| /* pdp11_rx.c: RX11/RX01 floppy disk simulator | |
| Copyright (c) 1993-2013, Robert M Supnik | |
| Permission is hereby granted, free of charge, to any person obtaining a | |
| copy of this software and associated documentation files (the "Software"), | |
| to deal in the Software without restriction, including without limitation | |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| and/or sell copies of the Software, and to permit persons to whom the | |
| Software is furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be included in | |
| all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| Except as contained in this notice, the name of Robert M Supnik shall not be | |
| used in advertising or otherwise to promote the sale, use or other dealings | |
| in this Software without prior written authorization from Robert M Supnik. | |
| rx RX11/RX01 floppy disk | |
| 23-Oct-13 RMS Revised for new boot setup routine | |
| 03-Sep-13 RMS Added explicit void * cast | |
| 07-Jul-05 RMS Removed extraneous externs | |
| 12-Oct-02 RMS Added autoconfigure support | |
| 08-Oct-02 RMS Added variable address support to bootstrap | |
| Added vector change/display support | |
| Revised state machine based on RX211 | |
| New data structures | |
| Fixed reset of disabled device | |
| 26-Jan-02 RMS Revised bootstrap to conform to M9312 | |
| 06-Jan-02 RMS Revised enable/disable support | |
| 30-Nov-01 RMS Added read only unit, extended SET/SHOW support | |
| 24-Nov-01 RMS Converted FLG to array | |
| 07-Sep-01 RMS Revised device disable and interrupt mechanisms | |
| 17-Jul-01 RMS Fixed warning from VC++ 6.0 | |
| 26-Apr-01 RMS Added device enable/disable support | |
| 13-Apr-01 RMS Revised for register arrays | |
| 15-Feb-01 RMS Corrected bootstrap string | |
| 14-Apr-99 RMS Changed t_addr to unsigned | |
| An RX01 diskette consists of 77 tracks, each with 26 sectors of 128B. | |
| Tracks are numbered 0-76, sectors 1-26. | |
| */ | |
| #include "pdp11_defs.h" | |
| #define RX_NUMTR 77 /* tracks/disk */ | |
| #define RX_M_TRACK 0377 | |
| #define RX_NUMSC 26 /* sectors/track */ | |
| #define RX_M_SECTOR 0177 | |
| #define RX_NUMBY 128 /* bytes/sector */ | |
| #define RX_SIZE (RX_NUMTR * RX_NUMSC * RX_NUMBY) /* bytes/disk */ | |
| #define RX_NUMDR 2 /* drives/controller */ | |
| #define RX_M_NUMDR 01 | |
| #define UNIT_V_WLK (UNIT_V_UF) /* write locked */ | |
| #define UNIT_WLK (1u << UNIT_V_UF) | |
| #define UNIT_WPRT (UNIT_WLK | UNIT_RO) /* write protect */ | |
| #define IDLE 0 /* idle state */ | |
| #define RWDS 1 /* rw, sect next */ | |
| #define RWDT 2 /* rw, track next */ | |
| #define RWXFR 3 /* rw, transfer */ | |
| #define FILL 4 /* fill buffer */ | |
| #define EMPTY 5 /* empty buffer */ | |
| #define CMD_COMPLETE 6 /* set done next */ | |
| #define INIT_COMPLETE 7 /* init compl next */ | |
| #define RXCS_V_FUNC 1 /* function */ | |
| #define RXCS_M_FUNC 7 | |
| #define RXCS_FILL 0 /* fill buffer */ | |
| #define RXCS_EMPTY 1 /* empty buffer */ | |
| #define RXCS_WRITE 2 /* write sector */ | |
| #define RXCS_READ 3 /* read sector */ | |
