sim_frontpanel.h - emulators/simh - Rivoreo Source Code Repositories

 /* sim_frontpanel.h: simulator frontpanel API definitions

    Copyright (c) 2015, Mark Pizzolato

    Permission is hereby granted, free of charge, to any person obtaining a
    copy of this software and associated documentation files (the "Software"),
    to deal in the Software without restriction, including without limitation
    the rights to use, copy, modify, merge, publish, distribute, sublicense,
    and/or sell copies of the Software, and to permit persons to whom the
    Software is furnished to do so, subject to the following conditions:

    The above copyright notice and this permission notice shall be included in
    all copies or substantial portions of the Software.

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    MARK PIZZOLATO BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
    IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
    CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

    Except as contained in this notice, the name of Mark Pizzolato shall not be
    used in advertising or otherwise to promote the sale, use or other dealings
    in this Software without prior written authorization from Mark Pizzolato.

    15-Jan-15    MP      Initial implementation
    01-Apr-15    MP      Added register indirect, mem_examine and mem_deposit
    03-Apr-15    MP      Added logic to pass simulator startup messages in
                         panel error text if the connection to the simulator
                         shuts down while it is starting.
    04-Apr-15    MP      Added mount and dismount routines to connect and
                         disconnect removable media

    This module defines interface between a front panel application and a simh
    simulator.  Facilities provide ways to gather information from and to
    observe and control the state of a simulator.

    Any application which wants to use this API needs to:
       1) include this file in the application code
       2) compile sim_frontpanel.c and sim_sock.c from the top level directory
          of the simh source.
       3) link the sim_frontpanel and sim_sock object modules and libpthreads
          into the application.
       4) Use a simh simulator built from the same version of simh that the
          sim_frontpanel and sim_sock modules came from.

 */

 #ifndef SIM_FRONTPANEL_H_
 #define SIM_FRONTPANEL_H_     0

 #ifdef  __cplusplus
 extern "C" {
 #endif

 #include <stdlib.h>

 #if !defined(__VAX)         /* Unsupported platform */

 #define SIM_FRONTPANEL_VERSION   2

 /**

     sim_panel_start_simulator       A starts a simulator with a particular
                                     configuration

         sim_path            the path to the simulator binary
         sim_config          the configuration to run the simulator with
         device_panel_count  the number of sub panels for connected devices

     Note 1: - The path specified must be either a fully specified path or
               it could be merey the simulator name if the simulator binary
               is located in the current PATH.
             - The simulator binary must be built from the same version
               simh source code that the frontpanel API was acquired fron
               (the API and the simh framework must speak the same language)

     Note 2: - Configuration file specified should contain device setup
               statements (enable, disable, CPU types and attach commands).
               It should not start a simulator running.

  */

 typedef struct PANEL PANEL;

 PANEL *
 sim_panel_start_simulator (const char *sim_path,
                            const char *sim_config,
                            size_t device_panel_count);

 PANEL *
 sim_panel_start_simulator_debug (const char *sim_path,
                                  const char *sim_config,
                                  size_t device_panel_count,
                                  const char *debug_file);

 /**

     sim_panel_add_device_panel - creates a sub panel associated
                                  with a specific simulator panel

         simulator_panel     the simulator panel to connect to
         device_name         the simulator's name for the device

  */
 PANEL *
 sim_panel_add_device_panel (PANEL *simulator_panel,
                             const char *device_name);

 /**

     sim_panel_destroy   to shutdown a panel or sub panel.

     Note: destroying a simulator panel will also destroy any
           related sub panels

  */
 int
 sim_panel_destroy (PANEL *panel);

 /**

    The frontpanel API exposes the state of a simulator via access to
    simh register variables that the simulator and its devices define.
    These registers certainly include any architecturally described
    registers (PC, PSL, SP, etc.), but also include anything else
    the simulator uses as internal state to implement the running
    simulator.

