Rivoreo Source Code Repositories
src.rivoreo.one / emulators / simh / 733f904b8c5a5df3920e7d28e4cfdc728ccdf2e6 / . / sim_rev.h
blob: 7eb068f2b9cba8ee4a97b4f5710387d316cf7189 [file] [log] [blame] [raw]
/* sim_rev.h: simulator revisions and current rev level
Copyright (c) 1993-2012, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
*/
#ifndef SIM_REV_H_
#define SIM_REV_H_ 0
#ifndef SIM_MAJOR
#define SIM_MAJOR 4
#endif
#ifndef SIM_MINOR
#define SIM_MINOR 0
#endif
#ifndef SIM_PATCH
#define SIM_PATCH 0
#endif
#ifndef SIM_DELTA
#define SIM_DELTA 0
#endif
#ifndef SIM_VERSION_MODE
#define SIM_VERSION_MODE "Beta"
#endif
#if defined(SIM_NEED_GIT_COMMIT_ID)
#include ".git-commit-id.h"
#endif
#if !defined(SIM_GIT_COMMIT_ID)
#define SIM_GIT_COMMIT_ID $Format:%H$
#endif
/*
The comment section below reflects the manual editing process which was in place
prior to the use of the git source control system on at https://gihub.com/simh/simh
Details about all future fixes will be visible in the source control system's
history.
*/
/*
V3.9 revision history
patch date module(s) and fix(es)
0 01-May-2012 scp.c:
- added *nix READLINE support (Mark Pizzolato)
- fixed handling of DO with no arguments (Dave Bryan)
- fixed "SHOW DEVICE" with only one enabled unit (Dave Bryan)
- clarified some help messages (Mark Pizzolato)
- added "SHOW SHOW" and "SHOW <dev> SHOW" commands (Mark Pizzolato)
- fixed bug in deposit stride for numeric input (John Dundas)
sim_console.c
- added support for BREAK key on Windows (Mark Pizzolato)
sim_ether.c
- major revision (Dave Hittner and Mark Pizzolato)
- fixed array overrun which caused SEGFAULT on hosts with many
devices which libpcap can access.
- fixed duplicate MAC address detection to work reliably on switch
connected LANs
sim_tmxr.c:
- made telnet option negotiation more reliable, VAX simulator now
works with PuTTY as console (Mark Pizzolato)
h316_cpu.c:
- fixed bugs in MPY, DIV introduced in 3.8-1 (from Theo Engel)
- fixed bugs in double precision, normalization, SC (from Adrian Wise)
- fixed XR behavior (from Adrian Wise)
hp2100 all peripherals (Dave Bryan):
- Changed I/O signal handlers for newly revised signal model
- Deprecated DEVNO modifier in favor of SC
hp2100_cpu.c (Dave Bryan):
- Minor speedup in "is_mapped"
- Added casts to cpu_mod, dmasio, dmapio, cpu_reset, dma_reset
- Fixed I/O return status bug for DMA cycles
- Failed I/O cycles now stop on failing instruction
- Revised DMA for new multi-card paradigm
- Consolidated DMA reset routines
- DMA channels renamed from 0,1 to 1,2 to match documentation
- Changed I/O instructions, handlers, and DMA for revised signal model
- Changed I/O dispatch table to use DIB pointers
- Removed DMA latency counter
- Fixed DMA requests to enable stealing every cycle
- Fixed DMA priority for channel 1 over channel 2
- Corrected comments for "cpu_set_idle"
hp2100_cpu.h:
- Changed declarations for VMS compiler
hp2100_cpu0.c (Dave Bryan):
- Removed DS note regarding PIF card (is now implemented)
hp2100_cpu4.c (Dave Bryan):
- Added OPSIZE casts to fp_accum calls in .FPWR/.TPWR
hp2100_cpu5.c (Dave Bryan):
- Added sign extension for dim count in "cpu_ema_resolve"
- Eliminated unused variable in "cpu_ema_vset"
hp2100_cpu6.c (Dave Bryan):
- DMA channels renamed from 0,1 to 1,2 to match documentation
hp2100_cpu7.c (Dave Bryan):
- Corrected "opsize" parameter type in vis_abs
hp2100_defs.h (Dave Bryan):
- Added hp_setsc, hp_showsc functions to support SC modifier
- DMA channels renamed from 0,1 to 1,2 to match documentation
- Revised I/O signal enum values for concurrent signals
- Revised I/O macros for new signal handling
- Added DA and DC device select code assignments
hp2100_di.c, hp2100_di.h (Dave Bryan):
- Implemented 12821A HP-IB Disc Interface
hp2100_di_da.c (Dave Bryan):
- Implemented 7906H/20H/25H ICD disc drives
hp2100_dp.c (Dave Bryan):
- Added CNTLR_TYPE cast to dp_settype
hp2100_ds.c (Dave Bryan):
- Rewritten to use the MAC/ICD disc controller library
- ioIOO now notifies controller service of parameter output
- Corrected SRQ generation and FIFO under/overrun detection
- Corrected Clear command to conform to the hardware
- Fixed Request Status to return Unit Unavailable if illegal
- Seek and Cold Load Read now Seek Check if seek in progress
- Remodeled command wait for seek completion
- Corrected status returns for disabled drive, auto-seek
beyond drive limits, Request Sector Address and Wakeup
with invalid or offline unit
- Address verification reenabled if auto-seek during
Read Without Verify
hp2100_fp1.c (Dave Bryan):
- Added missing precision on constant "one" in fp_trun
- Completed the comments for divide; no code changes
hp2100_ipl.c (Dave Bryan):
- Added CARD_INDEX casts to dib.card_index
- A failed STC may now be retried
- Consolidated reporting of consecutive CRS signals
- Revised for new multi-card paradigm
hp2100_lps.c (Dave Bryan):
- Revised detection of CLC at last DMA cycle
- Corrected 12566B (DIAG mode) jumper settings
hp2100_ms.c (Dave Bryan):
- Added CNTLR_TYPE cast to ms_settype
hp2100_mt.c (Dave Bryan):
- Removed redundant MTAB_VUN from "format" MTAB entry
- Fixed command scanning error in mtcio ioIOO handler
hp2100_stddev.c (Dave Bryan):
- Add TBG as a logical name for the CLK device
hp2100_sys.c (Dave Bryan):
- Deprecated DEVNO in favor of SC
- Added hp_setsc, hp_showsc functions to support SC modifier
- Added DA and dummy DC devices
- DMA channels renamed from 0,1 to 1,2 to match documentation
- Changed DIB access for revised signal model
hp_disclib.c, hp_disclib.h (Dave Bryan)
- Created MAC/ICD disc controller library
i1401_cd.c:
- fixed read stacker operation in column binary mode
- fixed punch stacker operation (Van Snyder)
id_pas.c:
- fixed TT_GET_MODE test to use TTUF_MODE_x (Michael Bloom)
- revised to use clock coscheduling
id_tt.c, id_ttc.p:
- revised to use clock coscheduling
id_uvc.c:
- added clock coscheduling routine
1401_cpu.c:
- reverted multiple tape indicator implementation
- fixed EOT indicator test not to clear indicator (Van Snyder)
- fixed divide not to clear word marks in quotient (Van Snyder)
- revised divide algorithm (Van Snyder)
i1401_mt.c:
- reverted multiple tape indicator implementation
- fixed END indicator test not to clear indicator (Van Snyder)
- fixed backspace over tapemark not to set EOR (Van Snyder)
- added no rewind option (Van Snyder)
i1401_sys.c:
- fixed misuse of & instead of && in decode (Peter Schorn)
pdp1_cpu.c:
- fixed misuse of & instead of && in Ea_ch (Michael Bloom)
pdp1_stddev.c:
- fixed unitialized variable in tty output service (Michael Bloom)
pdp10_fe.c:
- revised to use clock coscheduling
pdp11_defs.h:
- fixed priority of PIRQ vs IO; added INT_INTERNALn
pdp11_io.c:
- fixed Qbus interrupts to treat all IO devices (except clock) as BR4
- fixed order of int_internal (Jordi Guillaumes i Pons)
ppd11_rf.c
- fixed bug in updating mem addr extension (Peter Schorn)
pdp11_rk.c:
- fixed bug in read header (Walter F Mueller)
pdp11_rl.c:
- added debug support
pdp11_rq.c:
- added RD32 support
pdp11_tq.c: (Mark Pizzolato)
- set UNIT_SXC flag when a tape mark is encountered
during forward motion read operations
- fixed logic which clears UNIT_SXC to check command modifier
- added CMF_WR flag to tq_cmf entry for OP_WTM
- made non-immediate rewind positioning operations take 2 seconds
- added UNIT_IDLE flag to tq units.
- fixed debug output of tape file positions when they are 64b
- added more debug output after positioning operations
- added textual display of the command being performed
- fixed comments about register addresses
pdp11_ts.c:
- fixed t_addr printouts for 64b big-endian systems (Mark Pizzolato)
pdp11_tu.c:
- fixed t_addr printouts for 64b big-endian systems (Mark Pizzolato)
pdp11_vh.c: (Mark Pizzolato)
- fixed SET VH LINES=n to correctly adjust the number
of lines available to be 8, 16, 24, or 32.
- fixed performance issue avoiding redundant polling
pdp11_xq.c: (Mark Pizzolato)
- Fixed missing information from save/restore which
caused operations to not complete correctly after
a restore until the OS reset the controller.
- Added address conflict check during attach.
- Fixed loopback processing to correctly handle forward packets.
- Fixed interrupt dispatch issue which caused delivered packets
(in and out) to sometimes not interrupt the CPU after processing.
- Fixed the SCP visibile SA registers to always display the
ROM mac address, even after it is changed by SET XQ MAC=.
- Added changes so that the Console DELQA diagnostic (>>>TEST 82)
will succeed.
- Added DELQA-T (aka DELQA Plus) device emulation support.
- Added dropped frame statistics to record when the receiver discards
received packets due to the receiver being disabled, or due to the
XQ device's packet receive queue being full.
- Fixed bug in receive processing when we're not polling. This could
cause receive processing to never be activated again if we don't
read all available packets via eth_read each time we get the
opportunity.
- Added the ability to Coalesce received packet interrupts. This
is enabled by SET XQ POLL=DELAY=nnn where nnn is a number of
microseconds to delay the triggering of an interrupt when a packet
is received.
- Added SET XQ POLL=DISABLE (aka SET XQ POLL=0) to operate without
polling for packet read completion.
- Changed the sanity and id timer mechanisms to use a separate timer
unit so that transmit and recieve activities can be dealt with
by the normal xq_svc routine.
Dynamically determine the timer polling rate based on the
calibrated tmr_poll and clk_tps values of the simulator.
- Enabled the SET XQ POLL to be meaningful if the simulator currently
doesn't support idling.
- Changed xq_debug_setup to use sim_debug instead of printf so that
all debug output goes to the same place.
- Restored the call to xq_svc after all successful calls to eth_write
to allow receive processing to happen before the next event
service time. This must have been inadvertently commented out
while other things were being tested.
pdp11_xu.c: (Mark Pizzolato)
- Added SHOW XU FILTERS modifier (Dave Hittner)
- Corrected SELFTEST command, enabling use by VMS 3.7, VMS 4.7, and Ultrix 1.1 (Dave Hittner)
- Added address conflict check during attach.
