sim_rev.h

/* sim_rev.h: simulator revisions and current rev level

   Copyright (c) 1993-2004, Robert M Supnik

   Permission is hereby granted, free of charge, to any person obtaining a
   copy of this software and associated documentation files (the "Software"),
   to deal in the Software without restriction, including without limitation
   the rights to use, copy, modify, merge, publish, distribute, sublicense,
   and/or sell copies of the Software, and to permit persons to whom the
   Software is furnished to do so, subject to the following conditions:

   The above copyright notice and this permission notice shall be included in
   all copies or substantial portions of the Software.

   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
   IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
   ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
   IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
   CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

   Except as contained in this notice, the name of Robert M Supnik shall not
   be used in advertising or otherwise to promote the sale, use or other dealings
   in this Software without prior written authorization from Robert M Supnik.
*/

#ifndef _SIM_REV_H_
#define _SIM_REV_H_	0

#define	SIM_MAJOR	3
#define SIM_MINOR	2
#define SIM_PATCH	3

/* V3.2 revision history 

patch	date		module(s) and fix(es)

  3	03-Sep-04	scp.c:
			- added ECHO command (from Dave Bryan)
			- qualified RESTORE detach with SIM_SW_REST

			sim_console: added OS/2 EMX fixes (from Holger Veit)

			sim_sock.h: added missing definition for OS/2 (from Holger Veit)

			hp2100_cpu.c: changed error stops to report PC not PC + 1
			(from Dave Bryan)

			hp2100_dp.c: functional and timing fixes (from Dave Bryan)
			- controller sets ATN for all commands except read status
			- controller resumes polling for ATN interrupts after read status
			- check status on unattached drive set busy and not ready
			- check status tests wrong unit for write protect status
			- drive on line sets ATN, will set FLG if polling

			hp2100_dr.c: fixed CLC to stop operation (from Dave Bryan)

			hp2100_ms.c: functional and timing fixes (from Dave Bryan)
			- fixed erroneous execution of rejected command
			- fixed erroneous execution of select-only command
			- fixed erroneous execution of clear command
			- fixed odd byte handling for read
			- fixed spurious odd byte status on 13183A EOF
			- modified handling of end of medium
			- added detailed timing, with fast and realistic modes
			- added reel sizes to simulate end of tape
			- added debug printouts

			hp2100_mt.c: modified handling of end of medium (from Dave Bryan)

			hp2100_stddev.c: added tab to control char set (from Dave Bryan)

			pdp11_rq.c: VAX controllers luns start at 0 (from Andreas Cejna)

			vax_cpu.c: fixed bug in EMODD/G, second word of quad dst not probed

  2	17-Jul-04	scp.c: fixed problem ATTACHing to read only files
			(found by John Dundas)

			sim_console.c: revised Windows console code (from Dave Bryan)

			sim_fio.c: fixed problem in big-endian read
			(reported by Scott Bailey)

			gri_cpu.c: updated MSR, EAO functions

			hp_stddev.c: generalized handling of control char echoing
			(from Dave Bryan)

			vax_sys.c: fixed bad block initialization routine

  1	10-Jul-04	scp.c: added SET/SHOW CONSOLE subhierarchy

			hp2100_cpu.c: fixes and added features (from Dave Bryan)
			- SBT increments B after store
			- DMS console map must check dms_enb
			- SFS x,C and SFC x,C work
			- MP violation clears automatically on interrupt
			- SFS/SFC 5 is not gated by protection enabled
			- DMS enable does not disable mem prot checks
			- DMS status inconsistent at simulator halt
			- Examine/deposit are checking wrong addresses
			- Physical addresses are 20b not 15b
			- Revised DMS to use memory rather than internal format
			- Added instruction printout to HALT message
			- Added M and T internal registers
			- Added N, S, and U breakpoints
			Revised IBL facility to conform to microcode
			Added DMA EDT I/O pseudo-opcode
			Separated DMA SRQ (service request) from FLG

			all HP2100 peripherals:
			- revised to make SFS x,C and SFC x,C work
			- revised to separate SRQ from FLG

			all HP2100 IBL bootable peripherals:
			- revised boot ROMs to use IBL facility
			- revised SR values to preserve SR<5:3>

			hp2100_lps.c, hp2100_lpt.c: fixed timing
			
			hp2100_dp.c: fixed interpretation of SR<0>

			hp2100_dr.c: revised boot code to use IBL algorithm

			hp2100_mt.c, hp2100_ms.c: fixed spurious timing error after CLC
			 (found by Dave Bryan)

			hp2100_stddev.c:
			- fixed input behavior during typeout for RTE-IV
			- suppressed nulls on TTY output for RTE-IV

			hp2100_sys.c: added SFS x,C and SFC x,C to print/parse routines

			pdp10_fe.c, pdp11_stddev.c, pdp18b_stddev.c, pdp8_tt.c, vax_stddev.c:
			- removed SET TTI CTRL-C option

			pdp11_tq.c:
			- fixed bug in reporting write protect (reported by Lyle Bickley)
			- fixed TK70 model number and media ID (found by Robert Schaffrath)

			pdp11_vh.c: added DHQ11 support (from John Dundas)

			pdp11_io.c, vax_io.c: fixed DHQ11 autoconfigure (from John Dundas)

			pdp11_sys.c, vax_sys.c: added DHQ11 support (from John Dundas)

			vax_cpu.c: fixed bug in DIVBx, DIVWx (reported by Peter Trimmel)