    The registers that a particular frontpanel application mught need
    access to are described by the application by calling:

    sim_panel_add_register
    sim_panel_add_register_array
 and
    sim_panel_add_register_indirect

         name         the name the simulator knows this register by
         device_name  the device this register is part of.  Defaults to
                      the device of the panel (in a device panel) or the
                      default device in the simulator (usually the CPU).
         element_count number of elements in the register array
         size         the size (in local storage) of the buffer which will
                      receive the data in the simulator's register
         addr         a pointer to the location of the buffer which will
                      be loaded with the data in the simulator's register

  */
 int
 sim_panel_add_register (PANEL *panel,
                         const char *name,
                         const char *device_name,
                         size_t size,
                         void *addr);

 int
 sim_panel_add_register_array (PANEL *panel,
                               const char *name,
                               const char *device_name,
                               size_t element_count,
                               size_t size,
                               void *addr);

 int
 sim_panel_add_register_indirect (PANEL *panel,
                                  const char *name,
                                  const char *device_name,
                                  size_t size,
                                  void *addr);
 /**

     A panel application has a choice of two different methods of getting
     the values contained in the set of registers it has declared interest in via
     the sim_panel_add_register API.

        1)  The values can be polled (when ever it is desired) by calling
            sim_panel_get_registers().
        2)  The panel can call sim_panel_set_display_callback() to specify a
            callback routine and a periodic rate that the callback routine
            should be called.  The panel API will make a best effort to deliver
            the current register state at the desired rate.


    Note 1: The buffers described in a panel's register set will be
            dynamically revised as soon as data is available from the
            simulator.  The callback routine merely serves as a notification
            that a complete register set has arrived.
    Note 2: The callback routine should, in general, not run for a long time
            or frontpanel interactions with the simulator may be disrupted.
            Setting a flag, signaling an event or posting a message are
            reasonable activities to perform in a callback routine.

  */
 int
 sim_panel_get_registers (PANEL *panel, unsigned long long *simulation_time);

 /**


  */
 typedef void (*PANEL_DISPLAY_PCALLBACK)(PANEL *panel,
                                         unsigned long long simulation_time,
                                         void *context);

 int
 sim_panel_set_display_callback (PANEL *panel,
                                 PANEL_DISPLAY_PCALLBACK callback,
                                 void *context,
                                 int callbacks_per_second);

 /**

     When a front panel application needs to change the running
     state of a simulator one of the following routines should
     be called:

     sim_panel_exec_halt     - Stop instruction execution
     sim_panel_exec_boot     - Boot a simulator from a specific device
     sim_panel_exec_run      - Start/Resume a simulator running instructions
     sim_panel_exec_step     - Have a simulator execute a single step

  */
 int
 sim_panel_exec_halt (PANEL *panel);

 int
 sim_panel_exec_boot (PANEL *panel, const char *device);

 int
 sim_panel_exec_run (PANEL *panel);

 int
 sim_panel_exec_step (PANEL *panel);

 /**

     When a front panel application wants to describe conditions that
     should stop instruction execution an execution or an output
     should be used.  To established or clear a breakpoint, one of
     the following routines should be called:

     sim_panel_break_set          - Establish a simulation breakpoint
     sim_panel_break_clear        - Cancel/Delete a previously defined
                                    breakpoint
     sim_panel_break_output_set   - Establish a simulator output
                                    breakpoint
     sim_panel_break_output_clear - Cancel/Delete a previously defined
                                    output breakpoint

     Note: Any breakpoint switches/flags must be located at the
           beginning of the condition string

  */

 int
 sim_panel_break_set (PANEL *panel, const char *condition);

 int
 sim_panel_break_clear (PANEL *panel, const char *condition);

 int
 sim_panel_break_output_set (PANEL *panel, const char *condition);

 int
 sim_panel_break_output_clear (PANEL *panel, const char *condition);


 /**

     When a front panel application needs to change or access
     memory or a register one of the following routines should
     be called:

     sim_panel_gen_examine        - Examine register or memory
     sim_panel_gen_deposit        - Deposit to register or memory
     sim_panel_mem_examine        - Examine memory location
     sim_panel_mem_deposit        - Deposit to memory location
     sim_panel_set_register_value - Deposit to a register or memory
                                    location

