| /* | |
| Copyright (c) 2015-2016, John Forecast | |
| Permission is hereby granted, free of charge, to any person obtaining a | |
| copy of this software and associated documentation files (the "Software"), | |
| to deal in the Software without restriction, including without limitation | |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| and/or sell copies of the Software, and to permit persons to whom the | |
| Software is furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be included in | |
| all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| JOHN FORECAST BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| Except as contained in this notice, the name of John Forecast shall not | |
| be used in advertising or otherwise to promote the sale, use or other dealings | |
| in this Software without prior written authorization from John Forecast. | |
| */ | |
| /* cdc1700_defs.h: CDC1700 simulator definitions | |
| */ | |
| #ifndef _CDC1700_DEFS_H | |
| #define _CDC1700_DEFS_H | |
| #include "sim_defs.h" | |
| #include "sim_tape.h" | |
| #define DBGOUT (sim_deb != NULL ? sim_deb : stdout) | |
| /* | |
| * Private status codes | |
| */ | |
| #define SCPE_LOOP 1 /* Indirect addressing loop */ | |
| #define SCPE_SSTOP 2 /* Selective stop */ | |
| #define SCPE_INVEXI 3 /* Invalid bit in EXI delta */ | |
| #define SCPE_IBKPT 4 /* Breakpoint */ | |
| #define SCPE_REJECT 5 /* Stop on reject */ | |
| /* | |
| * Private device flags | |
| */ | |
| #define DEV_V_REJECT (DEV_V_UF + 1) /* Stop on reject enabled */ | |
| #define DEV_V_NOEQUIP (DEV_V_UF + 2) /* Not an equipment device */ | |
| #define DEV_V_INDEV (DEV_V_UF + 3) /* Input device for IO_DEVICE */ | |
| #define DEV_V_OUTDEV (DEV_V_UF + 4) /* Output device for IO_DEVICE */ | |
| #define DEV_V_PROTECT (DEV_V_UF + 5) /* Device supports protection */ | |
| #define DEV_V_PROTECTED (DEV_V_UF + 6) /* Device protection enabled */ | |
| #define DEV_V_REVERSE (DEV_V_UF + 7) /* DP reverse addressing */ | |
| #define DEV_V_FIXED (DEV_V_UF + 7) /* CDD fixed drive first addressing */ | |
| #define DEV_REJECT (1 << DEV_V_REJECT) | |
| #define DEV_NOEQUIP (1 << DEV_V_NOEQUIP) | |
| #define DEV_INDEV (1 << DEV_V_INDEV) | |
| #define DEV_OUTDEV (1 << DEV_V_OUTDEV) | |
| #define DEV_PROTECT (1 << DEV_V_PROTECT) | |
| #define DEV_PROTECTED (1 << DEV_V_PROTECTED) | |
| #define DEV_REVERSE (1 << DEV_V_REVERSE) | |
| #define DEV_FIXED (1 << DEV_V_FIXED) | |
| /* | |
| * CPU debug flags | |
| */ | |
| #define DBG_V_DISASS 0 /* Disassemble on execution */ | |
| #define DBG_V_IDISASS 1 /* Disassemble during interrupt */ | |
| #define DBG_V_INTR 2 /* Indicate interrupt execution */ | |
| #define DBG_V_TRACE 3 /* Trace register content */ | |
| #define DBG_V_ITRACE 4 /* Trace during interrupt */ | |
| #define DBG_V_TARGET 5 /* Output target address */ | |
| #define DBG_V_INPUT 6 /* Trace input operations */ | |
| #define DBG_V_OUTPUT 7 /* Trace output operations */ | |
| #define DBG_V_FULL 8 /* Full Trace (emulator debug) */ | |
| #define DBG_V_INTLVL 9 /* Prefix with interrupt level */ | |
| #define DBG_V_PROTECT 10 /* Display protect fault information */ | |
| #define DBG_V_MISSING 11 /* Display access to missing devices */ | |
| #define DBG_DISASS (1 << DBG_V_DISASS) | |
| #define DBG_IDISASS (1 << DBG_V_IDISASS) | |
| #define DBG_INTR (1 << DBG_V_INTR) | |
| #define DBG_TRACE (1 << DBG_V_TRACE) | |
| #define DBG_ITRACE (1 << DBG_V_ITRACE) | |
| #define DBG_TARGET (1 << DBG_V_TARGET) | |
| #define DBG_INPUT (1 << DBG_V_INPUT) | |
| #define DBG_OUTPUT (1 << DBG_V_OUTPUT) | |
| #define DBG_FULL (1 << DBG_V_FULL) | |
| #define DBG_INTLVL (1 << DBG_V_INTLVL) | |
| #define DBG_PROTECT (1 << DBG_V_PROTECT) | |
| #define DBG_MISSING (1 << DBG_V_MISSING) | |
| /* | |
| * Default device radix | |
| */ | |
| #define DEV_RDX 16 | |
| /* | |
| * Private unit flags | |
| */ | |
| #define UNIT_V_7TRACK (MTUF_V_UF + 0) /* 7-track tape transport */ | |
| #define UNIT_V_WPROT (MTUF_V_UF + 1) /* Write protected */ | |
| #define UNIT_V_854 (UNIT_V_UF + 0) /* 854 vs. 853 disk pack drive */ | |
| #define UNIT_V_856_4 (UNIT_V_UF + 0) /* 856_4 vs. 856_2 drive */ | |
| #define UNIT_7TRACK (1 << UNIT_V_7TRACK) | |
| #define UNIT_WPROT (1 << UNIT_V_WPROT) | |
| #define UNIT_854 (1 << UNIT_V_854) | |
| #define UNIT_856_4 (1 << UNIT_V_856_4) | |
| /* | |
