/* sds_io.c: SDS 940 I/O simulator | |
Copyright (c) 2001-2012, Robert M. Supnik | |
Permission is hereby granted, free of charge, to any person obtaining a | |
copy of this software and associated documentation files (the "Software"), | |
to deal in the Software without restriction, including without limitation | |
the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
and/or sell copies of the Software, and to permit persons to whom the | |
Software is furnished to do so, subject to the following conditions: | |
The above copyright notice and this permission notice shall be included in | |
all copies or substantial portions of the Software. | |
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
Except as contained in this notice, the name of Robert M Supnik shall not be | |
used in advertising or otherwise to promote the sale, use or other dealings | |
in this Software without prior written authorization from Robert M Supnik. | |
19-Mar-2012 RMS Fixed various declarations (Mark Pizzolato) | |
*/ | |
#include "sds_defs.h" | |
/* Data chain word */ | |
#define CHD_INT 040 /* int on chain */ | |
#define CHD_PAGE 037 /* new page # */ | |
/* Interlace POT */ | |
#define CHI_V_WC 14 /* word count */ | |
#define CHI_M_WC 01777 | |
#define CHI_GETWC(x) (((x) >> CHI_V_WC) & CHI_M_WC) | |
#define CHI_V_MA 0 /* mem address */ | |
#define CHI_M_MA 037777 | |
#define CHI_GETMA(x) (((x) >> CHI_V_MA) & CHI_M_MA) | |
/* System interrupt POT */ | |
#define SYI_V_GRP 18 /* group */ | |
#define SYI_M_GRP 077 | |
#define SYI_GETGRP(x) (((x) >> SYI_V_GRP) & SYI_M_GRP) | |
#define SYI_DIS (1 << 17) /* disarm if 0 */ | |
#define SYI_ARM (1 << 16) /* arm if 1 */ | |
#define SYI_M_INT 0177777 /* interrupt */ | |
/* Pseudo-device number for EOM/SKS mode 3 */ | |
#define I_GETDEV3(x) ((((x) & 020046000) != 020046000)? ((x) & DEV_MASK): DEV_MASK) | |
#define TST_XFR(d,c) (xfr_req && dev_map[d][c]) | |
#define SET_XFR(d,c) xfr_req = xfr_req | dev_map[d][c] | |
#define CLR_XFR(d,c) xfr_req = xfr_req & ~dev_map[d][c] | |
#define INV_DEV(d,c) (dev_dsp[d][c] == NULL) | |
#define VLD_DEV(d,c) (dev_dsp[d][c] != NULL) | |
#define TST_EOR(c) (chan_flag[c] & CHF_EOR) | |
#define QAILCE(a) (((a) >= POT_ILCY) && ((a) < (POT_ILCY + NUM_CHAN))) | |
uint8 chan_uar[NUM_CHAN]; /* unit addr */ | |
uint16 chan_wcr[NUM_CHAN]; /* word count */ | |
uint16 chan_mar[NUM_CHAN]; /* mem addr */ | |
uint8 chan_dcr[NUM_CHAN]; /* data chain */ | |
uint32 chan_war[NUM_CHAN]; /* word assembly */ | |
uint8 chan_cpw[NUM_CHAN]; /* char per word */ | |
uint8 chan_cnt[NUM_CHAN]; /* char count */ | |
uint16 chan_mode[NUM_CHAN]; /* mode */ | |
uint16 chan_flag[NUM_CHAN]; /* flags */ | |
static const char *chname[NUM_CHAN] = { | |
"W", "Y", "C", "D", "E", "F", "G", "H" | |
}; | |
extern uint32 M[MAXMEMSIZE]; /* memory */ | |
extern uint32 int_req; /* int req */ | |
extern uint32 xfr_req; /* xfer req */ | |
extern uint32 alert; /* pin/pot alert */ | |
extern uint32 X, EM2, EM3, OV, ion, bpt; | |
extern uint32 nml_mode, usr_mode; | |
extern int32 rtc_pie; | |
extern int32 stop_invins, stop_invdev, stop_inviop; | |
extern uint32 mon_usr_trap; | |
extern UNIT cpu_unit; | |
extern FILE *sim_log; | |
extern DEVICE *sim_devices[]; | |
t_stat chan_reset (DEVICE *dptr); | |
t_stat chan_read (int32 ch); | |
t_stat chan_write (int32 ch); | |
void chan_write_mem (int32 ch); | |
void chan_flush_war (int32 ch); | |
uint32 chan_mar_inc (int32 ch); | |
t_stat chan_eor (int32 ch); | |
t_stat pot_ilc (uint32 num, uint32 *dat); | |
t_stat pot_dcr (uint32 num, uint32 *dat); | |
t_stat pin_adr (uint32 num, uint32 *dat); | |
t_stat pot_fork (uint32 num, uint32 *dat); | |
t_stat dev_disc (uint32 ch, uint32 dev); | |
t_stat dev_wreor (uint32 ch, uint32 dev); | |
extern t_stat pot_RL1 (uint32 num, uint32 *dat); | |
extern t_stat pot_RL2 (uint32 num, uint32 *dat); | |
extern t_stat pot_RL4 (uint32 num, uint32 *dat); | |
extern t_stat pin_rads (uint32 num, uint32 *dat); | |
extern t_stat pot_rada (uint32 num, uint32 *dat); | |
