blob: 0da5f090f456f9f8e379d1bcd5931783e9c9faf5 [file] [log] [blame] [raw]
/* vax630_defs.h: MicroVAX II model-specific definitions file
Copyright (c) 2009-2012, Matt Burke
This module incorporates code from SimH, Copyright (c) 1998-2008, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name(s) of the author(s) shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from the author(s).
08-Nov-12 MB First version
This file covers the KA630 ("Mayflower") Qbus system.
System memory map
0000 0000 - 00FF FFFF main memory
0100 0000 - 1FFF FFFF reserved
2000 0000 - 2000 1FFF Qbus I/O page
2004 0000 - 2004 FFFF ROM space, halt protected
2005 0000 - 2005 FFFF ROM space, halt unprotected
2008 0000 - 2008 000F Local register space
2008 8000 - 2008 FFFF Qbus mapping registers
200B 8000 - 200B 80FF Watch chip registers
3000 0000 - 303F FFFF Qbus memory space
3400 0000 - 3FFF FFFF reserved
*/
#ifdef FULL_VAX /* subset VAX */
#undef FULL_VAX
#endif
#ifndef _VAX_630_DEFS_H_
#define _VAX_630_DEFS_H_ 1
/* Microcode constructs */
#define VAX620_SID (16 << 24) /* system ID */
#define VAX630_SID (8 << 24) /* system ID */
#define CON_HLTPIN 0x0200 /* external CPU halt */
#define CON_PWRUP 0x0300 /* powerup code */
#define CON_HLTINS 0x0600 /* HALT instruction */
#define CON_DBLMCK 0x0500 /* Machine check in machine check */
#define CON_BADPSL 0x4000 /* invalid PSL flag */
#define CON_MAPON 0x8000 /* mapping on flag */
#define MCHK_TBM_P0 0x05 /* PPTE in P0 */
#define MCHK_TBM_P1 0x06 /* PPTE in P1 */
#define MCHK_M0_P0 0x07 /* PPTE in P0 */
#define MCHK_M0_P1 0x08 /* PPTE in P1 */
#define MCHK_INTIPL 0x09 /* invalid ireq */
#define MCHK_READ 0x80 /* read check */
#define MCHK_WRITE 0x82 /* write check */
/* Machine specific IPRs */
#define MT_TBDR 36 /* Translation Buffer Disable */
#define MT_CADR 37 /* Cache Disable Register */
#define MT_MCESR 38 /* Machine Check Error Summary */
#define MT_CAER 39 /* Cache Error Register */
#define MT_CONISP 41 /* Console Saved ISP */
#define MT_CONPC 42 /* Console Saved PC */
#define MT_CONPSL 43 /* Console Saved PSL */
#define MT_SBIFS 48 /* SBI fault status */
#define MT_SBIS 49 /* SBI silo */
#define MT_SBISC 50 /* SBI silo comparator */
#define MT_SBIMT 51 /* SBI maint */
#define MT_SBIER 52 /* SBI error */
#define MT_SBITA 53 /* SBI timeout addr */
#define MT_SBIQC 54 /* SBI timeout clear */
#define MT_IORESET 55 /* I/O Bus Reset */
#define MT_TBDATA 59 /* Translation Buffer Data */
#define MT_MBRK 60 /* microbreak */
#define MT_MAX 63 /* last valid IPR */
/* CPU */
#define CPU_MODEL_MODIFIERS \
{ MTAB_XTD|MTAB_VDV, 0, "MODEL", NULL, \
NULL, &cpu_show_model },
/* Memory */
#define MAXMEMWIDTH 24 /* max mem, std KA655 */
#define MAXMEMSIZE (1 << MAXMEMWIDTH) /* max mem size */
#define MAXMEMWIDTH_X 24 /* max mem, KA655X */
#define MAXMEMSIZE_X (1 << MAXMEMWIDTH_X)
#define INITMEMSIZE (1 << 24) /* initial memory size */