- Added loopback processing support
- Fixed the fact that no broadcast packets were received by the DEUNA
- Fixed transmitted packets to have the correct source MAC address.
- Fixed incorrect address filter setting calling eth_filter().
pdp18b_stddev.c:
- added clock coscheduling
- revised TTI to use clock coscheduling and to fix perpetual CAF bug
pdp18b_ttx.c:
- revised to use clock coscheduling
pdp8_clk.c:
- added clock coscheduling
pdp8_fpp.c: (Rick Murphy)
- many bug fixes; now functional
pdp8_tt.c:
- revised to use clock coscheduling and to fix perpetual CAF bug
pdp8_ttx.c:
- revised to use clock cosheduling
pdp8_sys.c:
- added link to FPP
pdp8_td.c:
- fixed SDLC to clear AC (Dave Gesswein)
sds_mt.c:
- fixed bug in scan function decode (Peter Schorn)
vax_cpu.c:
- revised idle design (Mark Pizzolato)
- fixed bug in SET CPU IDLE
- fixed failure to clear PSL<tp> in BPT, XFC
vax_cpu1.c:
- revised idle design Mark Pizzolato)
- added VEC_QMODE test in interrupt handler
vax_fpa.c:
- fixed integer overflow bug in EMODx (Camiel Vanderhoeven)
- fixed POLYx normalizing before add mask bug (Camiel Vanderhoeven)
- fixed missing arguments in 32b floating add (Mark Pizzolato)
vax_octa.c (Camiel Vanderhoeven)
- fixed integer overflow bug in EMODH
- fixed POLYH normalizing before add mask bug
vax_stddev.c:
- revised to use clock coscheduling
vax_syscm.c:
- fixed t_addr printouts for 64b big-endian systems (Mark Pizzolato)
vax_sysdev.c:
- added power clear call to boot routine (Mark Pizzolato)
vax780_sbi.c:
- added AUTORESTART switch support (Mark Pizzolato)
vax780_stddev.c
- added REBOOT support (Mark Pizzolato)
- revised to use clock coscheduling
vaxmod_def.h
- moved all Qbus devices to BR4; deleted RP definitions
V3.8 revision history
1 08-Feb-09 scp.c:
- revised RESTORE unit logic for consistency
- "detach_all" ignores error status returns if shutting down (Dave Bryan)
- DO cmd missing params now default to null string (Dave Bryan)
- DO cmd sub_args now allows "\\" to specify literal backslash (Dave Bryan)
- decommitted MTAB_VAL
- fixed implementation of MTAB_NC
- fixed warnings in help printouts
- fixed "SHOW DEVICE" with only one enabled unit (Dave Bryan)
sim_tape.c:
- fixed signed/unsigned warning in sim_tape_set_fmt (Dave Bryan)
sim_tmxr.c, sim_tmxr.h:
- added line connection order to tmxr_poll_conn,
added tmxr_set_lnorder and tmxr_show_lnorder (Dave Bryan)
- print device and line to which connection was made (Dave Bryan)
- added three new standardized SHOW routines
all terminal multiplexers:
- revised for new common SHOW routines in TMXR library
- rewrote set size routines not to use MTAB_VAL
hp2100_cpu.c (Dave Bryan):
- VIS and IOP are now mutually exclusive on 1000-F
- Removed A/B shadow register variables
- Moved hp_setdev, hp_showdev to hp2100_sys.c
- Moved non-existent memory checks to WritePW
- Fixed mp_dms_jmp to accept lower bound, check write protection
- Corrected DMS violation register set conditions
- Refefined ABORT to pass address, moved def to hp2100_cpu.h
- Combined dms and dms_io routines
- JSB to 0/1 with W5 out and fence = 0 erroneously causes MP abort
- Unified I/O slot dispatch by adding DIBs for CPU, MP, and DMA
- Rewrote device I/O to model backplane signals
- EDT no longer passes DMA channel
- Added SET CPU IDLE/NOIDLE, idle detection for DOS/RTE
- Breakpoints on interrupt trap cells now work
hp2100_cpu0.c (Dave Bryan):
- .FLUN and self-tests for VIS and SIGNAL are NOP if not present
- Moved microcode function prototypes to hp2100_cpu1.h
- Removed option-present tests (now in UIG dispatchers)
- Added "user microcode" dispatcher for unclaimed instructions
hp2100_cpu1.c (Dave Bryan):
- Moved microcode function prototypes to hp2100_cpu1.h
- Moved option-present tests to UIG dispatchers
- Call "user microcode" dispatcher for unclaimed UIG instructions
hp2100_cpu2.c (Dave Bryan):
- Moved microcode function prototypes to hp2100_cpu1.h
- Removed option-present tests (now in UIG dispatchers)
- Updated mp_dms_jmp calling sequence
- Fixed DJP, SJP, and UJP jump target validation
- RVA/B conditionally updates dms_vr before returning value
hp2100_cpu3.c (Dave Bryan):
- Moved microcode function prototypes to hp2100_cpu1.h
- Removed option-present tests (now in UIG dispatchers)
- Updated mp_dms_jmp calling sequence
hp2100_cpu4.c, hp2100_cpu7.c (Dave Bryan):
- Moved microcode function prototypes to hp2100_cpu1.h
- Removed option-present tests (now in UIG dispatchers)
hp2100_cpu5.c (Dave Bryan):
- Moved microcode function prototypes to hp2100_cpu1.h
- Removed option-present tests (now in UIG dispatchers)
- Redefined ABORT to pass address, moved def to hp2100_cpu.h
- Rewrote device I/O to model backplane signals
hp2100_cpu6.c (Dave Bryan):
- Corrected .SIP debug formatting
- Moved microcode function prototypes to hp2100_cpu1.h
- Removed option-present tests (now in UIG dispatchers)
- Rewrote device I/O to model backplane signals
hp2100 all peripherals (Dave Bryan):
- Rewrote device I/O to model backplane signals
hp2100_baci.c (Dave Bryan):
- Fixed STC,C losing interrupt request on BREAK
- Changed Telnet poll to connect immediately after reset or attach
- Added REG_FIT to register variables < 32-bit size
- Moved fmt_char() function to hp2100_sys.c
hp2100_dp.c, hp2100_dq.c (Dave Bryan):
- Added REG_FIT to register variables < 32-bit size
hp2100_dr.c (Dave Bryan):
- Revised drc_boot to use ibl_copy
hp2100_fp1.c (Dave Bryan):
- Quieted bogus gcc warning in fp_exec
hp2100_ipl.c (Dave Bryan):
- Changed socket poll to connect immediately after reset or attach
- Revised EDT handler to refine completion delay conditions
- Revised ipl_boot to use ibl_copy
hp2100_lpt.c (Dave Bryan):
- Changed CTIME register width to match documentation
hp2100_mpx.c (Dave Bryan):
- Implemented 12792C eight-channel terminal multiplexer
hp2100_ms.c (Dave Bryan):
- Revised to use AR instead of saved_AR in boot
hp2100_mt.c (Dave Bryan):
- Fixed missing flag after CLR command
- Moved write enable and format commands from MTD to MTC
hp2100_mux.c (Dave Bryan):
- SHOW MUX CONN/STAT with SET MUX DIAG is no longer disallowed
- Changed Telnet poll to connect immediately after reset or attach
- Added LINEORDER support
- Added BREAK deferral to allow RTE break-mode to work
hp2100_pif.c (Dave Bryan):
- Implemented 12620A/12936A Privileged Interrupt Fences
hp2100_sys.c (Dave Bryan):
- Fixed IAK instruction dual-use mnemonic display
- Moved hp_setdev, hp_showdev from hp2100_cpu.c
- Changed sim_load to use WritePW instead of direct M[] access
- Added PIF device
- Moved fmt_char() function from hp2100_baci.c
- Added MPX device
hp2100_cpu.h (Dave Bryan):
- Rearranged declarations with hp2100_cpu.c and hp2100_defs.h
- Added mp_control to CPU state externals
hp2100_cpu1.h (Dave Bryan):
- Moved microcode function prototypes here
hp2100_defs.h (Dave Bryan):
- Added POLL_FIRST to indicate immediate connection attempt
- Rearranged declarations with hp2100_cpu.h
- Added PIF device
- Declared fmt_char() function
- Added MPX device
i1401_cpu.c:
- fixed bug in ZA and ZS (Bob Abeles)
- fixed tape indicator implementation (Bob Abeles)
- added missing magtape modifier A (Van Snyder)
i1401_mt.c:
- added -n (no rewind) option to BOOT (Van Snyder)
- fixed bug to mask input to 6b on read (Bob Abeles)
lgp_stddev.c:
- changed encode character from # to !, due to overlap
pdp11_cpu.c:
- fixed failure to clear cpu_bme on RESET (Walter Mueller)
pdp11_dz.c:
- added MTAB_NC modifier on SET LOG command (Walter Mueller)
pdp11_io.c, vax_io.c, vax780_uba.c:
- revised to use PDP-11 I/O library
pdp11_io_lib.c:
- created common library for Unibus/Qbus support routines
pdp11_cis.c, vax_cis.c:
- fixed bug in ASHP left overflow calc (Word/NibbleLShift)
- fixed bug in DIVx (LntDstr calculation)
sds_lp.c:
- fixed loss of carriage control position on space op
vax_stddev.c, vax780_stddev.c
- modified to resync TODR on any clock reset
0 15-Jun-08 scp.c:
- fixed bug in local/global register search (Mark Pizzolato)
- fixed bug in restore of RO units (Mark Pizzolato)
- added SET/SHO/NO BR with default argument (Dave Bryan)
sim_tmxr.c
- worked around Telnet negotiation problem with QCTerm (Dave Bryan)
gri_defs.h, gri_cpu.c, gri_sys.c:
- added GRI-99 support
hp2100_baci.c (Dave Bryan):
- Implemented 12966A Buffered Asynchronous Communications Interface simulator
hp2100_cpu.c (Dave Bryan):
- Memory ex/dep and bkpt type default to current map mode
- Added SET CPU DEBUG and OS/VMA flags, enabled OS/VMA
- Corrected MP W5 (JSB) jumper action, SET/SHOW reversal,
mp_mevff clear on interrupt with I/O instruction in trap cell
- Removed DBI support from 1000-M (was temporary for RTE-6/VM)
- Enabled EMA and VIS, added EMA, VIS, and SIGNAL debug flags
- Enabled SIGNAL instructions, SIG debug flag
- Fixed single stepping through interrupts
hp2100_cpu0.c (Dave Bryan and Holger Veit):
- Removed and implemented "cpu_rte_vma" and "cpu_rte_os"
- Removed and implemented "cpu_vis" and "cpu_signal"
- Removed and implemented "cpu_rte_ema"
hp2100_cpu1.c (Dave Bryan):
- Added fprint_ops, fprint_regs for debug printouts
- Enabled DIAG as NOP on 1000 F-Series
- Fixed VIS and SIGNAL to depend on the FPP and HAVE_INT64
hp2100_cpu3.c (Dave Bryan):
- Fixed unsigned divide bug in .DDI
- Fixed unsigned multiply bug in .DMP
- Added implementation of DBI self-test
hp2100_cpu4.c (Dave Bryan):
- Fixed B register return bug in /CMRT
hp2100_cpu5.c (Holger Veit):
- Implemented RTE-6/VM Virtual Memory Area firmware
- Implemented RTE-IV Extended Memory Area firmware
hp2100_cpu6.c (Dave Bryan):
- Implemented RTE-6/VM OS accelerator firmware
hp2100_cpu7.c (Holger Veit):
- Implemented Vector Instruction Set and SIGNAL/1000 firmware
hp2100_ds.c (Dave Bryan):
- Corrected and verified ioCRS action
- Corrected DPTR register definition from FLDATA to DRDATA
hp2100_fp.c (Mark Pizzolato)
- Corrected fp_unpack mantissa high-word return
hp2100_fp1.c (Dave Bryan):
- Reworked "complement" to avoid inlining bug in gcc-4.x
- Fixed uninitialized return in fp_accum when setting
hp2100_mux.c (Dave Bryan):
- Sync mux poll with console poll for idle compatibility
hp2100_stddev.c (Dave Bryan):
- Fixed PTR trailing null counter for tape re-read
- Added IPTICK register to CLK to display CPU instr/tick
- Corrected and verified ioCRS actions
- Changed TTY console poll to 10 msec. real time
- Synchronized CLK with TTY if set for 10 msec.
