/* | |
* Dos/PC Emulator | |
* Copyright (C) 1991 Jim Hudgens | |
* | |
* | |
* The file is part of GDE. | |
* | |
* GDE is free software; you can redistribute it and/or modify | |
* it under the terms of the GNU General Public License as published by | |
* the Free Software Foundation; either version 1, or (at your option) | |
* any later version. | |
* | |
* GDE is distributed in the hope that it will be useful, | |
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
* GNU General Public License for more details. | |
* | |
* You should have received a copy of the GNU General Public License | |
* along with GDE; see the file COPYING. If not, write to | |
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
* | |
*/ | |
#include "altairz80_defs.h" | |
#include "i86.h" | |
extern uint32 GetBYTEExtended(register uint32 Addr); | |
extern void PutBYTEExtended(register uint32 Addr, const register uint32 Value); | |
extern int32 AX_S; /* AX register (8086) */ | |
extern int32 BX_S; /* BX register (8086) */ | |
extern int32 CX_S; /* CX register (8086) */ | |
extern int32 DX_S; /* DX register (8086) */ | |
extern int32 CS_S; /* CS register (8086) */ | |
extern int32 DS_S; /* DS register (8086) */ | |
extern int32 ES_S; /* ES register (8086) */ | |
extern int32 SS_S; /* SS register (8086) */ | |
extern int32 DI_S; /* DI register (8086) */ | |
extern int32 SI_S; /* SI register (8086) */ | |
extern int32 BP_S; /* BP register (8086) */ | |
extern int32 SPX_S; /* SP register (8086) */ | |
extern int32 IP_S; /* IP register (8086) */ | |
extern int32 FLAGS_S; /* flags register (8086) */ | |
extern int32 PCX_S; /* PC register (8086), 20 bit */ | |
extern uint32 PCX; /* external view of PC */ | |
extern UNIT cpu_unit; | |
void i86_intr_raise(PC_ENV *m,uint8 intrnum); | |
void cpu8086reset(void); | |
t_stat sim_instr_8086(void); | |
void cpu8086_intr(uint8 intrnum); | |
/* $Log: $ | |
* Revision 0.05 1992/04/12 23:16:42 hudgens | |
* Many changes. Added support for the QUICK_FETCH option, | |
* so that memory accesses are faster. Now compiles with gcc -Wall | |
* and gcc -traditional and Sun cc. | |
* | |
* Revision 0.04 1991/07/30 01:59:56 hudgens | |
* added copyright. | |
* | |
* Revision 0.03 1991/06/03 01:02:09 hudgens | |
* fixed minor problems due to unsigned to signed short integer | |
* promotions. | |
* | |
* Revision 0.02 1991/03/31 01:29:39 hudgens | |
* Fixed segment handling (overrides, default segment accessed) in | |
* routines decode_rmXX_address and the {fetch,store}_data_{byte,word}. | |
* | |
* Revision 0.01 1991/03/30 21:59:49 hudgens | |
* Initial checkin. | |
* | |
* | |
*/ | |
/* this file includes subroutines which do: | |
stuff involving decoding instruction formats. | |
stuff involving accessess of immediate data via IP. | |
etc. | |
*/ | |
static void i86_intr_handle(PC_ENV *m) | |
{ uint16 tmp; | |
uint8 intno; | |
if (intr & INTR_SYNCH) /* raised by something */ | |
{ | |
intno = m->intno; | |
{ | |
tmp = m->R_FLG; | |
push_word(m, tmp); | |
CLEAR_FLAG(m, F_IF); | |
CLEAR_FLAG(m, F_TF); | |
/* [JCE] If we're interrupting between a segment override (or REP override) | |
* and the following instruction, decrease IP to get back to the prefix */ | |
if (m->sysmode & (SYSMODE_SEGMASK | SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) | |
{ | |
--m->R_IP; | |
} | |
/* [JCE] CS and IP were the wrong way round... */ | |
push_word(m, m->R_CS); | |
push_word(m, m->R_IP); | |
tmp = mem_access_word(m, intno * 4); | |
m->R_IP = tmp; | |
tmp = mem_access_word(m, intno * 4 + 2); | |
m->R_CS = tmp; | |
} | |
intr &= ~INTR_SYNCH; /* [JCE] Dealt with, reset flag */ | |
} | |
/* The interrupt code can't pick up the segment override status. */ | |
DECODE_CLEAR_SEGOVR(m); | |
} | |
