| /* vax_stddev.c: VAX 3900 standard I/O devices | |
| Copyright (c) 1998-2012, Robert M Supnik | |
| Permission is hereby granted, free of charge, to any person obtaining a | |
| copy of this software and associated documentation files (the "Software"), | |
| to deal in the Software without restriction, including without limitation | |
| the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| and/or sell copies of the Software, and to permit persons to whom the | |
| Software is furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be included in | |
| all copies or substantial portions of the Software. | |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| Except as contained in this notice, the name of Robert M Supnik shall not be | |
| used in advertising or otherwise to promote the sale, use or other dealings | |
| in this Software without prior written authorization from Robert M Supnik. | |
| tti terminal input | |
| tto terminal output | |
| clk 100Hz and TODR clock | |
| 18-Apr-12 RMS Revised TTI to use clock coscheduling and | |
| remove IORESET bug | |
| 13-Jan-12 MP Normalized the saved format of the TODR persistent | |
| file so that it may be moved around from one platform | |
| to another along with other simulator state files | |
| (disk & tape images, save/restore files, etc.) | |
| 28-Sep-11 MP Generalized setting TODR for all OSes. | |
| Unbound the TODR value from the 100hz clock tick | |
| interrupt. TODR now behaves like the original | |
| battery backed-up clock and runs with the wall | |
| clock, not the simulated instruction clock | |
| (except when running ROM diagnostics). | |
| Two operational modes are available: | |
| - Default VMS mode, which is similar to the previous | |
| behavior in that without initializing the TODR it | |
| would default to the value VMS would set it to if | |
| VMS knew the correct time. This would be correct | |
| almost all the time unless a VMS disk hadn't been | |
| booted from for more than a year. This mode | |
| produces strange time results for non VMS OSes on | |
| each system boot. | |
| - OS Agnostic mode. This mode behaves precisely like | |
| the VAX780 TODR and works correctly for all OSes. | |
| This mode is enabled by attaching the TODR to a | |
| battery backup state file for the TOY clock | |
| (i.e. sim> attach TODR TOY_CLOCK). When operating | |
| in OS Agnostic mode, the TODR will initially start | |
| counting from 0 and be adjusted differently when an | |
| OS specifically writes to the TODR. On the first OS | |
| boot with an attached TODR VMS will prompt to set | |
| the time unless the SYSGEN parameter TIMEPROMPTWAIT | |
| is set to 0. | |
| 05-Jan-11 MP Added Asynch I/O support | |
| 17-Aug-08 RMS Resync TODR on any clock reset | |
| 18-Jun-07 RMS Added UNIT_IDLE flag to console input, clock | |
| 17-Oct-06 RMS Synced keyboard poll to real-time clock for idling | |
| 22-Nov-05 RMS Revised for new terminal processing routines | |
| 09-Sep-04 RMS Integrated powerup into RESET (with -p) | |