extern t_stat pin_dsk (uint32 num, uint32 *dat); | |
extern t_stat pot_dsk (uint32 num, uint32 *dat); | |
t_stat pin_mux (uint32 num, uint32 *dat); | |
t_stat pot_mux (uint32 num, uint32 *dat); | |
extern void set_dyn_map (void); | |
/* SDS I/O model | |
A device is modeled by its interactions with a channel. Devices can only be | |
accessed via channels. Each channel has its own device address space. This | |
means devices can only be accessed from a specific channel. | |
I/O operations start with a channel connect. The EOM instruction is passed | |
to the device via the conn routine. This routine is also used for non-channel | |
EOM's to the device. For channel connects, the device must remember the | |
channel number. | |
The device responds (after a delay) by setting its XFR_RDY flag. This causes | |
the channel to invoke either the read or write routine (for input or output) | |
to get or put the next character. If the device is an asynchronous output | |
device, it calls routine chan_set_ordy to see if there is output available. | |
If there is, XFR_RDY is set; if not, the channel is marked to wake the | |
attached device when output is available. This prevents invalid rate errors. | |
Output may be terminated by a write end of record, a disconnect, or both. | |
Write end of record occurs when the word count reaches zero on an IORD or IORP | |
operation. It also occurs if a TOP instruction is issued. The device is | |
expected to respond by setting the end of record indicator in the channel, | |
which will in turn trigger an end of record interrupt. | |
When the channel operation completes, the channel disconnects and calls the | |
disconnect processor to perform any device specific cleanup. The differences | |
between write end of record and disconnect are subtle. On magtape output, | |
for example, both signal end of record; but write end of record allows the | |
magtape to continue moving, while disconnect halts its motion. | |
Valid devices supply a routine to handle potentially all I/O operations | |
(connect, disconnect, read, write, write end of record, sks). There are | |
separate routines for PIN and POT. | |
Channels could, optionally, handle 12b or 24b characters. The simulator can | |
support all widths. | |
*/ | |
t_stat chan_show_reg (FILE *st, UNIT *uptr, int32 val, void *desc); | |
struct aldisp { | |
t_stat (*pin) (uint32 num, uint32 *dat); /* altnum, *dat */ | |
t_stat (*pot) (uint32 num, uint32 *dat); /* altnum, *dat */ | |
}; | |
/* Channel data structures | |
chan_dev channel device descriptor | |
chan_unit channel unit descriptor | |
chan_reg channel register list | |
*/ | |
UNIT chan_unit = { UDATA (NULL, 0, 0) }; | |
REG chan_reg[] = { | |
{ BRDATA (UAR, chan_uar, 8, 6, NUM_CHAN) }, | |
{ BRDATA (WCR, chan_wcr, 8, 15, NUM_CHAN) }, | |
{ BRDATA (MAR, chan_mar, 8, 16, NUM_CHAN) }, | |
{ BRDATA (DCR, chan_dcr, 8, 6, NUM_CHAN) }, | |
{ BRDATA (WAR, chan_war, 8, 24, NUM_CHAN) }, | |
{ BRDATA (CPW, chan_cpw, 8, 2, NUM_CHAN) }, | |
{ BRDATA (CNT, chan_cnt, 8, 3, NUM_CHAN) }, | |
{ BRDATA (MODE, chan_mode, 8, 12, NUM_CHAN) }, | |
{ BRDATA (FLAG, chan_flag, 8, CHF_N_FLG, NUM_CHAN) }, | |
{ NULL } | |
}; | |
MTAB chan_mod[] = { | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, CHAN_W, "W", NULL, | |
NULL, &chan_show_reg, NULL }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, CHAN_Y, "Y", NULL, | |
NULL, &chan_show_reg, NULL }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, CHAN_C, "C", NULL, | |
NULL, &chan_show_reg, NULL }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, CHAN_D, "D", NULL, | |
NULL, &chan_show_reg, NULL }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, CHAN_E, "E", NULL, | |
NULL, &chan_show_reg, NULL }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, CHAN_F, "F", NULL, | |
NULL, &chan_show_reg, NULL }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, CHAN_G, "G", NULL, | |
NULL, &chan_show_reg, NULL }, | |
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, CHAN_H, "H", NULL, | |