void i86_intr_raise(PC_ENV *m,uint8 intrnum) | |
{ | |
m->intno = intrnum; | |
intr |= INTR_SYNCH; | |
} | |
static PC_ENV cpu8086; | |
void cpu8086_intr(uint8 intrnum) | |
{ | |
i86_intr_raise(&cpu8086, intrnum); | |
} | |
static void setViewRegisters(void) { | |
FLAGS_S = cpu8086.R_FLG; | |
AX_S = cpu8086.R_AX; | |
BX_S = cpu8086.R_BX; | |
CX_S = cpu8086.R_CX; | |
DX_S = cpu8086.R_DX; | |
SPX_S = cpu8086.R_SP; | |
BP_S = cpu8086.R_BP; | |
SI_S = cpu8086.R_SI; | |
DI_S = cpu8086.R_DI; | |
ES_S = cpu8086.R_ES; | |
CS_S = cpu8086.R_CS; | |
SS_S = cpu8086.R_SS; | |
DS_S = cpu8086.R_DS; | |
IP_S = cpu8086.R_IP; | |
} | |
static void setCPURegisters(void) { | |
cpu8086.R_FLG = FLAGS_S; | |
cpu8086.R_AX = AX_S; | |
cpu8086.R_BX = BX_S; | |
cpu8086.R_CX = CX_S; | |
cpu8086.R_DX = DX_S; | |
cpu8086.R_SP = SPX_S; | |
cpu8086.R_BP = BP_S; | |
cpu8086.R_SI = SI_S; | |
cpu8086.R_DI = DI_S; | |
cpu8086.R_ES = ES_S; | |
cpu8086.R_CS = CS_S; | |
cpu8086.R_SS = SS_S; | |
cpu8086.R_DS = DS_S; | |
cpu8086.R_IP = IP_S; | |
} | |
void cpu8086reset(void) { | |
cpu8086.R_AX = 0x1961; | |
if ((cpu8086.R_AH != 0x19) || (cpu8086.R_AL != 0x61)) { | |
sim_printf("Fatal endian error - make sure to compile with '#define LOWFIRST %i'\n", 1 - LOWFIRST); | |
exit(1); | |
} | |
/* 16 bit registers */ | |
cpu8086.R_AX = 0; | |
cpu8086.R_BX = 0; | |
cpu8086.R_CX = 0; | |
cpu8086.R_DX = 0; | |
/* special registers */ | |
cpu8086.R_SP = 0; | |
cpu8086.R_BP = 0; | |
cpu8086.R_SI = 0; | |
cpu8086.R_DI = 0; | |
cpu8086.R_IP = 0; | |
cpu8086.R_FLG = F_ALWAYS_ON; | |
/* segment registers */ | |
cpu8086.R_CS = 0; | |
cpu8086.R_DS = 0; | |
cpu8086.R_SS = 0; | |
cpu8086.R_ES = 0; | |
setViewRegisters(); | |
} | |
static uint32 getFullPC(void) { | |
return cpu8086.R_IP + (cpu8086.R_CS << 4); | |
} | |
extern int32 switch_cpu_now; /* hharte */ | |
t_stat sim_instr_8086(void) { | |
t_stat reason = SCPE_OK; | |
uint8 op1; | |
int32 newIP; | |
setCPURegisters(); | |
intr = 0; | |
newIP = PCX_S - 16 * CS_S; | |
switch_cpu_now = TRUE; /* hharte */ | |
if ((0 <= newIP) && (newIP <= 0xffff)) | |
cpu8086.R_IP = newIP; | |
else { | |
if (CS_S != ((PCX_S & 0xf0000) >> 4)) { | |
cpu8086.R_CS = (PCX_S & 0xf0000) >> 4; | |
if (cpu_unit.flags & UNIT_CPU_VERBOSE) | |
sim_printf("CPU: " ADDRESS_FORMAT " Segment register CS set to %04x" NLP, PCX, cpu8086.R_CS); | |
} | |
cpu8086.R_IP = PCX_S & 0xffff; | |
} | |
while (switch_cpu_now == TRUE) { /* loop until halted */ | |
if (sim_interval <= 0) { /* check clock queue */ | |
#if !UNIX_PLATFORM | |
/* poll on platforms without reliable signalling */ | |
if ((sim_poll_kbd() == SCPE_OK) && stop_cpu) { | |
reason = SCPE_STOP; | |
break; | |
} | |
#endif | |
if ( (reason = sim_process_event()) ) | |
break; | |
} | |
if (sim_brk_summ && sim_brk_test(getFullPC(), SWMASK('E'))) { /* breakpoint? */ | |
reason = STOP_IBKPT; /* stop simulation */ | |
break; | |
} | |
PCX = getFullPC(); | |
op1 = GetBYTEExtended((((uint32)cpu8086.R_CS<<4) + cpu8086.R_IP) & 0xFFFFF); | |
if (sim_brk_summ && sim_brk_test(op1, (1u << SIM_BKPT_V_SPC) | SWMASK('I'))) { /* instruction breakpoint? */ | |
reason = STOP_IBKPT; /* stop simulation */ | |
break; | |
} | |
sim_interval--; | |
cpu8086.R_IP++; | |
(*(i86_optab[op1]))(&cpu8086); | |
if (intr & INTR_HALTED) { | |
reason = STOP_HALT; | |
intr &= ~INTR_HALTED; | |
break; | |
} | |
if (intr & INTR_ILLEGAL_OPCODE) { | |
intr &= ~INTR_ILLEGAL_OPCODE; | |
if (cpu_unit.flags & UNIT_CPU_OPSTOP) { | |
reason = STOP_OPCODE; | |
break; | |
} | |
} | |
if (((intr & INTR_SYNCH) && (cpu8086.intno == 0 || cpu8086.intno == 2)) || | |
(ACCESS_FLAG(&cpu8086, F_IF))) { | |
/* [JCE] Reversed the sense of this ACCESS_FLAG; it's set for interrupts | |
enabled, not interrupts blocked i.e. either not blockable (intr 0 or 2) | |
