| /* vax630_defs.h: MicroVAX II model-specific definitions file | |
| Copyright (c) 2009-2012, Matt Burke | |
| This module incorporates code from SimH, Copyright (c) 1998-2008, Robert M Supnik | |
| Permission is hereby granted, free of charge, to any person obtaining a | |
| copy of this software and associated documentation files (the "Software"), | |
| to deal in the Software without restriction, including without limitation | |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| and/or sell copies of the Software, and to permit persons to whom the | |
| Software is furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be included in | |
| all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| THE AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| Except as contained in this notice, the name(s) of the author(s) shall not be | |
| used in advertising or otherwise to promote the sale, use or other dealings | |
| in this Software without prior written authorization from the author(s). | |
| 08-Nov-12 MB First version | |
| This file covers the KA630 ("Mayflower") Qbus system. | |
| System memory map | |
| 0000 0000 - 00FF FFFF main memory | |
| 0100 0000 - 1FFF FFFF reserved | |
| 2000 0000 - 2000 1FFF Qbus I/O page | |
| 2004 0000 - 2004 FFFF ROM space, halt protected | |
| 2005 0000 - 2005 FFFF ROM space, halt unprotected | |
| 2008 0000 - 2008 000F Local register space | |
| 2008 8000 - 2008 FFFF Qbus mapping registers | |
| 200B 8000 - 200B 80FF Watch chip registers | |
| 3000 0000 - 303F FFFF Qbus memory space | |
| 3400 0000 - 3FFF FFFF reserved | |
| */ | |
| #ifdef FULL_VAX /* subset VAX */ | |
| #undef FULL_VAX | |
| #endif | |
| #ifndef _VAX_630_DEFS_H_ | |
| #define _VAX_630_DEFS_H_ 1 | |
| /* Microcode constructs */ | |
| #define VAX620_SID (16 << 24) /* system ID */ | |
| #define VAX630_SID (8 << 24) /* system ID */ | |
| #define CON_HLTPIN 0x0200 /* external CPU halt */ | |
| #define CON_PWRUP 0x0300 /* powerup code */ | |
| #define CON_HLTINS 0x0600 /* HALT instruction */ | |
| #define CON_DBLMCK 0x0500 /* Machine check in machine check */ | |
| #define CON_BADPSL 0x4000 /* invalid PSL flag */ | |
| #define CON_MAPON 0x8000 /* mapping on flag */ | |
| #define MCHK_TBM_P0 0x05 /* PPTE in P0 */ | |
| #define MCHK_TBM_P1 0x06 /* PPTE in P1 */ | |
| #define MCHK_M0_P0 0x07 /* PPTE in P0 */ | |
| #define MCHK_M0_P1 0x08 /* PPTE in P1 */ | |
| #define MCHK_INTIPL 0x09 /* invalid ireq */ | |
| #define MCHK_READ 0x80 /* read check */ | |
| #define MCHK_WRITE 0x82 /* write check */ | |
| /* Machine specific IPRs */ | |
| #define MT_TBDR 36 /* Translation Buffer Disable */ | |
| #define MT_CADR 37 /* Cache Disable Register */ | |
| #define MT_MCESR 38 /* Machine Check Error Summary */ | |
