Rivoreo Source Code Repositories
src.rivoreo.one / emulators / simh / 7e1840eb5f218527f5a09562a306485c424ecff8 / . / VAX / vax630_sysdev.c
blob: 3aa3a0ddbeaaec051bc7a8e1bc1cc22887fab54e [file] [log] [blame] [raw]
/* vax630_sysdev.c: MicroVAX II system-specific logic
Copyright (c) 2009-2012, Matt Burke
This module incorporates code from SimH, Copyright (c) 1998-2008, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name(s) of the author(s) shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from the author(s).
This module contains the MicroVAX II system-specific registers and devices.
rom bootstrap ROM (no registers)
nvr non-volatile ROM (no registers)
sysd system devices
08-Nov-2012 MB First version
*/
#include "vax_defs.h"
#include <time.h>
#ifdef DONT_USE_INTERNAL_ROM
#if defined(VAX_620)
#define BOOT_CODE_FILENAME "ka620.bin"
#else
#define BOOT_CODE_FILENAME "ka320.bin"
#endif
#else /* !DONT_USE_INTERNAL_ROM */
#if defined(VAX_620)
#include "vax_ka620_bin.h" /* Defines BOOT_CODE_FILENAME and BOOT_CODE_ARRAY, etc */
#else
#include "vax_ka630_bin.h" /* Defines BOOT_CODE_FILENAME and BOOT_CODE_ARRAY, etc */
#endif
#endif /* DONT_USE_INTERNAL_ROM */
#define UNIT_V_NODELAY (UNIT_V_UF + 0) /* ROM access equal to RAM access */
#define UNIT_NODELAY (1u << UNIT_V_NODELAY)
extern CTAB *sim_vm_cmd;
t_stat vax630_boot (int32 flag, char *ptr);
/* Special boot command, overrides regular boot */
CTAB vax630_cmd[] = {
{ "BOOT", &vax630_boot, RU_BOOT,
"bo{ot} boot simulator\n", &run_cmd_message },
{ NULL }
};
/* KA630 boot/diagnostic register */
#define BDR_DISP 0x0000000F /* LED display */
#define BDR_V_BDC 8 /* boot/diag code */
#define BDR_M_BDC 0x3
#define BDR_BDC (BDR_M_BDC << BDR_V_BDC)
#define BDR_V_CPUC 11 /* cpu code */
#define BDR_M_CPUC 0x3
#define BDR_CPUC (BDR_M_CPUC << BDR_V_CPUC)
#define BDR_BRKENB 0x00004000 /* break enable */
#define BDR_POK 0x00008000 /* power ok */
#define BDR_RD (BDR_DISP | BDR_BDC | BDR_CPUC | BDR_BRKENB | BDR_POK)
#define BDR_WR (BDR_DISP)
/* BDR boot/diagnostic codes */
#define BDC_NORM 0x0 /* normal startup */
#define BDC_LNGI 0x1 /* language inquiry */
#define BDC_TSTL 0x2 /* test loop */
#define BDC_SKPM 0x3 /* skip mem test */
/* BDR CPU codes */
#define CPUC_ARB 0x0 /* arbiter */
#define CPUC_AUX1 0x1 /* auxiliary 1 */
#define CPUC_AUX2 0x2 /* auxiliary 2 */
#define CPUC_AUX3 0x3 /* auxiliary 3 */
/* KA630 Memory system error register */
#define MSER_PE 0x00000001 /* Parity Enable */
#define MSER_WWP 0x00000002 /* Write Wrong Parity */
#define MSER_LEB 0x00000008 /* Lost Error Bit */
#define MSER_DQPE 0x00000010 /* DMA Q22 Parity Err */
#define MSER_CQPE 0x00000020 /* CPU Q22 Parity Err */
#define MSER_CLPE 0x00000040 /* CPU Mem Parity Err */