| * CPU | |
| */ | |
| #define MAXMEMSIZE 65536 | |
| #define DEFAULTMEMSIZE 32768 | |
| /* | |
| * Compute the actual memory address based on the amount of memory installed | |
| * on the system. Note we only support power of 2 memories like the real | |
| * hardware - the system reference manual says that 12K and 24K systems are | |
| * possible but not supported by standard software. | |
| */ | |
| #define MEMADDR(p) ((p) & (cpu_unit.capac - 1)) | |
| /* | |
| * Protect bit access | |
| */ | |
| #define SETPROTECT(a) P[MEMADDR(a)] = 1 | |
| #define CLRPROTECT(a) P[MEMADDR(a)] = 0 | |
| #define ISPROTECTED(a) P[MEMADDR(a)] | |
| /* | |
| * Max count of indirect addressing. Used to avoid infinite loops. | |
| */ | |
| #define MAXINDIRECT 10000 | |
| /* | |
| * Register access | |
| */ | |
| #define INCP Preg = MEMADDR(Preg + 1) | |
| /* | |
| * I/O operations | |
| */ | |
| enum IOstatus { | |
| IO_REPLY, /* Device sent a reply */ | |
| IO_REJECT, /* Device sent a reject */ | |
| IO_INTERNALREJECT /* I/O rejected internally */ | |
| }; | |
| #define SIGN 0x8000 | |
| #define MAXPOS 0x7FFF | |
| #define MAXNEG 0xFFFF | |
| #define ABS(v) (((v) & SIGN) ? ~(v) : (v)) | |
| /* | |
| * Instruction layout: | |
| * | |
| * Storage reference instructions: | |
| * | |
| * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 | |
| * +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ | |
| * | op |re|in|i1|i2| delta | | |
| * +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ | |
| * | |
| * Register reference instructions: | |
| * | |
| * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 | |
| * +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ | |
| * | 0 0 0 0| F1 | modifier | | |
| * +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ | |
| * | |
| * Inter-register instructions: | |
| * | |
| * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 | |
| * +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ | |
| * | 0 0 0 0| 1 0 0 0|lp|xr| origin | dest | | |
| * +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ | |
| * | |
| * Shift instructions: | |
| * | |
| * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 | |
| * +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ | |
| * | 0 0 0 0| 1 1 1 1|LR| A| Q| count | | |
| * +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ | |
| * | |
| * Skip instructions: | |
| * | |
| * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 | |
| * +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ | |
| * | 0 0 0 0| 0 0 0 1| type | count | | |
| * +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ | |
| */ | |
| #define MOD_RE 0x800 | |
| #define MOD_IN 0x400 | |
| #define MOD_I1 0x200 | |
| #define MOD_I2 0x100 | |
| #define ISCONSTANT(i) ((i & (MOD_RE | MOD_IN | 0xFF)) == 0) | |
| #define OPC_MASK 0xF000 | |
| #define OPC_ADQ 0xF000 | |
| #define OPC_LDQ 0xE000 | |
| #define OPC_RAO 0xD000 | |
| #define OPC_LDA 0xC000 | |
| #define OPC_EOR 0xB000 | |
| #define OPC_AND 0xA000 | |
| #define OPC_SUB 0x9000 | |
| #define OPC_ADD 0x8000 | |
| #define OPC_SPA 0x7000 | |
| #define OPC_STA 0x6000 | |
| #define OPC_RTJ 0x5000 | |
| #define OPC_STQ 0x4000 | |
| #define OPC_DVI 0x3000 | |
| #define OPC_MUI 0x2000 | |
| #define OPC_JMP 0x1000 | |
| #define OPC_SPECIAL 0x0000 | |
| #define OPC_SPECIALMASK 0x0F00 | |
| #define OPC_SLS 0x0000 | |
| #define OPC_SKIPS 0x0100 | |
| #define OPC_SKIPMASK 0x00F0 | |
| #define OPC_SKIPCOUNT 0x000F | |
| #define OPC_SAZ (OPC_SKIPS | 0x00) | |
| #define OPC_SAN (OPC_SKIPS | 0x10) | |
| #define OPC_SAP (OPC_SKIPS | 0x20) | |
| #define OPC_SAM (OPC_SKIPS | 0x30) | |
| #define OPC_SQZ (OPC_SKIPS | 0x40) | |
| #define OPC_SQN (OPC_SKIPS | 0x50) | |
| #define OPC_SQP (OPC_SKIPS | 0x60) | |
| #define OPC_SQM (OPC_SKIPS | 0x70) | |
| #define OPC_SWS (OPC_SKIPS | 0x80) | |
| #define OPC_SWN (OPC_SKIPS | 0x90) | |
| #define OPC_SOV (OPC_SKIPS | 0xA0) | |
| #define OPC_SNO (OPC_SKIPS | 0xB0) | |
| #define OPC_SPE (OPC_SKIPS | 0xC0) | |
| #define OPC_SNP (OPC_SKIPS | 0xD0) | |
| #define OPC_SPF (OPC_SKIPS | 0xE0) | |
| #define OPC_SNF (OPC_SKIPS | 0xF0) | |
| #define OPC_INP 0x0200 | |
| #define OPC_OUT 0x0300 | |
| #define OPC_EIN 0x0400 | |
| #define OPC_IIN 0x0500 | |
| #define OPC_ECA 0x0580 | |
| #define OPC_DCA 0x05C0 | |
| #define OPC_SPB 0x0600 | |
| #define OPC_CPB 0x0700 | |
