3.12ms */
for (vh = 0; vh < vh_desc.lines/VH_LINES; vh++) {
for (i = 0; i < VH_LINES; i++)
doDMA (vh, i);
}
/* interrupt driven in a real DHQ */
tmxr_poll_rx (&vh_desc);
for (vh = 0; vh < vh_desc.lines/VH_LINES; vh++)
vh_getc (vh);
tmxr_poll_tx (&vh_desc);
/* scan all DHU-mode muxes for RX FIFO timeout */
for (vh = 0; vh < vh_desc.lines/VH_LINES; vh++) {
if (vh_unit[vh].flags & UNIT_MODEDHU) {
if (vh_timeo[vh] && (vh_csr[vh] & CSR_RXIE)) {
vh_timeo[vh] -= 1;
if ((vh_timeo[vh] == 0) && rbuf_idx[vh])
vh_set_rxint (vh);
}
}
}
sim_activate (uptr, tmxr_poll); /* requeue ourselves */
return (SCPE_OK);
}
/* init a channel on a controller */
/* set for:
send/receive 9600
8 data bits
1 stop bit
no parity
parity odd
auto-flow off
RX disabled
TX enabled
no break on line
no loopback
link type set to data-leads only
DTR & RTS off
DMA character counter 0
DMA start address registers 0
TX_DMA_START 0
TX_ABORT 0
auto-flow reports enabled
FIFO size set to 64
*/
static void vh_init_chan ( int32 vh,
int32 chan )
{
int32 line;
TMLX *lp;
line = (vh * VH_LINES) + chan;
lp = &vh_parm[line];
lp->lpr = (RATE_9600 << LPR_V_TX_SPEED) |
(RATE_9600 << LPR_V_RX_SPEED) |
(03 << LPR_V_CHAR_LGTH);
lp->lnctrl = 0;
lp->lstat &= ~(STAT_MDL | STAT_DHUID | STAT_RI);
if (vh_unit[vh].flags & UNIT_MODEDHU)
lp->lstat |= STAT_DHUID | 64;
if (!(vh_unit[vh].flags & UNIT_MODEM))
lp->lstat |= STAT_DSR | STAT_DCD | STAT_CTS;
lp->tmln->xmte = 1;
lp->tmln->rcve = 0;
lp->tbuffct = 0;
lp->tbuf1 = 0;
lp->tbuf2 = TB2_TX_ENA;
lp->txchar = 0;
}
/* init a controller; flag true if BINIT, false if master.reset */
static t_stat vh_clear ( int32 vh,
t_bool flag )
{
int32 i;
txq_idx[vh] = 0;
rbuf_idx[vh] = 0;
/* put 8 diag bytes in FIFO: 6 SELF_x, 2 circuit revision codes */
if (vh_csr[vh] & CSR_SKIP) {
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(0) | SELF_SKIP);
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(1) | SELF_SKIP);
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(2) | SELF_SKIP);
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(3) | SELF_SKIP);
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(4) | SELF_SKIP);
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(5) | SELF_SKIP);
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(6) | 0107);
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(7) | 0105);
} else {
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(0) | SELF_NULL);
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(1) | SELF_NULL);
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(2) | SELF_NULL);
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(3) | SELF_NULL);
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(4) | SELF_NULL);
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(5) | SELF_NULL);
/* PROC2 ver. 1 */
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(6) | 0107);
/* PROC1 ver. 1 */
fifo_put (vh, NULL, RBUF_DIAG | RBUF_PUTLINE(7) | 0105);
}
vh_csr[vh] &= ~(CSR_TX_ACTION|CSR_DIAG_FAIL|CSR_MASTER_RESET);
if (flag)
vh_csr[vh] &= ~(CSR_TXIE|CSR_RXIE|CSR_SKIP);
vh_csr[vh] |= CSR_TX_DMA_ERR | (CSR_M_TX_LINE << CSR_V_TX_LINE);
vh_clr_rxint (vh);
vh_clr_txint (vh);
vh_timer[vh] = 1;
vh_timeo[vh] = 0;
vh_ovrrun[vh] = 0;
for (i = 0; i < VH_LINES; i++)
vh_init_chan (vh, i);
vh_crit &= ~(1 << vh);
vh_stall[vh] = 0;
vh_loop[vh] = LOOP_NONE;
return (SCPE_OK);
}
/* Reset all controllers. Used by BINIT and RESET. */
static t_stat vh_reset ( DEVICE *dptr )
{
int32 i;
if (vh_desc.lines > VH_MUXES*VH_LINES)
vh_desc.lines = VH_MUXES*VH_LINES;
for (i = 0; i < vh_desc.lines; i++)
vh_parm[i].tmln = &vh_ldsc[i];
vh_dev.numunits = (vh_desc.lines / VH_LINES);
for (i = 0; i < vh_desc.lines/VH_LINES; i++) {
/* if Unibus, force DHU mode */
if (UNIBUS)
vh_unit[i].flags |= UNIT_MODEDHU;
vh_clear (i, TRUE);
}
vh_rxi = vh_txi = 0;
CLR_INT (VHRX);
CLR_INT (VHTX);
sim_cancel (&vh_unit[0]);
return (auto_config (dptr->name, (dptr->flags & DEV_DIS) ? 0 : vh_desc.lines/VH_LINES));
}
