Rivoreo Source Code Repositories
src.rivoreo.one / emulators / simh / 53d02f7fa757bb9149bda8e5f3dce05aa83d5d21 / . / I7094 / i7094_com.c
blob: ea4e87286e925b47fb26d4660fc1543d5bfe76f2 [file] [log] [blame] [raw]
/* i7094_com.c: IBM 7094 7750 communications interface simulator
Copyright (c) 2005-2006, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
com 7750 controller
coml 7750 lines
This module implements an abstract simulator for the IBM 7750 communications
computer as used by the CTSS system. The 7750 supports up to 112 lines;
the simulator supports 33. The 7750 can handle both high-speed lines, in
6b and 12b mode, and normal terminals, in 12b mode only; the simulator
supports only terminals. The 7750 can handle many different kinds of
terminals; the simulator supports only a limited subset.
Input is asynchronous. The 7750 sets ATN1 to signal availability of input.
When the 7094 issues a CTLRN, the 7750 gathers available input characters
into a message. The message has a 12b sequence number, followed by 12b line
number/character pairs, followed by end-of-medium (03777). Input characters
can either be control characters (bit 02000 set) or data characters. Data
characters are 1's complemented and are 8b wide: 7 data bits and 1 parity
bit (which may be 0).
Output is synchronous. When the 7094 issues a CTLWN, the 7750 interprets
the channel output as a message. The message has a 12b line number, followed
by a 12b character count, followed by characters, followed by end-of-medium.
If bit 02000 of the line number is set, the characters are 12b wide. If
bit 01000 is set, the message is a control message. 12b characters consist
of 7 data bits, 1 parity bit, and 1 start bit. Data characters are 1's
complemented. Data character 03777 is special and causes the 7750 to
repeat the previous bit for the number of bit times specified in the next
character. This is used to generate delays for positioning characters.
The 7750 supports flow control for output. To help the 7094 account for
usage of 7750 buffer memory, the 7750 sends 'character output completion'
messages for every 'n' characters output on a line, where n <= 31.
Note that the simulator console is mapped in as line n+1.
*/
#include "i7094_defs.h"
#include "sim_sock.h"
#include "sim_tmxr.h"
#include <ctype.h>
#define COM_MLINES 32 /* mux lines */
#define COM_TLINES (COM_MLINES + 1) /* total lines */
#define COM_BUFSIZ 120 /* max chan transfer */
#define COM_PKTSIZ 16384 /* character buffer */
#define UNIT_V_2741 (TTUF_V_UF + 0) /* 2741 - ni */
#define UNIT_V_K35 (TTUF_V_UF + 1) /* KSR-35 */
#define UNIT_2741 (1 << UNIT_V_2741)
#define UNIT_K35 (1 << UNIT_V_K35)
#define CONN u3 /* line is connected */
#define NEEDID u4 /* need to send ID */
#define COM_INIT_POLL 8000 /* polling interval */
#define COMC_WAIT 2 /* channel delay time */
#define COML_WAIT 1000 /* char delay time */
#define COM_LBASE 4 /* start of lines */
/* Input threads */
#define COM_PLU 0 /* multiplexor poll */
#define COM_CIU 1 /* console input */
#define COM_CHU 2 /* channel transfer */
#define COM_SNS 3 /* sense transfer */
/* Communications input */
#define COMI_VALIDL 02000 /* valid line flag */
#define COMI_PARITY 00200 /* parity bit */
#define COMI_DIALUP 02001 /* dialup */
#define COMI_ENDID 02002 /* end ID */
#define COMI_INTR 02003 /* interrupt */
#define COMI_QUIT 02004 /* quit */
#define COMI_HANGUP 02005 /* hangup */
#define COMI_EOM 03777 /* end of medium */
#define COMI_COMP(x) ((uint16) (03000 + ((x) & COMI_CMAX)))
#define COMI_K35 1 /* KSR-35 ID */
#define COMI_K37 7 /* KSR-37 ID */
#define COMI_2741 8 /* 2741 ID */
#define COMI_CMAX 31 /* max chars returned */
#define COMI_BMAX 50 /* buffer max, words */
#define COMI_12BMAX ((3 * COMI_BMAX) - 1) /* last 12b char */
/* Communications output */
#define COMO_LIN12B 0200000000000 /* line is 12b */
#define COMO_LINCTL 0100000000000 /* control msg */
#define COMO_GETLN(x) (((uint32) ((x) >> 24)) & 0777)
#define COMO_CTLRST 0000077770000 /* control reset */
#define COMO_BITRPT 03777 /* bit repeat */
#define COMO_EOM12B 07777 /* end of medium */
#define COMO_BMAX 94 /* buffer max, words */
#define COMO_12BMAX ((3 * COMO_BMAX) - 1)
/* Status word (60b) */
#define COMS_PCHK 004000000000000000000 /* prog check */
#define COMS_DCHK 002000000000000000000 /* data check */
#define COMS_EXCC 001000000000000000000 /* exc cond */
#define COMS_MLNT 000040000000000000000 /* message length check */
#define COMS_CHNH 000020000000000000000 /* channel hold */
#define COMS_CHNQ 000010000000000000000 /* channel queue full */
#define COMS_ITMO 000000100000000000000 /* interface timeout */
#define COMS_DATR 000000004000000000000 /* data message ready */
#define COMS_INBF 000000002000000000000 /* input buffer free */
#define COMS_SVCR 000000001000000000000 /* service message ready */
#define COMS_PALL 000000000000000000000
#define COMS_DALL 000000000000000000000
#define COMS_EALL 000000000000000000000
#define COMS_DYN 000000007000000000000
/* Report variables */
#define COMR_FQ 1 /* free queue */
#define COMR_IQ 2 /* input queue */
#define COMR_OQ 4 /* output queue */
/* List heads and entries */
typedef struct {
uint16 head;
uint16 tail;
} LISTHD;
typedef struct {
uint16 next;
uint16 data;
} LISTENT;
/* The 7750 character buffer is maintained as linked lists. The lists are:
free free list
inpq input queue
outq[ln] output queue for line ln
The input queue has two entries for each character; the first is the
line number, the second the character. The output queues have only
one entry for each character.
