/* pdp11_pt.c: PC11 paper tape reader/punch simulator | |
Copyright (c) 1993-2008, Robert M Supnik | |
Permission is hereby granted, free of charge, to any person obtaining a | |
copy of this software and associated documentation files (the "Software"), | |
to deal in the Software without restriction, including without limitation | |
the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
and/or sell copies of the Software, and to permit persons to whom the | |
Software is furnished to do so, subject to the following conditions: | |
The above copyright notice and this permission notice shall be included in | |
all copies or substantial portions of the Software. | |
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
Except as contained in this notice, the name of Robert M Supnik shall not be | |
used in advertising or otherwise to promote the sale, use or other dealings | |
in this Software without prior written authorization from Robert M Supnik. | |
ptr paper tape reader | |
ptp paper tape punch | |
07-Jul-05 RMS Removed extraneous externs | |
19-May-03 RMS Revised for new conditional compilation scheme | |
25-Apr-03 RMS Revised for extended file support | |
12-Sep-02 RMS Split off from pdp11_stddev.c | |
*/ | |
#if defined (VM_PDP10) /* PDP10 version */ | |
#include "pdp10_defs.h" | |
#define PT_DIS DEV_DIS | |
extern int32 int_req; | |
#elif defined (VM_VAX) /* VAX version */ | |
#include "vax_defs.h" | |
#define PT_DIS DEV_DIS | |
extern int32 int_req[IPL_HLVL]; | |
#else /* PDP-11 version */ | |
#include "pdp11_defs.h" | |
#define PT_DIS 0 | |
extern int32 int_req[IPL_HLVL]; | |
#endif | |
#define PTRCSR_IMP (CSR_ERR+CSR_BUSY+CSR_DONE+CSR_IE) /* paper tape reader */ | |
#define PTRCSR_RW (CSR_IE) | |
#define PTPCSR_IMP (CSR_ERR + CSR_DONE + CSR_IE) /* paper tape punch */ | |
#define PTPCSR_RW (CSR_IE) | |
int32 ptr_csr = 0; /* control/status */ | |
int32 ptr_stopioe = 0; /* stop on error */ | |
int32 ptp_csr = 0; /* control/status */ | |
int32 ptp_stopioe = 0; /* stop on error */ | |
DEVICE ptr_dev, ptp_dev; | |
t_stat ptr_rd (int32 *data, int32 PA, int32 access); | |
t_stat ptr_wr (int32 data, int32 PA, int32 access); | |
t_stat ptr_svc (UNIT *uptr); | |
t_stat ptr_reset (DEVICE *dptr); | |
t_stat ptr_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
char *ptr_description (DEVICE *dptr); | |
t_stat ptr_attach (UNIT *uptr, char *ptr); | |
t_stat ptr_detach (UNIT *uptr); | |
t_stat ptp_rd (int32 *data, int32 PA, int32 access); | |
t_stat ptp_wr (int32 data, int32 PA, int32 access); | |
t_stat ptp_svc (UNIT *uptr); | |
t_stat ptp_reset (DEVICE *dptr); | |
t_stat ptp_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr); | |
char *ptp_description (DEVICE *dptr); | |
t_stat ptp_attach (UNIT *uptr, char *ptr); | |
t_stat ptp_detach (UNIT *uptr); | |
/* PTR data structures | |
ptr_dev PTR device descriptor | |
ptr_unit PTR unit descriptor | |
ptr_reg PTR register list | |
*/ | |
#define IOLN_PTR 004 | |
DIB ptr_dib = { | |
IOBA_AUTO, IOLN_PTR, &ptr_rd, &ptr_wr, | |
1, IVCL (PTR), VEC_AUTO, { NULL } | |
}; | |
UNIT ptr_unit = { | |
UDATA (&ptr_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_ROABLE, 0), | |
SERIAL_IN_WAIT | |
}; | |
REG ptr_reg[] = { | |
{ GRDATAD (BUF, ptr_unit.buf, DEV_RDX, 8, 0, "last data item processed") }, | |