NULL, &chan_show_reg, NULL } | |
}; | |
DEVICE chan_dev = { | |
"CHAN", &chan_unit, chan_reg, chan_mod, | |
1, 8, 8, 1, 8, 8, | |
NULL, NULL, &chan_reset, | |
NULL, NULL, NULL | |
}; | |
/* Tables */ | |
static const uint32 int_zc[8] = { | |
INT_WZWC, INT_YZWC, INT_CZWC, INT_DZWC, | |
INT_EZWC, INT_FZWC, INT_GZWC, INT_HZWC | |
}; | |
static const uint32 int_er[8] = { | |
INT_WEOR, INT_YEOR, INT_CEOR, INT_DEOR, | |
INT_EEOR, INT_FEOR, INT_GEOR, INT_HEOR | |
}; | |
/* dev_map maps device and channel numbers to a transfer flag masks */ | |
uint32 dev_map[64][NUM_CHAN]; | |
/* dev_dsp maps device and channel numbers to dispatch routines */ | |
t_stat (*dev_dsp[64][NUM_CHAN])() = { NULL }; | |
/* dev3_dsp maps system device numbers to dispatch routines */ | |
t_stat (*dev3_dsp[64])() = { NULL }; | |
/* dev_alt maps alert numbers to dispatch routines */ | |
struct aldisp dev_alt[] = { | |
{ NULL, NULL }, | |
{ NULL, &pot_ilc }, { NULL, &pot_ilc }, | |
{ NULL, &pot_ilc }, { NULL, &pot_ilc }, | |
{ NULL, &pot_ilc }, { NULL, &pot_ilc }, | |
{ NULL, &pot_ilc }, { NULL, &pot_ilc }, | |
{ NULL, &pot_dcr }, { NULL, &pot_dcr }, | |
{ NULL, &pot_dcr }, { NULL, &pot_dcr }, | |
{ NULL, &pot_dcr }, { NULL, &pot_dcr }, | |
{ NULL, &pot_dcr }, { NULL, &pot_dcr }, | |
{ &pin_adr, NULL }, { &pin_adr, NULL }, | |
{ &pin_adr, NULL }, { &pin_adr, NULL }, | |
{ &pin_adr, NULL }, { &pin_adr, NULL }, | |
{ &pin_adr, NULL }, { &pin_adr, NULL }, | |
{ NULL, &pot_RL1 }, { NULL, &pot_RL2 }, | |
{ NULL, &pot_RL4 }, | |
{ &pin_rads, NULL }, { NULL, &pot_rada }, | |
{ &pin_dsk, &pot_dsk }, { NULL, &pot_fork }, | |
{ &pin_mux, &pot_mux } | |
}; | |
/* Single word I/O instructions */ | |
t_stat op_wyim (uint32 inst, uint32 *dat) | |
{ | |
int32 ch, dev; | |
ch = (inst & 000200000)? CHAN_W: CHAN_Y; /* get chan# */ | |
dev = chan_uar[ch] & DEV_MASK; /* get dev # */ | |
if (chan_cnt[ch] <= chan_cpw[ch]) { /* buffer empty? */ | |
if (dev == 0) /* no device? dead */ | |
return STOP_INVIOP; | |
return STOP_IONRDY; /* hang until full */ | |
} | |
*dat = chan_war[ch]; /* get data */ | |
chan_war[ch] = 0; /* reset war */ | |
chan_cnt[ch] = 0; /* reset cnt */ | |
return SCPE_OK; | |
} | |
t_stat op_miwy (uint32 inst, uint32 dat) | |
{ | |
int32 ch, dev; | |
ch = (inst & 000200000)? CHAN_W: CHAN_Y; /* get chan# */ | |
dev = chan_uar[ch] & DEV_MASK; /* get dev # */ | |
if (chan_cnt[ch] != 0) { /* buffer full? */ | |
if (dev == 0) /* no device? dead */ | |
return STOP_INVIOP; | |
return STOP_IONRDY; /* hang until full */ | |
} | |
chan_war[ch] = dat; /* get data */ | |
chan_cnt[ch] = chan_cpw[ch] + 1; /* buffer full */ | |
if (chan_flag[ch] & CHF_OWAK) { /* output wake? */ | |
if (VLD_DEV (dev, ch)) /* wake channel */ | |
SET_XFR (dev, ch); | |
chan_flag[ch] = chan_flag[ch] & ~CHF_OWAK; /* clear wake */ | |
} | |
return SCPE_OK; | |
} | |
t_stat op_pin (uint32 *dat) | |
{ | |
uint32 al = alert; /* local copy */ | |
alert = 0; /* clear alert */ | |
if ((al == 0) || (dev_alt[al].pin == NULL)) /* inv alert? */ | |
CRETIOP; | |
return dev_alt[al].pin (al, dat); /* PIN from dev */ | |
} | |
t_stat op_pot (uint32 dat) | |
{ | |
uint32 al = alert; /* local copy */ | |
alert = 0; /* clear alert */ | |
if ((al == 0) || (dev_alt[al].pot == NULL)) /* inv alert? */ | |
CRETIOP; | |
return dev_alt[al].pot (al, &dat); /* POT to dev */ | |
} | |
/* EOM/EOD */ | |
t_stat op_eomd (uint32 inst) | |
{ | |
uint32 mod = I_GETIOMD (inst); /* get mode */ | |
uint32 ch = I_GETEOCH (inst); /* get chan # */ | |
uint32 dev = inst & DEV_MASK; /* get dev # */ | |
uint32 ch_dev = chan_uar[ch] & DEV_MASK; /* chan curr dev # */ | |
t_stat r; | |
switch (mod) { | |
case 0: /* IO control */ | |
if (dev) { /* new dev? */ | |
if (ch_dev) /* chan act? err */ | |
CRETIOP; | |
if (INV_DEV (dev, ch)) /* inv dev? err */ | |
CRETDEV; | |
chan_war[ch] = chan_cnt[ch] = 0; /* init chan */ | |
chan_flag[ch] = chan_dcr[ch] = 0; | |
chan_mode[ch] = chan_uar[ch] = 0; | |
if (ch >= CHAN_E) | |
chan_mode[ch] = CHM_CE; | |
