Rivoreo Source Code Repositories
src.rivoreo.one / emulators / simh / 3083933952d5be529dc16b8fb83661d2aea01ed7 / . / HP2100 / hp2100_diag.txt
blob: c938248486691d9bd12d137a200195fc176fd0b0 [file] [log] [blame] [raw]
SIMH/HP 21XX DIAGNOSTICS PERFORMANCE
====================================
Last update: 2012-03-30
The HP 24396 diagnostic suite has been run against the SIMH HP 21xx simulation.
Diagnostic programs were obtained from two magnetic tapes, HP 24396-13601 Rev.
1713 and Rev. 2326, plus a few standalone paper tapes. For each diagnostic, the
recommended standard tests were selected, plus any available optional tests that
broadened the test coverage.
Except where noted in the individual diagnostic reports, the test system
configuration is the default SIMH configuration with these alterations:
* All I/O devices are enabled.
* The CPU is configured as a 1000-E with 128KW of memory.
Detailed diagnostic configuration, operation, and results are given after the
summary table. These may be used to duplicate the diagnostic results.
The results of the diagnostic runs are summarized below:
Date SIMH
DSN Diagnostic Name Code Vers. Result
------ --------------------------------------- ---- ----- -------------
000200 Diagnostic Configurator Pretest 1627 3.2-3 Passed
101100 Memory Reference Instruction Group 1624 3.2-3 Passed
101001 Alter-Skip Instruction Group 1431 3.2-3 Passed
101002 Shift-Rotate Instruction Group 1431 3.2-3 Passed
102200 Core Memory (2100/16/15/14) 1624 3.3-0 Passed
102104 Semiconductor Memory (21MX) 1644 3.2-3 Passed
101004 EAU Instruction Group 1431 3.2-3 Passed
101207 Floating Point Instruction Group 1551 3.2-3 Passed
102001 Memory Protect 1431 3.7-0 Passed
102002 Memory Parity Check 1431 - No simulation
102305 Memory Protect/Parity Error 1705 3.3-0 Partial
101206 Power Fail/Auto Restart 1635 - No simulation
141203 I/O Instruction Group - I/O Extender 2326 3.2-3 Passed
143300 General Purpose Register 1813 3.2-3 Passed
101105 Direct Memory Access (2114/15/16) 1502 3.7-0 Passed
101220 Direct Memory Access (2100/21MX) 1705 3.2-3 Passed
101011 Extended Instruction Group (Index) 1432 3.2-3 Passed
101112 Extended Instruction Group (Word, Byte) 1728 3.2-3 Passed
101110 2100 Fast FORTRAN Package 1632 3.4-0 Partial
101213 M/E-Series Fast FORTRAN Package 1 1822 3.4-0 Passed
101114 M/E-Series Fast FORTRAN Package 2 1632 3.4-0 Passed
101121 F-Series FPP/SIS/FFP 1926 3.7-0 Passed
101016 2000/Access Comm Processor for 2100 1526 3.2-3 Partial
102103 Memory Expansion Unit 1830 3.2-3 Passed
102103 Semiconductor Memory Microcoded 21MX 1644 - No simulation
103301 Time Base Generator 1830 3.2-3 Passed
103115 12936 Privileged Interrupt 1643 3.8-1 Passed
143300 12620 Breadboard Interface/Priv Int 1813 3.8-1 Passed
103105 12908/12978 WCS 256 Word 1502 - No simulation
103023 13197 WCS 1024 Word 1640 - No simulation
103207 12889 Hardwired Serial Interface 1717 - No simulation
103122 59310 Interface Bus Interface 1728 - No simulation
103003 12587 Asynchronous Data Set Interface 1552 - No simulation
103110 12920 Asynchronous Multiplexer (Data) 1805 3.7-1 Passed
103011 12920 Asynchronous Multiplexer (Cntl) 1444 3.7-1 Passed
103012 12621 Synchronous Data Set (Receive) 1532 - No simulation
103013 12622 Synchronous Data Set (Send) 1532 - No simulation
103116 12967 Synchronous Interface 1438 - No simulation
103017 12966 Asynchronous Data Set 1519 3.8-0 Passed
103121 12968 Asynchronous Comm. Interface 1602 - No simulation
103024 12821 ICD Disc Interface 1928 3.9-0 Passed
104000 2600 Keyboard Display Terminal 1615 - No simulation
104003 Teleprinter 1509 3.2-3 Partial
144105 2762A/B Terminal (Terminet) 1546 - No simulation
104007 2615 Video Terminal 1347 - No simulation
104011 2640 Interactive Terminal 1502 - No simulation
104012 2644 Mini Data Station (non CTU) 1542 - No simulation
104013 2644 Mini Data Station (CTU Only) 1542 - No simulation
104017 92900 Terminal Subsystem (3070, 40280) 1643 - No simulation
105000 2610/14 Line Printer 1451 - No simulation
105101 2767 Line Printer 1611 3.3-0 Passed
105102 2607 Line Printer 1446 3.3-0 Passed
145103 2613/17/18 Line Printer 1633 - No simulation
105104 9866 Line Printer 1541 - No simulation
105106 2631 Printer 1913 - No simulation
105107 2635 Printing Terminal 1913 - No simulation
105105 2608 Line Printer 2026 - No simulation
111001 Disc File (2883) 1451 3.3-0 Partial
111104 12732 Flexible Disc Subsystem 1708 - No simulation
151302 7900/01 Cartridge Disc 1805 3.2-3 Partial
151403 7905/06/20/25 Disc 1805 3.3-1 Partial
104117 92900 Terminal Subsystem 1814 - No simulation
112200 9-Track Magnetic Tape (7970, 13181/3) 2040 3.2-3 Partial
112102 7/9-Track Magnetic Tape (13184 Interf.) 1629 - No simulation
010000 Diagnostic Cross Link 1627 - No simulation
011000 7900/05/20 Disc Initialization 1627 - No simulation
146200 Paper Tape Reader/Punch 1725 3.2-3 Passed
107000 Digital Plotter Interface (CALCOMP) 1540 - No simulation
113100 2892 Card Reader 1537 - No simulation
113001 2894 Card Reader Punch 1728 - No simulation
113003 7261 Card Reader 1546 - No simulation
103006 12909B PROM Writer 1420 - No simulation
The following stand-alone diagnostics were run for devices not supported by the
24396 suite:
Date SIMH
Part Number DSN Diagnostic Name Code Vers. Result
----------- ------ ------------------------------------ ---- ----- ----------
13207-16001 101217 2000/Access Comm Processor for 21MX 1728 3.2-3 Passed
20433-60001 -- HP 3030 Magnetic Tape Subsystem -- - Not tested
22682-16017 177777 HP 2100 Fixed Head Disc/Drum (277x) 1612 3.3-0 Passed
24197-60001 -- 12875 Processor Interconnect Cable B 3.7-1 Passed
24203-60001 -- HP2100A Cartridge Disc Memory (2871) A 3.3-0 Partial
The following online diagnostics were run for devices not supported by the
offline diagnostics:
Date Host Date SIMH
Part Number Diagnostic Name Code Op. Sys. Code Vers. Result
----------- ------------------------------- ---- -------- ---- ----- ----------
12824-16002 Vector Instruction Set Firmware 2026 RTE-IVB 5010 3.8-0 Passed
91711-12032 ICD/MAC Disc Diagnostic 2201 RTE-IVB 5010 3.9-0 Partial
92067-16013 Extended Memory Area Firmware 1805 RTE-IVB 5010 3.8-0 Passed
12829-16006 Vector Instruction Set Firmware 2226 RTE-6/VM 6200 3.8-0 Passed
92084-16423 Virtual Memory Area Firmware 2121 RTE-6/VM 6200 3.8-0 Passed
92835-16006 SIGNAL/1000 Firmware Diagnostic 2040 RTE-6/VM 6200 3.8-0 Passed
The "SIMH Version" is the version number of the earliest SIMH system that was
tested with the given diagnostic. Earlier versions may or may not work
properly.
The "Result" column indicates the level of success in passing the given
diagnostic:
Term Meaning
------------- ---------------------------------------------------------------
Passed All of the standard tests relevant to the hardware model passed
without error. Optional "utility" tests, where present, were
not run unless they broadened the test coverage.
Partial One or more of the standard tests relevant to the hardware
model were either excluded or failed as expected, due to known
limitations in the simulation, e.g., the lack of "defective
cylinder" flags in a disc simulation.
Failed One or more of the standard tests relevant to the hardware
model failed unexpectedly.
Not tested The diagnostic has not been run with the device simulation.
No simulation A simulation of the given device does not exist.
See the "Test Notes" associated with each diagnostic report below for details on
subsets, limitations, or errors encountered.
24396 DIAGNOSTIC SUITE DETAILED EXECUTION AND RESULTS
=====================================================
Each execution note below presumes that the target diagnostic has been loaded.
For all runs other than the diagnostic configurator pretest, the configurator
was used in automatic mode to load the target diagnostic via its Diagnostic
Serial Number (DSN), as follows:
sim> attach -r MSC0 24396-13601_Rev-2326.abin.tape
sim> deposit S 000000
sim> boot MSC0
HALT instruction 102077
sim> deposit A [DSN]
sim> deposit B 000000
sim> deposit S 113011
sim> reset
sim> go 100
For the pretest, only the first three commands above were used to load the
diagnostic configurator.
--------------------------------------------
DSN 000200 - Diagnostic Configurator Pretest
--------------------------------------------
TESTED DEVICE: CPU (hp2100_cpu.c)
CONFIGURATION: sim> deposit S 000011
sim> reset
sim> go 2
TEST REPORT: HALT instruction 102077
TEST RESULT: Passed.
-----------------------------------------------
DSN 101100 - Memory Reference Instruction Group
-----------------------------------------------
TESTED DEVICE: CPU (hp2100_cpu.c)
CONFIGURATION: sim> deposit S 000000
sim> reset
sim> go 100
TEST REPORT: HALT instruction 102077
TEST RESULT: Passed.
------------------------------------
DSN 101001 - Alter-Skip Instructions
------------------------------------
TESTED DEVICE: CPU (hp2100_cpu.c)
CONFIGURATION: sim> deposit S 000000
sim> reset
sim> go 100
TEST REPORT: HALT instruction 102077
TEST RESULT: Passed.
--------------------------------------
DSN 101002 - Shift-Rotate Instructions
--------------------------------------
TESTED DEVICE: CPU (hp2100_cpu.c)
CONFIGURATION: sim> deposit S 000000
sim> reset
sim> go 100
TEST REPORT: HALT instruction 102077
TEST RESULT: Passed.
----------------------------------------
DSN 102200 - Core Memory (2100/16/15/14)
----------------------------------------
TESTED DEVICE: CPU (hp2100_cpu.c)
CONFIGURATION: sim> set CPU 2100
sim> set CPU 32K
sim> deposit S 000000
sim> reset
sim> go 100
TEST REPORT: HALT instruction 102077
TEST RESULT: Passed.
---------------------------------
DSN 102104 - Semiconductor Memory
---------------------------------
TESTED DEVICE: CPU (hp2100_cpu.c)
CONFIGURATION: sim> deposit S 001000
sim> reset
sim> go 100
HALT instruction 102075
sim> deposit A 054777
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: HALT instruction 102077
TEST RESULT: Passed.
TEST NOTES: The standard tests 00-10, plus optional tests 13, 14, and 16 are
executed.
----------------------------------
DSN 101004 - EAU Instruction Group
----------------------------------
TESTED DEVICE: CPU (hp2100_cpu1.c)
CONFIGURATION: sim> deposit S 000000
sim> reset
sim> go 100
TEST REPORT: 2100 SERIES EAU DIAGNOSTIC
END OF PASS 1
HALT instruction 102077
TEST RESULT: Passed.
---------------------------------------------
DSN 101207 - Floating Point Instruction Group
---------------------------------------------
TESTED DEVICE: CPU (hp2100_cpu2.c)
CONFIGURATION: sim> deposit S 000000
sim> reset
sim> go 100
TEST REPORT: 2100-21MX FLOATING POINT DIAGNOSTIC
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
---------------------------
DSN 102001 - Memory Protect
---------------------------
TESTED DEVICE: MP (hp2100_cpu.c)
CONFIGURATION: sim> set CPU 2100
sim> set CPU 32K
sim> deposit S 000000
sim> reset
sim> go 100
TEST REPORT: HP 2100 SERIES MEMORY PROTECT DIAGNOSTIC
H07. PRESS PRESET (EXT/INT), RUN
HALT instruction 102007
sim> reset
sim> go
H13. PRESS HALT, PRESET(INT), RUN
IN LESS THAN 15 SEC.
