/* pdp11_rh.c: PDP-11 Massbus adapter simulator | |
Copyright (c) 2005-2013, Robert M Supnik | |
Permission is hereby granted, free of charge, to any person obtaining a | |
copy of this software and associated documentation files (the "Software"), | |
to deal in the Software without restriction, including without limitation | |
the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
and/or sell copies of the Software, and to permit persons to whom the | |
Software is furnished to do so, subject to the following conditions: | |
The above copyright notice and this permission notice shall be included in | |
all copies or substantial portions of the Software. | |
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
Except as contained in this notice, the name of Robert M Supnik shall not be | |
used in advertising or otherwise to promote the sale, use or other dealings | |
in this Software without prior written authorization from Robert M Supnik. | |
rha, rhb, rhc RH11/RH70 Massbus adapter | |
02-Sep-13 RMS Added third Massbus adapter, debug printouts | |
19-Mar-12 RMS Fixed declaration of cpu_opt (Mark Pizzolato) | |
02-Feb-08 RMS Fixed DMA memory address limit test (John Dundas) | |
17-May-07 RMS Moved CS1 drive enable to devices | |
21-Nov-05 RMS Added enable/disable routine | |
07-Jul-05 RMS Removed extraneous externs | |
WARNING: The interupt logic of the RH11/RH70 is unusual and must be | |
simulated with great precision. The RH11 has an internal interrupt | |
request flop, CSTB INTR, which is controlled as follows: | |
- Writing IE and DONE simultaneously sets CSTB INTR | |
- Controller clear, INIT, and interrupt acknowledge clear CSTB INTR | |
(and also clear IE) | |
- A transition of DONE from 0 to 1 sets CSTB INTR from IE | |
The output of CSTB INTR is OR'd with the AND of RPCS1<SC,DONE,IE> to | |
create the interrupt request signal. Thus, | |
- The DONE interrupt is edge sensitive, but the SC interrupt is | |
level sensitive. | |
- The DONE interrupt, once set, is not disabled if IE is cleared, | |
but the SC interrupt is. | |
*/ | |
#if defined (VM_PDP10) /* PDP10 version */ | |
#error "PDP-10 uses pdp10_rp.c and pdp10_tu.c!" | |
#elif defined (VM_VAX) /* VAX version */ | |
#error "VAX uses vax780_mba.c!" | |
#else /* PDP-11 version */ | |
#include "pdp11_defs.h" | |
#endif | |
/* CS1 - base + 000 - control/status 1 */ | |
#define CS1_OF 0 | |
#define CS1_GO CSR_GO /* go */ | |
#define CS1_V_FNC 1 /* function pos */ | |
#define CS1_M_FNC 037 /* function mask */ | |
#define CS1_FNC (CS1_M_FNC << CS1_V_FNC) | |
#define FNC_XFER 024 /* >=? data xfr */ | |
#define CS1_IE CSR_IE /* int enable */ | |
#define CS1_DONE CSR_DONE /* ready */ | |
#define CS1_V_UAE 8 /* Unibus addr ext */ | |
#define CS1_M_UAE 03 | |
#define CS1_UAE (CS1_M_UAE << CS1_V_UAE) | |
#define CS1_MCPE 0020000 /* Mbus par err NI */ | |
#define CS1_TRE 0040000 /* transfer err */ | |
#define CS1_SC 0100000 /* special cond */ | |
#define CS1_MBZ 0012000 | |
#define CS1_DRV (CS1_FNC | CS1_GO) | |
#define GET_FNC(x) (((x) >> CS1_V_FNC) & CS1_M_FNC) | |
/* WC - base + 002 - word count */ | |
#define WC_OF 1 | |
/* BA - base + 004 - base address */ | |
#define BA_OF 2 | |
#define BA_MBZ 0000001 /* must be zero */ | |
/* CS2 - base + 010 - control/status 2 */ | |
#define CS2_OF 3 | |
#define CS2_V_UNIT 0 /* unit pos */ | |
#define CS2_M_UNIT 07 /* unit mask */ | |
#define CS2_UNIT (CS2_M_UNIT << CS2_V_UNIT) | |
#define CS2_UAI 0000010 /* addr inhibit */ | |
#define CS2_PAT 0000020 /* parity test NI */ | |
#define CS2_CLR 0000040 /* controller clear */ | |
#define CS2_IR 0000100 /* input ready */ | |
#define CS2_OR 0000200 /* output ready */ | |
#define CS2_MDPE 0000400 /* Mbus par err NI */ | |
#define CS2_MXF 0001000 /* missed xfer NI */ | |
#define CS2_PGE 0002000 /* program err */ | |
#define CS2_NEM 0004000 /* nx mem err */ | |