| 28-May-04 RMS Removed SET TTI CTRL-C | |
| 29-Dec-03 RMS Added console backpressure support | |
| 25-Apr-03 RMS Revised for extended file support | |
| 02-Mar-02 RMS Added SET TTI CTRL-C | |
| 22-Dec-02 RMS Added console halt capability | |
| 01-Nov-02 RMS Added 7B/8B capability to terminal | |
| 12-Sep-02 RMS Removed paper tape, added variable vector support | |
| 30-May-02 RMS Widened POS to 32b | |
| 30-Apr-02 RMS Automatically set TODR to VMS-correct value during boot | |
| */ | |
| #include "vax_defs.h" | |
| #include "sim_tmxr.h" | |
| #include <time.h> | |
| #define TTICSR_IMP (CSR_DONE + CSR_IE) /* terminal input */ | |
| #define TTICSR_RW (CSR_IE) | |
| #define TTIBUF_ERR 0x8000 /* error */ | |
| #define TTIBUF_OVR 0x4000 /* overrun */ | |
| #define TTIBUF_FRM 0x2000 /* framing error */ | |
| #define TTIBUF_RBR 0x0400 /* receive break */ | |
| #define TTOCSR_IMP (CSR_DONE + CSR_IE) /* terminal output */ | |
| #define TTOCSR_RW (CSR_IE) | |
| #define CLKCSR_IMP (CSR_IE) /* real-time clock */ | |
| #define CLKCSR_RW (CSR_IE) | |
| #define CLK_DELAY 5000 /* 100 Hz */ | |
| #define TMXR_MULT 1 /* 100 Hz */ | |
| int32 tti_csr = 0; /* control/status */ | |
| uint32 tti_buftime; /* time input character arrived */ | |
| int32 tto_csr = 0; /* control/status */ | |
| int32 clk_csr = 0; /* control/status */ | |
| int32 clk_tps = 100; /* ticks/second */ | |
| int32 todr_reg = 0; /* TODR register */ | |
| int32 todr_blow = 1; /* TODR battery low */ | |
| struct todr_battery_info { | |
| uint32 toy_gmtbase; /* GMT base of set value */ | |
| uint32 toy_gmtbasemsec; /* The milliseconds of the set value */ | |
| uint32 toy_endian_plus2; /* 2 -> Big Endian, 3 -> Little Endian, invalid otherwise */ | |
| }; | |
| typedef struct todr_battery_info TOY; | |
| int32 tmxr_poll = CLK_DELAY * TMXR_MULT; /* term mux poll */ | |
| int32 tmr_poll = CLK_DELAY; /* pgm timer poll */ | |
| t_stat tti_svc (UNIT *uptr); | |
| t_stat tto_svc (UNIT *uptr); | |
| t_stat clk_svc (UNIT *uptr); | |
| t_stat tti_reset (DEVICE *dptr); | |
| t_stat tto_reset (DEVICE *dptr); | |
| t_stat clk_reset (DEVICE *dptr); | |
| t_stat clk_attach (UNIT *uptr, CONST char *cptr); | |
| t_stat clk_detach (UNIT *uptr); | |
| t_stat todr_resync (void); | |
| const char *tti_description (DEVICE *dptr); | |
| const char *tto_description (DEVICE *dptr); | |
| const char *clk_description (DEVICE *dptr); | |
| t_stat tti_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr); | |
| t_stat tto_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr); | |
| t_stat clk_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr); | |
| extern int32 sysd_hlt_enb (void); | |
| extern int32 fault_PC; | |
| /* TTI data structures | |
| tti_dev TTI device descriptor | |
| tti_unit TTI unit descriptor | |
| tti_reg TTI register list | |
| */ | |
| DIB tti_dib = { 0, 0, NULL, NULL, 1, IVCL (TTI), SCB_TTI, { NULL } }; | |
| UNIT tti_unit = { UDATA (&tti_svc, UNIT_IDLE|TT_MODE_8B, 0), TMLN_SPD_9600_BPS }; | |
| REG tti_reg[] = { | |
| { HRDATAD (BUF, tti_unit.buf, 16, "last data item processed") }, | |