| #define RXCS_RXES 5 /* read status */ | |
| #define RXCS_WRDEL 6 /* write del data */ | |
| #define RXCS_ECODE 7 /* read error code */ | |
| #define RXCS_V_DRV 4 /* drive select */ | |
| #define RXCS_V_DONE 5 /* done */ | |
| #define RXCS_V_IE 6 /* intr enable */ | |
| #define RXCS_V_TR 7 /* xfer request */ | |
| #define RXCS_V_INIT 14 /* init */ | |
| #define RXCS_V_ERR 15 /* error */ | |
| #define RXCS_FUNC (RXCS_M_FUNC << RXCS_V_FUNC) | |
| #define RXCS_DRV (1u << RXCS_V_DRV) | |
| #define RXCS_DONE (1u << RXCS_V_DONE) | |
| #define RXCS_IE (1u << RXCS_V_IE) | |
| #define RXCS_TR (1u << RXCS_V_TR) | |
| #define RXCS_INIT (1u << RXCS_V_INIT) | |
| #define RXCS_ERR (1u << RXCS_V_ERR) | |
| #define RXCS_ROUT (RXCS_ERR+RXCS_TR+RXCS_IE+RXCS_DONE) | |
| #define RXCS_IMP (RXCS_ROUT+RXCS_DRV+RXCS_FUNC) | |
| #define RXCS_RW (RXCS_IE) /* read/write */ | |
| #define RXCS_GETFNC(x) (((x) >> RXCS_V_FUNC) & RXCS_M_FUNC) | |
| #define RXES_CRC 0001 /* CRC error */ | |
| #define RXES_PAR 0002 /* parity error */ | |
| #define RXES_ID 0004 /* init done */ | |
| #define RXES_WLK 0010 /* write protect */ | |
| #define RXES_DD 0100 /* deleted data */ | |
| #define RXES_DRDY 0200 /* drive ready */ | |
| #define TRACK u3 /* current track */ | |
| #define CALC_DA(t,s) (((t) * RX_NUMSC) + ((s) - 1)) * RX_NUMBY | |
| extern int32 int_req[IPL_HLVL]; | |
| int32 rx_csr = 0; /* control/status */ | |
| int32 rx_dbr = 0; /* data buffer */ | |
| int32 rx_esr = 0; /* error status */ | |
| int32 rx_ecode = 0; /* error code */ | |
| int32 rx_track = 0; /* desired track */ | |
| int32 rx_sector = 0; /* desired sector */ | |
| int32 rx_state = IDLE; /* controller state */ | |
| int32 rx_stopioe = 1; /* stop on error */ | |
| int32 rx_cwait = 100; /* command time */ | |
| int32 rx_swait = 10; /* seek, per track */ | |
| int32 rx_xwait = 1; /* tr set time */ | |
| uint8 rx_buf[RX_NUMBY] = { 0 }; /* sector buffer */ | |
| int32 rx_bptr = 0; /* buffer pointer */ | |
| int32 rx_enb = 1; /* device enable */ | |
| DEVICE rx_dev; | |
| t_stat rx_rd (int32 *data, int32 PA, int32 access); | |
| t_stat rx_wr (int32 data, int32 PA, int32 access); | |
| t_stat rx_svc (UNIT *uptr); | |
| t_stat rx_reset (DEVICE *dptr); | |
| t_stat rx_boot (int32 unitno, DEVICE *dptr); | |
| void rx_done (int32 esr_flags, int32 new_ecode); | |
| /* RX11 data structures | |
| rx_dev RX device descriptor | |
| rx_unit RX unit list | |
| rx_reg RX register list | |
| rx_mod RX modifier list | |
| */ | |
| #define IOLN_RX 004 | |
| DIB rx_dib = { | |
| IOBA_AUTO, IOLN_RX, &rx_rd, &rx_wr, | |
| 1, IVCL (RX), VEC_AUTO, { NULL }, IOLN_RX, | |
| }; | |
| UNIT rx_unit[] = { | |
| { UDATA (&rx_svc, | |
| UNIT_FIX+UNIT_ATTABLE+UNIT_BUFABLE+UNIT_MUSTBUF, RX_SIZE) }, | |
| { UDATA (&rx_svc, | |
| UNIT_FIX+UNIT_ATTABLE+UNIT_BUFABLE+UNIT_MUSTBUF, RX_SIZE) } | |
| }; | |
| REG rx_reg[] = { | |
| { ORDATA (RXCS, rx_csr, 16) }, | |
| { ORDATA (RXDB, rx_dbr, 8) }, | |
| { ORDATA (RXES, rx_esr, 8) }, | |
| { ORDATA (RXERR, rx_ecode, 8) }, | |
| { ORDATA (RXTA, rx_track, 8) }, | |