Links are done as subscripts in array com_pkt. This allows the list
headers and the queues themselves to be saved and restored. */
uint32 com_ch = CH_E; /* saved channel */
uint32 com_enab = 0; /* 7750 enabled */
uint32 com_msgn = 0; /* next input msg num */
uint32 com_sta = 0; /* 7750 state */
uint32 com_stop = 0; /* channel stop */
uint32 com_quit = 0; /* quit code */
uint32 com_intr = 0; /* interrupt code */
uint32 com_bptr = 0; /* buffer pointer */
uint32 com_blim = 0; /* buffer count */
uint32 com_tps = 50; /* polls/second */
uint32 com_not_ret[COM_TLINES] = { 0 }; /* chars not returned */
t_uint64 com_sns = 0; /* sense word */
t_uint64 com_chob = 0; /* chan output buf */
uint32 com_chob_v = 0; /* valid flag */
t_uint64 com_buf[COM_BUFSIZ]; /* channel buffer */
LISTHD com_free; /* free list */
LISTHD com_inpq; /* input queue */
LISTHD com_outq[COM_TLINES]; /* output queue */
LISTENT com_pkt[COM_PKTSIZ]; /* character packets */
TMLN com_ldsc[COM_MLINES] = { 0 }; /* line descriptors */
TMXR com_desc = { COM_MLINES, 0, 0, com_ldsc }; /* mux descriptor */
/* Even parity truth table */
static const uint8 com_epar[128] = {
0, 1, 1, 0, 1, 0, 0, 1,
1, 0, 0, 1, 0, 1, 1, 0,
1, 0, 0, 1, 0, 1, 1, 0,
0, 1, 1, 0, 1, 0, 0, 1,
1, 0, 0, 1, 0, 1, 1, 0,
0, 1, 1, 0, 1, 0, 0, 1,
0, 1, 1, 0, 1, 0, 0, 1,
1, 0, 0, 1, 0, 1, 1, 0,
1, 0, 0, 1, 0, 1, 1, 0,
0, 1, 1, 0, 1, 0, 0, 1,
0, 1, 1, 0, 1, 0, 0, 1,
1, 0, 0, 1, 0, 1, 1, 0,
0, 1, 1, 0, 1, 0, 0, 1,
1, 0, 0, 1, 0, 1, 1, 0,
1, 0, 0, 1, 0, 1, 1, 0,
0, 1, 1, 0, 1, 0, 0, 1
};
extern uint32 ch_req;
t_stat com_chsel (uint32 ch, uint32 sel, uint32 unit);
t_stat com_chwr (uint32 ch, t_uint64 val, uint32 flags);
t_stat comi_svc (UNIT *uptr);
t_stat comc_svc (UNIT *uptr);
t_stat como_svc (UNIT *uptr);
t_stat coms_svc (UNIT *uptr);
t_stat comti_svc (UNIT *uptr);
t_stat comto_svc (UNIT *uptr);
t_stat com_reset (DEVICE *dptr);
t_stat com_attach (UNIT *uptr, char *cptr);
t_stat com_detach (UNIT *uptr);
t_stat com_summ (FILE *st, UNIT *uptr, int32 val, void *desc);
t_stat com_show (FILE *st, UNIT *uptr, int32 val, void *desc);
t_stat com_show_ctrl (FILE *st, UNIT *uptr, int32 val, void *desc);
t_stat com_show_freeq (FILE *st, UNIT *uptr, int32 val, void *desc);
t_stat com_show_inq (FILE *st, UNIT *uptr, int32 val, void *desc);
t_stat com_show_aoutq (FILE *st, UNIT *uptr, int32 val, void *desc);
t_stat com_show_outq (FILE *st, UNIT *uptr, int32 val, void *desc);
void com_reset_ln (uint32 i);
uint16 com_gethd_free (LISTHD *lh);
uint16 com_gethd (LISTHD *lh);
t_bool com_new_puttl (LISTHD *lh, uint16 val);
void com_puttl (LISTHD *lh, uint16 ent);
t_bool com_inp_msg (uint32 ln, uint16 msg);
void com_skip_outc (uint32 ln);
t_stat com_test_atn (uint32 ch);
t_uint64 com_getob (uint32 ch);
t_bool com_qdone (uint32 ch);
void com_end (uint32 ch, uint32 fl, uint32 st);
t_stat com_send_id (uint32 ln);
t_stat com_send_ccmp (uint32 ln);
t_stat com_queue_in (uint32 ln, uint32 ch);
uint32 com_queue_out (uint32 ln, uint32 *c1);
void com_set_sns (t_uint64 stat);
/* COM data structures
com_dev COM device descriptor
com_unit COM unit descriptor
com_reg COM register list
com_mod COM modifiers list
*/
DIB com_dib = { &com_chsel, &com_chwr };
UNIT com_unit[] = {
{ UDATA (&comi_svc, UNIT_ATTABLE, 0), COM_INIT_POLL },
{ UDATA (&comti_svc, UNIT_DIS, 0), KBD_POLL_WAIT },
{ UDATA (&comc_svc, UNIT_DIS, 0), COMC_WAIT },
{ UDATA (&coms_svc, UNIT_DIS, 0), COMC_WAIT }
};
REG com_reg[] = {
{ FLDATA (ENABLE, com_enab, 0) },
{ ORDATA (STATE, com_sta, 6) },
{ ORDATA (MSGNUM, com_msgn, 12) },
{ ORDATA (SNS, com_sns, 60) },
{ ORDATA (CHOB, com_chob, 36) },
{ FLDATA (CHOBV, com_chob_v, 0) },
{ FLDATA (STOP, com_stop, 0) },