| { HRDATAD (CSR, tti_csr, 16, "control/status register") }, | |
| { FLDATAD (INT, int_req[IPL_TTI], INT_V_TTI, "interrupt pending flag") }, | |
| { FLDATAD (ERR, tti_csr, CSR_V_ERR, "error flag (CSR<15>)") }, | |
| { FLDATAD (DONE, tti_csr, CSR_V_DONE, "device done flag (CSR<7>)") }, | |
| { FLDATAD (IE, tti_csr, CSR_V_IE, "interrupt enable flag (CSR<6>)") }, | |
| { DRDATAD (POS, tti_unit.pos, T_ADDR_W, "number of characters input"), PV_LEFT }, | |
| { DRDATAD (TIME, tti_unit.wait, 24, "input polling interval"), PV_LEFT }, | |
| { NULL } | |
| }; | |
| MTAB tti_mod[] = { | |
| { TT_MODE, TT_MODE_7B, "7b", "7B", NULL, NULL, NULL, "Set 7 bit mode" }, | |
| { TT_MODE, TT_MODE_8B, "8b", "8B", NULL, NULL, NULL, "Set 8 bit mode" }, | |
| { MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL, NULL, &show_vec, NULL, "Display interrupt vector" }, | |
| { 0 } | |
| }; | |
| DEVICE tti_dev = { | |
| "TTI", &tti_unit, tti_reg, tti_mod, | |
| 1, 10, 31, 1, 16, 8, | |
| NULL, NULL, &tti_reset, | |
| NULL, NULL, NULL, | |
| &tti_dib, 0, 0, NULL, NULL, NULL, &tti_help, NULL, NULL, | |
| &tti_description | |
| }; | |
| /* TTO data structures | |
| tto_dev TTO device descriptor | |
| tto_unit TTO unit descriptor | |
| tto_reg TTO register list | |
| */ | |
| DIB tto_dib = { 0, 0, NULL, NULL, 1, IVCL (TTO), SCB_TTO, { NULL } }; | |
| UNIT tto_unit = { UDATA (&tto_svc, TT_MODE_8B, 0), SERIAL_OUT_WAIT }; | |
| REG tto_reg[] = { | |
| { HRDATAD (BUF, tto_unit.buf, 8, "last data item processed") }, | |
| { HRDATAD (CSR, tto_csr, 16, "control/status register") }, | |
| { FLDATAD (INT, int_req[IPL_TTO], INT_V_TTO, "interrupt pending flag") }, | |
| { FLDATAD (ERR, tto_csr, CSR_V_ERR, "error flag (CSR<15>)") }, | |
| { FLDATAD (DONE, tto_csr, CSR_V_DONE, "device done flag (CSR<7>)") }, | |
| { FLDATAD (IE, tto_csr, CSR_V_IE, "interrupt enable flag (CSR<6>)") }, | |
| { DRDATAD (POS, tto_unit.pos, T_ADDR_W, "number of characters input"), PV_LEFT }, | |
| { DRDATAD (TIME, tto_unit.wait, 24, "time from I/O initiation to interrupt"), PV_LEFT }, | |
| { NULL } | |
| }; | |
| MTAB tto_mod[] = { | |
| { TT_MODE, TT_MODE_7B, "7b", "7B", NULL, NULL, NULL, "Set 7 bit mode" }, | |
| { TT_MODE, TT_MODE_8B, "8b", "8B", NULL, NULL, NULL, "Set 8 bit mode" }, | |
| { TT_MODE, TT_MODE_7P, "7p", "7P", NULL, NULL, NULL, "Set 7 bit mode (suppress non printing output)" }, | |
| { MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL, NULL, &show_vec, NULL, "Display interrupt vector" }, | |
| { 0 } | |
| }; | |
| DEVICE tto_dev = { | |
| "TTO", &tto_unit, tto_reg, tto_mod, | |
| 1, 10, 31, 1, 16, 8, | |
| NULL, NULL, &tto_reset, | |
| NULL, NULL, NULL, | |
| &tto_dib, 0, 0, NULL, NULL, NULL, &tto_help, NULL, NULL, | |
| &tto_description | |
| }; | |
| /* CLK data structures | |
| clk_dev CLK device descriptor | |
| clk_unit CLK unit descriptor | |
| clk_reg CLK register list | |
| */ | |
| DIB clk_dib = { 0, 0, NULL, NULL, 1, IVCL (CLK), SCB_INTTIM, { NULL } }; | |