{ GRDATAD (CSR, ptr_csr, DEV_RDX, 16, 0, "control/status register") }, | |
{ FLDATAD (INT, int_req, INT_V_PTR, "interrupt pending flag") }, | |
{ FLDATAD (ERR, ptr_csr, CSR_V_ERR, "error flag (CSR<15>)") }, | |
{ FLDATAD (BUSY, ptr_csr, CSR_V_BUSY, "busy flag (CSR<11>)") }, | |
{ FLDATAD (DONE, ptr_csr, CSR_V_DONE, "device done flag (CSR<7>)") }, | |
{ FLDATAD (IE, ptr_csr, CSR_V_IE, "interrupt enable flag (CSR<6>)") }, | |
{ DRDATAD (POS, ptr_unit.pos, T_ADDR_W, "position in the input file"), PV_LEFT }, | |
{ DRDATAD (TIME, ptr_unit.wait, 24, "time from I/O initiation to interrupt"), PV_LEFT }, | |
{ FLDATAD (STOP_IOE, ptr_stopioe, 0, "stop on I/O error") }, | |
{ FLDATA (DEVDIS, ptr_dev.flags, DEV_V_DIS), REG_HRO }, | |
{ GRDATA (DEVADDR, ptr_dib.ba, DEV_RDX, 32, 0), REG_HRO }, | |
{ GRDATA (DEVVEC, ptr_dib.vec, DEV_RDX, 16, 0), REG_HRO }, | |
{ NULL } | |
}; | |
MTAB ptr_mod[] = { | |
{ MTAB_XTD|MTAB_VDV, 0, "ADDRESS", NULL, | |
NULL, &show_addr, NULL }, | |
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL, | |
NULL, &show_vec, NULL }, | |
{ 0 } | |
}; | |
DEVICE ptr_dev = { | |
"PTR", &ptr_unit, ptr_reg, ptr_mod, | |
1, 10, 31, 1, DEV_RDX, 8, | |
NULL, NULL, &ptr_reset, | |
NULL, &ptr_attach, &ptr_detach, | |
&ptr_dib, DEV_DISABLE | PT_DIS | DEV_UBUS | DEV_QBUS, 0, | |
NULL, NULL, NULL, &ptr_help, NULL, NULL, | |
&ptr_description | |
}; | |
/* PTP data structures | |
ptp_dev PTP device descriptor | |
ptp_unit PTP unit descriptor | |
ptp_reg PTP register list | |
*/ | |
#define IOLN_PTP 004 | |
DIB ptp_dib = { | |
IOBA_AUTO, IOLN_PTP, &ptp_rd, &ptp_wr, | |
1, IVCL (PTP), VEC_AUTO, { NULL } | |
}; | |
UNIT ptp_unit = { | |
UDATA (&ptp_svc, UNIT_SEQ+UNIT_ATTABLE, 0), SERIAL_OUT_WAIT | |
}; | |
REG ptp_reg[] = { | |
{ GRDATAD (BUF, ptp_unit.buf, DEV_RDX, 8, 0, "last data item processed") }, | |
{ GRDATAD (CSR, ptp_csr, DEV_RDX, 16, 0, "control/status register") }, | |
{ FLDATAD (INT, int_req, INT_V_PTP, "interrupt pending flag") }, | |
{ FLDATAD (ERR, ptp_csr, CSR_V_ERR, "error flag (CSR<15>)") }, | |
{ FLDATAD (DONE, ptp_csr, CSR_V_DONE, "device done flag (CSR<7>)") }, | |
{ FLDATAD (IE, ptp_csr, CSR_V_IE, "interrupt enable flag (CSR<6>)") }, | |
{ DRDATAD (POS, ptp_unit.pos, T_ADDR_W, "position in the output file"), PV_LEFT }, | |
{ DRDATAD (TIME, ptp_unit.wait, 24, "time from I/O initiation to interrupt"), PV_LEFT }, | |
{ FLDATAD (STOP_IOE, ptp_stopioe, 0, "stop on I/O error") }, | |
{ GRDATA (DEVADDR, ptp_dib.ba, DEV_RDX, 32, 0), REG_HRO }, | |
{ GRDATA (DEVVEC, ptp_dib.vec, DEV_RDX, 16, 0), REG_HRO }, | |
{ NULL } | |
}; | |
MTAB ptp_mod[] = { | |
{ MTAB_XTD|MTAB_VDV, 0, "ADDRESS", NULL, | |
NULL, &show_addr, NULL }, | |
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL, | |
NULL, &show_vec, NULL }, | |
{ 0 } | |
}; | |
DEVICE ptp_dev = { | |
"PTP", &ptp_unit, ptp_reg, ptp_mod, | |
1, 10, 31, 1, DEV_RDX, 8, | |
NULL, NULL, &ptp_reset, | |
NULL, &ptp_attach, &ptp_detach, | |
&ptp_dib, DEV_DISABLE | PT_DIS | DEV_UBUS | DEV_QBUS, 0, | |
NULL, NULL, NULL, &ptp_help, NULL, NULL, | |
&ptp_description | |
}; | |
/* Paper tape reader I/O address routines */ | |
t_stat ptr_rd (int32 *data, int32 PA, int32 access) | |
{ | |
switch ((PA >> 1) & 01) { /* decode PA<1> */ | |