#define MSER_NXM 0x00000080 /* CPU NXM */
#define MSER_MCD0 0x00000100 /* Mem Code 0 */
#define MSER_MCD1 0x00000200 /* Mem Code 1 */
#define MSER_MBZ 0xFFFFFC04
#define MSER_RD (MSER_PE | MSER_WWP | MSER_LEB | \
MSER_DQPE | MSER_CQPE | MSER_CLPE | \
MSER_NXM | MSER_MCD0 | MSER_MCD1)
#define MSER_WR (MSER_PE | MSER_WWP)
#define MSER_RS (MSER_LEB | MSER_DQPE | MSER_CQPE | MSER_CLPE | MSER_NXM)
/* KA630 CPU error address reg */
#define CEAR_LMADD 0x00007FFF /* local mem addr */
#define CEAR_RD (CEAR_LMADD)
/* KA630 DMA error address reg */
#define DEAR_LMADD 0x00007FFF /* local mem addr */
#define DEAR_RD (DEAR_LMADD)
extern int32 R[16];
extern int32 STK[5];
extern int32 PSL;
extern int32 SISR;
extern int32 SCBB;
extern int32 mapen;
extern int32 pcq[PCQ_SIZE];
extern int32 pcq_p;
extern int32 ibcnt, ppc;
extern int32 in_ie;
extern int32 mchk_va, mchk_ref;
extern int32 fault_PC;
extern int32 int_req[IPL_HLVL];
extern UNIT cpu_unit;
extern UNIT clk_unit;
extern jmp_buf save_env;
extern int32 p1;
extern int32 sim_switches;
extern int32 tmr_poll;
uint32 *rom = NULL; /* boot ROM */
uint32 *nvr = NULL; /* non-volatile mem */
int32 conisp, conpc, conpsl; /* console reg */
int32 ka_bdr = BDR_BRKENB; /* KA630 boot diag */
int32 ka_mser = 0; /* KA630 mem sys err */
int32 ka_cear = 0; /* KA630 cpu err */
int32 ka_dear = 0; /* KA630 dma err */
static uint32 rom_delay = 0;
t_bool rom_diag_full = 0;
t_stat rom_ex (t_value *vptr, t_addr exta, UNIT *uptr, int32 sw);
t_stat rom_dep (t_value val, t_addr exta, UNIT *uptr, int32 sw);
t_stat rom_reset (DEVICE *dptr);
t_stat rom_set_diag (UNIT *uptr, int32 val, char *cptr, void *desc);
t_stat rom_show_diag (FILE *st, UNIT *uptr, int32 val, void *desc);
t_stat nvr_ex (t_value *vptr, t_addr exta, UNIT *uptr, int32 sw);
t_stat nvr_dep (t_value val, t_addr exta, UNIT *uptr, int32 sw);
t_stat nvr_reset (DEVICE *dptr);
t_stat nvr_attach (UNIT *uptr, char *cptr);
t_stat nvr_detach (UNIT *uptr);
t_stat sysd_reset (DEVICE *dptr);
int32 rom_rd (int32 pa);
int32 nvr_rd (int32 pa);
void nvr_wr (int32 pa, int32 val, int32 lnt);
int32 ka_rd (int32 pa);
void ka_wr (int32 pa, int32 val, int32 lnt);
t_stat sysd_powerup (void);
int32 con_halt (int32 code, int32 cc);
extern int32 intexc (int32 vec, int32 cc, int32 ipl, int ei);
extern int32 qbmap_rd (int32 pa);
extern void qbmap_wr (int32 pa, int32 val, int32 lnt);
extern int32 qbmem_rd (int32 pa);
extern void qbmem_wr (int32 pa, int32 val, int32 lnt);
extern int32 wtc_rd (int32 pa);
extern void wtc_wr (int32 pa, int32 val, int32 lnt);
extern void wtc_set_valid (void);
extern void wtc_set_invalid (void);
extern int32 iccs_rd (void);
extern int32 todr_rd (void);
extern int32 rxcs_rd (void);
extern int32 rxdb_rd (void);
extern int32 txcs_rd (void);