- Added UNIT_IDLE to TTY and CLK
- Removed redundant control char handling definitions
- Changed TTY output wait from 100 to 200 for MSU BASIC
hp2100_sys.c (Dave Bryan):
- Added BACI device
- Added RTE OS/VMA/EMA mnemonics
- Changed fprint_sym to handle step with irq pending
hp2100_cpu.h (Dave Bryan):
- Added calc_defer() prototype
- Added extern sim_deb, cpu_dev, DEB flags for debug printouts
- Added extern intaddr, mp_viol, mp_mevff, calc_int, dev_ctl,
ReadIO, WriteIO for RTE-6/VM microcode support
hp2100_cpu1.h (Dave Bryan):
- Corrected OP_AFF to OP_AAFF for SIGNAL/1000
- Removed unused operand patterns
- Added fprint_ops, fprint_regs for debug printouts
- Revised OP_KKKAKK operand profile to OP_CCCACC for $LOC
hp2100_defs.h (Dave Bryan):
- Added BACI device
- Added 16/32-bit unsigned-to-signed conversions
- Changed TMR_MUX to TMR_POLL for idle support
- Added POLLMODE, sync_poll() declaration
- Added I_MRG, I_ISZ, I_IOG, I_STF, and I_SFS instruction masks
- Added I_MRG_I, I_JSB, I_JSB_I, and I_JMP instruction masks
nova_defs.h (Bruce Ray):
- added support for third-party 64KW memory
nova_clk.c (Bruce Ray):
- renamed to RTC, to match DG literature
nova_cpu.c (Bruce Ray):
- added support for third-party 64KW memory
- added Nova 3 "secret" instructions
- added CPU history support
nova_dkp.c (Bruce Ray):
- renamed to DKP, to match DG literature
- fixed numerous bugs in both documented and undocumented behavior
- changed bootstrap code to DG official sequence
nova_dsk.c (Bruce Ray):
- renamed to DSK, to match DG literature
- added support for undocumented behavior
- changed bootstrap code to DG official sequence
nova_mta.c (Bruce Ray):
- renamed to MTA, to match DG literature
- changed bootstrap code to DG official sequence
nova_plt.c, nova_pt.c (Bruce Ray):
- added 7B/8B support
nova_sys.c (Bruce Ray):
- fixed mistaken instruction mnemonics
pdp11_cpu.c, pdp11_io.c, pdp11_rh.c:
- fixed DMA memory address limit test (John Dundas)
- fixed MMR0 treatment in RESET (Walter Mueller)
pdp11_cpumod.h, pdp11_cpumod.c:
- fixed write behavior of 11/70 MBRK, LOSIZE, HISIZE (Walter Mueller)
- added support to set default state of KDJ11B,E clock control register
pdp11_dc.c:
- added support for DC11
pdp11_defs.h:
- added KE, KG, RC, DC support
- renamed DL11 devices
pdp11_dl.c:
- renamed devices to DLI/DLO, to match DC11
- added modem control
pdp11_io.c:
- added autoconfigure support for DC11
pdp11_ke.c:
- added support for KE11A
pdp11_kg.c (John Dundas):
- added support for KG11A
pdp11_rc.c (John Dundas):
- added support for RC11
pdp11_sys.c:
- modified to allow -A, -B use with 8b devices
- added KE, KG, RC, DC support
- renamed DL11 devices
vax_cmode.c, vax_io.c, vax780_uba.c:
- fixed declarations (Mark Pizzolato)
V3.7 revision history
3 02-Sep-07 scp.c:
- fixed bug in SET THROTTLE command
pdp10_cpu.c:
- fixed non-portable usage in SHOW HISTORY routine
pdp11_ta.c:
- forward op at BOT skips initial file gap
pdp8_ct.c:
- forward op at BOT skips initial file gap
- fixed handling of BEOT
vax_cpu.c:
- fixed bug in read access g-format indexed specifiers
2 12-Jul-07 sim_ether.c (Dave Hittner):
- fixed non-ethernet device removal loop (Naoki Hamada)
- added dynamic loading of wpcap.dll;
- corrected exceed max index bug in ethX lookup
- corrected failure to look up ethernet device names in
the registry on Windows XP x64
sim_timer.c:
- fixed idle timer event selection algorithm
h316_lp.c:
- fixed loss of last print line (Theo Engel)
h316_mt.c:
- fixed bug in write without stop (Theo Engel)
h316_stddev.c:
- fixed bug in clock increment (Theo Engel)
i1401_cpu.c:
- added recognition of overlapped operation modifiers
- remove restriction on load-mode binary tape operations
i1401_mt.c:
- fixed read tape mark operation (Van Snyder)
- remove restriction on load-mode binary tape operations
pdp1_cpu.c:
- fixed typo in SBS clear (Norm Lastovica)
pdp11_rh.c, pdp11_rp.c, pdp11_tu.c:
- CS1 DVA is in the device, not the MBA
pdp8_ct.c:
- fixed typo (Norm Lastovica)
vax_cpu.c:
- revised idle detector
1 14-May-07 scp.c:
- modified sim_instr invocation to call sim_rtcn_init_all
- fixed bug in get_sim_opt (reported by Don North)
- fixed bug in RESTORE with changed memory size
- added global 'RESTORE in progress' flag
- fixed breakpoint actions in DO command file processing
(Dave Bryan)
all CPU's with clocks:
- removed clock initialization (now done in SCP)
hp2100_cpu.c (Dave Bryan):
- EDT passes input flag and DMA channel in dat parameter
hp2100_ipl.c (Dave Bryan):
- IPLI EDT delays DMA completion interrupt for TSB
hp2100_mux.c (Dave Bryan):
- corrected "mux_sta" size from 16 to 21 elements
- fixed "muxc_reset" to clear lines 16-20
- fixed control card OTx to set current channel number
- fixed to set "muxl_ibuf" in response to a transmit interrupt
- changed "mux_xbuf", "mux_rbuf" declarations from 8 to 16 bits
- fixed to set "mux_rchp" when a line break is received
- fixed incorrect "odd_par" table values
- reversed test in "RCV_PAR" to return "LIL_PAR" on odd parity
- rixed mux reset (ioCRS) to clear port parameters
- fixed to use PUT_DCH instead of PUT_CCH for data channel status
- added DIAG/TERM modifiers to implement diagnostic mode
pdp11_cpumod.c:
- changed memory size routine to work with RESTORE
pdp11_hk.c:
- NOP and DCLR (at least) do not check drive type
- MR2 and MR3 only updated on NOP
pdp10_tu.c, pdp11_tu.c:
- TMK sets FCE only on read (Naoki Hamada)
pdp11_xu.c:
- added missing FC_RMAL command
- cleared multicast on write
vax_moddefs.h, vax_cpu1.c:
- separated PxBR and SBR mbz checks
vax780_defs.h
- separated PxBR and SBR mbz checks
- modified mbz checks to reflect 780 microcode patches
(Naoki Hamada)
vax_mmu.c:
- added address masking to all SBR-based memory reads
0 30-Jan-07 scp.c:
- implemented throttle commands
- added -e to control error processing in DO command files
(Dave Bryan)
sim_console.c:
- fixed handling of non-printable characters in KSR mode
sim_tape.c:
- fixed bug in reverse operations for P7B-format tapes
- fixed bug in reverse operations across erase gaps
sim_timer.c:
- added throttle support
- added idle support (based on work by Mark Pizzolato)
gri_stddev.c, h316_stddev.c, pdp18b_tt1.c
- fixed handling of non-printable characters in KSR mode
hp2100_cpu.c, hp2100_cpu0.c, hp2100_cpu1.c, hp2100_cpu2.c,
hp2100_cpu3.c, hp2100_cpu4.c (Dave Bryan):
- reorganized CPU modules for easier addition of new instructions
- added Double Integer instructions, 1000-F CPU, 2114 and
2115 CPUs, 12K and 24K memory sizes, 12607B and 12578A DMA
controllers, and 21xx binary loader protection
- fixed DMS self-test instruction execution on 1000-M
- fixed indirect interrupt holdoff logic
hp2100_ds.c:
- fixed REQUEST STATUS to clear status-1 (Dave Bryan)
hp2100_fp1.c:
- Added Floating Point Processor (Dave Bryan)
hp2100_lps.c:
- fixed diag-mode CLC response
i7094_cpu.c:
- fixed new bug in halt IO wait loop
- added IFT, EFT expanded core test instructions
id16_cpu.c, id32_cpu.c:
- removed separate multiplexor clock
- added idle support
id_pas.c:
- synced multiplexor poll to real-time clock
id_tt.c, id_ttp.c:
- fixed handling of non-printable characters in KSR mode
- synced keyboard poll to real-time clock
id_uvc.c:
- changed line-time clock to be free-running
pdp1_cpu.c:
- added 16-channel sequence break system (API) support
- added PDP-1D support
pdp1_clk.c:
- first release
pdp1_dcs.c:
- first release
pdp1_stddev.c:
- separated TTI, TTO for API support
pdp1_sys.c:
- added PDP-1D, 16-channel SBS, clock, DCS support
- fixed bugs in character input, block loader
pdp10_cpu.c:
- added idle support
pdp10_defs.h, pdp10_sys.c:
- added CR support
pdp10_fe.c, pdp10_tim.c:
- synced keyboard poll to real-time clock
pdp11_cr.c:
- revised for PDP-10 compatibility (CD11 only)
pdp11_cpu.c:
- added idle support
- fixed bug in ASH -32 C value
pdp11_rf.c:
- fixed unit mask (John Dundas)
pdp11_stddev.c, vax_stddev.c, vax780_stddev.c:
- synced keyboard poll to real-time clock
- added clock coscheduling support
pdp11_ta.c:
- first release
pdp11_vh.c:
- synced service poll to real-time clock
- changed device to be off by default
pdp11_dz.c, pdp11_xq.c, pdp11_xu.c:
- synced service poll to real-time clock
pdp11_sys.c:
- fixed operand order in EIS instructions (W.F.J. Mueller)
- added TA11 support
pdp18b_cpu.c:
- fixed incorrect value of PC on instruction fetch mem mmgt error
- fixed PDP-15 handling of mem mmgt traps (sets API 3)
- fixed PDP-15 handling of CAL API 4 (sets only if 0-3 inactive)
- fixed PDP-15 CAF to clear memory management mode register
- fixed boundary test in KT15/XVM (reported by Andrew Warkentin)
- added XVM RDCLK instruction
- added idle support and infinite loop detection
pdp18b_rf.c:
- fixed bug, DSCD does not clear function register
pdp18b_stddev.c:
- added PDP-15 program-selectable duplex handling instruction
- fixed PDP-15 handling of reader out-of-tape
- fixed handling of non-printable characters in KSR mode
- added XVM RDCLK instruction
- changed real-time clock to be free running
- synced keyboard poll to real-time clock
pdp18b_tt1.c
- fixed handling of non-printable characters in KSR mode
pdp18b_sys.c:
- added XVM RDCLK instruction
pdp8_cpu.c:
- fixed SC value after DVI overflow (Don North)
- added idle support and infinite loop detection
pdp8_ct.c:
- first release
pdp8_clk.c:
- changed real-time clock to be free running
pdp8_sys.c:
- added TA8E support
- added ability to disambiguate overlapping IOT definitions
pdp8_tt.c:
- fixed handling of non-printable characters in KSR mode
- synced keyboard poll to real-time clock
vax_cpu.c, vax_cpu1.c:
- added idle support
vax_syscm.c:
- fixed operand order in EIS instructions (W.F.J. Mueller)
V3.6 revision history
1 25-Jul-06 sim_console.c:
- implemented SET/SHOW PCHAR
all DECtapes:
- fixed conflict in ATTACH switches
hp2100_ms.c (Dave Bryan):
- added CAPACITY as alternate for REEL
- fixed EOT test for unlimited reel size
i1620_cd.c (Tom McBride):
- fixed card reader fgets call
- fixed card reader boot sequence
i7094_cd.c:
- fixed problem with 80 column full cards
i7094_cpu.c:
- fixed bug in halt IO wait loop
i7094_sys.c:
- added binary loader (courtesy of Dave Pitt)
pdp1_cpu.c:
- fixed bugs in MUS and DIV
pdp11_cis.c:
- added interrupt tests to character instructions
- added 11/44 stack probe test to MOVCx (only)
pdp11_dl.c:
- first release
pdp11_rf.c:
- first release
pdp11_stddev.c:
- added UC support to TTI, TTO
pdp18b_cpu.c:
- fixed RESET to clear AC, L, and MQ
pdp18b_dt.c:
- fixed checksum calculation bug for Type 550
pdp18b_fpp.c:
- fixed bugs in left shift, multiply
pdp18b_stddev.c:
- fixed Baudot letters/figures inversion for PDP-4
- fixed letters/figures tracking for PDP-4
- fixed PDP-4/PDP-7 default terminal to be local echo
pdp18b_sys.c:
- added Fiodec, Baudot display
- generalized LOAD to handle HRI, RIM, and BIN files
pdp8_ttx.c:
- fixed bug in DETACH routine
0 15-May-06 scp.c:
- revised save file format to save options, unit capacity
sim_tape.c, sim_tape.h:
- added support for finite reel size
- fixed bug in P7B write record
most magtapes:
- added support for finite reel size
h316_cpu.c: fixed bugs in LLL, LRL (Theo Engel)
h316_lp.c: fixed bug in blanks backscanning (Theo Engel)
h316_stddev.c: fixed bugs in punch state handling (Theo Engel)
i1401_cpu.c: fixed bug in divide (reported by Van Snyder)
i16_cpu.c: fixed bug in DH (Mark Hittinger)
i32_cpu.c:
- fixed bug in DH (Mark Hittinger)
- added support for 8 register banks in 8/32
i7094: first release
id_io.c: fixed bug, GO preserves EXA and SSTA (Davis Johnson)
id_idc.c:
- fixed WD/WH handling (Davis Johnson)
- fixed bug, nop command should be ignored (Davis Johnson)
nova_cpu.c: fixed bug in DIVS (Mark Hittinger)
pdp11_cis.c: (all reported by John Dundas)
- fixed bug in decode table
- fixed bug in ASHP
- fixed bug in write decimal string with mmgt enabled
- fixed bug in 0-length strings in multiply/divide
pdp11_cpu.c: fixed order of operand fetching in XOR for SDSD models
pdp11_cr.c: added CR11/CD11 support
pdp11_tc.c:
- fixed READ to set extended data bits in TCST (Alan Frisbie)
vax780_fload.c: added FLOAD command
vax780_sbi.c: fixed writes to ACCS
vax780_stddev.c: revised timer logic for EVKAE (reported by Tim Stark)
vax_cis.c: (all reported by Tim Stark)
- fixed MOVTC, MOVTUC to preserve cc's through page faults
- fixed MOVTUC to stop on translated == escape
- fixed CVTPL to set registers before destination reg write
- fixed CVTPL to set correct cc bit on overflow
- fixed EDITPC to preserve cc's through page faults
- fixed EDITPC EO$BLANK_ZERO count, cc test
- fixed EDITPC EO$INSERT to insert fill instead of blank
- fixed EDITPC EO$LOAD_PLUS/MINUS to skip character
vax_cpu.c:
- added KESU capability to virtual examine
- fixed bugs in virtual examine
- rewrote CPU history function for improved usability
(bugs below reported by Tim Stark)
- fixed fault cleanup to clear PSL<tp>
- fixed ADAWI r-mode to preserve dst<31:16>
- fixed ACBD/G to test correct operand
- fixed access checking on modify-class specifiers
- fixed branch address calculation in CPU history
- fixed bug in reported VA on faulting cross-page write
vax_cpu1.c: (all reported by Tim Stark)
- added access check on system PTE for 11/780
- added mbz check in LDPCTX for 11/780
vax_cmode.c: (all reported by Tim Stark)
- fixed omission of SXT
- fixed order of operand fetching in XOR
vax_fpa.c: (all reported by Tim Stark)
- fixed POLYD, POLYG to clear R4, R5
- fixed POLYD, POLYG to set R3 correctly
- fixed POLYD, POLYG to not exit prematurely if arg = 0
- fixed POLYD, POLYG to do full 64b multiply
- fixed POLYF, POLYD, POLYG to remove truncation on add
- fixed POLYF, POLYD, POLYG to mask mul reslt to 31b/63b/63b
- fixed fp add routine to test for zero via fraction
to support "denormal" argument from POLYF, POLYD, POLYG
- fixed bug in 32b floating multiply routine
- fixed bug in 64b extended modulus routine
vax_mmu.c:
- added access check on system PTE for 11/780
vax_octa.c: (all reported by Tim Stark)
- fixed MNEGH to test negated sign, clear C
- fixed carry propagation in qp_inc, qp_neg, qp_add
- fixed pack routines to test for zero via fraction
- fixed ACBH to set cc's on result
- fixed POLYH to set R3 correctly
- fixed POLYH to not exit prematurely if arg = 0
- fixed POLYH to mask mul reslt to 127b
- fixed fp add routine to test for zero via fraction
to support "denormal" argument from POLYH
- fixed EMODH to concatenate 15b of 16b extension
- fixed bug in reported VA on faulting cross-page write
V3.5 revision history
patch date module(s) and fix(es)
2 07-Jan-06 scp.c:
- added breakpoint spaces
- added REG_FIT support
sim_console.c: added ASCII character processing routines
sim_tape.c, sim_tape.h:
- added write support for P7B format
- fixed bug in write forward (Dave Bryan)
h316_stddev.c, hp2100_stddev.c, hp2100_mux.c, id_tt.c,
id_ttp.c, id_pas.c, pdp8_tt.c, pdp8_ttx.c, pdp11_stddev.c,
pdp11_dz.c, pdp18b_stddev.c, pdp18b_tt1.c, vax_stddev,
gri_stddev.c:
- revised to support new character handling routines
pdp10_rp.c: fixed DCLR not to clear disk address
pdp11_hk.c: fixed overlapped seek interaction with NOP, etc
pdp11_rh.c: added enable/disable routine
pdp11_rq.c, pdp11_tm.c, pdp11_tq.c, pdp11_ts.c
- widened address display to 64b when USE_ADDR64
pdp11_rp.c:
- fixed DCLR not to clear disk address
- fixed device enable/disable logic to include Massbus adapter
- widened address display to 64b when USE_ADDR64
pdp11_tu.c:
- fixed device enable/disable logic to include Massbus adapter
- widened address display to 64b when USE_ADDR64
- changed default adapter to TM03 (for VMS)
pdp8_df.c, pdp8_dt.c, pdp8_rf.c:
- fixed unaligned access bug (Doug Carman)
pdp8_rl.c: fixed IOT 61 decoding bug (David Gesswein)
vax_cpu.c:
- fixed breakpoint detection when USE_ADDR64 option is active
- fixed CVTfi to trap on integer overflow if PSW<iv> set
1 15-Oct-05 All CPU's, other sources: fixed declaration inconsistencies
(Sterling Garwood)
i1401_cpu.c: added control for old/new character encodings
i1401_cd.c, i1401_lpt.c, i1401_tty.c:
- changed character encodings to be consistent with 7094
- changed column binary format to be consistent with 7094
- added choice of business or Fortran set for output encoding
i1401_sys.c: changed WM character to ` under new encodings
i1620_cd.c, i1620_lpt.c, i1620_tty.c:
- changed character encodings to be consistent with 7094
pdp10_cpu.c: changed MOVNI to eliminate gcc warning
pdp11_io.c: fixed bug in autoconfiguration (missing XU)
vax_io.c: fixed bug in autoconfiguration (missing XU)
vax_fpa.c: fixed bug in 32b structure definitions (Jason Stevens)
0 1-Sep-05 Note: most source modules have been edited to improve
readability and to fix declaration and cast problems in C++
all instruction histories: fixed reversed arguments to calloc
scp.c: revised to trim trailing spaces on file inputs
sim_sock.c: fixed SIGPIPE error on Unix
sim_ether.c: added Windows user-defined adapter names (Timothe Litt)
sim_tape.c: fixed misallocation of TPC map array
sim_tmxr.c: added support for SET <unit> DISCONNECT
hp2100_mux.c: added SET MUXLn DISCONNECT
i1401_cpu.c:
- fixed SSB-SSG clearing on RESET (reported by Ralph Reinke)
- removed error stops in MCE
i1401_cd.c: fixed read, punch to ignore modifier on 1, 4 char inst
(reported by Van Snyder)
id_pas.c:
- fixed bug in SHOW CONN/STATS
- added SET PASLn DISCONNECT
pdp10_ksio.c: revised for new autoconfiguration interface
pdp11_cpu.c: replaced WAIT clock queue check with API call
pdp11_cpumod.c: added additional 11/60 registers
pdp11_io.c: revised autoconfiguration algorithm and interface
pdp11_dz.c: revised for new autoconfiguration interface
pdp11_vh.c:
- revised for new autoconfiguration interface
- fixed bug in vector display routine
pdp11_xu.c: fixed runt packet processing (Tim Chapman)
pdp18b_cpu.c, pdp18b_sys.c:
- removed spurious AAS instruction
pdp18b_tt1.c:
- fixed bug in SHOW CONN/STATS
- fixed bug in SET LOG/NOLOG
- added SET TTOXn DISCONNECT
pdp8_ttx.c:
- fixed bug in SHOW CONN/STATS
- fixed bug in SET LOG/NOLOG
- added SET TTOXn DISCONNECT
sds_mux.c:
- fixed bug in SHOW CONN/STATS
- added SET MUXLn DISCONNECT
vaxmod_defs.h: added QDSS support
vax_io.c: revised autoconfiguration algorithm and interface
V3.4 revision history
0 01-May-04 scp.c:
- fixed ASSERT code
- revised syntax for SET DEBUG (Dave Bryan)
- revised interpretation of fprint_sym, fparse_sym returns
- moved DETACH sanity tests into detach_unit
sim_sock.h and sim_sock.c:
- added test for WSAEINPROGRESS (Tim Riker)
many: revised detach routines to test for attached state
hp2100_cpu.c: reorganized CPU options (Dave Bryan)
hp2100_cpu1.c: reorganized EIG routines (Dave Bryan)
hp2100_fp1.c: added FFP support (Dave Bryan)
id16_cpu.c:
- fixed bug in show history routine (Mark Hittinger)
- revised examine/deposit to do words rather than bytes
id32_cpu.c:
- fixed bug in initial memory allocation
- fixed bug in show history routine (Mark Hittinger)
