| /* vax_vc.c: QVSS video simulator (VCB01) | |
| Copyright (c) 2011-2013, Matt Burke | |
| Permission is hereby granted, free of charge, to any person obtaining a | |
| copy of this software and associated documentation files (the "Software"), | |
| to deal in the Software without restriction, including without limitation | |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| and/or sell copies of the Software, and to permit persons to whom the | |
| Software is furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be included in | |
| all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| THE AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| Except as contained in this notice, the name of the author shall not be | |
| used in advertising or otherwise to promote the sale, use or other dealings | |
| in this Software without prior written authorization from the author. | |
| vc Qbus video subsystem | |
| 08-Nov-2013 MB Implemented mouse position register | |
| 06-Nov-2013 MB Increased the speed of v-sync interrupts, which | |
| was too slow for some O/S drivers. | |
| 11-Jun-2013 MB First version | |
| */ | |
| #if !defined(VAX_620) | |
| #include "vax_defs.h" | |
| #include "sim_video.h" | |
| #include "vax_2681.h" | |
| /* CSR - control/status register */ | |
| BITFIELD vc_csr_bits[] = { | |
| BIT(MOD), /* Monitor size */ | |
| #define CSR_V_MDO 0 | |
| #define CSR_MOD (1<<CSR_V_MDO) | |
| BITNCF(1), /* unused */ | |
| BIT(VID), /* Video output en */ | |
| #define CSR_V_VID 2 | |
| #define CSR_VID (1<<CSR_V_VID) | |
| BIT(FNC), /* Cursor function */ | |
| #define CSR_V_FNC 3 | |
| #define CSR_FNC (1<<CSR_V_FNC) | |
| BIT(VRB), /* Video readback en */ | |
| #define CSR_V_VRB 4 | |
| #define CSR_VRB (1<<CSR_V_VRB) | |
| BIT(TST), /* Test bit */ | |
| #define CSR_V_TST 5 | |
| #define CSR_TST (1<<CSR_V_TST) | |
| BIT(IEN), /* Interrupt Enable */ | |
| #define CSR_V_IEN 6 | |
| #define CSR_IEN (1<<CSR_V_IEN) | |
| BIT(CUR), /* Cursor active */ | |
| #define CSR_V_CUR 7 | |
| #define CSR_CUR (1<<CSR_V_CUR) | |
| BIT(MSA), /* Mouse Button A */ | |
| #define CSR_V_MSA 8 | |
| #define CSR_MSA (1<<CSR_V_MSA) | |
| BIT(MSA), /* Mouse Button B */ | |
| #define CSR_V_MSB 9 | |
| #define CSR_MSB (1<<CSR_V_MSB) | |
| BIT(MSA), /* Mouse Button C */ | |
| #define CSR_V_MSC 10 | |
| #define CSR_MSC (1<<CSR_V_MSC) | |
| BITF(MA,8), /* Memory Bank Switch (Base Address) */ | |
| #define CSR_V_MA 11 | |
| #define CSR_S_MA 4 | |
| #define CSR_M_MA (((1<<CSR_S_MA)-1)<<CSR_V_MA) | |
| BITNCF(1), /* unused */ | |
| ENDBITS | |
| }; | |
| #define CSR_RW (CSR_IEN|CSR_TST|CSR_VRB|CSR_FNC|CSR_VID) | |
| /* ICSR - interrupt controller command/status register */ | |
| BITFIELD vc_icsr_bits[] = { | |
| BITF(IRRVEC,3), /* IRR Vector */ | |
| #define ICSR_V_IRRVEC 0 | |
| #define ICSR_S_IRRVEC 3 | |
| #define ICSR_M_IRRVEC (((1<<ICSR_S_IRRVEC)-1)<<ICSR_V_IRRVEC) | |
| BIT(MMS), /* Master Mask */ | |
| #define ICSR_V_MMS 3 | |
| #define ICSR_MMS (1<<ICSR_V_MMS) | |
| BIT(INM), /* Interrupt Mode */ | |
| #define ICSR_V_INM 4 | |
| #define ICSR_INM (1<<ICSR_V_INM) | |
| BIT(PRM), /* Priority Mode */ | |
| #define ICSR_V_PRM 5 | |
| #define ICSR_PRM (1<<ICSR_V_PRM) | |
| BIT(ENA), /* Enable */ | |
| #define ICSR_V_ENA 6 | |
| #define ICSR_ENA (1<<ICSR_V_ENA) | |
| BIT(GRI), /* Group Interrupt */ | |
| #define ICSR_V_GRI 7 | |
| #define ICSR_GRI (1<<ICSR_V_GRI) | |
| BITNCF(8), /* unused */ | |
| ENDBITS | |
| }; | |