#define MEMSIZE (cpu_unit.capac)
#define ADDR_IS_MEM(x) (((uint32) (x)) < MEMSIZE)
#define MEM_MODIFIERS { UNIT_MSIZE, (1u << 20), NULL, "1M", &cpu_set_size }, \
{ UNIT_MSIZE, (1u << 21), NULL, "2M", &cpu_set_size }, \
{ UNIT_MSIZE, (1u << 22), NULL, "4M", &cpu_set_size }, \
{ UNIT_MSIZE, (1u << 23), NULL, "8M", &cpu_set_size }, \
{ UNIT_MSIZE, (1u << 23) + (1u << 22), NULL, "12M", &cpu_set_size }, \
{ UNIT_MSIZE, (1u << 24), NULL, "16M", &cpu_set_size }
/* Qbus I/O page */
#define IOPAGEAWIDTH 13 /* IO addr width */
#define IOPAGESIZE (1u << IOPAGEAWIDTH) /* IO page length */
#define IOPAGEMASK (IOPAGESIZE - 1) /* IO addr mask */
#define IOPAGEBASE 0x20000000 /* IO page base */
#define ADDR_IS_IO(x) ((((uint32) (x)) >= IOPAGEBASE) && \
(((uint32) (x)) < (IOPAGEBASE + IOPAGESIZE)))
/* Read only memory - appears twice */
#define ROMAWIDTH 16 /* ROM addr width */
#define ROMSIZE (1u << ROMAWIDTH) /* ROM length */
#define ROMAMASK (ROMSIZE - 1) /* ROM addr mask */
#define ROMBASE 0x20040000 /* ROM base */
#define ADDR_IS_ROM(x) ((((uint32) (x)) >= ROMBASE) && \
(((uint32) (x)) < (ROMBASE + ROMSIZE + ROMSIZE)))
/* KA630 board registers */
#define KAAWIDTH 4 /* REG addr width */
#define KASIZE (1u << KAAWIDTH) /* REG length */
#define KABASE 0x20080000 /* REG addr base */
/* Qbus map registers */
#define QBMAPAWIDTH 15 /* map addr width */
#define QBMAPSIZE (1u << QBMAPAWIDTH) /* map length */
#define QBMAPAMASK (QBMAPSIZE - 1) /* map addr mask */
#define QBMAPBASE 0x20088000 /* map addr base */
/* Non-volatile RAM - 128 Bytes long */
#define NVRAWIDTH 7 /* NVR addr width */
#define NVRSIZE (1u << NVRAWIDTH) /* NVR length */
#define NVRAMASK (NVRSIZE - 1) /* NVR addr mask */
#define NVRBASE 0x200B8000 /* NVR base */
#define ADDR_IS_NVR(x) ((((uint32) (x)) >= NVRBASE) && \
(((uint32) (x)) < (NVRBASE + NVRSIZE)))
/* Qbus memory space */
#define QBMAWIDTH 22 /* Qmem addr width */
#define QBMSIZE (1u << QBMAWIDTH) /* Qmem length */
#define QBMAMASK (QBMSIZE - 1) /* Qmem addr mask */
#define QBMBASE 0x30000000 /* Qmem base */
#define ADDR_IS_QBM(x) ((((uint32) (x)) >= QBMBASE) && \
(((uint32) (x)) < (QBMBASE + QBMSIZE)))
/* Other address spaces */
#define ADDR_IS_CDG(x) (0)
/* Machine specific reserved operand tests (all NOPs) */
#define ML_PA_TEST(r)
#define ML_LR_TEST(r)
#define ML_SBR_TEST(r)
#define ML_PXBR_TEST(r)
#define LP_AST_TEST(r)
#define LP_MBZ84_TEST(r)
#define LP_MBZ92_TEST(r)
/* Qbus I/O modes */
#define READ 0 /* PDP-11 compatibility */
#define WRITE (L_WORD)
#define WRITEB (L_BYTE)
/* Common CSI flags */
#define CSR_V_GO 0 /* go */
#define CSR_V_IE 6 /* interrupt enable */
#define CSR_V_DONE 7 /* done */
#define CSR_V_BUSY 11 /* busy */
#define CSR_V_ERR 15 /* error */
#define CSR_GO (1u << CSR_V_GO)
#define CSR_IE (1u << CSR_V_IE)
#define CSR_DONE (1u << CSR_V_DONE)
#define CSR_BUSY (1u << CSR_V_BUSY)
#define CSR_ERR (1u << CSR_V_ERR)