  0	04-Apr-04	scp.c:
			- added sim_vm_parse_addr and sim_vm_fprint_addr
			- added REG_VMAD
			- moved console logging to SCP
			- changed sim_fsize to use descriptor rather than name
			- added global device/unit show modifiers
			- added device debug support (Dave Hittner)
			- moved device and unit flags, updated save format

			sim_ether.c:
			- further generalizations (Dave Hittner, Mark Pizzolato)

			sim_tmxr.h, sim_tmxr.c:
			- added tmxr_linemsg
			- changed TMXR definition to support variable number of lines

			sim_libraries:
			- new console library (sim_console.h, sim_console.c)
			- new file I/O library (sim_fio.h, sim_fio.c)
			- new timer library (sim_timer.h, sim_timer.c)

			all terminal multiplexors: revised for tmxr library changes

			all DECtapes:
			- added STOP_EOR to enable end-of-reel stop
			- revised for device debug support

			all variable-sized devices: revised for sim_fsize change

			eclipse_cpu.c, nova_cpu.c: fixed device enable/disable support
			   (found by Bruce Ray)

			nova_defs.h, nova_sys.c, nova_qty.c:
			- added QTY and ALM support (Bruce Ray)

			id32_cpu.c, id_dp.c: revised for device debug support

			lgp: added LGP-30 [LGP-21] simulator

			pdp1_sys.c: fixed bug in LOAD (found by Mark Crispin)

			pdp10_mdfp.c:
			- fixed bug in floating unpack
			- fixed bug in FIXR (found by Philip Stone, fixed by Chris Smith)

			pdp11_dz.c: added per-line logging

			pdp11_rk.c:
			- added formatting support
			- added address increment inhibit support
			- added transfer overrun detection

			pdp11_hk.c, pdp11_rp.c: revised for device debug support

			pdp11_rq.c: fixed bug in interrupt control (found by Tom Evans)

			pdp11_ry.c: added VAX support

			pdp11_tm.c, pdp11_tq.c, pdp11_ts.c: revised for device debug support

			pdp11_xu.c: replaced stub with real implementation (Dave Hittner)

			pdp18b_cpu.c:
			- fixed bug in XVM g_mode implementation
			- fixed bug in PDP-15 indexed address calculation
			- fixed bug in PDP-15 autoindexed address calculation

			pdp18b_fpp.c: fixed bugs in instruction decode

			pdp18b_stddev.c:
			- fixed clock response to CAF
			- fixed bug in hardware read-in mode bootstrap

			pdp18b_sys.c: fixed XVM instruction decoding errors

			pdp18b_tt1.c: added support for 1-16 additional terminals

			vax_moddef.h, vax_cpu.c, vax_sysdev.c:
			- added extended physical memory support (Mark Pizzolato)
			- added RXV21 support

			vax_cpu1.c:
			- added PC read fault in EXTxV
			- fixed PC write fault in INSV

/* V3.1 revision history

  0	29-Dec-03	sim_defs.h, scp.c: added output stall status

			all console emulators: added output stall support

			sim_ether.c (Dave Hittner, Mark Pizzolato, Anders Ahgren):
			- added Alpha/VMS support
			- added FreeBSD, Mac OS/X support
			- added TUN/TAP support
			- added DECnet duplicate address detection

			all memory buffered devices (fixed head disks, floppy disks):
			- cleaned up buffer copy code

			all DECtapes:
			- fixed reverse checksum in read all
			- added DECtape off reel message
			- simplified timing

			eclipse_cpu.c (Charles Owen):
			- added floating point support
			- added programmable interval timer support
			- bug fixes

			h316_cpu.c:
			- added instruction history
			- added DMA/DMC support
			- added device ENABLE/DISABLE support
			- change default to HSA option included

			h316_dp.c: added moving head disk support

			h316_fhd.c: added fixed head disk support

			h316_mt.c: added magtape support

			h316_sys.c: added new device support

			nova_dkp.c (Charles Owen):
			- fixed bug in flag clear sequence
			- added diagnostic mode support for disk sizing