| #define OPC_INTER 0x0800 | |
| #define MOD_LP 0x80 | |
| #define MOD_XR 0x40 | |
| #define MOD_O_A 0x20 | |
| #define MOD_O_Q 0x10 | |
| #define MOD_O_M 0x08 | |
| #define MOD_D_A 0x04 | |
| #define MOD_D_Q 0x02 | |
| #define MOD_D_M 0x01 | |
| #define OPC_AAM (OPC_INTER | MOD_O_A | MOD_O_M) | |
| #define OPC_AAQ (OPC_INTER | MOD_O_A | MOD_O_Q) | |
| #define OPC_AAB (OPC_INTER | MOD_O_A | MOD_O_Q | MOD_O_M) | |
| #define OPC_CLR (OPC_INTER | MOD_XR) | |
| #define OPC_TCM (OPC_INTER | MOD_XR | MOD_O_M) | |
| #define OPC_TCQ (OPC_INTER | MOD_XR | MOD_O_Q) | |
| #define OPC_TCB (OPC_INTER | MOD_XR | MOD_O_Q | MOD_O_M) | |
| #define OPC_TCA (OPC_INTER | MOD_XR | MOD_O_A) | |
| #define OPC_EAM (OPC_INTER | MOD_XR | MOD_O_A | MOD_O_M) | |
| #define OPC_EAQ (OPC_INTER | MOD_XR | MOD_O_A | MOD_O_Q) | |
| #define OPC_EAB (OPC_INTER | MOD_XR | MOD_O_A | MOD_O_Q | MOD_O_M) | |
| #define OPC_SET (OPC_INTER | MOD_LP) | |
| #define OPC_TRM (OPC_INTER | MOD_LP | MOD_O_M) | |
| #define OPC_TRQ (OPC_INTER | MOD_LP | MOD_O_Q) | |
| #define OPC_TRB (OPC_INTER | MOD_LP | MOD_O_Q | MOD_O_M) | |
| #define OPC_TRA (OPC_INTER | MOD_LP | MOD_O_A) | |
| #define OPC_LAM (OPC_INTER | MOD_LP | MOD_O_A | MOD_O_M) | |
| #define OPC_LAQ (OPC_INTER | MOD_LP | MOD_O_A | MOD_O_Q) | |
| #define OPC_LAB (OPC_INTER | MOD_LP | MOD_O_A | MOD_O_Q | MOD_O_M) | |
| #define OPC_CAM (OPC_INTER | MOD_LP | MOD_XR | MOD_O_A | MOD_O_M) | |
| #define OPC_CAQ (OPC_INTER | MOD_LP | MOD_XR | MOD_O_A | MOD_O_Q) | |
| #define OPC_CAB (OPC_INTER | MOD_LP | MOD_XR | MOD_O_A | MOD_O_Q | MOD_O_M) | |
| #define OPC_INA 0x0900 | |
| #define OPC_ENA 0x0A00 | |
| #define OPC_NOP 0x0B00 | |
| #define OPC_ENQ 0x0C00 | |
| #define OPC_INQ 0x0D00 | |
| #define OPC_EXI 0x0E00 | |
| #define OPC_MODMASK 0x00FF | |
| #define EXTEND16(v) ((v) & 0x8000) ? (v) | 0xFFFF0000 : (v) | |
| #define EXTEND8(v) ((v) & 0x80) ? (v) | 0xFF00 : (v) | |
| #define EXTEND4(v) ((v) & 0x8) ? (v) | 0xFFF0 : (v) | |
| #define TRUNC16(v) ((v) & 0xFFFF) | |
| #define CANEXTEND8(v) (((v) & 0xFF80) == 0xFF80) | |
| #define OPC_SHIFTS 0x0F00 | |
| #define OPC_SHIFTMASK 0x00E0 | |
| #define MOD_LR 0x80 | |
| #define MOD_S_A 0x40 | |
| #define MOD_S_Q 0x20 | |
| #define OPC_SHIFTCOUNT 0x001F | |
| #define OPC_ADDRMASK 0x00FF | |
| #define OPC_QRS (OPC_SHIFTS | MOD_S_Q) | |
| #define OPC_ARS (OPC_SHIFTS | MOD_S_A) | |
| #define OPC_LRS (OPC_SHIFTS | MOD_S_A | MOD_S_Q) | |
| #define OPC_QLS (OPC_SHIFTS | MOD_LR | MOD_S_Q) | |
| #define OPC_ALS (OPC_SHIFTS | MOD_LR | MOD_S_A) | |
| #define OPC_LLS (OPC_SHIFTS | MOD_LR | MOD_S_A | MOD_S_Q) | |
| /* | |
| * Interrupt vector definitions | |
| */ | |
| #define INTERRUPT_BASE 0x100 | |
| #define INTERRUPT_00 (INTERRUPT_BASE + 0x00) | |
| #define INTERRUPT_01 (INTERRUPT_BASE + 0x04) | |
| #define INTERRUPT_02 (INTERRUPT_BASE + 0x08) | |
| #define INTERRUPT_03 (INTERRUPT_BASE + 0x0C) | |
| #define INTERRUPT_04 (INTERRUPT_BASE + 0x10) | |
| #define INTERRUPT_05 (INTERRUPT_BASE + 0x14) | |
| #define INTERRUPT_06 (INTERRUPT_BASE + 0x18) | |
| #define INTERRUPT_07 (INTERRUPT_BASE + 0x1C) | |
| #define INTERRUPT_08 (INTERRUPT_BASE + 0x20) | |
| #define INTERRUPT_09 (INTERRUPT_BASE + 0x24) | |
| #define INTERRUPT_10 (INTERRUPT_BASE + 0x28) | |
| #define INTERRUPT_11 (INTERRUPT_BASE + 0x2C) | |
| #define INTERRUPT_12 (INTERRUPT_BASE + 0x30) | |
| #define INTERRUPT_13 (INTERRUPT_BASE + 0x34) | |
| #define INTERRUPT_14 (INTERRUPT_BASE + 0x38) | |
| #define INTERRUPT_15 (INTERRUPT_BASE + 0x3C) | |
| #define INTR_BASIC 2 | |
| #define INTR_1705 16 | |
| /* | |
| * I/O definitions. | |
| */ | |
| #define IO_CONTINUE 0x8000 | |
| #define IO_W 0x7800 | |
| #define IO_EQUIPMENT 0x0780 | |
| #define IO_COMMAND 0x007F | |
| /* | |
| * Standard director functions | |
| */ | |
| #define IO_DIR_STOP 0x0040 /* Stop motion */ | |
| #define IO_DIR_START 0x0020 /* Start motion */ | |
| #define IO_DIR_ALARM 0x0010 /* Alarm int req. */ | |
| #define IO_DIR_EOP 0x0008 /* End of operation int req. */ | |
| #define IO_DIR_DATA 0x0004 /* Data int req. */ | |
| #define IO_DIR_CINT 0x0002 /* Clear interrupts */ | |
| #define IO_DIR_CCONT 0x0001 /* Clear controller */ | |
| /* | |
| * Illegal combination of functions - Start + Stop | |
| */ | |
| #define STARTSTOP(v) (((v) & \ | |
| (IO_DIR_START | IO_DIR_STOP)) == \ | |
| (IO_DIR_START | IO_DIR_STOP)) | |
