| /* hp2100_defs.h: HP 2100 simulator definitions | |
| Copyright (c) 1993-2012, Robert M. Supnik | |
| Permission is hereby granted, free of charge, to any person obtaining a | |
| copy of this software and associated documentation files (the "Software"), | |
| to deal in the Software without restriction, including without limitation | |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| and/or sell copies of the Software, and to permit persons to whom the | |
| Software is furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be included in | |
| all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| Except as contained in this notice, the name of Robert M Supnik shall not | |
| be used in advertising or otherwise to promote the sale, use or other dealings | |
| in this Software without prior written authorization from Robert M Supnik. | |
| 14-Dec-12 JDB Added "-Wbitwise-op-parentheses" to the suppression pragmas | |
| 12-May-12 JDB Added pragmas to suppress logical operator precedence warnings | |
| 10-Feb-12 JDB Added hp_setsc, hp_showsc functions to support SC modifier | |
| 28-Mar-11 JDB Tidied up signal handling | |
| 29-Oct-10 JDB DMA channels renamed from 0,1 to 1,2 to match documentation | |
| 27-Oct-10 JDB Revised I/O signal enum values for concurrent signals | |
| Revised I/O macros for new signal handling | |
| 09-Oct-10 JDB Added DA and DC device select code assignments | |
| 07-Sep-08 JDB Added POLL_FIRST to indicate immediate connection attempt | |
| 15-Jul-08 JDB Rearranged declarations with hp2100_cpu.h | |
| 26-Jun-08 JDB Rewrote device I/O to model backplane signals | |
| 25-Jun-08 JDB Added PIF device | |
| 17-Jun-08 JDB Declared fmt_char() function | |
| 26-May-08 JDB Added MPX device | |
| 24-Apr-08 JDB Added I_MRG_I, I_JSB, I_JSB_I, and I_JMP instruction masks | |
| 14-Apr-08 JDB Changed TMR_MUX to TMR_POLL for idle support | |
| Added POLLMODE, sync_poll() declaration | |
| Added I_MRG, I_ISZ, I_IOG, I_STF, and I_SFS instruction masks | |
| 07-Dec-07 JDB Added BACI device | |
| 10-Nov-07 JDB Added 16/32-bit unsigned-to-signed conversions | |
| 11-Jan-07 JDB Added 12578A DMA byte packing to DMA structure | |
| 28-Dec-06 JDB Added CRS backplane signal as I/O pseudo-opcode | |
| Added DMASK32 32-bit mask value | |
| 21-Dec-06 JDB Changed MEM_ADDR_OK for 21xx loader support | |
| 12-Sep-06 JDB Define NOTE_IOG to recalc interrupts after instr exec | |
| Rename STOP_INDINT to NOTE_INDINT (not a stop condition) | |
| 30-Dec-04 JDB Added IBL_DS_HEAD head number mask | |
| 19-Nov-04 JDB Added STOP_OFFLINE, STOP_PWROFF stop codes | |
| 25-Apr-04 RMS Added additional IBL definitions | |
| Added DMA EDT I/O pseudo-opcode | |
| 25-Apr-03 RMS Revised for extended file support | |
| 24-Oct-02 RMS Added indirect address interrupt | |
| 08-Feb-02 RMS Added DMS definitions | |
| 01-Feb-02 RMS Added terminal multiplexor support | |
| 16-Jan-02 RMS Added additional device support | |
| 30-Nov-01 RMS Added extended SET/SHOW support | |
| 15-Oct-00 RMS Added dynamic device numbers | |
| 14-Apr-99 RMS Changed t_addr to unsigned | |
| The author gratefully acknowledges the help of Jeff Moffat in answering | |
| questions about the HP2100; and of Dave Bryan in adding features and | |
| correcting errors throughout the simulator. | |
| */ | |
| #ifndef _HP2100_DEFS_H_ | |
| #define _HP2100_DEFS_H_ 0 | |
| #include "sim_defs.h" /* simulator defns */ | |
| /* Required to quell clang precedence warnings */ | |
| #if defined (__GNUC__) | |