#define CS2_NED 0010000 /* nx drive err */ | |
#define CS2_PE 0020000 /* parity err NI */ | |
#define CS2_WCE 0040000 /* write check err */ | |
#define CS2_DLT 0100000 /* data late NI */ | |
#define CS2_MBZ (CS2_CLR) | |
#define CS2_RW (CS2_UNIT | CS2_UAI | CS2_PAT | CS2_MXF | CS2_PE) | |
#define CS2_ERR (CS2_MDPE | CS2_MXF | CS2_PGE | CS2_NEM | \ | |
CS2_NED | CS2_PE | CS2_WCE | CS2_DLT) | |
#define GET_UNIT(x) (((x) >> CS2_V_UNIT) & CS2_M_UNIT) | |
/* DB - base + 022 - data buffer */ | |
#define DB_OF 4 | |
/* BAE - base + 050/34 - bus address extension */ | |
#define BAE_OF 5 | |
#define AE_M_MAE 0 /* addr ext pos */ | |
#define AE_V_MAE 077 /* addr ext mask */ | |
#define AE_MBZ 0177700 | |
/* CS3 - base + 052/36 - control/status 3 */ | |
#define CS3_OF 6 | |
#define CS3_APE 0100000 /* addr perr - NI */ | |
#define CS3_DPO 0040000 /* data perr odd - NI */ | |
#define CS3_DPE 0020000 /* data perr even - NI */ | |
#define CS3_WCO 0010000 /* wchk err odd */ | |
#define CS3_WCE 0004000 /* wchk err even */ | |
#define CS3_DBL 0002000 /* dbl word xfer - NI */ | |
#define CS3_IPCK 0000017 /* wrong par - NI */ | |
#define CS3_ERR (CS3_APE|CS3_DPO|CS3_DPE|CS3_WCO|CS3_WCE) | |
#define CS3_MBZ 0001660 | |
#define CS3_RW (CS1_IE | CS3_IPCK) | |
#define MBA_OFSMASK 077 /* max 32 reg */ | |
#define INT 0000 /* int reg flag */ | |
#define EXT 0100 /* ext reg flag */ | |
/* Declarations */ | |
#define RH11 (cpu_opt & OPT_RH11) | |
typedef struct { | |
uint32 cs1; /* ctrl/status 1 */ | |
uint32 wc; /* word count */ | |
uint32 ba; /* bus addr */ | |
uint32 cs2; /* ctrl/status 2 */ | |
uint32 db; /* data buffer */ | |
uint32 bae; /* addr ext */ | |
uint32 cs3; /* ctrl/status 3 */ | |
uint32 iff; /* int flip flop */ | |
} MBACTX; | |
MBACTX massbus[MBA_NUM]; | |
t_stat mba_reset (DEVICE *dptr); | |
t_stat mba_rd (int32 *val, int32 pa, int32 access); | |
t_stat mba_wr (int32 val, int32 pa, int32 access); | |
t_stat mba_set_type (UNIT *uptr, int32 val, char *cptr, CONST void *desc); | |
t_stat mba_show_type (FILE *st, UNIT *uptr, int32 val, CONST void *desc); | |
int32 mba0_inta (void); | |
int32 mba1_inta (void); | |
int32 mba2_inta (void); | |
void mba_set_int (uint32 mb); | |
void mba_clr_int (uint32 mb); | |
void mba_upd_cs1 (uint32 set, uint32 clr, uint32 mb); | |
void mba_set_cs2 (uint32 flg, uint32 mb); | |
int32 mba_map_pa (int32 pa, int32 *ofs); | |
t_stat rh_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr); | |
const char *rh_description (DEVICE *dptr); | |
extern uint32 Map_Addr (uint32 ba); | |
/* Massbus register dispatches */ | |
static t_stat (*mbregR[MBA_NUM])(int32 *dat, int32 ad, int32 md); | |
static t_stat (*mbregW[MBA_NUM])(int32 dat, int32 ad, int32 md); | |
static int32 (*mbabort[MBA_NUM])(void); | |
static int32 mba_active = 0; /* Number of active MBA's */ | |
/* Unibus to register offset map */ | |
static int32 mba_mapofs[(MBA_OFSMASK + 1) >> 1] = { | |
INT|0, INT|1, INT|2, EXT|5, INT|3, EXT|1, EXT|2, EXT|4, | |
EXT|7, INT|4, EXT|3, EXT|6, EXT|8, EXT|9, EXT|10, EXT|11, | |
EXT|12, EXT|13, EXT|14, EXT|15, EXT|16, EXT|17, EXT|18, EXT|19, | |
EXT|20, EXT|21, EXT|22, EXT|23, EXT|24, EXT|25, EXT|26, EXT|27 | |
}; | |
/* Massbus adapter data structures | |
mbax_dev RHx device descriptor | |
mbax_unit RHx units | |
mbax_reg RHx register list | |
*/ | |
DIB mba0_dib = { | |
IOBA_AUTO, 0, &mba_rd, &mba_wr, | |
1, IVCL (RP), VEC_AUTO, { &mba0_inta } | |
}; | |
UNIT mba0_unit = { UDATA (NULL, 0, 0) }; | |
REG mba0_reg[] = { | |
{ ORDATA (CS1, massbus[0].cs1, 16) }, | |
{ ORDATA (WC, massbus[0].wc, 16) }, | |
{ ORDATA (BA, massbus[0].ba, 16) }, | |
{ ORDATA (CS2, massbus[0].cs2, 16) }, | |
{ ORDATA (DB, massbus[0].db, 16) }, | |
{ ORDATA (BAE, massbus[0].bae, 6) }, | |
{ ORDATA (CS3, massbus[0].cs3, 16) }, | |
{ FLDATA (IFF, massbus[0].iff, 0) }, | |
{ FLDATA (INT, IREQ (RP), INT_V_RP) }, | |