- revised examine/deposit to do words rather than bytes
id16_sys.c, id32_sys:
- revised examine/deposit to do words rather than bytes
pdp10_tu.c:
- fixed bug, ERASE and WREOF should not clear done (reported
by Rich Alderson)
- fixed error reporting
pdp11_tu.c: fixed error reporting
V3.3 revision history
2 08-Mar-05 scp.c: added ASSERT command (Dave Bryan)
h316_defs.h: fixed IORETURN macro
h316_mt.c: fixed error reporting from OCP (Philipp Hachtmann)
h316_stddev.c: fixed bug in OCP '0001 (Philipp Hachtmann)
hp2100_cpu.c: split out EAU and MAC instructions
hp2100_cpu1.c: (Dave Bryan)
- fixed missing MPCK on JRS target
- removed EXECUTE instruction (is NOP in actual microcode)
hp2100_fp: (Dave Bryan)
- fixed missing negative overflow renorm in StoreFP
i1401_lp.c: fixed bug in write_line (reported by Van Snyder)
id32_cpu.c: fixed branches to mask new PC (Greg Johnson)
pdp11_cpu.c: fixed bugs in RESET for 11/70 (reported by Tim Chapman)
pdp11_cpumod.c:
- fixed bug in SHOW MODEL (Sergey Okhapkin)
- made SYSID variable for 11/70 (Tim Chapman)
- added MBRK write case for 11/70 (Tim Chapman)
pdp11_rq: added RA60, RA71, RA81 disks
pdp11_ry: fixed bug in boot code (reported by Graham Toal)
vax_cpu.c: fixed initial state of cpu_extmem
1 05-Jan-05 h316_cpu.c: fixed bug in DIV
h316_stddev.c:
- fixed bug in SKS '104 (reported by Philipp Hachtmann)
- fixed bug in SKS '504
- adder reader/punch ASCII file support
- added Teletype reader/punch support
h316_dp.c: fixed bug in skip on !seeking
h316_mt.c: fixed bug in DMA/DMC support
h316_lp.c: fixed bug in DMA/DMC support
hp2100_cpu.c:
- fixed DMA reset to clear alternate CTL flop (Dave Bryan)
- fixed DMA reset to not clear control words (Dave Bryan)
- fixed SBS, CBS, TBS to do virtual reads
- separated A/B from M[0/1], for DMA IO (Dave Bryan)
- added SET CPU 21MX-M, 21MX-E (Dave Brian)
- disabled TIMER/EXECUTE/DIAG instructions for 21MX-M (Dave Bryan)
- added post-processor to maintain T/M consistency (Dave Bryan)
hp2100_ds.c: first release
hp2100_lps.c (all changes from Dave Bryan)
- added restart when set online, etc.
- fixed col count for non-printing chars
hp2100_lpt.c (all changes from Dave Bryan)
- added restart when set online, etc.
hp2100_sys.c (all changes from Dave Bryan):
- added STOP_OFFLINE, STOP_PWROFF messages
i1401_sys.c: added address argument support (Van Snyder)
id_mt.c: added read-only file support
lgp_cpu.c, lgp_sys.c: modified VM pointer setup
pdp11_cpu.c: fixed WAIT to work in all modes (John Dundas)
pdp11_tm.c, pdp11_ts.c: added read-only file support
sds_mt.c: added read-only file support
0 23-Nov-04 scp.c:
- added reset_all_p (powerup)
- fixed comma-separated SET options (Dave Bryan)
- changed ONLINE/OFFLINE to ENABLED/DISABLED (Dave Bryan)
- modified to flush device buffers on stop (Dave Bryan)
- changed HELP to suppress duplicate command displays
sim_console.c:
- moved SET/SHOW DEBUG under CONSOLE hierarchy
hp2100_cpu.c: (all fixes by Dave Bryan)
- moved MP into its own device; added MP option jumpers
- modified DMA to allow disabling
- modified SET CPU 2100/2116 to truncate memory > 32K
- added -F switch to SET CPU to force memory truncation
- fixed S-register behavior on 2116
- fixed LIx/MIx behavior for DMA on 2116 and 2100
- fixed LIx/MIx behavior for empty I/O card slots
- modified WRU to be REG_HRO
- added BRK and DEL to save console settings
- fixed use of "unsigned int16" in cpu_reset
hp2100_dp.c: (all fixes by Dave Bryan)
- fixed enable/disable from either device
- fixed ANY ERROR status for 12557A interface
- fixed unattached drive status for 12557A interface
- status cmd without prior STC DC now completes (12557A)
- OTA/OTB CC on 13210A interface also does CLC CC
- fixed RAR model
- fixed seek check on 13210 if sector out of range
hp2100_dq.c: (all fixes by Dave Bryan)
- fixed enable/disable from either device
- shortened xtime from 5 to 3 (drive avg 156KW/second)
- fixed not ready/any error status
- fixed RAR model
hp2100_dr.c: (all fixes by Dave Bryan)
- fixed enable/disable from either device
- fixed sector return in status word
- provided protected tracks and "Writing Enabled" status bit
- fixed DMA last word write, incomplete sector fill value
- added "parity error" status return on writes for 12606
- added track origin test for 12606
- added SCP test for 12606
- fixed 12610 SFC operation
- added "Sector Flag" status bit
- added "Read Inhibit" status bit for 12606
- fixed current-sector determination
- added TRACKPROT modifier
hp2100_ipl.c, hp2100_ms.c: (all fixes by Dave Bryan)
- fixed enable/disable from either device
hp2100_lps.c: (all fixes by Dave Bryan)
- added SET OFFLINE/ONLINE, POWEROFF/POWERON
- fixed status returns for error conditions
- fixed handling of non-printing characters
- fixed handling of characters after column 80
- improved timing model accuracy for RTE
- added fast/realistic timing
- added debug printouts
hp2100_lpt.c: (all fixes by Dave Bryan)
- added SET OFFLINE/ONLINE, POWEROFF/POWERON
- fixed status returns for error conditions
- fixed TOF handling so form remains on line 0
hp2100_stddev.c (all fixes by Dave Bryan)
- added paper tape loop mode, DIAG/READER modifiers to PTR
- added PV_LEFT to PTR TRLLIM register
- modified CLK to permit disable
hp2100_sys.c: (all fixes by Dave Bryan)
- added memory protect device
- fixed display of CCA/CCB/CCE instructions
i1401_cpu.c: added =n to SHOW HISTORY
id16_cpu.c: added instruction history
id32_cpu.c: added =n to SHOW HISTORY
pdp10_defs.h: revised Unibus DMA API's
pdp10_ksio.c: revised Unibus DMA API's
pdp10_lp20.c: revised Unibus DMA API's
pdp10_rp.c: replicated register state per drive
pdp10_tu.c:
- fixed to set FCE on short record
- fixed to return bit<15> in drive type
- fixed format specification, 1:0 are don't cares
- implemented write check
- TMK is cleared by new motion command, not DCLR
- DONE is set on data transfers, ATA on non data transfers
pdp11_defs.h:
- revised Unibus/Qbus DMA API's
- added CPU type and options flags
pdp11_cpumod.h, pdp11_cpumod.c:
- new routines for setting CPU type and options
pdp11_io.c: revised Unibus/Qbus DMA API's
all PDP-11 DMA peripherals:
- revised Unibus/Qbus DMA API's
pdp11_hk.c: CS2 OR must be zero for M+
pdp11_rh.c, pdp11_rp.c, pdp11_tu.c:
- split Massbus adapter from controllers
- replicated RP register state per drive
- added TM02/TM03 with TE16/TU45/TU77 drives
pdp11_rq.c, pdp11_tq.c:
- provided different default timing for PDP-11, VAX
- revised to report CPU bus type in stage 1
- revised to report controller type reflecting bus type
- added -L switch (LBNs) to RAUSER size specification
pdp15_cpu.c: added =n to SHOW HISTORY
pdp15_fpp.c:
- fixed URFST to mask low 9b of fraction
- fixed exception PC setting
pdp8_cpu.c: added =n to SHOW HISTORY
vax_defs.h:
- added octaword, compatibility mode support
vax_moddefs.h:
- revised Unibus/Qbus DMA API's
vax_cpu.c:
- moved processor-specific code to vax_sysdev.c
- added =n to SHOW HISTORY
vax_cpu1.c:
- moved processor-specific IPR's to vax_sysdev.c
- moved emulation trap to vax_cis.c
- added support for compatibility mode
vax_cis.c: new full VAX CIS instruction emulator
vax_octa.c: new full VAX octaword and h_floating instruction emulator
vax_cmode.c: new full VAX compatibility mode instruction emulator
vax_io.c:
- revised Unibus/Qbus DMA API's
vax_io.c, vax_stddev.c, vax_sysdev.c:
- integrated powerup into RESET (with -p)
vax_sys.c:
- fixed bugs in parsing indirect displacement modes
- fixed bugs in displaying and parsing character data
vax_syscm.c: added display and parse for compatibility mode
vax_syslist.c:
- split from vax_sys.c
- removed PTR, PTP
V3.2 revision history
3 03-Sep-04 scp.c:
- added ECHO command (Dave Bryan)
- qualified RESTORE detach with SIM_SW_REST
sim_console: added OS/2 EMX fixes (Holger Veit)
sim_sock.h: added missing definition for OS/2 (Holger Veit)
hp2100_cpu.c: changed error stops to report PC not PC + 1
(Dave Bryan)
hp2100_dp.c: functional and timing fixes (Dave Bryan)
- controller sets ATN for all commands except read status
- controller resumes polling for ATN interrupts after read status
- check status on unattached drive set busy and not ready
- check status tests wrong unit for write protect status
- drive on line sets ATN, will set FLG if polling
hp2100_dr.c: fixed CLC to stop operation (Dave Bryan)
hp2100_ms.c: functional and timing fixes (Dave Bryan)
- fixed erroneous execution of rejected command
- fixed erroneous execution of select-only command
- fixed erroneous execution of clear command
- fixed odd byte handling for read
- fixed spurious odd byte status on 13183A EOF
- modified handling of end of medium
- added detailed timing, with fast and realistic modes
- added reel sizes to simulate end of tape
- added debug printouts
hp2100_mt.c: modified handling of end of medium (Dave Bryan)
hp2100_stddev.c: added tab to control char set (Dave Bryan)
pdp11_rq.c: VAX controllers luns start at 0 (Andreas Cejna)
vax_cpu.c: fixed bug in EMODD/G, second word of quad dst not probed
2 17-Jul-04 scp.c: fixed problem ATTACHing to read only files
(John Dundas)
sim_console.c: revised Windows console code (Dave Bryan)
sim_fio.c: fixed problem in big-endian read
(reported by Scott Bailey)
gri_cpu.c: updated MSR, EAO functions
hp_stddev.c: generalized handling of control char echoing
(Dave Bryan)
vax_sys.c: fixed bad block initialization routine
1 10-Jul-04 scp.c: added SET/SHOW CONSOLE subhierarchy
hp2100_cpu.c: fixes and added features (Dave Bryan)