or the IF flag not set so interrupts not blocked */ | |
/* hharte: if a segment override exists, then treat that as "atomic" and do not handle | |
* an interrupt until the override is cleared. | |
* Not sure if this is the way an 8086 really works, need to find out for sure. | |
* Also, what about the REPE prefix? | |
*/ | |
if ((cpu8086.sysmode & SYSMODE_SEGMASK) == 0) { | |
i86_intr_handle(&cpu8086); | |
} | |
} | |
} | |
/* It we stopped processing instructions because of a switch to the other | |
* CPU, then fixup the reason code. | |
*/ | |
if (switch_cpu_now == FALSE) { | |
reason = SCPE_OK; | |
PCX += 2; | |
PCX_S = PCX; | |
} else { | |
PCX_S = (reason == STOP_HALT) | (reason == STOP_OPCODE) ? PCX : getFullPC(); | |
} | |
setViewRegisters(); | |
return reason; | |
} | |
void halt_sys(PC_ENV *m) | |
{ | |
intr |= INTR_HALTED; | |
} | |
/* once the instruction is fetched, an optional byte follows which | |
has 3 fields encoded in it. This routine fetches the byte | |
and breaks into the three fields. | |
This has been changed, in an attempt to reduce the amount of | |
executed code for this frequently executed subroutine. If this | |
works, then it may pay to somehow inline it. | |
*/ | |
#ifdef NOTDEF | |
/* this code generated the following table */ | |
main() | |
{ int i; | |
sim_printf("\n\nstruct modrm{ uint8 mod,rh,rl;} modrmtab[] = {\n"); | |
for (i=0; i<256; i++) | |
{ | |
sim_printf("{%d,%d,%d}, ",((i&0xc0)>>6),((i&0x38)>>3),(i&0x07)); | |
if (i%4==3) | |
sim_printf("/* %d to %d */\n",i&0xfc,i); | |
} | |
sim_printf("};\n\n"); | |
} | |
#endif | |
struct modrm { uint16 mod, rh, rl; }; | |
static struct modrm modrmtab[] = { | |
{0,0,0}, {0,0,1}, {0,0,2}, {0,0,3}, /* 0 to 3 */ | |
{0,0,4}, {0,0,5}, {0,0,6}, {0,0,7}, /* 4 to 7 */ | |
{0,1,0}, {0,1,1}, {0,1,2}, {0,1,3}, /* 8 to 11 */ | |
{0,1,4}, {0,1,5}, {0,1,6}, {0,1,7}, /* 12 to 15 */ | |
{0,2,0}, {0,2,1}, {0,2,2}, {0,2,3}, /* 16 to 19 */ | |
{0,2,4}, {0,2,5}, {0,2,6}, {0,2,7}, /* 20 to 23 */ | |
{0,3,0}, {0,3,1}, {0,3,2}, {0,3,3}, /* 24 to 27 */ | |
{0,3,4}, {0,3,5}, {0,3,6}, {0,3,7}, /* 28 to 31 */ | |
{0,4,0}, {0,4,1}, {0,4,2}, {0,4,3}, /* 32 to 35 */ | |
{0,4,4}, {0,4,5}, {0,4,6}, {0,4,7}, /* 36 to 39 */ | |
{0,5,0}, {0,5,1}, {0,5,2}, {0,5,3}, /* 40 to 43 */ | |
{0,5,4}, {0,5,5}, {0,5,6}, {0,5,7}, /* 44 to 47 */ | |
{0,6,0}, {0,6,1}, {0,6,2}, {0,6,3}, /* 48 to 51 */ | |
{0,6,4}, {0,6,5}, {0,6,6}, {0,6,7}, /* 52 to 55 */ | |
{0,7,0}, {0,7,1}, {0,7,2}, {0,7,3}, /* 56 to 59 */ | |
{0,7,4}, {0,7,5}, {0,7,6}, {0,7,7}, /* 60 to 63 */ | |
{1,0,0}, {1,0,1}, {1,0,2}, {1,0,3}, /* 64 to 67 */ | |
{1,0,4}, {1,0,5}, {1,0,6}, {1,0,7}, /* 68 to 71 */ | |
{1,1,0}, {1,1,1}, {1,1,2}, {1,1,3}, /* 72 to 75 */ | |
{1,1,4}, {1,1,5}, {1,1,6}, {1,1,7}, /* 76 to 79 */ | |
{1,2,0}, {1,2,1}, {1,2,2}, {1,2,3}, /* 80 to 83 */ | |
{1,2,4}, {1,2,5}, {1,2,6}, {1,2,7}, /* 84 to 87 */ | |
{1,3,0}, {1,3,1}, {1,3,2}, {1,3,3}, /* 88 to 91 */ | |
{1,3,4}, {1,3,5}, {1,3,6}, {1,3,7}, /* 92 to 95 */ | |
{1,4,0}, {1,4,1}, {1,4,2}, {1,4,3}, /* 96 to 99 */ | |
{1,4,4}, {1,4,5}, {1,4,6}, {1,4,7}, /* 100 to 103 */ | |
{1,5,0}, {1,5,1}, {1,5,2}, {1,5,3}, /* 104 to 107 */ | |
{1,5,4}, {1,5,5}, {1,5,6}, {1,5,7}, /* 108 to 111 */ | |
{1,6,0}, {1,6,1}, {1,6,2}, {1,6,3}, /* 112 to 115 */ | |
{1,6,4}, {1,6,5}, {1,6,6}, {1,6,7}, /* 116 to 119 */ | |
{1,7,0}, {1,7,1}, {1,7,2}, {1,7,3}, /* 120 to 123 */ | |
{1,7,4}, {1,7,5}, {1,7,6}, {1,7,7}, /* 124 to 127 */ | |
{2,0,0}, {2,0,1}, {2,0,2}, {2,0,3}, /* 128 to 131 */ | |
{2,0,4}, {2,0,5}, {2,0,6}, {2,0,7}, /* 132 to 135 */ | |
{2,1,0}, {2,1,1}, {2,1,2}, {2,1,3}, /* 136 to 139 */ | |
{2,1,4}, {2,1,5}, {2,1,6}, {2,1,7}, /* 140 to 143 */ | |
{2,2,0}, {2,2,1}, {2,2,2}, {2,2,3}, /* 144 to 147 */ | |