{ FLDATA (SC, massbus[0].cs1, CSR_V_ERR) }, | |
{ FLDATA (DONE, massbus[0].cs1, CSR_V_DONE) }, | |
{ FLDATA (IE, massbus[0].cs1, CSR_V_IE) }, | |
{ ORDATA (DEVADDR, mba0_dib.ba, 32), REG_HRO }, | |
{ ORDATA (DEVVEC, mba0_dib.vec, 16), REG_HRO }, | |
{ NULL } | |
}; | |
MTAB mba0_mod[] = { | |
{ MTAB_XTD|MTAB_VDV, 0100, "ADDRESS", "ADDRESS", | |
&set_addr, &show_addr, NULL }, | |
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", "VECTOR", | |
&set_vec, &show_vec, NULL }, | |
{ 0 } | |
}; | |
DIB mba1_dib = { | |
IOBA_AUTO, 0, &mba_rd, &mba_wr, | |
1, IVCL (TU), VEC_AUTO, { &mba1_inta } | |
}; | |
UNIT mba1_unit = { UDATA (NULL, 0, 0) }; | |
REG mba1_reg[] = { | |
{ ORDATA (CS1, massbus[1].cs1, 16) }, | |
{ ORDATA (WC, massbus[1].wc, 16) }, | |
{ ORDATA (BA, massbus[1].ba, 16) }, | |
{ ORDATA (CS2, massbus[1].cs2, 16) }, | |
{ ORDATA (DB, massbus[1].db, 16) }, | |
{ ORDATA (BAE, massbus[1].bae, 6) }, | |
{ ORDATA (CS3, massbus[1].cs3, 16) }, | |
{ FLDATA (IFF, massbus[1].iff, 0) }, | |
{ FLDATA (INT, IREQ (TU), INT_V_TU) }, | |
{ FLDATA (SC, massbus[1].cs1, CSR_V_ERR) }, | |
{ FLDATA (DONE, massbus[1].cs1, CSR_V_DONE) }, | |
{ FLDATA (IE, massbus[1].cs1, CSR_V_IE) }, | |
{ ORDATA (DEVADDR, mba1_dib.ba, 32), REG_HRO }, | |
{ ORDATA (DEVVEC, mba1_dib.vec, 16), REG_HRO }, | |
{ NULL } | |
}; | |
MTAB mba1_mod[] = { | |
{ MTAB_XTD|MTAB_VDV, 0040, "ADDRESS", "ADDRESS", | |
&set_addr, &show_addr, NULL }, | |
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", "VECTOR", | |
&set_vec, &show_vec, NULL }, | |
{ 0 } | |
}; | |
DIB mba2_dib = { | |
IOBA_AUTO, 0, &mba_rd, &mba_wr, | |
1, IVCL (RS), VEC_AUTO, { &mba2_inta } | |
}; | |
UNIT mba2_unit = { UDATA (NULL, 0, 0) }; | |
REG mba2_reg[] = { | |
{ ORDATA (CS1, massbus[2].cs1, 16) }, | |
{ ORDATA (WC, massbus[2].wc, 16) }, | |
{ ORDATA (BA, massbus[2].ba, 16) }, | |
{ ORDATA (CS2, massbus[2].cs2, 16) }, | |
{ ORDATA (DB, massbus[2].db, 16) }, | |
{ ORDATA (BAE, massbus[2].bae, 6) }, | |
{ ORDATA (CS3, massbus[2].cs3, 16) }, | |
{ FLDATA (IFF, massbus[2].iff, 0) }, | |
{ FLDATA (INT, IREQ (TU), INT_V_TU) }, | |
{ FLDATA (SC, massbus[2].cs1, CSR_V_ERR) }, | |
{ FLDATA (DONE, massbus[2].cs1, CSR_V_DONE) }, | |
{ FLDATA (IE, massbus[2].cs1, CSR_V_IE) }, | |
{ ORDATA (DEVADDR, mba2_dib.ba, 32), REG_HRO }, | |
{ ORDATA (DEVVEC, mba2_dib.vec, 16), REG_HRO }, | |
{ NULL } | |
}; | |
MTAB mba2_mod[] = { | |
{ MTAB_XTD|MTAB_VDV, 0040, "ADDRESS", "ADDRESS", | |
&set_addr, &show_addr, NULL }, | |
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", "VECTOR", | |
&set_vec, &show_vec, NULL }, | |
{ 0 } | |
}; | |
DEVICE mba_dev[] = { | |
{ | |
"RHA", &mba0_unit, mba0_reg, mba0_mod, | |
1, 0, 0, 0, 0, 0, | |
NULL, NULL, &mba_reset, | |
NULL, NULL, NULL, | |
&mba0_dib, DEV_DEBUG | DEV_UBUS | DEV_QBUS, 0, | |
NULL, NULL, NULL, &rh_help, NULL, NULL, | |
&rh_description | |
}, | |
{ | |
"RHB", &mba1_unit, mba1_reg, mba1_mod, | |
1, 0, 0, 0, 0, 0, | |
NULL, NULL, &mba_reset, | |
NULL, NULL, NULL, | |
&mba1_dib, DEV_DEBUG | DEV_UBUS | DEV_QBUS, 0, | |
NULL, NULL, NULL, &rh_help, NULL, NULL, | |
&rh_description | |
}, | |
{ | |
"RHC", &mba2_unit, mba2_reg, mba2_mod, | |
1, 0, 0, 0, 0, 0, | |
NULL, NULL, &mba_reset, | |
NULL, NULL, NULL, | |
&mba2_dib, DEV_DEBUG | DEV_UBUS | DEV_QBUS, 0, | |
NULL, NULL, NULL, &rh_help, NULL, NULL, | |
&rh_description | |
} | |
}; | |
/* Read Massbus adapter register */ | |
t_stat mba_rd (int32 *val, int32 pa, int32 mode) | |
{ | |
int32 ofs, dat, mb, drv; | |
t_stat r; | |
mb = mba_map_pa (pa, &ofs); /* get mb number */ | |
if ((mb < 0) || (ofs < 0)) /* valid? */ | |
return SCPE_NXM; | |
drv = GET_UNIT (massbus[mb].cs2); /* get drive */ | |
mba_upd_cs1 (0, 0, mb); /* update CS1 */ | |
if (ofs & EXT) { /* external? */ | |
if (!mbregR[mb]) /* device there? */ | |
return SCPE_NXM; | |
r = mbregR[mb] (val, ofs & ~EXT, drv); /* call device */ | |