| #define MT_CAER 39 /* Cache Error Register */ | |
| #define MT_CONISP 41 /* Console Saved ISP */ | |
| #define MT_CONPC 42 /* Console Saved PC */ | |
| #define MT_CONPSL 43 /* Console Saved PSL */ | |
| #define MT_SBIFS 48 /* SBI fault status */ | |
| #define MT_SBIS 49 /* SBI silo */ | |
| #define MT_SBISC 50 /* SBI silo comparator */ | |
| #define MT_SBIMT 51 /* SBI maint */ | |
| #define MT_SBIER 52 /* SBI error */ | |
| #define MT_SBITA 53 /* SBI timeout addr */ | |
| #define MT_SBIQC 54 /* SBI timeout clear */ | |
| #define MT_IORESET 55 /* I/O Bus Reset */ | |
| #define MT_TBDATA 59 /* Translation Buffer Data */ | |
| #define MT_MBRK 60 /* microbreak */ | |
| #define MT_MAX 63 /* last valid IPR */ | |
| /* CPU */ | |
| #define CPU_MODEL_MODIFIERS \ | |
| { MTAB_XTD|MTAB_VDV, 0, "MODEL", NULL, \ | |
| NULL, &cpu_show_model }, | |
| /* Memory */ | |
| #define MAXMEMWIDTH 24 /* max mem, std KA655 */ | |
| #define MAXMEMSIZE (1 << MAXMEMWIDTH) /* max mem size */ | |
| #define MAXMEMWIDTH_X 24 /* max mem, KA655X */ | |
| #define MAXMEMSIZE_X (1 << MAXMEMWIDTH_X) | |
| #define INITMEMSIZE (1 << 24) /* initial memory size */ | |
| #define MEMSIZE (cpu_unit.capac) | |
| #define ADDR_IS_MEM(x) (((uint32) (x)) < MEMSIZE) | |
| #define MEM_MODIFIERS { UNIT_MSIZE, (1u << 20), NULL, "1M", &cpu_set_size }, \ | |
| { UNIT_MSIZE, (1u << 21), NULL, "2M", &cpu_set_size }, \ | |
| { UNIT_MSIZE, (1u << 22), NULL, "4M", &cpu_set_size }, \ | |
| { UNIT_MSIZE, (1u << 23), NULL, "8M", &cpu_set_size }, \ | |
| { UNIT_MSIZE, (1u << 23) + (1u << 22), NULL, "12M", &cpu_set_size }, \ | |
| { UNIT_MSIZE, (1u << 24), NULL, "16M", &cpu_set_size } | |
| /* Qbus I/O page */ | |
| #define IOPAGEAWIDTH 13 /* IO addr width */ | |
| #define IOPAGESIZE (1u << IOPAGEAWIDTH) /* IO page length */ | |
| #define IOPAGEMASK (IOPAGESIZE - 1) /* IO addr mask */ | |
| #define IOPAGEBASE 0x20000000 /* IO page base */ | |
| #define ADDR_IS_IO(x) ((((uint32) (x)) >= IOPAGEBASE) && \ | |
| (((uint32) (x)) < (IOPAGEBASE + IOPAGESIZE))) | |
| /* Read only memory - appears twice */ | |
| #define ROMAWIDTH 16 /* ROM addr width */ | |
| #define ROMSIZE (1u << ROMAWIDTH) /* ROM length */ | |
| #define ROMAMASK (ROMSIZE - 1) /* ROM addr mask */ | |
| #define ROMBASE 0x20040000 /* ROM base */ | |
| #define ADDR_IS_ROM(x) ((((uint32) (x)) >= ROMBASE) && \ | |
| (((uint32) (x)) < (ROMBASE + ROMSIZE + ROMSIZE))) | |
| /* KA630 board registers */ | |
| #define KAAWIDTH 4 /* REG addr width */ | |
| #define KASIZE (1u << KAAWIDTH) /* REG length */ | |
| #define KABASE 0x20080000 /* REG addr base */ | |
| /* Qbus map registers */ | |
| #define QBMAPAWIDTH 15 /* map addr width */ | |
| #define QBMAPSIZE (1u << QBMAPAWIDTH) /* map length */ | |
| #define QBMAPAMASK (QBMAPSIZE - 1) /* map addr mask */ | |