  */


 /**

    sim_panel_gen_examine

         name_or_addr the name the simulator knows this register by
         size         the size (in local storage) of the buffer which will
                      receive the data returned when examining the simulator
         value        a pointer to the buffer which will be loaded with the
                      data returned when examining the simulator
  */

 int
 sim_panel_gen_examine (PANEL *panel,
                        const char *name_or_addr,
                        size_t size,
                        void *value);
 /**

    sim_panel_gen_deposit

         name_or_addr the name the simulator knows this register by
         size         the size (in local storage) of the buffer which
                      contains the data to be deposited into the simulator
         value        a pointer to the buffer which contains the data to
                      be deposited into the simulator
  */

 int
 sim_panel_gen_deposit (PANEL *panel,
                        const char *name_or_addr,
                        size_t size,
                        const void *value);

 /**

    sim_panel_mem_examine

         addr_size    the size (in local storage) of the buffer which
                      contains the memory address of the data to be examined
                      in the simulator
         addr         a pointer to the buffer containing the memory address
                      of the data to be examined in the simulator
         value_size   the size (in local storage) of the buffer which will
                      receive the data returned when examining the simulator
         value        a pointer to the buffer which will be loaded with the
                      data returned when examining the simulator
  */

 int
 sim_panel_mem_examine (PANEL *panel,
                        size_t addr_size,
                        const void *addr,
                        size_t value_size,
                        void *value);

 /**

    sim_panel_mem_deposit

         addr_size    the size (in local storage) of the buffer which
                      contains the memory address of the data to be deposited
                      into the simulator
         addr         a pointer to the buffer containing the memory address
                      of the data to be deposited into the simulator
         value_size   the size (in local storage) of the buffer which will
                      contains the data to be deposited into the simulator
         value        a pointer to the buffer which contains the data to be
                      deposited into the simulator
  */

 int
 sim_panel_mem_deposit (PANEL *panel,
                        size_t addr_size,
                        const void *addr,
                        size_t value_size,
                        const void *value);

 /**
    sim_panel_set_register_value

         name        the name of a simulator register or a memory address
                     which is to receive a new value
         value       the new value in character string form.  The string
                     must be in the native/natural radix that the simulator
                     uses when referencing that register

  */
 int
 sim_panel_set_register_value (PANEL *panel,
                               const char *name,
                               const char *value);

 /**

     When a front panel application may needs to change the media
     in a simulated removable media device one of the following
     routines should be called:

     sim_panel_mount    - mounts the indicated media file on a device
     sim_panel_dismount - dismounts the currently mounted media file
                          from a device

  */

 /**
    sim_panel_mount

         device      the name of a simulator device/unit
         switches    any switches appropriate for the desire attach
         path        the path on the local system to be attached

  */
 int
 sim_panel_mount (PANEL *panel,
                  const char *device,
                  const char *switches,
                  const char *path);

 /**
    sim_panel_dismount

         device      the name of a simulator device/unit

  */
 int
 sim_panel_dismount (PANEL *panel,
                     const char *device);


 typedef enum {
     Halt,       /* Simulation is halted (instructions not being executed) */
     Run,        /* Simulation is executing instructions */
     Error       /* Panel simulator is in an error state and should be */
                 /* closed (destroyed).  sim_panel_get_error might help */
                 /* explain why */
     } OperationalState;

 OperationalState
 sim_panel_get_state (PANEL *panel);

 /**

     All APIs routines which return an int return 0 for
     success and -1 for an error.

     An API which returns an error (-1), will not change the panel state.

     sim_panel_get_error     - the details of the most recent error
     sim_panel_clear_error   - clears the error buffer

  */

 const char *sim_panel_get_error (void);
 void sim_panel_clear_error (void);

 /**

     The panek<->simulator wire protocol can be traced if protocol problems arise.

     sim_panel_set_debug_file    - Specifies the log file to record debug traffic
     sim_panel_set_debug_mode    - Specifies the debug detail to be recorded
     sim_panel_flush_debug       - Flushes debug output to disk

  */
 void
 sim_panel_set_debug_file (PANEL *panel, const char *debug_file);

 #define DBG_XMT         1   /* Transmit Data */
 #define DBG_RCV         2   /* Receive Data */

 void
 sim_panel_set_debug_mode (PANEL *panel, int debug_bits);

 void
 sim_panel_flush_debug (PANEL *panel);