[CTRL+E]
Simulation stopped
sim> reset
sim> go
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
----------------------------------------
DSN 102305 - Memory Protect/Parity Error
----------------------------------------
TESTED DEVICE: MP (hp2100_cpu.c)
CONFIGURATION: sim> set LPS diag
sim> deposit S 140014
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 001000
sim> reset
sim> go
MEMORY PROTECT-PARITY ERROR DIAGNOSTIC
HALT instruction 102075
sim> deposit A 035777
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: H061 POWER DOWN COMPUTER
INSTALL JUMPERS PER TABLE 3-5 IN MOD
POWER UP COMPUTER
HALT instruction 102061
sim> set MP jsbout,intout,sel1in
sim> go
H314 PRESS HALT,PRESET AND RUN WITHIN 30 SECONDS
[CTRL+E]
Simulation stopped
sim> reset
sim> go
PASS 000001
H062 POWER DOWN COMPUTER
SET JUMPERS TO INITIAL SETTINGS
PER TABLE 3-1 IN MOD
POWER UP COMPUTER
HALT instruction 102062
sim> set MP jsbin,intin,sel1out
sim> go
HALT instruction 102077
TEST RESULT: Partially passed.
TEST NOTES: Test 10 is not executed. This test verifies parity error
detection. This feature is not simulated.
----------------------------------
DSN 141103 - I/O Instruction Group
----------------------------------
TESTED DEVICE: CPU (hp2100_cpu.c)
CONFIGURATION: sim> set LPS diag
sim> deposit S 000014
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: I-O INSTRUCTION GROUP & CHANNEL OR
EXTENDER DIAGNOSTIC DSN 141103
H033 SET S-REG TO 125252, PRESS RUN
HALT instruction 102033
sim> deposit S 125252
sim> go
H033 SET S-REG TO 052525, PRESS RUN
HALT instruction 102033
sim> deposit S 052525
sim> go
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
-------------------------------------
DSN 143300 - General Purpose Register
-------------------------------------
TESTED DEVICE: LPS (hp2100_lps.c)
CONFIGURATION: sim> set LPS diag
sim> deposit S 000014
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: GENERAL PURPOSE REGISTER DIAGNOSTIC, DSN 143300
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BASIC I-O COMPLETED
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
----------------------------------------------
DSN 101105 - Direct Memory Access (2114/15/16)
----------------------------------------------
TESTED DEVICE: DMA0/DMA1 (hp2100_cpu.c)
CONFIGURATION: sim> set CPU 2116
sim> set CPU 16K
sim> set LPS diag
sim> deposit S 000014
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: H0. START DMA DIAGNOSTIC
HALT instruction 102027
sim> reset
sim> go
H77. END DIAGNOSTIC
HALT instruction 102077
TEST RESULT: Passed.
----------------------------------------------
DSN 101105 - Direct Memory Access (2114/15/16)
----------------------------------------------
TESTED DEVICE: DMA0 (hp2100_cpu.c)
CONFIGURATION: sim> set CPU 2114
sim> set CPU 16K
sim> set LPS diag
sim> deposit 003612 004036
sim> deposit S 000014
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: H0. START DMA DIAGNOSTIC
HALT instruction 102027
sim> reset
sim> go
H77. END DIAGNOSTIC
HALT instruction 102077
TEST RESULT: Passed.
TEST NOTES: Diagnostic tapes 24322-16001 Revs. 1431 and 1502 have a bug in
Test 17. Test 17 checks byte unpacking for output transfers on
2115 and 2116 computers. The documentation says that it is not
performed on 2114 computers. The prolog for Test 17 does check
if packing is supported, and if not, it skips the test.
However, the target of the skip is not the entry to Test 20 but
is instead the short version of Test 17. When DMA channel 2 is
tested in Test 17, it fails with:
E53. D2 FLG CLR
E71. D2 OUT. GOOD=000001, BAD=000000
...because there is no DMA channel 2 on the 2114.
We work around this problem by setting the jump target to Test
20 with "deposit 003612 004036".
---------------------------------------------
DSN 101220 - Direct Memory Access (2100/21MX)
---------------------------------------------
TESTED DEVICE: DCPC0/DCPC1 (hp2100_cpu.c)
CONFIGURATION: sim> set LPS diag
sim> deposit S 000014
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: DMA-DCPC DIAGNOSTIC
H324 PRESS PRESET AND RUN
HALT instruction 107024
sim> reset
sim> go
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
-----------------------------------------------
DSN 101011 - Extended Instruction Group (Index)
-----------------------------------------------
TESTED DEVICE: CPU (hp2100_cpu2.c)
CONFIGURATION: sim> deposit S 000000
sim> reset
sim> go 100
TEST REPORT: EIG (INDEX) DIAGNOSTIC
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
---------------------------------------------------------
DSN 101112 - Extended Instruction Group (Word, Byte, Bit)
---------------------------------------------------------
TESTED DEVICE: CPU (hp2100_cpu2.c)
CONFIGURATION: sim> set LPS diag
sim> deposit S 000014
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: EIG (WORD,BYTE,BIT) DIAGNOSTIC DSN 101112
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
--------------------------------------
DSN 101110 - 2100 Fast FORTRAN Package
--------------------------------------
TESTED DEVICE: CPU (hp2100_cpu3.c)
CONFIGURATION: sim> set CPU 2100
sim> set CPU 32K
sim> set CPU FFP
sim> deposit S 000013
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: START 2100A-S FFP DIAGNOSTIC
H030 .GOTO TEST
H050 .ENTR TEST
H060 .ENTP TEST
H100 .SETP TEST
H110 ..MAP TEST
H120 SNGL TEST
H130 DBLE TEST
H140 .XADD TEST
TEST 07
E142 NOT INTERRUPTIBLE
HALT instruction 106042
sim> go
H150 .XSUB TEST
H160 .XMPY TEST
TEST 11
E162 NOT INTERRUPTIBLE
HALT instruction 106062
sim> go
H200 .XDIV TEST
H210 .DFER TEST
H220 .XFER TEST
PASS 000001
HALT instruction 102077
TEST RESULT: Partially passed.
TEST NOTES: Tests 07 and 11 test the interruptibility of the .XADD and .XMPY
instructions. These features are not simulated.
----------------------------------------------
DSN 101213 - M/E-Series Fast FORTRAN Package 1
----------------------------------------------
TESTED DEVICE: CPU (hp2100_cpu3.c)
CONFIGURATION: sim> set CPU FFP
sim> set LPS diag
sim> deposit S 000014
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: START 21MX FFP DIAGNOSTIC 1
H110 ..MAP TEST
H120 SNGL TEST
H130 DBLE TEST
H210 .DFER TEST
H220 .XFER TEST
H230 PWR2 TEST
H240 .PACK TEST
H250 FLUN TEST
H260 .XPAK TEST
H300 .XCOM TEST
H310 ..DCM TEST
H320 DDINT TEST
H330 .CFER TEST
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
----------------------------------------------
DSN 101114 - M/E-Series Fast FORTRAN Package 2
----------------------------------------------
TESTED DEVICE: CPU (hp2100_cpu3.c)
CONFIGURATION: sim> set CPU FFP
sim> set LPS diag
sim> deposit S 000014
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: START 21MX FFP DIAGNOSTIC 2
H030 .GOTO TEST
H050 .ENTR TEST
H060 .ENTP TEST
H100 .SETP TEST
H115 XADD TEST
H125 XSUB TEST
H135 XMPY TEST
H140 .XADD TEST
H150 .XSUB TEST
H160 .XMPY TEST
H200 .XDIV TEST
H215 XDIV TEST
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
---------------------------------
DSN 101121 - F-Series FPP/SIS/FFP
---------------------------------
TESTED DEVICE: CPU (hp2100_cpu3.c)
CONFIGURATION: sim> set CPU 1000-F
sim> set LPS diag
sim> deposit S 000014
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: FPP-SIS-FFP DIAGNOSTIC DSN 101121
BEGIN BASIC CONTROL TEST
OVFL TEST
CONF TEST
BASE RETN TEST
SIS1 RETN TEST
SIS2 RETN TEST
SIS3 RETN TEST
FPP1 RETN TEST
FFP2 RETN TEST
FFP3 RETN TEST
END BASIC CONTROL TEST
LONG PASSES
FIXS TEST
FIXD TEST
FLTS TEST
FLTD TEST
ADD TEST
SUB TEST
MPY TEST
DIV TEST
ACC TEST
SIS1 TEST
SIS2 TEST
SIS3 TEST
FFP1 TEST
FFP2 TEST
FFP3 TEST
PASS 00001
HALT instruction 102077
TEST RESULT: Passed.
------------------------------------------------
DSN 101016 - 2000/Access Comm Processor for 2100
------------------------------------------------
TESTED DEVICE: CPU (hp2100_cpu2.c)
CONFIGURATION: sim> set CPU 2100
sim> set CPU 32K
sim> set CPU IOP
sim> deposit S 000013
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: 2100 2000-ACCESS COMM. PROC. FIRMWARE DIAGNOSTIC
H030 CRC TEST
H040 ENQ, DEQ AND PENQ TESTS
H060 IAL TEST
H110 READF, SAVE AND RESTR TESTS
H120 LAI AND SAI TESTS
H130 PFREX TEST
H140 PFREI TEST
H150 PFRIO TEST
H160 STORE-LOAD BYTE, TRSLT
AND BYTE MOVE TEST
TEST 10
E165 TRSLT NOT INTERRUPTIBLE
HALT instruction 106065
sim> go
H230 WORD MOVE TEST
TEST 11
E234 WORD MOVE NOT INTERRUPTIBLE
HALT instruction 103034
sim> go
PASS 000001
HALT instruction 102077
TEST RESULT: Partially passed.
TEST NOTES: Tests 10 and 11 test the interruptibility of the TRSLT and MWORD
instructions. These features are not simulated.
----------------------------------
DSN 102103 - Memory Expansion Unit
----------------------------------
TESTED DEVICE: CPU (hp2100_cpu2.c)
CONFIGURATION: sim> set LPS diag
sim> deposit S 000014
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 001000
sim> reset
sim> go
MEMORY EXPANSION MODULE DIAGNOSTIC, DSN = 102103
HALT instruction 102075
sim> deposit A 177777
sim> deposit B 000037
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: H115 PRESS HALT-PRESET-RUN IN LESS THAN 10 SECONDS
[CTRL+E]
Simulation stopped
sim> reset
sim> go
H117 PRESET TEST COMPLETE
H327 00128K OF CONTIGUOUS MEMORY INSTALLED
H024 PRESS PRESET, RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
TEST NOTES: The standard tests 00-22 plus optional tests 23 and 24 are
executed.
Test 25 (Register Crusher Test) is not executed. This test is
designed specifically for the RAM chips present on the hardware
and isn't relevant to simulation.
Test 23 cannot be run with more than 256K of memory, or the
diagnostic will be corrupted. There is a fixed-size table in
revision 1830 that overflows if memory size is greater than
256K.
--------------------------------
DSN 103301 - Time Base Generator
--------------------------------
TESTED DEVICE: CLK (hp2100_stddev.c)
CONFIGURATION: sim> set CLK diag
sim> deposit S 100013
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: TBG DIAGNOSTIC, DSN = 103301
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
H030 TEST 01 IN PROGRESS
H030 TEST 02 IN PROGRESS
H030 TEST 03 IN PROGRESS
H030 TEST 04 IN PROGRESS
H030 TEST 05 IN PROGRESS
H030 TEST 06 IN PROGRESS
H030 TEST 07 IN PROGRESS
H030 TEST 10 IN PROGRESS
H030 TEST 11 IN PROGRESS
H030 TEST 12 IN PROGRESS
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
---------------------------------
DSN 103115 - Privileged Interrupt
---------------------------------
TESTED DEVICE: PIF (hp2100_pif.c)
CONFIGURATION: sim> set PIF 12936A
sim> set LPT DEV=44
sim> deposit S 004414
sim> reset
sim> go 100
HALT instruction 102070
sim> deposit S 000037
sim> go
HALT instruction 102074
sim> deposit S 000000
sim> go
TEST REPORT: 12936 PRIVILEGED INTERRUPT CARD DIAGNOSTIC
H032 PRESS PRESET(EXT), RUN
HALT instruction 102032
sim> reset
sim> go
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
-------------------------------------
DSN 143300 - General Purpose Register
-------------------------------------
TESTED DEVICE: PIF (hp2100_pif.c)
CONFIGURATION: sim> set PIF 12620A
sim> deposit S 000037
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 001000
sim> go
TEST REPORT: GENERAL PURPOSE REGISTER DIAGNOSTIC, DSN 143300
HALT instruction 102075
sim> deposit A 000001
sim> deposit S 000000
sim> go
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BASIC I-O COMPLETED
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
---------------------------------------------------
DSN 103110 - 12920A Asynchronous Multiplexer (Data)
---------------------------------------------------
TESTED DEVICE: MUX, MUXL (hp2100_mux.c)
CONFIGURATION: sim> set MUX DIAG
sim> deposit S 004040
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: ASYNC MULTIPLEXER DATA BOARD DIAGNOSTIC DSN 103110
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
---------------------------------------------------
DSN 103011 - 12920A Asynchronous Multiplexer (Cntl)
---------------------------------------------------
TESTED DEVICE: MUXM (hp2100_mux.c)
CONFIGURATION: sim> set MUX DIAG
sim> deposit S 004042
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: ASYNC MULTIPLEXER CONTROL BOARD DIAGNOSTIC
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
----------------------------------------
DSN 103017 - 12966 Asynchronous Data Set
----------------------------------------
TESTED DEVICE: BACI (hp2100_baci.c)
CONFIGURATION: sim> set BACI realtime
sim> set BACI diag
sim> deposit S 000035
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: BUFFERED ASYNC COMM INTFC DIAG
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
PASS 000001
TEST RESULT: Passed.
