| /* id_dp.c: Interdata 2.5MB/10MB cartridge disk simulator | |
| Copyright (c) 2001-2008, Robert M. Supnik | |
| Permission is hereby granted, free of charge, to any person obtaining a | |
| copy of this software and associated documentation files (the "Software"), | |
| to deal in the Software without restriction, including without limitation | |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| and/or sell copies of the Software, and to permit persons to whom the | |
| Software is furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be included in | |
| all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| Except as contained in this notice, the name of Robert M Supnik shall not be | |
| used in advertising or otherwise to promote the sale, use or other dealings | |
| in this Software without prior written authorization from Robert M Supnik. | |
| dp M46-421 2.5MB/10MB cartridge disk | |
| 18-Mar-05 RMS Added attached test to detach routine | |
| 25-Jan-04 RMS Revised for device debug support | |
| 25-Apr-03 RMS Revised for extended file support | |
| 16-Feb-03 RMS Fixed read to test transfer ok before selch operation | |
| */ | |
| #include "id_defs.h" | |
| #include <math.h> | |
| #define DP_NUMBY 256 /* bytes/sector */ | |
| #define DP_NUMSC 24 /* sectors/track */ | |
| #define UNIT_V_WLK (UNIT_V_UF + 0) /* write locked */ | |
| #define UNIT_V_DTYPE (UNIT_V_UF + 1) /* disk type */ | |
| #define UNIT_M_DTYPE 0x1 | |
| #define UNIT_V_AUTO (UNIT_V_UF + 2) /* autosize */ | |
| #define UNIT_WLK (1 << UNIT_V_WLK) | |
| #define UNIT_DTYPE (UNIT_M_DTYPE << UNIT_V_DTYPE) | |
| #define UNIT_AUTO (1 << UNIT_V_AUTO) | |
| #define GET_DTYPE(x) (((x) >> UNIT_V_DTYPE) & UNIT_M_DTYPE) | |
| #define CYL u3 /* current cylinder */ | |
| #define STD u4 /* drive status */ | |
| #define UNIT_WPRT (UNIT_WLK | UNIT_RO) /* write protect */ | |
| /* Controller status */ | |
| #define STC_OVR 0x80 /* overrun */ | |
| #define STC_ACF 0x40 /* addr cmp fail */ | |
| #define STC_DEF 0x20 /* def track NI */ | |
| #define STC_CYO 0x10 /* cylinder ovflo */ | |
| #define STC_IDL 0x02 /* ctrl idle */ | |
| #define STC_DTE 0x01 /* xfer error */ | |
| #define SETC_EX (STC_OVR|STC_ACF|STC_DEF|STC_CYO) | |
| #define STC_MASK (STC_OVR|STC_ACF|STC_DEF|STC_CYO|STA_BSY|STC_IDL|STC_DTE) | |
| /* Controller command */ | |
| #define CMC_MASK 0xF | |
| #define CMC_CLR 0x8 /* reset */ | |
| #define CMC_RD 0x1 /* read */ | |
| #define CMC_WR 0x2 /* write */ | |
| #define CMC_RCHK 0x3 /* read check */ | |
| #define CMC_RFMT 0x5 /* read fmt NI */ | |
| #define CMC_WFMT 0x6 /* write fmt NI */ | |
| /* Drive status, ^ = dynamic, * = in unit status */ | |
| #define STD_WRP 0x80 /* ^write prot */ | |
| #define STD_WCK 0x40 /* write check NI */ | |
| #define STD_ILA 0x20 /* *illegal addr */ | |
| #define STD_ILK 0x10 /* ^addr interlock */ | |
| #define STD_MOV 0x08 /* *heads in motion */ | |