`			nova_mt.c (Charles Owen):
			- fixed bug, space operations return record count
			- fixed bug, reset doesn't cancel rewind

			nova_sys.c: added floating point, timer support (from Charles Owen)

			i1620_cpu.c: fixed bug in branch digit (found by Dave Babcock)

			pdp1_drm.c:
			- added parallel drum support
			- fixed bug in serial drum instructin decoding

			pdp1_sys.c: added parallel drum support, mnemonics

			pdp11_cpu.c:
			- added autoconfiguration controls
			- added support for 18b-only Qbus devices
			- cleaned up addressing/bus definitions

			pdp11_rk.c, pdp11_ry.c, pdp11_tm.c, pdp11_hk.c:
			- added Q18 attribute

			pdp11_io.c:
			- added autoconfiguration controls
			- fixed bug in I/O configuration (found by Dave Hittner)

			pdp11_rq.c:
			- revised MB->LBN conversion for greater accuracy
			- fixed bug with multiple RAUSER drives

			pdp11_tc.c: changed to be off by default (base config is Qbus)

			pdp11_xq.c (Dave Hittner, Mark Pizzolato):
			- fixed second controller interrupts
			- fixed bugs in multicast and promiscuous setup
  
			pdp18b_cpu.c:
			- added instruction history
			- fixed PDP-4,-7,-9 autoincrement bug
			- change PDP-7,-9 default to API option included

			pdp8_defs.h, pdp8_sys.c:
			- added DECtape off reel message
			- added support for TSC8-75 (ETOS) option
			- added support for TD8E controller

			pdp8_cpu.c: added instruction history

			pdp8_rx.c:
			- fixed bug in RX28 read status (found by Charles Dickman)
			- fixed double density write

			pdp8_td.c: added TD8E controller

			pdp8_tsc.c: added TSC8-75 option

			vax_cpu.c:
			- revised instruction history for dynamic sizing
			- added autoconfiguration controls

			vax_io.c:
			- added autoconfiguration controls
			- fixed bug in I/O configuration (found by Dave Hittner)

			id16_cpu.c: revised instruction decoding

			id32_cpu.c:
			- revised instruction decoding
			- added instruction history

/* V3.0 revision history 

  2	15-Sep-03	scp.c:
			- fixed end-of-file problem in dep, idep
			- fixed error on trailing spaces in dep, idep

			pdp1_stddev.c
			- fixed system hang if continue after PTR error
			- added PTR start/stop functionality
			- added address switch functionality to PTR BOOT

			pdp1_sys.c: added multibank capability to LOAD
  
			pdp18b_cpu.c:
			- fixed priorities in PDP-15 API (PI between 3 and 4)
			- fixed sign handling in PDP-15 unsigned mul/div
			- fixed bug in CAF, must clear API subsystem

			i1401_mt.c:
			- fixed tape read end-of-record handling based on real 1401
			- added diagnostic read (space forward)

			i1620_cpu.c
			- fixed bug in immediate index add (found by Michael Short)

  1	27-Jul-03	pdp1_cpu.c: updated to detect indefinite I/O wait

			pdp1_drm.c: fixed incorrect logical, missing activate, break

			pdp1_lp.c:
			- fixed bugs in instruction decoding, overprinting
			- updated to detect indefinite I/O wait

			pdp1_stddev.c:
			- changed RIM loader to be "hardware"
			- updated to detect indefinite I/O wait

			pdp1_sys.c: added block loader format support to LOAD

			pdp10_rp.c: fixed bug in read header

			pdp11_rq: fixed bug in user disk size (found by Chaskiel M Grundman)

			pdp18b_cpu.c:
			- added FP15 support
			- added XVM support
			- added EAE support to the PDP-4
			- added PDP-15 "re-entrancy ECO"
			- fixed memory protect/skip interaction
			- fixed CAF to only reset peripherals

			pdp18b_fpp.c: added FP15

			pdp18b_lp.c: fixed bug in Type 62 overprinting

			pdp18b_rf.c: fixed bug in set size routine

			pdp18b_stddev.c:
			- increased PTP TIME for PDP-15 operating systems
			- added hardware RIM loader for PDP-7, PDP-9, PDP-15

			pdp18b_sys.c: added FP15, KT15, XVM instructions

			pdp8b_df.c, pdp8_rf.c: fixed bug in set size routine

			hp2100_dr.c:
			- fixed drum sizes
			- fixed variable capacity interaction with SAVE/RESTORE

			i1401_cpu.c: revised fetch to model hardware more closely

			ibm1130: fixed bugs found by APL 1130

			nova_dsk.c: fixed bug in set size routine

			altairz80: fixed bug in real-time clock on Windows host

  0	15-Jun-03	scp.c:
			- added ASSIGN/DEASSIGN
			- changed RESTORE to detach files
			- added u5, u6 unit fields
			- added USE_ADDR64 support
			- changed some structure fields to unsigned

			scp_tty.c: added extended file seek

			sim_sock.c: fixed calling sequence in stubs

			sim_tape.c:
			- added E11 and TPC format support
			- added extended file support