| #pragma GCC diagnostic ignored "-Wunknown-pragmas" | |
| #pragma GCC diagnostic ignored "-Wpragmas" | |
| #pragma GCC diagnostic ignored "-Wlogical-op-parentheses" | |
| #pragma GCC diagnostic ignored "-Wbitwise-op-parentheses" | |
| #endif | |
| /* Simulator stop and notification codes */ | |
| #define STOP_RSRV 1 /* must be 1 */ | |
| #define STOP_IODV 2 /* must be 2 */ | |
| #define STOP_HALT 3 /* HALT */ | |
| #define STOP_IBKPT 4 /* breakpoint */ | |
| #define STOP_IND 5 /* indirect loop */ | |
| #define NOTE_INDINT 6 /* indirect intr */ | |
| #define STOP_NOCONN 7 /* no connection */ | |
| #define STOP_OFFLINE 8 /* device offline */ | |
| #define STOP_PWROFF 9 /* device powered off */ | |
| #define NOTE_IOG 10 /* I/O instr executed */ | |
| /* Memory */ | |
| #define MEMSIZE (cpu_unit.capac) /* actual memory size */ | |
| #define VA_N_SIZE 15 /* virtual addr size */ | |
| #define VASIZE (1 << VA_N_SIZE) | |
| #define VAMASK 077777 /* virt addr mask */ | |
| #define PA_N_SIZE 20 /* phys addr size */ | |
| #define PASIZE (1 << PA_N_SIZE) | |
| #define PAMASK (PASIZE - 1) /* phys addr mask */ | |
| /* Architectural constants */ | |
| #define SIGN32 020000000000 /* 32b sign */ | |
| #define DMASK32 037777777777 /* 32b data mask/maximum value */ | |
| #define DMAX32 017777777777 /* 32b maximum signed value */ | |
| #define SIGN 0100000 /* 16b sign */ | |
| #define DMASK 0177777 /* 16b data mask/maximum value */ | |
| #define DMAX 0077777 /* 16b maximum signed value */ | |
| #define DMASK8 0377 /* 8b data mask/maximum value */ | |
| /* Portable conversions (sign-extension, unsigned-to-signed) */ | |
| #define SEXT(x) ((int32) (((x) & SIGN)? ((x) | ~DMASK): ((x) & DMASK))) | |
| #define INT16(u) ((u) > DMAX ? (-(int16) (DMASK - (u)) - 1) : (int16) (u)) | |
| #define INT32(u) ((u) > DMAX32 ? (-(int32) (DMASK32 - (u)) - 1) : (int32) (u)) | |
| /* Timers */ | |
| #define TMR_CLK 0 /* clock */ | |
| #define TMR_POLL 1 /* input polling */ | |
| #define POLL_RATE 100 /* poll 100 times per second */ | |
| #define POLL_FIRST 1 /* first poll is "immediate" */ | |
| #define POLL_WAIT 15800 /* initial poll ~ 10 msec. */ | |
| typedef enum { INITIAL, SERVICE } POLLMODE; /* poll synchronization modes */ | |
| /* I/O instruction sub-opcodes */ | |
| #define soHLT 0 /* halt */ | |
| #define soFLG 1 /* set/clear flag */ | |
| #define soSFC 2 /* skip on flag clear */ | |
| #define soSFS 3 /* skip on flag set */ | |
| #define soMIX 4 /* merge into A/B */ | |
| #define soLIX 5 /* load into A/B */ | |
| #define soOTX 6 /* output from A/B */ | |
| #define soCTL 7 /* set/clear control */ | |
| /* I/O devices - fixed select code assignments */ | |
| #define CPU 000 /* interrupt control */ | |
| #define OVF 001 /* overflow */ | |
| #define DMALT1 002 /* DMA 1 alternate */ | |
| #define DMALT2 003 /* DMA 2 alternate */ | |
| #define PWR 004 /* power fail */ | |
| #define PRO 005 /* parity/mem protect */ | |
| #define DMA1 006 /* DMA channel 1 */ | |
| #define DMA2 007 /* DMA channel 2 */ | |
| /* I/O devices - variable select code assignment defaults */ | |
| #define PTR 010 /* 12597A-002 paper tape reader */ | |
| #define TTY 011 /* 12531C teleprinter */ | |
| #define PTP 012 /* 12597A-005 paper tape punch */ | |
| #define CLK 013 /* 12539C time-base generator */ | |
| #define LPS 014 /* 12653A line printer */ | |
| #define LPT 015 /* 12845A line printer */ | |
| #define MTD 020 /* 12559A data */ | |
| #define MTC 021 /* 12559A control */ | |
| #define DPD 022 /* 12557A data */ | |