| const char *vc_icm_rp_names[] = {"ISR", "IMR", "IRR", "ACR"}; | |
| /* mode - interrupt controller mode register */ | |
| BITFIELD vc_ic_mode_bits[] = { | |
| BIT(PM), /* Priority Mode */ | |
| #define ICM_V_PM 0 | |
| #define ICM_PM (1<<ICM_V_PM) | |
| BIT(PM), /* Vector Selection */ | |
| #define ICM_V_VS 1 | |
| #define ICM_VS (1<<ICM_V_VS) | |
| BIT(IM), /* Interrupt Mode */ | |
| #define ICM_V_IM 2 | |
| #define ICM_IM (1<<ICM_V_IM) | |
| BIT(GIP), /* Group Interrupt Polarity */ | |
| #define ICM_V_GIP 3 | |
| #define ICM_GIP (1<<ICM_V_GIP) | |
| BIT(REQP), /* Interrupt Request Polarity */ | |
| #define ICM_V_REQP 4 | |
| #define ICM_REQP (1<<ICM_V_REQP) | |
| BITFNAM(RP,2,vc_icm_rp_names), /* Register Preselect */ | |
| #define ICM_V_RP 5 | |
| #define ICM_S_RP 2 | |
| #define ICM_M_RP (((1<<ICM_S_RP)-1)<<ICM_V_RP) | |
| BIT(MM), /* Master Mask */ | |
| #define ICM_V_MM 7 | |
| #define ICM_MM (1<<ICM_V_MM) | |
| ENDBITS | |
| }; | |
| #define CRTCP_REG 0x001F /* CRTC internal register address */ | |
| #define CRTCP_VB 0x0020 /* Vertical blank */ | |
| #define CRTCP_LPF 0x0040 /* Light pen register full */ | |
| #define CRTCP_US 0x0080 /* Update strobe */ | |
| #define CRTCP_RW CRTCP_REG | |
| #define CRTC_HTOT 0 /* Horizontal total */ | |
| #define CRTC_HDSP 1 /* Horizontal displayed */ | |
| #define CRTC_HPOS 2 /* HSYNC position */ | |
| #define CRTC_HVWD 3 /* HSYNC/VSYNC widths */ | |
| #define CRTC_VTOT 4 /* Vertical total */ | |
| #define CRTC_VTOA 5 /* Vertical total adjust */ | |
| #define CRTC_VDSP 6 /* Vertical displayed */ | |
| #define CRTC_VPOS 7 /* VSYNC position */ | |
| #define CRTC_MODE 8 /* Mode */ | |
| #define CRTC_MSCN 9 /* Maximum scan line */ | |
| #define CRTC_CSCS 10 /* Cursor scan start */ | |
| #define CRTC_CSCE 11 /* Cursor scan end */ | |
| #define CRTC_SAH 12 /* Start address high */ | |
| #define CRTC_SAL 13 /* Start address low */ | |
| #define CRTC_CAH 14 /* Cursor address high */ | |
| #define CRTC_CAL 15 /* Cursor address low */ | |
| #define CRTC_LPPL 16 /* Light pen position low */ | |
| #define CRTC_LPPH 17 /* Light pen position high */ | |
| #define CRTC_SIZE 18 /* Number of registers */ | |
| #define IRQ_DUART 0 /* UART chip */ | |
| #define IRQ_VSYNC 1 /* VSYNC */ | |
| #define IRQ_MOUSE 2 /* Mouse movement */ | |
| #define IRQ_CSTRT 3 /* Cursor start */ | |
| #define IRQ_MBA 4 /* Mouse button A */ | |
| #define IRQ_MBB 5 /* Mouse button B */ | |
| #define IRQ_MBC 6 /* Mouse button C */ | |
| #define IRQ_SPARE 7 /* (spare) */ | |
| #define VC_XSIZE 1024 /* screen size */ | |
| #define VC_YSIZE 864 | |
| #define VC_MEMSIZE (1u << 16) /* video memory size */ | |
| #define VC_MOVE_MAX 49 /* mouse movement max (per update) */ | |
| #define VCMAP_VLD 0x80000000 /* valid */ | |
| #define VCMAP_LN 0x00000FFF /* buffer line */ | |
| #define VC_OFF(x,y) ((x >> 5) | (y << 5)) /* index into framebuffer */ | |
| #define CUR_X (vc_curx & 0x3FF) /* cursor X */ | |
| #define CUR_Y ((vc_crtc[CRTC_CAH] * \ | |
| (vc_crtc[CRTC_MSCN] + 1)) + \ | |
| vc_crtc[CRTC_CSCS]) /* cursor Y */ | |
| #define CUR_V ((vc_crtc[CRTC_CSCS] & 0x20) == 0) /* cursor visible */ | |
| #define CUR_F (vc_csr & CSR_FNC) /* cursor function */ | |
| #define VSYNC_TIME 8000 /* vertical sync interval */ | |
| #define IOLN_QVSS 0100 | |
| extern int32 int_req[IPL_HLVL]; | |
| extern int32 tmxr_poll; /* calibrated delay */ | |
| extern t_stat lk_wr (uint8 c); | |
| extern t_stat lk_rd (uint8 *c); | |
| extern t_stat vs_wr (uint8 c); | |