if (r == MBE_NXD) /* nx drive? */ | |
mba_set_cs2 (CS2_NED, mb); | |
else if (r == MBE_NXR) /* nx reg? */ | |
return SCPE_NXM; | |
return SCPE_OK; | |
} | |
switch (ofs) { /* case on reg */ | |
case CS1_OF: /* CS1 */ | |
if (!mbregR[mb]) /* nx device? */ | |
return SCPE_NXM; | |
r = mbregR[mb] (&dat, ofs, drv); /* get dev cs1 */ | |
if (r == MBE_NXD) /* nx drive? */ | |
mba_set_cs2 (CS2_NED, mb); | |
*val = massbus[mb].cs1 | dat; | |
break; | |
case WC_OF: /* WC */ | |
*val = massbus[mb].wc; | |
break; | |
case BA_OF: /* BA */ | |
*val = massbus[mb].ba & ~BA_MBZ; | |
break; | |
case CS2_OF: /* CS2 */ | |
*val = massbus[mb].cs2 = (massbus[mb].cs2 & ~CS2_MBZ) | CS2_IR | CS2_OR; | |
break; | |
case DB_OF: /* DB */ | |
*val = massbus[mb].db; | |
break; | |
case BAE_OF: /* BAE */ | |
*val = massbus[mb].bae = massbus[mb].bae & ~AE_MBZ; | |
break; | |
case CS3_OF: /* CS3 */ | |
*val = massbus[mb].cs3 = (massbus[mb].cs3 & ~(CS1_IE | CS3_MBZ)) | | |
(massbus[mb].cs1 & CS1_IE); | |
break; | |
default: /* huh? */ | |
return SCPE_NXM; | |
} | |
return SCPE_OK; | |
} | |
t_stat mba_wr (int32 val, int32 pa, int32 access) | |
{ | |
int32 ofs, cs1f, drv, mb; | |
t_stat r; | |
t_bool cs1dt; | |
mb = mba_map_pa (pa, &ofs); /* get mb number */ | |
if ((mb < 0) || (ofs < 0)) /* valid? */ | |
return SCPE_NXM; | |
drv = GET_UNIT (massbus[mb].cs2); /* get drive */ | |
if (ofs & EXT) { /* external? */ | |
if (!mbregW[mb]) /* device there? */ | |
return SCPE_NXM; | |
if ((access == WRITEB) && (pa & 1)) /* byte writes */ | |
val = val << 8; /* don't work */ | |
r = mbregW[mb] (val, ofs & ~EXT, drv); /* write dev reg */ | |
if (r == MBE_NXD) /* nx drive? */ | |
mba_set_cs2 (CS2_NED, mb); | |
else if (r == MBE_NXR) /* nx reg? */ | |
return SCPE_NXM; | |
mba_upd_cs1 (0, 0, mb); /* update status */ | |
return SCPE_OK; | |
} | |
cs1f = 0; /* no int on cs1 upd */ | |
switch (ofs) { /* case on reg */ | |
case CS1_OF: /* CS1 */ | |
if (!mbregW[mb]) /* device exist? */ | |
return SCPE_NXM; | |
if ((access == WRITEB) && (pa & 1)) | |
val = val << 8; | |
if (val & CS1_TRE) { /* error clear? */ | |
massbus[mb].cs1 &= ~CS1_TRE; /* clr CS1<TRE> */ | |
massbus[mb].cs2 &= ~CS2_ERR; /* clr CS2<15:8> */ | |
massbus[mb].cs3 &= ~CS3_ERR; /* clr CS3<15:11> */ | |
} | |
if ((access == WRITE) || (pa & 1)) { /* hi byte write? */ | |
if (massbus[mb].cs1 & CS1_DONE) /* done set? */ | |
massbus[mb].cs1 = (massbus[mb].cs1 & ~CS1_UAE) | (val & CS1_UAE); | |
} | |
if ((access == WRITE) || !(pa & 1)) { /* lo byte write? */ | |
if ((val & CS1_DONE) && (val & CS1_IE)) /* to DONE+IE? */ | |
massbus[mb].iff = 1; /* set CSTB INTR */ | |
massbus[mb].cs1 = (massbus[mb].cs1 & ~CS1_IE) | (val & CS1_IE); | |
cs1dt = (val & CS1_GO) && (GET_FNC (val) >= FNC_XFER); | |
if (cs1dt && ((massbus[mb].cs1 & CS1_DONE) == 0)) /* dt, done clr? */ | |
mba_set_cs2 (CS2_PGE, mb); /* prgm error */ | |
else { | |
r = mbregW[mb] (val & 077, ofs, drv); /* write dev CS1 */ | |
if (r == MBE_NXD) /* nx drive? */ | |
mba_set_cs2 (CS2_NED, mb); | |
else if (r == MBE_NXR) /* nx reg? */ | |
return SCPE_NXM; | |
else if (cs1dt && (r == SCPE_OK)) { /* xfer, no err? */ | |
massbus[mb].cs1 &= ~(CS1_TRE | CS1_MCPE | CS1_DONE); | |
massbus[mb].cs2 &= ~CS2_ERR; /* clear errors */ | |
massbus[mb].cs3 &= ~(CS3_ERR | CS3_DBL); | |
if (DEBUG_PRS (mba_dev[mb])) | |
fprintf (sim_deb, ">>RH%d STRT: cs1=%o, cs2=%o,ba=%o, wc=%o\n", | |
mb, massbus[mb].cs1, massbus[mb].cs2, massbus[mb].ba, massbus[mb].wc); | |
} | |
} | |
} | |
massbus[mb].cs3 = (massbus[mb].cs3 & ~CS1_IE) | /* update CS3 */ | |
(massbus[mb].cs1 & CS1_IE); | |
massbus[mb].bae = (massbus[mb].bae & ~CS1_M_UAE) | /* update BAE */ | |
((massbus[mb].cs1 >> CS1_V_UAE) & CS1_M_UAE); | |
break; | |
case WC_OF: /* WC */ | |
if (access == WRITEB) | |
val = (pa & 1)? | |
(massbus[mb].wc & 0377) | (val << 8): | |
(massbus[mb].wc & ~0377) | val; | |
massbus[mb].wc = val; | |