| #define DPC 023 /* 12557A control */ | |
| #define DQD 024 /* 12565A data */ | |
| #define DQC 025 /* 12565A control */ | |
| #define DRD 026 /* 12610A data */ | |
| #define DRC 027 /* 12610A control */ | |
| #define MSD 030 /* 13181A data */ | |
| #define MSC 031 /* 13181A control */ | |
| #define IPLI 032 /* 12566B link in */ | |
| #define IPLO 033 /* 12566B link out */ | |
| #define DS 034 /* 13037A control */ | |
| #define BACI 035 /* 12966A Buffered Async Comm Interface */ | |
| #define MPX 036 /* 12792A/B/C 8-channel multiplexer */ | |
| #define PIF 037 /* 12620A/12936A Privileged Interrupt Fence */ | |
| #define MUXL 040 /* 12920A lower data */ | |
| #define MUXU 041 /* 12920A upper data */ | |
| #define MUXC 042 /* 12920A control */ | |
| #define DI_DA 043 /* 12821A Disc Interface with Amigo disc devices */ | |
| #define DI_DC 044 /* 12821A Disc Interface with CS/80 disc and tape devices */ | |
| #define OPTDEV 002 /* start of optional devices */ | |
| #define CRSDEV 006 /* start of devices that receive CRS */ | |
| #define VARDEV 010 /* start of variable assignments */ | |
| #define MAXDEV 077 /* end of select code range */ | |
| /* IBL assignments */ | |
| #define IBL_V_SEL 14 /* ROM select <15:14> */ | |
| #define IBL_M_SEL 03 | |
| #define IBL_PTR 0000000 /* ROM 0: 12992K paper tape reader (PTR) */ | |
| #define IBL_DP 0040000 /* ROM 1: 12992A 7900 disc (DP) */ | |
| #define IBL_DQ 0060000 /* ROM 1: 12992A 2883 disc (DQ) */ | |
| #define IBL_MS 0100000 /* ROM 2: 12992D 7970 tape (MS) */ | |
| #define IBL_DS 0140000 /* ROM 3: 12992B 7905/06/20/25 disc (DS) */ | |
| #define IBL_MAN 0010000 /* RPL/manual boot <13:12> */ | |
| #define IBL_V_DEV 6 /* select code <11:6> */ | |
| #define IBL_OPT 0000070 /* options in <5:3> */ | |
| #define IBL_DP_REM 0000001 /* DP removable <0:0> */ | |
| #define IBL_DS_HEAD 0000003 /* DS head number <1:0> */ | |
| #define IBL_LNT 64 /* boot ROM length in words */ | |
| #define IBL_MASK (IBL_LNT - 1) /* boot length mask */ | |
| #define IBL_DPC (IBL_LNT - 2) /* DMA ctrl word */ | |
| #define IBL_END (IBL_LNT - 1) /* last location */ | |
| typedef uint16 BOOT_ROM [IBL_LNT]; /* boot ROM data */ | |
| /* I/O backplane signals. | |
| The IOSIGNAL declarations mirror the hardware I/O backplane signals. A set | |
| of one or more signals forms an IOCYCLE that is sent to a device IOHANDLER | |
| for action. The CPU and DMA dispatch one signal set to the target device | |
| handler per I/O cycle. A CPU cycle consists of either one or two signals; if | |
| present, the second signal will be CLF. A DMA cycle consists of from two to | |
| five signals. In addition, a front-panel PRESET or power-on reset dispatches | |
| two or three signals, respectively. | |
| In hardware, signals are assigned to one or more specific I/O T-periods, and | |
| some signals are asserted concurrently. For example, a programmed STC sc,C | |
| instruction asserts the STC and CLF signals together in period T4. Under | |
| simulation, signals are ORed to form an I/O cycle; in this example, the | |
| signal handler would receive an IOCYCLE value of "ioSTC | ioCLF". | |
| Hardware allows parallel action for concurrent signals. Under simulation, a | |
| "concurrent" set of signals is processed sequentially by the signal handler | |
| in order of ascending numerical value. Although assigned T-periods differ | |
| between programmed I/O and DMA I/O cycles, a single processing order is used. | |
| The order of execution generally follows the order of T-period assertion, | |