-------------------------------------
DSN 103024 - 12821 ICD Disc Interface
-------------------------------------
TESTED DEVICE: DA, DC (hp2100_di.c, hp2100_di_da.c)
CONFIGURATION: sim> set DA DIAG
sim> set DA ADDRESS=5
sim> deposit S 000000
sim> reset
sim> go 100
TEST REPORT: *** HPIB 12821A DIAGNOSTIC ***
INSTRUCTIONS:
1. ENTER ? WHEN YOU NEED MORE INFORMATION.
2. INDICATE OCTAL VALUES BY A FINAL B (E.G. 13B).
3. SET SR BIT 15 ON TO LOOP ON DIAGNOSTIC,
TOGGLE ON,OFF TO BREAK OUT OF A SINGLE TEST
LOOP (CONVERSATIONAL-MODE).
4. SET SR BIT 14 TO SUPPRESS PRESET TEST
5. SET SR BIT 13 T0 PRINT ONLY ERROR MESSAGES
(EXCEPT CONFIGURATION MESSAGES).
6. SET SR BIT 12 TO DELAY 1 SECOND BETWEEN TESTS
IS THE FIRST CARD IN SELECT CODE 43B?
IF YES, INPUT CARRIAGE RETURN
OTHERWISE, INPUT THE CORRECT SELECT CODE.. [CR entered]
INPUT THE LAST OCTAL DIGIT OF THE BUS
ADDRESS (0-7 DERIVED FROM S1-S3) ... 5
IS THE SECOND CARD IN SELECT CODE 44B?
IF YES, INPUT CARRIAGE RETURN
IF NO SECOND CARD, INPUT 77B
IF DIAGNOSTIC GUESSED INCORRECTLY AND THERE IS
A SECOND CARD, ENTER CORRECT SELECT CODE... [CR entered]
INPUT THE LAST OCTAL DIGIT OF THE BUS
ADDRESS (0-7 DERIVED FROM S1-S3) ... 0
PROGRAM OPTIONS:
CR - CARRIAGE RETURN- (DEFAULT) EXECUTE DIAG.
FROM TEST 0.
N - BEGIN EXECUTION FROM TEST N
LN - LOOP ON TEST N
(TOGGLE SW BIT 15 TO REGAIN CONTROL)
E - EXIT PROGRAM WITH HLT77
(PRESS RUN TO RE-ENTER PROGRAM)
F - FORCE TESTING TO SECOND BOARD
G - GO BACK AND RETEST BOARD ONE
R - GO BACK TO RECONFIGURATION SECTION
? [CR entered]
PRESS HALT,PRESET,RUN WITHIN 10 SECONDS !
[CTRL+E]
Simulation stopped
sim> reset
sim> go
TESTING COMPLETED ON SELECT CODE 43B
PRESS HALT,PRESET,RUN WITHIN 10 SECONDS !
[CTRL+E]
Simulation stopped
sim> reset
sim> go
TESTING COMPLETED ON SELECT CODE 44B
(T15)..DI TO HP-IB TO DI TEST PASSES !
? E
HALT instruction 102077
TEST RESULT: Passed.
------------------------
DSN 104003 - Teleprinter
------------------------
TESTED DEVICE: TTY (hp2100_stddev.c)
CONFIGURATION: sim> deposit S 000011
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 001000
sim> reset
sim> go
START TTY DIAGNOSTIC
HALT instruction 102075
sim> deposit A 000373
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
H030 TURN TTY PUNCH ON
PRESS RUN
HALT instruction 102030
sim> attach TTY2 scratch.2752.punch
sim> go
H045 TURN TTY PUNCH OFF
PRESS RUN
HALT instruction 102045
sim> detach TTY2
sim> deposit S 100000
sim> go
HALT instruction 102076
sim> go
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
HALT instruction 102076
sim> set console WRU=003
sim> go
INPUT THE FOLLOWING:
1 2 3 4 5 6 7 8 9 0 : -
Q W E R T Y U I O P
A S D F G H J K L ;
Z X C V B N M , . /
SHIFT+
! " # $ % & ' ( ) * =
_ @ + ^ < > ?
CNTRL+
WRU TAPE NTAP XOFF EOT RU BELL TAB VT FORM
RBOT CR LF
HALT instruction 102076
sim> set console WRU=005
sim> go
INPUT ANY KEY
T H I S 040 I S 040 A 040
T E S T
[CTRL+E]
Simulation stopped
sim> deposit S 000002
sim> go
[CTRL+E]
Simulation stopped
sim> deposit S 000000
sim> go
H044 INPUT TERMINATED
ECHO MODE ANY INPUT IS ECHOED
THIS IS A TEST
[CTRL+E]
Simulation stopped
sim> deposit S 000002
sim> go
[CTRL+E]
Simulation stopped
sim> deposit S 100000
sim> go
H044 INPUT TERMINATED
HALT instruction 102076
sim> deposit TTY TTIME 158000
sim> deposit S 000000
sim> go
PASS 000001
HALT instruction 102077
TEST RESULT: Partially passed.
TEST NOTES: Test 2 is not executed. This test uses the teleprinter paper
tape reader. This feature is not simulated.
Test 7 is the oscillator tolerance test, so the TTY TTIME is set
for realistic timing.
------------------------------
DSN 105101 - 2767 Line Printer
------------------------------
TESTED DEVICE: LPS (hp2100_lps.c)
CONFIGURATION: sim> set LPS realtime
sim> attach LPS scratch.2767.printer
sim> deposit S 000014
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: 2767 L.P. DIAGNOSTIC
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
H035 TURN OFF L.P. POWER
HALT instruction 102035
sim> set LPS poweroff
sim> go
H036 TURN ON L.P. POWER
HALT instruction 102036
sim> set LPS poweron
sim> go
H033 PUT L.P. ON-LINE
HALT instruction 102033
sim> set LPS online
sim> go
H034 MASTER CLEAR L.P.
HALT instruction 102034
sim> set LPS offline
sim> go
H033 PUT L.P. ON-LINE
HALT instruction 102033
sim> set LPS online
sim> go
H040 PUT L.P. OFF-LINE. TOGGLE TOP-OF-FORM SWITCH
HALT instruction 102040
sim> set LPS offline
sim> go
H033 PUT L.P. ON-LINE
HALT instruction 102033
sim> set LPS online
sim> go
H041 PUT L.P. OFF-LINE. TOGGLE PAPER-STEP 5 TIMES
HALT instruction 102041
sim> set LPS offline
sim> go
H033 PUT L.P. ON-LINE
HALT instruction 102033
sim> set LPS online
sim> go
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
TEST NOTES: The simulation provides no manual Master Clear, Top of Form, or
Paper Step functions, so these are merely presumed above.
------------------------------
DSN 105102 - 2607 Line Printer
------------------------------
TESTED DEVICE: LPT (hp2100_lpt.c)
CONFIGURATION: sim> attach LPT scratch.2607.printer
sim> deposit S 100015
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 001000
sim> reset
sim> go
2607 LINE PRINTER DIAGNOSTIC
HALT instruction 102075
sim> deposit A 000377
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
H040 PWR OFF LP,PRESS RUN
HALT instruction 102040
sim> set LPT poweroff
sim> go
H041 PWR ON LP,READY LP,PRESS RUN
HALT instruction 102041
sim> set LPT poweron
sim> go
H042 PRINT SW OFF,PRESS RUN
HALT instruction 102042
sim> set LPT offline
sim> go
H043 PRINT SW ON,PRESS RUN
HALT instruction 102043
sim> set LPT online
sim> go
H044 OPEN PLATEN,PRESS RUN
HALT instruction 102044
sim> set LPT offline
sim> go
H045 CLOSE PLATEN,PRESS RUN
HALT instruction 102045
sim> set LPT online
sim> go
H046 REMOVE PAPER FROM LP,PRESS RUN
HALT instruction 102046
sim> detach LPT
sim> go
H047 RESTORE PAPER IN LP, READY LP,PRESS RUN
HALT instruction 102047
sim> attach LPT scratch.2607.printer
sim> go
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
TEST NOTES: The standard tests 00-07 are executed. Test 08 (operator
design) is selected as a standard test in this diagnostic only
and so is excluded manually.
-----------------------------------------------------
DSN 111001 - HP2100A Disc File (2883) (multiple unit)
-----------------------------------------------------
TESTED DEVICE: DQ (hp2100_dq.c)
CONFIGURATION: sim> attach DQC0 scratch.U0.2883.disc
sim> attach DQC1 scratch.U1.2883.disc
sim> reset
sim> go 100
H0 HP 2100 SERIES DISC FILE(2883) DIAGNOSTIC
H72 ENTER SELECT CODES,DMA CHANNEL IN SWITCH REGISTER,PRESS RUN
HALT instruction 107001
sim> deposit S 002411
sim> go
H1 ENTER PROGRAM OPTIONS IN SWITCH REGISTER,PRESS RUN
HALT instruction 107077
sim> deposit S 000400
sim> go
TEST REPORT: H65 PASS 0001
H65 PASS 0002
[CTRL+E]
Simulation stopped
TEST RESULT: Passed.
TEST NOTES: Two passes are required to test all head/unit combinations.
--------------------------------------------------------
DSN 111001 - HP2100A Disc File (2883) (user interaction)
--------------------------------------------------------
TESTED DEVICE: DQ (hp2100_dq.c)
CONFIGURATION: sim> attach DQC0 scratch.U0.2883.disc
sim> reset
sim> go 100
H0 HP 2100 SERIES DISC FILE(2883) DIAGNOSTIC
H72 ENTER SELECT CODES,DMA CHANNEL IN SWITCH REGISTER,PRESS RUN
HALT instruction 107001
sim> deposit S 002411
sim> go
H1 ENTER PROGRAM OPTIONS IN SWITCH REGISTER,PRESS RUN
HALT instruction 107077
sim> deposit S 000142
sim> go
TEST REPORT: H66 SET FORMAT SWITCH ON UNIT 0,PUSH RUN
HALT instruction 102002
sim> go
H37 READ ADDRESS IN S0
E47 DATA WORD 0000 IS 000000 SHOULD BE 100000
H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0002 UNIT 00
HALT instruction 102001
sim> go
H37 READ ADDRESS IN S0
E47 DATA WORD 0000 IS 000000 SHOULD BE 100001
H51 CYL 0001 HEAD 01 SECTOR 00 WORD COUNT 0002 UNIT 00
HALT instruction 102001
sim> go
H33 WRITE DEFECTIVE TRACK IN S0
E64 STATUS IS 000000 SHOULD BE 000031
H51 CYL 0000 HEAD 01 SECTOR 00 WORD COUNT 0128 UNIT 00
HALT instruction 102001
sim> go
H41 READ DEFECTIVE TRACK IN S0
E64 STATUS IS 000000 SHOULD BE 000031
H51 CYL 0000 HEAD 01 SECTOR 00 WORD COUNT 0128 UNIT 00
HALT instruction 102001
sim> go
H67 CLEAR FORMAT SWITCH ON UNIT 0,PUSH RUN
HALT instruction 102002
sim> go
H33 WRITE DEFECTIVE TRACK IN S0
E64 STATUS IS 000000 SHOULD BE 000031
H51 CYL 0000 HEAD 01 SECTOR 00 WORD COUNT 0128 UNIT 00
HALT instruction 102001
sim> go
H41 READ DEFECTIVE TRACK IN S0
E64 STATUS IS 000000 SHOULD BE 000031
H51 CYL 0000 HEAD 01 SECTOR 00 WORD COUNT 0128 UNIT 00
HALT instruction 102001
sim> go
H42 WRITE PROTECTED TRACK IN S0
E64 STATUS IS 000000 SHOULD BE 000011
H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00
HALT instruction 102001
sim> go
H36 WRITE ADDRESS IN S0
E64 STATUS IS 000000 SHOULD BE 000011
H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0046 UNIT 00
HALT instruction 102001
sim> go
H66 SET FORMAT SWITCH ON UNIT 0,PUSH RUN
HALT instruction 102002
sim> go
H67 CLEAR FORMAT SWITCH ON UNIT 0,PUSH RUN
HALT instruction 102002
sim> go
H70 DISABLE UNIT 0,PUSH RUN
HALT instruction 102002
sim> set DQC0 unloaded
sim> go
H40 ENABLE UNIT 0
[CTRL+E]
Simulation stopped
sim> set DQC0 loaded
sim> go
H71 PRESS PRESET THEN PRESS RUN
HALT instruction 102002
sim> deposit S 010140
sim> reset
sim> go
H74 SHORT PASS
H65 PASS 0001
HALT instruction 102077
TEST RESULT: Partially passed.