if ((r = dev_dsp[dev][ch] (IO_CONN, inst, NULL)))/* connect */ | |
return r; | |
if ((inst & I_IND) || (ch >= CHAN_C)) { /* C-H? alert ilc */ | |
alert = POT_ILCY + ch; | |
chan_mar[ch] = chan_wcr[ch] = 0; | |
} | |
if (chan_flag[ch] & CHF_24B) /* 24B? 1 ch/wd */ | |
chan_cpw[ch] = 0; | |
else if (chan_flag[ch] & CHF_12B) /* 12B? 2 ch/wd */ | |
chan_cpw[ch] = CHC_GETCPW (inst) & 1; | |
else chan_cpw[ch] = CHC_GETCPW (inst); /* 6b, 1-4 ch/wd */ | |
chan_uar[ch] = dev; /* connected */ | |
if ((dev & DEV_OUT) && ion && !QAILCE (alert)) /* out, prog IO? */ | |
int_req = int_req | int_zc[ch]; /* initial intr */ | |
} | |
else return dev_disc (ch, ch_dev); /* disconnect */ | |
break; | |
case 1: /* buf control */ | |
if (QAILCE (alert)) { /* ilce alerted? */ | |
ch = alert - POT_ILCY; /* derive chan */ | |
if (ch >= CHAN_E) /* DACC? ext */ | |
inst = inst | CHM_CE; | |
chan_mode[ch] = inst; /* save mode */ | |
chan_mar[ch] = (CHM_GETHMA (inst) << 14) | /* get hi mar */ | |
(chan_mar[ch] & CHI_M_MA); | |
chan_wcr[ch] = (CHM_GETHWC (inst) << 10) | /* get hi wc */ | |
(chan_wcr[ch] & CHI_M_WC); | |
} | |
else if (dev) { /* dev EOM */ | |
if (INV_DEV (dev, ch)) /* inv dev? err */ | |
CRETDEV; | |
return dev_dsp[dev][ch] (IO_EOM1, inst, NULL); | |
} | |
else { /* chan EOM */ | |
inst = inst & 047677; | |
if (inst == 040000) { /* alert ilce */ | |
alert = POT_ILCY + ch; | |
chan_mar[ch] = chan_wcr[ch] = 0; | |
} | |
else if (inst == 002000) /* alert addr */ | |
alert = POT_ADRY + ch; | |
else if (inst == 001000) /* alert DCR */ | |
alert = POT_DCRY + ch; | |
else if (inst == 004000) { /* term output */ | |
if (ch_dev & DEV_OUT) { /* to output dev? */ | |
if (chan_cnt[ch] || (chan_flag[ch] & CHF_ILCE)) /* busy, DMA? */ | |
chan_flag[ch] = chan_flag[ch] | CHF_TOP; /* TOP pending */ | |
else return dev_wreor (ch, ch_dev); /* idle, write EOR */ | |
} /* end else TOP */ | |
else if (ch_dev & DEV_MT) { /* change to scan? */ | |
chan_uar[ch] = chan_uar[ch] | DEV_MTS; /* change dev addr */ | |
chan_flag[ch] = chan_flag[ch] | CHF_SCAN; /* set scan flag */ | |
} /* end else change scan */ | |
} /* end else term output */ | |
} /* end else chan EOM */ | |
break; | |
case 2: /* internal */ | |
if (ch >= CHAN_E) { /* EOD? */ | |
if (inst & 00300) { /* set EM? */ | |
if (inst & 00100) | |
EM2 = inst & 07; | |
if (inst & 00200) | |
EM3 = (inst >> 3) & 07; | |
set_dyn_map (); | |
} | |
break; | |
} /* end if EOD */ | |
if (inst & 00001) /* clr OV */ | |
OV = 0; | |
if (inst & 00002) /* ion */ | |
ion = 1; | |
else if (inst & 00004) /* iof */ | |
ion = 0; | |
if ((inst & 00010) && (((X >> 1) ^ X) & EXPS)) | |
OV = 1; | |
if (inst & 00020) /* alert sys int */ | |
alert = POT_SYSI; | |
if (inst & 00100) /* arm clk pls */ | |
rtc_pie = 1; | |
else if (inst & 00200) /* disarm pls */ | |
rtc_pie = 0; | |
if ((inst & 01400) == 01400) /* alert RL4 */ | |
alert = POT_RL4; | |
else if (inst & 00400) /* alert RL1 */ | |
alert = POT_RL1; | |
else if (inst & 01000) /* alert RL2 */ | |
alert = POT_RL2; | |
if (inst & 02000) { /* nml to mon */ | |
nml_mode = usr_mode = 0; | |
if (inst & 00400) | |
mon_usr_trap = 1; | |
} | |
break; | |
case 3: /* special */ | |
dev = I_GETDEV3 (inst); /* special device */ | |
if (dev3_dsp[dev]) /* defined? */ | |
return dev3_dsp[dev] (IO_CONN, inst, NULL); | |
CRETINS; | |
} /* end case */ | |
return SCPE_OK; | |
} | |
/* Skip if not signal */ | |
t_stat op_sks (uint32 inst, uint32 *dat) | |
{ | |
uint32 mod = I_GETIOMD (inst); /* get mode */ | |
uint32 ch = I_GETSKCH (inst); /* get chan # */ | |
uint32 dev = inst & DEV_MASK; /* get dev # */ | |
*dat = 0; | |
if ((ch == 4) && !(inst & 037774)) { /* EM test */ | |
if (((inst & 0001) && (EM2 != 2)) || | |
((inst & 0002) && (EM3 != 3))) | |
*dat = 1; | |
return SCPE_OK; | |
} | |
switch (mod) { | |
case 1: /* ch, dev */ | |
if (dev) { /* device */ | |
if (INV_DEV (dev, ch)) /* inv dev? err */ | |
CRETDEV; | |
dev_dsp[dev][ch] (IO_SKS, inst, dat); /* do test */ | |
} | |
else { /* channel */ | |