| #define STD_INC 0x02 /* seek incomplete NI */ | |
| #define STD_NRDY 0x01 /* ^not ready */ | |
| #define STD_UST (STD_ILA | STD_MOV) /* set from unit */ | |
| #define SETD_EX (STD_WCK | STD_ILA | STD_ILK) /* set examine */ | |
| /* Drive command */ | |
| #define CMD_SK 0x02 /* seek */ | |
| #define CMD_RST 0x01 /* restore */ | |
| /* Head/sector register */ | |
| #define HS_SMASK 0x1F /* sector mask */ | |
| #define HS_V_SRF 5 /* surface */ | |
| #define HS_HMASK 0x20 /* head mask */ | |
| #define HS_MASK (HS_HMASK | HS_SMASK) | |
| #define GET_SEC(x) ((x) & HS_SMASK) | |
| #define GET_SRF(x) (((x) & HS_HMASK) >> HS_V_SRF) | |
| #define GET_SA(p,cy,sf,sc,t) (((((((p)*drv_tab[t].cyl)+(cy))*drv_tab[t].surf)+(sf))* \ | |
| DP_NUMSC)+(sc)) | |
| #define GET_ROTATE(x) ((int) fmod (sim_gtime() / ((double) (x)), \ | |
| ((double) DP_NUMSC))) | |
| /* This controller supports two different disk drive types: | |
| type #sectors/ #surfaces/ #cylinders/ | |
| surface cylinder drive | |
| 2315 24 2 203 | |
| 5440 24 4 408 | |
| In theory, each drive can be a different type. The size field in | |
| each unit selects the drive capacity for each drive and thus the | |
| drive type. DISKS MUST BE DECLARED IN ASCENDING SIZE AND MUST HAVE | |
| THE SAME SECTORS/TRACK. | |
| */ | |
| #define TYPE_2315 0 | |
| #define CYL_2315 203 | |
| #define SURF_2315 2 | |
| #define SIZE_2315 (DP_NUMSC * SURF_2315 * CYL_2315 * DP_NUMBY) | |
| #define TYPE_5440 1 | |
| #define CYL_5440 408 | |
| #define SURF_5440 2 | |
| #define SIZE_5440 (2 * DP_NUMSC * SURF_5440 * CYL_5440 * DP_NUMBY) | |
| struct drvtyp { | |
| int32 cyl; /* cylinders */ | |
| uint32 surf; /* surfaces */ | |
| uint32 size; /* #blocks */ | |
| }; | |
| static struct drvtyp drv_tab[] = { | |
| { CYL_2315, SURF_2315, SIZE_2315 }, | |
| { CYL_5440, SURF_5440, SIZE_5440 }, | |
| { 0 } | |
| }; | |
| extern uint32 int_req[INTSZ], int_enb[INTSZ]; | |
| uint8 dpxb[DP_NUMBY]; /* xfer buffer */ | |
| uint32 dp_bptr = 0; /* buffer ptr */ | |
| uint32 dp_db = 0; /* ctrl buffer */ | |
| uint32 dp_cyl = 0; /* drive buffer */ | |
| uint32 dp_sta = 0; /* ctrl status */ | |
| uint32 dp_cmd = 0; /* ctrl command */ | |
| uint32 dp_plat = 0; /* platter */ | |
| uint32 dp_hdsc = 0; /* head/sector */ | |
| uint32 dp_svun = 0; /* most recent unit */ | |
| uint32 dp_1st = 0; /* first byte */ | |
| uint32 dpd_arm[DP_NUMDR] = { 0 }; /* drives armed */ | |
| int32 dp_stime = 100; /* seek latency */ | |
| int32 dp_rtime = 100; /* rotate latency */ | |
| int32 dp_wtime = 1; /* word time */ | |
| uint8 dp_tplte[(2 * DP_NUMDR) + 2]; /* fix/rmv + ctrl + end */ | |
| DEVICE dp_dev; | |
| uint32 dp (uint32 dev, uint32 op, uint32 dat); | |
| void dp_ini (t_bool dtpl); | |
| t_stat dp_svc (UNIT *uptr); | |
| t_stat dp_reset (DEVICE *dptr); | |
| t_stat dp_attach (UNIT *uptr, char *cptr); | |
| t_stat dp_detach (UNIT *uptr); | |