{ BRDATA (BUF, com_buf, 8, 36, COM_BUFSIZ) },
{ DRDATA (BPTR, com_bptr, 7), REG_RO },
{ DRDATA (BLIM, com_blim, 7), REG_RO },
{ BRDATA (NRET, com_not_ret, 10, 32, COM_TLINES), REG_RO + PV_LEFT },
{ BRDATA (FREEQ, &com_free, 10, 16, 2) },
{ BRDATA (INPQ, &com_inpq, 10, 16, 2) },
{ BRDATA (OUTQ, com_outq, 10, 16, 2 * COM_TLINES) },
{ BRDATA (PKTB, com_pkt, 10, 16, 2 * COM_PKTSIZ) },
{ DRDATA (TTIME, com_unit[COM_CIU].wait, 24), REG_NZ + PV_LEFT },
{ DRDATA (WTIME, com_unit[COM_CHU].wait, 24), REG_NZ + PV_LEFT },
{ DRDATA (CHAN, com_ch, 3), REG_HRO },
{ NULL }
};
MTAB com_mod[] = {
{ UNIT_ATT, UNIT_ATT, "connections", NULL, NULL, &com_summ },
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, 1, "CONNECTIONS", NULL,
NULL, &com_show, NULL },
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, 0, "STATISTICS", NULL,
NULL, &com_show, NULL },
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, COMR_FQ, "FREEQ", NULL,
NULL, &com_show_ctrl, 0 },
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, COMR_IQ, "INQ", NULL,
NULL, &com_show_ctrl, 0 },
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, COMR_OQ, "OUTQ", NULL,
NULL, &com_show_ctrl, 0 },
{ MTAB_XTD | MTAB_VDV | MTAB_NMO, -1, "ALL", NULL,
NULL, &com_show_ctrl, 0 },
{ MTAB_XTD | MTAB_VUN | MTAB_NMO, 0, "OUTQ", NULL,
NULL, &com_show_outq, 0 },
{ 0 }
};
DEVICE com_dev = {
"COM", com_unit, com_reg, com_mod,
3, 10, 31, 1, 16, 8,
&tmxr_ex, &tmxr_dep, &com_reset,
NULL, &com_attach, &com_detach,
&com_dib, DEV_NET | DEV_DIS
};
/* COMLL data structures
coml_dev COML device descriptor
coml_unit COML unit descriptor
coml_reg COML register list
coml_mod COML modifiers list
*/
UNIT coml_unit[] = {
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&como_svc, 0, 0), COML_WAIT },
{ UDATA (&comto_svc, 0, 0), COML_WAIT },
};
MTAB coml_mod[] = {
{ UNIT_K35+UNIT_2741, 0 , "KSR-37", "KSR-37", NULL },
{ UNIT_K35+UNIT_2741, UNIT_K35 , "KSR-35", "KSR-35", NULL },
// { UNIT_K35+UNIT_2741, UNIT_2741, "2741", "2741", NULL },
{ MTAB_XTD|MTAB_VUN, 0, NULL, "DISCONNECT",
&tmxr_dscln, NULL, &com_desc },
{ MTAB_XTD|MTAB_VUN|MTAB_NC, 0, "LOG", "LOG",
&tmxr_set_log, &tmxr_show_log, &com_desc },
{ MTAB_XTD|MTAB_VUN|MTAB_NC, 0, NULL, "NOLOG",
&tmxr_set_nolog, NULL, &com_desc },
{ 0 }
};
REG coml_reg[] = {
{ URDATA (TIME, coml_unit[0].wait, 10, 24, 0,
COM_TLINES, REG_NZ + PV_LEFT) },
{ NULL }
};
DEVICE coml_dev = {
"COML", coml_unit, coml_reg, coml_mod,
COM_TLINES, 10, 31, 1, 16, 8,
NULL, NULL, &com_reset,
NULL, NULL, NULL,
NULL, DEV_DIS
};
/* COM: channel select */
t_stat com_chsel (uint32 ch, uint32 sel, uint32 unit)
{
com_ch = ch; /* save channel */
if (sim_is_active (&com_unit[COM_CHU]) || /* not idle? */
sim_is_active (&com_unit[COM_SNS])) {
com_end (ch, CHINT_SEQC, 0); /* end, seq check */
return SCPE_OK;
}
switch (sel) { /* case on select */
case CHSL_RDS: /* read */
case CHSL_WRS: /* write */
com_sns = 0; /* clear status */
sim_activate (&com_unit[COM_CHU], com_unit[COM_CHU].wait);
break;
case CHSL_SNS: /* sense */
sim_activate (&com_unit[COM_SNS], com_unit[COM_SNS].wait);
break;
case CHSL_CTL: /* control */
default: /* other */
return STOP_ILLIOP;
}
com_stop = 0; /* clear stop */
com_sta = sel; /* set initial state */
return SCPE_OK;
}
/* Channel write, from 7909 channel program */
t_stat com_chwr (uint32 ch, t_uint64 val, uint32 stopf)
{
if (stopf) com_stop = 1;
else {
com_chob = val; /* store data */
com_chob_v = 1; /* set valid */
}
return SCPE_OK;
}
/* Unit service - SNS */
t_stat coms_svc (UNIT *uptr)
{
t_uint64 dat;
switch (com_sta) { /* case on state */
case CHSL_SNS: /* prepare data */
com_sns &= ~COMS_DYN; /* clear dynamic flags */
if (com_free.head) com_set_sns (COMS_INBF); /* free space? */