| /* | |
| * Standard status bits | |
| */ | |
| #define IO_ST_PARITY 0x0100 /* Parity error */ | |
| #define IO_ST_PROT 0x0080 /* Protected */ | |
| #define IO_ST_LOST 0x0040 /* Lost data */ | |
| #define IO_ST_ALARM 0x0020 /* Alarm */ | |
| #define IO_ST_EOP 0x0010 /* End of operation */ | |
| #define IO_ST_DATA 0x0008 /* Data */ | |
| #define IO_ST_INT 0x0004 /* Interrupt */ | |
| #define IO_ST_BUSY 0x0002 /* Device busy */ | |
| #define IO_ST_READY 0x0001 /* Device ready */ | |
| /* | |
| * The following type/values may be used to differentiate processing when | |
| * a single device driver is used to emulate multiple controller types (e.g. | |
| * the LP device driver emulates both 1740 and 1742-30/-120 controllers). | |
| */ | |
| enum IOdevtype { | |
| IOtype_default, /* Initial value */ | |
| IOtype_dev1, /* Device specific values */ | |
| IOtype_dev2, | |
| IOtype_dev3, | |
| IOtype_dev4, | |
| IOtype_dev5, | |
| IOtype_dev6, | |
| IOtype_dev7, | |
| IOtype_dev8 | |
| }; | |
| /* | |
| * I/O framework device structure | |
| */ | |
| struct io_device { | |
| const char *iod_name; | |
| const char *iod_model; | |
| enum IOdevtype iod_type; | |
| uint8 iod_equip; | |
| uint8 iod_station; | |
| uint16 iod_interrupt; | |
| uint16 iod_dcbase; | |
| DEVICE *iod_indev; | |
| DEVICE *iod_outdev; | |
| UNIT *iod_unit; | |
| t_bool (*iod_reject)(struct io_device *, t_bool, uint8); | |
| enum IOstatus (*iod_IOread)(struct io_device *, uint8); | |
| enum IOstatus (*iod_IOwrite)(struct io_device *, uint8); | |
| enum IOstatus (*iod_BDCread)(struct io_device *, uint16 *, uint8); | |
| enum IOstatus (*iod_BDCwrite)(struct io_device *, uint16 *, uint8); | |
| void (*iod_state)(const char *, DEVICE *, struct io_device *); | |
| t_bool (*iod_intr)(struct io_device *); | |
| uint16 (*iod_raised)(DEVICE *); | |
| void (*iod_clear)(DEVICE *); | |
| uint16 iod_ienable; | |
| uint16 iod_oldienable; | |
| uint16 iod_imask; | |
| uint16 iod_dmask; | |
| uint16 iod_smask; | |
| uint16 iod_cmask; | |
| uint16 iod_rmask; | |
| uint8 iod_regs; | |
| uint8 iod_validmask; | |
| uint8 iod_readmap; | |
| uint8 iod_rejmapR; | |
| uint8 iod_rejmapW; | |
| uint8 iod_flags; | |
| uint8 iod_dc; | |
| uint16 iod_readR[8]; | |
| uint16 iod_writeR[8]; | |
| uint16 iod_prevR[8]; | |
| uint16 iod_forced; | |
| t_uint64 iod_event; | |
| uint16 iod_private; | |
| void *iod_private2; | |
| uint16 iod_private3; | |
| t_bool iod_private4; | |
| const char *iod_private5; | |
| uint16 iod_private6; | |
| uint16 iod_private7; | |
| uint16 iod_private8; | |
| uint8 iod_private9; | |
| t_bool iod_private10; | |
| }; | |
| #define STATUS iod_readR[1] | |
| #define DEVSTATUS(iod) ((iod)->iod_readR[1]) | |
| #define DCSTATUS(iod) ((iod)->iod_readR[2]) | |
| #define FUNCTION iod_writeR[1] | |
| #define IENABLE iod_ienable | |
| #define OLDIENABLE iod_oldienable | |
| #define ENABLED(iod) ((iod)->iod_ienable) | |
| #define ISENABLED(iod, mask) \ | |
| (((iod)->iod_ienable & mask) != 0) | |
| #define SETSTICKY(iod, reg, value) \ | |
| ((iod)->iod_sticky[reg] |= value) | |
| #define CLRSTICKY(iod, reg, value) \ | |
| ((iod)->iod_sticky[reg] &= ~value) | |
| #define MASK_REGISTER0 0x01 | |
| #define MASK_REGISTER1 0x02 | |
| #define MASK_REGISTER2 0x04 | |
| #define MASK_REGISTER3 0x08 | |
| #define MASK_REGISTER4 0x10 | |
| #define MASK_REGISTER5 0x20 | |
| #define MASK_REGISTER6 0x40 | |
| #define MASK_REGISTER7 0x80 | |
| #define STATUS_ZERO 0x01 | |
| #define DEVICE_DC 0x02 | |
| #define AQ_ONLY 0x04 | |
| #define IODEV(name, model, id, equ, sta, base, busy, ior, iow, bdcr, bdcw, dump, intr, raised, clear, mask, regs, valid, map, rejR, rejW, flags, dc, devspec) \ | |
| { name, model, IOtype_default, equ, sta, 0, base, \ | |
| NULL, NULL, NULL, \ | |
| busy, ior, iow, bdcr, bdcw, dump, intr, raised, clear, \ | |
| 0, 0, IO_##id##_INTR, IO_##id##_DIRMSK, IO_##id##_STMSK, \ | |
| IO_##id##_STCINT | IO_ST_INT, \ | |
| mask, regs, valid, map, rejR, rejW, flags, dc, \ | |
| { 0, 0, 0, 0, 0, 0, 0, 0, }, \ | |
| { 0, 0, 0, 0, 0, 0, 0, 0, }, \ | |
| { 0, 0, 0, 0, 0, 0, 0, 0, }, \ | |
| 0, 0, 0, devspec, 0, FALSE, NULL, 0, 0, 0, 0, FALSE \ | |
| } | |
| typedef struct io_device IO_DEVICE; | |
| #define IODEVICE(dev) ((IO_DEVICE *)dev->ctxt) | |
| #define CHANGED(iod, n) ((iod)->iod_writeR[n] ^ (iod)->iod_prevR[n]) | |