| t_stat dp_set_size (UNIT *uptr, int32 val, char *cptr, void *desc); | |
| t_stat dp_rds (UNIT *uptr); | |
| t_stat dp_wds (UNIT *uptr); | |
| t_bool dp_dter (UNIT *uptr, uint32 first); | |
| void dp_done (uint32 flg); | |
| extern t_stat id_dboot (int32 u, DEVICE *dptr); | |
| /* DP data structures | |
| dp_dev DP device descriptor | |
| dp_unit DP unit list | |
| dp_reg DP register list | |
| dp_mod DP modifier list | |
| */ | |
| DIB dp_dib = { d_DPC, 0, v_DPC, dp_tplte, &dp, &dp_ini }; | |
| UNIT dp_unit[] = { | |
| { UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+ | |
| UNIT_ROABLE+(TYPE_5440 << UNIT_V_DTYPE), SIZE_5440) }, | |
| { UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+ | |
| UNIT_ROABLE+(TYPE_5440 << UNIT_V_DTYPE), SIZE_5440) }, | |
| { UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+ | |
| UNIT_ROABLE+(TYPE_5440 << UNIT_V_DTYPE), SIZE_5440) }, | |
| { UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+ | |
| UNIT_ROABLE+(TYPE_5440 << UNIT_V_DTYPE), SIZE_5440) } | |
| }; | |
| REG dp_reg[] = { | |
| { HRDATA (CMD, dp_cmd, 3) }, | |
| { HRDATA (STA, dp_sta, 8) }, | |
| { HRDATA (BUF, dp_db, 8) }, | |
| { HRDATA (PLAT, dp_plat, 1) }, | |
| { HRDATA (HDSC, dp_hdsc, 6) }, | |
| { HRDATA (CYL, dp_cyl, 9) }, | |
| { HRDATA (SVUN, dp_svun, 8), REG_HIDDEN }, | |
| { BRDATA (DBUF, dpxb, 16, 8, DP_NUMBY) }, | |
| { HRDATA (DBPTR, dp_bptr, 9), REG_RO }, | |
| { FLDATA (FIRST, dp_1st, 0) }, | |
| { GRDATA (IREQ, int_req[l_DPC], 16, DP_NUMDR + 1, i_DPC) }, | |
| { GRDATA (IENB, int_enb[l_DPC], 16, DP_NUMDR + 1, i_DPC) }, | |
| { BRDATA (IARM, dpd_arm, 16, 1, DP_NUMDR) }, | |
| { DRDATA (RTIME, dp_rtime, 0), PV_LEFT | REG_NZ }, | |
| { DRDATA (STIME, dp_stime, 0), PV_LEFT | REG_NZ }, | |
| { DRDATA (WTIME, dp_wtime, 0), PV_LEFT | REG_NZ }, | |
| { URDATA (UCYL, dp_unit[0].CYL, 16, 9, 0, | |
| DP_NUMDR, REG_RO) }, | |
| { URDATA (UST, dp_unit[0].STD, 16, 8, 0, | |
| DP_NUMDR, REG_RO) }, | |
| { URDATA (CAPAC, dp_unit[0].capac, 10, T_ADDR_W, 0, | |
| DP_NUMDR, PV_LEFT | REG_HRO) }, | |
| { HRDATA (DEVNO, dp_dib.dno, 8), REG_HRO }, | |
| { HRDATA (SELCH, dp_dib.sch, 2), REG_HRO }, | |
| { NULL } | |
| }; | |
| MTAB dp_mod[] = { | |
| { UNIT_WLK, 0, "write enabled", "WRITEENABLED", NULL }, | |
| { UNIT_WLK, UNIT_WLK, "write locked", "LOCKED", NULL }, | |
| { (UNIT_DTYPE+UNIT_ATT), (TYPE_2315 << UNIT_V_DTYPE) + UNIT_ATT, | |
| "2315", NULL, NULL }, | |
| { (UNIT_DTYPE+UNIT_ATT), (TYPE_5440 << UNIT_V_DTYPE) + UNIT_ATT, | |
| "5440", NULL, NULL }, | |
| { (UNIT_AUTO+UNIT_DTYPE+UNIT_ATT), (TYPE_2315 << UNIT_V_DTYPE), | |
| "2315", NULL, NULL }, | |
| { (UNIT_AUTO+UNIT_DTYPE+UNIT_ATT), (TYPE_5440 << UNIT_V_DTYPE), | |
| "5440", NULL, NULL }, | |
| { (UNIT_AUTO+UNIT_ATT), UNIT_AUTO, "autosize", NULL, NULL }, | |
| { UNIT_AUTO, UNIT_AUTO, NULL, "AUTOSIZE", NULL }, | |
| { (UNIT_AUTO+UNIT_DTYPE), (TYPE_2315 << UNIT_V_DTYPE), | |
| NULL, "2315", &dp_set_size }, | |