TEST NOTES: Step 0 tests the FORMAT OVERRIDE switch, the use of the flagged
track bit to indicate a protected or defective track, and the
ability to write a sector address field that differs from the
sector location to indicate track sparing. These features are
not simulated.
----------------------------------------------------------
DSN 151302 - 7900/01 Cartridge Disc Memory (multiple unit)
----------------------------------------------------------
TESTED DEVICE: DP (hp2100_dp.c)
CONFIGURATION: sim> attach DPC0 scratch.U0.7900.disc
sim> attach DPC1 scratch.U1.7900.disc
sim> attach DPC2 scratch.U2.7900.disc
sim> attach DPC3 scratch.U3.7900.disc
sim> deposit S 000022
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000004
sim> reset
sim> go
H0 7900/7901 CARTRIDGE DISC MEMORY DIAGNOSTIC
H24 CYLINDER TABLE
000,001,002,004,008,016,032,064,128,202
H25 WISH TO CHANGE?
NO
H27 PATTERN TABLE
000000 177777 125252 052525 007417
170360 162745 163346 155555 022222
H25 WISH TO CHANGE?
NO
H62 TYPE A FOR HEADS 0,1;B FOR 2,3;C FOR ALTERNATELY 0,1 THEN 2,3
C
H23 00020 ERRORS/PASS ALLOWED
H25 WISH TO CHANGE?
NO
H37 UNIT TABLE/ 01 DRIVE(S); 0
H25 WISH TO CHANGE?
YES
H34 ENTER UNIT NUMBERS(0-3)SEPARATED BY COMMAS
0,1,2,3
H37 UNIT TABLE/ 04 DRIVE(S); 0 1 2 3
H25 WISH TO CHANGE?
[CTRL+E]
Simulation stopped
sim> deposit S 000000
sim> go
NO
TEST REPORT: H65 LONG PASS 0001,HEADS 0/1,UNIT 00, 0000 ERRORS
H65 LONG PASS 0002,HEADS 0/1,UNIT 01, 0000 ERRORS
H65 LONG PASS 0003,HEADS 0/1,UNIT 02, 0000 ERRORS
H65 LONG PASS 0004,HEADS 0/1,UNIT 03, 0000 ERRORS,MULTI-DRIVE
H65 LONG PASS 0005,HEADS 2/3,UNIT 00, 0000 ERRORS
H65 LONG PASS 0006,HEADS 2/3,UNIT 01, 0000 ERRORS
H65 LONG PASS 0007,HEADS 2/3,UNIT 02, 0000 ERRORS
H65 LONG PASS 0008,HEADS 2/3,UNIT 03, 0000 ERRORS,MULTI-DRIVE
[CTRL+E]
Simulation stopped
TEST RESULT: Passed.
TEST NOTES: Eight passes are required to test all head/unit combinations.
-------------------------------------------------------------
DSN 151302 - 7900/01 Cartridge Disc Memory (user interaction)
-------------------------------------------------------------
TESTED DEVICE: DP (hp2100_dp.c)
CONFIGURATION: sim> attach DPC0 scratch.U0.7900.disc
sim> deposit S 000022
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000160
sim> reset
sim> go
TEST REPORT: H0 7900/7901 CARTRIDGE DISC MEMORY DIAGNOSTIC
H66 SET OVERRIDE SWITCH,PUSH RUN
HALT instruction 102002
sim> go
H46 READ IN STEP 04
E64 STATUS IS 000000 SHOULD BE 000010
H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00
HALT instruction 102001
sim> go
H22 CYCLIC CHECK IN STEP 04
E64 STATUS IS 000000 SHOULD BE 000010
H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0001 UNIT 00
HALT instruction 102001
sim> go
H67 CLEAR OVERRIDE SWITCH,PUSH RUN
HALT instruction 102002
sim> go
H46 READ IN STEP 07
E64 STATUS IS 000000 SHOULD BE 000031
H51 CYL 0001 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00
HALT instruction 102001
sim> go
H45 WRITE IN STEP 08
E64 STATUS IS 000000 SHOULD BE 000011
H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00
HALT instruction 102001
sim> go
H36 INITIALIZE DATA IN STEP 09
E64 STATUS IS 000000 SHOULD BE 000011
H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 6144 UNIT 00
HALT instruction 102001
sim> go
H66 SET OVERRIDE SWITCH,PUSH RUN
HALT instruction 102002
sim> go
H67 CLEAR OVERRIDE SWITCH,PUSH RUN
HALT instruction 102002
sim> go
H70 UNLOAD UNIT 0,PUSH RUN
HALT instruction 102002
sim> set DPC0 unloaded
sim> go
H40 PROTECT U/D THEN READY UNIT 0
[CTRL+E]
Simulation stopped
sim> set DPC0 locked
sim> set DPC0 loaded
sim> go
H41 CLEAR U/D PROTECT,LOAD,PUSH RUN
HALT instruction 102002
sim> set DPC0 writeenabled
sim> go
H71 PRESS PRESET(S) THEN PRESS RUN
HALT instruction 102002
sim> reset
sim> go
H65 SHORT PASS 0001,HEADS 0/1,UNIT 00, 0005 ERRORS
[CTRL+E]
Simulation stopped
TEST RESULT: Partially passed.
TEST NOTES: Steps 4, 7, 8, and 9 test the defective and protected cylinder
bits and the FORMAT switch. These features are not simulated.
-----------------------------------------------
DSN 151403 - 7905/06/20/25 Disc (multiple unit)
-----------------------------------------------
TESTED DEVICE: DS (hp2100_ds.c)
CONFIGURATION: sim> set DS0 7905
sim> set DS1 7906
sim> set DS2 7920
sim> set DS3 7925
sim> set DS4 7905
sim> set DS5 7906
sim> set DS6 7920
sim> set DS7 7925
sim> attach DS0 scratch.U0.7905.disc
sim> attach DS1 scratch.U1.7906.disc
sim> attach DS2 scratch.U2.7920.disc
sim> attach DS3 scratch.U3.7925.disc
sim> attach DS4 scratch.U4.7905.disc
sim> attach DS5 scratch.U5.7906.disc
sim> attach DS6 scratch.U6.7920.disc
sim> attach DS7 scratch.U7.7925.disc
sim> deposit S 000034
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000004
sim> reset
sim> go
H0 79XX/13037 DISC MEMORY DIAGNOSTIC
H37 UNIT TABLE: 01 DRIVE(S); 0
H25 WISH TO CHANGE?
YES
H34 ENTER UNIT NUMBERS(0-7)SEPARATED BY COMMAS
0,1,2,3,4,5,6,7
H37 UNIT TABLE: 08 DRIVE(S); 0 1 2 3 4 5 6 7
H25 WISH TO CHANGE?
NO
ENTER:(U)NIT,(?) ERRS,(H)EAD,(O)UTPUT,(P)ATT,(S)OFT,(C)YL,(M)CPU,(E)XIT
H
H62 HEAD TABLE; UNIT 0 7905A , 02 HEAD(S) 0 1
H62 HEAD TABLE; UNIT 1 7906A , 02 HEAD(S) 0 1
H62 HEAD TABLE; UNIT 2 7920A , 05 HEAD(S) 0 1 2 3 4
H62 HEAD TABLE; UNIT 3 7925A , 09 HEAD(S) 0 1 2 3 4 5 6 7 8
H62 HEAD TABLE; UNIT 4 7905A , 02 HEAD(S) 0 1
H62 HEAD TABLE; UNIT 5 7906A , 02 HEAD(S) 0 1
H62 HEAD TABLE; UNIT 6 7920A , 05 HEAD(S) 0 1 2 3 4
H62 HEAD TABLE; UNIT 7 7925A , 09 HEAD(S) 0 1 2 3 4 5 6 7 8
H25 WISH TO CHANGE?
YES
H132 TYPE UNITS YOU WISH TO CHANGE SEPERATED BY COMMAS
0,1,4,5
H62 HEAD TABLE; UNIT 0 7905A , 02 HEAD(S) 0 1
H106 ENTER HEADS SEPARATED BY COMMAS
0,1,2
H62 HEAD TABLE; UNIT 0 7905A , 03 HEAD(S) 0 1 2
H25 WISH TO CHANGE?
NO
H62 HEAD TABLE; UNIT 1 7906A , 02 HEAD(S) 0 1
H106 ENTER HEADS SEPARATED BY COMMAS
0,1,2,3
H62 HEAD TABLE; UNIT 1 7906A , 04 HEAD(S) 0 1 2 3
H25 WISH TO CHANGE?
NO
H62 HEAD TABLE; UNIT 4 7905A , 02 HEAD(S) 0 1
H106 ENTER HEADS SEPARATED BY COMMAS
0,1,2
H62 HEAD TABLE; UNIT 4 7905A , 03 HEAD(S) 0 1 2
H25 WISH TO CHANGE?
NO
H62 HEAD TABLE; UNIT 5 7906A , 02 HEAD(S) 0 1
H106 ENTER HEADS SEPARATED BY COMMAS
0,1,2,3
H62 HEAD TABLE; UNIT 5 7906A , 04 HEAD(S) 0 1 2 3
H25 WISH TO CHANGE?
NO
ENTER:(U)NIT,(?) ERRS,(H)EAD,(O)UTPUT,(P)ATT,(S)OFT,(C)YL,(M)CPU,(E)XIT
E
TEST REPORT: H121 WARNING-FORMAT SWITCH OFF
H65 LONG PASS 0001,HEAD 012 ,UNIT 0,0000 ERRORS-0000 SOFT
H65 LONG PASS 0002,HEAD 0123 ,UNIT 1,0000 ERRORS-0000 SOFT
H65 LONG PASS 0003,HEAD 01234 ,UNIT 2,0000 ERRORS-0000 SOFT
H65 LONG PASS 0004,HEAD 012345678,UNIT 3,0000 ERRORS-0000 SOFT
H65 LONG PASS 0005,HEAD 012 ,UNIT 4,0000 ERRORS-0000 SOFT
H65 LONG PASS 0006,HEAD 0123 ,UNIT 5,0000 ERRORS-0000 SOFT
H65 LONG PASS 0007,HEAD 01234 ,UNIT 6,0000 ERRORS-0000 SOFT
H65 LONG PASS 0008,HEAD 012345678,UNIT 7,0000 ERRORS-0000 SOFT,MULTI-UNIT
[CTRL+E]
Simulation stopped
TEST RESULT: Passed.
TEST NOTES: Eight passes are required to test all head/unit combinations.
--------------------------------------------------
DSN 151403 - 7905/06/20/25 Disc (user interaction)
--------------------------------------------------
TESTED DEVICE: DS (hp2100_ds.c)
CONFIGURATION: sim> set DS0 7905
sim> attach DS0 scratch.U0.7905.disc
sim> deposit S 000034
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000120
sim> reset
sim> go
H0 79XX/13037 DISC MEMORY DIAGNOSTIC
H37 UNIT TABLE: 01 DRIVE(S); 0
H25 WISH TO CHANGE?