extern void iccs_wr (int32 dat);
extern void todr_wr (int32 dat);
extern void rxcs_wr (int32 dat);
extern void txcs_wr (int32 dat);
extern void txdb_wr (int32 dat);
extern void ioreset_wr (int32 dat);
extern uint32 sim_os_msec();
/* ROM data structures
rom_dev ROM device descriptor
rom_unit ROM units
rom_reg ROM register list
*/
UNIT rom_unit = { UDATA (NULL, UNIT_FIX+UNIT_BINK, ROMSIZE) };
REG rom_reg[] = {
{ NULL }
};
MTAB rom_mod[] = {
{ UNIT_NODELAY, UNIT_NODELAY, "fast access", "NODELAY", NULL },
{ UNIT_NODELAY, 0, "1usec calibrated access", "DELAY", NULL },
{ MTAB_XTD|MTAB_VDV, 0, "DIAG", "DIAG={FULL|MIN}", &rom_set_diag, &rom_show_diag },
{ 0 }
};
DEVICE rom_dev = {
"ROM", &rom_unit, rom_reg, rom_mod,
1, 16, ROMAWIDTH, 4, 16, 32,
&rom_ex, &rom_dep, &rom_reset,
NULL, NULL, NULL,
NULL, 0
};
/* NVR data structures
nvr_dev NVR device descriptor
nvr_unit NVR units
nvr_reg NVR register list
*/
UNIT nvr_unit =
{ UDATA (NULL, UNIT_FIX+UNIT_BINK, NVRSIZE) };
REG nvr_reg[] = {
{ NULL }
};
DEVICE nvr_dev = {
"NVR", &nvr_unit, nvr_reg, NULL,
1, 16, NVRAWIDTH, 4, 16, 32,
&nvr_ex, &nvr_dep, &nvr_reset,
NULL, &nvr_attach, &nvr_detach,
NULL, 0
};
/* SYSD data structures
sysd_dev SYSD device descriptor
sysd_unit SYSD units
sysd_reg SYSD register list
*/
UNIT sysd_unit = { UDATA (NULL, 0, 0) };
REG sysd_reg[] = {
{ HRDATA (CONISP, conisp, 32) },
{ HRDATA (CONPC, conpc, 32) },
{ HRDATA (CONPSL, conpsl, 32) },
{ HRDATA (BDR, ka_bdr, 16) },
{ HRDATA (MSER, ka_mser, 8) },
{ HRDATA (CEAR, ka_cear, 8) },
{ HRDATA (DEAR, ka_dear, 8) },
{ NULL }
};
DEVICE sysd_dev = {
"SYSD", &sysd_unit, sysd_reg, NULL,
1, 16, 16, 1, 16, 8,
NULL, NULL, &sysd_reset,
NULL, NULL, NULL,
NULL, 0
};
/* ROM: read only memory - stored in a buffered file
Register space access routines see ROM twice
ROM access has been 'regulated' to about 1Mhz to avoid issues
with testing the interval timers in self-test. Specifically,
the VAX boot ROM (ka630.bin) contains code which presumes that
the VAX runs at a particular slower speed when code is running
from ROM (which is not cached). These assumptions are built
into instruction based timing loops. As the host platform gets
much faster than the original VAX, the assumptions embedded in
these code loops are no longer valid.
Code has been added to the ROM implementation to limit CPU speed
to about 500K instructions per second. This heads off any future
issues with the embedded timing loops.
*/
int32 rom_swapb(int32 val)
{
return ((val << 24) & 0xff000000) | (( val << 8) & 0xff0000) |
((val >> 8) & 0xff00) | ((val >> 24) & 0xff);
}
int32 rom_read_delay (int32 val)
{
uint32 i, l = rom_delay;
int32 loopval = 0;
if (rom_unit.flags & UNIT_NODELAY)
return val;
/* Calibrate the loop delay factor when first used.