| except that ioSIR is processed after all other signals that may affect the | |
| interrupt request chain. | |
| Implementation notes: | |
| 1. The ioCLF signal must be processed after ioSFS/ioSFC to ensure that a | |
| true skip test generates ioSKF before the flag is cleared, and after | |
| ioIOI/ioIOO/ioSTC/ioCLC to meet the requirement that executing an | |
| instruction having the H/C bit set is equivalent to executing the same | |
| instruction with the H/C bit clear and then a CLF instruction. | |
| 2. The ioSKF signal is never sent to an I/O handler. Rather, it is returned | |
| from the handler if the SFC or SFS condition is true. If the condition | |
| is false, ioNONE is returned instead. As these two values are returned | |
| in the 16-bit data portion of the returned value, their assigned values | |
| must be <= 100000 octal. | |
| 3. An I/O handler will receive ioCRS as a result of a CLC 0 instruction, | |
| ioPOPIO and ioCRS as a result of a RESET command, and ioPON, ioPOPIO, and | |
| ioCRS as a result of a RESET -P command. | |
| 4. An I/O handler will receive ioNONE when a HLT instruction is executed | |
| that has the H/C bit clear (i.e., no CLF generated). | |
| 5. In hardware, the SIR signal is generated unconditionally every T5 period | |
| to time the setting of the IRQ flip-flop. Under simulation, ioSIR | |
| indicates that the I/O handler must set the PRL, IRQ, and SRQ signals as | |
| required by the interface logic. ioSIR must be included in the I/O cycle | |
| if any of the flip-flops affecting these signals are changed and the | |
| interface supports interrupts or DMA transfers. | |
| 6. In hardware, the ENF signal is unconditionally generated every T2 period | |
| to time the setting of the flag flip-flop and to reset the IRQ flip-flop. | |
| If the flag buffer flip-flip is set, then flag will be set by ENF. If | |
| the flag buffer is clear, ENF will not affect flag. Under simulation, | |
| ioENF is sent to set the flag buffer and flag flip-flops. For those | |
| interfaces where this action is identical to that provided by STF, the | |
| ioENF handler may simply fall into the ioSTF handler. | |
| 7. In hardware, the PON signal is asserted continuously while the CPU is | |
| operating. Under simulation, ioPON is asserted only at simulator | |
| initialization or when processing a RESET -P command. | |
| */ | |
| typedef enum { ioNONE = 0000000, /* -- -- -- -- -- no signal asserted */ | |
| ioPON = 0000001, /* T2 T3 T4 T5 T6 power on normal */ | |
| ioENF = 0000002, /* T2 -- -- -- -- enable flag */ | |
| ioIOI = 0000004, /* -- -- T4 T5 -- I/O data input (CPU) | |
| T2 T3 -- -- -- I/O data input (DMA) */ | |
| ioIOO = 0000010, /* -- T3 T4 -- -- I/O data output */ | |
| ioSKF = 0000020, /* -- T3 T4 T5 -- skip on flag */ | |
| ioSFS = 0000040, /* -- T3 T4 T5 -- skip if flag is set */ | |
| ioSFC = 0000100, /* -- T3 T4 T5 -- skip if flag is clear */ | |
| ioSTC = 0000200, /* -- -- T4 -- -- set control flip-flop (CPU) | |
| -- T3 -- -- -- set control flip-flop (DMA) */ | |
| ioCLC = 0000400, /* -- -- T4 -- -- clear control flip-flop (CPU) | |
| -- T3 T4 -- -- clear control flip-flop (DMA) */ | |
| ioSTF = 0001000, /* -- T3 -- -- -- set flag flip-flop */ | |
| ioCLF = 0002000, /* -- -- T4 -- -- clear flag flip-flop (CPU) | |
| -- T3 -- -- -- clear flag flip-flop (DMA) */ | |
| ioEDT = 0004000, /* -- -- T4 -- -- end data transfer */ | |
| ioCRS = 0010000, /* -- -- -- T5 -- control reset */ | |
| ioPOPIO = 0020000, /* -- -- -- T5 -- power-on preset to I/O */ | |