{2,2,4}, {2,2,5}, {2,2,6}, {2,2,7}, /* 148 to 151 */ | |
{2,3,0}, {2,3,1}, {2,3,2}, {2,3,3}, /* 152 to 155 */ | |
{2,3,4}, {2,3,5}, {2,3,6}, {2,3,7}, /* 156 to 159 */ | |
{2,4,0}, {2,4,1}, {2,4,2}, {2,4,3}, /* 160 to 163 */ | |
{2,4,4}, {2,4,5}, {2,4,6}, {2,4,7}, /* 164 to 167 */ | |
{2,5,0}, {2,5,1}, {2,5,2}, {2,5,3}, /* 168 to 171 */ | |
{2,5,4}, {2,5,5}, {2,5,6}, {2,5,7}, /* 172 to 175 */ | |
{2,6,0}, {2,6,1}, {2,6,2}, {2,6,3}, /* 176 to 179 */ | |
{2,6,4}, {2,6,5}, {2,6,6}, {2,6,7}, /* 180 to 183 */ | |
{2,7,0}, {2,7,1}, {2,7,2}, {2,7,3}, /* 184 to 187 */ | |
{2,7,4}, {2,7,5}, {2,7,6}, {2,7,7}, /* 188 to 191 */ | |
{3,0,0}, {3,0,1}, {3,0,2}, {3,0,3}, /* 192 to 195 */ | |
{3,0,4}, {3,0,5}, {3,0,6}, {3,0,7}, /* 196 to 199 */ | |
{3,1,0}, {3,1,1}, {3,1,2}, {3,1,3}, /* 200 to 203 */ | |
{3,1,4}, {3,1,5}, {3,1,6}, {3,1,7}, /* 204 to 207 */ | |
{3,2,0}, {3,2,1}, {3,2,2}, {3,2,3}, /* 208 to 211 */ | |
{3,2,4}, {3,2,5}, {3,2,6}, {3,2,7}, /* 212 to 215 */ | |
{3,3,0}, {3,3,1}, {3,3,2}, {3,3,3}, /* 216 to 219 */ | |
{3,3,4}, {3,3,5}, {3,3,6}, {3,3,7}, /* 220 to 223 */ | |
{3,4,0}, {3,4,1}, {3,4,2}, {3,4,3}, /* 224 to 227 */ | |
{3,4,4}, {3,4,5}, {3,4,6}, {3,4,7}, /* 228 to 231 */ | |
{3,5,0}, {3,5,1}, {3,5,2}, {3,5,3}, /* 232 to 235 */ | |
{3,5,4}, {3,5,5}, {3,5,6}, {3,5,7}, /* 236 to 239 */ | |
{3,6,0}, {3,6,1}, {3,6,2}, {3,6,3}, /* 240 to 243 */ | |
{3,6,4}, {3,6,5}, {3,6,6}, {3,6,7}, /* 244 to 247 */ | |
{3,7,0}, {3,7,1}, {3,7,2}, {3,7,3}, /* 248 to 251 */ | |
{3,7,4}, {3,7,5}, {3,7,6}, {3,7,7}, /* 252 to 255 */ | |
}; | |
void fetch_decode_modrm(PC_ENV *m, uint16 *mod, uint16 *regh, uint16 *regl) | |
{ uint8 fetched; | |
register struct modrm *p; | |
/* do the fetch in real mode. Shift the CS segment register | |
over by 4 bits, and add in the IP register. Index into | |
the system memory. | |
*/ | |
/* [JCE] Wrap at 1Mb (the A20 gate) */ | |
fetched = GetBYTEExtended(((m->R_CS << 4) + (m->R_IP++)) & 0xFFFFF); | |
#ifdef NOTDEF | |
*mod = ((fetched&0xc0)>>6); | |
*regh= ((fetched&0x38)>>3); | |
*regl= (fetched&0x7); | |
#else | |
p = modrmtab + fetched; | |
*mod = p->mod; | |
*regh= p->rh; | |
*regl= p->rl; | |
#endif | |
} | |
/* | |
return a pointer to the register given by the R/RM field of | |
the modrm byte, for byte operands. | |
Also enables the decoding of instructions. | |
*/ | |
uint8 *decode_rm_byte_register(PC_ENV *m, int reg) | |
{ | |
switch(reg) | |
{ | |
case 0: | |
return &m->R_AL; | |
break; | |
case 1: | |
return &m->R_CL; | |
break; | |
case 2: | |
return &m->R_DL; | |
break; | |
case 3: | |
return &m->R_BL; | |
break; | |
case 4: | |
return &m->R_AH; | |
break; | |
case 5: | |
return &m->R_CH; | |
break; | |
case 6: | |
return &m->R_DH; | |
break; | |
case 7: | |
return &m->R_BH; | |
break; | |
} | |
halt_sys(m); | |
return NULL; /* NOT REACHED OR REACHED ON ERROR */ | |
} | |
/* | |
return a pointer to the register given by the R/RM field of | |
the modrm byte, for word operands. | |
Also enables the decoding of instructions. | |
*/ | |
uint16 *decode_rm_word_register(PC_ENV *m, int reg) | |
{ | |
switch(reg) | |
{ | |
case 0: | |
return &m->R_AX; | |
break; | |
case 1: | |
return &m->R_CX; | |
break; | |
case 2: | |
return &m->R_DX; | |
break; | |
case 3: | |
return &m->R_BX; | |
break; | |
case 4: | |
return &m->R_SP; | |
break; | |
case 5: | |
return &m->R_BP; | |
break; | |
case 6: | |
return &m->R_SI; | |
break; | |
case 7: | |
return &m->R_DI; | |
break; | |
} | |
halt_sys(m); | |
return NULL; /* NOTREACHED OR REACHED ON ERROR*/ | |
} | |
/* | |
return a pointer to the register given by the R/RM field of | |
the modrm byte, for word operands, modified from above | |
for the weirdo special case of segreg operands. | |
Also enables the decoding of instructions. | |
*/ | |