Do this 4 times to and use the largest value computed. */
if (rom_delay == 0) {
uint32 ts, te, c = 10000, samples = 0;
while (1) {
c = c * 2;
te = sim_os_msec();
while (te == (ts = sim_os_msec ())); /* align on ms tick */
/* This is merely a busy wait with some "work" that won't get optimized
away by a good compiler. loopval always is zero. To avoid smart compilers,
the loopval variable is referenced in the function arguments so that the
function expression is not loop invariant. It also must be referenced
by subsequent code or to avoid the whole computation being eliminated. */
for (i = 0; i < c; i++)
loopval |= (loopval + ts) ^ rom_swapb (rom_swapb (loopval + ts));
te = sim_os_msec ();
if ((te - ts) < 50) /* sample big enough? */
continue;
if (rom_delay < (loopval + (c / (te - ts) / 1000) + 1))
rom_delay = loopval + (c / (te - ts) / 1000) + 1;
if (++samples >= 4)
break;
c = c / 2;
}
if (rom_delay < 5)
rom_delay = 5;
}
for (i = 0; i < l; i++)
loopval |= (loopval + val) ^ rom_swapb (rom_swapb (loopval + val));
return val + loopval;
}
int32 rom_rd (int32 pa)
{
int32 rg = ((pa - ROMBASE) & ROMAMASK) >> 2;
return rom_read_delay (rom[rg]);
}
void rom_wr_B (int32 pa, int32 val)
{
int32 rg = ((pa - ROMBASE) & ROMAMASK) >> 2;
int32 sc = (pa & 3) << 3;
rom[rg] = ((val & 0xFF) << sc) | (rom[rg] & ~(0xFF << sc));
return;
}
/* ROM examine */
t_stat rom_ex (t_value *vptr, t_addr exta, UNIT *uptr, int32 sw)
{
uint32 addr = (uint32) exta;
if ((vptr == NULL) || (addr & 03))
return SCPE_ARG;
if (addr >= ROMSIZE)
return SCPE_NXM;
*vptr = rom[addr >> 2];
return SCPE_OK;
}
/* ROM deposit */
t_stat rom_dep (t_value val, t_addr exta, UNIT *uptr, int32 sw)
{
uint32 addr = (uint32) exta;
if (addr & 03)
return SCPE_ARG;
if (addr >= ROMSIZE)
return SCPE_NXM;
rom[addr >> 2] = (uint32) val;
return SCPE_OK;
}
/* ROM reset */
t_stat rom_reset (DEVICE *dptr)
{
if (rom == NULL)
rom = (uint32 *) calloc (ROMSIZE >> 2, sizeof (uint32));
if (rom == NULL)
return SCPE_MEM;
return SCPE_OK;
}
/* NVR: non-volatile RAM - stored in a buffered file */
int32 nvr_rd (int32 pa)
{
int32 rg = (pa - NVRBASE) >> 2;
if (rg < 7) /* watch chip */
return wtc_rd (pa);
else
return nvr[rg];
}
void nvr_wr (int32 pa, int32 val, int32 lnt)
{
int32 rg = (pa - NVRBASE) >> 2;
if (rg < 7) /* watch chip */
wtc_wr (pa, val, lnt);
else {
int32 sc = (pa & 3) << 3; /* merge */
int32 mask = 0xFF;
nvr[rg] = ((val & mask) << sc) | (nvr[rg] & ~(mask << sc));
}
}
/* NVR examine */
t_stat nvr_ex (t_value *vptr, t_addr exta, UNIT *uptr, int32 sw)
{
uint32 addr = (uint32) exta;
if ((vptr == NULL) || (addr & 03))
return SCPE_ARG;
if (addr >= NVRSIZE)
return SCPE_NXM;
*vptr = nvr[addr >> 2];
return SCPE_OK;
}
/* NVR deposit */
t_stat nvr_dep (t_value val, t_addr exta, UNIT *uptr, int32 sw)
{
uint32 addr = (uint32) exta;
if (addr & 03)
return SCPE_ARG;
if (addr >= NVRSIZE)
return SCPE_NXM;
nvr[addr >> 2] = (uint32) val;
return SCPE_OK;
}
/* NVR reset */
t_stat nvr_reset (DEVICE *dptr)
{
if (nvr == NULL) {
nvr = (uint32 *) calloc (NVRSIZE >> 2, sizeof (uint32));