NO
TEST REPORT: H66 SET FORMAT SWITCH ON UNIT 0,PUSH RUN
HALT instruction 102002
sim> set DS0 format
sim> go
H46 READ IN STEP 04
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0
SHOULD BE 0 1 0 00000 XXXX XXXX / 0 000010 0 0 0 1 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET"
START 0000/00/00-LAST 0000/00/01 WORD COUNT 00128,OLD CYL 0000,UNIT 00
HALT instruction 102001
sim> go
H22 VERIFY IN STEP 04
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0
SHOULD BE 0 1 0 00000 XXXX XXXX / 0 000010 0 0 0 1 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET"
START 0000/00/00-LAST 0001/00/00 WORD COUNT 00048,OLD CYL 0000,UNIT 00
HALT instruction 102001
sim> go
H67 CLEAR FORMAT SWITCH ON UNIT 0,PUSH RUN
HALT instruction 102002
sim> set DS0 noformat
sim> go
H46 READ IN STEP 07
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 0 0 0 0 0 0
SHOULD BE 0 0 1 10001 XXXX XXXX / 0 000010 0 0 0 0 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "DEFECTIVE TRK "
START 0001/00/00-LAST 0001/00/01 WORD COUNT 00128,OLD CYL 0000,UNIT 00
HALT instruction 102001
sim> go
H45 WRITE IN STEP 08
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 0 0 0 0 0 0
SHOULD BE 0 1 0 10110 XXXX XXXX / 0 000010 0 0 0 0 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "WRT PROTEC TRK"
START 0000/00/00-LAST 0000/00/01 WORD COUNT 00128,OLD CYL 0001,UNIT 00
HALT instruction 102001
sim> go
H66 SET FORMAT SWITCH ON UNIT 0,PUSH RUN
HALT instruction 102002
sim> set DS0 format
sim> go
H45 WRITE IN STEP 10
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0
SHOULD BE 0 1 0 00000 XXXX XXXX / 0 000010 0 0 0 1 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET"
START 0000/00/00-LAST 0000/00/08 WORD COUNT 01024,OLD CYL 0000,UNIT 00
HALT instruction 102001
sim> go
H70 UNLOAD UNIT 0,PUSH RUN
HALT instruction 102002
sim> set DS0 unloaded
sim> go
H107 READY UNIT 0
[CTRL+E]
Simulation stopped
sim> set DS0 loaded
sim> go
H142 PROTECT U/D,PUSH RUN
HALT instruction 102002
sim> set DS0 locked
sim> go
H143 CLEAR U/D PROTECT,PUSH RUN
HALT instruction 102002
sim> set DS0 writeenabled
sim> go
H110 PRESS PRESET(S),PRESS RUN
HALT instruction 102002
sim> reset
sim> go
H46 READ IN STEP 38
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0
SHOULD BE 0 0 0 00111 0000 0000 / 0 000010 0 0 0 X 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "CYL CMP ERROR "
START 0000/00/01-LAST 0000/00/03 WORD COUNT 00138,OLD CYL 0000,UNIT 00
HALT instruction 102001
sim> go
H46 READ IN STEP 39
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0
SHOULD BE 0 0 0 01001 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "HD/SEC CMP ERR"
START 0000/00/01-LAST 0000/00/03 WORD COUNT 00138,OLD CYL 0000,UNIT 00
HALT instruction 102001
sim> go
H46 READ IN STEP 40
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0
SHOULD BE 0 0 0 01001 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "HD/SEC CMP ERR"
START 0000/00/01-LAST 0000/00/03 WORD COUNT 00138,OLD CYL 0000,UNIT 00
HALT instruction 102001
sim> go
H46 READ IN STEP 41
E47 DATA WORD 0065 IS 075126 SHOULD BE 030400
E47 DATA WORD 0066 IS 000762 SHOULD BE 030400
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0
SHOULD BE 0 0 0 01111 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "POSS CORR DATA"
START 0000/00/00-LAST 0000/00/03 WORD COUNT 00128,OLD CYL 0000,UNIT 00
HALT instruction 102001
sim> go
H46 READ IN STEP 42
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0
SHOULD BE 0 0 0 01000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "UNCOR DATA ERR"
START 0000/00/00-LAST 0000/00/03 WORD COUNT 00276,OLD CYL 0000,UNIT 00
HALT instruction 102001
sim> go
H22 VERIFY IN STEP 43
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0
SHOULD BE 0 0 1 10001 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "DEFECTIVE TRK "
START 0016/00/00-LAST 0017/00/00 WORD COUNT 00048,OLD CYL 0128,UNIT 00
HALT instruction 102001
sim> go
H22 VERIFY IN STEP 43
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0
SHOULD BE 1 0 0 10000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "SPR TRK ACCESS"
START 0128/01/00-LAST 0129/01/00 WORD COUNT 00048,OLD CYL 0016,UNIT 00
HALT instruction 102001
sim> go
H45 WRITE IN STEP 43
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0
SHOULD BE 1 0 0 00000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET"
START 0016/00/33-LAST 0016/00/34 WORD COUNT 00128,OLD CYL 0128,UNIT 00
HALT instruction 102001
sim> go
H46 READ IN STEP 43
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0
SHOULD BE 1 0 0 00000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET"
START 0016/00/33-LAST 0016/00/34 WORD COUNT 00128,OLD CYL 0016,UNIT 00
HALT instruction 102001
sim> go
H46 READ IN STEP 43
E47 DATA WORD 0000 IS 156164 SHOULD BE 144300
E47 DATA WORD 0001 IS 023302 SHOULD BE 117306
E47 DATA WORD 0002 IS 114642 SHOULD BE 045322
H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B
E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0
SHOULD BE 1 0 0 00000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0
H137 TERMINATION STATUS IS "NORMAL COMPLET"
START 0016/00/33-LAST 0016/00/34 WORD COUNT 00128,OLD CYL 0016,UNIT 00
HALT instruction 102001
sim> go
H65 SHORT PASS 0001,HEAD 01 ,UNIT 0,0015 ERRORS-0015 SOFT
[CTRL+E]
Simulation stopped
TEST RESULT: Partially passed.
TEST NOTES: Steps 4, 8, and 10 test the protected cylinder bit. Step 7
tests the defective cylinder bit. Steps 38, 39, and 40 test the
Write Full Sector command. Steps 41 and 42 test error
correction. Step 43 tests the spare cylinder bit and track
sparing. These features are not simulated.
-------------------------------------------------
DSN 112200 - 9-Track Magnetic Tape (7970B, 13181)
-------------------------------------------------
TESTED DEVICE: MS (hp2100_ms.c)
CONFIGURATION: sim> detach MSC0
sim> set MSC 13181A
sim> set MSC realtime
sim> attach MSC0 scratch.U0.7970.tape
sim> attach MSC1 scratch.U1.7970.tape
sim> attach MSC2 scratch.U2.7970.tape
sim> attach MSC3 scratch.U3.7970.tape
sim> deposit S 102030
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000217
sim> reset
sim> go
TEST REPORT: 7970-13181 DIAG.
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
H025 FOR DATA CH
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
H025 FOR CMND CH
H154 UNIT 000000
H034 UNIT ON-LINE
H155 STATUS IS 0 000 000 001 000 000
H154 UNIT 000001
H034 UNIT ON-LINE
H155 STATUS IS 0 000 000 001 000 000
H154 UNIT 000002
H034 UNIT ON-LINE
H155 STATUS IS 0 000 000 001 000 000
H154 UNIT 000003
H034 UNIT ON-LINE
H155 STATUS IS 0 000 000 001 000 000
H154 UNIT 000000
H102 RECORD 000117
H054 COMMAND 000061
H155 STATUS IS 0 000 000 000 000 000
H155 AND SHOULD BE 0 000 000 000 000 000
TEST 23
E135 LRCC ERROR
HALT instruction 106035
sim> go
H154 UNIT 000000
H102 RECORD 000117
H054 COMMAND 000061
H155 STATUS IS 0 000 000 000 000 000
H155 AND SHOULD BE 0 000 000 000 000 000
E141 CRCC ERROR
HALT instruction 106041
sim> go
H126 EXCHANGE REELS
HALT instruction 106026
sim> attach MSC0 scratch.U3.7970.tape
sim> attach MSC1 scratch.U2.7970.tape
sim> attach MSC2 scratch.U1.7970.tape
sim> attach MSC3 scratch.U0.7970.tape
sim> go
H127 SET SW 13 TO LOOP
HALT instruction 106027
sim> go
H130 REMOVE WRITE RING
HALT instruction 106030
sim> set MSC0 locked
sim> go
H131 REPLACE WRITE RING
HALT instruction 106031
sim> set MSC0 writeenabled
sim> go
H137 PUT TAPE UNIT ON-LINE
HALT instruction 106037
sim> set MSC0 online
sim> go
H137 PUT TAPE UNIT ON-LINE
HALT instruction 106037
sim> set MSC1 online
sim> go
H137 PUT TAPE UNIT ON-LINE
HALT instruction 106037
sim> set MSC2 online
sim> go
H137 PUT TAPE UNIT ON-LINE
HALT instruction 106037
sim> set MSC3 online
sim> go
PASS 000001
HALT instruction 102077
TEST RESULT: Partially passed.
TEST NOTES: Test 23 verifies the LRCC and CRCC values obtained from the
interface. These features are not simulated. (Setting bit 7 of
the S register during configuration eliminates most LRCC/CRCC
checks but does not inhibit test 23.)
If test 34 is selected manually, E065 WRITE ERROR will occur.
This is due to the implementation of the tape simulation
library. Test 34 writes data in a single record until a data
error or EOT occurs (conceivably 20+ megabytes for the largest
reel size at 800 bpi). Because the tape simulation library
writes complete records, the 7970 simulator must use a data
buffer to accumulate the entire record before calling
"sim_tape_wrrecf" to write the record. The simulator uses a
data buffer of 32768 words. When the buffer is full,
parity-error status is returned to the program.
-------------------------------------------------
DSN 112200 - 9-Track Magnetic Tape (7970E, 13183)
-------------------------------------------------
TESTED DEVICE: MS (hp2100_ms.c)
CONFIGURATION: sim> detach MSC0
sim> set MSC 13183A
sim> set MSC realtime
sim> attach MSC0 scratch.U0.7970.tape
sim> attach MSC1 scratch.U1.7970.tape
sim> attach MSC2 scratch.U2.7970.tape
sim> attach MSC3 scratch.U3.7970.tape
sim> deposit S 104030
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000017
sim> reset
sim> go
TEST REPORT: 7970-13183 DIAG.
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
H025 FOR DATA CH
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
H025 FOR CMND CH
H154 UNIT 000000
H034 UNIT ON-LINE
H155 STATUS IS 1 000 000 001 000 000
H154 UNIT 000001
H034 UNIT ON-LINE
H155 STATUS IS 1 010 000 001 000 000
H154 UNIT 000002
H034 UNIT ON-LINE
H155 STATUS IS 1 100 000 001 000 000
H154 UNIT 000003
H034 UNIT ON-LINE
H155 STATUS IS 1 110 000 001 000 000
H126 EXCHANGE REELS
HALT instruction 106026
sim> attach MSC0 scratch.U3.7970.tape
sim> attach MSC1 scratch.U2.7970.tape
sim> attach MSC2 scratch.U1.7970.tape
sim> attach MSC3 scratch.U0.7970.tape
sim> go
H127 SET SW 13 TO LOOP
HALT instruction 106027
sim> go
H130 REMOVE WRITE RING
HALT instruction 106030
sim> set MSC0 locked
sim> go
H131 REPLACE WRITE RING
HALT instruction 106031
sim> set MSC0 writeenabled
sim> go
H137 PUT TAPE UNIT ON-LINE
HALT instruction 106037
sim> set MSC0 online
sim> go
H137 PUT TAPE UNIT ON-LINE
HALT instruction 106037
sim> set MSC1 online
sim> go
H137 PUT TAPE UNIT ON-LINE
HALT instruction 106037
sim> set MSC2 online
sim> go
H137 PUT TAPE UNIT ON-LINE
HALT instruction 106037
sim> set MSC3 online
sim> go
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
------------------------------------
DSN 146200 - Paper Tape Reader/Punch
------------------------------------
TESTED DEVICE: PTR and PTP (hp2100_stddev.c)
CONFIGURATION: sim> deposit S 001012
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 001000
sim> reset
sim> go
PAPER TAPE READER AND PUNCH DIAGNOSTIC DSN 146200
HALT instruction 102075
sim> deposit A 000200
sim> reset
sim> go
H060 TO MAKE LOOP, PUNCH ON AND RUN
HALT instruction 102060
sim> attach PTP loop.2895.punch
sim> go
PASS 000001
HALT instruction 102077
sim> detach PTP
sim> deposit S 001000
sim> reset
sim> go 2000
PAPER TAPE READER AND PUNCH DIAGNOSTIC DSN 146200
HALT instruction 102075
sim> deposit A 003177
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: H050 BI-O ON PUNCH
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
H055 BI-O ON READER
H024 PRESS PRESET (EXT&INT),RUN
HALT instruction 102024
sim> reset
sim> go
H025 BI-O COMP
H051 ALL CHARTR COMBINATIONS, PUNCH ONLY
TURN PUNCH ON, PRESS RUN
HALT instruction 102051
sim> attach PTP scratch.2895.punch
sim> go
H052 ALL CHARTR COMBINATIONS, VERIFY
TEAR TAPE AT PUNCH, PLACE IN READER, PRESS RUN
HALT instruction 102052
sim> detach PTP
sim> attach PTR scratch.2895.punch
sim> go
H054 PLACE LOOP IN READER-PRESS RUN
TO START READ, SET BIT0 TO 1
TO EXIT TEST, SET BIT0 TO 0
HALT instruction 102054
sim> set PTR diag
sim> attach PTR loop.2895.punch
sim> deposit S 000001
sim> go
[CTRL+E]
Simulation stopped
sim> deposit S 000000
sim> go
H054 PLACE LOOP IN READER-PRESS RUN
TO START READ, SET BIT0 TO 1
TO EXIT TEST, SET BIT0 TO 0
HALT instruction 102054
sim> deposit S 000001
sim> go
[CTRL+E]
Simulation stopped
sim> deposit PTR TIME 100
sim> deposit PTP TIME 200
sim> deposit S 000000
sim> go
H056 TURN PUNCH ON, PRESS RUN. PUNCH ROUTINE
WILL START. LOAD THE TAPE BEING PUNCHED
INTO THE READER.