| #define QBMAPBASE 0x20088000 /* map addr base */ | |
| /* Non-volatile RAM - 128 Bytes long */ | |
| #define NVRAWIDTH 7 /* NVR addr width */ | |
| #define NVRSIZE (1u << NVRAWIDTH) /* NVR length */ | |
| #define NVRAMASK (NVRSIZE - 1) /* NVR addr mask */ | |
| #define NVRBASE 0x200B8000 /* NVR base */ | |
| #define ADDR_IS_NVR(x) ((((uint32) (x)) >= NVRBASE) && \ | |
| (((uint32) (x)) < (NVRBASE + NVRSIZE))) | |
| /* Qbus memory space */ | |
| #define QBMAWIDTH 22 /* Qmem addr width */ | |
| #define QBMSIZE (1u << QBMAWIDTH) /* Qmem length */ | |
| #define QBMAMASK (QBMSIZE - 1) /* Qmem addr mask */ | |
| #define QBMBASE 0x30000000 /* Qmem base */ | |
| #define ADDR_IS_QBM(x) ((((uint32) (x)) >= QBMBASE) && \ | |
| (((uint32) (x)) < (QBMBASE + QBMSIZE))) | |
| /* Other address spaces */ | |
| #define ADDR_IS_CDG(x) (0) | |
| /* Machine specific reserved operand tests (all NOPs) */ | |
| #define ML_PA_TEST(r) | |
| #define ML_LR_TEST(r) | |
| #define ML_SBR_TEST(r) | |
| #define ML_PXBR_TEST(r) | |
| #define LP_AST_TEST(r) | |
| #define LP_MBZ84_TEST(r) | |
| #define LP_MBZ92_TEST(r) | |
| /* Qbus I/O modes */ | |
| #define READ 0 /* PDP-11 compatibility */ | |
| #define WRITE (L_WORD) | |
| #define WRITEB (L_BYTE) | |
| /* Common CSI flags */ | |
| #define CSR_V_GO 0 /* go */ | |
| #define CSR_V_IE 6 /* interrupt enable */ | |
| #define CSR_V_DONE 7 /* done */ | |
| #define CSR_V_BUSY 11 /* busy */ | |
| #define CSR_V_ERR 15 /* error */ | |
| #define CSR_GO (1u << CSR_V_GO) | |
| #define CSR_IE (1u << CSR_V_IE) | |
| #define CSR_DONE (1u << CSR_V_DONE) | |
| #define CSR_BUSY (1u << CSR_V_BUSY) | |
| #define CSR_ERR (1u << CSR_V_ERR) | |
| /* Timers */ | |
| #define TMR_CLK 0 /* 100Hz clock */ | |
| /* I/O system definitions */ | |
| #define DZ_MUXES 4 /* max # of DZV muxes */ | |
| #define DZ_LINES 4 /* lines per DZV mux */ | |
| #define VH_MUXES 4 /* max # of DHQ muxes */ | |
| #define DLX_LINES 16 /* max # of KL11/DL11's */ | |
| #define DCX_LINES 16 /* max # of DC11's */ | |
| #define MT_MAXFR (1 << 16) /* magtape max rec */ | |
| #define AUTO_LNT 34 /* autoconfig ranks */ | |
| #define DEV_V_UBUS (DEV_V_UF + 0) /* Unibus */ | |
| #define DEV_V_QBUS (DEV_V_UF + 1) /* Qbus */ | |
| #define DEV_V_Q18 (DEV_V_UF + 2) /* Qbus, mem <= 256KB */ | |
| #define DEV_UBUS (1u << DEV_V_UBUS) | |
| #define DEV_QBUS (1u << DEV_V_QBUS) | |
| #define DEV_Q18 (1u << DEV_V_Q18) | |
| #define UNIBUS FALSE /* 22b only */ | |
| #define DEV_RDX 16 /* default device radix */ | |
| /* Device information block */ | |
| #define VEC_DEVMAX 4 /* max device vec */ | |
| typedef struct { | |
| uint32 ba; /* base addr */ | |
| uint32 lnt; /* length */ | |
| t_stat (*rd)(int32 *dat, int32 ad, int32 md); | |
| t_stat (*wr)(int32 dat, int32 ad, int32 md); | |