			sim_tmxr.c: fixed bug in SHOW CONNECTIONS

			all magtapes:
			- added multiformat support
			- added extended file support

			i1401_cpu.c:
			- fixed mnemonic, instruction lengths, and reverse
			   scan length check bug for MCS
			- fixed MCE bug, BS off by 1 if zero suppress
			- fixed chaining bug, D lost if return to SCP
			- fixed H branch, branch occurs after continue
			- added check for invalid 8 character MCW, LCA

			i1401_mt.c: fixed load-mode end of record response

			nova_dsk.c: fixed variable size interaction with restore

			pdp1_dt.c: fixed variable size interaction with restore

			pdp10_rp.c: fixed ordering bug in attach

			pdp11_cpu.c:
			- fixed bug in MMR1 update (found by Tim Stark)
			- fixed bug in memory size table

			pdp11_lp.c, pdp11_rq.c: added extended file support

			pdp11_rl.c, pdp11_rp.c, pdp11_ry.c: fixed ordering bug in attach

			pdp11_tc.c: fixed variable size interaction with restore

			pdp11_xq.c:
			- corrected interrupts on IE state transition (code by Tom Evans)
			- added interrupt clear on soft reset (first noted by Bob Supnik)
			- removed interrupt when setting XL or RL (multiple people)
			- added SET/SHOW XQ STATS
			- added SHOW XQ FILTERS
			- added ability to split received packet into multiple buffers
			- added explicit runt & giant packet processing

			vax_fpa.c:
			- fixed integer overflow bug in CVTfi
			- fixed multiple bugs in EMODf

			vax_io.c: optimized byte and word DMA routines

			vax_sysdev.c:
			- added calibrated delay to ROM reads (from Mark Pizzolato)
			- fixed calibration problems in interval timer (from Mark Pizzolato)

			pdp1_dt.c: fixed variable size interaction with restore

			pdp18b_dt.c: fixed variable size interaction with restore

			pdp18b_mt.c: fixed bug in MTTR

			pdp18b_rf.c: fixed variable size interaction with restore

			pdp8_df.c, pdp8_rf.c: fixed variable size interaction
			with restore

			pdp8_dt.c: fixed variable size interaction with restore

			pdp8_mt.c: fixed bug in SKTR

			hp2100_dp.c,hp2100_dq.c:
			- fixed bug in read status (13210A controller)
			- fixed bug in seek completion

			id_pt.c: fixed type declaration (found by Mark Pizzolato)

			gri_cpu.c: fixed bug in SC queue pointer management

/* V2.10 revision history

  4	03-Mar-03	scp.c
			- added .ini startup file capability
			- added multiple breakpoint actions
			- added multiple switch evaluation points
			- fixed bug in multiword deposits to file

			sim_tape.c: magtape simulation library

			h316_stddev.c: added set line frequency command

			hp2100_mt.c, hp2100_ms.c: revised to use magtape library

			i1401_mt.c: revised to use magtape library

			id_dp.c, id_idc.c: fixed cylinder overflow on writes

			id_mt.c:
			- fixed error handling to stop selector channel
			- revised to use magtape library

			id16_sys.c, id32_sys.c: added relative addressing support

			id_uvc.c:
			- added set frequency command to line frequency clock
			- improved calibration algorithm for precision clock

			nova_clk.c: added set line frequency command

			nova_dsk.c: fixed autosizing algorithm

			nova_mt.c: revised to use magtape library

			pdp10_tu.c: revised to use magtape library

			pdp11_cpu.c: fixed bug in MMR1 update (found by Tim Stark)

			pdp11_stddev.c
			- added set line frequency command
			- added set ctrl-c command

			pdp11_rq.c:
			- fixed ordering problem in queue process
			- fixed bug in vector calculation for VAXen
			- added user defined drive support

			pdp11_ry.c: fixed autosizing algorithm

			pdp11_tm.c, pdp11_ts.c: revised to use magtape library

			pdp11_tq.c:
			- fixed ordering problem in queue process
			- fixed overly restrictive test for bad modifiers
			- fixed bug in vector calculation for VAXen
			- added variable controller, user defined drive support
			- revised to use magtape library

			pdp18b_cpu.c: fixed three EAE bugs (found by Hans Pufal)

			pdp18b_mt.c:
			- fixed bugs in BOT error handling, interrupt handling
			- revised to use magtape library

			pdp18b_rf.c:
			- removed 22nd bit from disk address
			- fixed autosizing algorithm

			pdp18b_stddev.c:
			- added set line frequency command
			- added set ctrl-c command

			pdp18b_sys.c: fixed FMTASC printouts (found by Hans Pufal)

			pdp8_clk.c: added set line frequency command

			pdp8_df.c, pdp8_rf.c, pdp8_rx.c: fixed autosizing algorithm

			pdp8_mt.c:
			- fixed bug in BOT error handling
			- revised to use magtape library