TO START READ, SET BIT0 TO 1
TO EXIT, SET BIT0 TO 0
HALT instruction 102056
sim> set PTR reader
sim> attach PTR scratch.2895.punch
sim> attach PTP scratch.2895.punch
sim> go
[CTRL+E]
Simulation stopped
sim> deposit S 000001
sim> go
[CTRL+E]
Simulation stopped
sim> deposit S 000000
sim> go
H057 TO COMPLETE, TEAR TAPE, PRESS RUN
HALT instruction 102057
sim> go
H063 READER SPEED TEST. PLACE LOOP IN READER
BIT 5=0 FOR 2748-58, BIT 5=1 FOR 2737. PRESS RUN.
HALT instruction 102063
sim> set PTR diag
sim> attach PTR loop.2895.punch
sim> deposit PTR TIME 3150
sim> go
H066 TEST 11 COMPLETE
H100 PUNCH SPEED TEST.
BIT 6=0 FOR 2895 OR BIT 6=1 FOR 2753-PRESS RUN
HALT instruction 106000
sim> deposit PTP TIME 20790
sim> go
H103 TEST 12 COMPLETE
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
TEST NOTES: Test 07 is executed to punch a tape loop that is used in tests
04, 05, and 11. Then the default tests 00-06, plus tests 11 and
12, are executed.
Test 06 punches and reads the same tape concurrently (the tape
coming out of the punch is then fed into the reader). Under
simulation, it is necessary to delay starting the read until the
punch buffer has been flushed to the disc. Also, this test
depends on the reader being at least twice as fast as the punch,
so the PTR/PTP TIME registers are adjusted accordingly.
Test 11 and test 12 are speed tests, so the PTR and PTP TIMEs
are set for realistic timing.
STAND-ALONE DIAGNOSTIC DETAILED EXECUTION AND RESULTS
=====================================================
Each execution note below presumes that the target diagnostic has been loaded.
For all runs, the diagnostic configurator was used in automatic mode to load the
target diagnostic from a paper tape image, as follows:
sim> attach -r MSC0 24396-13601_Rev-2326.abin.tape
sim> deposit S 000000
sim> boot MSC0
HALT instruction 102077
sim> attach PTR [paper-tape-image-file]
sim> deposit S 001011
sim> reset
sim> go 100
------------------------------------------------
DSN 101217 - 2000/Access Comm Processor for 21MX
------------------------------------------------
TESTED DEVICE: CPU (hp2100_cpu2.c)
BINARY TAPE: 13207-16001 Rev. 1728
CONFIGURATION: sim> set CPU IOP
sim> deposit S 000013
sim> reset
sim> go 100
HALT instruction 102074
sim> deposit S 000000
sim> reset
sim> go
TEST REPORT: 21MX 2000 COMPUTER SYSTEM COMM. PROC. FIRMWARE DIAGNOSTIC
H030 CRC TEST
H040 ENQ, DEQ AND PENQ TESTS
H060 IAL TEST
H110 INS,READF, SAVE AND RESTR TESTS
H120 LAI AND SAI TESTS
H130 PFREX TEST
H140 PFREI TEST
H150 PFRIO TEST
PASS 000001
HALT instruction 102077
TEST RESULT: Passed.
--------------------------------------------
DSN (none) - HP 3030 Magnetic Tape Subsystem
--------------------------------------------
TESTED DEVICE: MT (hp2100_mt.c)
BINARY TAPE: None available.
CONFIGURATION: (none)
TEST REPORT: (none)
TEST RESULT: Not tested.
TEST NOTES: No copy of the diagnostic (HP product number 20433) has been
found.
-----------------------------------------------------------
DSN 177777 - HP 2100 Fixed Head Disc/Drum Diagnostic (2770)
-----------------------------------------------------------
TESTED DEVICE: DR (hp2100_dr.c)
BINARY TAPE: 22682-16017 Rev. 1612
CONFIGURATION: sim> reset
sim> go 100
H0 2100 SERIES FIXED HEAD DISC/DRUM DIAGNOSTIC
ENTER SELECT CODES, CHANNELS IN SWITCH REGISTER,PUSH RUN
HALT instruction 107001
sim> set DRC 180K
sim> set DRC trackprot=8
sim> attach DRC0 scratch.U0.2770.disc
sim> deposit S 002611
sim> go
H1 CONFIGURATION COMPLETE
H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED,
H70 ENTER PROGRAM OPTIONS IN SWITCH REGISTER, PUSH RUN
HALT instruction 107077
sim> deposit S 010000
sim> go
TEST REPORT: H12 DEVICE HAS 90 SECTORS
H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN
HALT instruction 102002
sim> set DRC unprotected
sim> go
H10 SET TRACK PROTECT SWITCH TO PROTECTED,PRESS RUN
HALT instruction 102002
sim> set DRC protected
sim> go
H14 DEVICE HAS 0032 TRACKS,THE FOLLOWING ARE PROTECTED:
H63 0000 TO 0007
H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN
HALT instruction 102002
sim> set DRC unprotected
sim> go
H36 PASS 0001
HALT instruction 102077
TEST RESULT: Passed.
---------------------------------------------------------------
DSN 177777 - HP 2100 Fixed Head Disc/Drum Diagnostic (2771-001)
---------------------------------------------------------------
TESTED DEVICE: DR (hp2100_dr.c)
BINARY TAPE: 22682-16017 Rev. 1612
CONFIGURATION: sim> reset
sim> go 100
H0 2100 SERIES FIXED HEAD DISC/DRUM DIAGNOSTIC
ENTER SELECT CODES, CHANNELS IN SWITCH REGISTER,PUSH RUN
HALT instruction 107001
sim> set DRC 720K
sim> set DRC trackprot=32
sim> attach DRC0 scratch.U0.2771.disc
sim> deposit S 002611
sim> go
H1 CONFIGURATION COMPLETE
H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED,
H70 ENTER PROGRAM OPTIONS IN SWITCH REGISTER, PUSH RUN
HALT instruction 107077
sim> deposit S 010000
sim> go
TEST REPORT: H12 DEVICE HAS 90 SECTORS
H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN
HALT instruction 102002
sim> set DRC unprotected
sim> go
H10 SET TRACK PROTECT SWITCH TO PROTECTED,PRESS RUN
HALT instruction 102002
sim> set DRC protected
sim> go
H14 DEVICE HAS 0128 TRACKS,THE FOLLOWING ARE PROTECTED:
H63 0000 TO 0031
H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN
HALT instruction 102002
sim> set DRC unprotected
sim> go
H36 PASS 0001
HALT instruction 102077
TEST RESULT: Passed.
-----------------------------------------------------------
DSN 177777 - HP 2100 Fixed Head Disc/Drum Diagnostic (2773)
-----------------------------------------------------------
TESTED DEVICE: DR (hp2100_dr.c)
BINARY TAPE: 22682-16017 Rev. 1612
CONFIGURATION: sim> reset
sim> go 100
H0 2100 SERIES FIXED HEAD DISC/DRUM DIAGNOSTIC
ENTER SELECT CODES, CHANNELS IN SWITCH REGISTER,PUSH RUN
HALT instruction 107001
sim> set DRC 384K
sim> set DRC trackprot=16
sim> attach DRC0 scratch.U0.2773.disc
sim> deposit S 002611
sim> go
H1 CONFIGURATION COMPLETE
H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED,
H70 ENTER PROGRAM OPTIONS IN SWITCH REGISTER, PUSH RUN
HALT instruction 107077
sim> deposit S 010000
sim> go
TEST REPORT: H12 DEVICE HAS 32 SECTORS
H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN
HALT instruction 102002
sim> set DRC unprotected
sim> go
H10 SET TRACK PROTECT SWITCH TO PROTECTED,PRESS RUN
HALT instruction 102002
sim> set DRC protected
sim> go
H14 DEVICE HAS 0192 TRACKS,THE FOLLOWING ARE PROTECTED:
H63 0000 TO 0015
H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN
HALT instruction 102002
sim> set DRC unprotected
sim> go
H36 PASS 0001
HALT instruction 102077
TEST RESULT: Passed.
-----------------------------------------------------------
DSN 177777 - HP 2100 Fixed Head Disc/Drum Diagnostic (2775)
-----------------------------------------------------------
TESTED DEVICE: DR (hp2100_dr.c)
BINARY TAPE: 22682-16017 Rev. 1612
CONFIGURATION: sim> reset
sim> go 100
H0 2100 SERIES FIXED HEAD DISC/DRUM DIAGNOSTIC
ENTER SELECT CODES, CHANNELS IN SWITCH REGISTER,PUSH RUN
HALT instruction 107001
sim> set DRC 1536K
sim> set DRC trackprot=64
sim> attach DRC0 scratch.U0.2775.disc
sim> deposit S 002611
sim> go
H1 CONFIGURATION COMPLETE
H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED,
H70 ENTER PROGRAM OPTIONS IN SWITCH REGISTER, PUSH RUN
HALT instruction 107077
sim> deposit S 010000
sim> go
TEST REPORT: H12 DEVICE HAS 32 SECTORS
H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN
HALT instruction 102002
sim> set DRC unprotected
sim> go
H10 SET TRACK PROTECT SWITCH TO PROTECTED,PRESS RUN
HALT instruction 102002
sim> set DRC protected
sim> go
H14 DEVICE HAS 0768 TRACKS,THE FOLLOWING ARE PROTECTED:
H63 0000 TO 0063
H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN
HALT instruction 102002
sim> set DRC unprotected
sim> go
H36 PASS 0001
HALT instruction 102077
TEST RESULT: Passed.
-----------------------------------------------
DSN (none) - 12875 Processor Interconnect Cable
-----------------------------------------------
TESTED DEVICE: IPLI, IPLO (hp2100_ipl.c)
BINARY TAPE: 24197-60001 Rev. B
CONFIGURATION: sim> set IPLI DIAG
sim> set IPLO DIAG
sim> deposit S 003332
sim> reset
sim> go 2
HALT instruction 107076
sim> deposit S 010000
sim> reset
sim> go
HALT instruction 107077
sim> deposit S 000000
sim> reset
sim> go 100
TEST REPORT: H14. START 12875 CABLE DIAGNOSTIC
H77. END 12875 CABLE DIAGNOSTIC
HALT instruction 102077
TEST RESULT: Passed.