if (com_inpq.head) com_set_sns (COMS_DATR); /* pending input? */
com_buf[0] = (com_sns >> 24) & DMASK; /* buffer is 2 words */
com_buf[1] = (com_sns << 12) & DMASK;
com_bptr = 0;
com_blim = 2;
com_sta = CHSL_SNS|CHSL_2ND; /* 2nd state */
break;
case CHSL_SNS|CHSL_2ND: /* second state */
if (com_bptr >= com_blim) { /* end of buffer? */
ch9_set_end (com_ch, 0); /* set end */
ch_req |= REQ_CH (com_ch); /* request channel */
com_sta = CHSL_SNS|CHSL_3RD; /* 3rd state */
sim_activate (uptr, 10 * uptr->wait); /* longer wait */
return SCPE_OK;
}
dat = com_buf[com_bptr++]; /* get word */
if (!com_stop) ch9_req_rd (com_ch, dat); /* send wd to chan */
break;
case CHSL_SNS|CHSL_3RD: /* 3rd state */
if (com_qdone (com_ch)) return SCPE_OK; /* done? exit */
com_sta = CHSL_SNS; /* repeat sequence */
break;
}
sim_activate (uptr, uptr->wait); /* sched next */
return SCPE_OK;
}
/* Unit service - channel program */
t_stat comc_svc (UNIT *uptr)
{
uint32 i, j, k, ccnt, ln, uln, ent;
uint16 chr;
t_uint64 dat;
switch (com_sta) { /* case on state */
case CHSL_RDS: /* read start */
for (i = 0; i < COM_BUFSIZ; i++) com_buf[i] = 0; /* clear chan buf */
com_buf[0] = com_msgn; /* 1st char is msg num */
com_msgn = (com_msgn + 1) & 03777; /* incr msg num */
for (i = 1, j = 0; i < COMI_12BMAX; i++) { /* fill buffer */
ent = com_gethd_free (&com_inpq); /* get next entry */
if (ent == 0) break; /* q empty, done */
if ((i % 3) == 0) j++; /* next word? */
com_buf[j] = (com_buf[j] << 12) | /* pack data */
((t_uint64) (com_pkt[ent].data & 07777));
}
for (k = i % 3; k < 3; k++) { /* fill with EOM */
if (k == 0) j++; /* next word? */
com_buf[j] = (com_buf[j] << 12) | COMI_EOM;
}
com_bptr = 0; /* init buf ptr */
com_blim = j + 1; /* save buf size */
com_sta = CHSL_RDS|CHSL_2ND; /* next state */
break;
case CHSL_RDS|CHSL_2ND: /* read xmit word */
if (com_bptr >= com_blim) /* transfer done? */
com_end (com_ch, 0, CHSL_RDS|CHSL_3RD); /* end, next state */
else { /* more to do */
dat = com_buf[com_bptr++]; /* get word */
if (!com_stop) ch9_req_rd (com_ch, dat); /* give to channel */
}
break;
case CHSL_RDS|CHSL_3RD: /* read end */
if (com_qdone (com_ch)) /* done? */
return com_test_atn (com_ch); /* test atn, exit */
com_sta = CHSL_RDS; /* repeat sequence */
break;
case CHSL_WRS: /* write start */
for (i = 0; i < COM_BUFSIZ; i++) com_buf[i] = 0; /* clear chan buf */
com_bptr = 0; /* init buf ptr */
com_sta = CHSL_WRS|CHSL_2ND; /* next state */
ch_req |= REQ_CH (com_ch); /* request channel */
com_chob = 0; /* clr, inval buf */
com_chob_v = 0;
break;
case CHSL_WRS|CHSL_2ND: /* write first word */
dat = com_getob (com_ch); /* get word? */
if (dat == 0777777777777) { /* turn on? */
com_enab = 1; /* enable 7750 */
com_msgn = 0; /* init message # */
com_end (com_ch, 0, CHSL_WRS|CHSL_4TH); /* end, last state */
}
else if (dat & COMO_LINCTL) { /* control message? */
ln = COMO_GETLN (dat); /* line number */
if (ln >= (COM_TLINES + COM_LBASE)) /* invalid line? */
return STOP_INVLIN;
if (dat & COMO_CTLRST) return STOP_INVMSG; /* char must be 0 */
if (ln >= COM_LBASE) com_reset_ln (ln - COM_LBASE);
com_end (com_ch, 0, CHSL_WRS|CHSL_4TH); /* end, last state */
}
else { /* data message */
ccnt = (((uint32) dat >> 12) & 07777) + 1; /* char count plus EOM */
if (dat & COMO_LIN12B) ccnt = ccnt << 1; /* 12b? double */
com_blim = (ccnt + 6 + 5) / 6; /* buffer limit */
if ((com_blim == 1) || (com_blim >= COMO_BMAX))
return STOP_INVMSG;
com_buf[com_bptr++] = dat; /* store word */
com_sta = CHSL_WRS|CHSL_3RD; /* next state */
ch_req |= REQ_CH (com_ch); /* request channel */
}
break;
case CHSL_WRS|CHSL_3RD: /* other words */
dat = com_getob (com_ch); /* get word */