| UNIT clk_unit = { UDATA (&clk_svc, UNIT_IDLE+UNIT_FIX, sizeof(TOY)), CLK_DELAY };/* 100Hz */ | |
| REG clk_reg[] = { | |
| { HRDATAD (CSR, clk_csr, 16, "control/status register") }, | |
| { FLDATAD (INT, int_req[IPL_CLK], INT_V_CLK, "interrupt pending flag") }, | |
| { FLDATAD (IE, clk_csr, CSR_V_IE, "interrupt enable flag (CSR<6>)") }, | |
| { DRDATAD (TODR, todr_reg, 32, "time-of-day register"), PV_LEFT }, | |
| { FLDATAD (BLOW, todr_blow, 0, "TODR battery low indicator") }, | |
| { DRDATAD (TIME, clk_unit.wait, 24, "initial poll interval"), REG_NZ + PV_LEFT }, | |
| { DRDATAD (POLL, tmr_poll, 24, "calibrated poll interval"), REG_NZ + PV_LEFT + REG_HRO }, | |
| { DRDATAD (TPS, clk_tps, 8, "ticks per second (100)"), REG_NZ + PV_LEFT }, | |
| #if defined (SIM_ASYNCH_IO) | |
| { DRDATAD (ASYNCH, sim_asynch_enabled, 1, "asynch I/O enabled flag"), PV_LEFT }, | |
| { DRDATAD (LATENCY, sim_asynch_latency, 32, "desired asynch interrupt latency"), PV_LEFT }, | |
| { DRDATAD (INST_LATENCY, sim_asynch_inst_latency, 32, "calibrated instruction latency"), PV_LEFT }, | |
| #endif | |
| { NULL } | |
| }; | |
| MTAB clk_mod[] = { | |
| { MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL, NULL, &show_vec, NULL, "Display interrupt vector" }, | |
| { 0 } | |
| }; | |
| #define DBG_REG 1 /* TODR register access */ | |
| #define DBG_TIC 2 /* clock ticks */ | |
| DEBTAB clk_debug[] = { | |
| {"REG", DBG_REG, "TODR register access"}, | |
| {"TIC", DBG_TIC, "clock ticks"}, | |
| {0} | |
| }; | |
| DEVICE clk_dev = { | |
| "CLK", &clk_unit, clk_reg, clk_mod, | |
| 1, 0, 8, 4, 0, 32, | |
| NULL, NULL, &clk_reset, | |
| NULL, &clk_attach, &clk_detach, | |
| &clk_dib, DEV_DEBUG, 0, clk_debug, | |
| NULL, NULL, &clk_help, NULL, NULL, | |
| &clk_description | |
| }; | |
| /* Clock and terminal MxPR routines | |
| iccs_rd/wr interval timer | |
| rxcs_rd/wr input control/status | |
| rxdb_rd input buffer | |
| txcs_rd/wr output control/status | |
| txdb_wr output buffer | |
| */ | |
| int32 iccs_rd (void) | |
| { | |
| return (clk_csr & CLKCSR_IMP); | |
| } | |
| int32 rxcs_rd (void) | |
| { | |
| return (tti_csr & TTICSR_IMP); | |
| } | |
| int32 rxdb_rd (void) | |
| { | |
| int32 t = tti_unit.buf; /* char + error */ | |
| if (tti_csr & CSR_DONE) { /* Input pending ? */ | |
| tti_csr = tti_csr & ~CSR_DONE; /* clr done */ | |
| tti_unit.buf = tti_unit.buf & 0377; /* clr errors */ | |
| CLR_INT (TTI); | |
| sim_activate_after_abs (&tti_unit, tti_unit.wait); /* check soon for more input */ | |
| } | |
| return t; | |
| } | |
| int32 txcs_rd (void) | |
| { | |
| return (tto_csr & TTOCSR_IMP); | |
| } | |
| void iccs_wr (int32 data) | |
| { | |
| if ((data & CSR_IE) == 0) | |
| CLR_INT (CLK); | |
| if (data & CSR_DONE) /* Interrupt Acked? */ | |
| sim_rtcn_tick_ack (20, TMR_CLK); /* Let timers know */ | |
| clk_csr = (clk_csr & ~CLKCSR_RW) | (data & CLKCSR_RW); | |
| return; | |
| } | |
| void rxcs_wr (int32 data) | |
| { | |
| if ((data & CSR_IE) == 0) | |
| CLR_INT (TTI); | |
| else if ((tti_csr & (CSR_DONE + CSR_IE)) == CSR_DONE) | |
| SET_INT (TTI); | |