-----------------------------------------------------------------
DSN (none) - HP2100A Cartridge Disc Memory (2871) (multiple unit)
-----------------------------------------------------------------
TESTED DEVICE: DP (hp2100_dp.c)
BINARY TAPE: 24203-60001 Rev. A
CONFIGURATION: sim> set DPC 12557A
sim> attach DPC0 scratch.U0.2871.disc
sim> attach DPC1 scratch.U1.2871.disc
sim> attach DPC2 scratch.U2.2871.disc
sim> attach DPC3 scratch.U3.2871.disc
sim> deposit S 002211
sim> reset
sim> go 2
HALT instruction 107077
sim> deposit S 000400
sim> reset
sim> go 100
H0 HP2100A CARTRIDGE DISC MEMORY DIAGNOSTIC
H34 ENTER UNIT NUMBERS(0-3)SEPARATED BY COMMAS
0,1,2,3
H33 RESET SWITCH 8
HALT instruction 102002
sim> deposit S 000004
sim> go
H24 CYLINDER TABLE
000,001,002,004,008,016,032,064,128,202
H25 WISH TO ALTER TABLE?
NO
H27 PATTERN TABLE
000000 177777 125252 052525 007417
170360 162745 163346 155555 022222
H25 WISH TO ALTER TABLE?
NO
H62 TYPE A FOR HEADS 0,1;B FOR 2,3;C FOR ALTERNATELY 0,1 THEN 2,3
C
H32 RESET SWITCH 2
HALT instruction 102002
sim> deposit S 000000
sim> reset
sim> go 100
TEST REPORT: H0 HP2100A CARTRIDGE DISC MEMORY DIAGNOSTIC
H65 PASS 0001
H65 PASS 0002
H65 PASS 0003
H65 PASS 0004
[CTRL+E]
Simulation stopped
TEST RESULT: Passed.
TEST NOTES: Four passes are required to test all head/unit combinations.
--------------------------------------------------------------------
DSN (none) - HP2100A Cartridge Disc Memory (2871) (user interaction)
--------------------------------------------------------------------
TESTED DEVICE: DP (hp2100_dp.c)
BINARY TAPE: 24203-60001 Rev. A
CONFIGURATION: sim> set DPC 12557A
sim> attach DPC0 scratch.U0.2871.disc
sim> deposit S 002211
sim> reset
sim> go 2
HALT instruction 107077
sim> deposit S 010020
sim> reset
sim> go 100
TEST REPORT: H0 HP2100A CARTRIDGE DISC MEMORY DIAGNOSTIC
H66 SET OVERRIDE SWITCH,PUSH RUN
HALT instruction 102002
sim> go
H37 READ AFTER WRITE ADDRESS IN S0
E64 STATUS IS 000000 SHOULD BE 000010
H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00
HALT instruction 102001
sim> go
H22 CYCLIC CHECK IN S0
E64 STATUS IS 000000 SHOULD BE 000010
H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00
HALT instruction 102001
sim> go
H67 CLEAR OVERRIDE SWITCH,PUSH RUN
HALT instruction 102002
sim> go
H41 READ DEFECTIVE TRACK IN S0
E64 STATUS IS 000000 SHOULD BE 000031
H51 CYL 0001 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00
HALT instruction 102001
sim> go
H42 WRITE PROTECTED TRACK IN S0
E64 STATUS IS 000000 SHOULD BE 000011
H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00
HALT instruction 102001
sim> go
H36 WRITE ADDRESS IN S0
E64 STATUS IS 000000 SHOULD BE 000011
H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 3072 UNIT 00
HALT instruction 102001
sim> go
H66 SET OVERRIDE SWITCH,PUSH RUN
HALT instruction 102002
sim> go
H67 CLEAR OVERRIDE SWITCH,PUSH RUN
HALT instruction 102002
sim> go
H70 UNLOCK UNIT 0,PUSH RUN
HALT instruction 102002
sim> set DPC0 unloaded
sim> go
H40 READY UNIT 0
[CTRL+E]
Simulation stopped
sim> set DPC0 loaded
sim> go
H71 PRESS PRESET THEN PRESS RUN
HALT instruction 102002
sim> deposit S 000140
sim> reset
sim> go
H65 PASS 0001
TEST RESULT: Partially passed.
TEST NOTES: Step 0 tests the the defective and protected cylinder bits and
the FORMAT OVERRIDE switch. These features are not simulated.
ONLINE DIAGNOSTIC DETAILED EXECUTION AND RESULTS
================================================
Online diagnostics were run under the control of the indicated operating
systems. Unless otherwise noted, the programs were loaded with the default
configuration specified by the associated linker command file or the operating
system.
--------------------------------------------------
VISOD - Vector Instruction Set Firmware Diagnostic
--------------------------------------------------
TESTED DEVICE: CPU (hp2100_cpu7.c)
BINARY FILE: 12824-16002 Rev. 2026
HOST SYSTEM: RTE-IVB Rev. 5010
CONFIGURATION: sim> set CPU 1000-F
sim> set CPU VIS
sim> go
TEST REPORT: VIS ON-LINE DIAGNOSTIC SUCCESSFUL COMPLETION
TEST RESULT: Passed.
------------------------------
DIAG - ICD/MAC Disc Diagnostic
------------------------------
TESTED DEVICE: DA (hp2100_di.c, hp2100_di_da.c)
BINARY FILE: 91711-12032 Rev. 2201
HOST SYSTEM: RTE-IVB Rev. 5010
CONFIGURATION: sim> set DA1 7906H
sim> set DA1 FORMAT
sim> attach DA1 scratch.U1.7906H.disc
sim> go
TEST REPORT: DIAG : HP-IB DISC DIAGNOSTIC
DIAG : CAUTION: DATA COULD BE DESTROYED ON THE DISC TESTED.
DIAG : REMOVABLE MEDIA SHOULD BE REPLACED.
DIAG : List LU (0 for none) ? 0
DIAG : Do you want to trace disc operations ? YES
DIAG : Start trace at what step ? 0
DIAG : Trace operations which are not part of the test steps ? NO
DIAG : Stop after first failure ? NO
DIAG : Disc LU ? 14
DIAG : Disc address ? 1
DIAG : Drive model number ? 06
DIAG : Do you want to run the interactive part of the test ? YES
DIAG : LU 14 address 1 select code 12 7906 drive
DIAG : CHECK THAT ALL SWITCHES ARE SET CORRECTLY.
DIAG : THE RUN/STOP SWITCH SHOULD BE IN THE RUN POSITION.
DIAG : THE FORMAT SWITCH SHOULD BE ON.
DIAG : THE PROTECT/READ ONLY SWITCH SHOULD BE OFF.
DIAG : Type <space>,<return>
DIAG : Beginning part 1 of diagnostic.
DIAG : operation parameters/results spd cs ds DSJ
DIAG : WRITE LOOPBACK REC length 10
DIAG : READ LOOPBACK REC length 8
DIAG : test data read test passed
DIAG : STEP 0 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : INITIATE SELF TEST
DIAG : RETURN DSJ 2
DIAG : RTN SELF-TEST RES result 0
DIAG : RETURN DSJ 2
DIAG : STEP 1 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : REQUEST STATUS drive type 0 0 0 40 0
DIAG : IDENTIFY result 3 0 0 40 0
DIAG : STEP 3 PASSED
DIAG : Part 1 of diagnostic completed.
DIAG : Information for test track selection.
DIAG : Drive address limits:
DIAG : cylinders: 0 - 410 heads: 0 - 3 sectors: 0 - 47
DIAG : First and last tracks on LU:
DIAG : cylinder 0 head 0 (track 0)
DIAG : cylinder 49 head 1 (track 99)
DIAG : First and last spares on LU:
DIAG : cylinder 50 head 0
DIAG : cylinder 49 head 1 (track 99)
DIAG : Heads on LU (first - last): 0 - 1
DIAG : Searching entire LU for file directory:
DIAG : NO DIRECTORY OR UNABLE TO READ DIRECTORY ON TEST LU
DIAG : First and last tracks available for testing:
DIAG : cylinder 0 head 0 (track 0)
DIAG : cylinder 49 head 1 (track 99)
DIAG : Default test tracks:
DIAG : cylinder 49 head 0 (track 98)
DIAG : cylinder 49 head 1 (track 99)
DIAG : Use default test tracks ? YES
DIAG : Checking test track preambles.
DIAG : Test track preambles are OK.
DIAG : Beginning part 2 of diagnostic.
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : STEP 4 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : REQUEST DISC ADDR cy 49 hd 0 sec 0 0 0 40 0
DIAG : STEP 5 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : RECALIBRATE 0
DIAG : REQUEST STATUS drive type 0 0 37 40 0
DIAG : STEP 6 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : REQUEST SECTOR ADDR sec 6 0 0 40 0
DIAG : STEP 7 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : CLEAR (OPCODE)
DIAG : RETURN DSJ 2
DIAG : RETURN DSJ 2
DIAG : REQUEST STATUS drive type 0 0 0 40 0
DIAG : STEP 8 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : READ FULL SECTOR length 138 0 0 40 0
DIAG : decode preamble cy 49 hd 0 sec 0 spd 0
DIAG : STEP 9 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : WRITE FULL SECTOR length 138 0 0 40 0
DIAG : STEP 10 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : VERIFY sector count 1 0 0 40 0
DIAG : STEP 11 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : READ length 128 0 0 40 0
DIAG : STEP 12 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : READ WITH OFFSET length 128 offset 55 0 0 40 0
DIAG : STEP 13 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : READ WITHOUT VERIFY length 128 0 0 40 0
DIAG : STEP 14 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SET FILE MASK mask 0 0 0 40 0
DIAG : SEEK cy 49 hd 0 sec 47 0 37 40 0
DIAG : READ FULL SECTOR length 140 0 14 40 1
DIAG : STEP 16 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SET FILE MASK mask 2 0 0 40 0
DIAG : SEEK cy 49 hd 0 sec 47 0 37 40 0
DIAG : READ FULL SECTOR length 140 0 0 40 0
DIAG : STEP 17 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SET FILE MASK mask 2 0 0 40 0
DIAG : SEEK cy 49 hd 3 sec 47 0 37 40 0
DIAG : READ FULL SECTOR length 140 0 14 40 1
DIAG : STEP 18 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SET FILE MASK mask 3 0 0 40 0
DIAG : SEEK cy 49 hd 3 sec 47 0 37 40 0
DIAG : READ FULL SECTOR length 140 0 0 40 0
DIAG : REQUEST DISC ADDR cy 50 hd 0 sec 1 0 0 40 0
DIAG : STEP 19 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SET FILE MASK mask 11 0 0 40 0
DIAG : SEEK cy 49 hd 0 sec 47 0 37 40 0
DIAG : READ FULL SECTOR length 140 0 0 40 0
DIAG : REQUEST DISC ADDR cy 48 hd 0 sec 1 0 0 40 0
DIAG : STEP 20 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : ADDRESS RECORD cy 49 hd 1 sec 0 0 0 40 0
DIAG : INITIALIZE length 6144 spd 1 1 0 40 0
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : READ FULL SECTOR length 3 0 0 40 0
DIAG : decode preamble cy 49 hd 0 sec 0 spd 0
DIAG : STEP 21 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : ADDRESS RECORD cy 49 hd 0 sec 0 0 0 40 0
DIAG : INITIALIZE length 6144 spd 4 4 0 40 0
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : READ FULL SECTOR length 3 0 0 40 0
DIAG : decode preamble cy 49 hd 1 sec 0 spd 0
DIAG : STEP 22 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : ADDRESS RECORD cy 49 hd 1 sec 0 0 0 40 0
DIAG : INITIALIZE length 6144 spd 2 2 0 40 0
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : READ FULL SECTOR length 3 0 0 40 0
DIAG : decode preamble cy 49 hd 1 sec 0 spd 0
DIAG : STEP 25 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : ADDRESS RECORD cy 49 hd 0 sec 0 0 0 40 0
DIAG : INITIALIZE length 6144 spd 6 6 0 40 0
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : READ FULL SECTOR length 3 0 0 40 0
DIAG : decode preamble cy 49 hd 1 sec 0 spd 0
DIAG : STEP 26 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : ADDRESS RECORD cy 49 hd 1 sec 0 0 0 40 0
DIAG : INITIALIZE length 6144 spd 3 3 0 40 0
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : READ FULL SECTOR length 3 0 0 40 0
DIAG : decode preamble cy 49 hd 1 sec 0 spd 0
DIAG : STEP 28 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : ADDRESS RECORD cy 49 hd 0 sec 0 0 0 40 0
DIAG : INITIALIZE length 6144 spd 4 4 0 40 0
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : READ FULL SECTOR length 3 0 0 40 0
DIAG : decode preamble cy 49 hd 1 sec 0 spd 0
DIAG : STEP 30 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : ADDRESS RECORD cy 49 hd 0 sec 0 0 0 40 0
DIAG : INITIALIZE length 6144 spd 0 0 0 40 0