com_buf[com_bptr++] = dat; /* store word */
if (com_bptr >= com_blim) { /* transfer done? */
ln = COMO_GETLN (com_buf[0]); /* line number */
if (ln >= (COM_TLINES + COM_LBASE)) /* invalid line? */
return STOP_INVLIN;
if ((com_buf[0] & COMO_LIN12B) && /* 12b message? */
(ln >= COM_LBASE)) {
uln = ln - COM_LBASE; /* unit number */
for (i = 2, j = 0; i < COMO_12BMAX; i++) { /* unpack 12b char */
if ((i % 3) == 0) j++;
chr = (uint16) (com_buf[j] >> ((2 - (i % 3)) * 12)) & 07777;
if (chr == COMO_EOM12B) break; /* EOM? */
if (!com_new_puttl (&com_outq[uln], chr))
return STOP_NOOFREE; /* append to outq */
}
sim_activate (&coml_unit[uln], coml_unit[uln].wait);
}
com_end (com_ch, 0, CHSL_WRS|CHSL_4TH); /* end, last state */
}
else if (!com_stop) ch_req |= REQ_CH (com_ch); /* request channel */
break;
case CHSL_WRS|CHSL_4TH: /* buffer done */
if (com_qdone (com_ch)) /* done? */
return com_test_atn (com_ch); /* test atn, exit */
com_sta = CHSL_WRS; /* repeat sequence */
break;
default:
return SCPE_IERR;
}
sim_activate (uptr, uptr->wait);
return SCPE_OK;
}
/* Unit service - console receive - always running, even if device is not */
t_stat comti_svc (UNIT *uptr)
{
int32 c;
t_stat r;
sim_activate (uptr, uptr->wait); /* continue poll */
c = sim_poll_kbd (); /* get character */
if (c && !(c & (SCPE_BREAK|SCPE_KFLAG))) return c; /* error? */
if (!com_enab || (c & SCPE_BREAK)) return SCPE_OK; /* !enab, break? done */
if (coml_unit[COM_MLINES].NEEDID) /* ID needed? */
return com_send_id (COM_MLINES);
if ((c & SCPE_KFLAG) && ((c = c & 0177) != 0)) { /* char input? */
if (r = com_queue_in (COM_MLINES, c)) return r;
if (sim_tt_outcvt (c, TT_MODE_7P) >= 0) sim_putchar (c);
if (c == '\r') sim_putchar ('\n');
}
return com_test_atn (com_ch); /* set ATN if input */
}
/* Unit service - receive side
Poll all active lines for input
Poll for new connections */
t_stat comi_svc (UNIT *uptr)
{
int32 c, ln, t;
t_stat r;
if ((uptr->flags & UNIT_ATT) == 0) return SCPE_OK; /* attached? */
t = sim_rtcn_calb (com_tps, TMR_COM); /* calibrate */
sim_activate (uptr, t); /* continue poll */
if (!com_enab) return SCPE_OK; /* not enabled? exit */
ln = tmxr_poll_conn (&com_desc); /* look for connect */
if (ln >= 0) { /* got one? */
com_ldsc[ln].rcve = 1; /* rcv enabled */
coml_unit[ln].CONN = 1; /* flag connected */
coml_unit[ln].NEEDID = 1; /* need ID */
}
tmxr_poll_rx (&com_desc); /* poll for input */
for (ln = 0; ln < COM_MLINES; ln++) { /* loop thru mux */
if (com_ldsc[ln].conn) { /* connected? */
if (coml_unit[ln].NEEDID) return com_send_id (ln);
c = tmxr_getc_ln (&com_ldsc[ln]); /* get char */
if (c) { /* any char? */
c = c & 0177; /* mask to 7b */
if (r = com_queue_in (ln, c)) return r; /* queue char, err? */
if (com_ldsc[ln].xmte) { /* output enabled? */
if (sim_tt_outcvt (c, TT_MODE_7P) >= 0) /* echo char */
tmxr_putc_ln (&com_ldsc[ln], c);
if (c == '\r') /* add LF after CR */
tmxr_putc_ln (&com_ldsc[ln], '\n');
tmxr_poll_tx (&com_desc); /* poll xmt */
} /* end if enabled */
} /* end if char */
} /* end if conn */
else if (coml_unit[ln].CONN) { /* not conn, was conn? */
coml_unit[ln].CONN = 0; /* clear connected */
coml_unit[ln].NEEDID = 0; /* clear need id */
if (!com_inp_msg (ln, COMI_HANGUP)) /* hangup message */
return STOP_NOIFREE;
}
} /* end for */
return com_test_atn (com_ch); /* set ATN if input */
}
/* Unit service - console transmit */
t_stat comto_svc (UNIT *uptr)
{
uint32 c, c1;
if (com_outq[COM_MLINES].head == 0) /* no more characters? */
return com_send_ccmp (COM_MLINES); /* free any remaining */
c = com_queue_out (COM_MLINES, &c1); /* get character, cvt */
if (c) sim_putchar (c); /* printable? output */
if (c1) sim_putchar (c1); /* second char? output */