			pdp8_tt.c: added set ctrl-c command

			sds_cpu.c: added set line frequency command

			sds_mt.c: revised to use magtape library

			vax_stddev.c: added set ctrl-c command

  3	06-Feb-03	scp.c:
			- added dynamic extension of the breakpoint table
			- added breakpoint actions

			hp2100_cpu.c: fixed last cycle bug in DMA output (found by
			Mike Gemeny)

			hp2100_ipl.c: individual links are full duplex (found by
			Mike Gemeny)

			pdp11_cpu.c: changed R, SP to track PSW<rs,cm> respectively

			pdp18b_defs.h, pdp18b_sys.c: added RB09 fixed head disk,
			LP09 printer

			pdp18b_rf.c:
			- fixed IOT decoding (found by Hans Pufal)
			- fixed address overrun logic
			- added variable number of platters and autosizing

			pdp18b_rf.c:
			- fixed IOT decoding
			- fixed bug in command initiation

			pdp18b_rb.c: new RB09 fixed head disk

			pdp18b_lp.c: new LP09 line printer

			pdp8_df.c: added variable number of platters and autosizing

			pdp8_rf.c: added variable number of platters and autosizing

			nova_dsk.c: added variable number of platters and autosizing

			id16_cpu.c: fixed bug in SETM, SETMR (found by Mark Pizzolato)

  2     15-Jan-03	scp.c:
			- added dynamic memory size flag and RESTORE support
			- added EValuate command
			- added get_ipaddr routine
			- added ! (OS command) feature (from Mark Pizzolato)
			- added BREAK support to sim_poll_kbd (from Mark Pizzolato)

			sim_tmxr.c:
			- fixed bugs in IAC+IAC handling (from Mark Pizzolato)
			- added IAC+BRK handling (from Mark Pizzolato)

			sim_sock.c:
			- added use count for Windows start/stop
			- added sim_connect_sock

			pdp1_defs.h, pdp1_cpu.c, pdp1_sys.c, pdp1_drm.c:
			added Type 24 serial drum

			pdp18_defs.h: added PDP-4 drum support

			hp2100_cpu.c: added 21MX IOP support

			hp2100_ipl.c: added HP interprocessor link support

			pdp11_tq.c: fixed bug in transfer end packet length

			pdp11_xq.c:
			- added VMScluster support (thanks to Mark Pizzolato)
			- added major performance enhancements (thanks to Mark Pizzolato)
			- added local packet processing
			- added system id broadcast

			pdp11_stddev.c: changed default to 7b (for early UNIX)

			vax_cpu.c, vax_io.c, vax_stddev.c, vax_sysdev.c:
			added console halt capability (from Mark Pizzolato)

			all terminals and multiplexors: added BREAK support

  1	21-Nov-02	pdp1_stddev.c: changed typewriter to half duplex
			(found by Derek Peschel)

			pdp10_tu.c:
			- fixed bug in bootstrap (reported by Michael Thompson)
			- fixed bug in read (reported by Harris Newman)

  0	15-Nov-02	SCP and libraries
			scp.c:
			- added Telnet console support
			- removed VT emulation support
			- added support for statically buffered devices
			- added HELP <command>
			- fixed bugs in set_logon, ssh_break (found by David Hittner)
			- added VMS file optimization (from Robert Alan Byer)
			- added quiet mode, DO with parameters, GUI interface,
			   extensible commands (from Brian Knittel)
			- added DEVICE context and flags
			- added central device enable/disable support
			- modified SAVE/GET to save and restore flags
			- modified boot routine calling sequence
			scp_tty.c:
			- removed VT emulation support
			- added sim_os_sleep, renamed sim_poll_kbd, sim_putchar
			sim_tmxr.c:
			- modified for Telnet console support
			- fixed bug in binary (8b) support
			sim_sock.c: modified for Telnet console support
			sim_ether.c: new library for Ethernet (from David Hittner)

			all magtapes:
			- added support for end of medium
			- cleaned up BOT handling

			all DECtapes: added support for RT11 image file format

			most terminals and multiplexors:
			- added support for 7b vs 8b character processing

			PDP-1
			pdp1_cpu.c, pdp1_sys.c, pdp1_dt.c: added PDP-1 DECtape support

			PDP-8
			pdp8_cpu.c, all peripherals:
			- added variable device number support
			- added new device enabled/disable support
			pdp8_rx.c: added RX28/RX02 support

			PDP-11
			pdp11_defs.h, pdp11_io.c, pdp11_sys.c, all peripherals:
			- added variable vector support
			- added new device enable/disable support
			- added autoconfiguration support
			all bootstraps: modified to support variable addresses
			dec_mscp.h, pdp11_tq.c: added TK50 support
			pdp11_rq.c:
			- added multicontroller support
			- fixed bug in HBE error log packet
			- fixed bug in ATP processing
			pdp11_ry.c: added RX211/RX02 support
			pdp11_hk.c: added RK611/RK06/RK07 support
			pdp11_tq.c: added TMSCP support
			pdp11_xq.c: added DEQNA/DELQA support (from David Hittner)
			pdp11_pclk.c: added KW11P support
			pdp11_ts.c:
			- fixed bug in CTL decoding
			- fixed bug in extended status XS0_MOT
			pdp11_stddev.c: removed paper tape to its own module