| #define ICHANGED(iod) ((iod)->iod_ienable ^ (iod)->iod_oldienable) | |
| #define DEVRESET(iod) \ | |
| (iod)->iod_ienable = 0; \ | |
| (iod)->iod_oldienable = 0; \ | |
| (iod)->iod_forced = 0 | |
| /* | |
| * Routine type to return interrupt mask for a device. | |
| */ | |
| typedef uint16 devINTR(DEVICE *); | |
| /* | |
| * Generic device flags | |
| */ | |
| #define DBG_V_DTRACE 0 /* Trace device ops */ | |
| #define DBG_V_DSTATE 1 /* Dump device state */ | |
| #define DBG_V_DINTR 2 /* Trace device interrupts */ | |
| #define DBG_V_DERROR 3 /* Trace device errors */ | |
| #define DBG_V_LOC 4 /* Dump instruction location */ | |
| #define DBG_V_FIRSTREJ 5 /* Dump only first Reject */ | |
| #define DBG_SPECIFIC 6 /* Start of device-specific */ | |
| /* flags */ | |
| #define DBG_DTRACE (1 << DBG_V_DTRACE) | |
| #define DBG_DSTATE (1 << DBG_V_DSTATE) | |
| #define DBG_DINTR (1 << DBG_V_DINTR) | |
| #define DBG_DERROR (1 << DBG_V_DERROR) | |
| #define DBG_DLOC (1 << DBG_V_LOC) | |
| #define DBG_DFIRSTREJ (1 << DBG_V_FIRSTREJ) | |
| /* | |
| * Device specific values | |
| */ | |
| /* | |
| * CPU is treated as a device but has no interrupts, director functions or | |
| * status bits. | |
| */ | |
| #define IO_CPU_INTR 0 | |
| #define IO_CPU_DIRMSK 0 | |
| #define IO_CPU_STMSK 0 | |
| #define IO_CPU_STCINT 0 | |
| /* | |
| * 1706-A Buffered Data Channel | |
| */ | |
| #define IO_1706_1_A 0x1000 /* 1706-A #1 */ | |
| #define IO_1706_1_B 0x1800 | |
| #define IO_1706_1_C 0x2000 | |
| #define IO_1706_1_D 0x2800 | |
| #define IO_1706_2_A 0x3800 /* 1706-A #2 */ | |
| #define IO_1706_2_B 0x4000 | |
| #define IO_1706_2_C 0x4800 | |
| #define IO_1706_2_D 0x5000 | |
| #define IO_1706_3_A 0x6000 /* 1706-A #3 */ | |
| #define IO_1706_3_B 0x6800 | |
| #define IO_1706_3_C 0x7000 | |
| #define IO_1706_3_D 0x7800 | |
| #define IO_1706_SET 0x8000 /* Set/clear for ones */ | |
| #define IO_1706_EOP 0x0001 /* Enable interrupt on EOP */ | |
| #define IO_1706_PROT 0x0040 /* Program protect fault */ | |
| #define IO_1706_REPLY 0x0200 /* Device reply */ | |
| #define IO_1706_REJECT 0x0100 /* Device reject */ | |
| #define IO_1706_STMSK (IO_1706_REPLY | IO_1706_REJECT | IO_1706_PROT | \ | |
| IO_ST_EOP | IO_ST_BUSY | IO_ST_READY) | |
| /* | |
| * A 1706-A has no interrupts, director functions or status bits of it's own | |
| * that are accessible through normal I/O requests. | |
| */ | |
| #define IO_DC_INTR 0 | |
| #define IO_DC_DIRMSK 0 | |
| #define IO_DC_STMSK 0 | |
| #define IO_DC_STCINT 0 | |
| #define IO_1706_MAX 3 /* Max # of 1706's allowed */ | |
| #define IO_1706_DEVS 8 /* Max devices per channel */ | |
| #define IDX_FROM_CHAN(c) (c - 1) | |
| /* | |
| * 1711-A/B, 1712-A Teletypewriter | |
| */ | |
| #define IO_1711_A 0x0090 | |
| #define IO_1711_B 0x0091 | |
| #define IO_1711_SREAD 0x0200 /* Select read mode */ | |
| #define IO_1711_SWRITE 0x0100 /* Select write mode */ | |
| #define IO_1711_DIRMSK (IO_1711_SREAD | IO_1711_SWRITE | IO_DIR_ALARM | \ | |
| IO_DIR_EOP | IO_DIR_DATA | IO_DIR_CINT | IO_DIR_CCONT) | |
| #define IO_1711_INTR (IO_DIR_ALARM |IO_DIR_EOP | IO_DIR_DATA) | |
| #define IO_1711_MANUAL 0x0800 /* Manual interrupt */ | |
| #define IO_1711_MON 0x0400 /* Motor on */ | |
| #define IO_1711_RMODE 0x0200 /* Read mode */ | |
| #define IO_1711_STMSK (IO_1711_MANUAL | IO_1711_MON | IO_1711_RMODE | \ | |
| IO_ST_LOST | IO_ST_ALARM | IO_ST_EOP \ | |
| | IO_ST_DATA | IO_ST_INT | IO_ST_BUSY | IO_ST_READY) | |
| #define IO_1711_STCINT (IO_ST_ALARM | IO_ST_EOP | IO_ST_DATA) | |
| /* | |
| * 1721-A/B/C/D, 1722-A/B Paper Tape Reader | |
| */ | |
| #define IO_1721_A 0x00A0 | |
| #define IO_1721_B 0x00A1 | |
| #define IO_1721_DIRMSK (IO_DIR_STOP | IO_DIR_START | IO_DIR_ALARM | \ | |
| IO_DIR_DATA | IO_DIR_CINT | IO_DIR_CCONT) | |
| #define IO_1721_INTR (IO_DIR_ALARM | IO_DIR_DATA) | |
| #define IO_1721_POWERON 0x0400 /* Power on */ | |
| #define IO_1721_MOTIONF 0x0200 /* Paper motion failure */ | |
| #define IO_1721_EXIST 0x0100 /* Existence code */ | |
| #define IO_1721_STMSK (IO_1721_POWERON | IO_1721_MOTIONF | IO_1721_EXIST | \ | |
| IO_ST_PROT | IO_ST_LOST | IO_ST_ALARM | \ | |
| IO_ST_DATA | IO_ST_INT | IO_ST_BUSY | IO_ST_READY) | |
| #define IO_1721_STCINT (IO_ST_ALARM | IO_ST_DATA) | |
| /* | |
| * 1723-A/B, 1724-A/B Paper Tape Punch | |
| */ | |
| #define IO_1723_A 0x00C0 | |
| #define IO_1723_B 0x00C1 | |