| { (UNIT_AUTO+UNIT_DTYPE), (TYPE_5440 << UNIT_V_DTYPE), | |
| NULL, "5440", &dp_set_size }, | |
| { MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO", | |
| &set_dev, &show_dev, NULL }, | |
| { MTAB_XTD|MTAB_VDV, 0, "SELCH", "SELCH", | |
| &set_sch, &show_sch, NULL }, | |
| { 0 } | |
| }; | |
| DEVICE dp_dev = { | |
| "DP", dp_unit, dp_reg, dp_mod, | |
| DP_NUMDR, 16, 24, 1, 16, 8, | |
| NULL, NULL, &dp_reset, | |
| &id_dboot, &dp_attach, &dp_detach, | |
| &dp_dib, DEV_DISABLE | DEV_DEBUG | |
| }; | |
| /* Controller: IO routine */ | |
| uint32 dpc (uint32 dev, uint32 op, uint32 dat) | |
| { | |
| uint32 f, t, u; | |
| UNIT *uptr; | |
| static uint8 good_cmd[8] = { 0, 1, 1, 1, 0, 0, 0, 0 }; | |
| switch (op) { /* case IO op */ | |
| case IO_ADR: /* select */ | |
| sch_adr (dp_dib.sch, dev); /* inform sel ch */ | |
| return BY; /* byte only */ | |
| case IO_RD: /* read data */ | |
| if (dp_sta & STC_IDL) /* if idle */ | |
| return GET_ROTATE (dp_rtime); /* return sector */ | |
| else dp_sta = dp_sta | STA_BSY; /* xfr? set busy */ | |
| return dp_db; /* return data */ | |
| case IO_WD: /* write data */ | |
| if (DEBUG_PRS (dp_dev)) fprintf (sim_deb, | |
| ">>DPC WD = %02X, STA = %02X\n", dat, dp_sta); | |
| if (dp_sta & STC_IDL) /* idle? hdsc */ | |
| dp_hdsc = dat & HS_MASK; | |
| else { /* data xfer */ | |
| dp_sta = dp_sta | STA_BSY; /* set busy */ | |
| dp_db = dat & 0xFF; /* store data */ | |
| } | |
| break; | |
| case IO_SS: /* status */ | |
| t = dp_sta & STC_MASK; /* get status */ | |
| if (t & SETC_EX) /* test for EX */ | |
| t = t | STA_EX; | |
| return t; | |
| case IO_OC: /* command */ | |
| if (DEBUG_PRS (dp_dev)) fprintf (sim_deb, | |
| ">>DPC OC = %02X, STA = %02X\n", dat, dp_sta); | |
| f = dat & CMC_MASK; /* get cmd */ | |
| if (f & CMC_CLR) { /* clear? */ | |
| dp_reset (&dp_dev); /* reset world */ | |
| break; | |
| } | |
| u = (dp_svun - dp_dib.dno - o_DP0) / o_DP0; /* get unit */ | |
| uptr = dp_dev.units + u; /* ignore if busy */ | |
| if (!(dp_sta & STC_IDL) || sim_is_active (uptr)) | |
| break; | |
| dp_cmd = f; /* save cmd */ | |
| if (dp_cmd == CMC_WR) /* write: bsy=0 else */ | |
| dp_sta = 0; | |
| else dp_sta = STA_BSY; /* bsy=1,idl,err=0 */ | |
| dp_1st = 1; /* xfr not started */ | |
| dp_bptr = 0; /* buffer empty */ | |
| if (dp_svun & o_DPF) /* upper platter? */ | |
| dp_plat = 1; | |
| else dp_plat = 0; /* no, lower */ | |
| if (good_cmd[f]) /* legal? sched */ | |
| sim_activate (uptr, dp_rtime); | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* Drives: IO routine */ | |
| uint32 dp (uint32 dev, uint32 op, uint32 dat) | |
| { | |
| int32 diff; | |
| uint32 t, u; | |
| UNIT *uptr; | |
| if (dev == dp_dib.dno) /* controller? */ | |
| return dpc (dev, op, dat); | |
| u = (dev - dp_dib.dno - o_DP0) / o_DP0; /* get unit num */ | |
| uptr = dp_dev.units + u; /* get unit ptr */ | |
| switch (op) { /* case IO op */ | |