 #endif /* !defined(__VAX) */

 #ifdef  __cplusplus
 }
 #endif

 #endif /* SIM_FRONTPANEL_H_ */
	/* sim_frontpanel.h: simulator frontpanel API definitions

	Copyright (c) 2015, Mark Pizzolato

	Permission is hereby granted, free of charge, to any person obtaining a
	copy of this software and associated documentation files (the "Software"),
	to deal in the Software without restriction, including without limitation
	the rights to use, copy, modify, merge, publish, distribute, sublicense,
	and/or sell copies of the Software, and to permit persons to whom the
	Software is furnished to do so, subject to the following conditions:

	The above copyright notice and this permission notice shall be included in
	all copies or substantial portions of the Software.

	THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
	FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
	MARK PIZZOLATO BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
	IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
	CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

	Except as contained in this notice, the name of Mark Pizzolato shall not be
	used in advertising or otherwise to promote the sale, use or other dealings
	in this Software without prior written authorization from Mark Pizzolato.

	15-Jan-15 MP Initial implementation
	01-Apr-15 MP Added register indirect, mem_examine and mem_deposit
	03-Apr-15 MP Added logic to pass simulator startup messages in
	panel error text if the connection to the simulator
	shuts down while it is starting.
	04-Apr-15 MP Added mount and dismount routines to connect and
	disconnect removable media

	This module defines interface between a front panel application and a simh
	simulator. Facilities provide ways to gather information from and to
	observe and control the state of a simulator.

	Any application which wants to use this API needs to:
	1) include this file in the application code
	2) compile sim_frontpanel.c and sim_sock.c from the top level directory
	of the simh source.
	3) link the sim_frontpanel and sim_sock object modules and libpthreads
	into the application.
	4) Use a simh simulator built from the same version of simh that the
	sim_frontpanel and sim_sock modules came from.

	*/

	#ifndef SIM_FRONTPANEL_H_
	#define SIM_FRONTPANEL_H_ 0

	#ifdef __cplusplus
	extern "C" {
	#endif

	#include <stdlib.h>

	#if !defined(__VAX) /* Unsupported platform */

	#define SIM_FRONTPANEL_VERSION 2

	/**

	sim_panel_start_simulator A starts a simulator with a particular
	configuration

	sim_path the path to the simulator binary
	sim_config the configuration to run the simulator with
	device_panel_count the number of sub panels for connected devices

	Note 1: - The path specified must be either a fully specified path or
	it could be merey the simulator name if the simulator binary
	is located in the current PATH.
	- The simulator binary must be built from the same version
	simh source code that the frontpanel API was acquired fron
	(the API and the simh framework must speak the same language)

	Note 2: - Configuration file specified should contain device setup
	statements (enable, disable, CPU types and attach commands).
	It should not start a simulator running.

	*/

	typedef struct PANEL PANEL;

	PANEL *
	sim_panel_start_simulator (const char *sim_path,
	const char *sim_config,
	size_t device_panel_count);

	PANEL *
	sim_panel_start_simulator_debug (const char *sim_path,
	const char *sim_config,
	size_t device_panel_count,
	const char *debug_file);

	/**

	sim_panel_add_device_panel - creates a sub panel associated
	with a specific simulator panel

	simulator_panel the simulator panel to connect to
	device_name the simulator's name for the device

	*/
	PANEL *
	sim_panel_add_device_panel (PANEL *simulator_panel,
	const char *device_name);

	/**

	sim_panel_destroy to shutdown a panel or sub panel.

	Note: destroying a simulator panel will also destroy any
	related sub panels

	*/
	int
	sim_panel_destroy (PANEL *panel);

	/**

	The frontpanel API exposes the state of a simulator via access to
	simh register variables that the simulator and its devices define.
	These registers certainly include any architecturally described
	registers (PC, PSL, SP, etc.), but also include anything else
	the simulator uses as internal state to implement the running
	simulator.