| #define IO_1723_DIRMSK (IO_DIR_STOP | IO_DIR_START | IO_DIR_ALARM | \ | |
| IO_DIR_DATA | IO_DIR_CINT | IO_DIR_CCONT) | |
| #define IO_1723_INTR (IO_DIR_ALARM | IO_DIR_DATA) | |
| #define IO_1723_TAPELOW 0x0800 /* Tape supply low */ | |
| #define IO_1723_POWERON 0x0400 /* Power on */ | |
| #define IO_1723_BREAK 0x0200 /* Tape break */ | |
| #define IO_1723_EXIST 0x0100 /* Existence code */ | |
| #define IO_1723_STMSK (IO_1723_TAPELOW | IO_1723_POWERON | IO_1723_BREAK | \ | |
| IO_1723_EXIST | IO_ST_PROT | IO_ST_ALARM | \ | |
| IO_ST_DATA | IO_ST_INT | IO_ST_BUSY | IO_ST_READY) | |
| #define IO_1723_STCINT (IO_ST_ALARM | IO_ST_DATA) | |
| /* | |
| * 1726 Card Reader | |
| */ | |
| #define IO_1726_GATE 0x0200 /* gate card */ | |
| #define IO_1726_NHOL 0x0400 /* Negate hollerith to acsii */ | |
| #define IO_1726_RHOL 0x0800 /* Rel. hollerith to ascii */ | |
| #define IO_1726_RELOAD 0x1000 /* Reload memory */ | |
| #define IO_1726_DIRMSK (IO_1726_RELOAD | IO_1726_RHOL | IO_1726_NHOL | \ | |
| IO_1726_GATE | IO_DIR_ALARM | IO_DIR_EOP | \ | |
| IO_DIR_DATA | IO_DIR_CINT | IO_DIR_CCONT) | |
| #define IO_1726_INTR (IO_DIR_ALARM | IO_DIR_EOP | IO_DIR_DATA) | |
| #define IO_1726_ERROR 0x0100 /* Error */ | |
| #define IO_1726_BINARY 0x0200 /* Binary card */ | |
| #define IO_1726_SEP 0x0400 /* Separator card */ | |
| #define IO_1726_FEED 0x0800 /* Fail to feed */ | |
| #define IO_1726_JAM 0x1000 /* Stacker full or jam */ | |
| #define IO_1726_EMPTY 0x2000 /* Input tray empty */ | |
| #define IO_1726_EOF 0x4000 /* End of file */ | |
| #define IO_1726_PWROFF 0x8000 /* Motor power off */ | |
| #define IO_1726_STMSK (IO_1726_PWROFF | IO_1726_EOF | IO_1726_EMPTY | \ | |
| IO_1726_JAM | IO_1726_FEED | IO_1726_SEP | \ | |
| IO_1726_BINARY | IO_1726_ERROR | IO_ST_PROT | \ | |
| IO_ST_ALARM | IO_ST_EOP | IO_ST_DATA | \ | |
| IO_ST_INT | IO_ST_BUSY | IO_ST_READY) | |
| #define IO_1726_STCINT (IO_ST_ALARM | IO_ST_EOP | IO_ST_DATA) | |
| /* | |
| * 1729-A/B Card Reader | |
| */ | |
| #define IO_1729_A 0x00E0 | |
| #define IO_1729_B 0x00E1 | |
| #define IO_1729_IEOR 0x0008 /* Interrupt on End of Record */ | |
| #define IO_1729_DIRMSK (IO_DIR_STOP | IO_DIR_START | IO_DIR_ALARM | \ | |
| IO_1729_IEOR | IO_DIR_DATA | IO_DIR_CINT | \ | |
| IO_DIR_CCONT) | |
| #define IO_1729_INTR (IO_DIR_ALARM | IO_1729_IEOR | IO_DIR_DATA) | |
| #define IO_1729_EMPTY 0x0200 /* Read station empty */ | |
| #define IO_1729_EXIST 0x0100 /* Existence code */ | |
| #define IO_1729_EOR 0x0010 /* End of Record */ | |
| #define IO_1729_STMSK (IO_1729_EMPTY | IO_1729_EXIST | IO_ST_PROT | \ | |
| IO_ST_LOST | IO_ST_ALARM | IO_1729_EOR | \ | |
| IO_ST_DATA | IO_ST_INT | IO_ST_BUSY | \ | |
| IO_ST_READY) | |
| #define IO_1729_STCINT (IO_ST_ALARM | IO_1729_EOR | IO_ST_DATA) | |
| /* | |
| * 1732-3 Magnetic Tape Controller | |
| */ | |
| #define IO_1732_WRITE 0x0080 /* Write motion */ | |
| #define IO_1732_READ 0x0100 /* Read motion */ | |
| #define IO_1732_BACKSP 0x0180 /* Backspace */ | |
| #define IO_1732_WFM 0x0280 /* Write file mark/tape mark */ | |
| #define IO_1732_SFWD 0x0300 /* Search FM/TM forward */ | |
| #define IO_1732_SBACK 0x0380 /* Search FM/TM backward */ | |
| #define IO_1732_REWL 0x0400 /* Rewind load */ | |
| #define IO_1732_MOTION 0x0780 /* Motion field mask */ | |
| #define IO_1732_LRT 0x1000 /* Select low read threshold */ | |
| #define IO_1732_DESEL 0x0800 /* Deselect tape unit */ | |
| #define IO_1732_SEL 0x0400 /* Select tape unit */ | |
| #define IO_1732_UNIT 0x0180 /* Unit mask */ | |
| #define IO_1732_ASSEM 0x0040 /* Assembly/Disassembly */ | |
| #define IO_1732_1600 0x0020 /* Select 1600 BPI */ | |
| #define IO_1732_556 0x0010 /* Select 556 BPI */ | |
| #define IO_1732_800 0x0008 /* Select 800 BPI */ | |
| #define IO_1732_BINARY 0x0004 /* Binary mode */ | |
| #define IO_1732_BCD 0x0002 /* BCD mode */ | |
| #define IO_1732_PARITY 0x0006 /* Parity mask */ | |
| #define IO_1732_CHAR 0x0001 /* Character mode */ | |
| /* 1732-A/B changes */ | |
| #define IO_1732A_REWU 0x0600 /* Rewind and unload */ | |
| #define IO_1732A_UNIT 0x0380 /* Unit mask */ | |
| #define IO_1732A_200 0x0020 /* Select 200 BPI */ | |
| #define IO_1732_DIRMSK (IO_1732_MOTION | IO_DIR_ALARM | IO_DIR_EOP | \ | |
| IO_DIR_DATA | IO_DIR_CINT | IO_DIR_CCONT) | |
| #define IO_1732_INTR (IO_DIR_ALARM | IO_DIR_EOP | IO_DIR_DATA) | |