sim_activate (uptr, uptr->wait); /* next char */
if (com_not_ret[COM_MLINES] >= COMI_CMAX) /* completion needed? */
return com_send_ccmp (COM_MLINES); /* generate msg */
return SCPE_OK;
}
/* Unit service - transmit side */
t_stat como_svc (UNIT *uptr)
{
uint32 c, c1;
int32 ln = uptr - coml_unit; /* line # */
if (com_outq[ln].head == 0) /* no more characters? */
return com_send_ccmp (ln); /* free any remaining */
if (com_ldsc[ln].conn) { /* connected? */
if (com_ldsc[ln].xmte) { /* output enabled? */
c = com_queue_out (ln, &c1); /* get character, cvt */
if (c) tmxr_putc_ln (&com_ldsc[ln], c); /* printable? output */
if (c1) tmxr_putc_ln (&com_ldsc[ln], c1); /* print second */
} /* end if */
tmxr_poll_tx (&com_desc); /* poll xmt */
sim_activate (uptr, uptr->wait); /* next char */
if (com_not_ret[ln] >= COMI_CMAX) /* completion needed? */
return com_send_ccmp (ln); /* generate msg */
} /* end if conn */
return SCPE_OK;
}
/* Send ID sequence on input */
t_stat com_send_id (uint32 ln)
{
com_inp_msg (ln, COMI_DIALUP); /* input message: */
if (coml_unit[ln].flags & UNIT_K35) /* dialup, ID, endID */
com_inp_msg (ln, COMI_K35);
else com_inp_msg (ln, COMI_K37);
com_inp_msg (ln, 0);
com_inp_msg (ln, 0);
com_inp_msg (ln, 0);
com_inp_msg (ln, 0);
com_inp_msg (ln, (uint16) (ln + COM_LBASE));
if (!com_inp_msg (ln, COMI_ENDID)) /* make sure there */
return STOP_NOIFREE; /* was room for msg */
coml_unit[ln].NEEDID = 0;
return SCPE_OK;
}
/* Translate and queue input character */
t_stat com_queue_in (uint32 ln, uint32 c)
{
uint16 out;
if (c == com_intr) out = COMI_INTR;
else if (c == com_quit) out = COMI_QUIT;
else {
if (coml_unit[ln].flags & UNIT_K35) { /* KSR-35? */
if (islower (c)) c = toupper (c); /* convert LC to UC */
}
else c |= (com_epar[c]? COMI_PARITY: 0); /* add even parity */
out = (~c) & 0377; /* 1's complement */
}
if (!com_inp_msg (ln, out)) return STOP_NOIFREE; /* input message */
return SCPE_OK;
}
/* Retrieve and translate output character */
uint32 com_queue_out (uint32 ln, uint32 *c1)
{
uint32 c, ent, raw;
*c1 = 0; /* assume non-printing */
ent = com_gethd_free (&com_outq[ln]); /* get character */
if (ent == 0) return 0; /* nothing? */
raw = com_pkt[ent].data; /* get 12b character */
com_not_ret[ln]++;
if (raw == COMO_BITRPT) { /* insert delay? */
com_skip_outc (ln);
return 0;
}
c = (~raw >> 1) & 0177; /* remove start, parity */
if (c >= 040) { /* printable? */
if (c == 0177) return 0; /* DEL? ignore */
if ((coml_unit[ln].flags & UNIT_K35) && islower (c)) /* KSR-35 LC? */
c = toupper (c); /* cvt to UC */
return c;
}
switch (c) {
case '\t': case '\f': case '\b': case '\a': /* valid ctrls */
return c;
case '\r': /* carriage return? */
if (coml_unit[ln].flags & UNIT_K35) /* KSR-35? */
*c1 = '\n'; /* lf after cr */
return c;
case '\n': /* line feed? */
if (!(coml_unit[ln].flags & UNIT_K35)) { /* KSR-37? */
*c1 = '\n'; /* lf after cr */
return '\r';
}
return c; /* print lf */
case 022: /* DC2 */
if (!(com_unit[ln].flags & UNIT_K35)) { /* KSR-37? */
com_skip_outc (ln); /* skip next */
return '\n'; /* print lf */
}
break;
case 023: /* DC3 */
if (!(com_unit[ln].flags & UNIT_K35)) /* KSR-37? */
com_skip_outc (ln); /* skip next */
break;
}
return 0; /* ignore others */
}
/* Generate completion message, if needed */
t_stat com_send_ccmp (uint32 ln)
{
uint32 t;
if (t = com_not_ret[ln]) { /* chars not returned? */
if (t > COMI_CMAX) t = COMI_CMAX; /* limit to max */
com_not_ret[ln] -= t; /* keep count */
if (!com_inp_msg (ln, COMI_COMP (t))) /* gen completion msg */
return STOP_NOIFREE;
}
return SCPE_OK;
}
/* Skip next char in output queue */
void com_skip_outc (uint32 ln)
{
if (com_gethd_free (&com_outq[ln])) com_not_ret[ln]++; /* count it */
