| /* i8274.c: Intel i8274 MPSC adapter |
| |
| Copyright (c) 2011, William A. Beech |
| |
| Permission is hereby granted, free of charge, to any person obtaining a |
| copy of this software and associated documentation files (the "Software"), |
| to deal in the Software without restriction, including without limitation |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| and/or sell copies of the Software, and to permit persons to whom the |
| Software is furnished to do so, subject to the following conditions: |
| |
| The above copyright notice and this permission notice shall be included in |
| all copies or substantial portions of the Software. |
| |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| WILLIAM A. BEECH BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| |
| Except as contained in this notice, the name of William A. Beech shall not be |
| used in advertising or otherwise to promote the sale, use or other dealings |
| in this Software without prior written authorization from William A. Beech. |
| |
| These functions support a simulated i8274 interface device on an iSBC. |
| The device had two physical I/O ports which could be connected |
| to any serial I/O device that would connect to an RS232 interface. |
| |
| All I/O is via programmed I/O. The i8274 has a status port |
| and a data port. |
| |
| The simulated device does not support synchronous mode. The simulated device |
| supports a select from I/O space and two address lines. The data port is at the |
| lower address and the status/command port is at the higher address for each |
| channel. |
| |
| Minimum simulation is provided for this device. Channel A is used as a |
| console port for the iSBC-88/45 |
| |
| A write to the status port can select some options for the device: |
| |
| Asynchronous Mode Instruction |
| +---+---+---+---+---+---+---+---+ |
| | S2 S1 EP PEN L2 L1 B2 B1| |
| +---+---+---+---+---+---+---+---+ |
| |
| Baud Rate Factor |
| B2 0 1 0 1 |
| B1 0 0 1 1 |
| sync 1X 16X 64X |
| mode |
| |
| Character Length |
| L2 0 1 0 1 |
| L1 0 0 1 1 |
| 5 6 7 8 |
| bits bits bits bits |
| |
| EP - A 1 in this bit position selects even parity. |
| PEN - A 1 in this bit position enables parity. |
| |
| Number of Stop Bits |
| S2 0 1 0 1 |
| S1 0 0 1 1 |
| invalid 1 1.5 2 |
| bit bits bits |
| |
| Command Instruction Format |
| +---+---+---+---+---+---+---+---+ |
| | EH IR RTS ER SBRK RxE DTR TxE| |
| +---+---+---+---+---+---+---+---+ |
| |
| TxE - A 1 in this bit position enables transmit. |
| DTR - A 1 in this bit position forces *DTR to zero. |
| RxE - A 1 in this bit position enables receive. |
| SBRK - A 1 in this bit position forces TxD to zero. |
| ER - A 1 in this bit position resets the error bits |
| RTS - A 1 in this bit position forces *RTS to zero. |
| IR - A 1 in this bit position returns the 8251 to Mode Instruction Format. |
| EH - A 1 in this bit position enables search for sync characters. |
| |
| A read of the status port gets the port status: |
| |
| Status Read Format |
| +---+---+---+---+---+---+---+---+ |
| |DSR SD FE OE PE TxE RxR TxR| |
| +---+---+---+---+---+---+---+---+ |
| |
| TxR - A 1 in this bit position signals transmit ready to receive a character. |
| RxR - A 1 in this bit position signals receiver has a character. |
| TxE - A 1 in this bit position signals transmitter has no more characters to transmit. |
| PE - A 1 in this bit signals a parity error. |
