| Bugs Found | |
| ---------- | |
| 1. pushj cleared T2 after setting it | |
| 2. if timer autoadjust is enabled, timer diagnostic may fail, | |
| depending on host CPU speed | |
| 3. DFAD/DFSB should use FP_ONES instead of ONES | |
| 4. TLB physical address max = 1MW, tested in diagnostic | |
| 5. DPB does read/write, not read-modify/write | |
| 6. Fetch error takes priority over traps, due to prefetching | |
| of next instruction | |
| 7. HSB is 36b, was 32b | |
| 8. CPU and PAG devices had mismatched types | |
| 9. non-zero sections in Tops-20 paging section indirect may | |
| cause non-existent memory error, due to microcode "error" | |
| 10. PXCT test for user mode was backward | |
| 11. Timer interrupts were not implemented in Tops-20 indirect | |
| chains | |
| 12. epta/upta hit known bug in VC++ implementation of 64b | |
| data types | |
| 13. final W calculation in Tops-20 paging was incorrect | |
| 14. Timer representation lost sub msec values | |
| 15. UBA initialization reset the UBA itself | |
| 16. RHCS1: writing IE cannot trigger an interrupt | |
| 17. Tape bootstrap was set to 800bpi instead of 1600bpi |