| extern t_stat vs_rd (uint8 *c); | |
| struct vc_int_t { | |
| uint32 ptr; | |
| uint32 vec[8]; /* Interrupt vectors */ | |
| uint32 irr; /* Interrupt request */ | |
| uint32 imr; /* Interrupt mask */ | |
| uint32 isr; /* Interrupt status */ | |
| uint32 acr; /* Auto-clear mask */ | |
| uint32 mode; | |
| }; | |
| struct vc_int_t vc_intc; /* Interrupt controller */ | |
| uint32 vc_csr = 0; /* Control/status */ | |
| uint32 vc_curx = 0; /* Cursor X-position */ | |
| uint32 vc_cur_x = 0; /* Last cursor X-position */ | |
| uint32 vc_cur_y = 0; /* Last cursor Y-position */ | |
| uint32 vc_cur_f = 0; /* Last cursor function */ | |
| t_bool vc_cur_v = FALSE; /* Last cursor visible */ | |
| uint32 vc_mpos = 0; /* Mouse position */ | |
| uint32 vc_crtc[CRTC_SIZE]; /* CRTC registers */ | |
| uint32 vc_crtc_p = 0; /* CRTC pointer */ | |
| uint32 vc_icdr = 0; /* Interrupt controller data */ | |
| uint32 vc_icsr = 0; /* Interrupt controller status */ | |
| uint32 vc_map[1024]; /* Scanline map */ | |
| uint32 *vc_buf = NULL; /* Video memory */ | |
| uint8 vc_cur[256]; /* Cursor image */ | |
| DEVICE vc_dev; | |
| t_stat vc_rd (int32 *data, int32 PA, int32 access); | |
| t_stat vc_wr (int32 data, int32 PA, int32 access); | |
| t_stat vc_svc (UNIT *uptr); | |
| t_stat vc_reset (DEVICE *dptr); | |
| t_stat vc_set_enable (UNIT *uptr, int32 val, char *cptr, void *desc); | |
| void vc_setint (int32 src); | |
| int32 vc_inta (void); | |
| void vc_clrint (int32 src); | |
| void vc_uart_int (uint32 set); | |
| t_stat vc_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
| char *vc_description (DEVICE *dptr); | |
| /* QVSS data structures | |
| vc_dev QVSS device descriptor | |
| vc_unit QVSS unit list | |
| vc_reg QVSS register list | |
| vc_mod QVSS modifier list | |
| */ | |
| DIB vc_dib = { | |
| IOBA_AUTO, IOLN_QVSS, &vc_rd, &vc_wr, | |
| 2, IVCL (QVSS), VEC_AUTO, { &vc_inta, &vc_inta } | |
| }; | |
| /* Debugging Bisim_tmaps */ | |
| #define DBG_REG 0x0100 /* register activity */ | |
| #define DBG_INT0 0x0001 /* interrupt 0 */ | |
| #define DBG_INT1 0x0002 /* interrupt 1 */ | |
| #define DBG_INT2 0x0004 /* interrupt 2 */ | |
| #define DBG_INT3 0x0008 /* interrupt 3 */ | |
| #define DBG_INT4 0x0010 /* interrupt 4 */ | |
| #define DBG_INT5 0x0020 /* interrupt 5 */ | |
| #define DBG_INT6 0x0040 /* interrupt 6 */ | |
| #define DBG_INT7 0x0080 /* interrupt 7 */ | |
| #define DBG_INT 0x00FF /* interrupt 0-7 */ | |
| DEBTAB vc_debug[] = { | |
| {"REG", DBG_REG}, | |
| {"DUART", DBG_INT0}, | |
| {"VSYNC", DBG_INT1}, | |
| {"MOUSE", DBG_INT2}, | |
| {"CSTRT", DBG_INT3}, | |
| {"MBA", DBG_INT4}, | |
| {"MBB", DBG_INT5}, | |
| {"MBC", DBG_INT6}, | |
| {"SPARE", DBG_INT7}, | |
| {"INT", DBG_INT0|DBG_INT1|DBG_INT2|DBG_INT3|DBG_INT4|DBG_INT5|DBG_INT6|DBG_INT7}, | |
| {"VMOUSE", SIM_VID_DBG_MOUSE}, | |
| {"VKEY", SIM_VID_DBG_KEY}, | |
| {"VVIDEO", SIM_VID_DBG_VIDEO}, | |
| {0} | |
| }; | |
| UNIT vc_unit = { UDATA (&vc_svc, UNIT_IDLE, 0) }; | |
| REG vc_reg[] = { | |
| { HRDATADF (CSR, vc_csr, 16, "Control and status register", vc_csr_bits) }, | |
| { HRDATAD (CURX, vc_curx, 9, "Cursor X-position") }, | |
| { HRDATAD (MPOS, vc_mpos, 16, "Mouse position register") }, | |
| { HRDATAD (ICDR, vc_icdr, 16, "Interrupt controller data register") }, | |
| { HRDATADF (ICSR, vc_icsr, 16, "Interrupt controller command/status register", vc_icsr_bits) }, | |
| { HRDATAD (IRR, vc_intc.irr, 8, "Interrupt controller request") }, | |
