| /* hp2100_lpt.c: HP 2100 12845B line printer simulator | |
| Copyright (c) 1993-2006, Robert M. Supnik | |
| Permission is hereby granted, free of charge, to any person obtaining a | |
| copy of this software and associated documentation files (the "Software"), | |
| to deal in the Software without restriction, including without limitation | |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| and/or sell copies of the Software, and to permit persons to whom the | |
| Software is furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be included in | |
| all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| Except as contained in this notice, the name of Robert M Supnik shall not be | |
| used in advertising or otherwise to promote the sale, use or other dealings | |
| in this Software without prior written authorization from Robert M Supnik. | |
| lpt 12845B 2607 line printer | |
| 28-Dec-06 JDB Added ioCRS state to I/O decoders (action unverified) | |
| 19-Nov-04 JDB Added restart when set online, etc. | |
| 29-Sep-04 JDB Added SET OFFLINE/ONLINE, POWEROFF/POWERON | |
| Fixed status returns for error conditions | |
| Fixed TOF handling so form remains on line 0 | |
| 03-Jun-04 RMS Fixed timing (found by Dave Bryan) | |
| 26-Apr-04 RMS Fixed SFS x,C and SFC x,C | |
| Implemented DMA SRQ (follows FLG) | |
| 25-Apr-03 RMS Revised for extended file support | |
| 24-Oct-02 RMS Cloned from 12653A | |
| The 2607 provides three status bits via the interface: | |
| bit 15 -- printer ready (online) | |
| bit 14 -- paper out | |
| bit 0 -- printer idle | |
| The expected status returns are: | |
| 140001 -- power off or cable disconnected | |
| 100001 -- power on, paper loaded, printer ready | |
| 100000 -- power on, paper loaded, printer busy | |
| 040000 -- power on, paper out (at bottom-of-form) | |
| 000000 -- power on, paper out (not at BOF) / print button up / platen open | |
| Manual Note: "2-33. PAPER OUT SIGNAL. [...] The signal is asserted only | |
| when the format tape in the line printer has reached the bottom of form." | |
| These simulator commands provide the listed printer states: | |
| SET LPT POWEROFF --> power off or cable disconnected | |
| SET LPT POWERON --> power on | |
| SET LPT OFFLINE --> print button up | |
| SET LPT ONLINE --> print button down | |
| ATT LPT <file> --> paper loaded | |
| DET LPT --> paper out | |
| Reference: | |
| - 12845A Line Printer Operating and Service Manual (12845-90001, Aug-1972) | |
| */ | |
| #include "hp2100_defs.h" | |
| #define LPT_PAGELNT 60 /* page length */ | |
| #define LPT_NBSY 0000001 /* not busy */ | |
| #define LPT_PAPO 0040000 /* paper out */ | |
| #define LPT_RDY 0100000 /* ready */ | |
| #define LPT_PWROFF LPT_RDY | LPT_PAPO | LPT_NBSY /* power-off status */ | |
| #define LPT_CTL 0100000 /* control output */ | |
| #define LPT_CHAN 0000100 /* skip to chan */ | |
| #define LPT_SKIPM 0000077 /* line count mask */ | |
| #define LPT_CHANM 0000007 /* channel mask */ | |
| #define UNIT_V_POWEROFF (UNIT_V_UF + 0) /* unit powered off */ | |
| #define UNIT_V_OFFLINE (UNIT_V_UF + 1) /* unit offline */ | |
| #define UNIT_POWEROFF (1 << UNIT_V_POWEROFF) | |
| #define UNIT_OFFLINE (1 << UNIT_V_OFFLINE) | |
| extern uint32 PC; | |
| extern uint32 dev_cmd[2], dev_ctl[2], dev_flg[2], dev_fbf[2], dev_srq[2]; | |