uint16 *decode_rm_seg_register(PC_ENV *m, int reg) | |
{ | |
switch(reg) | |
{ | |
case 0: | |
return &m->R_ES; | |
break; | |
case 1: | |
return &m->R_CS; | |
break; | |
case 2: | |
return &m->R_SS; | |
break; | |
case 3: | |
return &m->R_DS; | |
break; | |
case 4: | |
case 5: | |
case 6: | |
case 7: | |
break; | |
} | |
halt_sys(m); | |
return NULL; /* NOT REACHED OR REACHED ON ERROR */ | |
} | |
/* once the instruction is fetched, an optional byte follows which | |
has 3 fields encoded in it. This routine fetches the byte | |
and breaks into the three fields. | |
*/ | |
uint8 fetch_byte_imm(PC_ENV *m) | |
{ | |
uint8 fetched; | |
/* do the fetch in real mode. Shift the CS segment register | |
over by 4 bits, and add in the IP register. Index into | |
the system memory. | |
*/ | |
/* [JCE] Wrap at 1Mb (the A20 gate) */ | |
fetched = GetBYTEExtended((((uint32)m->R_CS << 4) + (m->R_IP++)) & 0xFFFFF); | |
return fetched; | |
} | |
uint16 fetch_word_imm(PC_ENV *m) | |
{ | |
uint16 fetched; | |
/* do the fetch in real mode. Shift the CS segment register | |
over by 4 bits, and add in the IP register. Index into | |
the system PC_ENVory. | |
*/ | |
/* [JCE] Wrap at 1Mb (the A20 gate) */ | |
fetched = GetBYTEExtended((((uint32)m->R_CS << 4) + (m->R_IP++)) & 0xFFFFF); | |
fetched |= (GetBYTEExtended((((uint32)m->R_CS << 4) + (m->R_IP++)) & 0xFFFFF) << 8); | |
return fetched; | |
} | |
/* | |
return the offset given by mod=00 addressing. | |
Also enables the decoding of instructions. | |
*/ | |
uint16 decode_rm00_address(PC_ENV *m, int rm) | |
{ | |
uint16 offset; | |
/* note the code which specifies the corresponding segment (ds vs ss) | |
below in the case of [BP+..]. The assumption here is that at the | |
point that this subroutine is called, the bit corresponding to | |
SYSMODE_SEG_DS_SS will be zero. After every instruction | |
except the segment override instructions, this bit (as well | |
as any bits indicating segment overrides) will be clear. So | |
if a SS access is needed, set this bit. Otherwise, DS access | |
occurs (unless any of the segment override bits are set). | |
*/ | |
switch(rm) | |
{ | |
case 0: | |
return (int16)m->R_BX + (int16)m->R_SI; | |
break; | |
case 1: | |
return (int16)m->R_BX + (int16)m->R_DI; | |
break; | |
case 2: | |
m->sysmode |= SYSMODE_SEG_DS_SS; | |
return (int16)m->R_BP + (int16)m->R_SI; | |
break; | |
case 3: | |
m->sysmode |= SYSMODE_SEG_DS_SS; | |
return (int16)m->R_BP + (int16)m->R_DI; | |
break; | |
case 4: | |
return m->R_SI; | |
break; | |
case 5: | |
return m->R_DI; | |
break; | |
case 6: | |
offset = (int16)fetch_word_imm(m); | |
return offset; | |
break; | |
case 7: | |
return m->R_BX; | |
} | |
halt_sys(m); | |
return 0; | |
} | |
/* | |
return the offset given by mod=01 addressing. | |
Also enables the decoding of instructions. | |
*/ | |
uint16 decode_rm01_address(PC_ENV *m, int rm) | |
{ | |
int8 displacement; | |
/* note comment on decode_rm00_address above */ | |
displacement = (int8)fetch_byte_imm(m); /* !!!! Check this */ | |
switch(rm) | |
{ | |
case 0: | |
return (int16)m->R_BX + (int16)m->R_SI + displacement; | |
break; | |
case 1: | |
return (int16)m->R_BX + (int16)m->R_DI + displacement; | |
break; | |
case 2: | |
m->sysmode |= SYSMODE_SEG_DS_SS; | |
return (int16)m->R_BP + (int16)m->R_SI + displacement; | |
break; | |
case 3: | |
m->sysmode |= SYSMODE_SEG_DS_SS; | |
return (int16)m->R_BP + (int16)m->R_DI + displacement; | |
break; | |
case 4: | |
return (int16)m->R_SI + displacement; | |
break; | |
case 5: | |
return (int16)m->R_DI + displacement; | |
break; | |
case 6: | |
m->sysmode |= SYSMODE_SEG_DS_SS; | |
return (int16)m->R_BP + displacement; | |
break; | |
case 7: | |
return (int16)m->R_BX + displacement; | |
break; | |
} | |
halt_sys(m); | |