| int32 vnum; /* vectors: number */ | |
| int32 vloc; /* locator */ | |
| int32 vec; /* value */ | |
| int32 (*ack[VEC_DEVMAX])(void); /* ack routine */ | |
| } DIB; | |
| /* Qbus I/O page layout - see pdp11_ui_lib.c for address layout details */ | |
| #define IOBA_AUTO (0) /* Assigned by Auto Configure */ | |
| /* The KA620/KA630 maintains 4 separate hardware IPL levels, IPL 17 to IPL 14; | |
| however, DEC Qbus controllers all interrupt on IPL 14 | |
| Within each IPL, priority is right to left | |
| */ | |
| /* IPL 17 */ | |
| /* IPL 16 */ | |
| #define INT_V_CLK 0 /* clock */ | |
| /* IPL 15 */ | |
| /* IPL 14 - devices through RY are IPL 15 on Unibus systems */ | |
| #define INT_V_RQ 0 /* RQDX3 */ | |
| #define INT_V_RL 1 /* RLV12/RL02 */ | |
| #define INT_V_DZRX 2 /* DZ11 */ | |
| #define INT_V_DZTX 3 | |
| #define INT_V_TS 4 /* TS11/TSV05 */ | |
| #define INT_V_TQ 5 /* TMSCP */ | |
| #define INT_V_XQ 6 /* DEQNA/DELQA */ | |
| #define INT_V_RY 7 /* RXV21 */ | |
| #define INT_V_TTI 8 /* console */ | |
| #define INT_V_TTO 9 | |
| #define INT_V_PTR 10 /* PC11 */ | |
| #define INT_V_PTP 11 | |
| #define INT_V_LPT 12 /* LP11 */ | |
| #define INT_V_CSI 13 /* SSC cons UART */ | |
| #define INT_V_CSO 14 | |
| #define INT_V_TMR0 15 /* SSC timers */ | |
| #define INT_V_TMR1 16 | |
| #define INT_V_VHRX 17 /* DHQ11 */ | |
| #define INT_V_VHTX 18 | |
| #define INT_V_QDSS 19 /* QDSS */ | |
| #define INT_V_CR 20 | |
| #define INT_V_QVSS 21 /* QVSS */ | |
| #define INT_V_DMCRX 22 | |
| #define INT_V_DMCTX 23 | |
| #define INT_CLK (1u << INT_V_CLK) | |
| #define INT_RQ (1u << INT_V_RQ) | |
| #define INT_RL (1u << INT_V_RL) | |
| #define INT_DZRX (1u << INT_V_DZRX) | |
| #define INT_DZTX (1u << INT_V_DZTX) | |
| #define INT_TS (1u << INT_V_TS) | |
| #define INT_TQ (1u << INT_V_TQ) | |
| #define INT_XQ (1u << INT_V_XQ) | |
| #define INT_RY (1u << INT_V_RY) | |
| #define INT_TTI (1u << INT_V_TTI) | |
| #define INT_TTO (1u << INT_V_TTO) | |
| #define INT_PTR (1u << INT_V_PTR) | |
| #define INT_PTP (1u << INT_V_PTP) | |
| #define INT_LPT (1u << INT_V_LPT) | |
| #define INT_CSI (1u << INT_V_CSI) | |
| #define INT_CSO (1u << INT_V_CSO) | |
| #define INT_TMR0 (1u << INT_V_TMR0) | |
| #define INT_TMR1 (1u << INT_V_TMR1) | |
| #define INT_VHRX (1u << INT_V_VHRX) | |
| #define INT_VHTX (1u << INT_V_VHTX) | |
| #define INT_QDSS (1u << INT_V_QDSS) | |
| #define INT_CR (1u << INT_V_CR) | |
| #define INT_QVSS (1u << INT_V_QVSS) | |
| #define INT_DMCRX (1u << INT_V_DMCRX) | |
| #define INT_DMCTX (1u << INT_V_DMCTX) | |
| #define IPL_CLK (0x16 - IPL_HMIN) /* relative IPL */ | |
| #define IPL_RQ (0x14 - IPL_HMIN) | |
| #define IPL_RL (0x14 - IPL_HMIN) | |
| #define IPL_DZRX (0x14 - IPL_HMIN) | |
| #define IPL_DZTX (0x14 - IPL_HMIN) | |
| #define IPL_TS (0x14 - IPL_HMIN) | |