static t_stat vh_attach ( UNIT *uptr,
char *cptr )
{
if (uptr == &vh_unit[0])
return (tmxr_attach (&vh_desc, uptr, cptr));
return (SCPE_NOATT);
}
static t_stat vh_detach ( UNIT *uptr )
{
return (tmxr_detach (&vh_desc, uptr));
}
t_stat vh_show_vec (FILE *st, UNIT *uptr, int32 arg, void *desc)
{
TMXR *mp = (TMXR *) desc;
return show_vec (st, uptr, ((mp->lines * 2) / VH_LINES), desc);
}
static void vh_detail_line ( FILE *st,
int32 vh,
int32 chan )
{
int32 line;
TMLX *lp;
line = (vh * VH_LINES) + chan;
lp = &vh_parm[line];
fprintf (st, "\tline %d\tlpr %06o, lnctrl %06o, lstat %06o\n",
chan, lp->lpr, lp->lnctrl, lp->lstat);
fprintf (st, "\t\ttbuffct %06o, tbuf1 %06o, tbuf2 %06o, txchar %06o\n",
lp->tbuffct, lp->tbuf1, lp->tbuf2, lp->txchar);
fprintf (st, "\t\ttmln rcve %d xmte %d\n",
lp->tmln->rcve, lp->tmln->xmte);
}
static t_stat vh_show_detail ( FILE *st,
UNIT *uptr,
int32 val,
void *desc )
{
int32 i, j;
fprintf (st, "VH:\trxi %d, txi %d\n", vh_rxi, vh_txi);
for (i = 0; i < vh_desc.lines/VH_LINES; i++) {
fprintf (st, "VH%d:\tmode %s, crit %d\n", i,
vh_unit[i].flags & UNIT_MODEDHU ? "DHU" : "DHV",
vh_crit & (1 << i));
fprintf (st, "\tCSR %06o, mcount %d, rbuf_idx %d, txq_idx %d\n",
vh_csr[i], vh_mcount[i], rbuf_idx[i], txq_idx[i]);
for (j = 0; j < VH_LINES; j++)
vh_detail_line (st, i, j);
}
return (SCPE_OK);
}
static t_stat vh_show_rbuf ( FILE *st,
UNIT *uptr,
int32 val,
void *desc )
{
int32 i;
for (i = 0; i < rbuf_idx[0]; i++)
fprintf (st, "%03d: %06o\n", i, vh_rbuf[0][i]);
return (SCPE_OK);
}
static t_stat vh_show_txq ( FILE *st,
UNIT *uptr,
int32 val,
void *desc )
{
int32 i;
for (i = 0; i < txq_idx[0]; i++)
fprintf (st, "%02d: %06o\n\r", i, vh_txq[0][i]);
return (SCPE_OK);
}
/* SET LINES processor */
static t_stat vh_setnl (UNIT *uptr, int32 val, char *cptr, void *desc)
{
int32 newln, i, t, ndev;
t_stat r;
if (cptr == NULL)
return SCPE_ARG;
newln = (int32) get_uint (cptr, 10, (VH_MUXES * VH_LINES), &r);
if ((r != SCPE_OK) || (newln == vh_desc.lines))
return r;
if ((newln == 0) || (newln % VH_LINES))
return SCPE_ARG;
if (newln < vh_desc.lines) {
for (i = newln, t = 0; i < vh_desc.lines; i++)
t = t | vh_ldsc[i].conn;
if (t && !get_yn ("This will disconnect users; proceed [N]?", FALSE))
return SCPE_OK;
for (i = newln; i < vh_desc.lines; i++) {
if (vh_ldsc[i].conn) {
tmxr_linemsg (&vh_ldsc[i], "\r\nOperator disconnected line\r\n");
tmxr_reset_ln (&vh_ldsc[i]); /* reset line */
}
if ((i % VH_LINES) == (VH_LINES - 1))
vh_clear (i / VH_LINES, TRUE); /* reset mux */
}
}
vh_dib.lnt = (newln / VH_LINES) * IOLN_VH; /* set length */
vh_desc.lines = newln;
ndev = ((vh_dev.flags & DEV_DIS)? 0: (vh_desc.lines / VH_LINES));
vh_dev.numunits = (newln / VH_LINES);
return auto_config (vh_dev.name, ndev); /* auto config */
}
/* SET DHU/DHV mode processor */
static t_stat vh_setmode (UNIT *uptr, int32 val, char *cptr, void *desc)
{
if (cptr)
return SCPE_ARG;
if ((UNIBUS) && (val != UNIT_MODEDHU))
return SCPE_ARG;
return SCPE_OK;
}
/* SET LOG processor */
static t_stat vh_set_log (UNIT *uptr, int32 val, char *cptr, void *desc)
{
char *tptr;
t_stat r;
int32 ln;
if (cptr == NULL)
return SCPE_ARG;
tptr = strchr (cptr, '=');
if ((tptr == NULL) || (*tptr == 0))
return SCPE_ARG;
*tptr++ = 0;
ln = (int32) get_uint (cptr, 10, (VH_MUXES * VH_LINES), &r);
if ((r != SCPE_OK) || (ln >= vh_desc.lines))
return SCPE_ARG;
return tmxr_set_log (NULL, ln, tptr, desc);
}
/* SET NOLOG processor */
static t_stat vh_set_nolog (UNIT *uptr, int32 val, char *cptr, void *desc)
{
t_stat r;
int32 ln;
if (cptr == NULL)
return SCPE_ARG;
ln = (int32) get_uint (cptr, 10, (VH_MUXES * VH_LINES), &r);
if ((r != SCPE_OK) || (ln >= vh_desc.lines))
return SCPE_ARG;
return tmxr_set_nolog (NULL, ln, NULL, desc);
}
/* SHOW LOG processor */
static t_stat vh_show_log (FILE *st, UNIT *uptr, int32 val, void *desc)
{
int32 i;
for (i = 0; i < vh_desc.lines; i++) {
fprintf (st, "line %d: ", i);
tmxr_show_log (st, NULL, i, desc);
fprintf (st, "\n");
}
return SCPE_OK;
}