return 0; /* SHOULD NOT HAPPEN */ | |
} | |
/* | |
return the offset given by mod=01 addressing. | |
Also enables the decoding of instructions. | |
*/ | |
uint16 decode_rm10_address(PC_ENV *m, int rm) | |
{ | |
int16 displacement; | |
/* note comment on decode_rm00_address above */ | |
displacement = (int16)fetch_word_imm(m); | |
switch(rm) | |
{ | |
case 0: | |
return (int16)m->R_BX + (int16)m->R_SI + displacement; | |
break; | |
case 1: | |
return (int16)m->R_BX + (int16)m->R_DI + displacement; | |
break; | |
case 2: | |
m->sysmode |= SYSMODE_SEG_DS_SS; | |
return (int16)m->R_BP + (int16)m->R_SI + displacement; | |
break; | |
case 3: | |
m->sysmode |= SYSMODE_SEG_DS_SS; | |
return (int16)m->R_BP + (int16)m->R_DI + displacement; | |
break; | |
case 4: | |
return (int16)m->R_SI + displacement; | |
break; | |
case 5: | |
return (int16)m->R_DI + displacement; | |
break; | |
case 6: | |
m->sysmode |= SYSMODE_SEG_DS_SS; | |
return (int16)m->R_BP + displacement; | |
break; | |
case 7: | |
return (int16)m->R_BX + displacement; | |
break; | |
} | |
halt_sys(m); | |
return 0; | |
/*NOTREACHED */ | |
} | |
/* fetch a byte of data, given an offset, the current register set, | |
and a descriptor for memory. | |
*/ | |
uint8 fetch_data_byte(PC_ENV *m, uint16 offset) | |
{ | |
register uint8 value; | |
/* this code originally completely broken, and never showed | |
up since the DS segments === SS segment in all test cases. | |
It had been originally assumed, that all access to data would | |
involve the DS register unless there was a segment override. | |
Not so. Address modes such as -3[BP] or 10[BP+SI] all | |
refer to addresses relative to the SS. So, at the minimum, | |
all decodings of addressing modes would have to set/clear | |
a bit describing whether the access is relative to DS or SS. | |
That is the function of the cpu-state-varible m->sysmode. | |
There are several potential states: | |
repe prefix seen (handled elsewhere) | |
repne prefix seen (ditto) | |
cs segment override | |
ds segment override | |
es segment override | |
ss segment override | |
ds/ss select (in absense of override) | |
Each of the above 7 items are handled with a bit in the sysmode | |
field. | |
The latter 5 can be implemented as a simple state machine: | |
*/ | |
switch(m->sysmode & SYSMODE_SEGMASK) | |
{ | |
case 0: | |
/* default case: use ds register */ | |
value = GetBYTEExtended(((uint32)m->R_DS<<4) + offset); | |
break; | |
case SYSMODE_SEG_DS_SS: | |
/* non-overridden, use ss register */ | |
/* [JCE] Wrap at 1Mb (the A20 gate) */ | |
value = GetBYTEExtended((((uint32)m->R_SS << 4) + offset) & 0xFFFFF); | |
break; | |
case SYSMODE_SEGOVR_CS: | |
/* ds overridden */ | |
case SYSMODE_SEGOVR_CS|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use cs register */ | |
/* [JCE] Wrap at 1Mb (the A20 gate) */ | |
value = GetBYTEExtended((((uint32)m->R_CS << 4) + offset) & 0xFFFFF); | |
break; | |
case SYSMODE_SEGOVR_DS: | |
/* ds overridden --- shouldn't happen, but hey. */ | |
case SYSMODE_SEGOVR_DS|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use ds register */ | |
/* [JCE] Wrap at 1Mb (the A20 gate) */ | |
value = GetBYTEExtended((((uint32)m->R_DS << 4) + offset) & 0xFFFFF); | |
break; | |
case SYSMODE_SEGOVR_ES: | |
/* ds overridden */ | |
case SYSMODE_SEGOVR_ES|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use es register */ | |
/* [JCE] Wrap at 1Mb (the A20 gate) */ | |
value = GetBYTEExtended((((uint32)m->R_ES << 4) + offset) & 0xFFFFF); | |
break; | |
case SYSMODE_SEGOVR_SS: | |
/* ds overridden */ | |
case SYSMODE_SEGOVR_SS|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use ss register === should not happen */ | |
/* [JCE] Wrap at 1Mb (the A20 gate) */ | |