if (((inst & 04000) && (chan_uar[ch] == 0)) || | |
((inst & 02000) && (chan_wcr[ch] == 0)) || | |
((inst & 01000) && ((chan_flag[ch] & CHF_ERR) == 0)) || | |
((inst & 00400) && (chan_flag[ch] & CHF_IREC))) | |
*dat = 1; | |
} | |
break; | |
case 2: /* internal test */ | |
if (inst & 0001) { /* test OV */ | |
*dat = OV ^ 1; /* skip if off */ | |
OV = 0; /* and reset */ | |
break; | |
} | |
if (((inst & 00002) && !ion) || /* ion, bpt test */ | |
((inst & 00004) && ion) || | |
((inst & 00010) && ((chan_flag[CHAN_W] & CHF_ERR) == 0)) || | |
((inst & 00020) && ((chan_flag[CHAN_Y] & CHF_ERR) == 0)) || | |
((inst & 00040) && ((bpt & 001) == 0)) || | |
((inst & 00100) && ((bpt & 002) == 0)) || | |
((inst & 00200) && ((bpt & 004) == 0)) || | |
((inst & 00400) && ((bpt & 010) == 0)) || | |
((inst & 01000) && (chan_uar[CHAN_W] == 0)) || | |
((inst & 02000) && (chan_uar[CHAN_Y] == 0))) | |
*dat = 1; | |
break; | |
case 3: /* special */ | |
dev = I_GETDEV3 (inst); /* special device */ | |
if (dev3_dsp[dev]) | |
dev3_dsp[dev] (IO_SKS, inst, dat); | |
else CRETINS; | |
} /* end case */ | |
return SCPE_OK; | |
} | |
/* PIN/POT routines */ | |
t_stat pot_ilc (uint32 num, uint32 *dat) | |
{ | |
uint32 ch = num - POT_ILCY; | |
chan_mar[ch] = (chan_mar[ch] & ~CHI_M_MA) | CHI_GETMA (*dat); | |
chan_wcr[ch] = (chan_wcr[ch] & ~CHI_M_WC) | CHI_GETWC (*dat); | |
chan_flag[ch] = chan_flag[ch] | CHF_ILCE; | |
return SCPE_OK; | |
} | |
t_stat pot_dcr (uint32 num, uint32 *dat) | |
{ | |
uint32 ch = num - POT_DCRY; | |
chan_dcr[ch] = (*dat) & (CHD_INT | CHD_PAGE); | |
chan_flag[ch] = chan_flag[ch] | CHF_DCHN; | |
return SCPE_OK; | |
} | |
t_stat pin_adr (uint32 num, uint32 *dat) | |
{ | |
uint32 ch = num - POT_ADRY; | |
*dat = chan_mar[ch] & PAMASK; | |
return SCPE_OK; | |
} | |
/* System interrupt POT. | |
The SDS 940 timesharing system uses a permanently asserted | |
system interrupt as a way of forking the teletype input | |
interrupt handler to a lower priority. The interrupt is | |
armed to set up the fork, and disarmed in the fork routine */ | |
t_stat pot_fork (uint32 num, uint32 *dat) | |
{ | |
uint32 igrp = SYI_GETGRP (*dat); /* get group */ | |
uint32 fbit = (1 << (VEC_FORK & 017)); /* bit in group */ | |
if (igrp == (VEC_FORK / 020)) { /* right group? */ | |
if ((*dat & SYI_ARM) && (*dat & fbit)) /* arm, bit set? */ | |
int_req = int_req | INT_FORK; | |
if ((*dat & SYI_DIS) && !(*dat & fbit)) /* disarm, bit clr? */ | |
int_req = int_req & ~INT_FORK; | |
} | |
return SCPE_OK; | |
} | |
/* Channel read invokes the I/O device to get the next character and, | |
if not end of record, assembles it into the word assembly register. | |
If the interlace is on, the full word is stored in memory. | |
The key difference points for the various terminal functions are | |
end of record comp: EOT interrupt | |
IORD, IOSD: EOR interrupt, disconnect | |
IORP, IOSP: EOR interrupt, interrecord | |
interlace off: comp: EOW interrupt | |
IORD, IORP: ignore | |
IOSD, IOSP: overrun error | |
--wcr == 0: comp: clear interlace | |
IORD, IORP, IOSP: ZWC interrupt | |
IOSD: ZWC interrupt, EOR interrupt, disconnect | |
Note that the channel can be disconnected if CHN_EOR is set, but must | |
not be if XFR_REQ is set */ | |
t_stat chan_read (int32 ch) | |
{ | |
uint32 dat = 0; | |
uint32 dev = chan_uar[ch] & DEV_MASK; | |
uint32 tfnc = CHM_GETFNC (chan_mode[ch]); | |
t_stat r = SCPE_OK; | |
if (dev && TST_XFR (dev, ch)) { /* ready to xfr? */ | |
if (INV_DEV (dev, ch)) CRETIOP; /* can't read? */ | |
r = dev_dsp[dev][ch] (IO_READ, dev, &dat); /* read data */ | |
if (r) /* error? */ | |
chan_flag[ch] = chan_flag[ch] | CHF_ERR; | |
if (chan_flag[ch] & CHF_24B) /* 24B? */ | |
chan_war[ch] = dat; | |
else if (chan_flag[ch] & CHF_12B) /* 12B? */ | |
chan_war[ch] = ((chan_war[ch] << 12) | (dat & 07777)) & DMASK; | |
else chan_war[ch] = ((chan_war[ch] << 6) | (dat & 077)) & DMASK; | |
if (chan_flag[ch] & CHF_SCAN) /* scanning? */ | |
chan_cnt[ch] = chan_cpw[ch]; /* never full */ | |