| case IO_ADR: /* select */ | |
| if (dp_sta & STC_IDL) /* idle? save unit */ | |
| dp_svun = dev; | |
| return BY; /* byte only */ | |
| case IO_WD: /* write data */ | |
| if (DEBUG_PRS (dp_dev)) | |
| fprintf (sim_deb, ">>DP%d WD = %02X, STA = %02X\n", | |
| u, dat, dp_sta); | |
| if (GET_DTYPE (uptr->flags) == TYPE_2315) /* 2.5MB drive? */ | |
| dp_cyl = dat & 0xFF; /* cyl is 8b */ | |
| else dp_cyl = ((dp_cyl << 8) | dat) & DMASK16; /* insert byte */ | |
| break; | |
| case IO_SS: /* status */ | |
| if (uptr->flags & UNIT_ATT) t = /* onl? */ | |
| ((uptr->flags & UNIT_WPRT)? STD_WRP: 0) | | |
| ((dp_sta & STC_IDL)? 0: STD_ILK) | | |
| (uptr->STD & STD_UST); | |
| else t = STD_MOV | STD_NRDY; /* off = X'09' */ | |
| if (t & SETD_EX) /* test for ex */ | |
| t = t | STA_EX; | |
| return t; | |
| case IO_OC: /* command */ | |
| if (DEBUG_PRS (dp_dev)) | |
| fprintf (sim_deb, ">>DP%d OC = %02X, STA = %02X\n", | |
| u, dat, dp_sta); | |
| dpd_arm[u] = int_chg (v_DPC + u + 1, dat, dpd_arm[u]); | |
| if (dat & CMD_SK) /* seek? get cyl */ | |
| t = dp_cyl; | |
| else if (dat & CMD_RST) /* rest? cyl 0 */ | |
| t = 0; | |
| else break; /* no action */ | |
| diff = t - uptr->CYL; | |
| if (diff < 0) /* ABS cyl diff */ | |
| diff = -diff; | |
| else if (diff == 0) /* must be nz */ | |
| diff = 1; | |
| uptr->STD = STD_MOV; /* stat = moving */ | |
| uptr->CYL = t; /* put on cyl */ | |
| sim_activate (uptr, diff * dp_stime); /* schedule */ | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* Unit service | |
| If seek done, on cylinder; | |
| if read check, signal completion; | |
| else, do read or write | |
| */ | |
| t_stat dp_svc (UNIT *uptr) | |
| { | |
| uint32 u = uptr - dp_dev.units; /* get unit number */ | |
| int32 cyl = uptr->CYL; /* get cylinder */ | |
| uint32 dtype = GET_DTYPE (uptr->flags); /* get drive type */ | |
| t_stat r; | |
| if (uptr->STD & STD_MOV) { /* seek? */ | |
| uptr->STD = 0; /* clr seek in prog */ | |
| if ((uptr->flags & UNIT_ATT) == 0) /* offl? hangs */ | |
| return SCPE_OK; | |
| if (cyl >= drv_tab[dtype].cyl) { /* bad cylinder? */ | |
| uptr->STD = STD_ILA; /* error */ | |
| uptr->CYL = drv_tab[dtype].cyl - 1; /* put at edge */ | |
| } | |
| if (dpd_arm[u]) /* req intr */ | |
| SET_INT (v_DPC + u + 1); | |
| return SCPE_OK; | |
| } | |
| switch (dp_cmd & 0x7) { /* case on func */ | |
| case CMC_RCHK: /* read check */ | |
| dp_dter (uptr, 1); /* check xfr err */ | |
| break; | |
| case CMC_RD: /* read */ | |
| if (sch_actv (dp_dib.sch, dp_dib.dno)) { /* sch transfer? */ | |
| if (dp_dter (uptr, dp_1st)) /* check xfr err */ | |
| return SCPE_OK; | |
| if ((r = dp_rds (uptr))) /* read sec, err? */ | |
| return r; | |
| dp_1st = 0; | |
| sch_wrmem (dp_dib.sch, dpxb, DP_NUMBY); /* write to memory */ | |
| if (sch_actv (dp_dib.sch, dp_dib.dno)) { /* more to do? */ | |
| sim_activate (uptr, dp_rtime); /* reschedule */ | |
| return SCPE_OK; | |