| #define IO_1732_PROT 0x8000 /* Protect fault */ | |
| #define IO_1732_SPE 0x4000 /* Storage parity error */ | |
| #define IO_1732_FILL 0x2000 /* Odd byte record in */ | |
| /* assembly mode */ | |
| #define IO_1732_ACTIVE 0x1000 /* Controller active */ | |
| #define IO_1732_FMARK 0x0800 /* At file mark */ | |
| #define IO_1732_BOT 0x0400 /* At BOT */ | |
| #define IO_1732_EOT 0x0200 /* At EOT */ | |
| #define IO_1732_STMSK (IO_1732_PROT | IO_1732_SPE | IO_1732_FILL | \ | |
| IO_1732_ACTIVE | IO_1732_FMARK | IO_1732_BOT | \ | |
| IO_1732_EOT | IO_ST_PARITY | IO_ST_PROT | \ | |
| IO_ST_LOST | IO_ST_ALARM | IO_ST_EOP | \ | |
| IO_ST_DATA | IO_ST_INT | IO_ST_BUSY | \ | |
| IO_ST_READY) | |
| #define IO_1732_STCINT (IO_DIR_ALARM | IO_DIR_EOP | IO_DIR_DATA) | |
| #define IO_ST2_LRT 0x0200 /* Low read threshold */ | |
| #define IO_ST2_IDABORT 0x0100 /* ID abort */ | |
| #define IO_ST2_PETRANS 0x0080 /* PE capable transport */ | |
| #define IO_ST2_PELOST 0x0040 /* PE - lost data */ | |
| #define IO_ST2_PEWARN 0x0020 /* PE - error warning */ | |
| #define IO_ST2_WENABLE 0x0010 /* Write enable */ | |
| #define IO_ST2_7TRACK 0x0008 /* Seven track transport */ | |
| #define IO_ST2_1600 0x0004 /* 1600 BPI */ | |
| #define IO_ST2_800 0x0002 /* 800 BPI */ | |
| #define IO_ST2_556 0x0001 /* 556 BPI */ | |
| #define IO_1732_ST2MSK (IO_ST2_LRT | IO_ST2_IDABORT | IO_ST2_PETRANS | \ | |
| IO_ST2_PELOST | IO_ST2_PEWARN | IO_ST2_WENABLE | \ | |
| IO_ST2_7TRACK | IO_ST2_1600 | IO_ST2_800 | \ | |
| IO_ST2_556) | |
| #define IO_1732A_ST2MSK (IO_ST2_WENABLE | IO_ST2_7TRACK | IO_ST2_800 | \ | |
| IO_ST2_556) | |
| /* | |
| * 1733-2 Cartridge Disk Drive Controller | |
| */ | |
| #define IO_1733_USC 0x0600 /* Unit select code */ | |
| #define IO_1733_USEL 0x0100 /* Unit select */ | |
| #define IO_1733_UDSEL 0x0080 /* Unit de-select */ | |
| #define IO_1733_RBINT 0x0004 /* Ready and not busy int */ | |
| #define IO_1733_DIRMSK (IO_1733_USC | IO_1733_USEL | IO_1733_UDSEL | \ | |
| IO_DIR_ALARM | IO_DIR_EOP | IO_1733_RBINT | \ | |
| IO_DIR_CINT) | |
| #define IO_1733_INTR (IO_DIR_ALARM | IO_DIR_EOP | IO_1733_RBINT) | |
| #define IO_1733_DSEEK 0x8000 /* Drive seek error */ | |
| #define IO_1733_SPROT 0x4000 /* Storage protect fault */ | |
| #define IO_1733_SPAR 0x2000 /* Storage parity error */ | |
| #define IO_1733_SINGLE 0x1000 /* Single density */ | |
| #define IO_1733_CSEEK 0x0800 /* Controller seek error */ | |
| #define IO_1733_ADDRERR 0x0400 /* Address error */ | |
| #define IO_1733_LOST 0x0200 /* Lost data */ | |
| #define IO_1733_CWERR 0x0100 /* Checkword error */ | |
| #define IO_1733_NOCOMP 0x0040 /* No compare */ | |
| #define IO_1733_ONCYL 0x0008 /* On cylinder */ | |
| #define IO_1733_STMSK (IO_1733_DSEEK | IO_1733_SPROT | IO_1733_SPAR | \ | |
| IO_1733_SINGLE | IO_1733_CSEEK | IO_1733_ADDRERR | \ | |
| IO_1733_LOST | IO_1733_CWERR | IO_ST_PROT | \ | |
| IO_1733_NOCOMP | IO_ST_ALARM | IO_ST_EOP | \ | |
| IO_1733_ONCYL | IO_ST_INT | IO_ST_BUSY | \ | |
| IO_ST_READY) | |
| #define IO_1733_STCINT (IO_ST_ALARM | IO_ST_EOP) | |
| /* | |
| * 1738-A/B Disk Pack Controller | |
| */ | |
| #define IO_1738_USC 0x0200 /* Unit select code */ | |
| #define IO_1738_USEL 0x0100 /* Unit select */ | |
| #define IO_1738_REL 0x0080 /* Release */ | |
| #define IO_1738_RBINT 0x0004 /* Ready and not busy int */ | |
| #define IO_1738_DIRMSK (IO_1738_USC | IO_1738_USEL | IO_1738_REL | \ | |
| IO_DIR_ALARM | IO_DIR_EOP | IO_1738_RBINT | \ | |
| IO_DIR_CINT) | |
| #define IO_1738_INTR (IO_DIR_ALARM | IO_DIR_EOP | IO_1738_RBINT) | |
| #define IO_1738_SPROT 0x4000 /* Storage protect fault */ | |
| #define IO_1738_SPAR 0x2000 /* Storage parity error */ | |
| #define IO_1738_DEFECT 0x1000 /* Defective track */ | |
| #define IO_1738_ADDRERR 0x0800 /* Address error */ | |
| #define IO_1738_SKERR 0x0400 /* Seek error */ | |
| #define IO_1738_LOST 0x0200 /* Lost data */ | |
| #define IO_1738_CWERR 0x0100 /* Checkword error */ | |
| #define IO_1738_NOCOMP 0x0040 /* No compare */ | |
| #define IO_1738_ONCYL 0x0008 /* On cylinder */ | |
| #define IO_1738_STMSK (IO_1738_SPROT | IO_1738_SPAR | IO_1738_DEFECT | \ | |
| IO_1738_ADDRERR | IO_1738_SKERR | IO_1738_LOST | \ | |
| IO_1738_CWERR | IO_ST_PROT | IO_1738_NOCOMP | \ | |
| IO_ST_ALARM | IO_ST_EOP | IO_1738_ONCYL | \ | |
| IO_ST_INT | IO_ST_BUSY | IO_ST_READY) | |