else chan_cnt[ch] = chan_cnt[ch] + 1; /* insert char */ | |
if (chan_cnt[ch] > chan_cpw[ch]) { /* full? */ | |
if (chan_flag[ch] & CHF_ILCE) { /* interlace on? */ | |
chan_write_mem (ch); /* write to mem */ | |
if (chan_wcr[ch] == 0) { /* wc zero? */ | |
chan_flag[ch] = chan_flag[ch] & ~CHF_ILCE; /* clr interlace */ | |
if ((tfnc != CHM_COMP) && (chan_mode[ch] & CHM_ZC)) | |
int_req = int_req | int_zc[ch]; /* zwc interrupt */ | |
if (tfnc == CHM_IOSD) { /* IOSD? also EOR */ | |
if (chan_mode[ch] & CHM_ER) | |
int_req = int_req | int_er[ch]; | |
dev_disc (ch, dev); /* disconnect */ | |
} /* end if IOSD */ | |
} /* end if wcr == 0 */ | |
} /* end if ilce on */ | |
else { /* interlace off */ | |
if (TST_EOR (ch)) /* eor? */ | |
return chan_eor (ch); | |
if (tfnc == CHM_COMP) { /* C: EOW, intr */ | |
if (ion) | |
int_req = int_req | int_zc[ch]; | |
} | |
else if (tfnc & CHM_SGNL) /* Sx: error */ | |
chan_flag[ch] = chan_flag[ch] | CHF_ERR; | |
else chan_cnt[ch] = chan_cpw[ch]; /* Rx: ignore */ | |
} /* end else ilce */ | |
} /* end if full */ | |
} /* end if xfr */ | |
if (TST_EOR (ch)) { /* end record? */ | |
if (tfnc == CHM_COMP) /* C: fill war */ | |
chan_flush_war (ch); | |
else if (chan_cnt[ch]) { /* RX, CX: fill? */ | |
chan_flush_war (ch); /* fill war */ | |
if (chan_flag[ch] & CHF_ILCE) /* ilce on? store */ | |
chan_write_mem (ch); | |
} /* end else if cnt */ | |
return chan_eor (ch); /* eot/eor int */ | |
} | |
return r; | |
} | |
void chan_write_mem (int32 ch) | |
{ | |
WriteP (chan_mar[ch], chan_war[ch]); /* write to mem */ | |
chan_mar[ch] = chan_mar_inc (ch); /* incr mar */ | |
chan_wcr[ch] = (chan_wcr[ch] - 1) & 077777; /* decr wcr */ | |
chan_war[ch] = 0; /* reset war */ | |
chan_cnt[ch] = 0; /* reset cnt */ | |
return; | |
} | |
void chan_flush_war (int32 ch) | |
{ | |
int32 i = (chan_cpw[ch] - chan_cnt[ch]) + 1; | |
if (i) { | |
if (chan_flag[ch] & CHF_24B) | |
chan_war[ch] = 0; | |
else if (chan_flag[ch] & CHF_12B) | |
chan_war[ch] = (chan_war[ch] << 12) & DMASK; | |
else chan_war[ch] = (chan_war[ch] << (i * 6)) & DMASK; | |
chan_cnt[ch] = chan_cpw[ch] + 1; | |
} | |
return; | |
} | |
/* Channel write gets the next character and sends it to the I/O device. | |
If this is the last character in an interlace operation, the end of | |
record operation is invoked. | |
The key difference points for the various terminal functions are | |
end of record: comp: EOT interrupt | |
IORD, IOSD: EOR interrupt, disconnect | |
IORP, IOSP: EOR interrupt, interrecord | |
interlace off: if not end of record, EOW interrupt | |
--wcr == 0: comp: EOT interrupt, disconnect | |
IORD, IORP: ignore | |
IOSD: ZWC interrupt, disconnect | |
IOSP: ZWC interrupt, interrecord | |
*/ | |
t_stat chan_write (int32 ch) | |
{ | |
uint32 dat = 0; | |
uint32 dev = chan_uar[ch] & DEV_MASK; | |
uint32 tfnc = CHM_GETFNC (chan_mode[ch]); | |
t_stat r = SCPE_OK; | |
if (dev && TST_XFR (dev, ch)) { /* ready to xfr? */ | |
if (INV_DEV (dev, ch)) /* invalid dev? */ | |
CRETIOP; | |
if (chan_cnt[ch] == 0) { /* buffer empty? */ | |
if (chan_flag[ch] & CHF_ILCE) { /* interlace on? */ | |
chan_war[ch] = ReadP (chan_mar[ch]); | |
chan_mar[ch] = chan_mar_inc (ch); /* incr mar */ | |
chan_wcr[ch] = (chan_wcr[ch] - 1) & 077777; /* decr mar */ | |
chan_cnt[ch] = chan_cpw[ch] + 1; /* set cnt */ | |
} | |
else { /* ilce off */ | |
CLR_XFR (dev, ch); /* cant xfr */ | |
if (TST_EOR (dev)) /* EOR? */ | |
return chan_eor (ch); | |
chan_flag[ch] = chan_flag[ch] | CHF_ERR; /* rate err */ | |
return SCPE_OK; | |
} /* end else ilce */ | |
} /* end if cnt */ | |
chan_cnt[ch] = chan_cnt[ch] - 1; /* decr cnt */ | |
if (chan_flag[ch] & CHF_24B) /* 24B? */ | |
dat = chan_war[ch]; | |
else if (chan_flag[ch] & CHF_12B) { /* 12B? */ | |
dat = (chan_war[ch] >> 12) & 07777; /* get halfword */ | |
chan_war[ch] = (chan_war[ch] << 12) & DMASK; /* remove from war */ | |
} | |
else { /* 6B */ | |
dat = (chan_war[ch] >> 18) & 077; /* get char */ | |
chan_war[ch] = (chan_war[ch] << 6) & DMASK; /* remove from war */ | |