break; | |
case BA_OF: /* BA */ | |
if (access == WRITEB) | |
val = (pa & 1)? | |
(massbus[mb].ba & 0377) | (val << 8): | |
(massbus[mb].ba & ~0377) | val; | |
massbus[mb].ba = val & ~BA_MBZ; | |
break; | |
case CS2_OF: /* CS2 */ | |
if ((access == WRITEB) && (pa & 1)) | |
val = val << 8; | |
if (val & CS2_CLR) /* init? */ | |
mba_reset (&mba_dev[mb]); | |
else { | |
if ((val & ~massbus[mb].cs2) & (CS2_PE | CS2_MXF)) | |
cs1f = CS1_SC; /* diagn intr */ | |
if (access == WRITEB) /* merge val */ | |
val = (massbus[mb].cs2 & ((pa & 1)? 0377: 0177400)) | val; | |
massbus[mb].cs2 = (massbus[mb].cs2 & ~CS2_RW) | | |
(val & CS2_RW) | CS2_IR | CS2_OR; | |
} | |
break; | |
case DB_OF: /* DB */ | |
if (access == WRITEB) | |
val = (pa & 1)? | |
(massbus[mb].db & 0377) | (val << 8): | |
(massbus[mb].db & ~0377) | val; | |
massbus[mb].db = val; | |
break; | |
case BAE_OF: /* BAE */ | |
if ((access == WRITEB) && (pa & 1)) | |
break; | |
massbus[mb].bae = val & ~AE_MBZ; | |
massbus[mb].cs1 = (massbus[mb].cs1 & ~CS1_UAE) | /* update CS1 */ | |
((massbus[mb].bae << CS1_V_UAE) & CS1_UAE); | |
break; | |
case CS3_OF: /* CS3 */ | |
if ((access == WRITEB) && (pa & 1)) | |
break; | |
massbus[mb].cs3 = (massbus[mb].cs3 & ~CS3_RW) | (val & CS3_RW); | |
massbus[mb].cs1 = (massbus[mb].cs1 & ~CS1_IE) | /* update CS1 */ | |
(massbus[mb].cs3 & CS1_IE); | |
break; | |
default: | |
return SCPE_NXM; | |
} | |
mba_upd_cs1 (cs1f, 0, mb); /* update status */ | |
return SCPE_OK; | |
} | |
/* Massbus I/O routines | |
mb_rdbufW - fetch word buffer from memory | |
mb_wrbufW - store word buffer into memory | |
mb_chbufW - compare word buffer with memory | |
Returns number of bytes successfully transferred/checked | |
*/ | |
int32 mba_rdbufW (uint32 mb, int32 bc, uint16 *buf) | |
{ | |
int32 i, j, ba, mbc, pbc; | |
uint32 pa; | |
bc = bc & ~1; /* bc even */ | |
if (mb >= MBA_NUM) /* valid MBA? */ | |
return 0; | |
ba = (massbus[mb].bae << 16) | massbus[mb].ba; /* get busaddr */ | |
mbc = (0200000 - massbus[mb].wc) << 1; /* MB byte count */ | |
if (bc > mbc) /* use smaller */ | |
bc = mbc; | |
for (i = 0; i < bc; i = i + pbc) { /* loop by pages */ | |
if (RH11 && cpu_bme) /* map addr */ | |
pa = Map_Addr (ba); | |
else pa = ba; | |
if (!ADDR_IS_MEM (pa)) { /* NXM? */ | |
mba_set_cs2 (CS2_NEM, mb); /* set error */ | |
break; | |
} | |
pbc = UBM_PAGSIZE - UBM_GETOFF (pa); /* left in page */ | |
if (pbc > (bc - i)) /* limit to rem xfr */ | |
pbc = bc - i; | |
for (j = 0; j < pbc; j = j + 2) { /* loop by words */ | |
*buf++ = M[pa >> 1]; /* fetch word */ | |
if (!(massbus[mb].cs2 & CS2_UAI)) { /* if not inhb */ | |
ba = ba + 2; /* incr ba, pa */ | |
pa = pa + 2; | |
} | |
} | |
} | |
massbus[mb].wc = (massbus[mb].wc + (bc >> 1)) & DMASK; /* update wc */ | |
massbus[mb].ba = ba & DMASK; /* update ba */ | |
massbus[mb].bae = (ba >> 16) & ~AE_MBZ; /* upper 6b */ | |
massbus[mb].cs1 = (massbus[mb].cs1 & ~ CS1_UAE) | /* update CS1 */ | |
((massbus[mb].bae << CS1_V_UAE) & CS1_UAE); | |
return i; | |
} | |
int32 mba_wrbufW (uint32 mb, int32 bc, const uint16 *buf) | |
{ | |
int32 i, j, ba, mbc, pbc; | |
uint32 pa; | |
bc = bc & ~1; /* bc even */ | |
if (mb >= MBA_NUM) /* valid MBA? */ | |
return 0; | |
ba = (massbus[mb].bae << 16) | massbus[mb].ba; /* get busaddr */ | |
mbc = (0200000 - massbus[mb].wc) << 1; /* MB byte count */ | |
if (bc > mbc) /* use smaller */ | |
bc = mbc; | |
for (i = 0; i < bc; i = i + pbc) { /* loop by pages */ | |
if (RH11 && cpu_bme) /* map addr */ | |
pa = Map_Addr (ba); | |
else pa = ba; | |
if (!ADDR_IS_MEM (pa)) { /* NXM? */ | |
mba_set_cs2 (CS2_NEM, mb); /* set error */ | |
break; | |
} | |
pbc = UBM_PAGSIZE - UBM_GETOFF (pa); /* left in page */ | |
if (pbc > (bc - i)) /* limit to rem xfr */ | |
pbc = bc - i; | |
for (j = 0; j < pbc; j = j + 2) { /* loop by words */ | |
M[pa >> 1] = *buf++; /* put word */ | |