nvr_unit.filebuf = nvr;
}
if (nvr == NULL)
return SCPE_MEM;
return SCPE_OK;
}
/* NVR attach */
t_stat nvr_attach (UNIT *uptr, char *cptr)
{
t_stat r;
uptr->flags = uptr->flags | (UNIT_ATTABLE | UNIT_BUFABLE);
r = attach_unit (uptr, cptr);
if (r != SCPE_OK)
uptr->flags = uptr->flags & ~(UNIT_ATTABLE | UNIT_BUFABLE);
else {
uptr->hwmark = (uint32) uptr->capac;
wtc_set_valid ();
}
return r;
}
/* NVR detach */
t_stat nvr_detach (UNIT *uptr)
{
t_stat r;
r = detach_unit (uptr);
if ((uptr->flags & UNIT_ATT) == 0) {
uptr->flags = uptr->flags & ~(UNIT_ATTABLE | UNIT_BUFABLE);
wtc_set_invalid ();
}
return r;
}
/* Read KA630 specific IPR's */
int32 ReadIPR (int32 rg)
{
int32 val;
switch (rg) {
case MT_ICCS: /* ICCS */
val = iccs_rd ();
break;
case MT_RXCS: /* RXCS */
val = rxcs_rd ();
break;
case MT_RXDB: /* RXDB */
val = rxdb_rd ();
break;
case MT_TXCS: /* TXCS */
val = txcs_rd ();
break;
case MT_TXDB: /* TXDB */
val = 0;
break;
case MT_CONISP: /* console ISP */
val = conisp;
break;
case MT_CONPC: /* console PC */
val = conpc;
break;
case MT_CONPSL: /* console PSL */
val = conpsl;
break;
case MT_SID: /* SID */
#if defined(VAX_620)
val = VAX620_SID;
#else
val = VAX630_SID;
#endif
break;
case MT_NICR: /* NICR */
case MT_ICR: /* ICR */
case MT_TODR: /* TODR */
case MT_CSRS: /* CSRS */
case MT_CSRD: /* CSRD */
case MT_CSTS: /* CSTS */
case MT_CSTD: /* CSTD */
case MT_TBDR: /* TBDR */
case MT_CADR: /* CADR */
case MT_MCESR: /* MCESR */
case MT_CAER: /* CAER */
case MT_SBIFS: /* SBIFS */
case MT_SBIS: /* SBIS */
case MT_SBISC: /* SBISC */
case MT_SBIMT: /* SBIMT */
case MT_SBIER: /* SBIER */
case MT_SBITA: /* SBITA */
case MT_SBIQC: /* SBIQC */
case MT_TBDATA: /* TBDATA */
case MT_MBRK: /* MBRK */
case MT_PME: /* PME */
val = 0;
break;
default:
RSVD_OPND_FAULT;
}
return val;
}
/* Write KA630 specific IPR's */
void WriteIPR (int32 rg, int32 val)
{
switch (rg) {
case MT_ICCS: /* ICCS */
iccs_wr (val);
break;
case MT_RXCS: /* RXCS */
rxcs_wr (val);
break;
case MT_RXDB: /* RXDB */
break;
case MT_TXCS: /* TXCS */
txcs_wr (val);
break;
case MT_TXDB: /* TXDB */
txdb_wr (val);
break;
case MT_IORESET: /* IORESET */
ioreset_wr (val);
break;
case MT_SID:
case MT_CONISP:
case MT_CONPC:
case MT_CONPSL: /* halt reg */
RSVD_OPND_FAULT;
case MT_NICR: /* NICR */
case MT_ICR: /* ICR */
case MT_TODR: /* TODR */
case MT_CSRS: /* CSRS */
case MT_CSRD: /* CSRD */
case MT_CSTS: /* CSTS */
case MT_CSTD: /* CSTD */
case MT_TBDR: /* TBDR */
case MT_CADR: /* CADR */
case MT_MCESR: /* MCESR */
case MT_CAER: /* CAER */
case MT_SBIFS: /* SBIFS */
case MT_SBIS: /* SBIS */
case MT_SBISC: /* SBISC */
case MT_SBIMT: /* SBIMT */
case MT_SBIER: /* SBIER */
case MT_SBITA: /* SBITA */
case MT_SBIQC: /* SBIQC */
case MT_TBDATA: /* TBDATA */
case MT_MBRK: /* MBRK */
case MT_PME: /* PME */
break;
default:
RSVD_OPND_FAULT;
}
return;
}
/* Read/write I/O register space
These routines are the 'catch all' for address space map. Any
address that doesn't explicitly belong to memory, I/O, or ROM
is given to these routines for processing.