} | |
r = dev_dsp[dev][ch] (IO_WRITE, dev, &dat); /* write */ | |
if (r) /* error? */ | |
chan_flag[ch] = chan_flag[ch] | CHF_ERR; | |
if (chan_cnt[ch] == 0) { /* buf empty? */ | |
if (chan_flag[ch] & CHF_ILCE) { /* ilce on? */ | |
if (chan_wcr[ch] == 0) { /* wc now 0? */ | |
chan_flag[ch] = chan_flag[ch] & ~CHF_ILCE; /* ilc off */ | |
if (tfnc == CHM_COMP) { /* compatible? */ | |
if (ion) | |
int_req = int_req | int_zc[ch]; | |
dev_disc (ch, dev); /* disconnnect */ | |
} /* end if comp */ | |
else { /* extended */ | |
if (chan_mode[ch] & CHM_ZC) /* ZWC int */ | |
int_req = int_req | int_zc[ch]; | |
if (tfnc == CHM_IOSD) { /* SD */ | |
if (chan_mode[ch] & CHM_ER) /* EOR int */ | |
int_req = int_req | int_er[ch]; | |
dev_disc (ch, dev); /* disconnnect */ | |
} /* end if SD */ | |
else if (!(tfnc && CHM_SGNL) || /* IORx or IOSP TOP? */ | |
(chan_flag[ch] & CHF_TOP)) | |
dev_wreor (ch, dev); /* R: write EOR */ | |
chan_flag[ch] = chan_flag[ch] & ~CHF_TOP; | |
} /* end else comp */ | |
} /* end if wcr */ | |
} /* end if ilce */ | |
else if (chan_flag[ch] & CHF_TOP) { /* off, TOP pending? */ | |
chan_flag[ch] = chan_flag[ch] & ~CHF_TOP; /* clear TOP */ | |
dev_wreor (ch, dev); /* write EOR */ | |
} | |
else if (ion) /* no TOP, EOW intr */ | |
int_req = int_req | int_zc[ch]; | |
} /* end if cnt */ | |
} /* end if xfr */ | |
if (TST_EOR (ch)) /* eor rcvd? */ | |
return chan_eor (ch); | |
return r; | |
} | |
/* MAR increment */ | |
uint32 chan_mar_inc (int32 ch) | |
{ | |
uint32 t = (chan_mar[ch] + 1) & PAMASK; /* incr mar */ | |
if ((chan_flag[ch] & CHF_DCHN) && ((t & VA_POFF) == 0)) { /* chain? */ | |
chan_flag[ch] = chan_flag[ch] & ~CHF_DCHN; /* clr flag */ | |
if (chan_dcr[ch] & CHD_INT) /* if armed, intr */ | |
int_req = int_req | int_zc[ch]; | |
t = (chan_dcr[ch] & CHD_PAGE) << VA_V_PN; /* new mar */ | |
} | |
return t; | |
} | |
/* End of record action */ | |
t_stat chan_eor (int32 ch) | |
{ | |
uint32 tfnc = CHM_GETFNC (chan_mode[ch]); | |
uint32 dev = chan_uar[ch] & DEV_MASK; | |
chan_flag[ch] = chan_flag[ch] & ~(CHF_EOR | CHF_ILCE); /* clr eor, ilce */ | |
if (((tfnc == CHM_COMP) && ion) || (chan_mode[ch] & CHM_ER)) | |
int_req = int_req | int_er[ch]; /* EOT/EOR? */ | |
if (dev && (tfnc & CHM_PROC)) /* P, still conn? */ | |
chan_flag[ch] = chan_flag[ch] | CHF_IREC; /* interrecord */ | |
else return dev_disc (ch, dev); /* disconnect */ | |
return SCPE_OK; | |
} | |
/* Utility routines */ | |
t_stat dev_disc (uint32 ch, uint32 dev) | |
{ | |
chan_uar[ch] = 0; /* disconnect */ | |
if (dev_dsp[dev][ch]) | |
return dev_dsp[dev][ch] (IO_DISC, dev, NULL); | |
return SCPE_OK; | |
} | |
t_stat dev_wreor (uint32 ch, uint32 dev) | |
{ | |
if (dev_dsp[dev][ch]) | |
return dev_dsp[dev][ch] (IO_WREOR, dev, NULL); | |
chan_flag[ch] = chan_flag[ch] | CHF_EOR; /* set eor */ | |
return SCPE_OK; | |
} | |
/* Externally visible routines */ | |
/* Channel driver */ | |
t_stat chan_process (void) | |
{ | |
int32 i, dev; | |
t_stat r; | |
for (i = 0; i < NUM_CHAN; i++) { /* loop thru */ | |
dev = chan_uar[i] & DEV_MASK; /* get dev */ | |
if ((dev && TST_XFR (dev, i)) || TST_EOR (i)) { /* chan active? */ | |
if (dev & DEV_OUT) /* write */ | |
r = chan_write (i); | |
else r = chan_read (i); /* read */ | |
if (r) | |
return r; | |
} | |
} | |
return SCPE_OK; | |
} | |
/* Test for channel active */ | |
t_bool chan_testact (void) | |
{ | |
int32 i, dev; | |
for (i = 0; i < NUM_CHAN; i++) { | |
dev = chan_uar[i] & DEV_MASK; | |
if ((dev && TST_XFR (dev, i)) || TST_EOR (i)) | |
return 1; | |
} | |
return 0; | |
} | |
/* Async output device ready for more data */ | |
void chan_set_ordy (int32 ch) | |
{ | |
if ((ch >= 0) && (ch < NUM_CHAN)) { | |
int32 dev = chan_uar[ch] & DEV_MASK; /* get dev */ | |
if (chan_cnt[ch] || (chan_flag[ch] & CHF_ILCE)) /* buf or ilce? */ | |
SET_XFR (dev, ch); /* set xfr flg */ | |
else chan_flag[ch] = chan_flag[ch] | CHF_OWAK; /* need wakeup */ | |
} | |
return; | |
} | |
/* Set flag in channel */ | |
void chan_set_flag (int32 ch, uint32 fl) | |