return;
}
/* Read and validate output buffer */
t_uint64 com_getob (uint32 ch)
{
if (com_chob_v) com_chob_v = 0; /* valid? clear */
else if (!com_stop) { /* not stopped? */
ch9_set_ioc (com_ch); /* IO check */
com_set_sns (COMS_ITMO); /* set sense bit */
}
return com_chob;
}
/* Set attention if input pending */
t_stat com_test_atn (uint32 ch)
{
if (com_inpq.head) ch9_set_atn (ch);
return SCPE_OK;
}
/* Test for done */
t_bool com_qdone (uint32 ch)
{
if (com_stop || !ch9_qconn (ch)) { /* stop or err disc? */
com_sta = 0; /* ctrl is idle */
return TRUE;
}
return FALSE;
}
/* Channel end */
void com_end (uint32 ch, uint32 fl, uint32 st)
{
ch9_set_end (ch, fl); /* set end */
ch_req |= REQ_CH (ch);
com_sta = st; /* next state */
return;
}
/* List routines - remove from head and free */
uint16 com_gethd_free (LISTHD *lh)
{
uint16 ent;
if ((ent = com_gethd (lh)) != 0)
com_puttl (&com_free, ent);
return ent;
}
/* Get free entry and insert at tail */
t_bool com_new_puttl (LISTHD *lh, uint16 val)
{
uint16 ent;
if ((ent = com_gethd (&com_free)) != 0) {
com_pkt[ent].data = val;
com_puttl (lh, ent);
return TRUE;
}
return FALSE;
}
/* Remove from head */
uint16 com_gethd (LISTHD *lh)
{
uint16 ent;
if ((ent = lh->head) != 0) {
lh->head = com_pkt[ent].next;
if (lh->head == 0) lh->tail = 0;
}
else lh->tail = 0;
return ent;
}
/* Insert at tail */
void com_puttl (LISTHD *lh, uint16 ent)
{
if (lh->tail == 0) lh->head = ent;
else com_pkt[lh->tail].next = ent;
com_pkt[ent].next = 0;
lh->tail = ent;
return;
}
/* Insert line and message into input queue */
t_bool com_inp_msg (uint32 ln, uint16 msg)
{
uint16 ent1, ent2;
if ((ent1 = com_gethd (&com_free)) != 0) { /* pkt avail? */
if ((ent2 = com_gethd (&com_free)) != 0) { /* 2nd pkt avail? */
com_pkt[ent1].data = (ln + COM_LBASE) | COMI_VALIDL; /* 1st pkt = line# */
com_pkt[ent2].data = msg; /* 2nd pkt = char */
com_puttl (&com_inpq, ent1); /* queue pkts */
com_puttl (&com_inpq, ent2);
return TRUE;
}
com_puttl (&com_free, ent1); /* free 1st */
}
return FALSE; /* failed */
}
/* Set flag in sense */
void com_set_sns (t_uint64 stat)
{
com_sns |= stat;
com_sns &= ~(COMS_PCHK|COMS_DCHK|COMS_EXCC);
if (com_sns & COMS_PALL) com_sns |= COMS_PCHK;
if (com_sns & COMS_DALL) com_sns |= COMS_DCHK;
if (com_sns & COMS_EALL) com_sns |= COMS_EXCC;
return;
}
/* Reset routine */
t_stat com_reset (DEVICE *dptr)
{
uint32 i;
if (dptr->flags & DEV_DIS) { /* disabled? */
com_dev.flags = com_dev.flags | DEV_DIS; /* disable lines */
coml_dev.flags = coml_dev.flags | DEV_DIS;
}
else {
com_dev.flags = com_dev.flags & ~DEV_DIS; /* enable lines */
coml_dev.flags = coml_dev.flags & ~DEV_DIS;
}
sim_activate (&com_unit[COM_CIU], com_unit[COM_CIU].wait); /* console */
sim_cancel (&com_unit[COM_PLU]);
sim_cancel (&com_unit[COM_CHU]);
if (com_unit[COM_PLU].flags & UNIT_ATT) { /* master att? */
int32 t = sim_rtcn_init (com_unit[COM_PLU].wait, TMR_COM);
sim_activate (&com_unit[COM_PLU], t);
}
com_enab = 0;
com_sns = 0;
com_msgn = 0;
com_sta = 0;
com_chob = 0;
com_chob_v = 0;
com_stop = 0;
com_bptr = 0;
com_blim = 0;
for (i = 0; i < COM_BUFSIZ; i++) com_buf[i] = 0;
com_inpq.head = 0; /* init queues */
com_inpq.tail = 0;
for (i = 0; i < COM_TLINES; i++) {
com_outq[i].head = 0;
com_outq[i].tail = 0;
com_reset_ln (i);
}
com_pkt[0].next = 0; /* init free list */
for (i = 1; i < COM_PKTSIZ; i++) {
com_pkt[i].next = i + 1;
com_pkt[i].data = 0;
}
com_pkt[COM_PKTSIZ - 1].next = 0; /* end of free list */
com_free.head = 1;
com_free.tail = COM_PKTSIZ - 1;
coml_unit[COM_MLINES].CONN = 1; /* console always conn */
coml_unit[COM_MLINES].NEEDID = 1;
return SCPE_OK;
}
/* Attach master unit */