*/
struct reglink { /* register linkage */
uint32 low; /* low addr */
uint32 high; /* high addr */
int32 (*read)(int32 pa); /* read routine */
void (*write)(int32 pa, int32 val, int32 lnt); /* write routine */
};
struct reglink regtable[] = {
{ QBMAPBASE, QBMAPBASE+QBMAPSIZE, &qbmap_rd, &qbmap_wr },
{ ROMBASE, ROMBASE+ROMSIZE+ROMSIZE, &rom_rd, NULL },
{ NVRBASE, NVRBASE+NVRSIZE, &nvr_rd, &nvr_wr },
{ KABASE, KABASE+KASIZE, &ka_rd, &ka_wr },
/* { QVMBASE, QVMBASE+QVMSIZE, &qv_mem_rd, &qv_mem_wr }, */
{ QBMBASE, QBMBASE+QBMSIZE, &qbmem_rd, &qbmem_wr },
{ 0, 0, NULL, NULL }
};
/* ReadReg - read register space
Inputs:
pa = physical address
lnt = length (BWLQ) - ignored
Output:
longword of data
*/
int32 ReadReg (uint32 pa, int32 lnt)
{
struct reglink *p;
for (p = &regtable[0]; p->low != 0; p++) {
if ((pa >= p->low) && (pa < p->high) && p->read)
return p->read (pa);
}
MACH_CHECK (MCHK_READ);
}
/* WriteReg - write register space
Inputs:
pa = physical address
val = data to write, right justified in 32b longword
lnt = length (BWLQ)
Outputs:
none
*/
void WriteReg (uint32 pa, int32 val, int32 lnt)
{
struct reglink *p;
for (p = &regtable[0]; p->low != 0; p++) {
if ((pa >= p->low) && (pa < p->high) && p->write) {
p->write (pa, val, lnt);
return;
}
}
MACH_CHECK (MCHK_WRITE);
}
/* KA630 registers */
int32 ka_rd (int32 pa)
{
int32 rg = (pa - KABASE) >> 2;
switch (rg) {
case 0: /* BDR */
return ka_bdr & BDR_RD;
case 1: /* MSER */
return ka_mser & MSER_RD;
case 2: /* CEAR */
return ka_cear & CEAR_RD;
case 3: /* DEAR */
return ka_dear & DEAR_RD;
}
return 0;
}
void ka_wr (int32 pa, int32 val, int32 lnt)
{
int32 rg = (pa - KABASE) >> 2;
switch (rg) {
case 0: /* BDR */
ka_bdr = (ka_bdr & ~BDR_WR) | (val & BDR_WR);
break;
case 1: /* MSER */
ka_mser = (ka_mser & ~MSER_WR) | (val & MSER_WR);
ka_mser = ka_mser & ~(val & MSER_RS);
break;
case 2: /* CEAR */
case 3: /* DEAR */
break;
}
return;
}
int32 sysd_hlt_enb (void)
{
return ka_bdr & BDR_BRKENB;
}
/* Machine check */
int32 machine_check (int32 p1, int32 opc, int32 cc, int32 delta)
{
int32 st, p2, acc;
if (in_ie) {
in_ie = 0;
return con_halt(CON_DBLMCK, cc); /* double machine check */
}
if (p1 & 0x80) /* mref? set v/p */
p1 = p1 + mchk_ref;
p2 = mchk_va + 4; /* save vap */
st = 0;
if (p1 & 0x80) { /* mref? */
cc = intexc (SCB_MCHK, cc, 0, IE_EXC); /* take normal exception */
if (!(ka_mser & MSER_CQPE) && !(ka_mser & MSER_CLPE))
ka_mser |= MSER_NXM;
}
else cc = intexc (SCB_MCHK, cc, 0, IE_SVE); /* take severe exception */