| { ORDATA (RXSA, rx_sector, 8) }, | |
| { DRDATA (STAPTR, rx_state, 3), REG_RO }, | |
| { DRDATA (BUFPTR, rx_bptr, 7) }, | |
| { FLDATA (INT, IREQ (RX), INT_V_RX) }, | |
| { FLDATA (ERR, rx_csr, RXCS_V_ERR) }, | |
| { FLDATA (TR, rx_csr, RXCS_V_TR) }, | |
| { FLDATA (IE, rx_csr, RXCS_V_IE) }, | |
| { FLDATA (DONE, rx_csr, RXCS_V_DONE) }, | |
| { DRDATA (CTIME, rx_cwait, 24), PV_LEFT }, | |
| { DRDATA (STIME, rx_swait, 24), PV_LEFT }, | |
| { DRDATA (XTIME, rx_xwait, 24), PV_LEFT }, | |
| { FLDATA (STOP_IOE, rx_stopioe, 0) }, | |
| { BRDATA (SBUF, rx_buf, 8, 8, RX_NUMBY) }, | |
| { ORDATA (DEVADDR, rx_dib.ba, 32), REG_HRO }, | |
| { ORDATA (DEVVEC, rx_dib.vec, 16), REG_HRO }, | |
| { NULL } | |
| }; | |
| MTAB rx_mod[] = { | |
| { UNIT_WLK, 0, "write enabled", "WRITEENABLED", NULL }, | |
| { UNIT_WLK, UNIT_WLK, "write locked", "LOCKED", NULL }, | |
| #if defined (VM_PDP11) | |
| { MTAB_XTD|MTAB_VDV|MTAB_VALR, 004, "ADDRESS", "ADDRESS", | |
| &set_addr, &show_addr, NULL }, | |
| { MTAB_XTD|MTAB_VDV, 0, NULL, "AUTOCONFIGURE", | |
| &set_addr_flt, NULL, NULL }, | |
| { MTAB_XTD|MTAB_VDV|MTAB_VALR, 0, "VECTOR", "VECTOR", | |
| &set_vec, &show_vec, NULL }, | |
| #else | |
| { MTAB_XTD|MTAB_VDV, 004, "ADDRESS", "ADDRESS", | |
| NULL, &show_addr, NULL }, | |
| { MTAB_XTD|MTAB_VDV, 0, "VECTOR", "VECTOR", | |
| NULL, &show_vec, NULL }, | |
| #endif | |
| { 0 } | |
| }; | |
| DEVICE rx_dev = { | |
| "RX", rx_unit, rx_reg, rx_mod, | |
| RX_NUMDR, 8, 20, 1, 8, 8, | |
| NULL, NULL, &rx_reset, | |
| &rx_boot, NULL, NULL, | |
| &rx_dib, DEV_DISABLE | DEV_UBUS | DEV_QBUS | |
| }; | |
| /* I/O dispatch routine, I/O addresses 17777170 - 17777172 | |
| 17777170 floppy CSR | |
| 17777172 floppy data register | |
| */ | |
| t_stat rx_rd (int32 *data, int32 PA, int32 access) | |
| { | |
| switch ((PA >> 1) & 1) { /* decode PA<1> */ | |
| case 0: /* RXCS */ | |
| rx_csr = rx_csr & RXCS_IMP; /* clear junk */ | |
| *data = rx_csr & RXCS_ROUT; | |
| break; | |
| case 1: /* RXDB */ | |
| if ((rx_state == EMPTY) && (rx_csr & RXCS_TR)) {/* empty? */ | |
| sim_activate (&rx_unit[0], rx_xwait); | |
| rx_csr = rx_csr & ~RXCS_TR; /* clear xfer */ | |
| } | |
| *data = rx_dbr; /* return data */ | |
| break; | |
| } /* end switch PA */ | |
| return SCPE_OK; | |
| } | |
| t_stat rx_wr (int32 data, int32 PA, int32 access) | |
| { | |
| int32 drv; | |
| switch ((PA >> 1) & 1) { /* decode PA<1> */ | |
| /* Writing RXCS, three cases: | |
| 1. Writing INIT, reset device | |
| 2. Idle and writing new function | |
| - clear error, done, transfer ready, int req | |
| - save int enable, function, drive | |
| - start new function | |
| 3. Otherwise, write IE and update interrupts | |
| */ | |
| case 0: /* RXCS */ | |
| rx_csr = rx_csr & RXCS_IMP; /* clear junk */ | |
| if (access == WRITEB) data = (PA & 1)? /* write byte? */ | |
| (rx_csr & 0377) | (data << 8): (rx_csr & ~0377) | data; | |
| if (data & RXCS_INIT) { /* initialize? */ | |
| rx_reset (&rx_dev); /* reset device */ | |
| return SCPE_OK; /* end if init */ | |
| } | |
| if ((data & CSR_GO) && (rx_state == IDLE)) { /* new function? */ | |