| ioIAK = 0040000, /* -- -- -- -- T6 interrupt acknowledge */ | |
| ioSIR = 0100000 } IOSIGNAL; /* -- -- -- T5 -- set interrupt request */ | |
| typedef uint32 IOCYCLE; /* a set of signals forming one I/O cycle */ | |
| #define IOIRQSET (ioSTC | ioCLC | ioENF | \ | |
| ioSTF | ioCLF | ioIAK | \ | |
| ioCRS | ioPOPIO | ioPON) /* signals that may affect interrupt state */ | |
| /* I/O structures */ | |
| typedef enum { CLEAR, SET } FLIP_FLOP; /* flip-flop type and values */ | |
| typedef struct dib DIB; /* incomplete definition */ | |
| typedef uint32 IOHANDLER (DIB *dibptr, /* I/O signal handler prototype */ | |
| IOCYCLE signal_set, | |
| uint32 stat_data); | |
| struct dib { /* Device information block */ | |
| IOHANDLER *io_handler; /* pointer to device's I/O signal handler */ | |
| uint32 select_code; /* device's select code */ | |
| uint32 card_index; /* device's card index for state variables */ | |
| }; | |
| /* I/O signal and status macros. | |
| The following macros are useful in I/O signal handlers and unit service | |
| routines. The parameter definition symbols employed are: | |
| I = an IOCYCLE value | |
| E = a t_stat error status value | |
| D = a uint16 data value | |
| C = a uint32 combined status and data value | |
| P = a pointer to a DIB structure | |
| B = a Boolean test value | |
| Implementation notes: | |
| 1. The IONEXT macro isolates the next signal in sequence to process from the | |
| I/O cycle I. | |
| 2. The IOADDSIR macro adds an ioSIR signal to the I/O cycle I if it | |
| contains signals that might change the interrupt state. | |
| 3. The IORETURN macro forms the combined status and data value to be | |
| returned by a handler from the t_stat error code E and the 16-bit data | |
| value D. | |
| 4. The IOSTATUS macro isolates the t_stat error code from a combined status | |
| and data value value C. | |
| 5. The IODATA macro isolates the 16-bit data value from a combined status | |
| and data value value C. | |
| 6. The IOPOWERON macro calls signal handler P->H with DIB pointer P to | |
| process a power-on reset action. | |
| 7. The IOPRESET macro calls signal handler P->H with DIB pointer P to | |
| process a front-panel PRESET action. | |
| 8. The IOERROR macro returns t_stat error code E from a unit service routine | |
| if the Boolean test B is true. | |
| */ | |
| #define IONEXT(I) (IOSIGNAL) ((I) & (IOCYCLE) (- (int32) (I))) /* extract next I/O signal to handle */ | |
| #define IOADDSIR(I) ((I) & IOIRQSET ? (I) | ioSIR : (I)) /* add SIR if IRQ state might change */ | |
| #define IORETURN(E,D) ((uint32) ((E) << 16 | (D) & DMASK)) /* form I/O handler return value */ | |
| #define IOSTATUS(C) ((t_stat) ((C) >> 16) & DMASK) /* extract I/O status from combined value */ | |
| #define IODATA(C) ((uint16) ((C) & DMASK)) /* extract data from combined value */ | |
| #define IOPOWERON(P) (P)->io_handler ((P), ioPON | ioPOPIO | ioCRS, 0) /* send power-on signals to handler */ | |
| #define IOPRESET(P) (P)->io_handler ((P), ioPOPIO | ioCRS, 0) /* send PRESET signals to handler */ | |
| #define IOERROR(B,E) ((B) ? (E) : SCPE_OK) /* stop on I/O error if enabled */ | |
| /* I/O signal logic macros. | |
| The following macros implement the logic for the SKF, PRL, IRQ, and SRQ | |
| signals. Both standard and general logic macros are provided. The parameter | |
| definition symbols employed are: | |
| S = a uint32 select code value | |
| B = a Boolean test value | |
| N = a name of a structure containing the standard flip-flops | |