| } | |
| break; /* no, set done */ | |
| } | |
| dp_sta = dp_sta | STC_DTE; /* can't work */ | |
| break; | |
| case CMC_WR: /* write */ | |
| if (sch_actv (dp_dib.sch, dp_dib.dno)) { /* sch transfer? */ | |
| if (dp_dter (uptr, dp_1st)) /* check xfr err */ | |
| return SCPE_OK; | |
| dp_bptr = sch_rdmem (dp_dib.sch, dpxb, DP_NUMBY); /* read from mem */ | |
| dp_db = dpxb[dp_bptr - 1]; /* last byte */ | |
| if ((r = dp_wds (uptr))) /* write sec, err? */ | |
| return r; | |
| dp_1st = 0; | |
| if (sch_actv (dp_dib.sch, dp_dib.dno)) { /* more to do? */ | |
| sim_activate (uptr, dp_rtime); /* reschedule */ | |
| return SCPE_OK; | |
| } | |
| break; /* no, set done */ | |
| } | |
| dp_sta = dp_sta | STC_DTE; /* can't work */ | |
| break; | |
| } /* end case func */ | |
| dp_done (0); /* done */ | |
| return SCPE_OK; | |
| } | |
| /* Read data sector */ | |
| t_stat dp_rds (UNIT *uptr) | |
| { | |
| uint32 i; | |
| i = fxread (dpxb, sizeof (uint8), DP_NUMBY, uptr->fileref); | |
| for ( ; i < DP_NUMBY; i++) /* fill with 0's */ | |
| dpxb[i] = 0; | |
| if (ferror (uptr->fileref)) { /* error? */ | |
| sim_perror ("DP I/O error"); | |
| clearerr (uptr->fileref); | |
| dp_done (STC_DTE); | |
| return SCPE_IOERR; | |
| } | |
| return SCPE_OK; | |
| } | |
| /* Write data sector */ | |
| t_stat dp_wds (UNIT *uptr) | |
| { | |
| for ( ; dp_bptr < DP_NUMBY; dp_bptr++) | |
| dpxb[dp_bptr] = dp_db; /* fill with last */ | |
| fxwrite (dpxb, sizeof (uint8), DP_NUMBY, uptr->fileref); | |
| if (ferror (uptr->fileref)) { /* error? */ | |
| sim_perror ("DP I/O error"); | |
| clearerr (uptr->fileref); | |
| dp_done (STC_DTE); | |
| return SCPE_IOERR; | |
| } | |
| return SCPE_OK; | |
| } | |
| /* Data transfer error test routine */ | |
| t_bool dp_dter (UNIT *uptr, uint32 first) | |
| { | |
| uint32 hd, sc, sa; | |
| uint32 dtype = GET_DTYPE (uptr->flags); /* get drive type */ | |
| if (((uptr->flags & UNIT_ATT) == 0) || /* not attached? */ | |
| ((uptr->flags & UNIT_WPRT) && (dp_cmd == CMC_WR))) { | |
| dp_done (STC_DTE); /* error, done */ | |
| return TRUE; | |
| } | |
| hd = GET_SRF (dp_hdsc); /* get head */ | |
| sc = GET_SEC (dp_hdsc); /* get sector */ | |
| if (dp_cyl != (uint32) uptr->CYL) { /* wrong cylinder? */ | |
| if (dp_cyl == 0) | |
| uptr->CYL = 0; | |
| else { | |
| dp_done (STC_ACF); /* error, done */ | |
| return TRUE; | |
| } | |
| } | |
| if (sc >= DP_NUMSC) { /* bad sector? */ | |
| dp_done (STC_OVR); /* error, done */ | |
| return TRUE; | |
| } | |
| if (!first && (sc == 0) && (hd == 0)) { /* cyl overflow? */ | |
| dp_done (STC_CYO); /* error, done */ | |
| return TRUE; | |
| } | |
| sa = GET_SA (dp_plat, uptr->CYL, hd, sc, dtype); /* curr disk addr */ | |
| fseek (uptr->fileref, sa * DP_NUMBY, SEEK_SET); | |
| if ((sc + 1) < DP_NUMSC) /* end of track? */ | |
| dp_hdsc = dp_hdsc + 1; | |
| else dp_hdsc = (dp_hdsc ^ HS_HMASK) & HS_HMASK; /* sec 0, nxt srf */ | |