| rx_csr = data & (RXCS_IE + RXCS_DRV + RXCS_FUNC); | |
| drv = ((rx_csr & RXCS_DRV)? 1: 0); /* reselect drive */ | |
| rx_bptr = 0; /* clear buf pointer */ | |
| switch (RXCS_GETFNC (data)) { /* case on func */ | |
| case RXCS_FILL: | |
| rx_state = FILL; /* state = fill */ | |
| rx_csr = rx_csr | RXCS_TR; /* xfer is ready */ | |
| break; | |
| case RXCS_EMPTY: | |
| rx_state = EMPTY; /* state = empty */ | |
| sim_activate (&rx_unit[drv], rx_xwait); | |
| break; | |
| case RXCS_READ: case RXCS_WRITE: case RXCS_WRDEL: | |
| rx_state = RWDS; /* state = get sector */ | |
| rx_csr = rx_csr | RXCS_TR; /* xfer is ready */ | |
| rx_esr = rx_esr & RXES_ID; /* clear errors */ | |
| break; | |
| default: | |
| rx_state = CMD_COMPLETE; /* state = cmd compl */ | |
| sim_activate (&rx_unit[drv], rx_cwait); | |
| break; | |
| } /* end switch func */ | |
| return SCPE_OK; | |
| } /* end if GO */ | |
| if ((data & RXCS_IE) == 0) | |
| CLR_INT (RX); | |
| else if ((rx_csr & (RXCS_DONE + RXCS_IE)) == RXCS_DONE) | |
| SET_INT (RX); | |
| rx_csr = (rx_csr & ~RXCS_RW) | (data & RXCS_RW); | |
| break; /* end case RXCS */ | |
| /* Accessing RXDB, two cases: | |
| 1. Write idle, write | |
| 2. Write not idle and TR set, state dependent | |
| */ | |
| case 1: /* RXDB */ | |
| if ((PA & 1) || ((rx_state != IDLE) && ((rx_csr & RXCS_TR) == 0))) | |
| return SCPE_OK; /* if ~IDLE, need tr */ | |
| rx_dbr = data & 0377; /* save data */ | |
| if ((rx_state != IDLE) && (rx_state != EMPTY)) { | |
| drv = ((rx_csr & RXCS_DRV)? 1: 0); /* select drive */ | |
| sim_activate (&rx_unit[drv], rx_xwait); /* sched event */ | |
| rx_csr = rx_csr & ~RXCS_TR; /* clear xfer */ | |
| } | |
| break; /* end case RXDB */ | |
| } /* end switch PA */ | |
| return SCPE_OK; | |
| } | |
| /* Unit service; the action to be taken depends on the transfer state: | |
| IDLE Should never get here | |
| RWDS Save sector, set TR, set RWDT | |
| RWDT Save track, set RWXFR | |
| RWXFR Read/write buffer | |
| FILL copy ir to rx_buf[rx_bptr], advance ptr | |
| if rx_bptr > max, finish command, else set tr | |
| EMPTY if rx_bptr > max, finish command, else | |
| copy rx_buf[rx_bptr] to ir, advance ptr, set tr | |
| CMD_COMPLETE copy requested data to ir, finish command | |
| INIT_COMPLETE read drive 0, track 1, sector 1 to buffer, finish command | |
| For RWDT and CMD_COMPLETE, the input argument is the selected drive; | |
| otherwise, it is drive 0. | |
| */ | |
| t_stat rx_svc (UNIT *uptr) | |
| { | |
| int32 i, func; | |
| uint32 da; | |
| int8 *fbuf = (int8 *) uptr->filebuf; | |
| func = RXCS_GETFNC (rx_csr); /* get function */ | |
| switch (rx_state) { /* case on state */ | |
| case IDLE: /* idle */ | |
| return SCPE_IERR; /* done */ | |
| case EMPTY: /* empty buffer */ | |
| if (rx_bptr >= RX_NUMBY) /* done all? */ | |
| rx_done (0, 0); | |
| else { | |
| rx_dbr = rx_buf[rx_bptr]; /* get next */ | |
| rx_bptr = rx_bptr + 1; | |
| rx_csr = rx_csr | RXCS_TR; /* set xfer */ | |
| } | |
| break; | |
| case FILL: /* fill buffer */ | |
| rx_buf[rx_bptr] = rx_dbr; /* write next */ | |