| tti_csr = (tti_csr & ~TTICSR_RW) | (data & TTICSR_RW); | |
| return; | |
| } | |
| void txcs_wr (int32 data) | |
| { | |
| if ((data & CSR_IE) == 0) | |
| CLR_INT (TTO); | |
| else if ((tto_csr & (CSR_DONE + CSR_IE)) == CSR_DONE) | |
| SET_INT (TTO); | |
| tto_csr = (tto_csr & ~TTOCSR_RW) | (data & TTOCSR_RW); | |
| return; | |
| } | |
| void txdb_wr (int32 data) | |
| { | |
| tto_unit.buf = data & 0377; | |
| tto_csr = tto_csr & ~CSR_DONE; | |
| CLR_INT (TTO); | |
| sim_activate (&tto_unit, tto_unit.wait); | |
| return; | |
| } | |
| /* Terminal input routines | |
| tti_svc process event (character ready) | |
| tti_reset process reset | |
| */ | |
| t_stat tti_svc (UNIT *uptr) | |
| { | |
| int32 c; | |
| sim_clock_coschedule_tmr (uptr, TMR_CLK, TMXR_MULT); /* continue poll */ | |
| if ((tti_csr & CSR_DONE) && /* input still pending and < 500ms? */ | |
| ((sim_os_msec () - tti_buftime) < 500)) | |
| return SCPE_OK; | |
| if ((c = sim_poll_kbd ()) < SCPE_KFLAG) /* no char or error? */ | |
| return c; | |
| if (c & SCPE_BREAK) { /* break? */ | |
| if (sysd_hlt_enb ()) /* if enabled, halt */ | |
| hlt_pin = 1; | |
| tti_unit.buf = TTIBUF_ERR | TTIBUF_FRM | TTIBUF_RBR; | |
| } | |
| else tti_unit.buf = sim_tt_inpcvt (c, TT_GET_MODE (uptr->flags)); | |
| tti_buftime = sim_os_msec (); | |
| uptr->pos = uptr->pos + 1; | |
| tti_csr = tti_csr | CSR_DONE; | |
| if (tti_csr & CSR_IE) | |
| SET_INT (TTI); | |
| return SCPE_OK; | |
| } | |
| t_stat tti_reset (DEVICE *dptr) | |
| { | |
| tmxr_set_console_units (&tti_unit, &tto_unit); | |
| tti_unit.buf = 0; | |
| tti_csr = 0; | |
| CLR_INT (TTI); | |
| sim_activate (&tti_unit, KBD_WAIT (tti_unit.wait, tmr_poll)); | |
| return SCPE_OK; | |
| } | |
| t_stat tti_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr) | |
| { | |
| fprintf (st, "Console Terminal Input (TTI)\n\n"); | |
| fprintf (st, "The terminal input (TTI) polls the console keyboard for input.\n\n"); | |
| fprintf (st, "When the console terminal is attached to a Telnet session or the simulator is\n"); | |
| fprintf (st, "running from a Windows command prompt, it recognizes BREAK. If BREAK is\n"); | |
| fprintf (st, "entered, and BDR<7> is set (also known as SET CPU NOAUTOBOOT), control returns\n"); | |
| fprintf (st, "to the console firmware; otherwise, BREAK is treated as a normal terminal\n"); | |
| fprintf (st, "input condition.\n\n"); | |
| fprint_set_help (st, dptr); | |
| fprint_show_help (st, dptr); | |
| fprint_reg_help (st, dptr); | |
| return SCPE_OK; | |
| } | |
| const char *tti_description (DEVICE *dptr) | |
| { | |
| return "console terminal input"; | |
| } | |
| /* Terminal output routines | |
| tto_svc process event (character typed) | |
| tto_reset process reset | |
| */ | |
| t_stat tto_svc (UNIT *uptr) | |
| { | |
| int32 c; | |
| t_stat r; | |
| c = sim_tt_outcvt (tto_unit.buf, TT_GET_MODE (uptr->flags)); | |
| if (c >= 0) { | |
| if ((r = sim_putchar_s (c)) != SCPE_OK) { /* output; error? */ | |
| sim_activate (uptr, uptr->wait); /* retry */ | |