value = GetBYTEExtended((((uint32)m->R_SS << 4) + offset) & 0xFFFFF); | |
break; | |
default: | |
sim_printf("error: should not happen: multiple overrides. " NLP); | |
value = 0; | |
halt_sys(m); | |
} | |
return value; | |
} | |
/* fetch a byte of data, given an offset, the current register set, | |
and a descriptor for memory. | |
*/ | |
uint8 fetch_data_byte_abs(PC_ENV *m, uint16 segment, uint16 offset) | |
{ | |
register uint8 value; | |
uint32 addr; | |
/* note, cannot change this, since we do not know the ID of the segment. */ | |
/* [JCE] Simulate wrap at top of memory (the A20 gate) */ | |
/* addr = (segment << 4) + offset; */ | |
addr = ((segment << 4) + offset) & 0xFFFFF; | |
value = GetBYTEExtended(addr); | |
return value; | |
} | |
/* fetch a byte of data, given an offset, the current register set, | |
and a descriptor for memory. | |
*/ | |
uint16 fetch_data_word(PC_ENV *m, uint16 offset) | |
{ | |
uint16 value; | |
/* See note above in fetch_data_byte. */ | |
switch(m->sysmode & SYSMODE_SEGMASK) | |
{ | |
case 0: | |
/* default case: use ds register */ | |
/* [JCE] Wrap at 1Mb (the A20 gate) */ | |
value = GetBYTEExtended((((uint32)m->R_DS << 4) + offset) & 0xFFFFF) | |
| (GetBYTEExtended((((uint32)m->R_DS << 4) + | |
(uint16)(offset + 1)) & 0xFFFFF) << 8); | |
break; | |
case SYSMODE_SEG_DS_SS: | |
/* non-overridden, use ss register */ | |
/* [JCE] Wrap at 1Mb (the A20 gate) */ | |
value = GetBYTEExtended((((uint32)m->R_SS << 4) + offset) & 0xFFFFF) | |
| (GetBYTEExtended((((uint32)m->R_SS << 4) | |
+ (uint16)(offset + 1)) & 0xFFFFF) << 8); | |
break; | |
case SYSMODE_SEGOVR_CS: | |
/* ds overridden */ | |
case SYSMODE_SEGOVR_CS|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use cs register */ | |
/* [JCE] Wrap at 1Mb (the A20 gate) */ | |
value = GetBYTEExtended((((uint32)m->R_CS << 4) + offset) & 0xFFFFF) | |
| (GetBYTEExtended((((uint32)m->R_CS << 4) | |
+ (uint16)(offset + 1)) & 0xFFFFF) << 8); | |
break; | |
case SYSMODE_SEGOVR_DS: | |
/* ds overridden --- shouldn't happen, but hey. */ | |
case SYSMODE_SEGOVR_DS|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use ds register */ | |
/* [JCE] Wrap at 1Mb (the A20 gate) */ | |
value = GetBYTEExtended((((uint32)m->R_DS << 4) + offset) & 0xFFFFF) | |
| (GetBYTEExtended((((uint32)m->R_DS << 4) | |
+ (uint16)(offset + 1)) & 0xFFFFF) << 8); | |
break; | |
case SYSMODE_SEGOVR_ES: | |
/* ds overridden */ | |
case SYSMODE_SEGOVR_ES|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use es register */ | |
value = GetBYTEExtended((((uint32)m->R_ES << 4) + offset) & 0xFFFFF) | |
| (GetBYTEExtended((((uint32)m->R_ES << 4) + | |
(uint16)(offset + 1)) & 0xFFFFF) << 8); | |
break; | |
case SYSMODE_SEGOVR_SS: | |
/* ds overridden */ | |
case SYSMODE_SEGOVR_SS|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use ss register === should not happen */ | |
value = GetBYTEExtended((((uint32)m->R_SS << 4) + offset) & 0xFFFFF) | |
| (GetBYTEExtended((((uint32)m->R_SS << 4) | |
+ (uint16)(offset + 1)) & 0xFFFFF) << 8); | |
break; | |
default: | |
sim_printf("error: should not happen: multiple overrides. " NLP); | |
value = 0; | |
halt_sys(m); | |
} | |
return value; | |
} | |
/* fetch a byte of data, given an offset, the current register set, | |
and a descriptor for memory. | |
*/ | |
uint16 fetch_data_word_abs(PC_ENV *m, uint16 segment, uint16 offset) | |
{ | |
uint16 value; | |
uint32 addr; | |
/* [JCE] Simulate wrap at top of memory (the A20 gate) */ | |
/* addr = (segment << 4) + offset; */ | |
addr = ((segment << 4) + offset) & 0xFFFFF; | |
value = GetBYTEExtended(addr) | (GetBYTEExtended(addr + 1) << 8); | |
return value; | |
} | |
/* Store a byte of data, given an offset, the current register set, | |
and a descriptor for memory. | |
*/ | |