acc = ACC_MASK (KERN); /* in kernel mode */
in_ie = 1;
SP = SP - 16; /* push 4 words */
Write (SP, 12, L_LONG, WA); /* # bytes */
Write (SP + 4, p1, L_LONG, WA); /* mcheck type */
Write (SP + 8, p2, L_LONG, WA); /* address */
Write (SP + 12, st, L_LONG, WA); /* state */
in_ie = 0;
return cc;
}
/* Console entry */
int32 con_halt (int32 code, int32 cc)
{
int32 temp;
conisp = IS; /* save ISP */
conpc = PC; /* save PC */
conpsl = ((PSL | cc) & 0xFFFF00FF) | code; /* PSL, param */
temp = (PSL >> PSL_V_CUR) & 0x7; /* get is'cur */
if (temp > 4) /* invalid? */
conpsl = conpsl | CON_BADPSL;
else STK[temp] = SP; /* save stack */
if (mapen) /* mapping on? */
conpsl = conpsl | CON_MAPON;
mapen = 0; /* turn off map */
SP = IS; /* set SP from IS */
PSL = PSL_IS | PSL_IPL1F; /* PSL = 41F0000 */
JUMP (ROMBASE); /* PC = 20040000 */
return 0; /* new cc = 0 */
}
/* Special boot command - linked into SCP by initial reset
Syntax: BOOT {CPU}
*/
t_stat vax630_boot (int32 flag, char *ptr)
{
char gbuf[CBUFSIZE];
get_glyph (ptr, gbuf, 0); /* get glyph */
if (gbuf[0] && strcmp (gbuf, "CPU"))
return SCPE_ARG; /* Only can specify CPU device */
return run_cmd (flag, "CPU");
}
/* Bootstrap */
t_stat cpu_boot (int32 unitno, DEVICE *dptr)
{
extern t_stat load_cmd (int32 flag, char *cptr);
t_stat r;
PC = ROMBASE;
PSL = PSL_IS | PSL_IPL1F;
conisp = 0;
conpc = 0;
conpsl = PSL_IS | PSL_IPL1F | CON_PWRUP;
if (rom == NULL)
return SCPE_IERR;
if (*rom == 0) { /* no boot? */
r = cpu_load_bootcode (BOOT_CODE_FILENAME, BOOT_CODE_ARRAY, BOOT_CODE_SIZE, TRUE, 0);
if (r != SCPE_OK)
return r;
}
return SCPE_OK;
}
t_stat rom_set_diag (UNIT *uptr, int32 val, char *cptr, void *desc)
{
if (cptr != NULL) rom_diag_full = strcmp(cptr, "MIN");
return SCPE_OK;
}
t_stat rom_show_diag (FILE *st, UNIT *uptr, int32 val, void *desc)
{
fprintf(st, "diag=%s", (rom_diag_full ? "full" :"min"));
return SCPE_OK;
}
/* SYSD reset */
t_stat sysd_reset (DEVICE *dptr)
{
if (sim_switches & SWMASK ('P')) sysd_powerup (); /* powerup? */
ka_bdr = (BDR_POK | \
((rom_diag_full ? BDC_NORM : BDC_SKPM) << BDR_V_BDC) | \
(CPUC_ARB << BDR_V_CPUC) | \
BDR_BRKENB | \
0xF);
ka_mser = 0;
ka_cear = 0;
ka_dear = 0;
sim_vm_cmd = vax630_cmd;
return SCPE_OK;
}
/* SYSD powerup */
t_stat sysd_powerup (void)
{
rom_diag_full = 0;
return SCPE_OK;
}
t_stat cpu_show_model (FILE *st, UNIT *uptr, int32 val, void *desc)
{
#if defined(VAX_620)
fprintf (st, "model=rtVAX 1000");
#else
fprintf (st, "model=MicroVAX II");
#endif
return SCPE_OK;
}