| #define IO_1738_STCINT (IO_ST_ALARM | IO_ST_EOP) | |
| /* | |
| * 1740 - Line Printer Controller | |
| */ | |
| #define IO_1740_CPRINT 0x0001 /* Clear printer */ | |
| #define IO_1740_DIRMSK (IO_DIR_ALARM | IO_DIR_EOP | IO_DIR_DATA | \ | |
| IO_DIR_CINT | IO_1740_CPRINT) | |
| #define IO_1740_INTR (IO_DIR_ALARM | IO_DIR_EOP | IO_DIR_DATA) | |
| #define IO_1740_L12 0x4000 /* Level 12 */ | |
| #define IO_1740_L7 0x0200 /* Level 7 */ | |
| #define IO_1740_L6 0x0100 /* Level 6 */ | |
| #define IO_1740_L5 0x0080 /* Level 5 */ | |
| #define IO_1740_L4 0x0040 /* Level 4 */ | |
| #define IO_1740_L3 0x0020 /* Level 3 */ | |
| #define IO_1740_L2 0x0010 /* Level 2 */ | |
| #define IO_1740_L1 0x0008 /* Level 1 */ | |
| #define IO_1740_DSP 0x0004 /* Double space */ | |
| #define IO_1740_SSP 0x0002 /* Single space */ | |
| #define IO_1740_PRINT 0x0001 /* Print */ | |
| #define IO_1740_DIR2MSK (IO_1740_L12 | IO_1740_L7 | IO_1740_L6 | \ | |
| IO_1740_L5 | IO_1740_L4 | IO_1740_L3 | \ | |
| IO_1740_L2 | IO_1740_L1 | IO_1740_DSP | \ | |
| IO_1740_SSP | IO_1740_PRINT) | |
| #define IO_1740_LEVELS (IO_1740_L1 | IO_1740_L2 | IO_1740_L3 | \ | |
| IO_1740_L4 | IO_1740_L5 | IO_1740_L6 | \ | |
| IO_1740_L7 | IO_1740_L12) | |
| #define IO_1740_MOTION (IO_1740_SSP | IO_1740_DSP | IO_1740_LEVELS) | |
| #define IO_1740_STMSK (IO_ST_PROT | IO_ST_ALARM | IO_ST_EOP | \ | |
| IO_ST_DATA | IO_ST_INT | IO_ST_BUSY | \ | |
| IO_ST_READY) | |
| #define IO_1740_STCINT (IO_ST_ALARM | IO_ST_EOP | IO_ST_DATA) | |
| /* | |
| * 1742-30/-120 Line Printer | |
| */ | |
| #define IO_1742_PRINT 0x0020 /* Print */ | |
| #define IO_1742_DIRMSK (IO_1742_PRINT | IO_DIR_ALARM | IO_DIR_EOP | \ | |
| IO_DIR_DATA | IO_DIR_CINT | IO_DIR_CCONT) | |
| #define IO_1742_INTR (IO_DIR_ALARM | IO_DIR_EOP | IO_DIR_DATA) | |
| #define IO_1742_LIMAGE 0x0100 /* Load image (-120 only) */ | |
| #define IO_1742_ERROR 0x0040 /* Device error */ | |
| #define IO_1742_STMSK (IO_1742_LIMAGE | IO_ST_PROT | IO_1742_ERROR | \ | |
| IO_ST_ALARM | IO_ST_EOP | IO_ST_DATA | \ | |
| IO_ST_INT | IO_ST_BUSY | IO_ST_READY) | |
| #define IO_1742_STCINT (IO_ST_ALARM | IO_ST_EOP | IO_ST_DATA) | |
| /* | |
| * 10336-1 Real-Time Clock | |
| */ | |
| #define IO_10336_ACK 0x0002 /* Acknowledge interrupt */ | |
| #define IO_10336_STOP 0x0040 /* Stop clock */ | |
| #define IO_10336_START 0x0080 /* Start clock */ | |
| #define IO_10336_DIS 0x4000 /* Disable interrupt */ | |
| #define IO_10336_ENA 0x8000 /* Enable interrupt */ | |
| #define IO_10336_DIRMSK (IO_10336_ENA | IO_10336_DIS | IO_10336_START | \ | |
| IO_10336_STOP | IO_10336_ACK | IO_DIR_CCONT) | |
| #define IO_10336_INTR 0 | |
| #define IO_10336_STMSK 0 | |
| #define IO_10336_STCINT 0 | |
| /* | |
| * Timing parameters | |
| */ | |
| #define TT_OUT_WAIT 200 /* TTY output wait time */ | |
| #define TT_IN_XFER 60 /* TTY input transfer delay */ | |
| #define TT_IN_MOTION 500 /* TTY paper motion delay */ | |
| #define PTP_OUT_WAIT 500 /* Punch output wait time */ | |
| #define PTR_IN_WAIT 450 /* Reader input wait time */ | |
| #define LP_OUT_WAIT 15 /* Line printer output wait time */ | |
| #define LP_PRINT_WAIT 3000 /* Print line wait time */ | |
| #define LP_CC_WAIT 300 /* Control char wait time */ | |
| #define MT_MOTION_WAIT 150 /* Magtape motion delay */ | |
| #define MT_RDATA_DELAY 46 /* Read data avail. period */ | |
| #define MT_WDATA_DELAY 46 /* Write data ready period */ | |
| #define MT_200_WAIT 134 /* I/O latency (200 bpi) */ | |
| #define MT_556_WAIT 48 /* I/O latency (556 bpi) */ | |
| #define MT_800_WAIT 33 /* I/O latency (800 bpi) */ | |
| #define MT_1600_WAIT 16 /* I/O latency (1600 bpi) */ | |
| #define MT_MIN_WAIT 10 /* Minimum I/O latency */ | |
| #define MT_REC_WAIT 100 /* Magtape record latency */ | |
| #define MT_TM_WAIT 200 /* Magtape write TM latency */ | |
| #define MT_EOP_WAIT 100 /* Magtape EOP latency */ | |
| #define DP_XFER_WAIT 300 /* Control info xfer time */ | |
| #define DP_SEEK_WAIT 2000 /* Seek wait time */ | |
| #define DP_IO_WAIT 1000 /* Sector I/O wait time */ | |
| #define CD_SEEK_WAIT 1100 /* Seek wait time */ | |
| #define CD_IO_WAIT 800 /* Sector I/O wait time */ | |
| #define CD_RTZS_WAIT 200 /* Return to zero seek wait */ | |
| #define DC_START_WAIT 4 /* Startup delay */ | |
| #define DC_IO_WAIT 4 /* I/O transfer delay */ | |
| #define DC_EOP_WAIT 5 /* EOP delay */ | |
| #endif |