	The registers that a particular frontpanel application mught need
	access to are described by the application by calling:

	sim_panel_add_register
	sim_panel_add_register_array
	and
	sim_panel_add_register_indirect

	name the name the simulator knows this register by
	device_name the device this register is part of. Defaults to
	the device of the panel (in a device panel) or the
	default device in the simulator (usually the CPU).
	element_count number of elements in the register array
	size the size (in local storage) of the buffer which will
	receive the data in the simulator's register
	addr a pointer to the location of the buffer which will
	be loaded with the data in the simulator's register

	*/
	int
	sim_panel_add_register (PANEL *panel,
	const char *name,
	const char *device_name,
	size_t size,
	void *addr);

	int
	sim_panel_add_register_array (PANEL *panel,
	const char *name,
	const char *device_name,
	size_t element_count,
	size_t size,
	void *addr);

	int
	sim_panel_add_register_indirect (PANEL *panel,
	const char *name,
	const char *device_name,
	size_t size,
	void *addr);
	/**

	A panel application has a choice of two different methods of getting
	the values contained in the set of registers it has declared interest in via
	the sim_panel_add_register API.

	1) The values can be polled (when ever it is desired) by calling
	sim_panel_get_registers().
	2) The panel can call sim_panel_set_display_callback() to specify a
	callback routine and a periodic rate that the callback routine
	should be called. The panel API will make a best effort to deliver
	the current register state at the desired rate.


	Note 1: The buffers described in a panel's register set will be
	dynamically revised as soon as data is available from the
	simulator. The callback routine merely serves as a notification
	that a complete register set has arrived.
	Note 2: The callback routine should, in general, not run for a long time
	or frontpanel interactions with the simulator may be disrupted.
	Setting a flag, signaling an event or posting a message are
	reasonable activities to perform in a callback routine.

	*/
	int
	sim_panel_get_registers (PANEL panel, unsigned long long simulation_time);

	/**


	*/
	typedef void (PANEL_DISPLAY_PCALLBACK)(PANEL panel,
	unsigned long long simulation_time,
	void *context);

	int
	sim_panel_set_display_callback (PANEL *panel,
	PANEL_DISPLAY_PCALLBACK callback,
	void *context,
	int callbacks_per_second);

	/**

	When a front panel application needs to change the running
	state of a simulator one of the following routines should
	be called:

	sim_panel_exec_halt - Stop instruction execution
	sim_panel_exec_boot - Boot a simulator from a specific device
	sim_panel_exec_run - Start/Resume a simulator running instructions
	sim_panel_exec_step - Have a simulator execute a single step

	*/
	int
	sim_panel_exec_halt (PANEL *panel);

	int
	sim_panel_exec_boot (PANEL panel, const char device);

	int
	sim_panel_exec_run (PANEL *panel);

	int
	sim_panel_exec_step (PANEL *panel);

	/**

	When a front panel application wants to describe conditions that
	should stop instruction execution an execution or an output
	should be used. To established or clear a breakpoint, one of
	the following routines should be called:

	sim_panel_break_set - Establish a simulation breakpoint
	sim_panel_break_clear - Cancel/Delete a previously defined
	breakpoint
	sim_panel_break_output_set - Establish a simulator output
	breakpoint
	sim_panel_break_output_clear - Cancel/Delete a previously defined
	output breakpoint

	Note: Any breakpoint switches/flags must be located at the
	beginning of the condition string

	*/

	int
	sim_panel_break_set (PANEL panel, const char condition);

	int
	sim_panel_break_clear (PANEL panel, const char condition);

	int
	sim_panel_break_output_set (PANEL panel, const char condition);

	int
	sim_panel_break_output_clear (PANEL panel, const char condition);


	/**

	When a front panel application needs to change or access
	memory or a register one of the following routines should
	be called:

	sim_panel_gen_examine - Examine register or memory
	sim_panel_gen_deposit - Deposit to register or memory
	sim_panel_mem_examine - Examine memory location
	sim_panel_mem_deposit - Deposit to memory location
	sim_panel_set_register_value - Deposit to a register or memory
	location