case 0: /* ptr csr */ | |
*data = ptr_csr & PTRCSR_IMP; | |
return SCPE_OK; | |
case 1: /* ptr buf */ | |
ptr_csr = ptr_csr & ~CSR_DONE; | |
CLR_INT (PTR); | |
*data = ptr_unit.buf & 0377; | |
return SCPE_OK; | |
} | |
return SCPE_NXM; /* can't get here */ | |
} | |
t_stat ptr_wr (int32 data, int32 PA, int32 access) | |
{ | |
switch ((PA >> 1) & 01) { /* decode PA<1> */ | |
case 0: /* ptr csr */ | |
if (PA & 1) | |
return SCPE_OK; | |
if ((data & CSR_IE) == 0) | |
CLR_INT (PTR); | |
else if (((ptr_csr & CSR_IE) == 0) && (ptr_csr & (CSR_ERR | CSR_DONE))) | |
SET_INT (PTR); | |
if (data & CSR_GO) { | |
ptr_csr = (ptr_csr & ~CSR_DONE) | CSR_BUSY; | |
CLR_INT (PTR); | |
if (ptr_unit.flags & UNIT_ATT) /* data to read? */ | |
sim_activate (&ptr_unit, ptr_unit.wait); | |
else sim_activate (&ptr_unit, 0); /* error if not */ | |
} | |
ptr_csr = (ptr_csr & ~PTRCSR_RW) | (data & PTRCSR_RW); | |
return SCPE_OK; | |
case 1: /* ptr buf */ | |
return SCPE_OK; | |
} /* end switch PA */ | |
return SCPE_NXM; /* can't get here */ | |
} | |
/* Paper tape reader service */ | |
t_stat ptr_svc (UNIT *uptr) | |
{ | |
int32 temp; | |
ptr_csr = (ptr_csr | CSR_ERR) & ~CSR_BUSY; | |
if (ptr_csr & CSR_IE) SET_INT (PTR); | |
if ((ptr_unit.flags & UNIT_ATT) == 0) | |
return IORETURN (ptr_stopioe, SCPE_UNATT); | |
if ((temp = getc (ptr_unit.fileref)) == EOF) { | |
if (feof (ptr_unit.fileref)) { | |
if (ptr_stopioe) | |
printf ("PTR end of file\n"); | |
else return SCPE_OK; | |
} | |
else perror ("PTR I/O error"); | |
clearerr (ptr_unit.fileref); | |
return SCPE_IOERR; | |
} | |
ptr_csr = (ptr_csr | CSR_DONE) & ~CSR_ERR; | |
ptr_unit.buf = temp & 0377; | |
ptr_unit.pos = ptr_unit.pos + 1; | |
return SCPE_OK; | |
} | |
/* Paper tape reader support routines */ | |
t_stat ptr_reset (DEVICE *dptr) | |
{ | |
ptr_unit.buf = 0; | |
ptr_csr = 0; | |
if ((ptr_unit.flags & UNIT_ATT) == 0) | |
ptr_csr = ptr_csr | CSR_ERR; | |
CLR_INT (PTR); | |
sim_cancel (&ptr_unit); | |
return auto_config (dptr->name, 1); | |
} | |
t_stat ptr_attach (UNIT *uptr, char *cptr) | |
{ | |
t_stat reason; | |
reason = attach_unit (uptr, cptr); | |
if ((ptr_unit.flags & UNIT_ATT) == 0) | |
ptr_csr = ptr_csr | CSR_ERR; | |
else ptr_csr = ptr_csr & ~CSR_ERR; | |
return reason; | |
} | |
t_stat ptr_detach (UNIT *uptr) | |
{ | |
ptr_csr = ptr_csr | CSR_ERR; | |
return detach_unit (uptr); | |
} | |
/* Paper tape punch I/O address routines */ | |
t_stat ptp_rd (int32 *data, int32 PA, int32 access) | |
{ | |
switch ((PA >> 1) & 01) { /* decode PA<1> */ | |
case 0: /* ptp csr */ | |
*data = ptp_csr & PTPCSR_IMP; | |
return SCPE_OK; | |
case 1: /* ptp buf */ | |
*data = ptp_unit.buf; | |
return SCPE_OK; | |
} | |
return SCPE_NXM; /* can't get here */ | |
} | |
t_stat ptp_wr (int32 data, int32 PA, int32 access) | |
{ | |
switch ((PA >> 1) & 01) { /* decode PA<1> */ | |
case 0: /* ptp csr */ | |
if (PA & 1) | |
return SCPE_OK; | |
if ((data & CSR_IE) == 0) | |
CLR_INT (PTP); | |
else if (((ptp_csr & CSR_IE) == 0) && (ptp_csr & (CSR_ERR | CSR_DONE))) | |
SET_INT (PTP); | |
ptp_csr = (ptp_csr & ~PTPCSR_RW) | (data & PTPCSR_RW); | |
return SCPE_OK; | |
case 1: /* ptp buf */ | |
if ((PA & 1) == 0) | |
ptp_unit.buf = data & 0377; | |
ptp_csr = ptp_csr & ~CSR_DONE; | |
CLR_INT (PTP); | |