			PDP-18b
			pdp18b_cpu.c, all peripherals:
			- added variable device number support
			- added new device enabled/disabled support

			VAX
			dec_dz.h: fixed bug in number of boards calculation
			vax_moddefs.h, vax_io.c, vax_sys.c, all peripherals:
			- added variable vector support
			- added new device enable/disable support
			- added autoconfiguration support
			vax_sys.c:
			- generalized examine/deposit
			- added TMSCP, multiple RQDX3, DEQNA/DELQA support
			vax_stddev.c: removed paper tape, now uses PDP-11 version
			vax_sysdev.c:
			- allowed NVR to be attached to file
			- removed unused variables (found by David Hittner)

			PDP-10
			pdp10_defs.h, pdp10_ksio.c, all peripherals:
			- added variable vector support
			- added new device enable/disable support
			pdp10_defs.h, pdp10_ksio.c: added support for standard PDP-11
			   peripherals, added RX211 support
			pdp10_pt.c: rewritten to reference common implementation

			Nova, Eclipse:
			nova_cpu.c, eclipse_cpu.c, all peripherals:
			- added new device enable/disable support

			HP2100
			hp2100_cpu:
			- fixed bugs in the EAU, 21MX, DMS, and IOP instructions
			- fixed bugs in the memory protect and DMS functions
			- created new options to enable/disable EAU, MPR, DMS
			- added new device enable/disable support
			hp2100_fp.c:
			- recoded to conform to 21MX microcode algorithms
			hp2100_stddev.c:
			- fixed bugs in TTY reset, OTA, time base generator
			- revised BOOT support to conform to RBL loader
			- added clock calibration
			hp2100_dp.c:
			- changed default to 13210A
			- added BOOT support
			hp2100_dq.c:
			- finished incomplete functions, fixed head switching
			- added BOOT support
			hp2100_ms.c:
			- fixed bugs found by diagnostics
			- added 13183 support
			- added BOOT support
			hp2100_mt.c:
			- fixed bugs found by diagnostics
			- disabled by default
			hp2100_lpt.c: implemented 12845A controller
			hp2100_lps.c:
			- renamed 12653A controller
			- added diagnostic mode for MPR, DCPC diagnostics
			- disabled by default

			IBM 1620: first release

/* V2.9 revision history

  11	20-Jul-02	i1401_mt.c: on read, end of record stores group mark
			   without word mark (found by Van Snyder)

			i1401_dp.c: reworked address generation and checking

			vax_cpu.c: added infinite loop detection and halt to
			   boot ROM option (from Mark Pizzolato)

			vax_fpa.c: changed function names to prevent conflict
			   with C math library

			pdp11_cpu.c: fixed bug in MMR0 update logic (from
			   John Dundas)

			pdp18b_stddev.c: added "ASCII mode" for reader and
			   punch (from Hans Pufal)

			gri_*.c: added GRI-909 simulator

			scp.c: added DO echo, DO exit (from Brian Knittel)

			scp_tty.c: added Windows priority hacking (from
			   Mark Pizzolato)

  10	15-Jun-02	scp.c: fixed error checking on calls to fxread/fxwrite
			   (found by Norm Lastovic)

			scp_tty.c, sim_vt.h, sim_vt.c: added VTxxx emulation
			   support for Windows (from Fischer Franz)

			sim_sock.c: added OS/2 support (from Holger Veit)

			pdp11_cpu.c: fixed bugs (from John Dundas)
			- added special case for PS<15:12> = 1111 to MFPI
			- removed special case from MTPI
			- added masking of relocation adds 

			i1401_cpu.c:
			- added multiply/divide
			- fixed bugs (found by Van Snyder)
			   o 5 and 7 character H, 7 character doesn't branch
			   o 8 character NOP
			   o 1401-like memory dump

			i1401_dp.c: added 1311 disk

  9	04-May-02	pdp11_rq: fixed bug in polling routine

  8	03-May-02	scp.c:
			- changed LOG/NOLOG to SET LOG/NOLOG
			- added SHOW LOG
			- added SET VT/NOVT and SHOW VT for VT emulation
  
			sim_sock.h: changed VMS stropt.h include to ioctl.h

			vax_cpu.c
			- added TODR powerup routine to set date, time on boot
			- fixed exception flows to clear trap request
			- fixed register logging in autoincrement indexed

			vax_stddev.c: added TODR powerup routine
			
			vax_cpu1.c: fixed exception flows to clear trap request

  7	30-Apr-02	scp.c: fixed bug in clock calibration when (real) clock
			   jumps forward due too far (found by Jonathan Engdahl)
  