| OE - A 1 in this bit signals an transmit overrun error. |
| FE - A 1 in this bit signals a framing error. |
| SD - A 1 in this bit position returns the 8251 to Mode Instruction Format. |
| DSR - A 1 in this bit position signals *DSR is at zero. |
| |
| A read to the data port gets the buffered character, a write |
| to the data port writes the character to the device. |
| |
| */ |
| |
| #include <stdio.h> |
| |
| #include "multibus_defs.h" |
| |
| #define UNIT_V_ANSI (UNIT_V_UF + 0) /* ANSI mode */ |
| #define UNIT_ANSI (1 << UNIT_V_ANSI) |
| |
| /* register definitions */ |
| /* channel A */ |
| uint8 wr0a = 0, /* command register */ |
| wr1a = 0, /* enable register */ |
| wr2a = 0, /* mode register */ |
| wr3a = 0, /* configuration register 1 */ |
| wr4a = 0, /* configuration register 2 */ |
| wr5a = 0, /* configuration register 3 */ |
| wr6a = 0, /* sync low byte */ |
| wr7a = 0, /* sync high byte */ |
| rr0a = 0, /* status register */ |
| rr1a = 0, /* error register */ |
| rr2a = 0; /* read interrupt vector */ |
| /* channel B */ |
| uint8 wr0b = 0, /* command register */ |
| wr1b = 0, /* enable register */ |
| wr2b = 0, /* CH B interrups vector */ |
| wr3b = 0, /* configuration register 1 */ |
| wr4b = 0, /* configuration register 2 */ |
| wr5b = 0, /* configuration register 3 */ |
| wr6b = 0, /* sync low byte */ |
| wr7b = 0, /* sync high byte */ |
| rr0b = 0, /* status register */ |
| rr1b = 0, /* error register */ |
| rr2b = 0; /* read interrupt vector */ |
| |
| /* function prototypes */ |
| |
| t_stat i8274_svc (UNIT *uptr); |
| t_stat i8274_reset (DEVICE *dptr); |
| int32 i8274As(int32 io, int32 data); |
| int32 i8274Ad(int32 io, int32 data); |
| int32 i8274Bs(int32 io, int32 data); |
| int32 i8274Bd(int32 io, int32 data); |
| |
| /* i8274 Standard I/O Data Structures */ |
| |
| UNIT i8274_unit = { UDATA (NULL, 0, 0), KBD_POLL_WAIT }; |
| |
| REG i8274_reg[] = { |
| { HRDATA (WR0A, wr0a, 8) }, |
| { HRDATA (WR1A, wr1a, 8) }, |
| { HRDATA (WR2A, wr2a, 8) }, |
| { HRDATA (WR3A, wr3a, 8) }, |
| { HRDATA (WR4A, wr4a, 8) }, |
| { HRDATA (WR5A, wr5a, 8) }, |
| { HRDATA (WR6A, wr6a, 8) }, |
| { HRDATA (WR7A, wr7a, 8) }, |
| { HRDATA (RR0A, rr0a, 8) }, |
| { HRDATA (RR0A, rr1a, 8) }, |
| { HRDATA (RR0A, rr2a, 8) }, |
| { HRDATA (WR0B, wr0b, 8) }, |
| { HRDATA (WR1B, wr1b, 8) }, |
| { HRDATA (WR2B, wr2b, 8) }, |
| { HRDATA (WR3B, wr3b, 8) }, |
| { HRDATA (WR4B, wr4b, 8) }, |
| { HRDATA (WR5B, wr5b, 8) }, |
| { HRDATA (WR6B, wr6b, 8) }, |
| { HRDATA (WR7B, wr7b, 8) }, |
| { HRDATA (RR0B, rr0b, 8) }, |
| { HRDATA (RR0B, rr1b, 8) }, |
| { HRDATA (RR0B, rr2b, 8) }, |
| { NULL } |
| }; |
| MTAB i8274_mod[] = { |
| { UNIT_ANSI, 0, "TTY", "TTY", NULL }, |
| { UNIT_ANSI, UNIT_ANSI, "ANSI", "ANSI", NULL }, |
| { 0 } |
| }; |
| |
| DEBTAB i8274_debug[] = { |
| { "ALL", DEBUG_all }, |
| { "FLOW", DEBUG_flow }, |
| { "READ", DEBUG_read }, |
| { "WRITE", DEBUG_write }, |
| { "LEV1", DEBUG_level1 }, |
| { "LEV2", DEBUG_level2 }, |
| { NULL } |
| }; |
| |
| DEVICE i8274_dev = { |
| "8274", //name |
| &i8274_unit, //units |
| i8274_reg, //registers |
| i8274_mod, //modifiers |
| 1, //numunits |
| 16, //aradix |
| 32, //awidth |
| 1, //aincr |
| 16, //dradix |
| 8, //dwidth |
| NULL, //examine |
| NULL, //deposit |
| i8274_reset, //reset |
| NULL, //boot |
| NULL, //attach |
| NULL, //detach |
| NULL, //ctxt |
| DEV_DEBUG, //flags |
| 0, //dctrl |