| { HRDATAD (IMR, vc_intc.imr, 8, "Interrupt controller mask") }, | |
| { HRDATAD (ISR, vc_intc.isr, 8, "Interrupt controller status") }, | |
| { HRDATAD (ACR, vc_intc.acr, 8, "Interrupt controller Auto-clear mask") }, | |
| { HRDATADF (MODE, vc_intc.mode, 8, "Interrupt controller mode", vc_ic_mode_bits) }, | |
| { HRDATA (IPTR, vc_intc.ptr, 8), REG_HRO }, | |
| { BRDATA (VEC, vc_intc.vec, 16, 32, 8) }, | |
| { BRDATAD (CRTC, vc_crtc, 16, 8, CRTC_SIZE, "CRTC registers") }, | |
| { HRDATAD (CRTCP, vc_crtc_p, 8, "CRTC pointer") }, | |
| { BRDATAD (MAP, vc_map, 16, 16, 1024, "Scanline map") }, | |
| { NULL } | |
| }; | |
| MTAB vc_mod[] = { | |
| { MTAB_XTD|MTAB_VDV, 1, NULL, "ENABLE", | |
| &vc_set_enable, NULL, NULL, "Enable VCB01 (QVSS)" }, | |
| { MTAB_XTD|MTAB_VDV, 0, NULL, "DISABLE", | |
| &vc_set_enable, NULL, NULL, "Disable VCB01 (QVSS)" }, | |
| { MTAB_XTD|MTAB_VDV, 0, "RELEASEKEY", NULL, | |
| NULL, &vid_show_release_key, NULL, "Display the window focus release key" }, | |
| { MTAB_XTD|MTAB_VDV|MTAB_VALR, 004, "ADDRESS", "ADDRESS", | |
| &set_addr, &show_addr, NULL, "Bus address" }, | |
| { MTAB_XTD|MTAB_VDV|MTAB_VALR, 0, "VECTOR", "VECTOR", | |
| &set_vec, &show_vec, NULL, "Interrupt vector" }, | |
| { 0 } | |
| }; | |
| DEVICE vc_dev = { | |
| "QVSS", &vc_unit, vc_reg, vc_mod, | |
| 1, DEV_RDX, 20, 1, DEV_RDX, 8, | |
| NULL, NULL, &vc_reset, | |
| NULL, NULL, NULL, | |
| &vc_dib, DEV_DIS | DEV_QBUS | DEV_DEBUG, 0, | |
| vc_debug, NULL, NULL, &vc_help, NULL, NULL, | |
| &vc_description | |
| }; | |
| UART2681 vc_uart = { | |
| &vc_uart_int, | |
| { { &lk_wr, &lk_rd }, { &vs_wr, &vs_rd } } | |
| }; | |
| char *vc_regnames[] = { | |
| "CSR", /* +0 */ | |
| "CUR-X", /* +2 */ | |
| "MPOS", /* +4 */ | |
| "", /* +6 spare */ | |
| "CRTCA", /* +8 */ | |
| "CRTCD", /* +10 */ | |
| "ICDR", /* +12 */ | |
| "ICSR", /* +14 */ | |
| "", /* +16 spare */ | |
| "", /* +18 spare */ | |
| "", /* +20 spare */ | |
| "", /* +22 spare */ | |
| "", /* +24 spare */ | |
| "", /* +26 spare */ | |
| "", /* +28 spare */ | |
| "", /* +30 spare */ | |
| "UART1A2A", /* +32 */ | |
| "UARTSTCLA", /* +34 */ | |
| "UARTCMDA", /* +36 */ | |
| "UARTBUFA", /* +38 */ | |
| "", /* +40 spare */ | |
| "UARTIMSK", /* +42 */ | |
| "", /* +44 spare */ | |
| "", /* +46 spare */ | |
| "UART1B2B", /* +48 */ | |
| "UARTSTCLB", /* +50 */ | |
| "UARTCMDB", /* +52 */ | |
| "UARTBUFB", /* +54 */ | |
| "", /* +56 spare */ | |
| "", /* +56 spare */ | |
| "", /* +58 spare */ | |
| "", /* +60 spare */ | |
| "", /* +62 spare */ | |
| }; | |
| t_stat vc_rd (int32 *data, int32 PA, int32 access) | |
| { | |
| uint32 rg = (PA >> 1) & 0x1F; | |
| uint32 crtc_rg, i; | |
| *data = 0; | |
| switch (rg) { | |
| case 0: /* CSR */ | |
| *data = vc_csr; | |
| break; | |
| case 1: /* Cursor X */ | |
| *data = 0; | |
| break; | |
| case 2: /* Mouse position */ | |
| *data = vc_mpos; | |
| break; | |
| case 4: /* CRTC addr ptr */ | |
| *data = vc_crtc_p; | |
| break; | |
| case 5: /* CRTC data */ | |
| crtc_rg = vc_crtc_p & CRTCP_REG; | |
| *data = vc_crtc[crtc_rg]; | |
| if ((crtc_rg == CRTC_LPPL) || (crtc_rg == CRTC_LPPH)) | |
| vc_crtc_p &= ~CRTCP_LPF; /* Clear light pen full */ | |
| break; | |
| case 6: /* ICDR */ | |
| switch ((vc_intc.mode & ICM_M_RP) >> ICM_V_RP) { | |
| case 0: /* ISR */ | |
| *data = vc_intc.isr; | |
| break; | |
| case 1: /* IMR */ | |
| *data = vc_intc.imr; | |
| break; | |
| case 2: /* IRR */ | |
| *data = vc_intc.irr; | |
| break; | |
| case 3: /* ACR */ | |
| *data = vc_intc.acr; | |