/* Timers */
#define TMR_CLK 0 /* 100Hz clock */
/* I/O system definitions */
#define DZ_MUXES 4 /* max # of DZV muxes */
#define DZ_LINES 4 /* lines per DZV mux */
#define VH_MUXES 4 /* max # of DHQ muxes */
#define DLX_LINES 16 /* max # of KL11/DL11's */
#define DCX_LINES 16 /* max # of DC11's */
#define MT_MAXFR (1 << 16) /* magtape max rec */
#define AUTO_LNT 34 /* autoconfig ranks */
#define DEV_V_UBUS (DEV_V_UF + 0) /* Unibus */
#define DEV_V_QBUS (DEV_V_UF + 1) /* Qbus */
#define DEV_V_Q18 (DEV_V_UF + 2) /* Qbus, mem <= 256KB */
#define DEV_UBUS (1u << DEV_V_UBUS)
#define DEV_QBUS (1u << DEV_V_QBUS)
#define DEV_Q18 (1u << DEV_V_Q18)
#define UNIBUS FALSE /* 22b only */
#define DEV_RDX 16 /* default device radix */
/* Device information block */
#define VEC_DEVMAX 4 /* max device vec */
typedef struct {
uint32 ba; /* base addr */
uint32 lnt; /* length */
t_stat (*rd)(int32 *dat, int32 ad, int32 md);
t_stat (*wr)(int32 dat, int32 ad, int32 md);
int32 vnum; /* vectors: number */
int32 vloc; /* locator */
int32 vec; /* value */
int32 (*ack[VEC_DEVMAX])(void); /* ack routine */
} DIB;
/* Qbus I/O page layout - see pdp11_ui_lib.c for address layout details */
#define IOBA_AUTO (0) /* Assigned by Auto Configure */
/* The KA620/KA630 maintains 4 separate hardware IPL levels, IPL 17 to IPL 14;
however, DEC Qbus controllers all interrupt on IPL 14
Within each IPL, priority is right to left
*/
/* IPL 17 */
/* IPL 16 */
#define INT_V_CLK 0 /* clock */
/* IPL 15 */
/* IPL 14 - devices through RY are IPL 15 on Unibus systems */
#define INT_V_RQ 0 /* RQDX3 */
#define INT_V_RL 1 /* RLV12/RL02 */
#define INT_V_DZRX 2 /* DZ11 */
#define INT_V_DZTX 3
#define INT_V_TS 4 /* TS11/TSV05 */
#define INT_V_TQ 5 /* TMSCP */
#define INT_V_XQ 6 /* DEQNA/DELQA */
#define INT_V_RY 7 /* RXV21 */
#define INT_V_TTI 8 /* console */
#define INT_V_TTO 9
#define INT_V_PTR 10 /* PC11 */
#define INT_V_PTP 11
#define INT_V_LPT 12 /* LP11 */
#define INT_V_CSI 13 /* SSC cons UART */
#define INT_V_CSO 14
#define INT_V_TMR0 15 /* SSC timers */
#define INT_V_TMR1 16
#define INT_V_VHRX 17 /* DHQ11 */
#define INT_V_VHTX 18
#define INT_V_QDSS 19 /* QDSS */
#define INT_V_CR 20
#define INT_V_QVSS 21 /* QVSS */
#define INT_V_DMCRX 22
#define INT_V_DMCTX 23
#define INT_CLK (1u << INT_V_CLK)
#define INT_RQ (1u << INT_V_RQ)
#define INT_RL (1u << INT_V_RL)
#define INT_DZRX (1u << INT_V_DZRX)
#define INT_DZTX (1u << INT_V_DZTX)
#define INT_TS (1u << INT_V_TS)
#define INT_TQ (1u << INT_V_TQ)
#define INT_XQ (1u << INT_V_XQ)
#define INT_RY (1u << INT_V_RY)
#define INT_TTI (1u << INT_V_TTI)
#define INT_TTO (1u << INT_V_TTO)
#define INT_PTR (1u << INT_V_PTR)
#define INT_PTP (1u << INT_V_PTP)
#define INT_LPT (1u << INT_V_LPT)
#define INT_CSI (1u << INT_V_CSI)
#define INT_CSO (1u << INT_V_CSO)
#define INT_TMR0 (1u << INT_V_TMR0)
#define INT_TMR1 (1u << INT_V_TMR1)