- SBT increments B after store
- DMS console map must check dms_enb
- SFS x,C and SFC x,C work
- MP violation clears automatically on interrupt
- SFS/SFC 5 is not gated by protection enabled
- DMS enable does not disable mem prot checks
- DMS status inconsistent at simulator halt
- Examine/deposit are checking wrong addresses
- Physical addresses are 20b not 15b
- Revised DMS to use memory rather than internal format
- Added instruction printout to HALT message
- Added M and T internal registers
- Added N, S, and U breakpoints
Revised IBL facility to conform to microcode
Added DMA EDT I/O pseudo-opcode
Separated DMA SRQ (service request) from FLG
all HP2100 peripherals:
- revised to make SFS x,C and SFC x,C work
- revised to separate SRQ from FLG
all HP2100 IBL bootable peripherals:
- revised boot ROMs to use IBL facility
- revised SR values to preserve SR<5:3>
hp2100_lps.c, hp2100_lpt.c: fixed timing
hp2100_dp.c: fixed interpretation of SR<0>
hp2100_dr.c: revised boot code to use IBL algorithm
hp2100_mt.c, hp2100_ms.c: fixed spurious timing error after CLC
(Dave Bryan)
hp2100_stddev.c:
- fixed input behavior during typeout for RTE-IV
- suppressed nulls on TTY output for RTE-IV
hp2100_sys.c: added SFS x,C and SFC x,C to print/parse routines
pdp10_fe.c, pdp11_stddev.c, pdp18b_stddev.c, pdp8_tt.c, vax_stddev.c:
- removed SET TTI CTRL-C option
pdp11_tq.c:
- fixed bug in reporting write protect (reported by Lyle Bickley)
- fixed TK70 model number and media ID (Robert Schaffrath)
pdp11_vh.c: added DHQ11 support (John Dundas)
pdp11_io.c, vax_io.c: fixed DHQ11 autoconfigure (John Dundas)
pdp11_sys.c, vax_sys.c: added DHQ11 support (John Dundas)
vax_cpu.c: fixed bug in DIVBx, DIVWx (reported by Peter Trimmel)
0 04-Apr-04 scp.c:
- added sim_vm_parse_addr and sim_vm_fprint_addr
- added REG_VMAD
- moved console logging to SCP
- changed sim_fsize to use descriptor rather than name
- added global device/unit show modifiers
- added device debug support (Dave Hittner)
- moved device and unit flags, updated save format
sim_ether.c:
- further generalizations (Dave Hittner, Mark Pizzolato)
sim_tmxr.h, sim_tmxr.c:
- added tmxr_linemsg
- changed TMXR definition to support variable number of lines
sim_libraries:
- new console library (sim_console.h, sim_console.c)
- new file I/O library (sim_fio.h, sim_fio.c)
- new timer library (sim_timer.h, sim_timer.c)
all terminal multiplexors: revised for tmxr library changes
all DECtapes:
- added STOP_EOR to enable end-of-reel stop
- revised for device debug support
all variable-sized devices: revised for sim_fsize change
eclipse_cpu.c, nova_cpu.c: fixed device enable/disable support
(Bruce Ray)
nova_defs.h, nova_sys.c, nova_qty.c:
- added QTY and ALM support (Bruce Ray)
id32_cpu.c, id_dp.c: revised for device debug support
lgp: added LGP-30 [LGP-21] simulator
pdp1_sys.c: fixed bug in LOAD (Mark Crispin)
pdp10_mdfp.c:
- fixed bug in floating unpack
- fixed bug in FIXR (Philip Stone, fixed by Chris Smith)
pdp11_dz.c: added per-line logging
pdp11_rk.c:
- added formatting support
- added address increment inhibit support
- added transfer overrun detection
pdp11_hk.c, pdp11_rp.c: revised for device debug support
pdp11_rq.c: fixed bug in interrupt control (Tom Evans)
pdp11_ry.c: added VAX support
pdp11_tm.c, pdp11_tq.c, pdp11_ts.c: revised for device debug support
pdp11_xu.c: replaced stub with real implementation (Dave Hittner)
pdp18b_cpu.c:
- fixed bug in XVM g_mode implementation
- fixed bug in PDP-15 indexed address calculation
- fixed bug in PDP-15 autoindexed address calculation
pdp18b_fpp.c: fixed bugs in instruction decode
pdp18b_stddev.c:
- fixed clock response to CAF
- fixed bug in hardware read-in mode bootstrap
pdp18b_sys.c: fixed XVM instruction decoding errors
pdp18b_tt1.c: added support for 1-16 additional terminals
vax_moddef.h, vax_cpu.c, vax_sysdev.c:
- added extended physical memory support (Mark Pizzolato)
- added RXV21 support
vax_cpu1.c:
- added PC read fault in EXTxV
- fixed PC write fault in INSV
V3.1 revision history
0 29-Dec-03 sim_defs.h, scp.c: added output stall status
all console emulators: added output stall support
sim_ether.c (Dave Hittner, Mark Pizzolato, Anders Ahgren):
- added Alpha/VMS support
- added FreeBSD, Mac OS/X support
- added TUN/TAP support
- added DECnet duplicate address detection
all memory buffered devices (fixed head disks, floppy disks):
- cleaned up buffer copy code
all DECtapes:
- fixed reverse checksum in read all
- added DECtape off reel message
- simplified timing
eclipse_cpu.c (Charles Owen):
- added floating point support
- added programmable interval timer support
- bug fixes
h316_cpu.c:
- added instruction history
- added DMA/DMC support
- added device ENABLE/DISABLE support
- change default to HSA option included
h316_dp.c: added moving head disk support
h316_fhd.c: added fixed head disk support
h316_mt.c: added magtape support
h316_sys.c: added new device support
nova_dkp.c (Charles Owen):
- fixed bug in flag clear sequence
- added diagnostic mode support for disk sizing
` nova_mt.c (Charles Owen):
- fixed bug, space operations return record count
- fixed bug, reset doesn't cancel rewind
nova_sys.c: added floating point, timer support (Charles Owen)
i1620_cpu.c: fixed bug in branch digit (Dave Babcock)
pdp1_drm.c:
- added parallel drum support
- fixed bug in serial drum instructin decoding
pdp1_sys.c: added parallel drum support, mnemonics
pdp11_cpu.c:
- added autoconfiguration controls
- added support for 18b-only Qbus devices
- cleaned up addressing/bus definitions
pdp11_rk.c, pdp11_ry.c, pdp11_tm.c, pdp11_hk.c:
- added Q18 attribute
pdp11_io.c:
- added autoconfiguration controls
- fixed bug in I/O configuration (Dave Hittner)
pdp11_rq.c:
- revised MB->LBN conversion for greater accuracy
- fixed bug with multiple RAUSER drives
pdp11_tc.c: changed to be off by default (base config is Qbus)
pdp11_xq.c (Dave Hittner, Mark Pizzolato):
- fixed second controller interrupts
- fixed bugs in multicast and promiscuous setup
pdp18b_cpu.c:
- added instruction history
- fixed PDP-4,-7,-9 autoincrement bug
- change PDP-7,-9 default to API option included
pdp8_defs.h, pdp8_sys.c:
- added DECtape off reel message
- added support for TSC8-75 (ETOS) option
- added support for TD8E controller
pdp8_cpu.c: added instruction history
pdp8_rx.c:
- fixed bug in RX28 read status (Charles Dickman)
- fixed double density write
pdp8_td.c: added TD8E controller
pdp8_tsc.c: added TSC8-75 option
vax_cpu.c:
- revised instruction history for dynamic sizing
- added autoconfiguration controls
vax_io.c:
- added autoconfiguration controls
- fixed bug in I/O configuration (Dave Hittner)
id16_cpu.c: revised instruction decoding
id32_cpu.c:
- revised instruction decoding
- added instruction history
V3.0 revision history
2 15-Sep-03 scp.c:
- fixed end-of-file problem in dep, idep
- fixed error on trailing spaces in dep, idep
pdp1_stddev.c
- fixed system hang if continue after PTR error
- added PTR start/stop functionality
- added address switch functionality to PTR BOOT
pdp1_sys.c: added multibank capability to LOAD
pdp18b_cpu.c:
- fixed priorities in PDP-15 API (PI between 3 and 4)
- fixed sign handling in PDP-15 unsigned mul/div
- fixed bug in CAF, must clear API subsystem
i1401_mt.c:
- fixed tape read end-of-record handling based on real 1401
- added diagnostic read (space forward)
i1620_cpu.c
- fixed bug in immediate index add (Michael Short)
1 27-Jul-03 pdp1_cpu.c: updated to detect indefinite I/O wait
pdp1_drm.c: fixed incorrect logical, missing activate, break
pdp1_lp.c:
- fixed bugs in instruction decoding, overprinting
- updated to detect indefinite I/O wait
pdp1_stddev.c:
- changed RIM loader to be "hardware"
- updated to detect indefinite I/O wait
pdp1_sys.c: added block loader format support to LOAD
pdp10_rp.c: fixed bug in read header
pdp11_rq: fixed bug in user disk size (Chaskiel M Grundman)
pdp18b_cpu.c:
- added FP15 support
- added XVM support
- added EAE support to the PDP-4
- added PDP-15 "re-entrancy ECO"
- fixed memory protect/skip interaction
- fixed CAF to only reset peripherals
pdp18b_fpp.c: added FP15
pdp18b_lp.c: fixed bug in Type 62 overprinting
pdp18b_rf.c: fixed bug in set size routine
pdp18b_stddev.c:
- increased PTP TIME for PDP-15 operating systems
- added hardware RIM loader for PDP-7, PDP-9, PDP-15
pdp18b_sys.c: added FP15, KT15, XVM instructions
pdp8b_df.c, pdp8_rf.c: fixed bug in set size routine
hp2100_dr.c:
- fixed drum sizes
- fixed variable capacity interaction with SAVE/RESTORE
i1401_cpu.c: revised fetch to model hardware more closely
ibm1130: fixed bugs found by APL 1130
nova_dsk.c: fixed bug in set size routine
altairz80: fixed bug in real-time clock on Windows host
0 15-Jun-03 scp.c:
- added ASSIGN/DEASSIGN
- changed RESTORE to detach files
- added u5, u6 unit fields
- added USE_ADDR64 support
- changed some structure fields to unsigned
scp_tty.c: added extended file seek
sim_sock.c: fixed calling sequence in stubs
sim_tape.c:
- added E11 and TPC format support
- added extended file support
sim_tmxr.c: fixed bug in SHOW CONNECTIONS
all magtapes:
- added multiformat support
- added extended file support
i1401_cpu.c:
- fixed mnemonic, instruction lengths, and reverse
scan length check bug for MCS
- fixed MCE bug, BS off by 1 if zero suppress
- fixed chaining bug, D lost if return to SCP
- fixed H branch, branch occurs after continue
- added check for invalid 8 character MCW, LCA
i1401_mt.c: fixed load-mode end of record response