| break; | |
| } | |
| break; | |
| case 7: /* ICSR */ | |
| *data = vc_icsr | 0x40; /* Chip enabled */ | |
| *data |= (vc_intc.mode & ICM_PM) ? 0x20 : 0; /* Priority mode */ | |
| *data |= (vc_intc.mode & ICM_IM) ? 0x10 : 0; /* Interrupt mode */ | |
| *data |= (vc_intc.mode & ICM_MM) ? 0x8 : 0; /* Master mask */ | |
| if (vc_icsr & 0x80) { /* Group int pending */ | |
| for (i = 0; i < 8; i++) { | |
| if (vc_intc.isr & (1u << i)) { | |
| *data |= i; | |
| break; | |
| } | |
| } | |
| } | |
| break; | |
| case 16: /* UART mode 1A,2A */ | |
| case 17: /* UART status/clock A */ | |
| case 18: /* UART command A */ | |
| case 19: /* UART tx/rx buf A */ | |
| case 21: /* UART interrupt status/mask */ | |
| case 24: /* UART mode 1B,2B */ | |
| case 25: /* UART status/clock B */ | |
| case 26: /* UART command B */ | |
| case 27: /* UART tx/rx buf B */ | |
| *data = ua2681_rd (&vc_uart, (rg - 16)); | |
| break; | |
| default: /* Spares */ | |
| break; | |
| } /* end switch PA */ | |
| sim_debug (DBG_REG, &vc_dev, "vc_rd(%s) data=0x%04X\n", vc_regnames[(PA >> 1) & 0x1F], *data); | |
| return SCPE_OK; | |
| } | |
| t_stat vc_wr (int32 data, int32 PA, int32 access) | |
| { | |
| uint32 rg = (PA >> 1) & 0x1F; | |
| uint32 crtc_rg; | |
| sim_debug (DBG_REG, &vc_dev, "vc_wr(%s) data=0x%04X\n", vc_regnames[(PA >> 1) & 0x1F], data); | |
| switch (rg) { | |
| case 0: /* CSR */ | |
| if ((data & CSR_IEN) && ((vc_csr & CSR_IEN) == 0)) { | |
| sim_cancel (&vc_unit); /* reactivate with short delay */ | |
| sim_activate (&vc_unit, VSYNC_TIME); /* in case software checks for vsync */ | |
| } | |
| vc_csr = (vc_csr & ~CSR_RW) | (data & CSR_RW); | |
| break; | |
| case 1: /* Cursor X */ | |
| vc_curx = data; | |
| break; | |
| case 2: /* Mouse position */ | |
| break; | |
| case 4: /* CRTC addr ptr */ | |
| vc_crtc_p = (vc_crtc_p & ~CRTCP_RW) | (data & CRTCP_RW); | |
| break; | |
| case 5: /* CRTC data */ | |
| crtc_rg = vc_crtc_p & CRTCP_REG; | |
| vc_crtc[crtc_rg] = data & BMASK; | |
| break; | |
| case 6: /* ICDR */ | |
| if (vc_intc.ptr == 8) /* IMR */ | |
| vc_intc.imr = data & 0xFFFF; | |
| else if (vc_intc.ptr == 9) /* ACR */ | |
| vc_intc.acr = data & 0xFFFF; | |
| else | |
| vc_intc.vec[vc_intc.ptr] = data & 0xFFFF; /* Vector */ | |
| break; | |
| case 7: /* ICSR */ | |
| switch ((data >> 4) & 0xF) { | |
| case 0: /* Reset */ | |
| vc_intc.imr = 0xFF; | |
| vc_intc.irr = 0; | |
| vc_intc.isr = 0; | |
| vc_intc.acr = 0; | |
| break; | |
| case 2: /* Clear IRR & IMR */ | |
| if (data & 0x8) { /* one bit */ | |
| vc_intc.irr &= ~(1u << (data & 0x7)); | |
| vc_intc.imr &= ~(1u << (data & 0x7)); | |
| } | |
| else { /* all bits */ | |
| vc_intc.irr = 0; | |
| vc_intc.imr = 0; | |
| } | |
| break; | |
| case 3: /* Set IMR */ | |
| if (data & 0x8) /* one bit */ | |
| vc_intc.imr |= (1u << (data & 0x7)); | |
| else /* all bits */ | |
| vc_intc.imr = 0xFF; | |
| break; | |
| case 4: /* Clear IRR */ | |
| if (data & 0x8) /* one bit */ | |
| vc_intc.irr &= ~(1u << (data & 0x7)); | |
| else /* all bits */ | |
| vc_intc.irr = 0; | |
| break; | |
| case 6: /* Clear highest priority ISR */ | |
| break; | |
| case 7: /* Clear ISR */ | |
| if (data & 0x8) /* one bit */ | |
| vc_intc.isr &= ~(1u << (data & 0x7)); | |
| else /* all bits */ | |
| vc_intc.isr = 0; | |
| break; | |
| case 8: /* Load mode bits */ | |
| case 9: | |
| vc_intc.mode &= ~0x1F | (data & 0x1F); | |
| break; | |
| case 10: /* Control mode bits */ | |