if (!(massbus[mb].cs2 & CS2_UAI)) { /* if not inhb */ | |
ba = ba + 2; /* incr ba, pa */ | |
pa = pa + 2; | |
} | |
} | |
} | |
massbus[mb].wc = (massbus[mb].wc + (bc >> 1)) & DMASK; /* update wc */ | |
massbus[mb].ba = ba & DMASK; /* update ba */ | |
massbus[mb].bae = (ba >> 16) & ~AE_MBZ; /* upper 6b */ | |
massbus[mb].cs1 = (massbus[mb].cs1 & ~ CS1_UAE) | /* update CS1 */ | |
((massbus[mb].bae << CS1_V_UAE) & CS1_UAE); | |
return i; | |
} | |
int32 mba_chbufW (uint32 mb, int32 bc, uint16 *buf) | |
{ | |
int32 i, j, ba, mbc, pbc; | |
uint32 pa; | |
bc = bc & ~1; /* bc even */ | |
if (mb >= MBA_NUM) /* valid MBA? */ | |
return 0; | |
ba = (massbus[mb].bae << 16) | massbus[mb].ba; /* get busaddr */ | |
mbc = (0200000 - massbus[mb].wc) << 1; /* MB byte count */ | |
if (bc > mbc) /* use smaller */ | |
bc = mbc; | |
for (i = 0; i < bc; i = i + pbc) { /* loop by pages */ | |
if (RH11 && cpu_bme) pa = Map_Addr (ba); /* map addr */ | |
else pa = ba; | |
if (!ADDR_IS_MEM (pa)) { /* NXM? */ | |
mba_set_cs2 (CS2_NEM, mb); /* set error */ | |
break; | |
} | |
pbc = UBM_PAGSIZE - UBM_GETOFF (pa); /* left in page */ | |
if (pbc > (bc - i)) /* limit to rem xfr */ | |
pbc = bc - i; | |
for (j = 0; j < pbc; j = j + 2) { /* loop by words */ | |
massbus[mb].db = *buf++; /* get dev word */ | |
if (M[pa >> 1] != massbus[mb].db) { /* miscompare? */ | |
mba_set_cs2 (CS2_WCE, mb); /* set error */ | |
massbus[mb].cs3 = massbus[mb].cs3 | /* set even/odd */ | |
((pa & 1)? CS3_WCO: CS3_WCE); | |
break; | |
} | |
if (!(massbus[mb].cs2 & CS2_UAI)) { /* if not inhb */ | |
ba = ba + 2; /* incr ba, pa */ | |
pa = pa + 2; | |
} | |
} | |
} | |
massbus[mb].wc = (massbus[mb].wc + (bc >> 1)) & DMASK; /* update wc */ | |
massbus[mb].ba = ba & DMASK; /* update ba */ | |
massbus[mb].bae = (ba >> 16) & ~AE_MBZ; /* upper 6b */ | |
massbus[mb].cs1 = (massbus[mb].cs1 & ~ CS1_UAE) | /* update CS1 */ | |
((massbus[mb].bae << CS1_V_UAE) & CS1_UAE); | |
return i; | |
} | |
/* Device access, status, and interrupt routines */ | |
void mba_set_don (uint32 mb) | |
{ | |
mba_upd_cs1 (CS1_DONE, 0, mb); | |
if (DEBUG_PRS (mba_dev[mb])) | |
fprintf (sim_deb, ">>RH%d DONE: cs1=%o, cs2=%o,ba=%o, wc=%o\n", | |
mb, massbus[mb].cs1, massbus[mb].cs2, massbus[mb].ba, massbus[mb].wc); | |
return; | |
} | |
void mba_upd_ata (uint32 mb, uint32 val) | |
{ | |
if (val) | |
mba_upd_cs1 (CS1_SC, 0, mb); | |
else mba_upd_cs1 (0, CS1_SC, mb); | |
return; | |
} | |
void mba_set_exc (uint32 mb) | |
{ | |
mba_upd_cs1 (CS1_TRE | CS1_DONE, 0, mb); | |
return; | |
} | |
int32 mba_get_bc (uint32 mb) | |
{ | |
if (mb >= MBA_NUM) | |
return 0; | |
return ((0200000 - massbus[mb].wc) << 1); | |
} | |
int32 mba_get_csr (uint32 mb) | |
{ | |
DIB *dibp; | |
if (mb >= MBA_NUM) | |
return 0; | |
dibp = (DIB *) mba_dev[mb].ctxt; | |
return dibp->ba; | |
} | |
void mba_set_int (uint32 mb) | |
{ | |
DIB *dibp; | |
if (mb >= MBA_NUM) | |
return; | |
dibp = (DIB *) mba_dev[mb].ctxt; | |
int_req[dibp->vloc >> 5] |= (1 << (dibp->vloc & 037)); | |
return; | |
} | |
void mba_clr_int (uint32 mb) | |
{ | |
DIB *dibp; | |
if (mb >= MBA_NUM) | |
return; | |
dibp = (DIB *) mba_dev[mb].ctxt; | |
int_req[dibp->vloc >> 5] &= ~(1 << (dibp->vloc & 037)); | |
return; | |
} | |
void mba_upd_cs1 (uint32 set, uint32 clr, uint32 mb) | |
{ | |
if (mb >= MBA_NUM) | |
return; | |
if ((set & ~massbus[mb].cs1) & CS1_DONE) /* DONE 0 to 1? */ | |
massbus[mb].iff = (massbus[mb].cs1 & CS1_IE)? 1: 0; /* CSTB INTR <- IE */ | |
massbus[mb].cs1 = (massbus[mb].cs1 & ~(clr | CS1_MCPE | CS1_MBZ | CS1_DRV)) | set; | |
if (massbus[mb].cs2 & CS2_ERR) | |
massbus[mb].cs1 = massbus[mb].cs1 | CS1_TRE | CS1_SC; | |
else if (massbus[mb].cs1 & CS1_TRE) | |
massbus[mb].cs1 = massbus[mb].cs1 | CS1_SC; | |
if (massbus[mb].iff || | |
((massbus[mb].cs1 & CS1_SC) && | |
(massbus[mb].cs1 & CS1_DONE) && | |
(massbus[mb].cs1 & CS1_IE))) | |
mba_set_int (mb); | |