void store_data_byte(PC_ENV *m, uint16 offset, uint8 val) | |
{ | |
/* See note above in fetch_data_byte. */ | |
uint32 addr; | |
register uint16 segment; | |
switch(m->sysmode & SYSMODE_SEGMASK) | |
{ | |
case 0: | |
/* default case: use ds register */ | |
segment = m->R_DS; | |
break; | |
case SYSMODE_SEG_DS_SS: | |
/* non-overridden, use ss register */ | |
segment = m->R_SS; | |
break; | |
case SYSMODE_SEGOVR_CS: | |
/* ds overridden */ | |
case SYSMODE_SEGOVR_CS|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use cs register */ | |
segment = m->R_CS; | |
break; | |
case SYSMODE_SEGOVR_DS: | |
/* ds overridden --- shouldn't happen, but hey. */ | |
case SYSMODE_SEGOVR_DS|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use ds register */ | |
segment = m->R_DS; | |
break; | |
case SYSMODE_SEGOVR_ES: | |
/* ds overridden */ | |
case SYSMODE_SEGOVR_ES|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use es register */ | |
segment = m->R_ES; | |
break; | |
case SYSMODE_SEGOVR_SS: | |
/* ds overridden */ | |
case SYSMODE_SEGOVR_SS|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use ss register === should not happen */ | |
segment = m->R_SS; | |
break; | |
default: | |
sim_printf("error: should not happen: multiple overrides. " NLP); | |
segment = 0; | |
halt_sys(m); | |
} | |
/* [JCE] Simulate wrap at top of memory (the A20 gate) */ | |
/* addr = (segment << 4) + offset; */ | |
addr = (((uint32)segment << 4) + offset) & 0xFFFFF; | |
PutBYTEExtended(addr, val); | |
} | |
void store_data_byte_abs(PC_ENV *m, uint16 segment, uint16 offset, uint8 val) | |
{ | |
register uint32 addr; | |
/* [JCE] Simulate wrap at top of memory (the A20 gate) */ | |
/* addr = (segment << 4) + offset; */ | |
addr = (((uint32)segment << 4) + offset) & 0xFFFFF; | |
PutBYTEExtended(addr, val); | |
} | |
/* Store a word of data, given an offset, the current register set, | |
and a descriptor for memory. | |
*/ | |
void store_data_word(PC_ENV *m, uint16 offset, uint16 val) | |
{ | |
register uint32 addr; | |
register uint16 segment; | |
/* See note above in fetch_data_byte. */ | |
switch(m->sysmode & SYSMODE_SEGMASK) | |
{ | |
case 0: | |
/* default case: use ds register */ | |
segment = m->R_DS; | |
break; | |
case SYSMODE_SEG_DS_SS: | |
/* non-overridden, use ss register */ | |
segment = m->R_SS; | |
break; | |
case SYSMODE_SEGOVR_CS: | |
/* ds overridden */ | |
case SYSMODE_SEGOVR_CS|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use cs register */ | |
segment = m->R_CS; | |
break; | |
case SYSMODE_SEGOVR_DS: | |
/* ds overridden --- shouldn't happen, but hey. */ | |
case SYSMODE_SEGOVR_DS|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use ds register */ | |
segment = m->R_DS; | |
break; | |
case SYSMODE_SEGOVR_ES: | |
/* ds overridden */ | |
case SYSMODE_SEGOVR_ES|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use es register */ | |
segment = m->R_ES; | |
break; | |
case SYSMODE_SEGOVR_SS: | |
/* ds overridden */ | |
case SYSMODE_SEGOVR_SS|SYSMODE_SEG_DS_SS: | |
/* ss overridden, use ss register === should not happen */ | |
segment = m->R_SS; | |
break; | |
default: | |
sim_printf("error: should not happen: multiple overrides." NLP); | |
segment = 0; | |
halt_sys(m); | |
} | |
/* [JCE] Simulate wrap at top of memory (the A20 gate) */ | |
/* addr = (segment << 4) + offset; */ | |
addr = (((uint32)segment << 4) + offset) & 0xFFFFF; | |
PutBYTEExtended(addr, val & 0xff); | |
PutBYTEExtended(addr + 1, val >> 8); | |
} | |
void store_data_word_abs(PC_ENV *m, uint16 segment, uint16 offset, uint16 val) | |
{ | |
register uint32 addr; | |
/* [JCE] Wrap at top of memory */ | |
addr = ((segment << 4) + offset) & 0xFFFFF; | |
PutBYTEExtended(addr, val & 0xff); | |
PutBYTEExtended(addr + 1, val >> 8); | |
} |