| vc_intc.mode &= ~0x60 | ((data << 3) & 0x60); /* mode<06:05> = data<03:02> */ | |
| if (((data & 0x3) == 0x1) || ((data & 0x3) == 2)) | |
| vc_intc.mode &= ~0x80 | ((data << 7) & 0x80); | |
| break; | |
| case 11: /* Preselect IMR */ | |
| vc_intc.ptr = 8; | |
| break; | |
| case 12: /* Preselect ACR */ | |
| vc_intc.ptr = 9; | |
| break; | |
| case 14: /* Preselect response mem */ | |
| vc_intc.ptr = (data & 0x7); | |
| break; | |
| } | |
| break; | |
| case 16: /* UART mode 1A,2A */ | |
| case 17: /* UART status/clock A */ | |
| case 18: /* UART command A */ | |
| case 19: /* UART tx/rx buf A (keyboard) */ | |
| case 21: /* UART interrupt status/mask */ | |
| case 24: /* UART mode 1B,2B */ | |
| case 25: /* UART status/clock B */ | |
| case 26: /* UART command B */ | |
| case 27: /* UART tx/rx buf B (mouse) */ | |
| ua2681_wr (&vc_uart, (rg - 16), data); | |
| break; | |
| default: /* Spares */ | |
| break; | |
| } | |
| return SCPE_OK; | |
| } | |
| extern jmp_buf save_env; | |
| extern int32 p1; | |
| int32 vc_mem_rd (int32 pa) | |
| { | |
| uint32 rg = (pa >> 2) & 0xFFFF; | |
| if (!vc_buf) /* QVSS disabled? */ | |
| MACH_CHECK (MCHK_READ); /* Invalid memory reference */ | |
| return vc_buf[rg]; | |
| } | |
| void vc_mem_wr (int32 pa, int32 val, int32 lnt) | |
| { | |
| uint32 rg = (pa >> 2) & 0xFFFF; | |
| uint32 nval; | |
| int32 i; | |
| int32 sc; | |
| uint32 scrln, bufln; | |
| uint32 idx; | |
| if (!vc_buf) /* QVSS disabled? */ | |
| MACH_CHECK (MCHK_WRITE); /* Invalid memory reference */ | |
| if (lnt < L_LONG) { | |
| uint32 mask = (lnt == L_WORD)? 0xFFFF: 0xFF; | |
| uint32 t = vc_buf[rg]; | |
| sc = (pa & 3) << 3; | |
| nval = ((val & mask) << sc) | (t & ~(mask << sc)); | |
| } | |
| else nval = (uint32)val; | |
| if (rg >= 0xFFF8) { /* cursor image */ | |
| idx = (pa << 3) & 0xFF; /* get byte index */ | |
| for (i = 0; i < (lnt << 3); i++) | |
| vc_cur[idx++] = (val >> i) & 1; /* 1bpp to 8bpp */ | |
| } | |
| else if (rg >= 0xFE00) { /* scanline map */ | |
| if (vc_buf[rg] != nval) { | |
| scrln = (pa >> 1) & 0x3FF; /* screen line */ | |
| sc = (scrln & 1) ? 16 : 0; /* odd line? (upper word) */ | |
| bufln = (nval >> sc) & 0x7FF; /* buffer line */ | |
| vc_map[scrln] = bufln; /* update map */ | |
| if (lnt > L_WORD) { /* remapping 2 lines? */ | |
| scrln++; /* next screen line */ | |
| bufln = (val >> 16) & 0x7FF; /* buffer line */ | |
| vc_map[scrln] = bufln; /* update map */ | |
| } | |
| } | |
| } | |
| bufln = rg / 32; | |
| for (scrln = 0; scrln < 1024; scrln++) { | |
| if ((vc_map[scrln] & 0x7FF) == bufln) { | |
| vc_map[scrln] = vc_map[scrln] & ~VCMAP_VLD; /* invalidate map */ | |
| } | |
| } | |
| vc_buf[rg] = nval; | |
| } | |
| static SIM_INLINE void vc_invalidate (uint32 y1, uint32 y2) | |
| { | |
| uint32 ln; | |
| for (ln = y1; ln < y2; ln++) | |
| vc_map[ln] = vc_map[ln] & ~VCMAP_VLD; /* invalidate map entry */ | |
| } | |
| void vc_checkint (void) | |
| { | |
| uint32 i; | |
| uint32 msk = (vc_intc.irr & ~vc_intc.imr); /* unmasked interrutps */ | |
| vc_icsr &= ~(ICSR_GRI|ICSR_M_IRRVEC); /* clear GRI & vector */ | |
| if ((vc_intc.mode & 0x80) && ~(vc_intc.mode & 0x4)) { /* group int MM & not polled */ | |
| for (i = 0; i < 8; i++) { | |
| if (msk & (1u << i)) { | |
| vc_icsr |= (ICSR_GRI | i); | |
| } | |
| } | |
| if ((vc_csr & CSR_IEN) && (vc_icsr & ICSR_GRI)) { | |
| if (!(int_req[IPL_QVSS] & (INT_QVSS))) { | |
| sim_debug (DBG_INT, &vc_dev, "vc_checkint(SET_INT) icsr=0x%x\n", vc_icsr); | |
| } | |