			pdp11_cpu.c: fixed bugs, added features (from John Dundas
			   and Wolfgang Helbig)
			- added HTRAP and BPOK to maintenance register
			- added trap on kernel HALT if MAINT<HTRAP> set
			- fixed red zone trap, clear odd address and nxm traps
			- fixed RTS SP, don't increment restored SP
			- fixed TSTSET, write dst | 1 rather than prev R0 | 1
			- fixed DIV, set N=0,Z=1 on div by zero (J11, 11/70)
			- fixed DIV, set set N=Z=0 on overfow (J11, 11/70)
			- fixed ASH, ASHC, count = -32 used implementation-
			   dependent 32 bit right shift
			- fixed illegal instruction test to detect 000010
			- fixed write-only page test

			pdp11_rp.c: fixed SHOW ADDRESS command

			vaxmod_defs.h: fixed DZ vector base and number of lines

			dec_dz.h:
			- fixed interrupt acknowledge routines
			- fixed SHOW ADDRESS command

			all magtape routines: added test for badly formed
			   record length (suggested by Jonathan Engdahl)

  6	18-Apr-02	vax_cpu.c: fixed CASEL condition codes

			vax_cpu1.c: fixed vfield pos > 31 test to be unsigned

			vax_fpu.c: fixed EDIV overflow test for 0 quotient

  5	14-Apr-02	vax_cpu1.c:
			- fixed interrupt, prv_mode set to 0 (found by Tim Stark)
			- fixed PROBEx to mask mode to 2b (found by Kevin Handy)

  4	1-Apr-02	pdp11_rq.c: fixed bug, reset cleared write protect status

			pdp11_ts.c: fixed bug in residual frame count after space

  3	15-Mar-02	pdp11_defs.h: changed default model to KDJ11A (11/73)

			pdp11_rq.c: adjusted delays for M+ timing bugs

			hp2100_cpu.c, pdp10_cpu.c, pdp11_cpu.c: tweaked abort
			   code for ANSI setjmp/longjmp compliance

			hp2100_cpu.c, hp2100_fp.c, hp2100_stddev.c, hp2100_sys.c:
			   revised to allocate memory dynamically

  2	01-Mar-02	pdp11_cpu.c:
			- fixed bugs in CPU registers
			- fixed double operand evaluation order for M+

			pdp11_rq.c: added delays to initialization for
			   RSX11M+ prior to V4.5

  1	20-Feb-02	scp.c: fixed bug in clock calibration when (real)
			time runs backwards

			pdp11_rq.c: fixed bug in host timeout logic

			pdp11_ts.c: fixed bug in message header logic

			pdp18b_defs.h, pdp18b_dt.c, pdp18b_sys.c: added
			   PDP-7 DECtape support

			hp2100_cpu.c:
			- added floating point and DMS
			- fixed bugs in DIV, ASL, ASR, LBT, SBT, CBT, CMW

			hp2100_sys.c: added floating point, DMS

			hp2100_fp.c: added floating point

			ibm1130: added Brian Knittel's IBM 1130 simulator

  0	30-Jan-02	scp.c:
			- generalized timer package for multiple timers
			- added circular register arrays
			- fixed bugs, line spacing in modifier display
			- added -e switch to attach
			- moved device enable/disable to simulators

			scp_tty.c: VAX specific fix (from Robert Alan Byer)

			sim_tmxr.c, sim_tmxr.h:
			- added tmxr_fstats, tmxr_dscln
			- renamed tmxr_fstatus to tmxr_fconns

			sim_sock.c, sim_sock.h: added VMS support (from
			Robert Alan Byer)

			pdp_dz.h, pdp18b_tt1.c, nova_tt1.c:
			- added SET DISCONNECT
			- added SHOW STATISTICS

			pdp8_defs.h: fixed bug in interrupt enable initialization

			pdp8_ttx.c: rewrote as unified multiplexor

			pdp11_cpu.c: fixed calc_MMR1 macro (found by Robert Alan Byer)

			pdp11_stddev.c: fixed bugs in KW11L (found by John Dundas)

			pdp11_rp.c: fixed bug in 18b mode boot

			pdp11 bootable I/O devices: fixed register setup at boot
			   exit (found by Doug Carman)

			hp2100_cpu.c:
			- fixed DMA register tables (found by Bill McDermith)
			- fixed SZx,SLx,RSS bug (found by Bill McDermith)
			- fixed flop restore logic (found by Bill McDermith)

			hp2100_mt.c: fixed bug on write of last character

			hp2100_dq,dr,ms,mux.c: added new disk, magtape, and terminal
			   multiplexor controllers

			i1401_cd.c, i1401_mt.c: new zero footprint bootstraps
			   (from Van Snyder)

			i1401_sys.c: fixed symbolic display of H, NOP with no trailing
			   word mark (found by Van Snyder)

			most CPUs:
			- replaced OLDPC with PC queue
			- implemented device enable/disable locally