| return ((r == SCPE_STALL)? SCPE_OK: r); /* !stall? report */ | |
| } | |
| } | |
| tto_csr = tto_csr | CSR_DONE; | |
| if (tto_csr & CSR_IE) | |
| SET_INT (TTO); | |
| uptr->pos = uptr->pos + 1; | |
| return SCPE_OK; | |
| } | |
| t_stat tto_reset (DEVICE *dptr) | |
| { | |
| tto_unit.buf = 0; | |
| tto_csr = CSR_DONE; | |
| CLR_INT (TTO); | |
| sim_cancel (&tto_unit); /* deactivate unit */ | |
| return SCPE_OK; | |
| } | |
| t_stat tto_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr) | |
| { | |
| fprintf (st, "Console Terminal Output (TTO)\n\n"); | |
| fprintf (st, "The terminal output (TTO) writes to the simulator console.\n\n"); | |
| fprint_set_help (st, dptr); | |
| fprint_show_help (st, dptr); | |
| fprint_reg_help (st, dptr); | |
| return SCPE_OK; | |
| } | |
| const char *tto_description (DEVICE *dptr) | |
| { | |
| return "console terminal output"; | |
| } | |
| /* Clock routines | |
| clk_svc process event (clock tick) | |
| clk_reset process reset | |
| todr_rd/wr time of year clock | |
| todr_resync powerup for TODR (get date from system) | |
| */ | |
| t_stat clk_svc (UNIT *uptr) | |
| { | |
| int32 t; | |
| if (clk_csr & CSR_IE) | |
| SET_INT (CLK); | |
| t = sim_rtcn_calb (clk_tps, TMR_CLK); /* calibrate clock */ | |
| sim_activate_after (&clk_unit, 1000000/clk_tps); /* reactivate unit */ | |
| tmr_poll = t; /* set tmr poll */ | |
| tmxr_poll = t * TMXR_MULT; /* set mux poll */ | |
| if (!todr_blow && todr_reg) /* if running? */ | |
| todr_reg = todr_reg + 1; /* incr TODR */ | |
| AIO_SET_INTERRUPT_LATENCY(tmr_poll*clk_tps); /* set interrrupt latency */ | |
| return SCPE_OK; | |
| } | |
| int32 todr_rd (void) | |
| { | |
| TOY *toy = (TOY *)clk_unit.filebuf; | |
| struct timespec base, now, val; | |
| if ((fault_PC&0xFFFE0000) == 0x20040000) { /* running from ROM? */ | |
| sim_debug (DBG_REG, &clk_dev, "todr_rd(ROM) - TODR=0x%X\n", todr_reg); | |
| return todr_reg; /* return counted value for ROM diags */ | |
| } | |
| if (0 == todr_reg) { /* clock running? */ | |
| sim_debug (DBG_REG, &clk_dev, "todr_rd(Not Running) - TODR=0x%X\n", todr_reg); | |
| return todr_reg; | |
| } | |
| /* Maximum number of seconds which can be represented as 10ms ticks | |
| in the 32bit TODR. This is the 33bit value 0x100000000/100 to get seconds */ | |
| #define TOY_MAX_SECS (0x40000000/25) | |
| sim_rtcn_get_time(&now, TMR_CLK); /* get curr time */ | |
| base.tv_sec = toy->toy_gmtbase; | |
| base.tv_nsec = toy->toy_gmtbasemsec * 1000000; | |
| sim_timespec_diff (&val, &now, &base); | |
| if (val.tv_sec >= TOY_MAX_SECS) { /* todr overflowed? */ | |
| sim_debug (DBG_REG, &clk_dev, "todr_rd(Overflowed) - TODR=0x%X\n", 0); | |
| return todr_reg = 0; /* stop counting */ | |
| } | |
| sim_debug (DBG_REG, &clk_dev, "todr_rd() - TODR=0x%X\n", (int32)(val.tv_sec*100 + val.tv_nsec/10000000)); | |
| return (int32)(val.tv_sec*100 + val.tv_nsec/10000000); /* 100hz Clock Ticks */ | |
| } | |
| void todr_wr (int32 data) | |
| { | |
| TOY *toy = (TOY *)clk_unit.filebuf; | |
| struct timespec now, val, base; | |