	*/


	/**

	sim_panel_gen_examine

	name_or_addr the name the simulator knows this register by
	size the size (in local storage) of the buffer which will
	receive the data returned when examining the simulator
	value a pointer to the buffer which will be loaded with the
	data returned when examining the simulator
	*/

	int
	sim_panel_gen_examine (PANEL *panel,
	const char *name_or_addr,
	size_t size,
	void *value);
	/**

	sim_panel_gen_deposit

	name_or_addr the name the simulator knows this register by
	size the size (in local storage) of the buffer which
	contains the data to be deposited into the simulator
	value a pointer to the buffer which contains the data to
	be deposited into the simulator
	*/

	int
	sim_panel_gen_deposit (PANEL *panel,
	const char *name_or_addr,
	size_t size,
	const void *value);

	/**

	sim_panel_mem_examine

	addr_size the size (in local storage) of the buffer which
	contains the memory address of the data to be examined
	in the simulator
	addr a pointer to the buffer containing the memory address
	of the data to be examined in the simulator
	value_size the size (in local storage) of the buffer which will
	receive the data returned when examining the simulator
	value a pointer to the buffer which will be loaded with the
	data returned when examining the simulator
	*/

	int
	sim_panel_mem_examine (PANEL *panel,
	size_t addr_size,
	const void *addr,
	size_t value_size,
	void *value);

	/**

	sim_panel_mem_deposit

	addr_size the size (in local storage) of the buffer which
	contains the memory address of the data to be deposited
	into the simulator
	addr a pointer to the buffer containing the memory address
	of the data to be deposited into the simulator
	value_size the size (in local storage) of the buffer which will
	contains the data to be deposited into the simulator
	value a pointer to the buffer which contains the data to be
	deposited into the simulator
	*/

	int
	sim_panel_mem_deposit (PANEL *panel,
	size_t addr_size,
	const void *addr,
	size_t value_size,
	const void *value);

	/**
	sim_panel_set_register_value

	name the name of a simulator register or a memory address
	which is to receive a new value
	value the new value in character string form. The string
	must be in the native/natural radix that the simulator
	uses when referencing that register

	*/
	int
	sim_panel_set_register_value (PANEL *panel,
	const char *name,
	const char *value);

	/**

	When a front panel application may needs to change the media
	in a simulated removable media device one of the following
	routines should be called:

	sim_panel_mount - mounts the indicated media file on a device
	sim_panel_dismount - dismounts the currently mounted media file
	from a device

	*/

	/**
	sim_panel_mount

	device the name of a simulator device/unit
	switches any switches appropriate for the desire attach
	path the path on the local system to be attached

	*/
	int
	sim_panel_mount (PANEL *panel,
	const char *device,
	const char *switches,
	const char *path);

	/**
	sim_panel_dismount

	device the name of a simulator device/unit

	*/
	int
	sim_panel_dismount (PANEL *panel,
	const char *device);


	typedef enum {
	Halt, /* Simulation is halted (instructions not being executed) */
	Run, /* Simulation is executing instructions */
	Error /* Panel simulator is in an error state and should be */
	/* closed (destroyed). sim_panel_get_error might help */
	/* explain why */
	} OperationalState;

	OperationalState
	sim_panel_get_state (PANEL *panel);

	/**

	All APIs routines which return an int return 0 for
	success and -1 for an error.

	An API which returns an error (-1), will not change the panel state.

	sim_panel_get_error - the details of the most recent error
	sim_panel_clear_error - clears the error buffer

	*/

	const char *sim_panel_get_error (void);
	void sim_panel_clear_error (void);

	/**

	The panek<->simulator wire protocol can be traced if protocol problems arise.

	sim_panel_set_debug_file - Specifies the log file to record debug traffic
	sim_panel_set_debug_mode - Specifies the debug detail to be recorded
	sim_panel_flush_debug - Flushes debug output to disk

	*/
	void
	sim_panel_set_debug_file (PANEL panel, const char debug_file);

	#define DBG_XMT 1 /* Transmit Data */
	#define DBG_RCV 2 /* Receive Data */

	void
	sim_panel_set_debug_mode (PANEL *panel, int debug_bits);

	void
	sim_panel_flush_debug (PANEL *panel);

	#endif /* !defined(__VAX) */

	#ifdef __cplusplus
	}
	#endif

	#endif /* SIM_FRONTPANEL_H_ */