| rx_bptr = rx_bptr + 1; | |
| if (rx_bptr < RX_NUMBY) /* more? set xfer */ | |
| rx_csr = rx_csr | RXCS_TR; | |
| else rx_done (0, 0); /* else done */ | |
| break; | |
| case RWDS: /* wait for sector */ | |
| rx_sector = rx_dbr & RX_M_SECTOR; /* save sector */ | |
| rx_csr = rx_csr | RXCS_TR; /* set xfer */ | |
| rx_state = RWDT; /* advance state */ | |
| return SCPE_OK; | |
| case RWDT: /* wait for track */ | |
| rx_track = rx_dbr & RX_M_TRACK; /* save track */ | |
| rx_state = RWXFR; | |
| sim_activate (uptr, /* sched done */ | |
| rx_swait * abs (rx_track - uptr->TRACK)); | |
| return SCPE_OK; | |
| case RWXFR: | |
| if ((uptr->flags & UNIT_BUF) == 0) { /* not buffered? */ | |
| rx_done (0, 0110); /* done, error */ | |
| return IORETURN (rx_stopioe, SCPE_UNATT); | |
| } | |
| if (rx_track >= RX_NUMTR) { /* bad track? */ | |
| rx_done (0, 0040); /* done, error */ | |
| break; | |
| } | |
| uptr->TRACK = rx_track; /* now on track */ | |
| if ((rx_sector == 0) || (rx_sector > RX_NUMSC)) { /* bad sect? */ | |
| rx_done (0, 0070); /* done, error */ | |
| break; | |
| } | |
| da = CALC_DA (rx_track, rx_sector); /* get disk address */ | |
| if (func == RXCS_WRDEL) /* del data? */ | |
| rx_esr = rx_esr | RXES_DD; | |
| if (func == RXCS_READ) { /* read? */ | |
| for (i = 0; i < RX_NUMBY; i++) | |
| rx_buf[i] = fbuf[da + i]; | |
| } | |
| else { | |
| if (uptr->flags & UNIT_WPRT) { /* write and locked? */ | |
| rx_done (RXES_WLK, 0100); /* done, error */ | |
| break; | |
| } | |
| for (i = 0; i < RX_NUMBY; i++) /* write */ | |
| fbuf[da + i] = rx_buf[i]; | |
| da = da + RX_NUMBY; | |
| if (da > uptr->hwmark) | |
| uptr->hwmark = da; | |
| } | |
| rx_done (0, 0); /* done */ | |
| break; | |
| case CMD_COMPLETE: /* command complete */ | |
| if (func == RXCS_ECODE) { /* read ecode? */ | |
| rx_dbr = rx_ecode; /* set dbr */ | |
| rx_done (0, -1); /* don't update */ | |
| } | |
| else rx_done (0, 0); | |
| break; | |
| case INIT_COMPLETE: /* init complete */ | |
| rx_unit[0].TRACK = 1; /* drive 0 to trk 1 */ | |
| rx_unit[1].TRACK = 0; /* drive 1 to trk 0 */ | |
| if ((rx_unit[0].flags & UNIT_BUF) == 0) { /* not buffered? */ | |
| rx_done (RXES_ID, 0010); /* init done, error */ | |
| break; | |
| } | |
| da = CALC_DA (1, 1); /* track 1, sector 1 */ | |
| for (i = 0; i < RX_NUMBY; i++) /* read sector */ | |
| rx_buf[i] = fbuf[da + i]; | |
| rx_done (RXES_ID, 0); /* set done */ | |
| if ((rx_unit[1].flags & UNIT_ATT) == 0) | |
| rx_ecode = 0020; | |
| break; | |
| } /* end case state */ | |
| return SCPE_OK; | |
| } | |
| /* Command complete. Set done and put final value in interface register, | |
| request interrupt if needed, return to IDLE state. | |
| */ | |
| void rx_done (int32 esr_flags, int32 new_ecode) | |
| { | |
| int32 drv = (rx_csr & RXCS_DRV)? 1: 0; | |
| rx_state = IDLE; /* now idle */ | |
| rx_csr = rx_csr | RXCS_DONE; /* set done */ | |
| if (rx_csr & RXCS_IE) SET_INT (RX); /* if ie, intr */ | |
| rx_esr = (rx_esr | esr_flags) & ~RXES_DRDY; | |
| if (rx_unit[drv].flags & UNIT_ATT) | |
| rx_esr = rx_esr | RXES_DRDY; | |