| if (data) { | |
| todr_blow = 0; | |
| /* Save the GMT time when set value is not 0 to record the base for | |
| future read operations in "battery backed-up" state */ | |
| sim_rtcn_get_time(&now, TMR_CLK); /* get curr time */ | |
| val.tv_sec = ((uint32)data) / 100; | |
| val.tv_nsec = (((uint32)data) % 100) * 10000000; | |
| sim_timespec_diff (&base, &now, &val); /* base = now - data */ | |
| toy->toy_gmtbase = (uint32)base.tv_sec; | |
| toy->toy_gmtbasemsec = base.tv_nsec/1000000; | |
| } | |
| else { /* stop the clock */ | |
| toy->toy_gmtbase = 0; | |
| toy->toy_gmtbasemsec = 0; | |
| } | |
| todr_reg = data; | |
| sim_debug (DBG_REG, &clk_dev, "todr_wr(0x%X) - TODR=0x%X blow=%d\n", data, todr_reg, todr_blow); | |
| } | |
| /* TODR resync routine */ | |
| t_stat todr_resync (void) | |
| { | |
| TOY *toy = (TOY *)clk_unit.filebuf; | |
| if (clk_unit.flags & UNIT_ATT) { /* Attached means behave like real VAX780 */ | |
| if (!toy->toy_gmtbase) /* Never set? */ | |
| todr_wr (0); /* Start ticking from 0 */ | |
| } | |
| else { /* Not-Attached means */ | |
| uint32 base; /* behave like simh VMS default */ | |
| time_t curr; | |
| struct tm *ctm; | |
| struct timespec now; | |
| sim_rtcn_get_time(&now, TMR_CLK); /* get curr time */ | |
| curr = (time_t)now.tv_sec; | |
| if (curr == (time_t) -1) /* error? */ | |
| return SCPE_NOFNC; | |
| ctm = localtime (&curr); /* decompose */ | |
| if (ctm == NULL) /* error? */ | |
| return SCPE_NOFNC; | |
| base = (((((ctm->tm_yday * 24) + /* sec since 1-Jan */ | |
| ctm->tm_hour) * 60) + | |
| ctm->tm_min) * 60) + | |
| ctm->tm_sec; | |
| todr_wr ((base * 100) + 0x10000000 + /* use VMS form */ | |
| (int32)(now.tv_nsec / 10000000)); | |
| } | |
| return SCPE_OK; | |
| } | |
| /* Reset routine */ | |
| t_stat clk_reset (DEVICE *dptr) | |
| { | |
| int32 t; | |
| clk_csr = 0; | |
| CLR_INT (CLK); | |
| if (!sim_is_running) { /* RESET (not IORESET)? */ | |
| t = sim_rtcn_init_unit (&clk_unit, clk_unit.wait, TMR_CLK);/* init 100Hz timer */ | |
| sim_activate_after (&clk_unit, 1000000/clk_tps); /* activate 100Hz unit */ | |
| tmr_poll = t; /* set tmr poll */ | |
| tmxr_poll = t * TMXR_MULT; /* set mux poll */ | |
| } | |
| if (clk_unit.filebuf == NULL) { /* make sure the TODR is initialized */ | |
| clk_unit.filebuf = calloc(sizeof(TOY), 1); | |
| if (clk_unit.filebuf == NULL) | |
| return SCPE_MEM; | |
| todr_resync (); | |
| } | |
| return SCPE_OK; | |
| } | |
| t_stat clk_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr) | |
| { | |
| fprintf (st, "Real-Time Clock (%s)\n\n", dptr->name); | |
| fprintf (st, "The real-time clock autocalibrates; the clock interval is adjusted up or down\n"); | |
| fprintf (st, "so that the clock tracks actual elapsed time.\n\n"); | |
| fprintf (st, "There are two modes of TODR operation:\n\n"); | |
| fprintf (st, " Default VMS mode. Without initializing the TODR it returns the current\n"); | |
| fprintf (st, " time of year offset which VMS would set the clock to\n"); | |
| fprintf (st, " if VMS knew the correct time (i.e. by manual input).\n"); | |