| i8274_debug, //debflags |
| NULL, //msize |
| NULL //lname |
| }; |
| |
| /* Service routines to handle simulator functions */ |
| |
| /* service routine - actually gets char & places in buffer in CH A*/ |
| |
| t_stat i8274_svc (UNIT *uptr) |
| { |
| int32 temp; |
| |
| sim_activate (&i8274_unit, i8274_unit.wait); /* continue poll */ |
| if ((temp = sim_poll_kbd ()) < SCPE_KFLAG) |
| return temp; /* no char or error? */ |
| i8274_unit.buf = temp & 0xFF; /* Save char */ |
| rr0a |= 0x01; /* Set rx char ready */ |
| |
| /* Do any special character handling here */ |
| |
| i8274_unit.pos++; |
| return SCPE_OK; |
| } |
| |
| /* Reset routine */ |
| |
| t_stat i8274_reset (DEVICE *dptr) |
| { |
| wr0a = wr1a = wr2a = wr3a = wr4a = wr5a = wr6a = wr7a = rr0a = rr1a = rr2a = 0; |
| wr0b = wr1b = wr2b = wr3b = wr4b = wr5b = wr6b = wr7b = rr0b = rr1b = rr2b = 0; |
| printf(" 8274 Reset\n"); |
| return SCPE_OK; |
| } |
| |
| /* I/O instruction handlers, called from the CPU module when an |
| IN or OUT instruction is issued. |
| |
| Each function is passed an 'io' flag, where 0 means a read from |
| the port, and 1 means a write to the port. On input, the actual |
| input is passed as the return value, on output, 'data' is written |
| to the device. |
| |
| The 8274 contains 2 separate channels, A and B. |
| */ |
| |
| /* channel A command/status */ |
| int32 i8274As(int32 io, int32 data) |
| { |
| if (io == 0) { /* read status port */ |
| switch(wr0a & 0x7) { |
| case 0: /* rr0a */ |
| return rr0a; |
| case 1: /* rr1a */ |
| return rr1a; |
| case 2: /* rr1a */ |
| return rr2a; |
| } |
| return 0; /* bad register select */ |
| } else { /* write status port */ |
| switch(wr0a & 0x7) { |
| case 0: /* wr0a */ |
| wr0a = data; |
| if ((wr0a & 0x38) == 0x18) { /* channel reset */ |
| wr0a = wr1a = wr2a = wr3a = wr4a = wr5a = 0; |
| wr6a = wr7a = rr0a = rr1a = rr2a = 0; |
| printf("8274 Channel A reset\n"); |
| } |
| break; |
| case 1: /* wr1a */ |
| wr1a = data; |
| break; |
| case 2: /* wr2a */ |
| wr2a = data; |
| break; |
| case 3: /* wr3a */ |
| wr3a = data; |
| break; |
| case 4: /* wr4a */ |
| wr4a = data; |
| break; |
| case 5: /* wr5a */ |
| wr5a = data; |
| break; |
| case 6: /* wr6a */ |
| wr6a = data; |
| break; |
| case 7: /* wr7a */ |
| wr7a = data; |
| break; |
| } |
| printf("8274 Command WR%dA=%02X\n", wr0a & 0x7, data); |
| return 0; |
| } |
| } |
| |
| /* channel A data */ |
| int32 i8274Ad(int32 io, int32 data) |
| { |
| if (io == 0) { /* read data port */ |
| rr0a &= 0xFE; |
| return (i8274_unit.buf); |
| } else { /* write data port */ |
| sim_putchar(data); |
| } |
| return 0; |
| } |
| |
| /* channel B command/status */ |
| int32 i8274Bs(int32 io, int32 data) |
| { |
| if (io == 0) { /* read status port */ |
| return i8274_unit.u3; |
| } else { /* write status port */ |
| if (data == 0x40) { /* reset port! */ |
| printf("8274 Reset\n"); |
| } else if (i8274_unit.u6) { |
| i8274_unit.u5 = data; |
| printf("8274 Command Instruction=%02X\n", data); |
| } else { |
| i8274_unit.u4 = data; |
| printf("8274 Mode Instruction=%02X\n", data); |
| i8274_unit.u6++; |
| } |
| return (0); |
| } |
| } |
| |
| /* channel B data */ |
| int32 i8274Bd(int32 io, int32 data) |
| { |
| if (io == 0) { /* read data port */ |
| i8274_unit.u3 &= 0xFD; |
| return (i8274_unit.buf); |
| } else { /* write data port */ |
| sim_putchar(data); |
| } |
| return 0; |
| } |
| |
| /* end of i8274.c */ |