| return FALSE; | |
| } | |
| /* Data transfer done routine */ | |
| void dp_done (uint32 flg) | |
| { | |
| dp_sta = (dp_sta | STC_IDL | flg) & ~STA_BSY; /* set flag, idle */ | |
| SET_INT (v_DPC); /* unmaskable intr */ | |
| if (flg) /* if err, stop ch */ | |
| sch_stop (dp_dib.sch); | |
| return; | |
| } | |
| /* Reset routine */ | |
| t_stat dp_reset (DEVICE *dptr) | |
| { | |
| uint32 u; | |
| UNIT *uptr; | |
| dp_cmd = 0; /* clear cmd */ | |
| dp_sta = STA_BSY | STC_IDL; /* idle, busy */ | |
| dp_1st = 0; /* clear flag */ | |
| dp_svun = dp_db = 0; /* clear unit, buf */ | |
| dp_plat = 0; | |
| dp_hdsc = 0; /* clear addr */ | |
| CLR_INT (v_DPC); /* clear ctrl int */ | |
| SET_ENB (v_DPC); /* always enabled */ | |
| for (u = 0; u < DP_NUMDR; u++) { /* loop thru units */ | |
| uptr = dp_dev.units + u; | |
| uptr->CYL = uptr->STD = 0; | |
| CLR_INT (v_DPC + u + 1); /* clear intr */ | |
| CLR_ENB (v_DPC + u + 1); /* clear enable */ | |
| dpd_arm[u] = 0; /* clear arm */ | |
| sim_cancel (uptr); /* cancel activity */ | |
| } | |
| return SCPE_OK; | |
| } | |
| /* Attach routine (with optional autosizing) */ | |
| t_stat dp_attach (UNIT *uptr, char *cptr) | |
| { | |
| uint32 i, p; | |
| t_stat r; | |
| uptr->capac = drv_tab[GET_DTYPE (uptr->flags)].size; | |
| r = attach_unit (uptr, cptr); /* attach unit */ | |
| if (r != SCPE_OK) /* error? */ | |
| return r; | |
| uptr->CYL = 0; | |
| if ((uptr->flags & UNIT_AUTO) == 0) /* autosize? */ | |
| return SCPE_OK; | |
| if ((p = ftell (uptr->fileref)) == 0) | |
| return SCPE_OK; | |
| for (i = 0; drv_tab[i].surf != 0; i++) { | |
| if (p <= drv_tab[i].size) { | |
| uptr->flags = (uptr->flags & ~UNIT_DTYPE) | (i << UNIT_V_DTYPE); | |
| uptr->capac = drv_tab[i].size; | |
| return SCPE_OK; | |
| } | |
| } | |
| return SCPE_OK; | |
| } | |
| /* Detach routine (generates an interrupt) */ | |
| t_stat dp_detach (UNIT *uptr) | |
| { | |
| uint32 u = uptr - dp_dev.units; | |
| if (!(uptr->flags & UNIT_ATT)) /* attached? */ | |
| return SCPE_OK; | |
| if (dpd_arm[u]) /* if arm, intr */ | |
| SET_INT (v_DPC + u + 1); | |
| return detach_unit (uptr); | |
| } | |
| /* Set size command validation routine */ | |
| t_stat dp_set_size (UNIT *uptr, int32 val, char *cptr, void *desc) | |
| { | |
| if (uptr->flags & UNIT_ATT) | |
| return SCPE_ALATT; | |
| uptr->capac = drv_tab[GET_DTYPE (val)].size; | |
| return SCPE_OK; | |
| } | |
| /* Create device number (T) or interrupt (F) template */ | |
| void dp_ini (t_bool dtpl) | |
| { | |
| int32 u, j, dev; | |
| dp_tplte[0] = 0; /* controller */ | |
| for (u = 0, j = 1; u < DP_NUMDR; u++) { /* loop thru units */ | |
| dev = (u + 1) * o_DP0; /* drive dev # */ | |
| dp_tplte[j++] = dev; | |
| if (dtpl && (GET_DTYPE (dp_unit[u].flags) == TYPE_5440)) | |
| dp_tplte[j++] = dev + o_DPF; /* if fixed */ | |
| } | |
| dp_tplte[j] = TPL_END; /* end marker */ | |
| return; | |
| } |