nova_dsk.c: fixed variable size interaction with restore
pdp1_dt.c: fixed variable size interaction with restore
pdp10_rp.c: fixed ordering bug in attach
pdp11_cpu.c:
- fixed bug in MMR1 update (Tim Stark)
- fixed bug in memory size table
pdp11_lp.c, pdp11_rq.c: added extended file support
pdp11_rl.c, pdp11_rp.c, pdp11_ry.c: fixed ordering bug in attach
pdp11_tc.c: fixed variable size interaction with restore
pdp11_xq.c:
- corrected interrupts on IE state transition (code by Tom Evans)
- added interrupt clear on soft reset (first noted by Bob Supnik)
- removed interrupt when setting XL or RL (multiple people)
- added SET/SHOW XQ STATS
- added SHOW XQ FILTERS
- added ability to split received packet into multiple buffers
- added explicit runt & giant packet processing
vax_fpa.c:
- fixed integer overflow bug in CVTfi
- fixed multiple bugs in EMODf
vax_io.c: optimized byte and word DMA routines
vax_sysdev.c:
- added calibrated delay to ROM reads (Mark Pizzolato)
- fixed calibration problems in interval timer (Mark Pizzolato)
pdp1_dt.c: fixed variable size interaction with restore
pdp18b_dt.c: fixed variable size interaction with restore
pdp18b_mt.c: fixed bug in MTTR
pdp18b_rf.c: fixed variable size interaction with restore
pdp8_df.c, pdp8_rf.c: fixed variable size interaction
with restore
pdp8_dt.c: fixed variable size interaction with restore
pdp8_mt.c: fixed bug in SKTR
hp2100_dp.c,hp2100_dq.c:
- fixed bug in read status (13210A controller)
- fixed bug in seek completion
id_pt.c: fixed type declaration (Mark Pizzolato)
gri_cpu.c: fixed bug in SC queue pointer management
V2.10 revision history
4 03-Mar-03 scp.c
- added .ini startup file capability
- added multiple breakpoint actions
- added multiple switch evaluation points
- fixed bug in multiword deposits to file
sim_tape.c: magtape simulation library
h316_stddev.c: added set line frequency command
hp2100_mt.c, hp2100_ms.c: revised to use magtape library
i1401_mt.c: revised to use magtape library
id_dp.c, id_idc.c: fixed cylinder overflow on writes
id_mt.c:
- fixed error handling to stop selector channel
- revised to use magtape library
id16_sys.c, id32_sys.c: added relative addressing support
id_uvc.c:
- added set frequency command to line frequency clock
- improved calibration algorithm for precision clock
nova_clk.c: added set line frequency command
nova_dsk.c: fixed autosizing algorithm
nova_mt.c: revised to use magtape library
pdp10_tu.c: revised to use magtape library
pdp11_cpu.c: fixed bug in MMR1 update (Tim Stark)
pdp11_stddev.c
- added set line frequency command
- added set ctrl-c command
pdp11_rq.c:
- fixed ordering problem in queue process
- fixed bug in vector calculation for VAXen
- added user defined drive support
pdp11_ry.c: fixed autosizing algorithm
pdp11_tm.c, pdp11_ts.c: revised to use magtape library
pdp11_tq.c:
- fixed ordering problem in queue process
- fixed overly restrictive test for bad modifiers
- fixed bug in vector calculation for VAXen
- added variable controller, user defined drive support
- revised to use magtape library
pdp18b_cpu.c: fixed three EAE bugs (Hans Pufal)
pdp18b_mt.c:
- fixed bugs in BOT error handling, interrupt handling
- revised to use magtape library
pdp18b_rf.c:
- removed 22nd bit from disk address
- fixed autosizing algorithm
pdp18b_stddev.c:
- added set line frequency command
- added set ctrl-c command
pdp18b_sys.c: fixed FMTASC printouts (Hans Pufal)
pdp8_clk.c: added set line frequency command
pdp8_df.c, pdp8_rf.c, pdp8_rx.c: fixed autosizing algorithm
pdp8_mt.c:
- fixed bug in BOT error handling
- revised to use magtape library
pdp8_tt.c: added set ctrl-c command
sds_cpu.c: added set line frequency command
sds_mt.c: revised to use magtape library
vax_stddev.c: added set ctrl-c command
3 06-Feb-03 scp.c:
- added dynamic extension of the breakpoint table
- added breakpoint actions
hp2100_cpu.c: fixed last cycle bug in DMA output (found by
Mike Gemeny)
hp2100_ipl.c: individual links are full duplex (found by
Mike Gemeny)
pdp11_cpu.c: changed R, SP to track PSW<rs,cm> respectively
pdp18b_defs.h, pdp18b_sys.c: added RB09 fixed head disk,
LP09 printer
pdp18b_rf.c:
- fixed IOT decoding (Hans Pufal)
- fixed address overrun logic
- added variable number of platters and autosizing
pdp18b_rf.c:
- fixed IOT decoding
- fixed bug in command initiation
pdp18b_rb.c: new RB09 fixed head disk
pdp18b_lp.c: new LP09 line printer
pdp8_df.c: added variable number of platters and autosizing
pdp8_rf.c: added variable number of platters and autosizing
nova_dsk.c: added variable number of platters and autosizing
id16_cpu.c: fixed bug in SETM, SETMR (Mark Pizzolato)
2 15-Jan-03 scp.c:
- added dynamic memory size flag and RESTORE support
- added EValuate command
- added get_ipaddr routine
- added ! (OS command) feature (Mark Pizzolato)
- added BREAK support to sim_poll_kbd (Mark Pizzolato)
sim_tmxr.c:
- fixed bugs in IAC+IAC handling (Mark Pizzolato)
- added IAC+BRK handling (Mark Pizzolato)
sim_sock.c:
- added use count for Windows start/stop
- added sim_connect_sock
pdp1_defs.h, pdp1_cpu.c, pdp1_sys.c, pdp1_drm.c:
added Type 24 serial drum
pdp18_defs.h: added PDP-4 drum support
hp2100_cpu.c: added 21MX IOP support
hp2100_ipl.c: added HP interprocessor link support
pdp11_tq.c: fixed bug in transfer end packet length
pdp11_xq.c:
- added VMScluster support (thanks to Mark Pizzolato)
- added major performance enhancements (thanks to Mark Pizzolato)
- added local packet processing
- added system id broadcast
pdp11_stddev.c: changed default to 7b (for early UNIX)
vax_cpu.c, vax_io.c, vax_stddev.c, vax_sysdev.c:
added console halt capability (Mark Pizzolato)
all terminals and multiplexors: added BREAK support
1 21-Nov-02 pdp1_stddev.c: changed typewriter to half duplex
(Derek Peschel)
pdp10_tu.c:
- fixed bug in bootstrap (reported by Michael Thompson)
- fixed bug in read (reported by Harris Newman)
0 15-Nov-02 SCP and libraries
scp.c:
- added Telnet console support
- removed VT emulation support
- added support for statically buffered devices
- added HELP <command>
- fixed bugs in set_logon, ssh_break (David Hittner)
- added VMS file optimization (Robert Alan Byer)
- added quiet mode, DO with parameters, GUI interface,
extensible commands (Brian Knittel)
- added DEVICE context and flags
- added central device enable/disable support
- modified SAVE/GET to save and restore flags
- modified boot routine calling sequence
scp_tty.c:
- removed VT emulation support
- added sim_os_sleep, renamed sim_poll_kbd, sim_putchar
sim_tmxr.c:
- modified for Telnet console support
- fixed bug in binary (8b) support
sim_sock.c: modified for Telnet console support
sim_ether.c: new library for Ethernet (David Hittner)
all magtapes:
- added support for end of medium
- cleaned up BOT handling
all DECtapes: added support for RT11 image file format
most terminals and multiplexors:
- added support for 7b vs 8b character processing
PDP-1
pdp1_cpu.c, pdp1_sys.c, pdp1_dt.c: added PDP-1 DECtape support
PDP-8
pdp8_cpu.c, all peripherals:
- added variable device number support
- added new device enabled/disable support
pdp8_rx.c: added RX28/RX02 support
PDP-11
pdp11_defs.h, pdp11_io.c, pdp11_sys.c, all peripherals:
- added variable vector support
- added new device enable/disable support
- added autoconfiguration support
all bootstraps: modified to support variable addresses
dec_mscp.h, pdp11_tq.c: added TK50 support
pdp11_rq.c:
- added multicontroller support
- fixed bug in HBE error log packet
- fixed bug in ATP processing
pdp11_ry.c: added RX211/RX02 support
pdp11_hk.c: added RK611/RK06/RK07 support
pdp11_tq.c: added TMSCP support
pdp11_xq.c: added DEQNA/DELQA support (David Hittner)
pdp11_pclk.c: added KW11P support
pdp11_ts.c:
- fixed bug in CTL decoding
- fixed bug in extended status XS0_MOT
pdp11_stddev.c: removed paper tape to its own module
PDP-18b
pdp18b_cpu.c, all peripherals:
- added variable device number support
- added new device enabled/disabled support
VAX
dec_dz.h: fixed bug in number of boards calculation
vax_moddefs.h, vax_io.c, vax_sys.c, all peripherals:
- added variable vector support
- added new device enable/disable support
- added autoconfiguration support
vax_sys.c:
- generalized examine/deposit
- added TMSCP, multiple RQDX3, DEQNA/DELQA support
vax_stddev.c: removed paper tape, now uses PDP-11 version
vax_sysdev.c:
- allowed NVR to be attached to file
- removed unused variables (David Hittner)
PDP-10
pdp10_defs.h, pdp10_ksio.c, all peripherals:
- added variable vector support
- added new device enable/disable support
pdp10_defs.h, pdp10_ksio.c: added support for standard PDP-11
peripherals, added RX211 support
pdp10_pt.c: rewritten to reference common implementation
Nova, Eclipse:
nova_cpu.c, eclipse_cpu.c, all peripherals:
- added new device enable/disable support
HP2100
hp2100_cpu:
- fixed bugs in the EAU, 21MX, DMS, and IOP instructions
- fixed bugs in the memory protect and DMS functions
- created new options to enable/disable EAU, MPR, DMS
- added new device enable/disable support
hp2100_fp.c:
- recoded to conform to 21MX microcode algorithms
hp2100_stddev.c:
- fixed bugs in TTY reset, OTA, time base generator
- revised BOOT support to conform to RBL loader
- added clock calibration
hp2100_dp.c:
- changed default to 13210A
- added BOOT support
hp2100_dq.c:
- finished incomplete functions, fixed head switching
- added BOOT support
hp2100_ms.c:
- fixed bugs found by diagnostics
- added 13183 support