| SET_INT (QVSS); | |
| } | |
| else { | |
| if ((int_req[IPL_QVSS] & (INT_QVSS))) { | |
| sim_debug (DBG_INT, &vc_dev, "vc_checkint(CLR_INT)\n"); | |
| } | |
| CLR_INT (QVSS); | |
| } | |
| } | |
| else { | |
| if ((int_req[IPL_QVSS] & (INT_QVSS))) { | |
| sim_debug (DBG_INT, &vc_dev, "vc_checkint(CLR_INT)\n"); | |
| } | |
| CLR_INT (QVSS); | |
| } | |
| } | |
| void vc_clrint (int32 src) | |
| { | |
| uint32 msk = (1u << src); | |
| vc_intc.irr &= ~msk; | |
| vc_intc.isr &= ~msk; | |
| sim_debug (msk, &vc_dev, "vc_clrint(%d)\n", src); | |
| vc_checkint (); | |
| } | |
| void vc_setint (int32 src) | |
| { | |
| uint32 msk = (1u << src); | |
| vc_intc.irr |= msk; | |
| sim_debug (msk, &vc_dev, "vc_setint(%d)\n", src); | |
| vc_checkint (); | |
| } | |
| void vc_uart_int (uint32 set) | |
| { | |
| if (set) | |
| vc_setint (IRQ_DUART); | |
| else | |
| vc_clrint (IRQ_DUART); | |
| } | |
| int32 vc_inta (void) | |
| { | |
| uint32 i; | |
| uint32 msk = (vc_intc.irr & ~vc_intc.imr); /* unmasked interrutps */ | |
| int32 result; | |
| for (i = 0; i < 8; i++) { | |
| if (msk & (1u << i)) { | |
| vc_intc.irr &= ~(1u << i); | |
| if (vc_intc.acr & (1u << i)) | |
| vc_intc.isr &= ~(1u << i); | |
| else vc_intc.isr |= (1u << i); | |
| vc_checkint(); | |
| result = (vc_intc.vec[i] + VEC_Q); | |
| sim_debug (DBG_INT, &vc_dev, "Int Ack Vector: 0%03o (0x%X)\n", result, result); | |
| return result; | |
| } | |
| } | |
| sim_debug (DBG_INT, &vc_dev, "Int Ack Vector: 0%03o\n", 0); | |
| return 0; /* no intr req */ | |
| } | |
| t_stat vc_svc (UNIT *uptr) | |
| { | |
| t_bool updated = FALSE; /* flag for refresh */ | |
| uint32 line[1024]; | |
| uint32 ln, col, off; | |
| int32 xpos, ypos, dx, dy; | |
| uint8 *cur; | |
| vc_crtc_p = vc_crtc_p ^ CRTCP_VB; /* Toggle VBI */ | |
| vc_crtc_p = vc_crtc_p | CRTCP_LPF; /* Light pen full */ | |
| if (vc_cur_v != CUR_V) { /* visibility changed? */ | |
| if (CUR_V) /* visible? */ | |
| vc_invalidate (CUR_Y, (CUR_Y + 16)); /* invalidate new pos */ | |
| else | |
| vc_invalidate (vc_cur_y, (vc_cur_y + 16)); /* invalidate old pos */ | |
| } | |
| else if (vc_cur_y != CUR_Y) { /* moved (Y)? */ | |
| vc_invalidate (CUR_Y, (CUR_Y + 16)); /* invalidate new pos */ | |
| vc_invalidate (vc_cur_y, (vc_cur_y + 16)); /* invalidate old pos */ | |
| } | |
| else if ((vc_cur_x != CUR_X) || (vc_cur_f != CUR_F)) { /* moved (X) or mask changed? */ | |
| vc_invalidate (CUR_Y, (CUR_Y + 16)); /* invalidate new pos */ | |
| } | |
| vid_cursor_x = vc_cur_x = CUR_X; /* store cursor data */ | |
| vid_cursor_y = vc_cur_y = CUR_Y; | |
| vc_cur_v = CUR_V; | |
| vc_cur_f = CUR_F; | |
| xpos = vc_mpos & 0xFF; /* get current mouse position */ | |
| ypos = (vc_mpos >> 8) & 0xFF; | |
| dx = vid_mouse_xrel; /* get relative movement */ | |
| dy = vid_mouse_yrel; | |
| if (dx > VC_MOVE_MAX) /* limit movement */ | |
| dx = VC_MOVE_MAX; | |
| else if (dx < -VC_MOVE_MAX) | |
| dx = -VC_MOVE_MAX; | |
| if (dy > VC_MOVE_MAX) | |
| dy = VC_MOVE_MAX; | |
| else if (dy < -VC_MOVE_MAX) | |
| dy = -VC_MOVE_MAX; | |
| xpos += dx; /* add to counters */ | |
| ypos += dy; | |
| vc_mpos = ((ypos & 0xFF) << 8) | (xpos & 0xFF); /* update register */ | |
| vid_mouse_xrel = 0; /* reset counters for next poll */ | |
| vid_mouse_yrel = 0; | |
| vc_csr |= (CSR_MSA | CSR_MSB | CSR_MSC); /* reset button states */ | |
| if (vid_mouse_b3) /* set new button states */ | |
| vc_csr &= ~CSR_MSA; | |
| if (vid_mouse_b2) | |
| vc_csr &= ~CSR_MSB; | |