if (ptp_unit.flags & UNIT_ATT) /* file to write? */ | |
sim_activate (&ptp_unit, ptp_unit.wait); | |
else sim_activate (&ptp_unit, 0); /* error if not */ | |
return SCPE_OK; | |
} /* end switch PA */ | |
return SCPE_NXM; /* can't get here */ | |
} | |
/* Paper tape punch service */ | |
t_stat ptp_svc (UNIT *uptr) | |
{ | |
ptp_csr = ptp_csr | CSR_ERR | CSR_DONE; | |
if (ptp_csr & CSR_IE) | |
SET_INT (PTP); | |
if ((ptp_unit.flags & UNIT_ATT) == 0) | |
return IORETURN (ptp_stopioe, SCPE_UNATT); | |
if (putc (ptp_unit.buf, ptp_unit.fileref) == EOF) { | |
perror ("PTP I/O error"); | |
clearerr (ptp_unit.fileref); | |
return SCPE_IOERR; | |
} | |
ptp_csr = ptp_csr & ~CSR_ERR; | |
ptp_unit.pos = ptp_unit.pos + 1; | |
return SCPE_OK; | |
} | |
/* Paper tape punch support routines */ | |
t_stat ptp_reset (DEVICE *dptr) | |
{ | |
ptp_unit.buf = 0; | |
ptp_csr = CSR_DONE; | |
if ((ptp_unit.flags & UNIT_ATT) == 0) | |
ptp_csr = ptp_csr | CSR_ERR; | |
CLR_INT (PTP); | |
sim_cancel (&ptp_unit); /* deactivate unit */ | |
return auto_config (dptr->name, 1); | |
} | |
t_stat ptp_attach (UNIT *uptr, char *cptr) | |
{ | |
t_stat reason; | |
reason = attach_unit (uptr, cptr); | |
if ((ptp_unit.flags & UNIT_ATT) == 0) | |
ptp_csr = ptp_csr | CSR_ERR; | |
else ptp_csr = ptp_csr & ~CSR_ERR; | |
return reason; | |
} | |
t_stat ptp_detach (UNIT *uptr) | |
{ | |
ptp_csr = ptp_csr | CSR_ERR; | |
return detach_unit (uptr); | |
} | |
t_stat ptr_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
fprintf (st, "PC11 Paper Tape Reader (PTR)\n\n"); | |
fprintf (st, "The paper tape reader (PTR) reads data from a disk file. The POS register\n"); | |
fprintf (st, "specifies the number of the next data item to be read. Thus, by changing\n"); | |
fprintf (st, "POS, the user can backspace or advance the reader.\n"); | |
fprint_set_help (st, dptr); | |
fprint_show_help (st, dptr); | |
fprint_reg_help (st, dptr); | |
fprintf (st, "\nError handling is as follows:\n\n"); | |
fprintf (st, " error STOP_IOE processed as\n"); | |
fprintf (st, " not attached 1 report error and stop\n"); | |
fprintf (st, " 0 out of tape\n\n"); | |
fprintf (st, " end of file 1 report error and stop\n"); | |
fprintf (st, " 0 out of tape\n"); | |
fprintf (st, " OS I/O error x report error and stop\n"); | |
return SCPE_OK; | |
} | |
char *ptr_description (DEVICE *dptr) | |
{ | |
return "PC11 paper tape reader"; | |
} | |
t_stat ptp_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, char *cptr) | |
{ | |
fprintf (st, "PC11 Paper Tape Punch (PTP)\n\n"); | |
fprintf (st, "The paper tape punch (PTP) writes data to a disk file. The POS register\n"); | |
fprintf (st, "specifies the number of the next data item to be written. Thus, by changing\n"); | |
fprintf (st, "POS, the user can backspace or advance the punch.\n"); | |
fprint_set_help (st, dptr); | |
fprint_show_help (st, dptr); | |
fprint_reg_help (st, dptr); | |
fprintf (st, "\nError handling is as follows:\n\n"); | |
fprintf (st, " error STOP_IOE processed as\n"); | |
fprintf (st, " not attached 1 report error and stop\n"); | |
fprintf (st, " 0 out of tape\n\n"); | |
fprintf (st, " OS I/O error x report error and stop\n"); | |
return SCPE_OK; | |
} | |
char *ptp_description (DEVICE *dptr) | |
{ | |
return "PC11 paper tape punch"; | |
} |