   V2.8 revision history

5	25-Dec-01	scp.c: fixed bug in DO command (found by John Dundas)

			pdp10_cpu.c:
			- moved trap-in-progress to separate variable
			- cleaned up declarations
			- cleaned up volatile state for GNU C longjmp

			pdp11_cpu.c: cleaned up declarations
  
			pdp11_rq.c: added RA-class disks

4	17-Dec-01	pdp11_rq.c: added delayed processing of packets

3	16-Dec-01	pdp8_cpu.c:
			- mode A EAE instructions didn't clear GTF
			- ASR shift count > 24 mis-set GTF
			- effective shift count == 32 didn't work

2	07-Dec-01	scp.c: added breakpoint package

			all CPU's: revised to use new breakpoint package

1	05-Dec-01	scp.c: fixed bug in universal register name logic

0	30-Nov-01	Reorganized simh source and documentation tree

			scp: Added DO command, universal registers, extended
			   SET/SHOW logic

			pdp11: overhauled PDP-11 for DMA map support, shared
			   sources with VAX, dynamic buffer allocation

			18b pdp: overhauled interrupt structure

			pdp8: added RL8A

			pdp10: fixed two ITS-related bugs (found by Dave Conroy)

   V2.7 revision history

patch	date		module(s) and fix(es)

15	23-Oct-01	pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: fixed bugs
			   error interrupt handling

			pdp10_defs.h, pdp10_ksio.c, pdp10_fe.c, pdp10_fe.c,
			pdp10_rp.c, pdp10_tu.c: reworked I/O page interface
			   to use symbolic base addresses and lengths

14	20-Oct-01	dec_dz.h, sim_tmxr_h, sim_tmxr.c: fixed bug in Telnet
			   state handling (found by Thord Nilson), removed
			   tmxr_getchar, added tmxr_rqln and tmxr_tqln

13	18-Oct-01	pdp11_tm.c: added stub diagnostic register clock
			   for RSTS/E (found by Thord Nilson)

12	15-Oct-01	pdp11_defs.h, pdp11_cpu.c, pdp11_tc.c, pdp11_ts.c,
			   pdp11_rp.c: added operations logging

11	8-Oct-01	scp.c: added sim_rev.h include and version print

			pdp11_cpu.c: fixed bug in interrupt acknowledge,
			   multiple outstanding interrupts caused the lowest
			   rather than the highest to be acknowledged

10	7-Oct-01	pdp11_stddev.c: added monitor bits (CSR<7>) for full
			   KW11L compatibility, needed for RSTS/E autoconfiguration

9	6-Oct-01	pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: rewrote interrupt
			   logic from RH11/RH70 schematics, to mimic hardware quirks

			dec_dz.c: fixed bug in carrier detect logic, carrier
			   detect was being cleared on next modem poll

8	4-Oct-01	pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: undid edit of
			   28-Sep-01; real problem was level-sensitive nature of
	   		   CS1_SC, but CS1_SC can only trigger an interrupt if
	   		   DONE is set

7	2-Oct-01	pdp11_rp.c, pdp10_rp.c: CS1_SC is evaluated as a level-
			   sensitive, rather than an edge-sensitive, input to
			   interrupt request

6	30-Sep-01	pdp11_rp.c, pdp10_rp.c: separated out CS1<5:0> to per-
			   drive registers

			pdp10_tu.c: based on above, cleaned up handling of
			   non-existent formatters, fixed non-data transfer
			   commands clearing DONE

5	28-Sep-01	pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: controller should
			   interrupt if ATA or SC sets when IE is set, was
			   interrupting only if DON = 1 as well

4	27-Sep-01	pdp11_ts.c:
			- NXM errors should return TC4 or TC5; were returning TC3
			- extended features is part of XS2; was returned in XS3
			- extended characteristics (fifth) word needed for RSTS/E

			pdp11_tc.c: stop, stop all do cause an interrupt

			dec_dz.h: scanner should find a ready output line, even
			   if there are no connections; needed for RSTS/E autoconfigure

			scp.c:
			- added routine sim_qcount for 1130
			- added "simulator exit" detach routine for 1130

			sim_defs.h: added header for sim_qcount

3	20-Sep-01	pdp11_ts.c: boot code binary was incorrect

2	19-Sep-01	pdp18b_cpu.c: EAE should interpret initial count of 00
			   as 100

			scp.c: modified Macintosh support

1	17-Sep-01	pdp8_ttx.c: new module for PDP-8 multi-terminal support

			pdp18b_tt1.c: modified to use sim_tmxr library

			nova_tt1.c: modified to use sim_tmxr library

			dec_dz.h: added autodisconnect support

			scp.c: removed old multiconsole support

			sim_tmxr.c: modified calling sequence for sim_putchar_ln

			sim_sock.c: added Macintosh sockets support
*/

#endif