| int32 lpt_ctime = 4; /* char time */ | |
| int32 lpt_ptime = 10000; /* print time */ | |
| int32 lpt_stopioe = 0; /* stop on error */ | |
| int32 lpt_lcnt = 0; /* line count */ | |
| static int32 lpt_cct[8] = { | |
| 1, 1, 1, 2, 3, LPT_PAGELNT/2, LPT_PAGELNT/4, LPT_PAGELNT/6 | |
| }; | |
| DEVICE lpt_dev; | |
| int32 lptio (int32 inst, int32 IR, int32 dat); | |
| t_stat lpt_svc (UNIT *uptr); | |
| t_stat lpt_reset (DEVICE *dptr); | |
| t_stat lpt_restart (UNIT *uptr, int32 value, char *cptr, void *desc); | |
| t_stat lpt_attach (UNIT *uptr, char *cptr); | |
| /* LPT data structures | |
| lpt_dev LPT device descriptor | |
| lpt_unit LPT unit descriptor | |
| lpt_reg LPT register list | |
| */ | |
| DIB lpt_dib = { LPT, 0, 0, 0, 0, 0, &lptio }; | |
| UNIT lpt_unit = { | |
| UDATA (&lpt_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_DISABLE, 0) | |
| }; | |
| REG lpt_reg[] = { | |
| { ORDATA (BUF, lpt_unit.buf, 7) }, | |
| { FLDATA (CMD, lpt_dib.cmd, 0) }, | |
| { FLDATA (CTL, lpt_dib.ctl, 0) }, | |
| { FLDATA (FLG, lpt_dib.flg, 0) }, | |
| { FLDATA (FBF, lpt_dib.fbf, 0) }, | |
| { FLDATA (SRQ, lpt_dib.srq, 0) }, | |
| { DRDATA (LCNT, lpt_lcnt, 7) }, | |
| { DRDATA (POS, lpt_unit.pos, T_ADDR_W), PV_LEFT }, | |
| { DRDATA (CTIME, lpt_ctime, 31), PV_LEFT }, | |
| { DRDATA (PTIME, lpt_ptime, 24), PV_LEFT }, | |
| { FLDATA (STOP_IOE, lpt_stopioe, 0) }, | |
| { ORDATA (DEVNO, lpt_dib.devno, 6), REG_HRO }, | |
| { NULL } | |
| }; | |
| MTAB lpt_mod[] = { | |
| { UNIT_POWEROFF, UNIT_POWEROFF, "power off", "POWEROFF", NULL }, | |
| { UNIT_POWEROFF, 0, "power on", "POWERON", lpt_restart }, | |
| { UNIT_OFFLINE, UNIT_OFFLINE, "offline", "OFFLINE", NULL }, | |
| { UNIT_OFFLINE, 0, "online", "ONLINE", lpt_restart }, | |
| { MTAB_XTD | MTAB_VDV, 0, "DEVNO", "DEVNO", | |
| &hp_setdev, &hp_showdev, &lpt_dev }, | |
| { 0 } | |
| }; | |
| DEVICE lpt_dev = { | |
| "LPT", &lpt_unit, lpt_reg, lpt_mod, | |
| 1, 10, 31, 1, 8, 8, | |
| NULL, NULL, &lpt_reset, | |
| NULL, &lpt_attach, NULL, | |
| &lpt_dib, DEV_DISABLE | |
| }; | |
| /* IO instructions */ | |
| int32 lptio (int32 inst, int32 IR, int32 dat) | |
| { | |
| int32 dev; | |
| dev = IR & I_DEVMASK; /* get device no */ | |
| switch (inst) { /* case on opcode */ | |
| case ioFLG: /* flag clear/set */ | |
| if ((IR & I_HC) == 0) { setFSR (dev); } /* STF */ | |
| break; | |
| case ioSFC: /* skip flag clear */ | |
| if (FLG (dev) == 0) PC = (PC + 1) & VAMASK; | |
| break; | |
| case ioSFS: /* skip flag set */ | |
| if (FLG (dev) != 0) PC = (PC + 1) & VAMASK; | |
| break; | |
| case ioOTX: /* output */ | |
| lpt_unit.buf = dat & (LPT_CTL | 0177); | |
| break; | |
| case ioLIX: /* load */ | |
| dat = 0; /* default sta = 0 */ | |
| case ioMIX: /* merge */ | |
| if (lpt_unit.flags & UNIT_POWEROFF) /* power off? */ | |
| dat = dat | LPT_PWROFF; | |
| else if (!(lpt_unit.flags & UNIT_OFFLINE)) { /* online? */ | |
| if (lpt_unit.flags & UNIT_ATT) { /* paper loaded? */ | |
| dat = dat | LPT_RDY; | |
| if (!sim_is_active (&lpt_unit)) /* printer busy? */ | |
| dat = dat | LPT_NBSY; | |
| } | |
| else if (lpt_lcnt == LPT_PAGELNT - 1) /* paper out, at BOF? */ | |
| dat = dat | LPT_PAPO; | |
| } | |
| break; | |
| case ioCRS: /* control reset (action unverif) */ | |
| case ioCTL: /* control clear/set */ | |