| if (new_ecode > 0) /* test for error */ | |
| rx_csr = rx_csr | RXCS_ERR; | |
| if (new_ecode < 0) /* don't update? */ | |
| return; | |
| rx_ecode = new_ecode; /* update ecode */ | |
| rx_dbr = rx_esr; /* update RXDB */ | |
| return; | |
| } | |
| /* Device initialization. The RX is one of the few devices that schedules | |
| an I/O transfer as part of its initialization. | |
| */ | |
| t_stat rx_reset (DEVICE *dptr) | |
| { | |
| rx_csr = rx_dbr = 0; /* clear regs */ | |
| rx_esr = rx_ecode = 0; /* clear error */ | |
| rx_track = rx_sector = 0; /* clear addr */ | |
| rx_state = IDLE; /* ctrl idle */ | |
| CLR_INT (RX); /* clear int req */ | |
| sim_cancel (&rx_unit[1]); /* cancel drive 1 */ | |
| if (dptr->flags & DEV_DIS) /* disabled? */ | |
| sim_cancel (&rx_unit[0]); | |
| else if (rx_unit[0].flags & UNIT_BUF) { /* attached? */ | |
| rx_state = INIT_COMPLETE; /* yes, sched init */ | |
| sim_activate (&rx_unit[0], rx_swait * abs (1 - rx_unit[0].TRACK)); | |
| } | |
| else rx_done (0, 0010); /* no, error */ | |
| return auto_config (0, 0); /* run autoconfig */ | |
| } | |
| /* Device bootstrap */ | |
| #define BOOT_START 02000 /* start */ | |
| #define BOOT_ENTRY (BOOT_START + 002) /* entry */ | |
| #define BOOT_UNIT (BOOT_START + 010) /* unit number */ | |
| #define BOOT_CSR (BOOT_START + 026) /* CSR */ | |
| #define BOOT_LEN (sizeof (boot_rom) / sizeof (int16)) | |
| static const uint16 boot_rom[] = { | |
| 042130, /* "XD" */ | |
| 0012706, BOOT_START, /* MOV #boot_start, SP */ | |
| 0012700, 0000000, /* MOV #unit, R0 ; unit number */ | |
| 0010003, /* MOV R0, R3 */ | |
| 0006303, /* ASL R3 */ | |
| 0006303, /* ASL R3 */ | |
| 0006303, /* ASL R3 */ | |
| 0006303, /* ASL R3 */ | |
| 0012701, 0177170, /* MOV #RXCS, R1 ; csr */ | |
| 0032711, 0000040, /* BITB #40, (R1) ; ready? */ | |
| 0001775, /* BEQ .-4 */ | |
| 0052703, 0000007, /* BIS #READ+GO, R3 */ | |
| 0010311, /* MOV R3, (R1) ; read & go */ | |
| 0105711, /* TSTB (R1) ; xfr ready? */ | |
| 0100376, /* BPL .-2 */ | |
| 0012761, 0000001, 0000002, /* MOV #1, 2(R1) ; sector */ | |
| 0105711, /* TSTB (R1) ; xfr ready? */ | |
| 0100376, /* BPL .-2 */ | |
| 0012761, 0000001, 0000002, /* MOV #1, 2(R1) ; track */ | |
| 0005003, /* CLR R3 */ | |
| 0032711, 0000040, /* BITB #40, (R1) ; ready? */ | |
| 0001775, /* BEQ .-4 */ | |
| 0012711, 0000003, /* MOV #EMPTY+GO, (R1) ; empty & go */ | |
| 0105711, /* TSTB (R1) ; xfr, done? */ | |
| 0001776, /* BEQ .-2 */ | |
| 0100003, /* BPL .+010 */ | |
| 0116123, 0000002, /* MOVB 2(R1), (R3)+ ; move byte */ | |
| 0000772, /* BR .-012 */ | |
| 0005002, /* CLR R2 */ | |
| 0005003, /* CLR R3 */ | |
| 0012704, BOOT_START+020, /* MOV #START+20, R4 */ | |
| 0005005, /* CLR R5 */ | |
| 0005007 /* CLR R7 */ | |
| }; | |
| t_stat rx_boot (int32 unitno, DEVICE *dptr) | |
| { | |
| size_t i; | |
| extern uint16 *M; | |
| for (i = 0; i < BOOT_LEN; i++) | |
| M[(BOOT_START >> 1) + i] = boot_rom[i]; | |
| M[BOOT_UNIT >> 1] = unitno & RX_M_NUMDR; | |
| M[BOOT_CSR >> 1] = rx_dib.ba & DMASK; | |
| cpu_set_boot (BOOT_ENTRY); | |
| return SCPE_OK; | |
| } |