| if (vid_mouse_b1) | |
| vc_csr &= ~CSR_MSC; | |
| for (ln = 0; ln < VC_YSIZE; ln++) { | |
| if ((vc_map[ln] & VCMAP_VLD) == 0) { /* line invalid? */ | |
| off = vc_map[ln] * 32; /* get video buf offet */ | |
| for (col = 0; col < 1024; col++) | |
| line[col] = vid_mono_palette[(vc_buf[off + (col >> 5)] >> (col & 0x1F)) & 1]; | |
| /* 1bpp to 32bpp */ | |
| if (CUR_V) { /* cursor visible? */ | |
| if ((ln >= CUR_Y) && (ln < (CUR_Y + 16))) { /* cursor on this line? */ | |
| cur = &vc_cur[((ln - CUR_Y) << 4)]; /* get image base */ | |
| for (col = 0; col < 16; col++) { | |
| if ((CUR_X + col) >= 1024) /* Part of cursor off screen? */ | |
| continue; /* Skip */ | |
| if (CUR_F) /* mask function */ | |
| line[CUR_X + col] = vid_mono_palette[(line[CUR_X + col] == vid_mono_palette[1]) | (cur[col] & 1)]; | |
| else | |
| line[CUR_X + col] = vid_mono_palette[(line[CUR_X + col] == vid_mono_palette[1]) & (~cur[col] & 1)]; | |
| } | |
| } | |
| } | |
| vid_draw (0, ln, 1024, 1, &line[0]); /* update line */ | |
| updated = TRUE; | |
| vc_map[ln] = vc_map[ln] | VCMAP_VLD; /* set valid */ | |
| } | |
| } | |
| if (updated) /* video updated? */ | |
| vid_refresh (); /* put to screen */ | |
| ua2681_svc (&vc_uart); /* service DUART */ | |
| vc_setint (IRQ_VSYNC); /* VSYNC int */ | |
| sim_clock_coschedule (uptr, tmxr_poll); /* reactivate */ | |
| return SCPE_OK; | |
| } | |
| t_stat vc_reset (DEVICE *dptr) | |
| { | |
| uint32 i; | |
| t_stat r; | |
| CLR_INT (QVSS); /* clear int req */ | |
| sim_cancel (&vc_unit); /* stop poll */ | |
| ua2681_reset (&vc_uart); /* reset DUART */ | |
| vc_intc.ptr = 0; /* interrupt controller */ | |
| vc_intc.irr = 0; | |
| vc_intc.imr = 0xFF; | |
| vc_intc.isr = 0; | |
| vc_intc.acr = 0; | |
| vc_intc.mode = 0x80; | |
| vc_icsr = 0; | |
| vc_csr = (((QVMBASE >> QVMAWIDTH) & ((1<<CSR_S_MA)-1)) << CSR_V_MA) | CSR_MOD; | |
| vc_curx = 0; | |
| vc_mpos = 0; | |
| for (i = 0; i < CRTC_SIZE; i++) | |
| vc_crtc[i] = 0; | |
| vc_crtc[CRTC_CSCS] = 0x20; /* hide cursor */ | |
| vc_crtc_p = (CRTCP_LPF | CRTCP_VB); | |
| if (dptr->flags & DEV_DIS) { | |
| free (vc_buf); | |
| vc_buf = NULL; | |
| return vid_close (); | |
| } | |
| if (!vid_active) { | |
| r = vid_open (dptr, VC_XSIZE, VC_YSIZE); /* display size */ | |
| if (r != SCPE_OK) | |
| return r; | |
| vc_buf = (uint32 *) calloc (VC_MEMSIZE, sizeof (uint32)); | |
| if (vc_buf == NULL) { | |
| vid_close (); | |
| return SCPE_MEM; | |
| } | |
| sim_printf ("QVSS Display Created. "); | |
| vid_show_release_key (stdout, NULL, 0, NULL); | |
| if (sim_log) | |
| vid_show_release_key (sim_log, NULL, 0, NULL); | |
| sim_printf ("\n"); | |
| } | |
| sim_activate_abs (&vc_unit, tmxr_poll); | |
| return auto_config (NULL, 0); /* run autoconfig */ | |
| } | |
| t_stat vc_set_enable (UNIT *uptr, int32 val, char *cptr, void *desc) | |
| { | |
| return cpu_set_model (NULL, 0, (val ? "VAXSTATION" : "MICROVAX"), NULL); | |
| } | |
| t_stat vc_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
| { | |
| fprintf (st, "VCB01 Monochrome Video Subsystem (%s)\n\n", dptr->name); | |
| fprintf (st, "Use the Control-Right-Shift key combination to regain focus from the simulated\n"); | |
| fprintf (st, "video display\n"); | |
| fprint_set_help (st, dptr); | |
| fprint_show_help (st, dptr); | |
| fprint_reg_help (st, dptr); | |
| return SCPE_OK; | |
| } | |
| char *vc_description (DEVICE *dptr) | |
| { | |
| return "VCB01 Monochrome Graphics Adapter"; | |
| } | |
| #endif /* !VAX_620 */ |