{ | |
if ((ch >= 0) && (ch < NUM_CHAN)) | |
chan_flag[ch] = chan_flag[ch] | fl; | |
return; | |
} | |
/* Set UAR in channel */ | |
void chan_set_uar (int32 ch, uint32 dev) | |
{ | |
if ((ch >= 0) && (ch < NUM_CHAN)) | |
chan_uar[ch] = dev & DEV_MASK; | |
return; | |
} | |
/* Disconnect channel */ | |
void chan_disc (int32 ch) | |
{ | |
if ((ch >= 0) && (ch < NUM_CHAN)) | |
chan_uar[ch] = 0; | |
return; | |
} | |
/* Reset channels */ | |
t_stat chan_reset (DEVICE *dptr) | |
{ | |
int32 i; | |
xfr_req = 0; | |
for (i = 0; i < NUM_CHAN; i++) { | |
chan_uar[i] = 0; | |
chan_wcr[i] = 0; | |
chan_mar[i] = 0; | |
chan_dcr[i] = 0; | |
chan_war[i] = 0; | |
chan_cpw[i] = 0; | |
chan_cnt[i] = 0; | |
chan_mode[i] = 0; | |
chan_flag[i] = 0; | |
} | |
return SCPE_OK; | |
} | |
/* Channel assignment routines */ | |
t_stat set_chan (UNIT *uptr, int32 val, char *sptr, void *desc) | |
{ | |
DEVICE *dptr; | |
DIB *dibp; | |
int32 i; | |
if (sptr == NULL) /* valid args? */ | |
return SCPE_ARG; | |
if (uptr == NULL) | |
return SCPE_IERR; | |
dptr = find_dev_from_unit (uptr); | |
if (dptr == NULL) | |
return SCPE_IERR; | |
dibp = (DIB *) dptr->ctxt; | |
if (dibp == NULL) | |
return SCPE_IERR; | |
for (i = 0; i < NUM_CHAN; i++) { /* match input */ | |
if (strcmp (sptr, chname[i]) == 0) { /* find string */ | |
if (val && !(val & (1 << i))) /* legal? */ | |
return SCPE_ARG; | |
dibp->chan = i; /* store new */ | |
return SCPE_OK; | |
} | |
} | |
return SCPE_ARG; | |
} | |
t_stat show_chan (FILE *st, UNIT *uptr, int32 val, void *desc) | |
{ | |
DEVICE *dptr; | |
DIB *dibp; | |
if (uptr == NULL) | |
return SCPE_IERR; | |
dptr = find_dev_from_unit (uptr); | |
if (dptr == NULL) | |
return SCPE_IERR; | |
dibp = (DIB *) dptr->ctxt; | |
if (dibp == NULL) | |
return SCPE_IERR; | |
fprintf (st, "channel=%s", chname[dibp->chan]); | |
return SCPE_OK; | |
} | |
/* Init device tables */ | |
t_bool io_init (void) | |
{ | |
DEVICE *dptr; | |
DIB *dibp; | |
DSPT *tplp; | |
int32 ch; | |
uint32 i, j, dev, doff; | |
/* Clear dispatch table, device map */ | |
for (i = 0; i < NUM_CHAN; i++) { | |
for (j = 0; j < (DEV_MASK + 1); j++) { | |
dev_dsp[j][i] = NULL; | |
dev_map[j][i] = 0; | |
} | |
} | |
/* Test each device for conflict; add to map; init tables */ | |
for (i = 0; (dptr = sim_devices[i]); i++) { /* loop thru devices */ | |
dibp = (DIB *) dptr->ctxt; /* get DIB */ | |
if ((dibp == NULL) || (dptr->flags & DEV_DIS)) /* exist, enabled? */ | |
continue; | |
ch = dibp->chan; /* get channel */ | |
dev = dibp->dev; /* get device num */ | |
if (ch < 0) /* special device */ | |
dev3_dsp[dev] = dibp->iop; | |
else { | |
if (dibp->tplt == NULL) /* must have template */ | |
return TRUE; | |
for (tplp = dibp->tplt; tplp->num; tplp++) { /* loop thru templates */ | |
for (j = 0; j < tplp->num; j++) { /* repeat as needed */ | |
doff = dev + tplp->off + j; /* get offset dnum */ | |
if (dev_map[doff][ch]) { /* slot in use? */ | |
printf ("Device number conflict, chan = %s, devno = %02o\n", | |
chname[ch], doff); | |
if (sim_log) | |
fprintf (sim_log, "Device number conflict, chan = %s, dev = %02o\n", | |
chname[ch], doff); | |
return TRUE; | |
} | |
dev_map[doff][ch] = dibp->xfr; /* set xfr flag */ | |
dev_dsp[doff][ch] = dibp->iop; /* set dispatch */ | |
} /* end for j */ | |
} /* end for tplt */ | |
} /* end else */ | |
} /* end for i */ | |
return FALSE; | |
} | |
/* Display channel state */ | |
t_stat chan_show_reg (FILE *st, UNIT *uptr, int32 val, void *desc) | |
{ | |
if ((val < 0) || (val >= NUM_CHAN)) return SCPE_IERR; | |
fprintf (st, "UAR: %02o\n", chan_uar[val]); | |
fprintf (st, "WCR: %05o\n", chan_wcr[val]); | |
fprintf (st, "MAR: %06o\n", chan_mar[val]); | |
fprintf (st, "DCR: %02o\n", chan_dcr[val]); | |
fprintf (st, "WAR: %08o\n", chan_war[val]); | |
fprintf (st, "CPW: %o\n", chan_cpw[val]); | |
fprintf (st, "CNT: %o\n", chan_cnt[val]); | |
fprintf (st, "MODE: %03o\n", chan_mode[val]); | |
fprintf (st, "FLAG: %04o\n", chan_flag[val]); | |
return SCPE_OK; | |
} |