- added BOOT support
hp2100_mt.c:
- fixed bugs found by diagnostics
- disabled by default
hp2100_lpt.c: implemented 12845A controller
hp2100_lps.c:
- renamed 12653A controller
- added diagnostic mode for MPR, DCPC diagnostics
- disabled by default
IBM 1620: first release
V2.9 revision history
11 20-Jul-02 i1401_mt.c: on read, end of record stores group mark
without word mark (Van Snyder)
i1401_dp.c: reworked address generation and checking
vax_cpu.c: added infinite loop detection and halt to
boot ROM option (Mark Pizzolato)
vax_fpa.c: changed function names to prevent conflict
with C math library
pdp11_cpu.c: fixed bug in MMR0 update logic (from
John Dundas)
pdp18b_stddev.c: added "ASCII mode" for reader and
punch (Hans Pufal)
gri_*.c: added GRI-909 simulator
scp.c: added DO echo, DO exit (Brian Knittel)
scp_tty.c: added Windows priority hacking (from
Mark Pizzolato)
10 15-Jun-02 scp.c: fixed error checking on calls to fxread/fxwrite
(Norm Lastovic)
scp_tty.c, sim_vt.h, sim_vt.c: added VTxxx emulation
support for Windows (Fischer Franz)
sim_sock.c: added OS/2 support (Holger Veit)
pdp11_cpu.c: fixed bugs (John Dundas)
- added special case for PS<15:12> = 1111 to MFPI
- removed special case from MTPI
- added masking of relocation adds
i1401_cpu.c:
- added multiply/divide
- fixed bugs (Van Snyder)
o 5 and 7 character H, 7 character doesn't branch
o 8 character NOP
o 1401-like memory dump
i1401_dp.c: added 1311 disk
9 04-May-02 pdp11_rq: fixed bug in polling routine
8 03-May-02 scp.c:
- changed LOG/NOLOG to SET LOG/NOLOG
- added SHOW LOG
- added SET VT/NOVT and SHOW VT for VT emulation
sim_sock.h: changed VMS stropt.h include to ioctl.h
vax_cpu.c
- added TODR powerup routine to set date, time on boot
- fixed exception flows to clear trap request
- fixed register logging in autoincrement indexed
vax_stddev.c: added TODR powerup routine
vax_cpu1.c: fixed exception flows to clear trap request
7 30-Apr-02 scp.c: fixed bug in clock calibration when (real) clock
jumps forward due too far (Jonathan Engdahl)
pdp11_cpu.c: fixed bugs, added features (John Dundas
and Wolfgang Helbig)
- added HTRAP and BPOK to maintenance register
- added trap on kernel HALT if MAINT<HTRAP> set
- fixed red zone trap, clear odd address and nxm traps
- fixed RTS SP, don't increment restored SP
- fixed TSTSET, write dst | 1 rather than prev R0 | 1
- fixed DIV, set N=0,Z=1 on div by zero (J11, 11/70)
- fixed DIV, set set N=Z=0 on overfow (J11, 11/70)
- fixed ASH, ASHC, count = -32 used implementation-
dependent 32 bit right shift
- fixed illegal instruction test to detect 000010
- fixed write-only page test
pdp11_rp.c: fixed SHOW ADDRESS command
vaxmod_defs.h: fixed DZ vector base and number of lines
dec_dz.h:
- fixed interrupt acknowledge routines
- fixed SHOW ADDRESS command
all magtape routines: added test for badly formed
record length (suggested by Jonathan Engdahl)
6 18-Apr-02 vax_cpu.c: fixed CASEL condition codes
vax_cpu1.c: fixed vfield pos > 31 test to be unsigned
vax_fpu.c: fixed EDIV overflow test for 0 quotient
5 14-Apr-02 vax_cpu1.c:
- fixed interrupt, prv_mode set to 0 (Tim Stark)
- fixed PROBEx to mask mode to 2b (Kevin Handy)
4 1-Apr-02 pdp11_rq.c: fixed bug, reset cleared write protect status
pdp11_ts.c: fixed bug in residual frame count after space
3 15-Mar-02 pdp11_defs.h: changed default model to KDJ11A (11/73)
pdp11_rq.c: adjusted delays for M+ timing bugs
hp2100_cpu.c, pdp10_cpu.c, pdp11_cpu.c: tweaked abort
code for ANSI setjmp/longjmp compliance
hp2100_cpu.c, hp2100_fp.c, hp2100_stddev.c, hp2100_sys.c:
revised to allocate memory dynamically
2 01-Mar-02 pdp11_cpu.c:
- fixed bugs in CPU registers
- fixed double operand evaluation order for M+
pdp11_rq.c: added delays to initialization for
RSX11M+ prior to V4.5
1 20-Feb-02 scp.c: fixed bug in clock calibration when (real)
time runs backwards
pdp11_rq.c: fixed bug in host timeout logic
pdp11_ts.c: fixed bug in message header logic
pdp18b_defs.h, pdp18b_dt.c, pdp18b_sys.c: added
PDP-7 DECtape support
hp2100_cpu.c:
- added floating point and DMS
- fixed bugs in DIV, ASL, ASR, LBT, SBT, CBT, CMW
hp2100_sys.c: added floating point, DMS
hp2100_fp.c: added floating point
ibm1130: added Brian Knittel's IBM 1130 simulator
0 30-Jan-02 scp.c:
- generalized timer package for multiple timers
- added circular register arrays
- fixed bugs, line spacing in modifier display
- added -e switch to attach
- moved device enable/disable to simulators
scp_tty.c: VAX specific fix (Robert Alan Byer)
sim_tmxr.c, sim_tmxr.h:
- added tmxr_fstats, tmxr_dscln
- renamed tmxr_fstatus to tmxr_fconns
sim_sock.c, sim_sock.h: added VMS support (from
Robert Alan Byer)
pdp_dz.h, pdp18b_tt1.c, nova_tt1.c:
- added SET DISCONNECT
- added SHOW STATISTICS
pdp8_defs.h: fixed bug in interrupt enable initialization
pdp8_ttx.c: rewrote as unified multiplexor
pdp11_cpu.c: fixed calc_MMR1 macro (Robert Alan Byer)
pdp11_stddev.c: fixed bugs in KW11L (John Dundas)
pdp11_rp.c: fixed bug in 18b mode boot
pdp11 bootable I/O devices: fixed register setup at boot
exit (Doug Carman)
hp2100_cpu.c:
- fixed DMA register tables (Bill McDermith)
- fixed SZx,SLx,RSS bug (Bill McDermith)
- fixed flop restore logic (Bill McDermith)
hp2100_mt.c: fixed bug on write of last character
hp2100_dq,dr,ms,mux.c: added new disk, magtape, and terminal
multiplexor controllers
i1401_cd.c, i1401_mt.c: new zero footprint bootstraps
(Van Snyder)
i1401_sys.c: fixed symbolic display of H, NOP with no trailing
word mark (Van Snyder)
most CPUs:
- replaced OLDPC with PC queue
- implemented device enable/disable locally
V2.8 revision history
5 25-Dec-01 scp.c: fixed bug in DO command (John Dundas)
pdp10_cpu.c:
- moved trap-in-progress to separate variable
- cleaned up declarations
- cleaned up volatile state for GNU C longjmp
pdp11_cpu.c: cleaned up declarations
pdp11_rq.c: added RA-class disks
4 17-Dec-01 pdp11_rq.c: added delayed processing of packets
3 16-Dec-01 pdp8_cpu.c:
- mode A EAE instructions didn't clear GTF
- ASR shift count > 24 mis-set GTF
- effective shift count == 32 didn't work
2 07-Dec-01 scp.c: added breakpoint package
all CPU's: revised to use new breakpoint package
1 05-Dec-01 scp.c: fixed bug in universal register name logic
0 30-Nov-01 Reorganized simh source and documentation tree
scp: Added DO command, universal registers, extended
SET/SHOW logic
pdp11: overhauled PDP-11 for DMA map support, shared
sources with VAX, dynamic buffer allocation
18b pdp: overhauled interrupt structure
pdp8: added RL8A
pdp10: fixed two ITS-related bugs (Dave Conroy)
V2.7 revision history
patch date module(s) and fix(es)
15 23-Oct-01 pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: fixed bugs
error interrupt handling
pdp10_defs.h, pdp10_ksio.c, pdp10_fe.c, pdp10_fe.c,
pdp10_rp.c, pdp10_tu.c: reworked I/O page interface
to use symbolic base addresses and lengths
14 20-Oct-01 dec_dz.h, sim_tmxr_h, sim_tmxr.c: fixed bug in Telnet
state handling (Thord Nilson), removed
tmxr_getchar, added tmxr_rqln and tmxr_tqln
13 18-Oct-01 pdp11_tm.c: added stub diagnostic register clock
for RSTS/E (Thord Nilson)
12 15-Oct-01 pdp11_defs.h, pdp11_cpu.c, pdp11_tc.c, pdp11_ts.c,
pdp11_rp.c: added operations logging
11 8-Oct-01 scp.c: added sim_rev.h include and version print
pdp11_cpu.c: fixed bug in interrupt acknowledge,
multiple outstanding interrupts caused the lowest
rather than the highest to be acknowledged
10 7-Oct-01 pdp11_stddev.c: added monitor bits (CSR<7>) for full
KW11L compatibility, needed for RSTS/E autoconfiguration
9 6-Oct-01 pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: rewrote interrupt
logic from RH11/RH70 schematics, to mimic hardware quirks
dec_dz.c: fixed bug in carrier detect logic, carrier
detect was being cleared on next modem poll
8 4-Oct-01 pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: undid edit of
28-Sep-01; real problem was level-sensitive nature of
CS1_SC, but CS1_SC can only trigger an interrupt if
DONE is set
7 2-Oct-01 pdp11_rp.c, pdp10_rp.c: CS1_SC is evaluated as a level-
sensitive, rather than an edge-sensitive, input to
interrupt request
6 30-Sep-01 pdp11_rp.c, pdp10_rp.c: separated out CS1<5:0> to per-
drive registers
pdp10_tu.c: based on above, cleaned up handling of
non-existent formatters, fixed non-data transfer
commands clearing DONE
5 28-Sep-01 pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: controller should
interrupt if ATA or SC sets when IE is set, was
interrupting only if DON = 1 as well
4 27-Sep-01 pdp11_ts.c:
- NXM errors should return TC4 or TC5; were returning TC3
- extended features is part of XS2; was returned in XS3
- extended characteristics (fifth) word needed for RSTS/E
pdp11_tc.c: stop, stop all do cause an interrupt
dec_dz.h: scanner should find a ready output line, even
if there are no connections; needed for RSTS/E autoconfigure
scp.c:
- added routine sim_qcount for 1130
- added "simulator exit" detach routine for 1130
sim_defs.h: added header for sim_qcount
3 20-Sep-01 pdp11_ts.c: boot code binary was incorrect
2 19-Sep-01 pdp18b_cpu.c: EAE should interpret initial count of 00
as 100
scp.c: modified Macintosh support
1 17-Sep-01 pdp8_ttx.c: new module for PDP-8 multi-terminal support
pdp18b_tt1.c: modified to use sim_tmxr library
nova_tt1.c: modified to use sim_tmxr library
dec_dz.h: added autodisconnect support
scp.c: removed old multiconsole support
sim_tmxr.c: modified calling sequence for sim_putchar_ln
sim_sock.c: added Macintosh sockets support
*/
#endif