| if (IR & I_CTL) { /* CLC */ | |
| clrCMD (dev); /* clear ctl, cmd */ | |
| clrCTL (dev); | |
| } | |
| else { /* STC */ | |
| setCMD (dev); /* set ctl, cmd */ | |
| setCTL (dev); | |
| sim_activate (&lpt_unit, /* schedule op */ | |
| (lpt_unit.buf & LPT_CTL)? lpt_ptime: lpt_ctime); | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| if (IR & I_HC) { clrFSR (dev); } /* H/C option */ | |
| return dat; | |
| } | |
| /* Unit service */ | |
| t_stat lpt_svc (UNIT *uptr) | |
| { | |
| int32 i, skip, chan, dev; | |
| dev = lpt_dib.devno; /* get dev no */ | |
| if ((uptr->flags & UNIT_ATT) == 0) /* attached? */ | |
| return IORETURN (lpt_stopioe, SCPE_UNATT); | |
| else if (uptr->flags & UNIT_OFFLINE) /* offline? */ | |
| return IORETURN (lpt_stopioe, STOP_OFFLINE); | |
| else if (uptr->flags & UNIT_POWEROFF) /* powered off? */ | |
| return IORETURN (lpt_stopioe, STOP_PWROFF); | |
| clrCMD (dev); /* clear cmd */ | |
| setFSR (dev); /* set flag, fbf */ | |
| if (uptr->buf & LPT_CTL) { /* control word? */ | |
| if (uptr->buf & LPT_CHAN) { | |
| chan = uptr->buf & LPT_CHANM; | |
| if (chan == 0) { /* top of form? */ | |
| fputc ('\f', uptr->fileref); /* ffeed */ | |
| lpt_lcnt = 0; /* reset line cnt */ | |
| skip = 0; | |
| } | |
| else if (chan == 1) skip = LPT_PAGELNT - lpt_lcnt - 1; | |
| else skip = lpt_cct[chan] - (lpt_lcnt % lpt_cct[chan]); | |
| } | |
| else { | |
| skip = uptr->buf & LPT_SKIPM; | |
| if (skip == 0) fputc ('\r', uptr->fileref); | |
| } | |
| for (i = 0; i < skip; i++) fputc ('\n', uptr->fileref); | |
| lpt_lcnt = (lpt_lcnt + skip) % LPT_PAGELNT; | |
| } | |
| else fputc (uptr->buf & 0177, uptr->fileref); /* no, just add char */ | |
| if (ferror (uptr->fileref)) { | |
| perror ("LPT I/O error"); | |
| clearerr (uptr->fileref); | |
| return SCPE_IOERR; | |
| } | |
| lpt_unit.pos = ftell (uptr->fileref); /* update pos */ | |
| return SCPE_OK; | |
| } | |
| /* Reset routine - called from SCP, flags in DIB */ | |
| t_stat lpt_reset (DEVICE *dptr) | |
| { | |
| lpt_dib.cmd = lpt_dib.ctl = 0; /* clear cmd, ctl */ | |
| lpt_dib.flg = lpt_dib.fbf = lpt_dib.srq = 1; /* set flg, fbf, srq */ | |
| lpt_unit.buf = 0; | |
| sim_cancel (&lpt_unit); /* deactivate unit */ | |
| return SCPE_OK; | |
| } | |
| /* Restart I/O routine | |
| If I/O is started via STC, and the printer is powered off, offline, | |
| or out of paper, the CTL and CMD flip-flops will set, a service event | |
| will be scheduled, and the service routine will be entered. If | |
| STOP_IOE is not set, the I/O operation will "hang" at that point | |
| until the printer is powered on, set online, or paper is supplied | |
| (attached). | |
| If a pending operation is "hung" when this routine is called, it is | |
| restarted, which clears CTL and sets FBF and FLG, completing the | |
| original I/O request. | |
| */ | |
| t_stat lpt_restart (UNIT *uptr, int32 value, char *cptr, void *desc) | |
| { | |
| if (lpt_dib.cmd && lpt_dib.ctl && !sim_is_active (uptr)) | |
| sim_activate (uptr, 0); /* reschedule I/O */ | |
| return SCPE_OK; | |
| } | |
| /* Attach routine */ | |
| t_stat lpt_attach (UNIT *uptr, char *cptr) | |
| { | |
| lpt_lcnt = 0; /* top of form */ | |
| lpt_restart (uptr, 0, NULL, NULL); /* restart I/O if hung */ | |
| return attach_unit (uptr, cptr); | |
| } |