#define INT_VHRX (1u << INT_V_VHRX)
#define INT_VHTX (1u << INT_V_VHTX)
#define INT_QDSS (1u << INT_V_QDSS)
#define INT_CR (1u << INT_V_CR)
#define INT_QVSS (1u << INT_V_QVSS)
#define INT_DMCRX (1u << INT_V_DMCRX)
#define INT_DMCTX (1u << INT_V_DMCTX)
#define IPL_CLK (0x16 - IPL_HMIN) /* relative IPL */
#define IPL_RQ (0x14 - IPL_HMIN)
#define IPL_RL (0x14 - IPL_HMIN)
#define IPL_DZRX (0x14 - IPL_HMIN)
#define IPL_DZTX (0x14 - IPL_HMIN)
#define IPL_TS (0x14 - IPL_HMIN)
#define IPL_TQ (0x14 - IPL_HMIN)
#define IPL_XQ (0x14 - IPL_HMIN)
#define IPL_RY (0x14 - IPL_HMIN)
#define IPL_TTI (0x14 - IPL_HMIN)
#define IPL_TTO (0x14 - IPL_HMIN)
#define IPL_PTR (0x14 - IPL_HMIN)
#define IPL_PTP (0x14 - IPL_HMIN)
#define IPL_LPT (0x14 - IPL_HMIN)
#define IPL_CSI (0x14 - IPL_HMIN)
#define IPL_CSO (0x14 - IPL_HMIN)
#define IPL_TMR0 (0x14 - IPL_HMIN)
#define IPL_TMR1 (0x14 - IPL_HMIN)
#define IPL_VHRX (0x14 - IPL_HMIN)
#define IPL_VHTX (0x14 - IPL_HMIN)
#define IPL_QDSS (0x14 - IPL_HMIN)
#define IPL_CR (0x14 - IPL_HMIN)
#define IPL_QVSS (0x14 - IPL_HMIN)
#define IPL_DMCRX (0x15 - IPL_HMIN)
#define IPL_DMCTX (0x15 - IPL_HMIN)
#define IPL_HMAX 0x17 /* highest hwre level */
#define IPL_HMIN 0x14 /* lowest hwre level */
#define IPL_HLVL (IPL_HMAX - IPL_HMIN + 1) /* # hardware levels */
#define IPL_SMAX 0xF /* highest swre level */
/* Device vectors */
#define VEC_AUTO (0) /* Assigned by Auto Configure */
#define VEC_FLOAT (0) /* Assigned by Auto Configure */
#define VEC_QBUS 1 /* Qbus system */
#define VEC_Q 0x200 /* Qbus vector offset */
/* Interrupt macros */
#define IVCL(dv) ((IPL_##dv * 32) + INT_V_##dv)
#define IREQ(dv) int_req[IPL_##dv]
#define SET_INT(dv) int_req[IPL_##dv] = int_req[IPL_##dv] | (INT_##dv)
#define CLR_INT(dv) int_req[IPL_##dv] = int_req[IPL_##dv] & ~(INT_##dv)
#define IORETURN(f,v) ((f)? (v): SCPE_OK) /* cond error return */
/* Logging */
#define LOG_CPU_I 0x1 /* intexc */
#define LOG_CPU_R 0x2 /* REI */
#define LOG_CPU_P 0x4 /* context */
/* Function prototypes for virtual memory interface */
int32 Read (uint32 va, int32 lnt, int32 acc);
void Write (uint32 va, int32 val, int32 lnt, int32 acc);
/* Function prototypes for physical memory interface (inlined) */
SIM_INLINE int32 ReadB (uint32 pa);
SIM_INLINE int32 ReadW (uint32 pa);
SIM_INLINE int32 ReadL (uint32 pa);
SIM_INLINE int32 ReadLP (uint32 pa);
SIM_INLINE void WriteB (uint32 pa, int32 val);
SIM_INLINE void WriteW (uint32 pa, int32 val);
SIM_INLINE void WriteL (uint32 pa, int32 val);
void WriteLP (uint32 pa, int32 val);
/* Function prototypes for I/O */
int32 Map_ReadB (uint32 ba, int32 bc, uint8 *buf);
int32 Map_ReadW (uint32 ba, int32 bc, uint16 *buf);
int32 Map_WriteB (uint32 ba, int32 bc, uint8 *buf);
int32 Map_WriteW (uint32 ba, int32 bc, uint16 *buf);
int32 clk_cosched (int32 wait);
t_stat cpu_show_model (FILE *st, UNIT *uptr, int32 val, void *desc);
#include "pdp11_io_lib.h"
#endif