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : READ FULL SECTOR length 3 0 0 40 0
DIAG : decode preamble cy 49 hd 0 sec 0 spd 0
DIAG : SET FILE MASK mask 0 0 0 40 0
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : READ length 128 0 0 40 0
DIAG : STEP 31 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : ADDRESS RECORD cy 49 hd 1 sec 0 0 0 40 0
DIAG : INITIALIZE length 6144 spd 0 0 0 40 0
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : READ FULL SECTOR length 3 0 0 40 0
DIAG : decode preamble cy 49 hd 1 sec 0 spd 0
DIAG : SET FILE MASK mask 0 0 0 40 0
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : READ length 128 0 0 40 0
DIAG : STEP 32 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : WRITE length 128 0 0 40 0
DIAG : STEP 35 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : READ length 128 0 0 40 0
DIAG : test data read test passed
DIAG : STEP 36 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 1 hd 0 sec 0 0 37 40 0
DIAG : REQUEST DISC ADDR cy 1 hd 0 sec 0 0 0 40 0
DIAG : SEEK cy 2 hd 0 sec 0 0 37 40 0
DIAG : REQUEST DISC ADDR cy 2 hd 0 sec 0 0 0 40 0
DIAG : SEEK cy 4 hd 0 sec 0 0 37 40 0
DIAG : REQUEST DISC ADDR cy 4 hd 0 sec 0 0 0 40 0
DIAG : SEEK cy 8 hd 0 sec 0 0 37 40 0
DIAG : REQUEST DISC ADDR cy 8 hd 0 sec 0 0 0 40 0
DIAG : SEEK cy 16 hd 0 sec 0 0 37 40 0
DIAG : REQUEST DISC ADDR cy 16 hd 0 sec 0 0 0 40 0
DIAG : SEEK cy 32 hd 0 sec 0 0 37 40 0
DIAG : REQUEST DISC ADDR cy 32 hd 0 sec 0 0 0 40 0
DIAG : SEEK cy 64 hd 0 sec 0 0 37 40 0
DIAG : REQUEST DISC ADDR cy 64 hd 0 sec 0 0 0 40 0
DIAG : SEEK cy 128 hd 0 sec 0 0 37 40 0
DIAG : REQUEST DISC ADDR cy 128 hd 0 sec 0 0 0 40 0
DIAG : SEEK cy 256 hd 0 sec 0 0 37 40 0
DIAG : REQUEST DISC ADDR cy 256 hd 0 sec 0 0 0 40 0
DIAG : SEEK cy 410 hd 0 sec 0 0 37 40 0
DIAG : REQUEST DISC ADDR cy 410 hd 0 sec 0 0 0 40 0
DIAG : STEP 40 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : VERIFY sector count 1 0 0 40 0
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : VERIFY sector count 2 0 0 40 0
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : VERIFY sector count 4 0 0 40 0
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : VERIFY sector count 8 0 0 40 0
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : VERIFY sector count 16 0 0 40 0
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : VERIFY sector count 32 0 0 40 0
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : VERIFY sector count 48 0 0 40 0
DIAG : STEP 45 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : secondary HP-IB value 162
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : secondary HP-IB value 163
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : secondary HP-IB value 164
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : secondary HP-IB value 165
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : secondary HP-IB value 166
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : secondary HP-IB value 167
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : secondary HP-IB value 170
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : secondary HP-IB value 171
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : secondary HP-IB value 172
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : secondary HP-IB value 173
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : secondary HP-IB value 174
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : secondary HP-IB value 175
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : STEP 49 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : opcode HP-IB value 1
DIAG : REQUEST STATUS drive type 0 0 37 40 0
DIAG : opcode HP-IB value 15
DIAG : REQUEST STATUS drive type 0 0 1 40 0
DIAG : opcode HP-IB value 26
DIAG : REQUEST STATUS drive type 0 0 1 40 0
DIAG : STEP 50 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : ADDRESS RECORD cy 48 hd 1 sec 0 0 0 40 0
DIAG : INITIALIZE length 6144 spd 0 0 0 40 0
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : READ FULL SECTOR length 3 0 0 40 0
DIAG : decode preamble cy 49 hd 1 sec 0 spd 0
DIAG : STEP 52 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : ADDRESS RECORD cy 49 hd 0 sec 0 0 0 40 0
DIAG : INITIALIZE length 6144 spd 0 0 0 40 0
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : READ FULL SECTOR length 3 0 0 40 0
DIAG : decode preamble cy 49 hd 1 sec 0 spd 0
DIAG : STEP 54 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : ADDRESS RECORD cy 49 hd 1 sec 0 0 0 40 0
DIAG : INITIALIZE length 6144 spd 0 0 0 40 0
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : READ FULL SECTOR length 3 0 0 40 0
DIAG : decode preamble cy 49 hd 1 sec 0 spd 0
DIAG : SET FILE MASK mask 0 0 0 40 0
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : READ length 128 0 0 40 0
DIAG : SEEK cy 49 hd 1 sec 5 0 37 40 0
DIAG : READ FULL SECTOR length 138 0 0 40 0
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : WRITE FULL SECTOR length 138 0 0 40 0
DIAG : SEEK cy 49 hd 1 sec 1 0 37 40 0
DIAG : READ length 128 0 0 40 0
DIAG : STEP 55 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : read without SRD
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : STEP 56 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SWD without write
DIAG : REQUEST STATUS drive type 0 0 12 40 0
DIAG : STEP 57 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SET FILE MASK mask 3 0 0 40 0
DIAG : SEEK cy 410 hd 3 sec 47 0 37 40 0
DIAG : READ FULL SECTOR length 140 0 14 44 1
DIAG : STEP 59 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SET FILE MASK mask 11 0 0 44 0
DIAG : SEEK cy 0 hd 3 sec 47 0 37 40 0
DIAG : READ FULL SECTOR length 140 0 14 44 1
DIAG : STEP 60 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 4 sec 0 0 23 44 1
DIAG : SEEK cy 0 hd 0 sec 0 0 37 40 0
DIAG : STEP 72 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 411 hd 1 sec 0 0 23 44 1
DIAG : SEEK cy 0 hd 0 sec 0 0 37 40 0
DIAG : STEP 73 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 49 0 23 44 1
DIAG : SEEK cy 0 hd 0 sec 0 0 37 40 0
DIAG : STEP 74 PASSED
DIAG : Part 2 of diagnostic completed.
DIAG : Beginning part 3 of diagnostic (interactive).
DIAG : PUT RUN/STOP SWITCH IN STOP POSITION
DIAG : Type <space>,<return>
DIAG : operation parameters/results spd cs ds DSJ
DIAG : REQUEST STATUS drive type 0 0 37 243 0
DIAG : STEP 80 PASSED
DIAG : PUT RUN/STOP SWITCH IN RUN POSITION
DIAG : Type <space>,<return>
DIAG : WAITING FOR THE DRIVE TO BE READY
DIAG : operation parameters/results spd cs ds DSJ
DIAG : RETURN DSJ 0
DIAG : REQUEST STATUS drive type 0 0 0 50 0
DIAG : STEP 81 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : ADDRESS RECORD cy 49 hd 1 sec 0 0 0 40 0
DIAG : INITIALIZE length 6144 spd 2 2 0 40 0
DIAG : SEEK cy 49 hd 1 sec 0 0 37 40 0
DIAG : READ FULL SECTOR length 3 0 0 40 0
DIAG : decode preamble cy 49 hd 1 sec 0 spd 0
DIAG : STEP 82 FAILED
DIAG : TURN OFF FORMAT SWITCH
DIAG : Type <space>,<return>
DIAG : operation parameters/results spd cs ds DSJ
DIAG : REQUEST STATUS drive type 0 0 0 0 0
DIAG : STEP 83 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 0 0
DIAG : WRITE length 1 0 0 0 0
DIAG : STEP 84 FAILED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 0 0
DIAG : WRITE FULL SECTOR length 1 0 23 0 1
DIAG : STEP 85 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 1 sec 0 0 37 0 0
DIAG : INITIALIZE length 1 spd 0 0 23 0 1
DIAG : STEP 86 PASSED
DIAG : TURN ON FORMAT SWITCH
DIAG : Type <space>,<return>
DIAG : operation parameters/results spd cs ds DSJ
DIAG : REQUEST STATUS drive type 0 0 0 40 0
DIAG : STEP 87 PASSED
DIAG : TURN ON UPPER PLATTER PROTECT SWITCH
DIAG : Type <space>,<return>
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 140 0
DIAG : STEP 89 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 140 0
DIAG : WRITE length 1 0 23 140 1
DIAG : STEP 90 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 140 0
DIAG : WRITE FULL SECTOR length 1 0 23 140 1
DIAG : STEP 91 PASSED
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 140 0
DIAG : INITIALIZE length 1 spd 0 0 23 140 1
DIAG : STEP 92 PASSED
DIAG : TURN OFF PROTECT READ ONLY SWITCH
DIAG : Type <space>,<return>
DIAG : operation parameters/results spd cs ds DSJ
DIAG : SEEK cy 49 hd 0 sec 0 0 37 40 0
DIAG : STEP 97 PASSED
DIAG : Part 3 of diagnostic completed.
DIAG : Cleaning up.
DIAG : DIAGNOSTIC TERMINATED. 15 FAILURES DETECTED.
TEST RESULT: Partially passed.
TEST NOTES: Steps 11-14 test CRC generation and checking. Steps 21 and 28
test the defective cylinder bit. Steps 22 and 26 test the spare
cylinder bit. Steps 25, 82, and 84 test the protected cylinder
bit. Step 30 tests track sparing. Steps 52, 54, and 55 test
cylinder, head, and sector miscompares by writing incorrect
preambles. These features are not simulated.
------------------------------------------------
#EMA - Extended Memory Array Firmware Diagnostic
------------------------------------------------
TESTED DEVICE: CPU (hp2100_cpu5.c)
BINARY FILE: 92067-16013 Rev. 1805
HOST SYSTEM: RTE-IVB Rev. 5010
CONFIGURATION: sim> set CPU EMA
sim> go
TEST REPORT: EMA ON-LINE DIAGNOSTIC SUCCESSFUL COMPLETION
TEST RESULT: Passed.
--------------------------------------------------
VISOD - Vector Instruction Set Firmware Diagnostic
--------------------------------------------------
TESTED DEVICE: CPU (hp2100_cpu7.c)
BINARY FILE: 12829-16006 Rev. 2226
HOST SYSTEM: RTE-6/VM Rev. 6200
CONFIGURATION: sim> set CPU 1000-F
sim> set CPU VIS
sim> go
TEST REPORT: VIS ON-LINE DIAGNOSTIC SUCCESSFUL COMPLETION
TEST RESULT: Passed.
------------------------------------------------
VMACK - Virtual Memory Array Firmware Diagnostic
------------------------------------------------
TESTED DEVICE: CPU (hp2100_cpu5.c)
BINARY FILE: 92084-16423 Rev. 2121
HOST SYSTEM: RTE-6/VM Rev. 6200
CONFIGURATION: sim> set CPU 1000-F
sim> set CPU VMA
sim> go
TEST REPORT: VMACK - VMA FIRMWARE DIAGNOSTIC, FIRMWARE REV# 003
VMACK - .IMAR NO ERRORS DETECTED PASS# 1
VMACK - .JMAR NO ERRORS DETECTED PASS# 1
VMACK - .LBP NO ERRORS DETECTED PASS# 1
VMACK - .LBPR NO ERRORS DETECTED PASS# 1
VMACK - .LPX NO ERRORS DETECTED PASS# 1
VMACK - .LPXR NO ERRORS DETECTED PASS# 1
VMACK - .PMAP NO ERRORS DETECTED PASS# 1
VMACK - .IMAP NO ERRORS DETECTED PASS# 1
VMACK - .JMAP NO ERRORS DETECTED PASS# 1
TEST RESULT: Passed.
---------------------------------------
SDIAG - SIGNAL/1000 Firmware Diagnostic
---------------------------------------
TESTED DEVICE: CPU (hp2100_cpu7.c)
BINARY FILE: 92835-16006 Rev. 2040
HOST SYSTEM: RTE-6/VM Rev. 6200
CONFIGURATION: sim> set CPU 1000-F
sim> set CPU VIS
sim> set CPU SIGNAL
sim> go
TEST REPORT: SIGNAL/1000 FIRMWARE DIAGNOSTIC
SIGNAL/1000 FIRMWARE DIAGNOSTIC SUCCESSFUL COMPLETION
TEST RESULT: Passed.