else mba_clr_int (mb); | |
return; | |
} | |
void mba_set_cs2 (uint32 flag, uint32 mb) | |
{ | |
if (mb >= MBA_NUM) | |
return; | |
massbus[mb].cs2 = massbus[mb].cs2 | flag; | |
mba_upd_cs1 (0, 0, mb); | |
return; | |
} | |
/* Interrupt acknowledge */ | |
int32 mba0_inta (void) | |
{ | |
massbus[0].cs1 &= ~CS1_IE; /* clear int enable */ | |
massbus[0].cs3 &= ~CS1_IE; /* in both registers */ | |
massbus[0].iff = 0; /* clear CSTB INTR */ | |
return mba0_dib.vec; /* acknowledge */ | |
} | |
int32 mba1_inta (void) | |
{ | |
massbus[1].cs1 &= ~CS1_IE; /* clear int enable */ | |
massbus[1].cs3 &= ~CS1_IE; /* in both registers */ | |
massbus[1].iff = 0; /* clear CSTB INTR */ | |
return mba1_dib.vec; /* acknowledge */ | |
} | |
int32 mba2_inta (void) | |
{ | |
massbus[2].cs1 &= ~CS1_IE; /* clear int enable */ | |
massbus[2].cs3 &= ~CS1_IE; /* in both registers */ | |
massbus[2].iff = 0; /* clear CSTB INTR */ | |
return mba2_dib.vec; /* acknowledge */ | |
} | |
/* Map physical address to Massbus number, offset */ | |
int32 mba_map_pa (int32 pa, int32 *ofs) | |
{ | |
int32 i, uo, ba, lnt; | |
DIB *dibp; | |
for (i = 0; i < MBA_NUM; i++) { /* loop thru ctrls */ | |
dibp = (DIB *) mba_dev[i].ctxt; /* get DIB */ | |
ba = dibp->ba; | |
lnt = dibp->lnt; | |
if ((pa >= ba) && /* in range? */ | |
(pa < (ba + lnt))) { | |
if (pa < (ba + (lnt - 4))) { /* not last two? */ | |
uo = ((pa - ba) & MBA_OFSMASK) >> 1; /* get Unibus offset */ | |
*ofs = mba_mapofs[uo]; /* map thru PROM */ | |
return i; /* return ctrl idx */ | |
} | |
else if (RH11) /* RH11? done */ | |
return -1; | |
else { /* RH70 */ | |
uo = (pa - (ba + (lnt - 4))) >> 1; /* offset relative */ | |
*ofs = BAE_OF + uo; /* to BAE */ | |
return i; | |
} | |
} | |
} | |
return -1; | |
} | |
/* Reset Massbus adapter */ | |
t_stat mba_reset (DEVICE *dptr) | |
{ | |
uint32 mb; | |
mb = dptr - mba_dev; | |
if (mb >= MBA_NUM) | |
return SCPE_NOFNC; | |
massbus[mb].cs1 = CS1_DONE; | |
massbus[mb].wc = 0; | |
massbus[mb].ba = 0; | |
massbus[mb].cs2 = 0; | |
massbus[mb].db = 0; | |
massbus[mb].bae= 0; | |
massbus[mb].cs3 = 0; | |
massbus[mb].iff = 0; | |
mba_clr_int (mb); | |
if (mbabort[mb]) | |
mbabort[mb] (); | |
return build_dib_tab(); | |
} | |
/* Enable/disable Massbus adapter */ | |
void mba_set_enbdis (DEVICE *dptr) | |
{ | |
DIB *dibp = (DIB *)dptr->ctxt; | |
if (((dptr->flags & DEV_DIS) && /* Already Disabled */ | |
(dibp->ba == MBA_AUTO)) || /* OR */ | |
(!(dptr->flags & DEV_DIS) && /* Already Enabled */ | |
(dibp->ba != MBA_AUTO))) | |
return; | |
if (dptr->flags & DEV_DIS) { /* Disabling? */ | |
uint32 mb = dibp->ba; | |
dibp->ba = MBA_AUTO; /* Flag unassigned */ | |
dibp->ulnt = dibp->lnt = 0; | |
mba_reset (&mba_dev[mb]); /* reset prior MBA */ | |
} | |
build_dib_tab(); | |
if (!(dptr->flags & DEV_DIS)) /* Enabling? */ | |
mba_reset (&mba_dev[dibp->ba]); /* reset new MBA */ | |
} | |
/* Show Massbus adapter number */ | |
t_stat mba_show_num (FILE *st, UNIT *uptr, int32 val, CONST void *desc) | |
{ | |
DEVICE *dptr = find_dev_from_unit (uptr); | |
DIB *dibp; | |
if (dptr == NULL) | |
return SCPE_IERR; | |
dibp = (DIB *) dptr->ctxt; | |
if (dibp == NULL) | |
return SCPE_IERR; | |
fprintf (st, "Massbus adapter %d (RH%c)", dibp->ba, 'A' + dibp->ba); | |
return SCPE_OK; | |
} | |
/* Init Mbus tables */ | |
void init_mbus_tab (void) | |
{ | |
uint32 i; | |
int mba_devs; | |
for (i = 0; i < MBA_NUM; i++) { | |
mbregR[i] = NULL; | |
mbregW[i] = NULL; | |
mbabort[i] = NULL; | |
mba_dev[i].flags |= DEV_DIS; | |
} | |
for (i = mba_devs = 0; sim_devices[i] != NULL; i++) { | |
if ((sim_devices[i]->flags & DEV_MBUS) && | |
(!(sim_devices[i]->flags & DEV_DIS))) { | |
mba_dev[mba_devs].flags &= ~DEV_DIS; | |
mba_devs++; | |
} | |
} | |
mba_active = 0; | |
} | |
/* Build dispatch tables */ | |
t_stat build_mbus_tab (DEVICE *dptr, DIB *dibp) | |
{ | |
uint32 idx; | |