| #define IPL_TQ (0x14 - IPL_HMIN) | |
| #define IPL_XQ (0x14 - IPL_HMIN) | |
| #define IPL_RY (0x14 - IPL_HMIN) | |
| #define IPL_TTI (0x14 - IPL_HMIN) | |
| #define IPL_TTO (0x14 - IPL_HMIN) | |
| #define IPL_PTR (0x14 - IPL_HMIN) | |
| #define IPL_PTP (0x14 - IPL_HMIN) | |
| #define IPL_LPT (0x14 - IPL_HMIN) | |
| #define IPL_CSI (0x14 - IPL_HMIN) | |
| #define IPL_CSO (0x14 - IPL_HMIN) | |
| #define IPL_TMR0 (0x14 - IPL_HMIN) | |
| #define IPL_TMR1 (0x14 - IPL_HMIN) | |
| #define IPL_VHRX (0x14 - IPL_HMIN) | |
| #define IPL_VHTX (0x14 - IPL_HMIN) | |
| #define IPL_QDSS (0x14 - IPL_HMIN) | |
| #define IPL_CR (0x14 - IPL_HMIN) | |
| #define IPL_QVSS (0x14 - IPL_HMIN) | |
| #define IPL_DMCRX (0x15 - IPL_HMIN) | |
| #define IPL_DMCTX (0x15 - IPL_HMIN) | |
| #define IPL_HMAX 0x17 /* highest hwre level */ | |
| #define IPL_HMIN 0x14 /* lowest hwre level */ | |
| #define IPL_HLVL (IPL_HMAX - IPL_HMIN + 1) /* # hardware levels */ | |
| #define IPL_SMAX 0xF /* highest swre level */ | |
| /* Device vectors */ | |
| #define VEC_AUTO (0) /* Assigned by Auto Configure */ | |
| #define VEC_FLOAT (0) /* Assigned by Auto Configure */ | |
| #define VEC_QBUS 1 /* Qbus system */ | |
| #define VEC_Q 0x200 /* Qbus vector offset */ | |
| /* Interrupt macros */ | |
| #define IVCL(dv) ((IPL_##dv * 32) + INT_V_##dv) | |
| #define IREQ(dv) int_req[IPL_##dv] | |
| #define SET_INT(dv) int_req[IPL_##dv] = int_req[IPL_##dv] | (INT_##dv) | |
| #define CLR_INT(dv) int_req[IPL_##dv] = int_req[IPL_##dv] & ~(INT_##dv) | |
| #define IORETURN(f,v) ((f)? (v): SCPE_OK) /* cond error return */ | |
| /* Logging */ | |
| #define LOG_CPU_I 0x1 /* intexc */ | |
| #define LOG_CPU_R 0x2 /* REI */ | |
| #define LOG_CPU_P 0x4 /* context */ | |
| /* Function prototypes for virtual memory interface */ | |
| int32 Read (uint32 va, int32 lnt, int32 acc); | |
| void Write (uint32 va, int32 val, int32 lnt, int32 acc); | |
| /* Function prototypes for physical memory interface (inlined) */ | |
| SIM_INLINE int32 ReadB (uint32 pa); | |
| SIM_INLINE int32 ReadW (uint32 pa); | |
| SIM_INLINE int32 ReadL (uint32 pa); | |
| SIM_INLINE int32 ReadLP (uint32 pa); | |
| SIM_INLINE void WriteB (uint32 pa, int32 val); | |
| SIM_INLINE void WriteW (uint32 pa, int32 val); | |
| SIM_INLINE void WriteL (uint32 pa, int32 val); | |
| void WriteLP (uint32 pa, int32 val); | |
| /* Function prototypes for I/O */ | |
| int32 Map_ReadB (uint32 ba, int32 bc, uint8 *buf); | |
| int32 Map_ReadW (uint32 ba, int32 bc, uint16 *buf); | |
| int32 Map_WriteB (uint32 ba, int32 bc, uint8 *buf); | |
| int32 Map_WriteW (uint32 ba, int32 bc, uint16 *buf); | |
| int32 clk_cosched (int32 wait); | |
| t_stat cpu_show_model (FILE *st, UNIT *uptr, int32 val, void *desc); | |
| #include "pdp11_io_lib.h" | |
| #endif |