| fprintf (st, " This is correct almost all the time unless a VMS disk\n"); | |
| fprintf (st, " hadn't been booted from in the current year. This mode\n"); | |
| fprintf (st, " produces strange time results for non VMS OSes on each\n"); | |
| fprintf (st, " system boot.\n"); | |
| fprintf (st, " OS Agnostic mode. This mode behaves precisely like the VAX780 TODR and\n"); | |
| fprintf (st, " works correctly for all OSes. This mode is enabled by\n"); | |
| fprintf (st, " attaching the %s to a battery backup state file for the\n", dptr->name); | |
| fprintf (st, " TOY clock (i.e. sim> attach %s TOY_CLOCK). When\n", dptr->name); | |
| fprintf (st, " operating in OS Agnostic mode, the TODR will initially\n"); | |
| fprintf (st, " start counting from 0 and be adjusted differently when\n"); | |
| fprintf (st, " an OS specifically writes to the TODR. VMS determines\n"); | |
| fprintf (st, " if the TODR currently contains a valid time if the value\n"); | |
| fprintf (st, " it sees is less than about 1 month. If the time isn't\n"); | |
| fprintf (st, " valid VMS will prompt to set the time during the system\n"); | |
| fprintf (st, " boot. While prompting for the time it will wait for an\n"); | |
| fprintf (st, " answer to the prompt for up to the SYSGEN parameter\n"); | |
| fprintf (st, " TIMEPROMPTWAIT seconds. A value of 0 for TIMEPROMPTWAIT\n"); | |
| fprintf (st, " will disable the clock setting prompt.\n"); | |
| fprint_reg_help (st, dptr); | |
| return SCPE_OK; | |
| } | |
| const char *clk_description (DEVICE *dptr) | |
| { | |
| return "time of year clock"; | |
| } | |
| static uint32 sim_byteswap32 (uint32 data) | |
| { | |
| uint8 *bdata = (uint8 *)&data; | |
| uint8 tmp; | |
| tmp = bdata[0]; | |
| bdata[0] = bdata[3]; | |
| bdata[3] = tmp; | |
| tmp = bdata[1]; | |
| bdata[1] = bdata[2]; | |
| bdata[2] = tmp; | |
| return data; | |
| } | |
| /* CLK attach */ | |
| t_stat clk_attach (UNIT *uptr, CONST char *cptr) | |
| { | |
| t_stat r; | |
| uptr->flags = uptr->flags | (UNIT_ATTABLE | UNIT_BUFABLE); | |
| memset (uptr->filebuf, 0, (size_t)uptr->capac); | |
| r = attach_unit (uptr, cptr); | |
| if (r != SCPE_OK) | |
| uptr->flags = uptr->flags & ~(UNIT_ATTABLE | UNIT_BUFABLE); | |
| else { | |
| TOY *toy = (TOY *)uptr->filebuf; | |
| uptr->hwmark = (uint32) uptr->capac; | |
| if ((toy->toy_endian_plus2 < 2) || (toy->toy_endian_plus2 > 3)) | |
| memset (uptr->filebuf, 0, (size_t)uptr->capac); | |
| else { | |
| if (toy->toy_endian_plus2 != sim_end + 2) { /* wrong endian? */ | |
| toy->toy_gmtbase = sim_byteswap32 (toy->toy_gmtbase); | |
| toy->toy_gmtbasemsec = sim_byteswap32 (toy->toy_gmtbasemsec); | |
| } | |
| } | |
| toy->toy_endian_plus2 = sim_end + 2; | |
| todr_resync (); | |
| } | |
| return r; | |
| } | |
| /* CLK detach */ | |
| t_stat clk_detach (UNIT *uptr) | |
| { | |
| t_stat r; | |
| r = detach_unit (uptr); | |
| if ((uptr->flags & UNIT_ATT) == 0) | |
| uptr->flags = uptr->flags & ~(UNIT_ATTABLE | UNIT_BUFABLE); | |
| return r; | |
| } | |