| Implementation notes: | |
| 1. The setSKF macro sets the Skip on Flag signal in the return data value if | |
| the Boolean value B is true. | |
| 2. The setPRL macro sets the Priority Low signal for select code S to the | |
| Boolean value B. | |
| 3. The setIRQ macro sets the Interrupt Request signal for select code S to | |
| the Boolean value B. | |
| 4. The setSRQ macro sets the Service Request signal for select code S to the | |
| Boolean value B. | |
| 5. The PRL macro returns the Priority Low signal for select code S as a | |
| Boolean value. | |
| 6. The IRQ macro returns the Interrupt Request signal for select code S as a | |
| Boolean value. | |
| 7. The SRQ macro returns the Service Request signal for select code S as a | |
| Boolean value. | |
| 8. The setstdSKF macro sets Skip on Flag signal in the return data value if | |
| the flag state in structure N matches the current skip test condition. | |
| 9. The setstdPRL macro sets the Priority Low signal for the select code | |
| referenced by "dibptr" using the standard logic and the control and flag | |
| states in structure N. | |
| 10. The setstdIRQ macro sets the Interrupt Request signal for the select code | |
| referenced by "dibptr" using the standard logic and the control, flag, | |
| and flag buffer states in structure N. | |
| 11. The setstdSRQ macro sets the Service Request signal for the select code | |
| referenced by "dibptr" using the standard logic and the flag state in | |
| structure N. | |
| */ | |
| #define BIT_V(S) ((S) & 037) /* convert select code to bit position */ | |
| #define BIT_M(S) (1u << BIT_V (S)) /* convert select code to bit mask */ | |
| #define setSKF(B) stat_data = IORETURN (SCPE_OK, (uint16) ((B) ? ioSKF : ioNONE)) | |
| #define setPRL(S,B) dev_prl[(S)/32] = dev_prl[(S)/32] & ~BIT_M (S) | (((B) & 1) << BIT_V (S)) | |
| #define setIRQ(S,B) dev_irq[(S)/32] = dev_irq[(S)/32] & ~BIT_M (S) | (((B) & 1) << BIT_V (S)) | |
| #define setSRQ(S,B) dev_srq[(S)/32] = dev_srq[(S)/32] & ~BIT_M (S) | (((B) & 1) << BIT_V (S)) | |
| #define PRL(S) ((dev_prl[(S)/32] >> BIT_V (S)) & 1) | |
| #define IRQ(S) ((dev_irq[(S)/32] >> BIT_V (S)) & 1) | |
| #define SRQ(S) ((dev_srq[(S)/32] >> BIT_V (S)) & 1) | |
| #define setstdSKF(N) setSKF ((signal == ioSFC) && !N.flag || \ | |
| (signal == ioSFS) && N.flag) | |
| #define setstdPRL(N) setPRL (dibptr->select_code, !(N.control & N.flag)); | |
| #define setstdIRQ(N) setIRQ (dibptr->select_code, N.control & N.flag & N.flagbuf); | |
| #define setstdSRQ(N) setSRQ (dibptr->select_code, N.flag); | |
| /* CPU state */ | |
| extern uint32 SR; /* S register (for IBL) */ | |
| extern uint32 dev_prl [2], dev_irq [2], dev_srq [2]; /* I/O signal vectors */ | |
| /* Simulator state */ | |
| extern FILE *sim_deb; | |
| extern FILE *sim_log; | |
| extern int32 sim_step; | |
| extern int32 sim_switches; | |
| /* CPU functions */ | |
| extern t_stat ibl_copy (const BOOT_ROM rom, int32 dev); | |
| extern void hp_enbdis_pair (DEVICE *ccp, DEVICE *dcp); | |
| /* System functions */ | |
| extern const char *fmt_char (uint8 ch); | |
| extern t_stat hp_setsc (UNIT *uptr, int32 val, char *cptr, void *desc); | |
| extern t_stat hp_showsc (FILE *st, UNIT *uptr, int32 val, void *desc); | |
| extern t_stat hp_setdev (UNIT *uptr, int32 val, char *cptr, void *desc); | |
| extern t_stat hp_showdev (FILE *st, UNIT *uptr, int32 val, void *desc); | |
| /* Device-specific functions */ | |
| extern int32 sync_poll (POLLMODE poll_mode); | |
| #endif |