t_stat com_attach (UNIT *uptr, char *cptr)
{
t_stat r;
r = tmxr_attach (&com_desc, uptr, cptr); /* attach */
if (r != SCPE_OK) return r; /* error */
sim_rtcn_init (uptr->wait, TMR_COM);
sim_activate (uptr, 100); /* quick poll */
return SCPE_OK;
}
/* Detach master unit */
t_stat com_detach (UNIT *uptr)
{
uint32 i;
t_stat r;
r = tmxr_detach (&com_desc, uptr); /* detach */
for (i = 0; i < COM_MLINES; i++) com_ldsc[i].rcve = 0; /* disable rcv */
sim_cancel (uptr); /* stop poll */
return r;
}
/* Show summary processor */
t_stat com_summ (FILE *st, UNIT *uptr, int32 val, void *desc)
{
uint32 i, t;
for (i = t = 0; i < COM_MLINES; i++) t = t + (com_ldsc[i].conn != 0);
if (t == 1) fprintf (st, "1 connection");
else fprintf (st, "%d connections", t);
return SCPE_OK;
}
/* SHOW CONN/STAT processor */
t_stat com_show (FILE *st, UNIT *uptr, int32 val, void *desc)
{
uint32 i, t;
for (i = t = 0; i < COM_MLINES; i++) t = t + (com_ldsc[i].conn != 0);
if (t) {
for (i = 0; i < COM_MLINES; i++) {
if (com_ldsc[i].conn) {
if (val) tmxr_fconns (st, &com_ldsc[i], i);
else tmxr_fstats (st, &com_ldsc[i], i);
}
}
}
else fprintf (st, "all disconnected\n");
return SCPE_OK;
}
/* Reset an individual line */
void com_reset_ln (uint32 ln)
{
while (com_gethd_free (&com_outq[ln])) ;
com_not_ret[ln] = 0;
sim_cancel (&coml_unit[ln]);
if ((ln < COM_MLINES) && (com_ldsc[ln].conn == 0)) coml_unit[ln].CONN = 0;
return;
}
/* Special show commands */
uint32 com_show_qsumm (FILE *st, LISTHD *lh, char *name)
{
uint32 i, next;
next = lh->head;
for (i = 0; i < COM_PKTSIZ; i++) {
if (next == 0) {
if (i == 0) fprintf (st, "%s is empty\n", name);
else if (i == 1) fprintf (st, "%s has 1 entry\n", name);
else fprintf (st, "%s had %d entries\n", name, i);
return i;
}
next = com_pkt[next].next;
}
fprintf (st, "%s is corrupt\n", name);
return 0;
}
void com_show_char (FILE *st, uint32 ch)
{
uint32 c;
fprintf (st, "%03o", ch);
c = (~ch) & 0177;
if (((ch & 07400) == 0) && (c >= 040) && (c != 0177)) fprintf (st, "[%c]", c);
return;
}
t_stat com_show_freeq (FILE *st, UNIT *uptr, int32 val, void *desc)
{
com_show_qsumm (st, &com_free, "Free queue");
return SCPE_OK;
}
t_stat com_show_inq (FILE *st, UNIT *uptr, int32 val, void *desc)
{
uint32 entc, ln, i, next;
if (entc = com_show_qsumm (st, &com_inpq, "Input queue")) {
for (i = 0, next = com_inpq.head; next != 0;
i++, next = com_pkt[next].next) {
if ((i % 4) == 0) fprintf (st, "%d:\t", i);
ln = com_pkt[next].data;
next = com_pkt[next].next;
if (next == 0) {
fprintf (st, "Line number without data\n");
return SCPE_OK;
}
fprintf (st, "%d/", ln);
com_show_char (st, com_pkt[next].data);
fputc ((((i % 4) == 3)? '\n': '\t'), st);
}
if (i % 4) fputc ('\n', st);
}
return SCPE_OK;
}
t_stat com_show_outq (FILE *st, UNIT *uptr, int32 val, void *desc)
{
uint32 entc, ln, i, next;
char name[20];
ln = uptr - com_dev.units;
sprintf (name, "Output queue %d", ln);
if (entc = com_show_qsumm (st, &com_outq[ln], name)) {
for (i = 0, next = com_outq[ln].head; next != 0;
i++, next = com_pkt[next].next) {
if ((i % 8) == 0) fprintf (st, "%d:\t", i);
com_show_char (st, com_pkt[next].data >> 1);
fputc ((((i % 8) == 7)? '\n': '\t'), st);
}
if (i % 8) fputc ('\n', st);
}
return SCPE_OK;
}
t_stat com_show_aoutq (FILE *st, UNIT *uptr, int32 val, void *desc)
{
uint32 i;
for (i = 0; i < COM_TLINES; i++)
com_show_outq (st, com_dev.units + i, 1, desc);
return SCPE_OK;
}
t_stat com_show_ctrl (FILE *st, UNIT *uptr, int32 val, void *desc)
{
if (!com_enab) fprintf (st, "Controller is not initialized\n");
if (val & COMR_FQ) com_show_freeq (st, uptr, 1, desc);
if (val & COMR_IQ) com_show_inq (st, uptr, 1, desc);
if (val & COMR_OQ) com_show_aoutq (st, uptr, 1, desc);
return SCPE_OK;
}