if ((dptr == NULL) || (dibp == NULL)) /* validate args */ | |
return SCPE_IERR; | |
idx = mba_active++; | |
dibp->ba = idx; /* Mbus # */ | |
if (idx >= MBA_NUM) | |
return SCPE_STOP; | |
if ((mbregR[idx] && dibp->rd && /* conflict? */ | |
(mbregR[idx] != dibp->rd)) || | |
(mbregW[idx] && dibp->wr && | |
(mbregW[idx] != dibp->wr)) || | |
(mbabort[idx] && dibp->ack[0] && | |
(mbabort[idx] != dibp->ack[0]))) { | |
sim_printf ("Massbus %s assignment conflict at %d\n", | |
sim_dname (dptr), dibp->ba); | |
return SCPE_STOP; | |
} | |
mbregR[idx] = dibp->rd; /* set rd dispatch */ | |
mbregW[idx] = dibp->wr; /* set wr dispatch */ | |
mbabort[idx] = dibp->ack[0]; /* set abort dispatch */ | |
mba_dev[idx].flags &= ~DEV_DIS; /* mark MBA enabled */ | |
((DIB *)mba_dev[idx].ctxt)->lnt = dibp->lnt; | |
((DIB *)mba_dev[idx].ctxt)->ulnt = dibp->lnt; | |
return build_ubus_tab (&mba_dev[idx], (DIB *)mba_dev[idx].ctxt); | |
} | |
void fixup_mbus_tab (void) | |
{ | |
uint32 idx, idy, active; | |
DEVICE *dptr; | |
DIB *dibp; | |
static const char *mbus_devs[MBA_NUM+1] = {"RP", "TU", "RS", NULL}; | |
for (idx = active = 0; idx < MBA_NUM; idx++) { | |
dptr = find_dev (mbus_devs[idx]); | |
if (!dptr) | |
break; | |
if (dptr->flags & DEV_DIS) | |
continue; | |
dibp = (DIB *)dptr->ctxt; | |
if (dibp->ba != active) { | |
t_stat (*TmbregR)(int32 *dat, int32 ad, int32 md) = mbregR[active]; | |
t_stat (*TmbregW)(int32 dat, int32 ad, int32 md) = mbregW[active]; | |
int32 (*Tmbabort)(void) = mbabort[active]; | |
mbregR[active] = mbregR[dibp->ba]; | |
mbregW[active] = mbregW[dibp->ba]; | |
mbabort[active] = mbabort[dibp->ba];; | |
mbregR[dibp->ba] = TmbregR; | |
mbregW[dibp->ba] = TmbregW; | |
mbabort[dibp->ba] = Tmbabort;; | |
for (idy = 1; idy < MBA_NUM; idy++) { | |
DEVICE *ydptr = find_dev (mbus_devs[idy]); | |
DIB *ydibp = (DIB *)ydptr->ctxt; | |
if (ydibp->ba != active) | |
continue; | |
ydibp->ba = dibp->ba; | |
dibp->ba = active; | |
break; | |
} | |
} | |
((DIB *)mba_dev[dibp->ba].ctxt)->lnt = dibp->lnt; | |
((DIB *)mba_dev[dibp->ba].ctxt)->ulnt = dibp->ulnt; | |
++active; | |
} | |
} | |
t_stat rh_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr) | |
{ | |
const char *const text = | |
/*567901234567890123456789012345678901234567890123456789012345678901234567890*/ | |
" RH70/RH11 Massbus adapters (RHA, RHB, RHC)\n" | |
"\n" | |
" The RH70/RH11 Massbus adapters interface Massbus peripherals to the\n" | |
" memory bus or Unibus of the CPU. The simulator provides three Massbus\n" | |
" adapters. These adapters (RHA, RHB, and RHC) are used by (in order):\n" | |
" 1) the RP family of disk drives.\n" | |
" 2) the TU family of tape controllers.\n" | |
" 3) the RS family of fixed head disks.\n" | |
" Depending on which of the RP, TU, and RS devices are enabled, will\n" | |
" determine which adapter is assigned to which device.\n" | |
" In a Unibus system, the RH adapters implement 22b addressing for the\n" | |
" 11/70 and 18b addressing for all other models. In a Qbus system, the\n" | |
" RH adapters always implement 22b addressing.\n" | |
/*567901234567890123456789012345678901234567890123456789012345678901234567890*/ | |
"\n"; | |
fprintf (st, "%s", text); | |
fprint_show_help (st, dptr); | |
fprintf (st, "\nEach RH adapter implements these registers:\n"); | |
fprint_reg_help (st, dptr); | |
return SCPE_OK; | |
} | |
const char *rh_description (DEVICE *dptr) | |
{ | |
static char buf[64]; | |
uint32 mb = dptr - mba_dev; | |
if (dptr->flags & DEV_DIS) | |
dptr = NULL; | |
else { | |
int i; | |
for (i = 0; (dptr = sim_devices[i]) != NULL; i++) { /* loop thru devs */ | |
if (!(dptr->flags & DEV_DIS) && | |
(dptr->flags & DEV_MBUS) && | |
((DIB *)dptr->ctxt)->ba == mb) | |
break; | |
} | |
} | |
sprintf (buf, "RH70/RH11 Massbus adapter%s%s%s", | |
dptr ? " (for " : "", dptr ? dptr->name : "", dptr ? ")" : ""); | |
return buf; | |
} |